Search Results

Search found 30947 results on 1238 pages for 'html helper'.

Page 657/1238 | < Previous Page | 653 654 655 656 657 658 659 660 661 662 663 664  | Next Page >

• Apache 2.4 with PHP-FPM

  - by tubaguy50035

  I'm trying to setup Apache 2.4 with PHP-FPM 5.4 using the new modules with Apache 2.4. The following is what I have currently in my virtual host file: <VirtualHost *:80> ServerAdmin root@localhost DocumentRoot /var/www #Directory permissions <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Require all granted </Directory> CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> I have PHP-FPM running using Unix sockets with a sock file located at /var/run/php5-fpm.sock. How do I proxy my requests to this sock file? I've seen some sites say to use ProxyPassMatch and others are saying Rewrite Rule. Are there pros or cons on either side? Also, most sites I'm seeing are showing ProxyPassMatch with a regex to only pass .php files. Could I also send it .html files? For whatever reason, we have a ton of PHP inside .html files. Edit: As noted in the comments, it looks like mod_proxy_fcgi doesn't support Unix sockets. Is there another module I should be using?

  Read the article

• Help, I need to debug my BrowserHelperObject (BHO) (in C++) after a internet explorer 8 crash in Rel

  - by BHOdevelopper

  Hi, here is the situation, i'm developping a Browser Helper Object (BHO) in C++ with Visual Studio 2008, and i learned that the memory wasn't managed the same way in Debug mode than in Release mode. So when i run my BHO in debug mode, internet explorer 8 works just fine and i got no erros at all, the browser stays alive forever, but as soon as i compile it in release mode, i got no errors, no message, nothing, but after 5 minutes i can see through the task manager that internet explorer instances are just eating memory and then the browser just stop responding every time. Please, I really need some hint on how to get a feedback on what could be the error. I heard that, often it was happening because of memory mismanagement. I need a software that just grab a memory dump or something when iexplorer crashes to help me find the problem. Any help is appreciated, I'll be looking for responses every single days, thank you.

  Read the article

• Redirect 301 fails with a path as destination

  - by Martijn Heemels

  I'm using a large number of Redirect 301's which are suddenly failing on a new webserver. We're in pre-production tests on the new webserver, prior to migrating the sites, but some sites are failing with 500 Internal Server Error. The content, both databases and files, are mirrored from the old to the new server, so we can test if all sites work properly. I traced this problem to mod_alias' Redirect statement, which is used from .htaccess to redirect visitors and search engines from old content to new pages. Apparently the Apache server requires the destination to be a full url, including protocol and hostname. Redirect 301 /directory/ /target/ # Not Valid Redirect 301 /main.html / # Not Valid Redirect 301 /directory/ http://www.example.com/target/ # Valid Redirect 301 /main.html http://www.example.com/ # Valid This contradicts the Apache documentation for Apache 2.2, which states: The new URL should be an absolute URL beginning with a scheme and hostname, but a URL-path beginning with a slash may also be used, in which case the scheme and hostname of the current server will be added. Of course I verified that we're using Apache 2.2 on both the old and the new server. The old server is a Gentoo box with Apache 2.2.11, while the new one is a RHEL 5 box with Apache 2.2.3. The workaround would be to change all paths to full URL's, or to convert the statements to mod_rewrite rules, but I'd prefer the documented behaviour. What are your experiences?

  Read the article

• Apache config: Permissions, Directories and Locations

  - by James Murphy

  I'm trying to get my head around apache configuration to fix a problem I'm having but after a few hours I've decided to ask here. This is what I've got at the moment: DocumentRoot "/var/www/html" <Directory /> Options None AllowOverride None Deny from all </Directory> <Directory /var/svn> Options FollowSymLinks AllowOverride None Allow from all </Directory> <Directory /opt/hg> Options FollowSymLinks AllowOverride None Allow from all </Directory> <Location /hg> AuthType Digest AuthName "Engage HG" AuthDigestProvider file AuthUserFile /opt/hg/hgweb.users Require valid-user </Location> WSGISocketPrefix /var/run/wsgi WSGIDaemonProcess hg processes=3 threads=15 WSGIProcessGroup hg WSGIScriptAlias /hg "/opt/hg/hgweb.wsgi" <Location /svn> DAV svn SVNPath /var/svn/repos AuthType Basic AuthName "Subversion" AuthUserFile /etc/httpd/conf/users require valid-user </Location> I'm trying to get my head around how it's all laid out and how directories relate to locations/etc For /hg I get asked for a password but to /svn I get a 403 forbidden... the error I get is: [client 10.80.10.169] client denied by server configuration: /var/www/html/svn When I remove the entry it works fine.. I can't figure out how to get it linking to the /var/svn directory

  Read the article

• mod_fcgi produces random 500 Errors

  - by DmitrySemenov

  php 5.4.7 via mod_fcgi when I run the site sometimes it works, sometimes it crashed with 500 Internal Error, this is what I see in error.log everytime I run the script [Mon Sep 24 18:50:43 2012] [warn] [client 68.231.194.198] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Mon Sep 24 18:50:43 2012] [error] [client 68.231.194.198] Premature end of script headers: api.php any ideas? vhost config: <VirtualHost :80> ServerAdmin [email protected] DocumentRoot "/home/www/sites/test.com/html/development" ServerName test.com ServerAlias www.test.com ErrorLog "/home/www/sites/test.com/logs/error_log" CustomLog "/home/www/sites/test.com/logs/access_log" common <IfModule mod_fcgid.c> <Directory /home/www/sites/test.com/html/development> Options +ExecCGI AllowOverride All AddHandler fcgid-script .php FCGIWrapper /home/www/php-fcgi-scripts/php-fcgi-starter .php Order allow,deny Allow from all </Directory> FcgidMaxRequestLen 1073741824 </VirtualHost> fcgi.d conf LoadModule fcgid_module modules/mod_fcgid.so # Use FastCGI to process .fcg .fcgi & .fpl scripts AddHandler fcgid-script fcg fcgi fpl # Sane place to put sockets and shared memory file FcgidIPCDir /var/run/mod_fcgid FcgidProcessTableFile /var/run/mod_fcgid/fcgid_shm IdleTimeout 300 BusyTimeout 300 ProcessLifeTime 7200 IPCConnectTimeout 300 IPCCommTimeout 7200 PHP_Fix_Pathinfo_Enable 1 php-fcgi-starter.php #!/bin/sh PHP_CGI=/usr/local/php547/bin/php-cgi PHP_INI=/etc/php547-fastcgi.ini export PHP_FCGI_TIMEOUT=1200 #export PHP_FCGI_CHILDREN=6 export PHP_FCGI_MAX_REQUESTS=1000 exec $PHP_CGI -c $PHP_INI

  Read the article

• Who should I run mysql as, on a personal computer?

  - by user664833

  I just installed mysql via homebrew (with brew install mysql, on Mac OS X Mountain Lion - recently installed from scratch). Following the installation, there is a "caveats" section with options around further necessary actions to take: ==> Caveats Set up databases to run AS YOUR USER ACCOUNT with: unset TMPDIR mysql_install_db --verbose --user=`whoami` --basedir="$(brew --prefix mysql)" --datadir=/usr/local/var/mysql --tmpdir=/tmp To set up base tables in another folder, or use a different user to run mysqld, view the help for mysqld_install_db: mysql_install_db --help and view the MySQL documentation: * http://dev.mysql.com/doc/refman/5.5/en/mysql-install-db.html * http://dev.mysql.com/doc/refman/5.5/en/default-privileges.html To run as, for instance, user "mysql", you may need to `sudo`: sudo mysql_install_db ...options... Start mysqld manually with: mysql.server start Note: if this fails, you probably forgot to run the first two steps up above A "/etc/my.cnf" from another install may interfere with a Homebrew-built server starting up correctly. To connect: mysql -uroot To launch on startup: * if this is your first install: mkdir -p ~/Library/LaunchAgents cp /usr/local/Cellar/mysql/5.5.27/homebrew.mxcl.mysql.plist ~/Library/LaunchAgents/ launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist * if this is an upgrade and you already have the homebrew.mxcl.mysql.plist loaded: launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist cp /usr/local/Cellar/mysql/5.5.27/homebrew.mxcl.mysql.plist ~/Library/LaunchAgents/ launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist You may also need to edit the plist to use the correct "UserName". On previous versions of Mac OS X I ran mysql as mysql user, but now I am confronted by the idea of running it as myself. I am the only one who uses this computer (which happens to be my laptop), and I do programming for work and for pleasure. What are the pros & cons, or best practices, around choosing whether to run mysql AS YOUR USER ACCOUNT or as mysql or something else still?

  Read the article

• Could it be that "chkrootkit" just doesn't like .hmac, .packlist, and .relocation-tag files?

  - by Danijel

  I just cleaned up my hacked CentOS server (due to not updating since versino 5.3). But still, "chkrootkit" says this: Possible t0rn v8 \(or variation\) rootkit installed /usr/lib/.libfipscheck.so.1.1.0.hmac /usr/lib/.libgcrypt.so.11.hmac /usr/lib/.libfipscheck.so.1.hmac /lib/.libcrypto.so.0.9.8e.hmac /lib/.libssl.so.0.9.8e.hmac /lib/.libssl.so.6.hmac /lib/.libcrypto.so.6.hmac /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi/auto/Text/Iconv/.packlist /usr/lib/perl5/5.8.8/i386-linux-thread-multi/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/HTML-Tree/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/Font/AFM/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/MLDBM/Sync/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/MLDBM/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/FreezeThaw/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/Apache/ASP/.packlist /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/auto/HTML-Format/.packlist /usr/lib/gtk-2.0/immodules/.relocation-tag /usr/lib/python2.4/plat-linux2/.relocation-tag /usr/lib/python2.4/distutils/.relocation-tag /usr/lib/python2.4/config/.relocation-tag Could it be that "chkrootkit" just doesn't like .hmac, .packlist, and .relocation-tag files? Are these realy still infected?

  Read the article

• Completely unintuitive Apache/PHP memory-freeing behavior

  - by David

  Okay, this one's weird. I have a Turnkey Linux server with a gig of dedicated RAM. It's running WP3.2 with a boatload of plug-ins. It's a new site, so it has very limited traffic (other than search engines, maybe 20 hits a week). Now, for a few weeks, every few days, it would max out on main RAM, start eating up virtual RAM, and then crash. It's had this behavior for a while and I've been trying to figure out which element was causing the crash. Nine days ago, I pointed my external server monitor to this server. I wrote a 5-line HTML file (not PHP and not WP) that the server monitor accesses every minute, to see if the server is up. So, now, nine days later, the server has been rock solid, up all the time, no memory leak at all. I changed NOTHING on the server itself to see this behavior change. Have you EVER seen anything like this? All the server monitor is doing is retrieving a single, super-simple HTML file and all the memory leak problems have gone away. Weird, eh?

  Read the article

• PhpMyAdmin 500 Internal Server Error on Nginx/php5-fpm/Debian

  - by ThrownAway

  I downloaded PhpMyAdmin a while ago and am having a hard time getting it to work. Requesting localhost/phpmyadmin gives a 500 Internal Server Error response, but there's nothing in the error log. These are the steps I did: Downloaded the newest phpmyadmin and unzipped all the files to /var/vhosts/phpmyadmin/www/ Created a new php5-fpm pool and a server block on nginx Changed the owner of all the files inside phpmyadmin/ Tried requesting localhost/phpmyadmin and localhost/phpmyadmin/setup The phpmyadmin is running inside a chroot, and all the files are owned by www-data so it shouldn't be a permission error. I made a new php file in the same directory to produce an error and it logs just fine so it has to be just phpmyadmin. Here's my php5-fpm pool: [phpmyadmin] listen = /var/vhosts/phpmyadmin/tmp/.php.sock; user = www-data group = www-data chroot = /var/vhosts/phpmyadmin/ chdir = / php_admin_value[error_reporting] = E_ALL php_admin_value[error_log] = error.log php_admin_flag[log_errors] = on php_admin_flag[display_errors] = on php_value[session.save_handler] = files php_value[session.save_path] = /tmp And Nginx server block: server { listen 80; root /var/vhosts/phpmyadmin/www; server_name pma.domain; location / { try_files $uri $uri/ /index.html; autoindex on; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; include fastcgi_params; fastcgi_pass unix:/var/vhosts/phpmyadmin/tmp/.php.sock; fastcgi_param SCRIPT_FILENAME /www$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param DOCUMENT_ROOT /www; } index index.html index.htm index.php; try_files $uri $uri/ =404; } Any ideas what could be wrong? Why is it not producing any errors even though I've forced them to be on?

  Read the article

• Allowing directory view/traversal for a specific VirtualHost in Apache 2.2

  - by warren

  I have the following vhost configured: <VirtualHost *:80> DocumentRoot /var/www/myvhost ServerName myv.host.com ServerAlias myv.host.com ErrorLog logs/myvhost-error_log CustomLog logs/myvhost-access_log combined ServerAdmin [email protected] <Directory /var/www/myvhost> AllowOverride All Options +Indexes </Directory> </VirtualHost> The configuration appears to be correct from the apachectl tool's perspective. However, I cannot get a directory listing on that vhost: Forbidden You don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. The error log shows the following: [Wed Mar 07 19:23:33 2012] [error] [client 66.6.145.214] Directory index forbidden by Options directive: /var/www/****** update2 More recently, the following is now kicking-into the error.log: [Wed Mar 07 20:16:10 2012] [error] [client 192.152.243.233] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/error/noindex.html update3 Today, the following is getting kicked-out: [Thu Mar 08 14:05:56 2012] [error] [client 66.6.145.214] Directory index forbidden by Options directive: /var/www/<mydir> [Thu Mar 08 14:05:56 2012] [error] [client 66.6.145.214] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/error/noindex.html [Thu Mar 08 14:05:57 2012] [error] [client 66.6.145.214] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace. This is after modifying the vhosts.conf file thusly: <VirtualHost *:80> DocumentRoot /var/www/<mydir> ServerName myhost ServerAlias myhost ErrorLog logs/myhost-error_log CustomLog logs/myhost-access_log combined ServerAdmin admin@myhost <Directory "/var/www/<mydir>"> Options All +Indexes +FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> What is missing? update 4 All subdirectories of the root directory do directory listings properly - it is only the root which cannot.

  Read the article

• Apache mod_proxy

  - by mhouston100

  Uggh, I'm spewing that I can't figure this out, I'm so frustrated: <VirtualHost *:80> servername domain1.com.au ServerAdmin webmaster@localhost DocumentRoot /var/www/html ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined <Proxy *> Order Allow,Deny Allow from all </Proxy> RewriteEngine on ReWriteCond %{SERVER_PORT} !^443$ RewriteRule ^/(.*) https://%{HTTP_HOST}/$1 [NC,R,L] </VirtualHost> <VirtualHost *:443> servername domain1.com.au SSLEngine on SSLCertificateFile /etc/apache2/ssl/owncloud.pem SSLCertificateKeyFile /etc/apache2/ssl/owncloud.key DocumentRoot /var/www/html </VirtualHost> <VirtualHost *:*> Servername domain2.com.au ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / https://192.168.1.12/ ProxyPassReverse / https://192.168.1.12/ </VirtualHost> Not sure if it's clear what I'm trying to do, but I've read and read and READ, I still can't figure it out. Basically I have a working Apache server with a rewrite to force HTTPS, as seen in the first two VirtualHost entries. I now have a webmail service I set up on another server, under another domain name, however I only have one incoming public IP address. So I'm trying to have any incoming requests for the second domain to be proxied to the other server to access the webmail, whether its port 80 or 443. IMAP and POP3 are no problems, I can just forward the ports directly to the correct server. The results of the above configuration is that requests to domain2.com.au (port 80 or 443) are forwarded to https://domain1.com.au. Am I headed in the right direction?

  Read the article

• nginx codeigniter rewrite: Controller name conflicts with directory

  - by palerdot

  I'm trying out nginx and porting my existing apache configuration to nginx. I have managed to reroute the codeigniter url's successfully, but I'm having a problem with one particular controller whose name coincides with a directory in site root. I managed to make my codeigniter url's work as it did in Apache except that, I have a particular url say http://localhost/hello which coincides with a hello directory in site root. Apache had no problem with this. But nginx routes to this directory instead of the controller. My reroute structure is as follows http://host_name/incoming_url => http://host_name/index.php/incoming_url All the codeigniter files are in site root. My nginx configuration (relevant parts) location / { # First attempt to serve request as file, then # as directory, then fall back to index.html index index.php index.html index.htm; try_files $uri $uri/ /index.php/$request_uri; #apache rewrite rule conversion if (!-e $request_filename){ rewrite ^(.*)/?$ /index.php?/$1 last; } # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location ~ \.php.*$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # With php5-cgi alone: fastcgi_pass 127.0.0.1:9000; # With php5-fpm: #fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } I'm new to nginx and I need help in figuring out this directory conflict with the Controller name. I figured this configuration from various sources in the web, and any better way of writing my configuration is greatly appreciated.

  Read the article

• Apache https is slsow

  - by raucous12

  Hey, I've set apache up to use SSL with a self signed certificate. With http (KeepAlive off), I can get over 5000 requests per second. However, with https, I can only get 13 requests per second. I know there is supposed to be a bit of an overhead, but this seems abnormal. Can anyone suggest how I might go about debugging this. Here is the ab log for https: Server Software: Apache/2.2.3 Server Hostname: 127.0.0.1 Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,DHE-RSA-AES256-SHA,4096,256 Document Path: /hello.html Document Length: 29 bytes Concurrency Level: 5 Time taken for tests: 30.49425 seconds Complete requests: 411 Failed requests: 0 Write errors: 0 Total transferred: 119601 bytes HTML transferred: 11919 bytes Requests per second: 13.68 [#/sec] (mean) Time per request: 365.565 [ms] (mean) Time per request: 73.113 [ms] (mean, across all concurrent requests) Transfer rate: 3.86 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 190 347 74.3 333 716 Processing: 0 14 24.0 1 166 Waiting: 0 11 21.6 0 165 Total: 191 361 80.8 345 716 Percentage of the requests served within a certain time (ms) 50% 345 66% 377 75% 408 80% 421 90% 468 95% 521 98% 578 99% 596 100% 716 (longest request)

  Read the article

• Install multiport module on iptables

  - by tarteauxfraises

  I'am trying to install "fail2ban" on Cubidebian, a Debian port for Cubieboard (A raspberry like board). The following rule failed due to "-m multiport --dports ssh" options (It works, when i run manually the command without multiple options). $ iptables -I INPUT -p tcp -m multiport --dports ssh -j fail2ban-ssh" iptables: No chain/target/match by that name. When i make a cat on "/proc/net/ip_tables_matches", i see that multiport module is not loaded: $ cat /proc/net/ip_tables_matches u32 time string statistic state owner pkttype mac limit helper connmark mark ah icmp socket socket quota2 policy length iprange ttl hashlimit ecn udplite udp tcp What can i do to compile or to enable the multiport module? Thanks in advance for your help

  Read the article

• Good HTTP Monitoring tools

  - by ffffff

  I look for HTTP to work with a Linux system server monitor tool every protocol. I know, and will not there be it in whom or a freeware? When, for example, I dump 80/tcp with a packet monitor to be concrete # tethereal -i ppp0 port 80 -x Capturing on ppp0 1244206390.030474 219.111.xx.xx -> 74.125.xx.xx HTTP GET /search?output=js&num=0&dt=1244206414703&client=pub-3031568651010206&q=Cagliari%20Flight&ad=n3&ie=utf8&oe=utf8&channel=0091594208&adtest=off HTTP/1.1 0000 00 04 02 00 00 00 00 00 00 00 00 00 00 00 08 00 ................ 0010 45 00 01 e5 ee 82 40 00 40 06 d2 b5 db 6f 02 5b E.....@[email protected].[ 0020 4a 7d 4f 93 d4 29 00 50 3e df 4c 63 4b 6b 42 e0 J}O..).P>.LcKkB Such output is provided, but there is too much unnecessary information such as an SYN packet or a header. What I want The IP address of the client and sending out character string(Get; the contents of the POST) Among the output character string of the server only as for the HTML (Content-Type:) I am what is chisel) of a thing of text/html. I can set a filter and am the best if only information wanting can accumulate in the log.

  Read the article

• Configure New Server for .htaccess

  - by Phil T

  I have a new LAMP CENTOS 5 server I am setting up and trying to copy the configuration from another web server I have. I am stuck with what I think is a mod_rewrite problem. If I go to http://old-server.com/any_page_name.php it correctly routes through some handling code in index.php and shows me a graceful "Page Cannot Be Displayed" message. But if I go to http://new-server.com/any_page_name.php I get an ugly Apache 404 Not Found error message. I looked in both httpd.conf files and they both have only one reference to mod_rewrite. LoadModule rewrite_module modules/mod_rewrite.so So it seems like that should be fine. At the bottom of httpd.conf I have the code: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html ServerName new-server.com ErrorLog logs/new-server.com-error_log CustomLog logs/new-server.com-access_log common </VirtualHost> Then in the root of /var/www/html I have the exact same .htaccess file that looks like this: RewriteEngine on Options +FollowSymlinks RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . index.php [L] ErrorDocument 404 /page-unavailable/ <files ~ "\.tpl$"> order deny,allow allow from none deny from all </files> So I don't see why the page load at old-server.com works fine while new-server.com doesn't route through index.php like I want it to do. Thanks.

  Read the article

• Nginx Server Block Not Working? - Already running other vhosts just this one not working

  - by daveaspinall

  Im running a Debian 6 LEMP server with multiple virtual hosts and everything has been fine for 5 or so sites. But I've just tried adding another but for some reason it's just not working. By not working I mean in Chrome I get the "Oops! Google Chrome could not connect to subdomain.domain.net" error. I've changed the domain for security to subdomain.example.com and the IP is masked. Hosts file (I have multiple sub domains): xxx.xxx.xx.xxx *.example.com *.example Server Block: server { listen 80; server_name subdomain.example.com; access_log /srv/www/subdomain.example.com/logs/access.log; error_log /srv/www/subdomain.example.com/logs/error.log; root /srv/www/subdomain.example.com/public_html; location / { index index.html index.htm index.php; } location ~ \.php$ { include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } } I've created the system link to the file in the /etc/nginx/sites-enabled/ directory and restarted/reloaded nginx. DNS seems fine: # ping -c 2 subdomain PING subdomain.example.com (xxx.xxx.xx.xxx) 56(84) bytes of data. 64 bytes from www.example.com (xxx.xxx.xx.xxx): icmp_req=1 ttl=64 time=0.035 ms 64 bytes from www.example.com (xxx.xxx.xx.xxx): icmp_req=2 ttl=64 time=0.048 ms Checking the file with cURL works: # curl http://subdomain.example.com HTML - OK Emptied browser cache but still no dice. Anything I'm missing? Like I mentioned, I have a few sites running fine on the server currently so php-fpm etc etc are working. Any help would be much appreciated! Cheers, Dave

  Read the article

• Nginx server 301 Moved permanently

  - by user145714

  When I did a curl -v http://site-wordpress.com:81 I received this result: About to connect() to site-wordpress.com port 81 (#0) Trying ip... connected Connected to site-wordpress.com (ip) port 81 (#0) GET / HTTP/1.1 User-Agent: curl/7.19.7 (x86_64-unknown-linux-gnu) libcurl/7.19.7 NSS/3.12.6.2 zlib/1.2.3 libidn/1.18 libssh2/1.2.2 Host: site-wordpress.com:81 Accept: / < HTTP/1.1 301 Moved Permanently < Server: nginx/1.2.4 < Date: Fri, 16 Nov 2012 16:28:19 GMT < Content-Type: text/html; charset=UTF-8 < Transfer-Encoding: chunked < Connection: keep-alive < X-Pingback: The URL above/xmlrpc.php < Location: The URL above Seems like this line in my fastcgi_params is causing grief. fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; If I remove this line , I get HTTP/1.1 200 OK but I get a blank page. This is my config: server { listen 81; server_name site-wordpress.com; root /var/www/html/site; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; index index.php; if (!-e $request_filename){ rewrite ^(.*)$ /index.php break; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; # port where FastCGI processes were spawned fastcgi_index index.php; include /etc/nginx/fastcgi_params; include /etc/nginx/mime.types; } location ~ \.css { add_header Content-Type text/css; } location ~ \.js { add_header Content-Type application/x-javascript; } } This config works with ip and port 80. But now I need to use a domain name and port 81, which doesn't work. Could someone please help. Thanks.

  Read the article

• How can I automatically edit an email before auto-forwarding it?

  - by Miss Cellanie

  Is there a way to automatically edit emails before forwarding them? I'm getting email notifications from Foursquare that I want to send to my phone as text messages. I know how to send messages to my number using an email address (I'm in the US and use Verizon) but I don't know how to strip out any unnecessary formatting, like HTML, before the email gets sent. What I want: Ability to strip out HTML Ability to start forwarding at a specific part of the email based on a search (e.g., I might know that Foursquare starts their messages with "Hey hey!" and only want content after that phrase occurs) Ability to truncate at 160 characters Things I've tried: I'm not using Foursquare DM pings through Twitter because I have two Twitter accounts and Twitter only allows a phone to be linked to one account at a time. I'm not willing to change which account it's linked to. I tried to work around the Twitter limitation using Google Voice, but they don't support SMS short codes. I'll compromise on the features I want if I can find a free solution that doesn't require me to set up my own server. I do think this is computer related because it will happen on my computer, not on my phone. edit My current setup: Gmail in Firefox 3.0.15 on Windows XP. I use a netbook as my only personal computer. However, if the only way to accomplish this well is to set up my own mail server or something, I would still want to know that.

  Read the article

• How do I troubleshoot nginx not recognizing passenger?

  - by Jade

  Issue: nginx does not seem to recognize my rails application Symptoms: When the server starts up, it shows the "Welcome to nginx!" message instead of my Rails application. Nginx seems to be using the local nginx path instead of the Rails root I specified: 2010/04/18 06:29:06 [error] 783#0: *1 "/usr/local/nginx/html/blog/index.html" is not found (2: No such file or directory), client: 1.2.3.4, server: www.farmerjade.com, request: "GET /blog/ HTTP/1.1", host: "www.farmerjade.com" I used [RVM and Passenger Setup on NGINX][1] to install nginx and passenger on a virtual machine. Here is my nginx configuration: user farmerjade; worker_processes 1; ... http { include mime.types; default_type application/octet-stream; passenger_ruby /home/farmerjade/.rvm/bin/passenger_ruby; passenger_root /home/farmerjade/.rvm/gems/ree-1.8.7-head/gems/passenger-2.2.11; ... server { listen 80; server_name www.farmerjade.com; root /home/farmerjade/farmerjade/public; passenger_enabled on; rails_env development; ... I'd appreciate any help anyone has to offer -- I'm quite new to nginx.

  Read the article

• LighTPD and PHP not working if outside of LightTPD folder

  - by Marco83

  I need to set up a simple web server with PHP on Windows XP that a number of different people will use for local testing. I'm using LightTPD 1.4.30-4-IPv6-Win32-SSL and PHP 5.2. So far I've created this folder structure: tools/ LightTPD/ htdocs/ PHP/ I set up PHP as CGI and the document root as server_root + "/htdocs". It works fine (well, it's slow but I don't want to bother with FastCGI for now :) ). My problem is when I try to put the htdocs outside of LightTPD folder, like this: htdocs/ tools/ LightTPD/ PHP/ I update the document root to server_root + "/../../htdocs" and while static HTML pages work fine, PHP pages stop working (they return a "No input file specified"). I literally just change the document root, I didn't change anything in the php.ini or anywhere else. Please also note that I left all doc_root, user_dir and cgi.force_redirect to the default values in php.ini, and it works when htdocs is inside LightTPD, but not when I move it ouside. Any idea of why it's breaking?? Here's my lightTPD.conf: server.modules = ( "mod_access", "mod_accesslog", "mod_alias", "mod_cgi", "mod_status", ) include "variables.conf" include "mimetype.conf" # THIS WORKS server.document-root = server_root + "/htdocs" # THIS DOESN'T #server.document-root = server_root + "/../../htdocs" server.upload-dirs = ( temp_dir ) index-file.names = ( "index.php", "index.pl", "index.cgi", "index.cml", "index.html", "index.htm", "default.htm" ) server.event-handler = "libev" url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } static-file.exclude-extensions = ( ".php", ".pl", ".cgi" ) server.errorlog = server_root + "/logs/error.log" ######### Options that are good to be but not neccesary to be changed ####### dir-listing.activate = "enable" #### CGI module cgi.assign = ( ".php" => server_root + "/../PHP/php-cgi.exe" ) status.status-url = "/server-status" status.config-url = "/server-config"

  Read the article

• Serving images from another hostname vs Apache overload for the rewrites

  - by luison

  We are trying to improve further the speed of some sites with older HTML in order as well to obtain better SEO results. We have now applied some minify measures, combined html, css etc. We use a small virtualized infrastructure and we've always wanted to use a light + standar http server configuration so the first one can serve images and static contents vs the other one php, rewrites, etc. We can easily do that now with a VM using the same files and conf of vhosts (bind mounts) on apache but with hardly any modules loaded. This means the light httpd will have smaller fingerprint that would allow us to serve more and quicker, have more minSpareServer running, etc. So, as browsers benefit from loading static content from different hostnames as well, we've thought about building a rewrite rule on our main server (main.com) to "redirect" all images and css *.jpg, *.gif, *.css etc to the same at say cdn.main.com thus the browser being able to have more connections. The question is, assuming we have a very complex rewrite ruleset already (we manually manipulate many old URLs for SEO) will it be worth? I mean will the additional load of main's apache to have to redirect main.com/image.jpg (I understand we'll have to do a 301) to cdn.main.com/image.jpg + then cdn.main.com having to serve it, be larger than the gain we would be archiving on the browser? Could the excess of 301s of all images on a page be penalized by google? How do large companies work this out, does the original code already include images linked from the cdn with absolute paths?

  Read the article

• nginx virtual hosts are not working, all vhosts goes to the default one

  - by Adirael

  Hello, I just did a clean install of nginx + php-fpm on a VPS running Ubuntu 10.10, nginx is serving and PHP is working fine, but I'm not able to add vhosts to it. Well, I can add them, but only one works, the rest go to this first one. This is my first vhost, for host1: server { listen 80; server_name host1; access_log /var/log/nginx/host1.log; error_log /var/log/nginx/host1.error.log; location / { root /var/www/vhosts/host1/; index index.html index.htm index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_param SCRIPT_FILENAME /var/www/vhosts/host1/$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_index index.php; } } And the second one, for host2: server { listen 80; server_name host2; access_log /var/log/nginx/host2.log; error_log /var/log/nginx/host2.error.log; location / { root /var/www/vhosts/host2/; index index.html index.htm index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_param SCRIPT_FILENAME /var/www/vhosts/host2/$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_index index.php; } } The problem is, when I go to http://host1 everything is fine, but on http://host2, it just shows host1! I don't have Apache installed and everything comes from repos. Any pointers?

  Read the article

• Apache LDAP with local groups

  - by Greg Ogle

  I have a server that currently uses htpasswd to authenticate users. I'm migrating to using LDAP, but my LDAP server is only for user authentication, not allowing me to add groups. I still need to use groups as they are used for access control via the Apache Directory tags in my configuration. The alternative is to revisit the access control altogether, using php or something of the sort to limit access. this works for 'basic' authentication <Directory /misc/www/html/site> #LDAP & other config stuff irrelevant to issue Require ldap-group cn=<service>,ou=Groups,dc=<service>,dc=<org>,dc=com </Directory> attempted <Directory /misc/www/html/site> #LDAP & other config stuff irrelevant to issue #groups file from previous configuration using htpasswd #tried to tweak to match new user format, but I don't think it looks up in here AuthGroupFile /misc/www/htpasswd/groups #added the group, which is how it works when using htpasswd Require ldap-group cn=<service>,ou=Groups,dc=<service>,dc=<org>,dc=com group xyz </Directory>

  Read the article

• 404 not found error for virtual host

  - by qubit

  Hello, In my /etc/apache2/sites-enabled, i have a file site2.com.conf, which defines a virtual host as follows : <VirtualHost *:80> ServerAdmin hostmaster@wharfage ServerName site2.com ServerAlias www.site2.com site2.com DirectoryIndex index.html index.htm index.php DocumentRoot /var/www LogLevel debug ErrorLog /var/log/apache2/site2_error.log CustomLog /var/log/apache2/site2_access.log combined ServerSignature Off <Location /> Options -Indexes </Location> Alias /favicon.ico /srv/site2/static/favicon.ico Alias /static /srv/site2/static # Alias /media /usr/local/lib/python2.5/site-packages/django/contrib/admin/media Alias /admin/media /var/lib/python-support/python2.5/django/contrib/admin/media WSGIScriptAlias / /srv/site2/wsgi/django.wsgi WSGIDaemonProcess site2 user=samj group=samj processes=1 threads=10 WSGIProcessGroup site2 </VirtualHost> I do the following to enable the site : 1) In /etc/apache2/sites-enabled, i run the command a2ensite site2.com.conf 2) I then get a message site successfully enabled, and then i run the command /etc/init.d/apache2 reload. But, if i navigate to www.site2.com, i get 404 not found. I do have an index.html in /var/www (permissions:777 and ownership www-data:www-data), and i have also verified that a symlink was created for site2.com.conf in /etc/apache2/sites-enabled. Any way to fix this ? Thank you.

  Read the article

< Previous Page | 653 654 655 656 657 658 659 660 661 662 663 664  | Next Page >