Search Results

Search found 16940 results on 678 pages for 'disk drive'.

Page 655/678 | < Previous Page | 651 652 653 654 655 656 657 658 659 660 661 662  | Next Page >

• Dealing with "I-am-cool-and-you-are-dumb" manager [closed]

  - by Software Guy

  I have been working with a software company for about 6 months now. I like the projects I work on there and I really like all the people there except for 1 guy. That guy is technically smart, and he is a co-founder of the company. He is an okay guy in person (the kind you wouldn't want to care about much) but things get tricky when he is your manager. In general I am all okay but there are times when I feel I am not being treated fairly: He doesn't give much thought to when he makes mistakes and when I do something similar, he is super critical. Recently he went as far as to say "I am not sure if I can trust you with this feature". The detais of this specific case are this: I was working on this feature, and I was already a couple of hours over my normal working hours, and then I decided to stop and continue tomorrow. We use git, and I like to commit changes locally and only push when I feel they are ready. This manager insists that I push all the changes to the central repo (in case my hard drive crashes). So I push the change, and the ticket is marked as "to be tested". Next day I come in, he sits next to me and starts complaining and says that I posted above. I really didn't know what to say, I tried to explain to him that the ticket is still being worked upon but he didn't seem to listen. He interrupts me in-between when I am coding, which I do not mind, but when I do that same, his face turns like this :| and reacts as if his work was super important and I am just wasting his time. He asks me to accumulate all questions, and then ask him altogether which is not always possible, as you need a clarification before you can continue on a feature implementation. And when I am coding, he talks on the phone with his customers next to me (when he can go to the meeting room with his laptop) and doesn't care. He made me switch to a whole new IDE (from Netbeans to a commercial IDE costing a lot of money) for a really tiny feature (which I later found out was in Netbeans as well!). I didn't make a big deal out of it as I am equally comfortable working with this new IDE, but I couldn't get the science behind his obsession. He said this feature makes sure that if any method is updated by a programmer, the IDE will turn the method name to red in places where it is used. I told him that I do not have a problem since I always search for method usage in the project and make sure its updated. IDEs even have refactoring features for exactly that, but... I recently implemented a feature for a project, and I was happy about it and considering him a senior, I asked him his comments about the implementation quality.. he thought long and hard, made a few funny faces, and when he couldn't find anything, he said "ummm, your program will crash if JS is disabled" - he was wrong, since I had made sure it would work fine with default values even if JS was disabled. I told him that and then he said "oh okay". BUT, the funny thing is, a few days back, he implemented something and I objected with "But that would not run if JS is disabled" and his response was "We don't have to care about people who disable JS" :-/ Once he asked me to investigate if there was a way to modify a CMS generated menu programmatically by extending the CMS, I did my research and told him that the only was is to inject a menu item using JavaScript / jQuery and his reaction was "ah that's ugly, and hacky, not acceptable" and two days later, I see that feature implemented in the same way as I had suggested. The point is, his reaction was not respectful at all, even if what I proposed was hacky, he should be respectful, that I know what's hacky and if I am suggesting something hacky, there must be a reason for it. There are plenty of other reasons / examples where I feel I am not being treated fairly. I want your advice as to what is it that I am doing wrong and how to deal with such a situation. The other guys in the team are actually very good people, and I do not want to leave the job either (although I could, if I want to). All I want is respect and equal treatment. I have thought about talking to this guy in a face to face meeting, but that worries me that his attitude might get worse and make things more difficult for me (since he doesn't seem to be the guy who thinks he can be wrong too). I am also considering talking to the other co-founder but I am not sure how he will take it (as both founders have been friends forever). Thanks for reading the long message, I really appreciate your help.

  Read the article

• Data management in unexpected places

  - by Ashok_Ora

  Normal 0 false false false EN-US X-NONE X-NONE Data management in unexpected places When you think of network switches, routers, firewall appliances, etc., it may not be obvious that at the heart of these kinds of solutions is an engine that can manage huge amounts of data at very high throughput with low latencies and high availability. Consider a network router that is processing tens (or hundreds) of thousands of network packets per second. So what really happens inside a router? Packets are streaming in at the rate of tens of thousands per second. Each packet has multiple attributes, for example, a destination, associated SLAs etc. For each packet, the router has to determine the address of the next “hop” to the destination; it has to determine how to prioritize this packet. If it’s a high priority packet, then it has to be sent on its way before lower priority packets. As a consequence of prioritizing high priority packets, lower priority data packets may need to be temporarily stored (held back), but addressed fairly. If there are security or privacy requirements associated with the data packet, those have to be enforced. You probably need to keep track of statistics related to the packets processed (someone’s sure to ask). You have to do all this (and more) while preserving high availability i.e. if one of the processors in the router goes down, you have to have a way to continue processing without interruption (the customer won’t be happy with a “choppy” VoIP conversation, right?). And all this has to be achieved without ANY intervention from a human operator – the router is most likely to be in a remote location – it must JUST CONTINUE TO WORK CORRECTLY, even when bad things happen. How is this implemented? As soon as a packet arrives, it is interpreted by the receiving software. The software decodes the packet headers in order to determine the destination, kind of packet (e.g. voice vs. data), SLAs associated with the “owner” of the packet etc. It looks up the internal database of “rules” of how to process this packet and handles the packet accordingly. The software might choose to hold on to the packet safely for some period of time, if it’s a low priority packet. Ah – this sounds very much like a database problem. For each packet, you have to minimally · Look up the most efficient next “hop” towards the destination. The “most efficient” next hop can change, depending on latency, availability etc. · Look up the SLA and determine the priority of this packet (e.g. voice calls get priority over data ftp) · Look up security information associated with this data packet. It may be necessary to retrieve the context for this network packet since a network packet is a small “slice” of a session. The context for the “header” packet needs to be stored in the router, in order to make this work. · If the priority of the packet is low, then “store” the packet temporarily in the router until it is time to forward the packet to the next hop. · Update various statistics about the packet. In most cases, you have to do all this in the context of a single transaction. For example, you want to look up the forwarding address and perform the “send” in a single transaction so that the forwarding address doesn’t change while you’re sending the packet. So, how do you do all this? Berkeley DB is a proven, reliable, high performance, highly available embeddable database, designed for exactly these kinds of usage scenarios. Berkeley DB is a robust, reliable, proven solution that is currently being used in these scenarios. First and foremost, Berkeley DB (or BDB for short) is very very fast. It can process tens or hundreds of thousands of transactions per second. It can be used as a pure in-memory database, or as a disk-persistent database. BDB provides high availability – if one board in the router fails, the system can automatically failover to another board – no manual intervention required. BDB is self-administering – there’s no need for manual intervention in order to maintain a BDB application. No need to send a technician to a remote site in the middle of nowhere on a freezing winter day to perform maintenance operations. BDB is used in over 200 million deployments worldwide for the past two decades for mission-critical applications such as the one described here. You have a choice of spending valuable resources to implement similar functionality, or, you could simply embed BDB in your application and off you go! I know what I’d do – choose BDB, so I can focus on my business problem. What will you do? /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

  Read the article

• Silverlight Cream Monday WP7 App Review # 2

  - by Dave Campbell

  Today's Review (alphabetic order): GooNews, Grocery Shopping List, Need for Speed, SurfCube, and United Nations News. I'm a day late if these are going to be 'Monday' posts, but there are lots of apps, lots of goodness, and lots of email, so I might try to do 2 a week, we'll see. So once again I've got a small review of 5 apps that are either on my phone or have been. Disclaimers at the end. In this Issue:   GooNews is a very cool app from Shawn Wildermuth (AgiliTrain). I don't know if he uses this as a demo during his instruction, but it definitely serves a purpose... wanna pick up the top news items from Google on a never-ending basis? ... this is it. You can add your own keyword searches, and send stories to InstaPaper or share via email. I like this because it brings me the news quickly and updated, and works great. GooNews is by AgiliTrain and is Free This was a request by the author, and actually surprised me. I'm a big one for lists, but I would have just done a OneNote list to SkyDrive and to my phone. This app is a lot more than that, but will take you some setup to make it be 'yours'. For obvious reasons, there are no unit prices on things, so you have to set that up to get some idea of the cost of what you're shopping for. But if you do that, you'll get a nice total. Lots of thought went into the various categories and you can add your own. There's a bit of animation on the category selection that's nice. He seems to have covered all the bases necessary to use this, even shopping 'plans' that can be saved, and emailing of lists. As I said, I'm more of a raw list person, but if you take the time to set this up, it should work very nicely for you. Grocery Shopping List is by Grocery Shopper and is $0.99 ($1.99 after Feb 1) with a free trial. This was my 2nd commercial game I bought, and the one I've played the most. I ran the trial, thought it worked great, and bought it. I've had a lot of fun with this... there's no gas pedal.. your foot is in the carbeurator from the GO!, and unless you wanna tap the screen and brake like a little girl, just hang onto the steering wheel (the phone), and guide your way through. Hours of fun and challenges here. I like this because it's got some challenge to it, and the cars seem to be very realistic in their reactions. Need for Speed Undercover is by Electronic Arts is $4.99 and has a free trial. SurfCube Browser is another app by the folks that did the GuitarTuner I reviewed on Monday. You have to see SurfCube to believe it. You've probably seen the YouTube video, if not check SilverlightCream number 1017. The app works very solid, and just as the video demonstrates. I downloaded and tried this, and it immediately did 2 things: bought it, and pinned it to my start page. I like this because it's fun to work with, and it works great as a browser. I'm about *this* close to replacing the IE tile on my front page with SurfCube. SurfCube Browser is by Kinabalu Innovation Limited and is $1.99 and has a free trial. Coming in with another News app is United Nations News by Justin Angel. This is definitely a news aggregator for 'grown ups'... news, photos, videos, and radio broadcsts from the international community all in one very slick app. This is an amazingly well thought-out and complete app. Even better yet, Justin has the code on CodePlex. A very well-done International news aggregator. United Nations News is by Justin Angel and is Free. A few disclaimers: Feel free to write me about your app and tell me about it. While it would be very cool to receive a whole bunch of xap files to review, at this point, for technical reasons, I'm unable to side-load my device. Since I plan on only doing this one day a week (twice if I find time), and only 5, I may never get caught up, so if you send me some info, be patient. Re: games ... remember I'm old... I'm from the era of Colossal Cave and Zork. Duke-Nukem 2D and Captain Comic were awesome. I don't own an XBOX or any other game system, so take game reviews from my perspective -- who knows, it may be refreshing :) I won't pay for an app or game just to try it. If you expect me to test-drive your app, it's going to have to have a Free Trial. I'm still playing with the format, comments are welcome. I decided I should alphabetize the list today... so there's no order implied Let me know what you think of the idea of doing reviews, or the layout/whatever, and Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Training a 'replacement', how to enforce standards?

  - by Mohgeroth

  Not sure that this is the right stack exchange site to ask this of, but here goes... Scope I work for a small company that employs a few hundred people. The development team for the company is small and works out of visual foxpro. A specific department in the company hired me in as a 'lone gunman' to fix and enhance a pre-existing invoicing system. I've successfully taken an Access application that suffered from a lot of risks and limitations and converted it into a C# application driven off of a SQL server backend. I have recently obtained my undergraduate and am no expert by any means. To help make up for that I've felt that earning microsoft certifications will force me to understand more about .net and how it functions. So, after giving my notice with 9 months in advance, 3 months ago a replacement finally showed up. Their role is to learn what I have been designing to an attempt to support the applications designed in C#. The Replacement Fresh out of college with no real-world work experience, the first instinct for anything involving data was and still is listboxes... any time data is mentioned the list box is the control of choice for the replacement. This has gotten to the point, no matter how many times I discuss other controls, where I've seen 5 listboxes on a single form. Classroom experience was almost all C++ console development. So, an example of where I have concern is in a winforms application: Users need to key Reasons into a table to select from later. Given that I know that a strongly typed data set exists, I can just drag the data source from the toolbox and it would create all of this for me. I realize this is a simple example but using databinding is the key. For the past few months now we have been talking about the strongly typed dataset, how to use it and where it interacts with other controls. Data sets, how they work in relation to binding sources, adapters and data grid views. After handing this project off I expected questions about how to implement these since for me this is the way to do it. What happened next simply floors me: An instance of an adapter from the strongly typed dataset was created in the activate event of the form, a table was created and filled with data. Then, a loop was made to manually add rows to a listbox from this table. Finally, a variable was kept to do lookups to figure out what ID the record was for updates if required. How do they modify records you ask? That was my first question too. You won't believe how simple it is, all you do it double click and they type into a pop-up prompt the new value to change it to. As a data entry operator, all the modal popups would drive me absolutely insane. The final solution exceeds 100 lines of code that must be maintained. So my concern is that none of this is sinking in... the department is only allowed 20 hours a week of their time. Up until last week, we've only been given 4-5 hours a week if I'm lucky. The past week or so, I've been lucky to get 10. Question WHAT DO I DO?! I have 4 weeks left until I leave and they fully 'support' this application. I love this job and the opportunity it has given me but it's time for me to spread my wings and find something new. I am in no way, shape or form convinced that they are ready to take over. I do feel that the replacement has the technical ability to 'figure it out' but instead of learning they just write code to do all of this stuff manually. If the replacement wants to code differently in the end, as long as it works I'm fine with that as horrifiying at it looks. However to support what I have designed they MUST to understand how it works and how I have used controls and the framework to make 'magic' happen. This project has about 40 forms, a database with over 30 some odd tables, triggers and stored procedures. It relates labor to invoices to contracts to projections... it's not as simple as it was three years ago when I began this project and the department is now in a position where they cannot survive without it. How in the world can I accomplish any of the following?: Enforce standards or understanding in constent design when the department manager keeps telling them they can do it however they want to Find a way to engage the replacement in active learning of the framework and system design that support must be given for Gracefully inform sr. management that 5-9 hours a week is simply not enough time to learn about the department, pre-existing processes, applications that need to be supported AND determine where potential enhancements to the system go... Yes I know this is a wall of text, thanks for reading through me but I simply don't know what I should be doing. For me, this job is a monster of a reference and things would look extremely bad if I left and things fell apart. How do I handle this?

  Read the article

• Educause Top-Ten IT Issues - the most change in a decade or more

  - by user739873

  The Education IT Issue Panel has released the 2012 top-ten issues facing higher education IT leadership, and instead of the customary reshuffling of the same deck, the issues reflect much of the tumult and dynamism facing higher education generally.  I find it interesting (and encouraging) that at the top of this year's list is "Updating IT Professionals' Skills and Roles to Accommodate Emerging Technologies and Changing IT Management and Service Delivery Models."  This reflects, in my view, the realization that higher education IT must change in order to fully realize the potential for transforming the institution, and therefore it's people must learn new skills, understand and accept new ways of solving problems, and not be tied down by past practices or institutional inertia. What follows in the remaining 9 top issues all speak, in some form or fashion, to the need for dramatic change, but not just in the areas of "funding IT" (code for cost containment or reduction), but rather the need to increase effectiveness and efficiency of the institution through the use of technology—leveraging the wave of BYOD (Bring Your Own Device) to the institution's advantage, rather than viewing it as a threat and a problem to be contained. Although it's #10 of 10, IT Governance (and establishment and implementation of the governance model throughout the institution) is key to effectively acting upon many of the preceding issues in this year's list.  In the majority of cases, technology exists to meet the needs and requirements to effectively address many of the challenges outlined in top-ten issues list. Which brings me to my next point. Although I try not to sound too much like an Oracle commercial in these (all too infrequent) blog posts, I can't help but point out how much confluence there is between several of the top issues this year and what my colleagues and I have been evangelizing for some time. Starting from the bottom of the list up: 1) I'm gratified that research and the IT challenges it presents has made the cut.  Big Data (or Large Data as it's phased in the report) is rapidly going to overwhelm much of what exists today even at our most prepared and well-equipped research universities.  Combine large data with the significantly more stringent requirements around data preservation, archiving, sharing, curation, etc. coming from granting agencies like NSF, and you have the brewing storm that could result in a lot of "one-off" solutions to a problem that could very well be addressed collectively and "at scale."   2) Transformative effects of IT – while I see more and more examples of this, there is still much more that can be achieved. My experience tells me that culture (as the report indicates or at least poses the question) gets in the way more than technology not being up to task.  We spend too much time on "context" and not "core," and get lost in the weeds on the journey to truly transforming the institution with technology. 3) Analytics as a key element in improving various institutional outcomes.  In our work around Student Success, we see predictive "academic" analytics as essential to getting in front of the Student Success issue, regardless of how an institution or collections of institutions defines success.  Analytics must be part of the fabric of the key academic enterprise applications, not a bolt-on.  We will spend a significant amount of time on this topic during our semi-annual Education Industry Strategy Council meeting in Washington, D.C. later this month. 4) Cloud strategy for the broad range of applications in the academic enterprise.  Some of the recent work by Casey Green at the Campus Computing Survey would seem to indicate that there is movement in this area but mostly in what has been termed "below the campus" application areas such as collaboration tools, recruiting, and alumni relations.  It's time to get serious about sourcing elements of mature applications like student information systems, HR, Finance, etc. leveraging a model other than traditional on-campus custom. I've only selected a few areas of the list to highlight, but the unifying theme here (and this is where I run the risk of sounding like an Oracle commercial) is that these lofty goals cry out for partners that can bring economies of scale to bear on the problems married with a deep understanding of the nuances unique to higher education.  In a recent piece in Educause Review on Student Information Systems, the author points out that "best of breed is back". Unfortunately I am compelled to point out that best of breed is a large part of the reason we have made as little progress as we have as an industry in advancing some of the causes outlined above.  Don't confuse "integrated" and "full stack" for vendor lock-in.  The best-of-breed market forces that Ron points to ensure that solutions have to be "integratable" or they don't survive in the marketplace. However, by leveraging the efficiencies afforded by adopting solutions that are pre-integrated (and possibly metered out as a service) allows us to shed unnecessary costs – as difficult as these decisions are to make and to drive throughout the organization. Cole

  Read the article

• What to do after a servicing fails on TFS 2010

  - by Martin Hinshelwood

  What do you do if you run a couple of hotfixes against your TFS 2010 server and you start to see seem odd behaviour? A customer of mine encountered that very problem, but they could not just, or at least not easily, go back a version.   You see, around the time of the TFS 2010 launch this company decided to upgrade their entire 250+ development team from TFS 2008 to TFS 2010. They encountered a few problems, owing mainly to the size of their TFS deployment, and the way they were using TFS. They were not doing anything wrong, but when you have the largest deployment of TFS outside of Microsoft you tend to run into problems that most people will never encounter. We are talking half a terabyte of source control in TFS with over 80 proxy servers. Its certainly the largest deployment I have ever heard of. When they did their upgrade way back in April, they found two major flaws in the product that meant that they had to back out of the upgrade and wait for a couple of hotfixes. KB983504 – Hotfix KB983578 – Patch KB2401992 -Hotfix In the time since they got the hotfixes they have run 6 successful trial migrations, but we are not talking minutes or hours here. When you have 400+ GB of data it takes time to copy it around. It takes time to do the upgrade and it takes time to do a backup. Well, last week it was crunch time with their developers off for Christmas they had a window of opportunity to complete the upgrade. Now these guys are good, but they wanted Northwest Cadence to be available “just in case”. They did not expect any problems as they already had 6 successful trial upgrades. The problems surfaced around 20 hours in after the first set of hotfixes had been applied. The new Team Project Collection, the only thing of importance, had disappeared from the Team Foundation Server Administration console. The collection would not reattach either. It would not even list the new collection as attachable! Figure: We know there is a database there, but it does not This was a dire situation as 20+ hours to repeat would leave the customer over time with 250+ developers sitting around doing nothing. We tried everything, and then we stumbled upon the command of last resort. TFSConfig Recover /ConfigurationDB:SQLServer\InstanceName;TFS_ConfigurationDBName /CollectionDB:SQLServer\instanceName;"Collection Name" -http://msdn.microsoft.com/en-us/library/ff407077.aspx WARNING: Never run this command! Now this command does something a little nasty. It assumes that there really should not be anything wrong and sets about fixing it. It ignores any servicing levels in the Team Project Collection database and forcibly applies the latest version of the schema. I am sure you can imagine the types of problems this may cause when the schema is updated leaving the data behind. That said, as far as we could see this collection looked good, and we were even able to find and attach the team project collection to the Configuration database. Figure: After attaching the TPC it enters a servicing mode After reattaching the team project collection we found the message “Re-Attaching”. Well, fair enough that sounds like something that may need to happen, and after checking that there was disk IO we left it to it. 14+ hours later, it was still not done so the customer raised a priority support call with MSFT and an engineer helped them out. Figure: Everything looks good, it is just offline. Tip: Did you know that these logs are not represented in the ~/Logs/* folder until they are opened once? The engineer dug around a bit and listened to our situation. He knew that we had run the dreaded “tfsconfig restore”, but was not phased. Figure: This message looks suspiciously like the wrong servicing version As it turns out, the servicing version was slightly out of sync with the schema. KB Schema Successful           KB983504 341 Yes   KB983578 344 sort of   KB2401992 360 nope   Figure: KB, Schema table with notation to its success The Schema version above represents the final end of run version for that hotfix or patch. The only way forward The problem was that the version was somewhere between 341 and 344. This is not a nice place to be in and the engineer give us the  only way forward as the removal of the servicing number from the database so that the re-attach process would apply the latest schema. if his sounds a little like the “tfsconfig recover” command then you are exactly right. Figure: Sneakily changing that 3 to a 1 should do the trick Figure: Changing the status and dropping the version should do it Now that we have done that we should be able to safely reattach and enable the Team Project Collection. Figure: The TPC is now all attached and running You may think that this is the end of the story, but it is not. After a while of mulling and seeking expert advice we came to the opinion that the database was, for want of a better term, “hosed”. There could well be orphaned data in there and the likelihood that we would have problems later down the line is pretty high. We contacted the customer back and made them aware that in all likelihood the repaired database was more like a “cut and shut” than anything else, and at the first sign of trouble later down the line was likely to split in two. So with 40+ hours invested in getting this new database ready the customer threw it away and started again. What would you do? Would you take the “cut and shut” to production and hope for the best?

  Read the article

• Exalogic 2.0.1 Tea Break Snippets - Modifying the Default Shipped Template

  - by The Old Toxophilist

  Having installed your Exalogic Virtual environment by default you have a single template which can be used to create your vServers. Although this template is suitable for creating simple test or development vServers it is recommended that you look at creating your own custom vServers that match the environment you wish to build and deploy. Therefore this Tea Time Snippet will take you through the simple process of modifying the standard template. Before You Start To edit the template you will need the Oracle ModifyJeos Utility which can be downloaded from the eDelivery Site. Once the ModifyJeos Utility has been downloaded we can install the rpms onto either an existing vServer or one of the Control vServers. rpm -ivh ovm-modify-jeos-1.0.1-10.el5.noarch.rpm rpm -ivh ovm-template-config-1.0.1-5.el5.noarch.rpm Alternatively you can install the modify jeos packages on a none Exalogic OEL installation or a VirtualBox image. If you are doing this, assuming OEL 5u8, you will need the following rpms. rpm -ivh ovm-modify-jeos-1.0.1-10.el5.noarch.rpm rpm -ivh ovm-el5u2-xvm-jeos-1.0.1-5.el5.i386.rpm rpm -ivh ovm-template-config-1.0.1-5.el5.noarch.rpm Base Template If you have installed the modify onto a vServer running on the Exalogic then simply mount the /export/common/images from the ZFS storage and you will be able to find the el_x2-2_base_linux_guest_vm_template_2.0.1.1.0_64.tgz (or similar depending which version you have) template file. Alternatively the latest can be downloaded from the eDelivery Site. Now we have the Template tgz we will need the extract it as follows: tar -zxvf  el_x2-2_base_linux_guest_vm_template_2.0.1.1.0_64.tgz This will create a directory called BASE which will contain the System.img (VServer image) and vm.cfg (VServer Config information). This directory should be renamed to something more meaning full that indicates what we have done to the template and then the Simple name / name in the vm.cfg editted for the same reason. Modifying the Template Resizing Root File System By default the shipped template has a root size of 4 GB which will leave a vServer created from it running at 90% full on the root disk. We can simply resize the template by executing the following: modifyjeos -f System.img -T <New Size MB>) For example to imcrease the default 4 GB to 40 GB we would execute: modifyjeos -f System.img -T 40960) Resizing Swap We can modify the size of the swap space within a template by executing the following: modifyjeos -f System.img -S <New Size MB>) For example to increase the swap from the default 512 MB to 4 GB we would execute: modifyjeos -f System.img -S 4096) Changing RPMs Adding RPMs To add RPMs using modifyjeos, complete the following steps: Add the names of the new RPMs in a list file, such as addrpms.lst. In this file, you should list each new RPM in a separate line. Ensure that all of the new RPMs are in a single directory, such as rpms. Run the following command to add the new RPMs: modifyjeos -f System.img -a <path_to_addrpms.lst> -m <path_to_rpms> -nogpg Where <path_to_addrpms.lst> is the path to the location of the addrpms.lst file, and <path_to_rpms> is the path to the directory that contains the RPMs. The -nogpg option eliminates signature check on the RPMs. Removing RPMs To remove RPM s using modifyjeos, complete the following steps: Add the names of the RPMs (the ones you want to remove) in a list file, such as removerpms.lst. In this file, you should list each RPM in a separate line. The Oracle Exalogic Elastic Cloud Administrator's Guide provides a list of all RPMs that must not be removed from the vServer. Run the following command to remove the RPMs: modifyjeos -f System.img -e <path_to_removerpms.lst> Where <path_to_removerpms.lst> is the path to the location of the removerpms.lst file. Mounting the System.img For all other modifications that are not supported by the modifyjeos command (adding you custom yum repositories, pre configuring NTP, modify default NFSv4 Nobody functionality, etc) we can mount the System.img and access it directly. To facititate quick and easy mounting/unmounting of the System.img I have put together the simple scripts below. MountSystemImg.sh #!/bin/sh # The script assumes it's being run from the directory containing the System.img # Export for later i.e. during unmount export LOOP=`losetup -f` export SYSTEMIMG=/mnt/elsystem # Make Temp Mount Directory mkdir -p $SYSTEMIMG # Create Loop for the System Image losetup $LOOP System.img kpartx -a $LOOP mount /dev/mapper/`basename $LOOP`p2 $SYSTEMIMG #Change Dir into mounted Image cd $SYSTEMIMG UnmountSystemImg.sh #!/bin/sh # The script assumes it's being run from the directory containing the System.img # Assume the $LOOP & $SYSTEMIMG exist from a previous run on the MountSystemImg.sh umount $SYSTEMIMG kpartx -d $LOOP losetup -d $LOOP Packaging the Template Once you have finished modifying the template it can be simply repackaged and then imported into EMOC as described in "Exalogic 2.0.1 Tea Break Snippets - Importing Public Server Template". To do this we will simply cd to the directory above that containing the modified files and execute the following: tar -zcvf <New Template Directory> <New Template Name>.tgz The resulting.tgz file can be copied to the images directory on the ZFS and uploadd using the IB network. This entry was originally posted on the The Old Toxophilist Site.

  Read the article

• CPU Usage in Very Large Coherence Clusters

  - by jpurdy

  When sizing Coherence installations, one of the complicating factors is that these installations (by their very nature) tend to be application-specific, with some being large, memory-intensive caches, with others acting as I/O-intensive transaction-processing platforms, and still others performing CPU-intensive calculations across the data grid. Regardless of the primary resource requirements, Coherence sizing calculations are inherently empirical, in that there are so many permutations that a simple spreadsheet approach to sizing is rarely optimal (though it can provide a good starting estimate). So we typically recommend measuring actual resource usage (primarily CPU cycles, network bandwidth and memory) at a given load, and then extrapolating from those measurements. Of course there may be multiple types of load, and these may have varying degrees of correlation -- for example, an increased request rate may drive up the number of objects "pinned" in memory at any point, but the increase may be less than linear if those objects are naturally shared by concurrent requests. But for most reasonably-designed applications, a linear resource model will be reasonably accurate for most levels of scale. However, at extreme scale, sizing becomes a bit more complicated as certain cluster management operations -- while very infrequent -- become increasingly critical. This is because certain operations do not naturally tend to scale out. In a small cluster, sizing is primarily driven by the request rate, required cache size, or other application-driven metrics. In larger clusters (e.g. those with hundreds of cluster members), certain infrastructure tasks become intensive, in particular those related to members joining and leaving the cluster, such as introducing new cluster members to the rest of the cluster, or publishing the location of partitions during rebalancing. These tasks have a strong tendency to require all updates to be routed via a single member for the sake of cluster stability and data integrity. Fortunately that member is dynamically assigned in Coherence, so it is not a single point of failure, but it may still become a single point of bottleneck (until the cluster finishes its reconfiguration, at which point this member will have a similar load to the rest of the members). The most common cause of scaling issues in large clusters is disabling multicast (by configuring well-known addresses, aka WKA). This obviously impacts network usage, but it also has a large impact on CPU usage, primarily since the senior member must directly communicate certain messages with every other cluster member, and this communication requires significant CPU time. In particular, the need to notify the rest of the cluster about membership changes and corresponding partition reassignments adds stress to the senior member. Given that portions of the network stack may tend to be single-threaded (both in Coherence and the underlying OS), this may be even more problematic on servers with poor single-threaded performance. As a result of this, some extremely large clusters may be configured with a smaller number of partitions than ideal. This results in the size of each partition being increased. When a cache server fails, the other servers will use their fractional backups to recover the state of that server (and take over responsibility for their backed-up portion of that state). The finest granularity of this recovery is a single partition, and the single service thread can not accept new requests during this recovery. Ordinarily, recovery is practically instantaneous (it is roughly equivalent to the time required to iterate over a set of backup backing map entries and move them to the primary backing map in the same JVM). But certain factors can increase this duration drastically (to several seconds): large partitions, sufficiently slow single-threaded CPU performance, many or expensive indexes to rebuild, etc. The solution of course is to mitigate each of those factors but in many cases this may be challenging. Larger clusters also lead to the temptation to place more load on the available hardware resources, spreading CPU resources thin. As an example, while we've long been aware of how garbage collection can cause significant pauses, it usually isn't viewed as a major consumer of CPU (in terms of overall system throughput). Typically, the use of a concurrent collector allows greater responsiveness by minimizing pause times, at the cost of reducing system throughput. However, at a recent engagement, we were forced to turn off the concurrent collector and use a traditional parallel "stop the world" collector to reduce CPU usage to an acceptable level. In summary, there are some less obvious factors that may result in excessive CPU consumption in a larger cluster, so it is even more critical to test at full scale, even though allocating sufficient hardware may often be much more difficult for these large clusters.

  Read the article

• Updates broke my themes/shell [Ubuntu 12.04 running Gnome 3 ]

  - by APNW

  I am running gnome-session 3.4.2.1. After the latest updates (listed below) my theme regressed to what looks like tango - not sure. Am unable to change it using Gnome-tweak tool or the display settings. I am also unable to change the wallpaper. Here's what it looks like: Synaptic: Chromium and this is the wallpaper page even though I have selected the wallpaper, it actually does not change. This same problem occurred on my personal computer, and one other computer I have, all running the same software/config. The interesting thing is that while Gnome 3 and Unity are affected, Cinnamon is not. What I've done so far: purged and re-installed both gnome 3 and Unity- no change noted. So, how do I fix this? Thanks Here's the installation log: Start-Date: 2013-11-07 12:01:28 Upgrade: chromium-browser-l10n:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), libswscale2:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), chromium-codecs-ffmpeg:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), chromium-browser:i386 (28.0.1500.71-0ubuntu1.12.04.1, 30.0.1599.114-0ubuntu0.12.04.3), libpostproc52:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), libavcodec-extra-53:i386 (0.8.6ubuntu0.12.04.1, 0.8.8ubuntu0.12.04.1), libavformat53:i386 (0.8.6-0ubuntu0.12.04.1, 0.8.8-0ubuntu0.12.04.1), libavutil-extra-51:i386 (0.8.6ubuntu0.12.04.1, 0.8.8ubuntu0.12.04.1) End-Date: 2013-11-07 12:02:00 Start-Date: 2013-11-07 17:32:55 Commandline: aptdaemon role='role-commit-packages' sender=':1.136' Install: libmusicbrainz5-0:i386 (5.0.1-2~precise2), udisks2:i386 (1.98.0-1~precise1), libclutter-gst-1.0-0:i386 (1.5.4-0ubuntu2), libudisks2-0:i386 (1.98.0-1~precise1), cinnamon-session-common:i386 (2.0.4-20131105043005-precise), librhythmbox-core6:i386 (2.97-1ubuntu1~precise1), gcr:i386 (3.4.1-3~precise1), libcluttergesture-0.0.2-0:i386 (0.0.2.1-2ubuntu3), libmx-1.0-2:i386 (1.4.3-0ubuntu1), guile-2.0-libs:i386 (2.0.5+1-1), libclutter-imcontext-0.1-0:i386 (0.1.4-2build1), libnatpmp1:i386 (20110808-3ubuntu1) Upgrade: gnome-keyring:i386 (3.2.2-2ubuntu4.1, 3.4.1-4ubuntu1~precise1), cinnamon:i386 (2.0.6-20131026040307-precise, 2.0.10-20131105040309-precise), gir1.2-muffin-3.0:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), gir1.2-totem-1.0:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), nemo:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), aisleriot:i386 (3.2.3.2-0ubuntu1, 3.4.1-1~precise1), procps:i386 (3.2.8-11ubuntu6.2, 3.2.8-11ubuntu6.3), libcinnamon-desktop0:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), libgck-1-0:i386 (3.2.2-2ubuntu4.1, 3.4.1-3~precise1), totem-plugins:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), cinnamon-desktop-data:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), rhythmbox:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), libgcr-3-1:i386 (3.2.2-2ubuntu4.1, 3.4.1-3~precise1), seahorse:i386 (3.2.2-0ubuntu2.1, 3.4.1-2~precise1), muffin-common:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), totem-common:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), libtotem0:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), rhythmbox-data:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), gir1.2-cinnamondesktop-3.0:i386 (2.0.2-20131025011504-precise, 2.0.3-20131105011505-precise), cinnamon-session:i386 (2.0.1-20131021043004-precise, 2.0.4-20131105043005-precise), rhythmbox-mozilla:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), rhythmbox-plugin-zeitgeist:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), libmuffin0:i386 (2.0.3-20131023003029-precise, 2.0.3-20131105003012-precise), cjs:i386 (2.0.0-20131021020602-precise, 2.0.0-20131105020703-precise), rhythmbox-plugin-cdrecorder:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), cinnamon-common:i386 (2.0.6-20131026040307-precise, 2.0.10-20131105040309-precise), gnome-disk-utility:i386 (3.0.2-2ubuntu7, 3.4.1-0ubuntu1~precise1), nemo-fileroller:i386 (2.0.0-20131021020004-precise, 2.0.0-20131105020003-precise), libnemo-extension1:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), rhythmbox-plugins:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), gimp:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), cinnamon-settings-daemon:i386 (2.0.5-20131026004504-precise, 2.0.6-20131105004505-precise), libgimp2.0:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), gir1.2-rb-3.0:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), wpasupplicant:i386 (0.7.3-6ubuntu2.1, 0.7.3-6ubuntu2.2), libcjs0c:i386 (2.0.0-20131021020602-precise, 2.0.0-20131105020703-precise), nemo-data:i386 (2.0.2-20131023010018-precise, 2.0.5-20131105010007-precise), totem:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), gimp-data:i386 (2.8.6-0precise1~ppa, 2.8.8-0precise0~ppa), transmission-common:i386 (2.51-0ubuntu1.3, 2.73-0ubuntu1~precise1), cinnamon-translations:i386 (2.0.1-20131021040407-precise, 2.0.1-20131105040807-precise), totem-mozilla:i386 (3.0.1-0ubuntu21.1, 3.4.3-0ubuntu1~precise1), rhythmbox-plugin-magnatune:i386 (2.96-0ubuntu4.3, 2.97-1ubuntu1~precise1), transmission-gtk:i386 (2.51-0ubuntu1.3, 2.73-0ubuntu1~precise1) End-Date: 2013-11-07 17:34:40

  Read the article

• ROracle support for TimesTen In-Memory Database

  - by Sherry LaMonica

  Today's guest post comes from Jason Feldhaus, a Consulting Member of Technical Staff in the TimesTen Database organization at Oracle.  He shares with us a sample session using ROracle with the TimesTen In-Memory database.  Beginning in version 1.1-4, ROracle includes support for the Oracle Times Ten In-Memory Database, version 11.2.2. TimesTen is a relational database providing very fast and high throughput through its memory-centric architecture.  TimesTen is designed for low latency, high-volume data, and event and transaction management. A TimesTen database resides entirely in memory, so no disk I/O is required for transactions and query operations. TimesTen is used in applications requiring very fast and predictable response time, such as real-time financial services trading applications and large web applications. TimesTen can be used as the database of record or as a relational cache database to Oracle Database. ROracle provides an interface between R and the database, providing the rich functionality of the R statistical programming environment using the SQL query language. ROracle uses the OCI libraries to handle database connections, providing much better performance than standard ODBC.The latest ROracle enhancements include: Support for Oracle TimesTen In-Memory Database Support for Date-Time using R's POSIXct/POSIXlt data types RAW, BLOB and BFILE data type support Option to specify number of rows per fetch operation Option to prefetch LOB data Break support using Ctrl-C Statement caching support Times Ten 11.2.2 contains enhanced support for analytics workloads and complex queries: Analytic functions: AVG, SUM, COUNT, MAX, MIN, DENSE_RANK, RANK, ROW_NUMBER, FIRST_VALUE and LAST_VALUE Analytic clauses: OVER PARTITION BY and OVER ORDER BY Multidimensional grouping operators: Grouping clauses: GROUP BY CUBE, GROUP BY ROLLUP, GROUP BY GROUPING SETS Grouping functions: GROUP, GROUPING_ID, GROUP_ID WITH clause, which allows repeated references to a named subquery block Aggregate expressions over DISTINCT expressions General expressions that return a character string in the source or a pattern within the LIKE predicate Ability to order nulls first or last in a sort result (NULLS FIRST or NULLS LAST in the ORDER BY clause) Note: Some functionality is only available with Oracle Exalytics, refer to the TimesTen product licensing document for details. Connecting to TimesTen is easy with ROracle. Simply install and load the ROracle package and load the driver. > install.packages("ROracle") > library(ROracle) Loading required package: DBI > drv <- dbDriver("Oracle") Once the ROracle package is installed, create a database connection object and connect to a TimesTen direct driver DSN as the OS user. > conn <- dbConnect(drv, username ="", password="", dbname = "localhost/SampleDb_1122:timesten_direct") You have the option to report the server type - Oracle or TimesTen? > print (paste ("Server type =", dbGetInfo (conn)$serverType)) [1] "Server type = TimesTen IMDB" To create tables in the database using R data frame objects, use the function dbWriteTable. In the following example we write the built-in iris data frame to TimesTen. The iris data set is a small example data set containing 150 rows and 5 columns. We include it here not to highlight performance, but so users can easily run this example in their R session. > dbWriteTable (conn, "IRIS", iris, overwrite=TRUE, ora.number=FALSE) [1] TRUE Verify that the newly created IRIS table is available in the database. To list the available tables and table columns in the database, use dbListTables and dbListFields, respectively. > dbListTables (conn) [1] "IRIS" > dbListFields (conn, "IRIS") [1] "SEPAL.LENGTH" "SEPAL.WIDTH" "PETAL.LENGTH" "PETAL.WIDTH" "SPECIES" To retrieve a summary of the data from the database we need to save the results to a local object. The following call saves the results of the query as a local R object, iris.summary. The ROracle function dbGetQuery is used to execute an arbitrary SQL statement against the database. When connected to TimesTen, the SQL statement is processed completely within main memory for the fastest response time. > iris.summary <- dbGetQuery(conn, 'SELECT SPECIES, AVG ("SEPAL.LENGTH") AS AVG_SLENGTH, AVG ("SEPAL.WIDTH") AS AVG_SWIDTH, AVG ("PETAL.LENGTH") AS AVG_PLENGTH, AVG ("PETAL.WIDTH") AS AVG_PWIDTH FROM IRIS GROUP BY ROLLUP (SPECIES)') > iris.summary SPECIES AVG_SLENGTH AVG_SWIDTH AVG_PLENGTH AVG_PWIDTH 1 setosa 5.006000 3.428000 1.462 0.246000 2 versicolor 5.936000 2.770000 4.260 1.326000 3 virginica 6.588000 2.974000 5.552 2.026000 4 <NA> 5.843333 3.057333 3.758 1.199333 Finally, disconnect from the TimesTen Database. > dbCommit (conn) [1] TRUE > dbDisconnect (conn) [1] TRUE We encourage you download Oracle software for evaluation from the Oracle Technology Network. See these links for our software: Times Ten In-Memory Database,  ROracle.  As always, we welcome comments and questions on the TimesTen and  Oracle R technical forums.

  Read the article

• Provocative Tweets From the Dachis Social Business Summit

  - by Mike Stiles

  On June 20, all who follow social business and how social is changing how we do business and internal business structures, gathered in London for the Dachis Social Business Summit. In addition to Oracle SVP Product Development, Reggie Bradford, brands and thought leaders posed some thought-provoking ideas and figures. Here are some of the most oft-tweeted points, and our thoughts that they provoked. Tweet: The winners will be those who use data to improve performance.Thought: Everyone is dwelling on ROI. Why isn’t everyone dwelling on the opportunity to make their product or service better (as if that doesn’t have an effect on ROI)? Big data can improve you…let it. Tweet: High performance hinges on integrated teams that interact with each other.Thought: Team members may work well with each other, but does the team as a whole “get” what other teams are doing? That’s the key to an integrated, companywide workforce. (Internal social platforms can facilitate that by the way). Tweet: Performance improvements come from making the invisible visible.Thought: Many of the factors that drive customer behavior and decisions are invisible. Through social, customers are now showing us what we couldn’t see before…if we’re paying attention. Tweet: Games have continuous feedback, which is why they’re so engaging.  Apply that to business operations.Thought: You think your employees have an obligation to be 100% passionate and engaged at all times about making you richer. Think again. Like customers, they must be motivated. Visible insight that they’re advancing on their goals helps. Tweet: Who can add value to the data?  Data will tend to migrate to where it will be most effective.Thought: Not everybody needs all the data. One team will be able to make sense of, use, and add value to data that may be irrelevant to another team. Like a strategized football play, the data has to get sent to the spot on the field where it’s needed most. Tweet: The sale isn’t the light at the end of the tunnel, it’s the start of a new marketing cycle.Thought: Another reason the ROI question is fundamentally flawed. The sale is not the end of the potential return on investment. After-the-sale service and nurturing begins where the sales “victory” ends. Tweet: A dead sale is one that’s not shared.  People must be incentivized to share.Thought: Guess what, customers now know their value to you as marketers on your behalf. They’ll tell people about your product, but you’ve got to answer, “Why should I?” And you’ve got to answer it with something substantial, not lame trinkets. Tweet: Social user motivations are competition, affection, excellence and curiosity.Thought: Your followers will engage IF; they can get something for doing it, love your culture so much they want you to win, are consistently stunned at the perfection and coolness of your products, or have been stimulated enough to want to know more. Tweet: In Europe, 92% surveyed said they couldn’t care less about brands.Thought: Oh well, so much for loving you or being impressed enough with your products & service that they want you to win. We’ve got a long way to go. Tweet: A complaint is a gift.Thought: Our instinct where complaints are concerned is to a) not listen, b) dismiss the one who complains as a kook, c) make excuses, and d) reassure ourselves with internal group-think that they’re wrong and we’re right. It’s the perfect recipe for how to never, ever grow or get better. In a way, this customer cares more than you do. Tweet: 78% of consumers think peer recommendation is the best form of advertising.  Eventually, engagement is going to eat advertising.Thought: Why is peer recommendation best? Trust. If a friend tells me how great a movie was, I believe him. He has credibility with me. He’s seen it, and he could care less if I buy a ticket. He’s telling me it was awesome because he sincerely believes that it was.  That’s gold. Tweet: 86% of customers are willing to pay more for a better customer experience. Thought: This “how mad can we make our customers without losing them” strategy has to end. The customer experience has actual monetary value, money you’re probably leaving on the table. @mikestilesPhoto: stock.xchng

  Read the article

• Sass interface in HTML6 for upload files.

  - by Anirudha

  Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/11/04/sass-interface-in-html6-for-upload-files.aspx[This post is about experiment & imagination] From Windows XP (ever last OS I tried) I have seen a feature that is about send file to pen drive and make shortcut on Desktop. In XP, Win7 (Win8 have this too, not removed) just select the file right click > send to and you can send this file to many places. In my menu it’s show me Skype because I have installed it. this skype confirm that we can add our own app here to make it more easy for user to send file in our app. Nowadays Many people use Cloud or online site to store the file. In case of html5 drag and drop you need to have site opened and have opened that page which is about file upload. You need to select all  and drag and drop. after drag and drop file is simply uploaded to server and site show you on list (if no error happen). but this file upload is seriously not worthy since I have to open the site when I do this operation.   Through this post I want to describe a feature that can make this thing better.  This API is simply called SASS FILE UPLOAD API Through This API when you surf the site and come into file upload page then the page will tell you that we also have SASS FILE API support. Enable it for better result.   How this work This API feature are activated on 2 basis. 1. Feature are disabled by default on site (or you can change it if it’s not) 2. This API allow specific site to upload the files. Files upload may have some rule. For example (minimum or maximum size of file to uploaded, which format the site allowed you to upload). In case of resume site you will be allowed to use .doc (according to code of site)   How browser recognize that Site have SASS service. In HTML source of  the site, the code have a meta tag similar to this <meta name=”sass-upload-api” path=”/upload.json”/> Remember that upload.json is one file that has define the value of many settings {   "cookie_name": "ck_file",   "maximum_allowed_perday": 24,   "allowed_file_extensions","*.png,*.jpg,*.jpeg,*.gif",   "method": [       {           "get": "file/get",           "routing":"/file/get/{fileName}"       },       {           "post": "file/post",           "routing":"/file/post/{fileName}"       },       {           "delete": "file/delete",           "routing":"/file/delete/{fileName}"       },         {           "put": "file/put",           "routing":"/file/put/{fileName}"       },        {           "all": "file/all",           "routing":"/file/all/{fileName}"       }    ] } cookie name is simply a cookie which should be stored in browser and define in json. we define the cookie_name so we can easily share then with service in Windows system. This cookie will be accessible with the service so it’s security based safe. other cookie will not be shared.   The cookie will be post,put, get from this location. The all location will be simply about showing a whole list of file. This will gave a treeview kind of json to show the directories on sever.   for example example.com if you have activated the API with this site then you will seen a send to option in your explorer.exe when you send you will got a windows open which folder you want to use to send the file. The windows will also describe the limit and how much you can upload. This thing never required site to opened. When you upload the file this will be uploaded through FTP protocol. FTP protocol are better for performance.   How this API make thing faster. Suppose you want to ask a question and want to post image. you just do it and get it ready when you open stackoverflow.com now stackoverflow will only tell you which file you want to put on your current question that you asking for. second use is about people use cloud app.   There is no need of drag and drop anymore. we just need to do it without drag and drop it. we doesn’t need to open the site either. This thing is still in experiment level. I will update this post when I got some progress on this API.

  Read the article

• What Counts For a DBA: Fitness

  - by Louis Davidson

  If you know me, you can probably guess that physical exercise is not really my thing. There was a time in my past when it a larger part of my life, but even then never in the same sort of passionate way as a number of our SQL friends.  For me, I find that mental exercise satisfies what I believe to be the same inner need that drives people to run farther than I like to drive on most Saturday mornings, and it is certainly just as addictive. Mental fitness shares many common traits with physical fitness, especially the need to attain it through repetitive training. I only wish that mental training burned off a bacon cheeseburger in the same manner as does jogging around a dewy park on Saturday morning. In physical training, there are at least two goals, the first of which is to be physically able to do a task. The second is to train the brain to perform the task without thinking too hard about it. No matter how long it has been since you last rode a bike, you will be almost certainly be able to hop on and start riding without thinking about the process of pedaling or balancing. If you’ve never ridden a bike, you could be a physics professor /Olympic athlete and still crash the first few times you try, even though you are as strong as an ox and your knowledge of the physics of bicycle riding makes the concept child’s play. For programming tasks, the process is very similar. As a DBA, you will come to know intuitively how to backup, optimize, and secure database systems. As a data programmer, you will work to instinctively use the clauses of Transact-SQL DML so that, when you need to group data three ways (and not four), you will know to use the GROUP BY clause with GROUPING SETS without resorting to a search engine.  You have the skill. Making it naturally then requires repetition and experience is the primary requirement, not just simply learning about a topic. The hardest part of being really good at something is this difference between knowledge and skill. I have recently taken several informative training classes with Kimball University on data warehousing and ETL. Now I have a lot more knowledge about designing data warehouses than before. I have also done a good bit of data warehouse designing of late and have started to improve to some level of proficiency with the theory. Yet, for all of this head knowledge, it is still a struggle to take what I have learned and apply it to the designs I am working on.  Data warehousing is still a task that is not yet deeply ingrained in my brain muscle memory. On the other hand, relational database design is something that no matter how much or how little I may get to do it, I am comfortable doing it. I have done it as a profession now for well over a decade, I teach classes on it, and I also have done (and continue to do) a lot of mental training beyond the work day. Sometimes the training is just basic education, some reading blogs and attending sessions at PASS events.  My best training comes from spending time working on other people’s design issues in forums (though not nearly as much as I would like to lately). Working through other people’s problems is a great way to exercise your brain on problems with which you’re not immediately familiar. The final bit of exercise I find useful for cultivating mental fitness for a data professional is also probably the nerdiest thing that I will ever suggest you do.  Akin to running in place, the idea is to work through designs in your head. I have designed more than one database system that would revolutionize grocery store operations, sales at my local Target store, the ordering process at Amazon, and ways to improve Disney World operations to get me through a line faster (some of which they are starting to implement without any of my help.) Never are the designs truly fleshed out, but enough to work through structures and processes.  On “paper”, I have designed database systems to catalog things as trivial as my Lego creations, rental car companies and my audio and video collections. Once I get the database designed mentally, sometimes I will create the database, add some data (often using Red-Gate’s Data Generator), and write a few queries to see if a concept was realistic, but I will rarely fully flesh out the database since I have no desire to do any user interface programming anymore.  The mental training allows me to keep in practice for when the time comes to do the work I love the most for real…even if I have been spending most of my work time lately building data warehouses.  If you are really strong of mind and body, perhaps you can mix a mental run with a physical run; though don’t run off of a cliff while contemplating how you might design a database to catalog the trees on a mountain…that would be contradictory to the purpose of both types of exercise.

  Read the article

• Finding it Hard to Deliver Right Customer Experience: Think BPM!

  - by Ajay Khanna

  Our relationship with our customers is not a just a single interaction and we should not treat it like one. A customer’s relationship with a vendor is like a journey which starts way before customer makes a purchase and lasts long after that. The journey may start with customer researching a product that may lead to the eventual purchase and may continue with support or service needs for the product. A typical customer journey can be represented as shown below: As you may notice, customers tend to use multiple channels to interact with a company throughout their journey.  They also expect that they should get consistent experience, no matter what interaction channel they may choose. Customers do not like to repeat the information they have already provided and expect companies to remember their preferences, and offer them relevant products and services. If the company fails to meet this expectation, customers not only will abandon the purchase and go to the competitor but may also influence others’ purchase decision. Gone are the days when word of mouth was the only medium, and the customer could influence “Six” others. This is the age of social media and customer’s good or bad experience, especially bad get highly amplified and may influence hundreds of others. Challenges that face B2C companies today include: Delivering consistent experience: The reason that delivering consistent experience is challenging is due to fragmented data, disjointed systems and siloed multichannel interactions. Customers tend to get different service quality if they use web vs. phone vs. store. They get different responses from different service agents or get inconsistent answers if they call sales vs. service group in the company. Such inconsistent experiences result in lower customer satisfaction or NPS (net promoter score) numbers. Increasing Revenue: To stay competitive companies frequently introduce new products and services. Delay in launching such offerings has a significant impact on revenue realization. In addition to new product revenue, there are multiple opportunities to up-sell and cross-sell that impact bottom line. If companies are not able to identify such opportunities, bring a product to market quickly, or not offer the right product to the right customer at the right time, significant loss of revenue may occur. Ensuring Compliance: Companies must be compliant to ever changing regulations, these could be about Know Your Customer (KYC), Export/Import regulations, or taxation policies. In addition to government agencies, companies also need to comply with the SLA that they have committed to their customers. Lapse in meeting any of these requirements may lead to serious fines, penalties and loss in business. Companies have to make sure that they are in compliance will all such regulations and SLA commitments, at any given time. With the advent of social networks and mobile technology, companies not only need to focus on process efficiency but also on customer engagement. Improving engagement means delivering the customer experience as the customer is expecting and interacting with the customer at right time using right channel. Customers expect to be able to contact you via any channel of their choice (web, email, chat, mobile, social media), purchase via any viable channel (web, phone, store, mobile). Customers expect companies to understand their particular needs and remember their preferences on repeated visits. To deliver such an integrated, consistent, and contextual experience, power of BPM in must. Your company may be organized in departments like Marketing, Sales, Service. You may hold prospect data in SFA, order information in ERP, customer issues in CRM. However, the experience delivered to the customer must not be constrained by your system legacy. BPM helps in designing the right experience for the right customer and integrates all the underlining channels, systems, applications to make sure right information will be delivered to the right knowledge worker or to the customer every single time.     Orchestrating information across all systems (MDM, CRM, ERP), departments (commerce, merchandising, marketing service) and channels (Email, phone, web, social)  is the key, and that’s what BPM delivers. In addition to orchestrating systems and channels for consistency, BPM also provides an ability for analysis and decision management. By using data from historical transactions, social media and from other systems, users can determine the customer preferences, customer value, and churn propensity. This information, in the context, is then used while making a decision at a process step. Working with real-time decision management system can also suggest right up-sell or cross-sell offers, discounts or next-best-action steps for a particular customer. Timely action on customer issues or request is also a key tenet of a good customer experience. BPM’s complex event processing capabilities help companies to take proactive actions before issues get escalated. BPM system can be designed to listen to a certain event patters then deduce from those customer situations (credit card stolen, baggage lost, change of address) and do a triage before situation goes out of control. If such a situation arises you can send alerts to right people or immediately invoke corrective actions. Last but not least one of BPM’s key values is to drive continuous improvement. Learning about customers past experiences, interactions and social conversations, provide valuable insight. Such insight can be used to improve products, customer facing processes, and customer experience. You may take these insights as an input to design better more efficient and customer friendly sales, contact center or self-service processes. If customer experience is important for your business, make sure you have incorporated BPM as a part of your strategy to design, orchestrate and improve your customer facing processes.

  Read the article

• SQL SERVER – Backing Up and Recovering the Tail End of a Transaction Log – Notes from the Field #042

  - by Pinal Dave

  [Notes from Pinal]: The biggest challenge which people face is not taking backup, but the biggest challenge is to restore a backup successfully. I have seen so many different examples where users have failed to restore their database because they made some mistake while they take backup and were not aware of the same. Tail Log backup was such an issue in earlier version of SQL Server but in the latest version of SQL Server, Microsoft team has fixed the confusion with additional information on the backup and restore screen itself. Now they have additional information, there are a few more people confused as they have no clue about this. Previously they did not find this as a issue and now they are finding tail log as a new learning. Linchpin People are database coaches and wellness experts for a data driven world. In this 42nd episode of the Notes from the Fields series database expert Tim Radney (partner at Linchpin People) explains in a very simple words, Backing Up and Recovering the Tail End of a Transaction Log. Many times when restoring a database over an existing database SQL Server will warn you about needing to make a tail end of the log backup. This might be your reminder that you have to choose to overwrite the database or could be your reminder that you are about to write over and lose any transactions since the last transaction log backup. You might be asking yourself “What is the tail end of the transaction log”. The tail end of the transaction log is simply any committed transactions that have occurred since the last transaction log backup. This is a very crucial part of a recovery strategy if you are lucky enough to be able to capture this part of the log. Most organizations have chosen to accept some amount of data loss. You might be shaking your head at this statement however if your organization is taking transaction logs backup every 15 minutes, then your potential risk of data loss is up to 15 minutes. Depending on the extent of the issue causing you to have to perform a restore, you may or may not have access to the transaction log (LDF) to be able to back up those vital transactions. For example, if the storage array or disk that holds your transaction log file becomes corrupt or damaged then you wouldn’t be able to recover the tail end of the log. If you do have access to the physical log file then you can still back up the tail end of the log. In 2013 I presented a session at the PASS Summit called “The Ultimate Tail Log Backup and Restore” and have been invited back this year to present it again. During this session I demonstrate how you can back up the tail end of the log even after the data file becomes corrupt. In my demonstration I set my database offline and then delete the data file (MDF). The database can’t become more corrupt than that. I attempt to bring the database back online to change the state to RECOVERY PENDING and then backup the tail end of the log. I can do this by specifying WITH NO_TRUNCATE. Using NO_TRUNCATE is equivalent to specifying both COPY_ONLY and CONTINUE_AFTER_ERROR. It as its name says, does not try to truncate the log. This is a great demo however how could I achieve backing up the tail end of the log if the failure destroys my entire instance of SQL and all I had was the LDF file? During my demonstration I also demonstrate that I can attach the log file to a database on another instance and then back up the tail end of the log. If I am performing proper backups then my most recent full, differential and log files should be on a server other than the one that crashed. I am able to achieve this task by creating new database with the same name as the failed database. I then set the database offline, delete my data file and overwrite the log with my good log file. I attempt to bring the database back online and then backup the log with NO_TRUNCATE just like in the first example. I encourage each of you to view my blog post and watch the video demonstration on how to perform these tasks. I really hope that none of you ever have to perform this in production, however it is a really good idea to know how to do this just in case. It really isn’t a matter of “IF” you will have to perform a restore of a production system but more of a “WHEN”. Being able to recover the tail end of the log in these sever cases could be the difference of having to notify all your business customers of data loss or not. If you want me to take a look at your server and its settings, or if your server is facing any issue we can Fix Your SQL Server. Note: Tim has also written an excellent book on SQL Backup and Recovery, a must have for everyone. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Performance triage

  - by Dave

  Folks often ask me how to approach a suspected performance issue. My personal strategy is informed by the fact that I work on concurrency issues. (When you have a hammer everything looks like a nail, but I'll try to keep this general). A good starting point is to ask yourself if the observed performance matches your expectations. Expectations might be derived from known system performance limits, prototypes, and other software or environments that are comparable to your particular system-under-test. Some simple comparisons and microbenchmarks can be useful at this stage. It's also useful to write some very simple programs to validate some of the reported or expected system limits. Can that disk controller really tolerate and sustain 500 reads per second? To reduce the number of confounding factors it's better to try to answer that question with a very simple targeted program. And finally, nothing beats having familiarity with the technologies that underlying your particular layer. On the topic of confounding factors, as our technology stacks become deeper and less transparent, we often find our own technology working against us in some unexpected way to choke performance rather than simply running into some fundamental system limit. A good example is the warm-up time needed by just-in-time compilers in Java Virtual Machines. I won't delve too far into that particular hole except to say that it's rare to find good benchmarks and methodology for java code. Another example is power management on x86. Power management is great, but it can take a while for the CPUs to throttle up from low(er) frequencies to full throttle. And while I love "turbo" mode, it makes benchmarking applications with multiple threads a chore as you have to remember to turn it off and then back on otherwise short single-threaded runs may look abnormally fast compared to runs with higher thread counts. In general for performance characterization I disable turbo mode and fix the power governor at "performance" state. Another source of complexity is the scheduler, which I've discussed in prior blog entries. Lets say I have a running application and I want to better understand its behavior and performance. We'll presume it's warmed up, is under load, and is an execution mode representative of what we think the norm would be. It should be in steady-state, if a steady-state mode even exists. On Solaris the very first thing I'll do is take a set of "pstack" samples. Pstack briefly stops the process and walks each of the stacks, reporting symbolic information (if available) for each frame. For Java, pstack has been augmented to understand java frames, and even report inlining. A few pstack samples can provide powerful insight into what's actually going on inside the program. You'll be able to see calling patterns, which threads are blocked on what system calls or synchronization constructs, memory allocation, etc. If your code is CPU-bound then you'll get a good sense where the cycles are being spent. (I should caution that normal C/C++ inlining can diffuse an otherwise "hot" method into other methods. This is a rare instance where pstack sampling might not immediately point to the key problem). At this point you'll need to reconcile what you're seeing with pstack and your mental model of what you think the program should be doing. They're often rather different. And generally if there's a key performance issue, you'll spot it with a moderate number of samples. I'll also use OS-level observability tools to lock for the existence of bottlenecks where threads contend for locks; other situations where threads are blocked; and the distribution of threads over the system. On Solaris some good tools are mpstat and too a lesser degree, vmstat. Try running "mpstat -a 5" in one window while the application program runs concurrently. One key measure is the voluntary context switch rate "vctx" or "csw" which reflects threads descheduling themselves. It's also good to look at the user; system; and idle CPU percentages. This can give a broad but useful understanding if your threads are mostly parked or mostly running. For instance if your program makes heavy use of malloc/free, then it might be the case you're contending on the central malloc lock in the default allocator. In that case you'd see malloc calling lock in the stack traces, observe a high csw/vctx rate as threads block for the malloc lock, and your "usr" time would be less than expected. Solaris dtrace is a wonderful and invaluable performance tool as well, but in a sense you have to frame and articulate a meaningful and specific question to get a useful answer, so I tend not to use it for first-order screening of problems. It's also most effective for OS and software-level performance issues as opposed to HW-level issues. For that reason I recommend mpstat & pstack as my the 1st step in performance triage. If some other OS-level issue is evident then it's good to switch to dtrace to drill more deeply into the problem. Only after I've ruled out OS-level issues do I switch to using hardware performance counters to look for architectural impediments.

  Read the article

• Optimizing a thread safe Java NIO / Serialization / FIFO Queue [migrated]

  - by trialcodr

  I've written a thread safe, persistent FIFO for Serializable items. The reason for reinventing the wheel is that we simply can't afford any third party dependencies in this project and want to keep this really simple. The problem is it isn't fast enough. Most of it is undoubtedly due to reading and writing directly to disk but I think we should be able to squeeze a bit more out of it anyway. Any ideas on how to improve the performance of the 'take'- and 'add'-methods? /** * <code>DiskQueue</code> Persistent, thread safe FIFO queue for * <code>Serializable</code> items. */ public class DiskQueue<ItemT extends Serializable> { public static final int EMPTY_OFFS = -1; public static final int LONG_SIZE = 8; public static final int HEADER_SIZE = LONG_SIZE * 2; private InputStream inputStream; private OutputStream outputStream; private RandomAccessFile file; private FileChannel channel; private long offs = EMPTY_OFFS; private long size = 0; public DiskQueue(String filename) { try { boolean fileExists = new File(filename).exists(); file = new RandomAccessFile(filename, "rwd"); if (fileExists) { size = file.readLong(); offs = file.readLong(); } else { file.writeLong(size); file.writeLong(offs); } } catch (FileNotFoundException e) { throw new RuntimeException(e); } catch (IOException e) { throw new RuntimeException(e); } channel = file.getChannel(); inputStream = Channels.newInputStream(channel); outputStream = Channels.newOutputStream(channel); } /** * Add item to end of queue. */ public void add(ItemT item) { try { synchronized (this) { channel.position(channel.size()); ObjectOutputStream s = new ObjectOutputStream(outputStream); s.writeObject(item); s.flush(); size++; file.seek(0); file.writeLong(size); if (offs == EMPTY_OFFS) { offs = HEADER_SIZE; file.writeLong(offs); } notify(); } } catch (IOException e) { throw new RuntimeException(e); } } /** * Clears overhead by moving the remaining items up and shortening the file. */ public synchronized void defrag() { if (offs > HEADER_SIZE && size > 0) { try { long totalBytes = channel.size() - offs; ByteBuffer buffer = ByteBuffer.allocateDirect((int) totalBytes); channel.position(offs); for (int bytes = 0; bytes < totalBytes;) { int res = channel.read(buffer); if (res == -1) { throw new IOException("Failed to read data into buffer"); } bytes += res; } channel.position(HEADER_SIZE); buffer.flip(); for (int bytes = 0; bytes < totalBytes;) { int res = channel.write(buffer); if (res == -1) { throw new IOException("Failed to write buffer to file"); } bytes += res; } offs = HEADER_SIZE; file.seek(LONG_SIZE); file.writeLong(offs); file.setLength(HEADER_SIZE + totalBytes); } catch (IOException e) { throw new RuntimeException(e); } } } /** * Returns the queue overhead in bytes. */ public synchronized long overhead() { return (offs == EMPTY_OFFS) ? 0 : offs - HEADER_SIZE; } /** * Returns the first item in the queue, blocks if queue is empty. */ public ItemT peek() throws InterruptedException { block(); synchronized (this) { if (offs != EMPTY_OFFS) { return readItem(); } } return peek(); } /** * Returns the number of remaining items in queue. */ public synchronized long size() { return size; } /** * Removes and returns the first item in the queue, blocks if queue is empty. */ public ItemT take() throws InterruptedException { block(); try { synchronized (this) { if (offs != EMPTY_OFFS) { ItemT result = readItem(); size--; offs = channel.position(); file.seek(0); if (offs == channel.size()) { truncate(); } file.writeLong(size); file.writeLong(offs); return result; } } return take(); } catch (IOException e) { throw new RuntimeException(e); } } /** * Throw away all items and reset the file. */ public synchronized void truncate() { try { offs = EMPTY_OFFS; file.setLength(HEADER_SIZE); size = 0; } catch (IOException e) { throw new RuntimeException(e); } } /** * Block until an item is available. */ protected void block() throws InterruptedException { while (offs == EMPTY_OFFS) { try { synchronized (this) { wait(); file.seek(LONG_SIZE); offs = file.readLong(); } } catch (IOException e) { throw new RuntimeException(e); } } } /** * Read and return item. */ @SuppressWarnings("unchecked") protected ItemT readItem() { try { channel.position(offs); return (ItemT) new ObjectInputStream(inputStream).readObject(); } catch (ClassNotFoundException e) { throw new RuntimeException(e); } catch (IOException e) { throw new RuntimeException(e); } } }

  Read the article

• In 10.10, USB 3.0 PCI Express card recognized by lspci but not lsusb or dmesg. How to fix?

  - by Paul

  Asus N PC, runs 10.10 x86_64 The Asus N comes with 4 usb 2.0 ports, each labelled 2.0 on the case. Attempting to add two usb 3.0 ports to be provided by a generic usb 3.0 pci express card installed in the pci expres slot. The new card says usb 3.0 and has the blue ports. The card is installed into the laptop unpowered, then the laptop is powered on and boots normally. Nothing happens when a USB 3.0 flash drive is inserted into the usb 3.0 port. uname -a Linux drpaulbrewer-N90SV 2.6.35.8 #1 SMP Fri Jan 14 15:54:11 EST 2011 x86_64 GNU/Linux lspci -v 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64 Kernel modules: sis-agp 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fa000000-fdefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [f4] Power Management version 2 Capabilities: [70] Subsystem: Silicon Integrated Systems [SiS] PCI-to-PCI bridge Kernel driver in use: pcieport 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) Flags: bus master, medium devsel, latency 0 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 128 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at ffe0 [size=16] Capabilities: [58] Power Management version 2 Kernel driver in use: pata_sis 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at f9fff000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02) Subsystem: ASUSTeK Computer Inc. Device 11f5 Flags: bus master, medium devsel, latency 0, IRQ 19 Memory at f9ffcc00 (32-bit, non-prefetchable) [size=128] I/O ports at cc00 [size=128] Capabilities: [40] Power Management version 2 Kernel driver in use: sis190 Kernel modules: sis190 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 17 I/O ports at c800 [size=8] I/O ports at c400 [size=4] I/O ports at c000 [size=8] I/O ports at bc00 [size=4] I/O ports at b800 [size=16] I/O ports at b400 [size=128] Capabilities: [58] Power Management version 2 Kernel driver in use: sata_sis Kernel modules: sata_sis 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fdf00000-fdffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=06, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe000000-febfffff Prefetchable memory behind bridge: 00000000f6000000-00000000f8ffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller Subsystem: ASUSTeK Computer Inc. Device 17b3 Flags: bus master, medium devsel, latency 0, IRQ 18 Memory at f9ff4000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce GT 130M] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 2021 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fa000000 (64-bit, non-prefetchable) [size=32M] I/O ports at dc00 [size=128] [virtual] Expansion ROM at fde80000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Kernel driver in use: nvidia Kernel modules: nvidia-current, nouveau, nvidiafb 02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Device 1a3b:1067 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Kernel driver in use: ath9k Kernel modules: ath9k 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at febfe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable- Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 lsusb Bus 003 Device 002: ID 0b05:1751 ASUSTek Computer, Inc. BT-253 Bluetooth Adapter Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg trying to post dmesg exceeded the stackexchange posting limit of 30K... but nothing there is usb 3.0

  Read the article

• Developing Schema Compare for Oracle (Part 5): Query Snapshots

  - by Simon Cooper

  If you've emailed us about a bug you've encountered with the EAP or beta versions of Schema Compare for Oracle, we probably asked you to send us a query snapshot of your databases. Here, I explain what a query snapshot is, and how it helps us fix your bug. Problem 1: Debugging users' bug reports When we started the Schema Compare project, we knew we were going to get problems with users' databases - configurations we hadn't considered, features that weren't installed, unicode issues, wierd dependencies... With SQL Compare, users are generally happy to send us a database backup that we can restore using a single RESTORE DATABASE command on our test servers and immediately reproduce the problem. Oracle, on the other hand, would be a lot more tricky. As Oracle generally has a 1-to-1 mapping between instances and databases, any databases users sent would have to be restored to their own instance. Furthermore, the number of steps required to get a properly working database, and the size of most oracle databases, made it infeasible to ask every customer who came across a bug during our beta program to send us their databases. We also knew that there would be lots of issues with data security that would make it hard to get backups. So we needed an easier way to be able to debug customers issues and sort out what strange schema data Oracle was returning. Problem 2: Test execution time Another issue we knew we would have to solve was the execution time of the tests we would produce for the Schema Compare engine. Our initial prototype showed that querying the data dictionary for schema information was going to be slow (at least 15 seconds per database), and this is generally proportional to the size of the database. If you're running thousands of tests on the same databases, each one registering separate schemas, not only would the tests would take hours and hours to run, but the test servers would be hammered senseless. The solution To solve these, we needed to be able to populate the schema of a database without actually connecting to it. Well, the IDataReader interface is the primary way we read data from an Oracle server. The data dictionary queries we use return their data in terms of simple strings and numbers, which we then process and reconstruct into an object model, and the results of these queries are identical for identical schemas. So, we can record the raw results of the queries once, and then replay these results to construct the same object model as many times as required without needing to actually connect to the original database. This is what query snapshots do. They are binary files containing the raw unprocessed data we get back from the oracle server for all the queries we run on the data dictionary to get schema information. The core of the query snapshot generation takes the results of the IDataReader we get from running queries on Oracle, and passes the row data to a BinaryWriter that writes it straight to a file. The query snapshot can then be replayed to create the same object model; when the results of a specific query is needed by the population code, we can simply read the binary data stored in the file on disk and present it through an IDataReader wrapper. This is far faster than querying the server over the network, and allows us to run tests in a reasonable time. They also allow us to easily debug a customers problem; using a simple snapshot generation program, users can generate a query snapshot that could be sent along with a bug report that we can immediately replay on our machines to let us debug the issue, rather than having to obtain database backups and restore databases to test systems. There are also far fewer problems with data security; query snapshots only contain schema information, which is generally less sensitive than table data. Query snapshots implementation However, actually implementing such a feature did have a couple of 'gotchas' to it. My second blog post detailed the development of the dependencies algorithm we use to ensure we get all the dependencies in the database, and that algorithm uses data from both databases to find all the needed objects - what database you're comparing to affects what objects get populated from both databases. We get information on these additional objects using an appropriate WHERE clause on all the population queries. So, in order to accurately replay the results of querying the live database, the query snapshot needs to be a snapshot of a comparison of two databases, not just populating a single database. Furthermore, although the code population queries (eg querying all_tab_cols to get column information) can simply be passed straight from the IDataReader to the BinaryWriter, we need to hook into and run the live dependencies algorithm while we're creating the snapshot to ensure we get the same WHERE clauses, and the same query results, as if we were populating straight from a live system. We also need to store the results of the dependencies queries themselves, as the resulting dependency graph is stored within the OracleDatabase object that is produced, and is later used to help order actions in synchronization scripts. This is significantly helped by the dependencies algorithm being a deterministic algorithm - given the same input, it will always return the same output. Therefore, when we're replaying a query snapshot, and processing dependency information, we simply have to return the results of the queries in the order we got them from the live database, rather than trying to calculate the contents of all_dependencies on the fly. Query snapshots are a significant feature in Schema Compare that really helps us to debug problems with the tool, as well as making our testers happier. Although not really user-visible, they are very useful to the development team to help us fix bugs in the product much faster than we otherwise would be able to.

  Read the article

• Examine your readiness for managing Enterprise Private Cloud

  - by Anand Akela

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Cloud computing promises to deliver greater agility to meet demanding  business needs, operational efficiencies, and lower cost. However these promises cannot be realized and enterprises may not be able to get the best value out of their enterprise private cloud computing infrastructure without a comprehensive cloud management solution . Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Take this new self-assessment quiz that measures the readiness of your enterprise private cloud. It scores your readiness in the following areas and discover where and how you can improve to gain total cloud control over your enterprise private cloud. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Complete Cloud Lifecycle Solution Check if you are ready to manage all phases of the building, managing, and consuming an enterprise cloud. You will learn how Oracle can help build and manage a rich catalog of cloud services – whether it is Infrastructure-as-a-Service, Database-as-a-Service, or Platform-as-a-Service, all from a single product. Integrated Cloud Stack Management Integrated management of the entire cloud stack – all the way from application to disk, is very important to eliminate the integration pains and costs that customers would have to otherwise incur by trying to create a cloud environment by integrating multiple point solutions. Business-Driven Clouds It is critical that an enterprise Cloud platform is not only able to run applications but also has deep business insight and visibility. Oracle Enterprise Manager 12c enables creation of application-aware and business-driven clouds that has deep insight into applications, business services and transactions. As the leading providers of business applications and the middleware, we are able to offer you a cloud solution that is optimized for business services. Proactive Management Integration of the enterprise cloud infrastructure with support can allow cloud administrators to benefit from Automatic Service Requests (ASR), proactive patch recommendations, health checks and end-of-life advisory for all of the technology deployed within cloud. Learn more about solution for Enterprise Cloud and Cloud management by attending various sessions , demos and hand-on labs at Oracle Open World 2012 . Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• Yes, I did it - Skydiving in Mauritius

  Finally, I did it or better said we did it. Already back in November last year I saw the big billboard advertisement of Skydive Austral Mauritius near Caudan Waterfront in Port Louis and decided for myself that this is going to be the perfect birthday gift for my wife. Simply out of curiosity I would join her tandem jump with a second instructor. Due to her pregnancy of our son I had to be patient... But then finally, her birthday had arrived and on our midnight celebration session I showed her her netbook with the website preloaded. Actually, it was the "perfect" timing... Recovery from her cesarean is fine, local weather conditions are gorgious and the children were under surveillance of my mum - spending her annual holidays on the island. So, after late wake-up in the morning, we packed our stuff and off we went. According to Google Maps direction indication we had to drive for roughly 50km (only) but traffic here in Mauritius is always challenging. The dropzone is at the Zone Industrielle Mon Loisir Sugar Estate near Riviere du Rempart at the northern east coast. Anyways, we were not in a hurry and arrived there shortly after noon. The access road to the airfield are just small down-driven paths through sugar cane fields and according to our daughter "it's bumpy!". True true true... The facilities at Skydive Austral Mauritius are complete except for food. Enough space for parking, easy handling at the reception and a lot to see for the kids. There's even a big terrace with several sets of tables and chairs, small bar for soft drinks, strictly non-alcoholic. The team over there is all welcoming and warm-hearthy! Having the kids with us was no issue at all. Quite the opposite, our daugther was allowed to discover a lot of things than we adults did. Even visiting the small air plane was on the menu for her. Really great stuff! While waiting for our turn we enjoyed watching other people getting ready in the jump gear, taking off with the Cessna, and finally coming back down on the tandem parachute. Actually, the different expressions on their faces was one of the best parts while waiting. Great mental preparation as my wife was getting more anxious about her first jump... {loadposition content_adsense} First, we got some information about the procedures on the plane about how to get seated, tight up with our instructors and how to get ready for the jump off the plane as soon as we arrive the height of 10.000 ft. All well explained and easy to understand after all.Next, we met with our jumpers Chris and Lee aka "Rasta" to get dressed and ready for take-off. Those guys are really cool and relaxed for their job. From that point on, the DVD session / recording for my wife's birthday started and we really had a lot of fun... The difference between that small Cessna and a commercial flight with an Airbus or a Boeing is astronomic! The climb up to 10.000 ft took us roughly 25 minutes and we enjoyed the magnificent view over the turquoise lagunes near Poste de Flacq, Lafayette and Isle d'Ambre on the north-east coast. After flying through the clouds we sun-bathed and looked over "iced-sugar covered" Mauritius. You might have a look at the picture gallery of Skydive Mauritius for better imagination. The moment of truth, or better said, point of no return came after approximately 25 minutes. The door opens, moving into position on the side on top of the wheel and... out! Back flip and free fall! Slight turns and Wooooohooooo! through the clouds... It so amazing and breath-taking! So undescribable! You have to experience this yourself! Some seconds later the parachute opened and we glided smoothly with some turns and spins back down to the dropzone. The rest of the family could hear and see us soon and the landing was easy going. We never had any doubts or fear about our instructors. They did a great job and we are looking forward to book our next job. I might even consider to follow educational classes on skydiving and earn a license. By the way, feel free to get in touch with Skydive Austral Mauritius. Either via contact details on their website or tweeting a little bit with them. Follow the tweets of Chris and fellows on SkydiveAustral.

  Read the article

• Developing Schema Compare for Oracle (Part 6): 9i Query Performance

  - by Simon Cooper

  All throughout the EAP and beta versions of Schema Compare for Oracle, our main request was support for Oracle 9i. After releasing version 1.0 with support for 10g and 11g, our next step was then to get version 1.1 of SCfO out with support for 9i. However, there were some significant problems that we had to overcome first. This post will concentrate on query execution time. When we first tested SCfO on a 9i server, after accounting for various changes to the data dictionary, we found that database registration was taking a long time. And I mean a looooooong time. The same database that on 10g or 11g would take a couple of minutes to register would be taking upwards of 30 mins on 9i. Obviously, this is not ideal, so a poke around the query execution plans was required. As an example, let's take the table population query - the one that reads ALL_TABLES and joins it with a few other dictionary views to get us back our list of tables. On 10g, this query takes 5.6 seconds. On 9i, it takes 89.47 seconds. The difference in execution plan is even more dramatic - here's the (edited) execution plan on 10g: -------------------------------------------------------------------------------| Id | Operation | Name | Bytes | Cost |-------------------------------------------------------------------------------| 0 | SELECT STATEMENT | | 108K| 939 || 1 | SORT ORDER BY | | 108K| 939 || 2 | NESTED LOOPS OUTER | | 108K| 938 ||* 3 | HASH JOIN RIGHT OUTER | | 103K| 762 || 4 | VIEW | ALL_EXTERNAL_LOCATIONS | 2058 | 3 ||* 20 | HASH JOIN RIGHT OUTER | | 73472 | 759 || 21 | VIEW | ALL_EXTERNAL_TABLES | 2097 | 3 ||* 34 | HASH JOIN RIGHT OUTER | | 39920 | 755 || 35 | VIEW | ALL_MVIEWS | 51 | 7 || 58 | NESTED LOOPS OUTER | | 39104 | 748 || 59 | VIEW | ALL_TABLES | 6704 | 668 || 89 | VIEW PUSHED PREDICATE | ALL_TAB_COMMENTS | 2025 | 5 || 106 | VIEW | ALL_PART_TABLES | 277 | 11 |------------------------------------------------------------------------------- And the same query on 9i: -------------------------------------------------------------------------------| Id | Operation | Name | Bytes | Cost |-------------------------------------------------------------------------------| 0 | SELECT STATEMENT | | 16P| 55G|| 1 | SORT ORDER BY | | 16P| 55G|| 2 | NESTED LOOPS OUTER | | 16P| 862M|| 3 | NESTED LOOPS OUTER | | 5251G| 992K|| 4 | NESTED LOOPS OUTER | | 4243M| 2578 || 5 | NESTED LOOPS OUTER | | 2669K| 1440 ||* 6 | HASH JOIN OUTER | | 398K| 302 || 7 | VIEW | ALL_TABLES | 342K| 276 || 29 | VIEW | ALL_MVIEWS | 51 | 20 ||* 50 | VIEW PUSHED PREDICATE | ALL_TAB_COMMENTS | 2043 | ||* 66 | VIEW PUSHED PREDICATE | ALL_EXTERNAL_TABLES | 1777K| ||* 80 | VIEW PUSHED PREDICATE | ALL_EXTERNAL_LOCATIONS | 1744K| ||* 96 | VIEW | ALL_PART_TABLES | 852K| |------------------------------------------------------------------------------- Have a look at the cost column. 10g's overall query cost is 939, and 9i is 55,000,000,000 (or more precisely, 55,496,472,769). It's also having to process far more data. What on earth could be causing this huge difference in query cost? After trawling through the '10g New Features' documentation, we found item 1.9.2.21. Before 10g, Oracle advised that you do not collect statistics on data dictionary objects. From 10g, it advised that you do collect statistics on the data dictionary; for our queries, Oracle therefore knows what sort of data is in the dictionary tables, and so can generate an efficient execution plan. On 9i, no statistics are present on the system tables, so Oracle has to use the Rule Based Optimizer, which turns most LEFT JOINs into nested loops. If we force 9i to use hash joins, like 10g, we get a much better plan: -------------------------------------------------------------------------------| Id | Operation | Name | Bytes | Cost |-------------------------------------------------------------------------------| 0 | SELECT STATEMENT | | 7587K| 3704 || 1 | SORT ORDER BY | | 7587K| 3704 ||* 2 | HASH JOIN OUTER | | 7587K| 822 ||* 3 | HASH JOIN OUTER | | 5262K| 616 ||* 4 | HASH JOIN OUTER | | 2980K| 465 ||* 5 | HASH JOIN OUTER | | 710K| 432 ||* 6 | HASH JOIN OUTER | | 398K| 302 || 7 | VIEW | ALL_TABLES | 342K| 276 || 29 | VIEW | ALL_MVIEWS | 51 | 20 || 50 | VIEW | ALL_PART_TABLES | 852K| 104 || 78 | VIEW | ALL_TAB_COMMENTS | 2043 | 14 || 93 | VIEW | ALL_EXTERNAL_LOCATIONS | 1744K| 31 || 106 | VIEW | ALL_EXTERNAL_TABLES | 1777K| 28 |------------------------------------------------------------------------------- That's much more like it. This drops the execution time down to 24 seconds. Not as good as 10g, but still an improvement. There are still several problems with this, however. 10g introduced a new join method - a right outer hash join (used in the first execution plan). The 9i query optimizer doesn't have this option available, so forcing a hash join means it has to hash the ALL_TABLES table, and furthermore re-hash it for every hash join in the execution plan; this could be thousands and thousands of rows. And although forcing hash joins somewhat alleviates this problem on our test systems, there's no guarantee that this will improve the execution time on customers' systems; it may even increase the time it takes (say, if all their tables are partitioned, or they've got a lot of materialized views). Ideally, we would want a solution that provides a speedup whatever the input. To try and get some ideas, we asked some oracle performance specialists to see if they had any ideas or tips. Their recommendation was to add a hidden hook into the product that allowed users to specify their own query hints, or even rewrite the queries entirely. However, we would prefer not to take that approach; as well as a lot of new infrastructure & a rewrite of the population code, it would have meant that any users of 9i would have to spend some time optimizing it to get it working on their system before they could use the product. Another approach was needed. All our population queries have a very specific pattern - a base table provides most of the information we need (ALL_TABLES for tables, or ALL_TAB_COLS for columns) and we do a left join to extra subsidiary tables that fill in gaps (for instance, ALL_PART_TABLES for partition information). All the left joins use the same set of columns to join on (typically the object owner & name), so we could re-use the hash information for each join, rather than re-hashing the same columns for every join. To allow us to do this, along with various other performance improvements that could be done for the specific query pattern we were using, we read all the tables individually and do a hash join on the client. Fortunately, this 'pure' algorithmic problem is the kind that can be very well optimized for expected real-world situations; as well as storing row data we're not using in the hash key on disk, we use very specific memory-efficient data structures to store all the information we need. This allows us to achieve a database population time that is as fast as on 10g, and even (in some situations) slightly faster, and a memory overhead of roughly 150 bytes per row of data in the result set (for schemas with 10,000 tables in that means an extra 1.4MB memory being used during population). Next: fun with the 9i dictionary views.

  Read the article

• Increasing efficiency of N-Body gravity simulation

  - by Postman

  I'm making a space exploration type game, it will have many planets and other objects that will all have realistic gravity. I currently have a system in place that works, but if the number of planets goes above 70, the FPS decreases an practically exponential rates. I'm making it in C# and XNA. My guess is that I should be able to do gravity calculations between 100 objects without this kind of strain, so clearly my method is not as efficient as it should be. I have two files, Gravity.cs and EntityEngine.cs. Gravity manages JUST the gravity calculations, EntityEngine creates an instance of Gravity and runs it, along with other entity related methods. EntityEngine.cs public void Update() { foreach (KeyValuePair<string, Entity> e in Entities) { e.Value.Update(); } gravity.Update(); } (Only relevant piece of code from EntityEngine, self explanatory. When an instance of Gravity is made in entityEngine, it passes itself (this) into it, so that gravity can have access to entityEngine.Entities (a dictionary of all planet objects)) Gravity.cs namespace ExplorationEngine { public class Gravity { private EntityEngine entityEngine; private Vector2 Force; private Vector2 VecForce; private float distance; private float mult; public Gravity(EntityEngine e) { entityEngine = e; } public void Update() { //First loop foreach (KeyValuePair<string, Entity> e in entityEngine.Entities) { //Reset the force vector Force = new Vector2(); //Second loop foreach (KeyValuePair<string, Entity> e2 in entityEngine.Entities) { //Make sure the second value is not the current value from the first loop if (e2.Value != e.Value ) { //Find the distance between the two objects. Because Fg = G * ((M1 * M2) / r^2), using Vector2.Distance() and then squaring it //is pointless and inefficient because distance uses a sqrt, squaring the result simple cancels that sqrt. distance = Vector2.DistanceSquared(e2.Value.Position, e.Value.Position); //This makes sure that two planets do not attract eachother if they are touching, completely unnecessary when I add collision, //For now it just makes it so that the planets are not glitchy, performance is not significantly improved by removing this IF if (Math.Sqrt(distance) > (e.Value.Texture.Width / 2 + e2.Value.Texture.Width / 2)) { //Calculate the magnitude of Fg (I'm using my own gravitational constant (G) for the sake of time (I know it's 1 at the moment, but I've been changing it) mult = 1.0f * ((e.Value.Mass * e2.Value.Mass) / distance); //Calculate the direction of the force, simply subtracting the positions and normalizing works, this fixes diagonal vectors //from having a larger value, and basically makes VecForce a direction. VecForce = e2.Value.Position - e.Value.Position; VecForce.Normalize(); //Add the vector for each planet in the second loop to a force var. Force = Vector2.Add(Force, VecForce * mult); //I have tried Force += VecForce * mult, and have not noticed much of an increase in speed. } } } //Add that force to the first loop's planet's position (later on I'll instead add to acceleration, to account for inertia) e.Value.Position += Force; } } } } I have used various tips (about gravity optimizing, not threading) from THIS question (that I made yesterday). I've made this gravity method (Gravity.Update) as efficient as I know how to make it. This O(N^2) algorithm still seems to be eating up all of my CPU power though. Here is a LINK (google drive, go to File download, keep .Exe with the content folder, you will need XNA Framework 4.0 Redist. if you don't already have it) to the current version of my game. Left click makes a planet, right click removes the last planet. Mouse moves the camera, scroll wheel zooms in and out. Watch the FPS and Planet Count to see what I mean about performance issues past 70 planets. (ALL 70 planets must be moving, I've had 100 stationary planets and only 5 or so moving ones while still having 300 fps, the issue arises when 70+ are moving around) After 70 planets are made, performance tanks exponentially. With < 70 planets, I get 330 fps (I have it capped at 300). At 90 planets, the FPS is about 2, more than that and it sticks around at 0 FPS. Strangely enough, when all planets are stationary, the FPS climbs back up to around 300, but as soon as something moves, it goes right back down to what it was, I have no systems in place to make this happen, it just does. I considered multithreading, but that previous question I asked taught me a thing or two, and I see now that that's not a viable option. I've also thought maybe I could do the calculations on my GPU instead, though I don't think it should be necessary. I also do not know how to do this, it is not a simple concept and I want to avoid it unless someone knows a really noob friendly simple way to do it that will work for an n-body gravity calculation. (I have an NVidia gtx 660) Lastly I've considered using a quadtree type system. (Barnes Hut simulation) I've been told (in the previous question) that this is a good method that is commonly used, and it seems logical and straightforward, however the implementation is way over my head and I haven't found a good tutorial for C# yet that explains it in a way I can understand, or uses code I can eventually figure out. So my question is this: How can I make my gravity method more efficient, allowing me to use more than 100 objects (I can render 1000 planets with constant 300+ FPS without gravity calculations), and if I can't do much to improve performance (including some kind of quadtree system), could I use my GPU to do the calculations?

  Read the article

• 2012&ndash;The End Of The World Review

  - by Tim Murphy

  The end of the world must be coming.  Not because the Mayan calendar says so, but because Microsoft is innovating more than Apple.  It has been a crazy year, with pundits declaring not that the end of the world is coming, but that the end of Microsoft is coming.  Let’s take a look at what 2012 has brought us. The beginning of year is a blur.  I managed to get to TechEd in June which was the first time that I got to take a deep dive into Windows 8 and many other things that had been announced in 2011.  The promise I saw in these products was really encouraging.  The thought of being able to run Windows 8 from a thumb drive or have Hyper-V native to the OS told me that at least for developers good things were coming. I finally got my feet wet with Windows 8 with the developer preview just prior to the RTM.  While the initial experience was a bit of a culture shock I quickly grew to love it.  The media still seems to hold little love for the “reimagined” platform, but I think that once people spend some time with it they will enjoy the experience and what the FUD mongers say will fade into the background.  With the launch of the OS we finally got a look at the Surface.  I think this is a bold entry into the tablet market.  While I wish it was a little more affordable I am already starting to see them in the wild being used by non-techies. I was waiting for Windows Phone 8 at least as much as Windows 8, probably more.  The new hardware, better marketing and new OS features I think are going to finally push us to the point of having a real presence in the smartphone market.  I am seeing a number of iPhone users picking up a Nokia Lumia 920 and getting rid of their brand new iPhone 5.  The only real debacle that I saw around the launch was when they held back the SDK from general developers. Shortly after the launch events came Build 2012.  I was extremely disappointed that I didn’t make it to this year’s Build.  Even if they weren’t handing out Surface and Lumia devices I think the atmosphere and content were something that really needed to be experience in person.  Hopefully there will be a Build next year and it’s schedule will be announced soon.  As you would expect Windows 8 and Windows Phone 8 development were the mainstay of the conference, but improvements in Azure also played a key role.  This movement of services to the cloud will continue and we need to understand where it best fits into the solutions we build. Lower on the radar this year were Office 2013, SQL Server 2012, and Windows Server 2012.  Their glory stolen by the consumer OS and hardware announcements, these new releases are no less important.  Companies will see significant improvements in performance and capabilities if they upgrade.  At TechEd they had shown some of the new features of Windows Server 2012 around hardware integration and Hyper-V performance which absolutely blew me away.  It is our job to bring these important improvements to our company’s attention so that they can be leveraged. Personally, the consulting business in 2012 was the busiest it has been in a long time.  More companies were ready to attack new projects after several years of putting them on the back burner.  I also worked to bring back momentum to the Chicago Information Technology Architects Group.  Both the community and clients are excited about the new technologies that have come out in 2012 and now it is time to deliver. What does 2013 have in store.  I don’t see it be quite as exciting as 2012.  Microsoft will be releasing the Surface Pro in January and it seems that we will see more frequent OS update for Windows.  There are rumors that we may see a Surface phone in 2013.  It has also been announced that there will finally be a rework of the XBox next fall.  The new year will also be a time for us in the development community to take advantage of these new tools and devices.  After all, it is what we build on top of these platforms that will attract more consumers and corporations to using them. Just as I am 99.999% sure that the world is not going to end this year, I am also sure that Microsoft will move on and that most of this negative backlash from the media is actually fear and jealousy.  In the end I think we have a promising year ahead of us. del.icio.us Tags: Microsoft,Pundits,Mayans,Windows 8,Windows Phone 8,Surface

  Read the article

• No More NCrunch For Me

  - by Steve Wilkes

  When I opened up Visual Studio this morning, I was greeted with this little popup: NCrunch is a Visual Studio add-in which runs your tests while you work so you know if and when you've broken anything, as well as providing coverage indicators in the IDE and coverage metrics on demand. It recently went commercial (which I thought was fair enough), and time is running out for the free version I've been using for the last couple of months. From my experiences using NCrunch I'm going to let it expire, and go about my business without it. Here's why. Before I start, let me say that I think NCrunch is a good product, which is to say it's had a positive impact on my programming. I've used it to help test-drive a library I'm making right from the start of the project, and especially at the beginning it was very useful to have it run all my tests whenever I made a change. The first problem is that while that was cool to start with, it’s recently become a bit of a chore. Problems Running Tests NCrunch has two 'engine modes' in which it can run tests for you - it can run all your tests when you make a change, or it can figure out which tests were impacted and only run those. Unfortunately, it became clear pretty early on that that second option (which is marked as 'experimental') wasn't really working for me, so I had to have it run everything. With a smallish number of tests and while I was adding new features that was great, but I've now got 445 tests (still not exactly loads) and am more in a 'clean and tidy' mode where I know that a change I'm making will probably only affect a particular subset of the tests. With that in mind it's a bit of a drag sitting there after I make a change and having to wait for NCrunch to run everything. I could disable it and manually run the tests I know are impacted, but then what's the point of having NCrunch? If the 'impacted only' engine mode worked well this problem would go away, but that's not what I found. Secondly, what's wrong with this picture? I've got 445 tests, and NCrunch has queued 455 tests to run. So it's queued duplicate tests - in this quickly-screenshotted case 10, but I've seen the total queue get up over 600. If I'm already itchy waiting for it to run all my tests against a change I know only affects a few, I'm even itchier waiting for it to run a lot of them twice. Problems With Code Coverage NCrunch marks each line of code with a dot to say if it's covered by tests - a black dot says the line isn't covered, a red dot says it's covered but at least one of the covering tests is failing, and a green dot means all the covering tests pass. It also calculates coverage statistics for you. Unfortunately, there's a couple of flaws in the coverage. Firstly, it doesn't support ExcludeFromCodeCoverage attributes. This feature has been requested and I expect will be included in a later release, but right now it doesn't. So this: ...is counted as a non-covered line, and drags your coverage statistics down. Hmph. As well as that, coverage of certain types of code is missed. This: ...is definitely covered. I am 100% absolutely certain it is, by several tests. NCrunch doesn't pick it up, down go my coverage statistics. I've had NCrunch find genuinely uncovered code which I've been able to remove, and that's great, but what's the coverage percentage on this project? Umm... I don't know. Conclusion None of these are major, tool-crippling problems, and I expect NCrunch to get much better in future releases. The current version has some great features, like this: ...that's a line of code with a failing test covering it, and NCrunch can run that failing test and take me to that line exquisitely easily. That's awesome! I'd happily pay for a tool that can do that. But here's the thing: NCrunch (currently) costs $159 (about £100) for a personal licence and $289 (about £180) for a commercial one. I'm not sure which one I'd need as my project is a personal one which I'm intending to open-source, but I'm a professional, self-employed developer, but in any case - that seems like a lot of money for an imperfect tool. If it did everything it's advertised to do more or less perfectly I'd consider it, but it doesn't. So no more NCrunch for me.

  Read the article

< Previous Page | 651 652 653 654 655 656 657 658 659 660 661 662  | Next Page >