Search Results

Search found 31372 results on 1255 pages for 'ubuntu beginner'.

Page 650/1255 | < Previous Page | 646 647 648 649 650 651 652 653 654 655 656 657  | Next Page >

• Boot problems w/ External HDD

  - by JeremyT

  I'm having a problem with booting a live image off of a USB Hard Drive. I used Startup Disk Creator to make an Ubuntu 11.10 live image on a partition on my external so that I can use it on various computers. I set it up with ~4GB of persistent data So far I've tried it on two computers. One, a Dell, will boot to my external but it loads the select boot device very slowly. It hangs on a screen with an underscore for up to 5 minutes until it allows me to select which drive I want to boot from. After that, it works great. However, on my primary computer it doesn't work at all. It's an Acer from 2009 and it won't even recognize the drive. I don't see it anywhere in BIOS or the select boot disk list. The light on the external will come on at boot just fine so I know it's powering it at this time. Both computers worked perfectly with my 4GB flash drive that I had partitioned half and half (1st half FAT32 and second Ubuntu 11.10 live)

  Read the article

• LibreOffice hangs everytime I click into it

  - by Freddy

  I've searched askubuntu for a solution but couldn't find anything helpful for me. I installed the latest version of ubuntu (13.10; 64-bit) yesterday (so I'm relatively new and unexperienced about it) and some programs as well. Today I wanted to try the LibreOffice package which comes with ubuntu by default. So I first started LO Impress, it showed me the default slide where it says something like "Add your title/text here" (I don't know exactly, I'm using my system in German). As soon as i clicked on this text, my entire system didn't react, I couldn't even click the stuff in the upper right corner (where the date, shutdown functions etc. are), nor the items on the launcher bar on the left. After 10 seconds or so, everything seemed to work properly again. But when I clicked into the LO Impress again, the same procedure as described happened again (cmpletely stuck for about 10 sec). Anybody got a solution for this? If you need more information, just tell me. Thanks in advance!

  Read the article

• How to organize music files?

  - by newbie

  I'm trying to re-organize my music files. I copied them from my iPod before it died, so they have funky names, like DGEDH.mp3. I tried using a Windows utility to rename them from their ID3 tags, but it didn't work very well--it created a bunch of folders (one for each album in theory, but more like 7 or 8 in reality) and renamed the files with non-English characters. Most of the files are MP3s, but there's at least one or two other file types as well. I'd like to copy them to a new folder and try a Ubuntu utility to rename and re-organize them. In Windows, this would be straightforward--I'd use the Search function (with no file name specified) to list all of the files in the main folder and its subfolders, then drag and drop them to the new folder. What's the easiest way to accomplish the same thing in Ubuntu? The GUI search doesn't seem to accept wildcard characters, and I don't remember all of the file types I have, so it's not as simple as searching for "mp3". Many thanks!

  Read the article

• LDAP + LTSP 12.04

  - by us3r

  On ubuntu 12.04 i have some kind of problem with LTSP and LDAP. Sometimes I can log to the server, but sometimes I cant (window freezes on LDM) from thin client. Everything is ok when I log to the server like the local machine, but I have some kind of problem on thin client. pam_mkhomedir.so creates home dir, but i cant log..because Nothing happened - ldm freezes. This problem doesnt exist for "local" users (unix accounts) and on first logged LDAP user. It's important to mention that in log I can see nothing special. Does anybody have a problem with ltsp + ldap on ubuntu 12.04? There wasn't any problem on the previous versions. ps sorry for my english skills ;) EDIT: When LDM freezes in the logs there is something: May 17 11:59:52 bar sshd[6066]: Accepted password for student2 from 192.168.100.22 port 44000 ssh2 May 17 11:59:52 bar sshd[6066]: pam_unix(sshd:session): session opened for user student2 by (uid=0) May 17 12:00:03 bar sshd[6315]: subsystem request for sftp by user student2 And nothing other for this user.

  Read the article

• nvidia-settings makes one of my dual monitors grey and useless, disables network

  - by Kerrick

  I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

  Read the article

• Compiling C++ code with mingw under 12.04

  - by golemit

  I tried to setting up compiling of the C++ projects under my Ubuntu 12.04 by mingw with QT libraries. The idea was to get executable independent from variations of target Windows versions and development environments of my colleagues. It was successfully implemented under OpenSuse 12.2 with mingw32 and some additional libraries including mingw32-libqt4 and some others. Fine. However when trying to do the same under Ubuntu 12.04 with mingw-w64 including latest libraries QT-4.8.3 copied from Windows there were always errors. No luck. The typical errors in these attempts can be seen in attachments. The commands used: qmake -spec /path_to_my_conf/win32-x-g++ my_project.pro make Can someone give a hint of the problem source? I would appreciate a good advice. Serge some exctracts from LOG: ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0xec): undefined reference to `QDialog::accept()' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0xf0): undefined reference to `QDialog::reject()' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x104): undefined reference to `non-virtual thunk to QWidget::devType() const' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x108): undefined reference to `non-virtual thunk to QWidget::paintEngine() const' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x10c): undefined reference to `non-virtual thunk to QWidget::getDC() const' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x110): undefined reference to `non-virtual thunk to QWidget::releaseDC(HDC__*) const' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x114): undefined reference to `non-virtual thunk to QWidget::metric(QPaintDevice::PaintDeviceMetric) const' ./.obj/qrc_images.o:qrc_images.cpp:(.text+0x24): undefined reference to `__imp___Z21qRegisterResourceDataiPKhS0_S0_' ./.obj/qrc_images.o:qrc_images.cpp:(.text+0x64): undefined reference to `__imp___Z23qUnregisterResourceDataiPKhS0_S0_' collect2: ld returned 1 exit status

  Read the article

• Radeon 9200 Driver?

  - by usuhh86

  I've been using Linux for a while, but haven't really done more than installed programs. I have Ubuntu 12.04 with an ATI Radeon 9200 graphics card. Ubuntu didn't recognize it during the install. All I want is a driver. Preferably the proprietary driver, but I'll settle for an open-source one if I need to. I went to the AMD support website, and whenever I click on the download link for "ATI Proprietary Linux x86 Display Driver 8.28.8" I get redirected to the main AMD website. I tried this on Firefox, Chrome, even booted up my netbook and tried it on IE9. Does anybody have a download link? And if not, a link to download an open-source alternative? Any help will be greatly appreciated. I'm pretty much still a newbie at this. OpenGL vendor string: Tungsten Graphics, Inc. OpenGL renderer string: Mesa DRI R200 (RV280 5961) x86/MMX/SSE2 TCL DRI2 OpenGL version string: 1.3 Mesa 8.0.2 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: no GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: no Unity 3D supported: no

  Read the article

• Unable to remove the lock by normal means

  - by Loki

  I've been installing ubuntu restricted extras via the software center. Everything was going well at first, but then the installation process froze on 'applying changes' stage. I've had this in the past already, and usually just hitting the 'cancel' button helped, but not this time. Obviously, the install process has placed a lock, and I couldn't issue any apt-get commands. then i've tried doing what was suggested here Fixing Could not get lock /var/lib/dpkg/lock : sudo fuser -cuk /var/lib/dpkg/lock; sudo rm -f /var/lib/dpkg/lock but it seemed to me that it has only killed my X server. Okay, i've just pressed the power button on my PC, and restarted, hoping that the lock was finally off and i could reinstall the stuff. No dice. when I open the software center, I still have one operation in process, a weird one: " Searching | Cancelling ". The 'cancel' button is either inactive, or it just does nothing. So I've become desperate and decided to write here. How do I fix the problem? Can't install anything on a fresh ubuntu 12.04 :) Thanks in advance

  Read the article

• Keeping Xv Overlay configuration throughout an X session.

  - by kriss

  After upgrading my Linux system from Ubuntu 9.04 to Ubuntu 10.10, I suceeded correcting most problems (all related to Intel 82865G Integrated Graphics Adapter support and compiz is still not working but that's another matter) but for one I only have a partial solution. Whenever I play a video the colors are much too saturated. This is really a problem for tones of skins that appears reddish (everyone seems to be coming back from a ski vacation with deep sun burns). As this effect only occurs with videos, not with pictures, I finally figured out it was related to Video Overlays configuration and I can correct it typing: xvattr -a XV_SATURATION -v 120 This change the default saturation value, which is 500 and much too high in my case, at eye sight the correct value seems to be between 100 and 150. Now my problem is that I have to type the above command each time I run a video. If I type it before running the video it has no effect, if I close the video and open a new one, I have to type it again, etc. I tried to put it in Xsession and (logically) it has no effect either. How could I do to get the correct setting whenever I run a video without typing the above command every time ?

  Read the article

• LTS 12.04.1 will not resolve domain.local websites

  - by user108502

  I have done a brand new installation of the Ubuntu server (v12.10) with bind configured to have a dns zone of gdos.local and apache configured for said domain. With a brand new installation of Ubuntu desktop LTS I try to connect to www.gdos.local and all I get is: Server not found Firefox can't find the server at www.gdos.local. Check the address for typing errors such as ww.example.com instead of www.example.com However if I change the domain to gdos.tmp and type in www.gdos.tmp, I get the internal website. If I change it to mybusiness.local , I get the same error message. If I use a Microsoft os, this works fine, all three domains resolve to a webpage. I have searched the internet flat for the past week on dns issues but have not come up with a solution. I have followed instructions from removing dnsmasq to editing like resolv.conf (in some very strange places) and I still have no joy on getting the .local domain extension to work. I can safely say the issue is not with the server but with the desktops because if the issue was server related the Microsoft OS's would not resolve it either. I have done several installs of the desktop in an effort to make sure that I did not break anything while trying to fix this. Please can anyone point to a workable solution for fixing the .local domain extension. Thank you Mark Hollander

  Read the article

• I'm stuck on User Defined Session destop environment

  - by Dan

  I just installed Ubuntu for the first time dual boot so I get to choose Ubuntu or windows. I then changed the setting where is doesn't ask for my password when booting up. I then installed Edubuntu desktop package. I then hit system and logged out that way i could be at the loggin screen that also lets you select the desktop environment. Edubuntu was not there but User defined session was so i clicked that thinking that might be Edubuntu and logged in. Now im totally stuck. Only walpaper on the screen as i realize now that is normal for user defined session but there is no log out button to change desktop environments now and since I set it to not ask for password at boot up there is no option to change it at start up. If i hit ctrl+alt+del it only lets you shutdown, restart, suspend, or hybernate.... no logg out. I have hit every key on the keybourd hoping something will pop up. I thought this must be a simple noob mistake that there must be endless artiles about this so did searches on google and forums and was shocked to find nothing about this. My next step unless someone can help is to uninstall and reinstall.

  Read the article

• File permission issues after setting up an amazon ec2 instance

  - by Pardoner

  I've set up an amazon ec2 instance and I'm have some file permission issues. I've created myself a new user and added myself to the following groups: adm:x:4:me,ubuntu www-data:x:33:me,www-data ssh:x:108:me admin:x:111:me ubuntu:x:1000:www-data,me me:x:1001:me but when I cd /var/www I can't do simple commands without doing sudo first. So I chmod -R www-data:www-data /var/www to ensure that I'm in the owning group but I still have to type sudo for everything. If I sudo su www-data it works fine. Since I'm in the www-data group shouldn't I have the same privilages as www-data? One strange thing I'm noticing is that when I ls -l it list the owner but not the group names. Could this possibly be part of the issue? Is is posible for a directory to not be part of a group? drwxr-xr-x 4 www-data 4.0K Oct 24 16:39 . drwxr-xr-x 14 root 4.0K Oct 10 16:58 .. drwxrwxr-x 9 www-data 4.0K Oct 23 04:03 admin.mywebsite.com drwxrwxr-x 2 www-data 4.0K Oct 4 00:29 mywebsite.com drwxrwxr-x 9 www-data 4.0K Oct 23 04:03 staging.mywebsite.com

  Read the article

• Resize a pendrive Linux?

  - by user11239

  I'm running Ubuntu from USB media, which has a drive capacity of 250 GB, all existing as one FAT32 partition. However, when I created the bootable Ubuntu drive, only 4.79 GB were allocated for usage. Rather than put files directly into the /cdrom where the drive is mounted, I want to expand what is listed here in aufs to be at least 200 GB. I'm hopeful that I can do this live. Output of df : Filesystem 1K-blocks Used Available Use% Mounted on aufs 4051904 4050108 0 100% / none 1542852 284 1542568 1% /dev /dev/sdb1 244076800 4901648 239175152 3% /cdrom /dev/loop0 688000 688000 0 100% /rofs none 1547840 1496 1546344 1% /dev/shm tmpfs 1547840 4828 1543012 1% /tmp none 1547840 80 1547760 1% /var/run none 1547840 0 1547840 0% /var/lock none 1547840 0 1547840 0% /lib/init/rw Output of fdisk -l : Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00083fe4 Device Boot Start End Blocks Id System /dev/sdb1 * 1 30401 244196001 c W95 FAT32 (LBA) So basically what I want to do is get /dev/sdb1 to be entirely, or almost entirely read as aufs. I'm confused over how to do this, as the file systems are all part of /dev/sdb1 on one big partition, rather than separate partitions for separate file systems.

  Read the article

• My card reader doesn't show up at all, but previously did in 10.10

  - by Nathan J. Brauer

  I bought a pin-based-USB powered internal media card reader and it worked perfectly when I first installed Ubuntu 10.10 a month ago. I used it a few times since and today I booted up the computer and it's not working. Here's how it used to work: In nautilus->computer, 5 "drives" would display even when no card was inserted. One for each slot (SD, XD, CF/MS, etc). Opening one w/o a card would initiate a "Please insert card." dialog. Inserting a card would automatically open nautilus. Now: No drives display at all whether cards are inserted or not. lsusb lists the following (which seems to indicate that it's not being detected) Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 046d:c52e Logitech, Inc. (my keyboard/mouse) Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub (A side note, all of my USB ports are 2.0 + 1 USB port which is 3.0, why does everything say 1.1/2.0?) I tried using ubuntu-bug but for USB devices it expects you to be able to remove and insert them while the computer is running -- obviously something you probably shouldn't be doing when you're dealing with devices plugged straight into the USB pins. Thanks in advance!

  Read the article

• Dell Alps Touchpad not working

  - by ppls

  I have a Dell 17R SE with Ubuntu 13.04. The touchpad is recognized as PS/2 mouse out of the box, giving just normal touchpad behaviour, but no tap to click, no scrolling, etc. Most answers related to that issue suggest trying an ALPS driver from dahetral.com: http://www.dahetral.com/public-download For installing I followed the steps on this page: https://www.linuxwind.org/html/dell-touchpad-driver-for-ubuntu-13-04.html Now my xinput looks like this: Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Mouse id=13 [slave pointer (2)] ? ? AlpsPS/2 ALPS GlidePoint id=14 [slave pointer (2)] ? ? Logitech Bluetooth Mouse M555b id=16 [slave pointer (2)] My touchpad isn't working at all now, just the two hardware buttons for left and right mouse buttons work. Interestingly also the tap to click functions works, but only in the address bar of nautilus, nowhere (!) else. What can I do? I would even switch back to initial state, where at least the basic touchpad functionality worked, i I knew, how to get there.

  Read the article

• Can't use nvidia card/driver on optimus notebook

  - by Mr. Pixel

  I installed (once again) the latest official nvidia driver for my GT540m on Ubuntu 11.10. Even though everything seems OK with my xorg.conf file (I've manually added BusID "PCI:1:0:0", since lspci shows 01:00.0 for my GPU). The problem is, when I use the xorg.conf file generated by Xorg -configure, Xorg automatically loads the Intel GPU. So I removed everything that was not related to my nvidia card, basically leaving my xorg.conf with one screen and one device (with the nvidia driver and the above-mentioned BusID), and Xorg fails to start. The log says something like "Devices on GT540m [newline] none" And a few lines later, something like "NVIDIA(0) found a screen, but have no device for it". When I don't set the BusID, it doesn't seem to detect my card either. Thank you for any suggestion. PS: If possible, I'd like to avoid bumblebee or any similar "hybrid graphics" solution, last time I tried I ended up reinstalling Ubuntu. Edit: Allow me to clarify the problem. I have a notebook with a GT540m graphics card, and an integrated intel gpu. I want to use the graphics card with full hardware acceleration and its official driver, as I do under windows.

  Read the article

• Can I set my Optimus Nvidia card to run Unity3D with bumblebee?

  - by manuhalo

  I'd like to know whether I can run compiz on my Nvidia card to speed things up. It's a Dell XPS15 laptop but I'm mostly using it as a desktop, so battery life is not important. Apparently my Intel integrated card is able to run unity 3D, but my Nvidia GT 420M is not. Here's the output of unity_support_test, both with optirun and without it: manuhalo@Ubuntu-XPS-L501X:~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 420M/PCI/SSE2 OpenGL version string: 4.1.0 NVIDIA 280.13 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no manuhalo@Ubuntu-XPS-L501X:~$ /usr/lib/nux/unity_support_test -p OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ironlake Mobile OpenGL version string: 2.1 Mesa 7.11 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes Any ideas of why this is happening? Thanks in advance to anyone able to shed some light on this. What I have tried: Installed the v290 drivers from the x-stable PPA. Tried forcing Unity-3D to work by telling Unity to ignore the unity-support-test results i.e. gksudo gedit /etc/environment add the following UNITY_FORCE_START=1 to the end of the file.

  Read the article

• Hosting Bazaar shared repositories

  - by Kishor Kundan

  What i want ? We operate in a small team of 9 people including developers, QA and designers. I want to setup a version control. We have a ubuntu (server edition) and i want to host all our repositories there. I have no understanding that even if it is possible. What I have done? We have setup bazaar on all distributions. We are using Bazaar explorer as our gui front-end. The command edition from console isn't very comfortable to all members. We have gone through the manual, but it hasn't been very helpful. Our inexperience being the cause. Team The designers are using windows distribution and developers & QA are using ubuntu distributions. I have googled around and i am really struggling to find a good tutorial for this setup. So any links/guides/leads towards accomplishing the same would be very helpful. While posting links or answer please do consider our inexperience. Thank you !!! cheers

  Read the article

• Problem installing drivers for Brother DCP-1400

  - by ToddB

  I have a problem installing drivers for my DCP-1400 printer. I am using Ubuntu 11.10 and am new to Ubuntu and Linux in general. I downloaded the lpr and cupswrapper files from the Brother linux site into my Download directory. I next run Terminal and switch to the Downloads directory. At the prompt I type in the following: sudo dpkg -i --force-all dcp1400lpr-1.1.2-1.386.deb It asks for my password which I type in and press Enter. I get the following errors: (Reading database ... 155195 files and directories currently installed.) Preparing to replace dcp1400lpr 1.1.2-1 (using dcp1400lpr-1.1.2-1.i386.deb) ... Unpacking replacement dcp1400lpr ... /var/lib/dpkg/info/dcp1400lpr.postrm: 3: /etc/init.d/lpd: not found dpkg: warning: subprocess old post-removal script returned error exit status 127 dpkg - trying script from the new package instead ... /var/lib/dpkg/tmp.ci/postrm: 3: /etc/init.d/lpd: not found dpkg: error processing dcp1400lpr-1.1.2-1.i386.deb (--install): subprocess new post-removal script returned error exit status 127 /var/lib/dpkg/tmp.ci/postrm: 3: /etc/init.d/lpd: not found dpkg: error while cleaning up: subprocess new post-removal script returned error exit status 127 Errors were encountered while processing: dcp1400lpr-1.1.2-1.i386.deb I now notice when I open the Synaptics package manager I get the message: E: The package dcp1400lpr needs to be reinstalled, but I can't find an archive for it. E: Internal error opening cache (1). Please report. Any help provided would be appreciated. Thank you TB

  Read the article

• Installing nvidia drivers causes computer to boot to command prompt.

  - by levesque

  Hi, I have an Asus u30jc laptop, which comes with the Optimus prime graphics card switching technology that is now supported under 2.6.35, so I decided to give it a try. First I made sure the discrete graphics card was activated and then I installed the drivers proposed by the ubuntu software repository (nvidia-current). However, after rebooting all I got was a command prompt. My graphics card is a nvidia 310M. This is on Ubuntu 10.10 64 bits. What can I do to diagnose/identify the source of this problem? UPDATE: The messsages in my syslog tell me to check the xorg log: Oct 11 12:42:59 u30jc-test gdm-binary[1095]: WARNING: GdmDisplay: display lasted 0.053144 seconds Oct 11 12:42:59 u30jc-test gdm-simple-slave[1450]: WARNING: Unable to load file '/etc/gdm/custom.conf': No such file or directory Oct 11 12:42:59 u30jc-test gdm-binary[1095]: WARNING: GdmDisplay: display lasted 0.038176 seconds Oct 11 12:42:59 u30jc-test gdm-binary[1095]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors Which I did. I found this message in my /var/log/Xorg.0.log : Fatal server error: [ 113.540] no screens found [ 113.540] What does that mean?

  Read the article

• How to update Adobe's software unattendedly?

  - by jubel

  I would like to use unattended-upgrade to update the Adobe Reader, Flash Player and everything else of the Canonical partners. There fore, I added in /etc/apt/apt.conf.d/50unattended-upgrades Unattended-Upgrade::Allowed-Origins { "${distro_id} ${distro_codename}-security"; "${distro_id} ${distro_codename}-updates"; "Canonical ${distro_codename}"; // "${distro_id} ${distro_codename}-proposed"; // "${distro_id} ${distro_codename}-backports"; }; sudo unattended-upgrade --dry-run -d says Initial blacklisted packages: Starting unattended upgrades script Allowed origins are: ['o=Ubuntu,a=oneiric-security', 'o=Ubuntu,a=oneiric-updates', 'o=Canonical,a=oneiric'] Checking: acroread-common (["<Origin component:'partner' archive:'' origin:'' label:'' site:'archive.canonical.com' isTrusted:False>"]) Checking: adobe-flash-properties-gtk (["<Origin component:'partner' archive:'' origin:'' label:'' site:'archive.canonical.com' isTrusted:False>"]) Checking: adobe-flashplugin (["<Origin component:'partner' archive:'' origin:'' label:'' site:'archive.canonical.com' isTrusted:False>"]) Checking: adobereader-deu (["<Origin component:'partner' archive:'' origin:'' label:'' site:'archive.canonical.com' isTrusted:False>"]) Checking: handbrake-cli (["<Origin component:'main' archive:'oneiric' origin:'LP-PPA-stebbins-handbrake-snapshots' label:'HandBrake Snapshots' site:'ppa.launchpad.net' isTrusted:True>"]) Checking: handbrake-gtk (["<Origin component:'main' archive:'oneiric' origin:'LP-PPA-stebbins-handbrake-snapshots' label:'HandBrake Snapshots' site:'ppa.launchpad.net' isTrusted:True>"]) Checking: sopcast-player (["<Origin component:'main' archive:'oneiric' origin:'LP-PPA-ferramroberto-sopcast' label:'LffL Sopcast' site:'ppa.launchpad.net' isTrusted:True>"]) pkgs that look like they should be upgraded: Fetched 0 B in 0s (0 B/s) blacklist: [] InstCount=0 DelCount=0 BrokenCout=0 No packages found that can be upgraded unattended And it won't update. How can I update the third-party software automatically?

  Read the article

• I don't know how to connect to the internet

  - by Michiel

  I'm having some trouble finding an answer to my problem. I have a dell desktop (studio hybrid) and i have windows vista on it. The internet on windows vista works great, no problem. But now i downloaded Ubuntu 11.10 and I'm having problems. I can't find how to connect to my wireless network, when i click the network icon, it shows a list of things but I can only click 'enable wireless network' or something like that and 'edit connections'. But in this list it also says ( in a grey collor and i can't click it ) : 'No wireless connection, device not ready (firmware missing)" Or something like that. Now i tried several things i read on the internet (using my vista OS cause i can't use ubuntu for the internet, which is really enoying). But none of them helped me. I would like someone to tell me what my problem is or what information I have to give you to get an answer. So tell me if i have to edit a connection, or tell me how i have to get the wireless connection to work and to repair the 'firmware missing problem'. I hope someone can/is willing to help me. Bye

  Read the article

• Cannot ping any computers on LAN

  - by Timothy

  I havem't been able to find a straight forward answer on this yet. I'm hoping people here are able to help! Keep in mind that I'm a complete beginner at this - this is the first installation i've done for any LINUX systems ever so please keep that in mind when answering this question. We are a complete Windows shop, using nothing but Microsoft products but looking into the value of OpenStalk however have been having problems getting Ubuntu Server installed and speaking to the network. The machine is getting an IP address which is telling me that some sort of DHCP activity is working but I'm not able to ping any computer on our network as well as not able to connect to the internet. Every time I try to ping i'm getting; Destination Host Unreachable I've tried using modifying the resolv.conf file with our static details to match my Windows 7 machine still with no luck. Even tried disabling the firewall on Ubuntu Server 11 and no luck. Any ideas? Please let me know if there is any information you need from the server and I'll post up.

  Read the article

• How do I install the EW-7318Ug wireless drivers?

  - by user69731

  I'm on Ubuntu 12.04 and I need to install & configure Internet connection. I want to use montor mode in Wireshark. After Ubuntu installation my wireless card was recognized but it doesn't connect to the Internet. Internal wireless card works well. What should I do? I'm new to Linux. PC:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 64:31:50:0f:d4:70 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 Base address:0x8000 eth1 Link encap:Ethernet HWaddr e0:2a:82:aa:2d:3e inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::e22a:82ff:feaa:2d3e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20978 errors:0 dropped:0 overruns:0 frame:364651 TX packets:20949 errors:171 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19299119 (19.2 MB) TX bytes:3024858 (3.0 MB) Interrupt:19 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4788 errors:0 dropped:0 overruns:0 frame:0 TX packets:4788 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:387017 (387.0 KB) TX bytes:387017 (387.0 KB) wlan1 Link encap:Ethernet HWaddr 00:1f:1f:44:c1:a4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:10508 errors:0 dropped:0 overruns:0 frame:0 TX packets:6143 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14831319 (14.8 MB) TX bytes:644606 (644.6 KB) PC:~$ iwconfig lo no wireless extensions. wlan1 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:225 Noise level:162 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions.

  Read the article

• Slow USB 3.0 speeds

  - by Cygnus X

  Long time forum forager, first time poster. I bought a Toshiba 500 GB usb 3.0 hard drive last week and instantly ran home to see how fast I could push it. On my desktop (that I built) I was able to get 200 MB/sec. On my laptop (MSI FX something or other), which I dual boot Windows 7/Ubuntu 11.10, I was able to get about 120 MB/sec on Windows, but on Ubuntu, i get about 25 MB/sec. lsusb shows: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Bus 002 Device 003: ID 1532:0015 Razer USA, Ltd Bus 004 Device 002: ID 0480:a007 Toshiba America Info. Systems, Inc. lspci -vvv shows that the USB 3.0 host controller is using the kernel driver in use is xhci_hcd. dmesg |grep usb shows: [ 1815.455368] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1815.475459] scsi7 : usb-storage 4-1:1.0 The built in disk utility says its connected via usb at 705 MB/s, but that's not what it reports when I transfer files over to it. Not really sure what to do at this point. Any help would be very nice, thank you.

  Read the article

< Previous Page | 646 647 648 649 650 651 652 653 654 655 656 657  | Next Page >