Search Results

Search found 22600 results on 904 pages for 'remote connection'.

Page 652/904 | < Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659  | Next Page >

• Windows XP does not list WPA wireless networks

  - by Tomalak

  What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

  Read the article

• Why is my ipad's wireless so flakey?

  - by Mark

  I'm the proud owner of a new IPad here in the UK. All is good, except for the wifi, which is a bit flakey. It connects fine to my Draytek router which is set for WPA/WPA2 and 56g only, displaying full signal strength. Then, after a few minutes, it goes down to minimum strength... And sometimes it goes back up again. A few times, it seems to loose connection completely, and needs to be turned off and on again. I've looked at the Apple support site, and have tried their recommendations (which are not really very relevant), but still nothing. I've tried setting the router to wpa2 only, and setting long-preamble. Right now, I guess I want to know if it's a hardware problem with my device and should be returned, or if it's a problem with all ipads which will be resolved. Guess I could take it back to the Mac genius bar, but I find those guys so incredibly pretentious and, frankly, rather useless, that i'd rather wait until I've exercised other options!

  Read the article

• How do I require use of the 5 GHz band when connecting to a Wireless N access point?

  - by cqcallaw

  What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

  Read the article

• Huwawei E220 broadband dongle not working

  - by Roshnal

  The problem is, I have used Ubuntu from 6.10 upto 11.10. And upto 11.04 I used my same USB 3G dongle to connect to broadband and it worked fine. But 2 days ago I upgraded to Ubuntu 11.10 and broadband is not working. It detects my dongle and creates a connection without a problem, but when connecting it just keeps on and on for a long time and then say I'm offline. So I did a clean install and the same thing occurred. But I also have a netbook and its got Ubuntu 11.10. I tried using the same dongle for internet on that netbook and it worked fine without any issues. But this isn't a problem with my USB port on my main machine or something like that because I'm also using Windows on my main machine (dual-boot) and its working fine. My hardware: Main computer (one that I'm trying to connect): 2.8GHz dual core Intel 2GB RAM 500GB Sata II HDD 384MB Video Memory (Intel G31/G33 chipset) Ubuntu 11.10 (32bit) My NetBook (broadband working fine): 1.6GHz Intel Atom (dual core) 1GB DDR3 RAM 250GB HDD 128MB Video Memory (Intel something-I-can't-remember) Ubuntu 11.10 (32bit) My dongle is a Huawei E220 and ISP is Dialog GSM (I'm in Sri Lanka) So any idea why this is? I really love Ubuntu and this is bugging me off.. Any help greatly appreciated. Regards, Roshnal

  Read the article

• How do i mitigate DDOS attacks on static servers?

  - by acidzombie24

  Here is a slightly different take on DDOS attacks. Rather than a server with dynamic content being attack i was curious how to deal with attacks on servers with STATIC CONTENT. This means cpu tends to not be an issue. Its either bandwidth or connection problems. How would i mitigate a DDOS attack knowing nothing about the attacker (for example country, ip address or anything else). I was wondering is shorting the timeout and increasing amount of connections is an acceptable solution? Or maybe that is completely useless? Also i would limit the amount of connections per IP address. Would the above help or be pointless? Keeping in mind everything is static checking for multiple request of the same page (html, css, js, etc) could be a sign of a attack. What are some measures i can take on a static content server?

  Read the article

• Windows - Force Wi-Fi to N mode

  - by Frederick Marcoux

  I bought a month ago the D-Link DWA-160 Xtreme N Dual Band USB Adapter and I wonder about the speed. I have a 60Mbps but the speed is never above 300Kbps when I browse Internet or download something. Even from Microsoft or Apple (the fastest server I found). Now on Windows 8, we can see the Wi-Fi stats in Task Manager, there they are: Notice the red rectangle. The signal is 3/5 and I'm about 5 meters far from my router. An Apple Time-Capsule. Also, the connection type is 802.11g, I want N. I made this config in my Device Properties: Does anyone figured out to force the 802.11n in Windows? (Windows 8 preferably)

  Read the article

• Apache Prepending Header Information to ALL FILES

  - by Michael Robinson

  We're in the middle of setting up new servers, and have been having some odd problems with Apache. Apache is prepending text that looks like this: $15plðI‚‚?E?ðA™@?@??yeÔ|~Ÿ²?PγZ" zS€?8i³?? ,ÀŠ{ÿBHTTP/1.1 200 OK Date: Mon, 02 Feb 2009 22:28:05 GMT Server: Apache/2.2.3 (CentOS) Last-Modified: Mon, 02 Feb 2009 22:28:05 GMT ETag: W/"1238007d-2224e-fe617f40" Accept-Ranges: bytes Content-Length: 139854 Connection: close Content-Type: application/x-javascript To all files. The file I copied the above text from is the prototype library js file. As loaded from our server. I've searched, but couldn't find much about this problem Maybe I don't know what I'm searching for... Anyway, if anyone has seen this behaviour before, could they please let me know either 1) how to fix it so that this content is not prepended to all files, or 2) where to look for further help. Thanks

  Read the article

• Issues with FTP on my server

  - by homestead

  I installed FTP on my windows 2003 box I created a FTP site on a ipaddress, I am not allowing anonymous access. I created a user that has access to the folder c:\ftptest connecting to my server using filezilla shows: connectiong to -0.0.0.0 connection established, waiting for welcome message could not connect to server I tried both active and passive modes. The port on the server is open i.e. TCP 21 I can connect to other FTP sites so my locla firewall isnt' the issue. (now I know why sys admin work is so fun!)

  Read the article

• How to show disconnect network drives

  - by Jake

  Windows 7 and Vista laptops in my company domain has network drives set up by Win2k8 Server GPO. Normally, when the laptops has ethernet cable plugged in before boot, the network drives connect and appear as expected at the end of startup sequence. However, when the laptop has ethernet cable unplugged, the network drives are not connected, which is fine, but the disconnected icons disappear as well. i.e. the drives are not set up. At the end of the startup sequence, upon reaching desktop, the wireless adapters will connect to the network and the laptop will be able to find the network drive. Hence I want the drives to be setup nonetheless, so that the next attempt to connect, say, via a desktop shortcut, will reestablish the network drive connection. How can this be done?

  Read the article

• Chrome - Why am I automatically authenticated to a web app even after clearing browser cookies?

  - by Howiecamp

  I am accessing a web application using Chrome. If I sign out of the app and clear all Chrome history/cookies/etc (even Flash cookies which are now handled by Chrome in the same Clear History area) and then re-access the site, I am automatically logged in without being prompted for credentials. I then launched Chrome in Incognito mode and was able to reproduce the same behavior. However, the I was prompted upon the first logon while in Incognito mode. The web application behaves as expected in Internet Explorer 10. Some info about the application: It's a Sharepoint site using NTLM authentication The credentials are Active Directory-based, as the username is domain\username My connection is over the Internet and there is no AD relationship between my local Windows account, my Windows PC. In other words I (meaning my locally logged on user and my PC) are not in any way part of their AD domain. The site is running SSL on port 443 Why might Chrome be automatically authenticating me?

  Read the article

• How to install GNOME desktop from DVD on CentOS 6 using the command line?

  - by alwbtc

  I have installed CentOS 6 in Virtualbox. Although I have chosen to install General Purpose GNOME Desktop, the GNOME desktop does not start. All I get is a black and white text prompt. I would like to know how I can install GNOME Desktop from the CentOS DVD. How do I mount the DVD image? How do I install GNOME desktop from command line? If I already have the GNOME Desktop installed, why doesn't it start? How can I check from command line that I have GNOME installled? This virtual machine does not have internet connection, that's why I want to install the GNOME Desktop from DVD.

  Read the article

• BITS http download job fails to connect for owner Local SYSTEM account

  - by MikeT

  A service I have written that uses BITS (Background Intelligent Transfer Service) to auto update itself is having a problem on some machines (Windows 7 so far). I have been investigating and have discovered that some of the jobs that my service adds to the bits queue are failing immediately with the error code 0x80072efd (a connection with this server could not be established). The is not problem with connecting to the server for the download as it works fine on the same machine using IE (or any other web browser) and other clients can connect and update from the same server. I tried using the BITSADMIN.exe tool to add the jobs manually and they worked ok. I then changed the account my service was running under to the network service account so the bits jobs would be created with a different owner and the jobs completed successfully. My question is I don't want to run my service as this account as it wont have the required local permissions, so how to I change the permissions of the local system user to allow it to download from the HTTP source, I'm not aware of any way of this being restricted for this account but it obviously is.

  Read the article

• SQL server periodically gets disconnected

  - by Maulin

  Hi, Our environment is: Windows Server 2003, Service Pack 2 SQL Server Express 2005 SQLServer JDBC driver 1.2 (also tried Jtds) Sun JDK 1.6 (we tried this on JDK 1.5 as well) There is no virus protection software on the host, and no firewall is enabled. We have Web application deployed in JBOSS 4.0.2. Our problem is that the JDBC connection to SQL server periodically gets disconnected, and then we can't reconnect to the SQL server at all, unless we physically restart the server on which JBOSS deployed. we are getting following error in log. Software caused connect on abort: recv failed Note: We are able to connect to SQL server using sample java test class. Any suggestions would be most appreciated, as this is a serious, mission-criticial problem for us right now.

  Read the article

• Internet Exploer 8 - Internet Access Issue

  - by Paresh.Bijvani

  Hello, I am using IE8 since last 6 months and its working fine. I am using it by providing proxy server address. Suddenly it started not working today. Strange thing is that it fails to communicate with proxy server. It still work if I use modem as internet connection, its just has problem with proxy server communicationl. Even my Firefox is working fine. And all installed application like Yahoo Messanger and skype working fine. I also uninstalled and reinstalled, but no luck. Any work around? Have anybody faced this issue? Thanks Paresh

  Read the article

• Plesk 9 VPS - Doesn't reply to NameServer requests (nslookup, etc)

  - by Ben

  Hi, I'm trying to troubleshoot a problem with a new VPS i'm setting up. The VPS is running Plesk 9 on a CentOS 5 system. Everything works fine, except it doesn't serve dns requests. If I try something like nslookup [somedomain.com] the.ser.ver.ip to test a DNS query, i get the following error ;; connection timed out; no servers could be reached I can't telnet to it on port 42 either.. I'm guessing something is blocking the requests.. firewall maybe? the plesk firewall module is installed and the nameservers entry is green. Any other way I can check what's blocking it on the server? Any help/tip greatly appreciated. Note: http works, i can telnet to the server on port 80 and i can also ping the server Thanks

  Read the article

• Can I distribute a software with the following permission notice

  - by Parham

  I've recently written a piece of software (without any other contributors) for a company which I part own. I was wondering if I could distribute it with the following permission notice, which is a modified version of the MIT License. Are there any obvious risks if I do distribute with this licence and does it give me the right to reuse the code in other projects? Permission is hereby granted, to any person within CompanyName (the "Company") obtaining a copy of this software and associated documentation files, excluding any third party libraries (the "Software"), to deal with the Software, with limitations restricted to use, copy, modify and merge, the Software may not be published, distributed, sublicensed and/or sold without the explicit permission from AuthorName (the "Author"). This notice doesn't apply to sections of the Software where copyright is held by any persons other than the Author. The Author remains the owner of the Software and may deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software. The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

  Read the article

• Iptables mark incoming packet - vpn routing

  - by Tom

  I have connected my home to my workplace for out of house backup reasons through openvpn. The connection is working nicely. At work I have 5 fixed IP addresses. Now I would like to assign one of these IP addresses to be forwarded to my home machine. I have confirmed packet arrival at my home machine with tcpdump. The problem is that my default route at home is NOT the tun0 (naturally), but eth0 to my own ISP. So I created a separate routing table to route my tun0 packets back to where they belong, but do not how to mark the incoming packet which arrive through tun0 with iptables, so I can drive them back. I do not want any port restrictions, but only what comes from tun0 should leave through tun0 thanks tom

  Read the article

• Exchange 2010 Deployment Notes - ISA 2004 Server Issue

  - by BWCA

  An interesting ISA 2004 tidbit … While we were setting up our Exchange 2010 ActiveSync environment, we encountered a problem where we could not successfully telnet over port 443 from one of our ISA 2004 Servers to our Exchange 2010 Client Access Server Array. When we tried to telnet over port 443 from the ISA Server to the Client Access Server Array name, we would get a “Could not open connection to the host on port 443: Connect failed” error message. Also, when we used portqry over port 443 from the ISA Server to the Client Access Server Array name, we would get a “Error opening socket: 10065” and “No route to host” error messages. It was odd because we did not have any problems with using ping or tracert from the ISA Server to the Client Access Server Array and our firewall firewall policy was allowing 443 traffic to pass through. After some troubleshooting, we were able to telnet and use portqry over port 443 successfully if we stopped the Microsoft Firewall service on the ISA 2004 Server.  So, it was strictly a problem with ISA.  Eventually, we were able to isolate the problem to a ISA 2004 Server System Policy setting as shown below (to modify the System Policy, right-click Firewall Policy and click Edit System Policy). Under the Diagnostics Services – HTTP Connectivity verifiers Configuration Group, you need to enable the configuration group under the General tab to resolve the problem.  After we enabled the setting, we no longer had a problem.

  Read the article

• Ubuntu crashes with menu bar launcher freeze during software centre use

  - by UbunUser

  I recently reinstalled Ubuntu 12.04 LTS on a Dell Studio 1588 64-bit and ran into crashes as I was installing some software on the software centre. Before this, I had display/screen problems that I needed to fix so I will briefly describe that in case it has any connection to the crashes. The problem was of screen crash/flickering (related to ATI Mobility Radeon HD 5400x) when trying to adjust brightness and so I followed guidance from an earlier chain (question 131967) to (a) use jockey to install fglrx update driver (deactivate experimental beta driver) and (b) edit grub to add acpi_backlight=vendor dell_laptop.backlight=0 The crashes that happened (twice, while software centre was just finishing installation in the background) was that all tabs (on open Firefox window) stayed open along with cursor control with mousepad but all menu bars disappeared completely along with the launcher and the keyboard also turned unresponsive. So there seemed to be no way to close windows or shut down the computer except for a forced hard shut down of the system using the start button. This is very similar to Questions #167540 and #298843, which seem to be closed. Why is this happening? Is there some update or fix I need to make? Thanks!

  Read the article

• Windows 8 mail cause event 529 when connect to exchange

  - by holian

  I set my company exchange mailbox in Windows 8.1 mail. (outsite). Everything works fine, but after i start the Windows 8.1 mail i get event with id 529 in the security log continously. Reason: Unknown user name or bad password Username: [email protected] range: Type of login: 8 Logon Process: Advapi Authentication Package: Negotiate Workstation Name: SERVERNAME Caller User Name: SERVERNAME $ Calling range BAR NUL Caller Logon ID: (0x0, 0x3E7) Caller Process ID: 4384 Transmitted services: - Source Network Address: 56.43.213.122 Source Port: 55 698 If i close windows mail, events stop flooding the security log in the server. Connection parameters in windwos 8: email:[email protected] password domain:company.local username:myemail server:mydomain.dyndns.org SSL:yes. Any idea whats the problem? I can check my mail, with the same setting on my android phone without any problem. Thank you

  Read the article

• Waht are the best proxy servers for Mikrotik router?

  - by niren

  I want to setup proxy server for my Mikrotik router. There is inbuilt web-proxy for Mikrotik router but I can extend this upto transparent proxy(kind of proxy server) only. We need High anonymity proxy so that we can hide our LAN static IPs(we don't have private IP) from outside Intruder/hackers. And also I know I can setup NAT rule to hide our IP(only private IP not public/static IP) as per this link, but I cann't hide static/public IP. Essentially I want to hide our Public/Static IP (there is static/public IP for all systems in our company) from outside Internet. To achieve this I guess I need other software apart from Mikrotik router gateway setup. can anyone suggest me Is there any other software to achieve my requirement? I know about squid proxy but am not sure whether It can hide our static/public IP. Note: we have assigned public/Static IP to all systems of our company since we have rights to access our company's system from anywhere by dedicated laptop(given by our company with more security) through VPN connection.

  Read the article

• How can I avoid a 302 for Fetch as Bot?

  - by CookieMonster

  I originally posted this on Stackoverflow, but I believe here is a better place to ask. My web application is very similar to notepad.cc which redirects to a randomly generated URL upon access, e.g. http://myapp.com/roTr94h4Gd. (Please note that notepad.cc is not my site.) Probably because of this redirect feature, when I do "fetch as Google" or "fetch as Bingbot", I get a 302 and no html content. Not even a <html></html> tag. HTTP/1.1 302 Moved Temporarily Server: nginx/1.4.1 Date: Tue, 01 Oct 2013 04:37:37 GMT Content-Type: text/html Transfer-Encoding: chunked Connection: keep-alive X-Powered-By: PHP/5.4.17-1~dotdeb.1 Set-Cookie: PHPSESSID=vp99q5e5t5810e3bnnnvi6sfo2; expires=Thu, 03-Oct-2013 04:37:37 GMT; path=/ Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Location: /roTr94h4Gd How should I avoid 302 in this case? I suppose I could modify my site to prevent the redirect, but it is a necessary feature of my web app to generate a random URL on each access. I added <meta name="fragment" content="!"> tag into my index page and set it to return a static snapshot of my page when the flag is set. But this still returns a 302. I also added a header to return 200 before redirecting, but this had no effect, either. Could someone tell me a good suggestion to solve this problem?

  Read the article

• Customizing the windows server 2008 RDP login screen possible?

  - by moontear

  Hi, I'm working with RDP sessions quite frequently. As we work in teams and all use the same user account on a particular computer (I know...) I was wondering if there was a way to display from which computer (hostname, computername) the person is connecting. The login screen I get when two users are already connected looks like this (german): I'd love it, if the screen would display from where the logged in user is connecting e.g. "COMPUTER\user connected from MYCOMPUTERNAME". This way I would know whom to ask to disconnect so I can hop onto the session. If I remember correctly the login screen looked different for previous Windows versions including this connection information. Any way I can easily enable this or is this just standard windows behavior and there is no way to tell from where the user is connecting (btw: Task Manager shows the computername of the connected user).

  Read the article

• Raspberry Pi Now Shipping with 512MB RAM; Still Only $35

  - by Jason Fitzpatrick

  Fans of the tiny Raspberry Pi will be pleased to hear the new version of their Model B board now ships with 512MB of RAM (up from the previous 256MB). The best part about the upgrade? The price point stays at $35 a board. From the official Raspberry Pi blog: One of the most common suggestions we’ve heard since launch is that we should produce a more expensive “Model C” version of Raspberry Pi with extra RAM. This would be useful for people who want to use the Pi as a general-purpose computer, with multiple large applications running concurrently, and would enable some interesting embedded use cases (particularly using Java) which are slightly too heavyweight to fit comfortably in 256MB. The downside of this suggestion for us is that we’re very attached to $35 as our highest price point. With this in mind, we’re pleased to announce that from today all Model B Raspberry Pis will ship with 512MB of RAM as standard. If you have an outstanding order with either distributor, you will receive the upgraded device in place of the 256MB version you ordered. Units should start arriving in customers’ hands today, and we will be making a firmware upgrade available in the next couple of days to enable access to the additional memory. We’re excited to get our hands on a new board and try out Raspbmc with that extra RAM. HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• YSLow says certain CSS are not gzipped

  - by rhand

  YSlow keeps on telling me files like http://www.example.com/wp-content/plugins/q-and-a/css/q-a-plus.css?ver=1.0.6.2 are not gzipped while the gzip test tool at Feed the Bot mentions I am all good: Compressed? Yes Compression type gzip Page size (Bytes) 32,493 Compressed size (Bytes) -1 Saving (Bytes) 32,494 Compression % 100% I added this to my .htaccess: # Gzip <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file .(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> #Deflate <ifmodule mod_deflate.c> AddOutputFilterByType DEFLATE text/text text/html text/plain text/xml text/css application/x-javascript application/javascript </ifmodule> The header for the file mentioned states: CF-Cache-Status MISS CF-RAY 13945df90a9a0c1d-AMS Cache-Control public, max-age=2592000 Connection keep-alive Content-Encoding gzip Content-Type application/javascript Date Thu, 12 Jun 2014 07:34:38 GMT Expires Sat, 12 Jul 2014 07:34:38 GMT Last-Modified Thu, 21 Feb 2013 01:29:18 GMT Server cloudflare-nginx Transfer-Encoding chunked Vary Accept-Encoding Any ideas what I am missing here?

  Read the article

< Previous Page | 648 649 650 651 652 653 654 655 656 657 658 659  | Next Page >