Search Results

Search found 18766 results on 751 pages for 'me again'.

Page 657/751 | < Previous Page | 653 654 655 656 657 658 659 660 661 662 663 664  | Next Page >

• Hard freeze on new computer

  - by mphair

  OCZ Gold 3x2GB 240-Pin DDR3 SDRAM PC312800 Palit NE5T240SFHD01 GeForce GT240 1GB 128-bit GDDR5 ASUS P7P55D-E LGA 1156 P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor SAMSUNG 22X Optical drive (DVD+-R/RW) CORSAIR CMPSU-620HX 620W ATX12V V2.2 Windows 7 Ultimate x64 Brand new system (got it from newegg two days ago) and it booted up and installed windows and ran for a day just fine. Yesterday, I boot it up in the afternoon and run various games at full graphics for most of the day. I turn on WoW and play for a few hours and it hard stalls. No numlock switching, no mouse feedback but nothing going wrong on the screen. No BSOD. I wait a bit to see if the stall is just a temporary one, but then force shutdown the computer. Upon reboot, everything seems fine, windows sees that it didn't shut down properly but I go into normal boot and restart WoW. I'm able to load it up and start running around when it freezes again. This time when I restart, it doesn't even get to BIOS. It starts (power goes on) and it just hangs with no output to the monitors. I shut it off and went to bed. This morning, I turned it on and went into BIOS setup. I'm not terribly experienced with messing with BIOS settings but I checked over them the best I could. Everything seems fine so I boot into windows and browse the internet for a bit looking for a solution, hard freeze within 10 minutes. I restart and go into BIOS and check the CPU temperature, 40c. I'm kinda stumped here. Some people say it might be a memory issue, but why would it take so long for it to come up? Could it have been slowly accessing one memory stick at a time and then it just got to a bad one and that's what is causing it to fail? It seems odd that I don't get a BSOD from a hardware failure. Having the screen just halt with no input or output change seems like a software thing to me. Any thoughts?

  Read the article

• Ubuntu Lucid: Erratic screen behaviour after boot

  - by fgysin

  In short: about 50% of the time I have a screwed up monitor setup after reboot. About 50% it is totally correct. Now the longer version: I updated my machine from 9.04 to 10.04 (via 9.10). At first I run into some monitor problems (I have a 3-monitor setup) because of the known bug in the new xserver driver for xinerama. This messes up behaviour if the mouse goes either left or above the screen number 0, i.e. I had to make my left-most monitor screen 0. Everything worked out fine finally, I got my 3-monitor setup back with xinerama enabled to get one big desktop streched over 3 screens. Now the fun part: Every time I start up my machine only one of the 3 monitors gets a signal and is woken up: it only recognizes the left-most monitor (screen 0) and crams all the desktop stuff into this one screen. If I go into nvidia settings I only see one physical device although all 3 are connected and have power. When I look into the xorg.conf I can still see my old setup with 3 devices, 3 screens, xinerama active etc... But I was totally unable to get 3 montitors to work. (I tried unplugging monitors, reconfiguring whole nvidia setup, ...) But it gets even better: When I restart my machine (i.e. choose the restart option from the Ubuntu menu) it shuts down and tries to restart. The restart then gets stuck after showing the Ubuntu splash screen with the 'loading bar' (the moving dots thingy) and I am forced to kill the machine by cutting power. But after the power cut the machine boots up normally and suddenly I get my 3 monitor setup back up working. That is until the next time I shut down and start up, where it all starts over again and I only have one monitor... (see above) I really have a hard time seeing where the error is. It must be that the restart boot somehow differs from the 'normal' boot. But the fact that it gets stuck and I need to cut power which then basically triggers a 'normal' boot does not really support this theory... My setup (please tell me if you need further info): 3 monitors as 3 screens as one desktop (with xinerama) 2 nvidia cards where screen 0 and 1 are on card 0 and screen 2 is on card 1 Ubuntu 10.04 Lucid Lynx (updated from 9.10, 9.04, ....) I would appreciate every idea on the subject, at the moment I really don't have any clue what to do...

  Read the article

• EMC/Legato/Networker Failed to recover files : Cross Platform Recovery not supported.

  - by marc.riera

  Software used to backup: EMC / Legato Networker legato server : windows legato clients: same hardware (2 years ago fedora something , now ubuntu ) Trying to recover from an old client, which is no longer available. So this is the thing. On 07/20/2008 we backed up a samba server(fedora something) to a tape , setting 1 year as browse policy and retention policy. Now this tape is recyclable. We took down the dns name. We deleted the legato client configuration. That legato client was reinstalled and is doing other stuff on ubuntu 10.04, with a different name but same ip. Now, 2 years and some month later #### Now we need to recover a folder from 2008 backup, on the fedora-samba-server. First thing, legato does not show the client name because the config was deleted. We create it again. We just set the old dns back on track, pointing the same ip, where the old server was, same MAC address ;). We created a new 'old client configuration' pointing to the new server. (different legato ip for client "I suppose" ) The ssid where the needed folder is on 2 tapes, 20 and 22. The index for that backup is on tape 21. We put this tapes on the jukebox (IBMT4000) -- not important for the issue -- All three tapes expired its browsable and recoverable time. So they are on recyclable. We get the clone id from the ssid with following command: mminfo -avot -q "ssid=<ssid>" -r cloneid We set the tapes to notrecyclable nsrmm -S <ssid>/<cloneid> -o notrecyclable We change the retention for the tapes for a future date nsrmm -S <ssid> -e 01/20/2011 We check the dates are correct : mminf -avV -q "ssid=<ssid>" -r ssbrowse(26),ssretent(26),savetime So far its OK. We close the terminal. Restart the server, just for being sure. Finally, we recover the index for that ssid where the folder should be. nsrck -L7 -t "07/20/2008" oldservername.domain.org There, we open the Networker User, select the server, select the old client as source, select the new client as destination. And this is what I get. imgur image of output -- http://i.imgur.com/1nOr8.png Should I understand that I need to install whatsoever operating system that was running on the old "linux server"/"networker client" to be able to restore 26Mb of files? thanks

  Read the article

• Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

  - by user46055

  Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

  Read the article

• Routing all data through an VPN tunnel with ppp

  - by Oliver

  I'm trying to create a VPN tunnel that forwards all data from the local machine to the VPN server. I'm using ppp-2.4.5 for this with the following configuration: pty "pptp <VPNServer> --nolaunchpppd" name <my login name> remotename PPTP usepeerdns require-mppe-128 file /etc/ppp/options.pptp persist maxfail 0 holdoff 5 I have a script in if-up.d with the following content: route del default eth0 route add default dev ppp0 Before starting the VPN tunnel my routing looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 2 0 0 eth0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 After starting the tunnel (via pon) it looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 12.34.56.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 Now the problem is, that the VPN tunnel seems to be looped into itself. If I run ifconfig after a few seconds without any traffic: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.10 netmask 255.255.0.0 broadcast 192.168.255.255 ether 00:01:2e:2f:ff:35 txqueuelen 1000 (Ethernet) RX packets 39931 bytes 6784614 (6.4 MiB) RX errors 0 dropped 90 overruns 0 frame 0 TX packets 34980 bytes 7633181 (7.2 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xfbdc0000-fbde0000 ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1496 inet 12.34.56.78 netmask 255.255.255.255 destination 12.34.56.1 ppp txqueuelen 3 (Point-to-Point Protocol) RX packets 7 bytes 94 (94.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 782863 bytes 349257986 (333.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 It states that already over 300 MiB have been send, ppp0 is only online since a few seconds and the connection isn't working anyway. Can someone please help me to fix the routing table, so that the traffic from ppp0 is not send again through ppp0 but instead goes to the remote server?

  Read the article

• Exchange 2010 Internal Auto Discover Migrate away from current .local DNS name

  - by Bryan

  We have an Exchange 2010 Server, running within our Active Directory domain, with an internal hostname of server.example.local. The server is configured for Exchange anywhere, but currently has a self signed certificate with a name of server.example.local installed. Internally, clients connect and work fine, but externally, we are having certificate errors as you would expect. I'm about to purchase a UCC SSL Certificate to install on the server with all the relevant SANs on the certificate to correct this, but due to obvious problem obtaining a trusted cert with .local as a subject alternative name, I'm looking to configure clients on the internal network so that they don't use any reference to the .local hostname. I've configured our external DNS name for the server as exchange.example.com, and have created an CNAME for autodiscover.example.com which also (correctly) points to exchange.example.com. I've also configured internal DNS records for these two hostnames which point to the internal interface of the same server. I don't anticipate any problems here. I'm now trying to reconfigure Auto Discover internally, so that Outlook attempts to connect to exchange.example.com. I've followed the steps in KB940726 to prepare for this, and this appeared to work fine. No errors were generated and I was able to verify the CAS name in AD using ADSI edit. I've just tried testing this with a newly created test user account complete with a new Exchange mailbox, and Outlook 2007 connects fine on the internal network, but looking deeper in the Exchange profile, Outlook is still resolving the server name as server.example.local. Could it be the self signed cert, that is causing Outlook to display the server name as server.example.local, or is there still something wrong with my internal autodiscover configuration? Edit I've proven it isn't the certificate that is responsible for outlook returning server.example.local, by installing another self certified certificate with a name of test.example.com. When creating a new outlook profile, I get the mismatch error I'm expceting, but after accepting the cert, and finishing the config of the Outlook profile, again it still shows server.example.local as the server name. This means that if I were to purchase the UCC cert now, that external client would work fine, but internal clients would show a certificate name mismatch. Any ideas where to start diagnosing this?

  Read the article

• logrotate isn't rotating a particular log file (and i think it should be)

  - by Max Williams

  Hi all. For a particular app, i have log files in two places. One of the places has just one log file that i want to use with logrotate, for the other location i want to use logrotate on all log files in that folder. I've set up an entry called millionaire-staging in /etc/logrotate.d and have been testing it by calling logrotate -f millionaire-staging. Here's my entry: #/etc/logrotate.d/millionaire-staging compress rotate 1000 dateext missingok sharedscripts copytruncate /var/www/apps/test.millionaire/log/staging.log { weekly } /var/www/apps/test.millionaire/shared/log/*log { size 40M } So, for the first folder, i want to rotate weekly (this seems to have worked fine). For the other, i want to rotate only when the log files get bigger than 40 meg. When i look in that folder (using the same locator as in the logrotate config), i can see a file in there that's 54M and which hasn't been rotated: $ ls -lh /var/www/apps/test.millionaire/shared/log/*log -rw-r--r-- 1 www-data root 33M 2010-12-29 15:00 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.access-log -rw-r--r-- 1 www-data root 54M 2010-09-10 16:57 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.debug-log -rw-r--r-- 1 www-data root 53K 2010-12-14 15:48 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.error-log -rw-r--r-- 1 www-data root 3.8M 2010-12-29 14:30 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.ssl.access-log -rw-r--r-- 1 www-data root 16K 2010-12-17 15:00 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.ssl.error-log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 /var/www/apps/test.millionaire/shared/log/unicorn.stderr.log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 /var/www/apps/test.millionaire/shared/log/unicorn.stdout.log Some of the other log files in that folder have been rotated though: $ ls -lh /var/www/apps/test.millionaire/shared/log total 91M -rw-r--r-- 1 www-data root 33M 2010-12-29 15:05 test.millionaire.charanga.com.access-log -rw-r--r-- 1 www-data root 54M 2010-09-10 16:57 test.millionaire.charanga.com.debug-log -rw-r--r-- 1 www-data root 53K 2010-12-14 15:48 test.millionaire.charanga.com.error-log -rw-r--r-- 1 www-data root 3.8M 2010-12-29 14:30 test.millionaire.charanga.com.ssl.access-log -rw-r--r-- 1 www-data root 16K 2010-12-17 15:00 test.millionaire.charanga.com.ssl.error-log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 unicorn.stderr.log -rw-r--r-- 1 deploy deploy 41K 2010-12-29 11:03 unicorn.stderr.log-20101229.gz -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 unicorn.stdout.log -rw-r--r-- 1 deploy deploy 1.1K 2010-10-15 11:05 unicorn.stdout.log-20101229.gz I think what might have happened is that i first ran this config with a pattern matching *.log, and that means it only rotated the two files that ended in .log (as opposed to -log). Then, when i changed the config and ran it again, it won't do any more since it think's its already had its weekly run, or something. Can anyone see what i'm doing wrong? Is it to do with those top folders being owned by root rather than deploy do you think? thanks, max

  Read the article

• logrotate isn't rotating a particular log file (and i think it should be)

  - by Max Williams

  Hi all. For a particular app, i have log files in two places. One of the places has just one log file that i want to use with logrotate, for the other location i want to use logrotate on all log files in that folder. I've set up an entry called millionaire-staging in /etc/logrotate.d and have been testing it by calling logrotate -f millionaire-staging. Here's my entry: #/etc/logrotate.d/millionaire-staging compress rotate 1000 dateext missingok sharedscripts copytruncate /var/www/apps/test.millionaire/log/staging.log { weekly } /var/www/apps/test.millionaire/shared/log/*log { size 40M } So, for the first folder, i want to rotate weekly (this seems to have worked fine). For the other, i want to rotate only when the log files get bigger than 40 meg. When i look in that folder (using the same locator as in the logrotate config), i can see a file in there that's 54M and which hasn't been rotated: $ ls -lh /var/www/apps/test.millionaire/shared/log/*log -rw-r--r-- 1 www-data root 33M 2010-12-29 15:00 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.access-log -rw-r--r-- 1 www-data root 54M 2010-09-10 16:57 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.debug-log -rw-r--r-- 1 www-data root 53K 2010-12-14 15:48 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.error-log -rw-r--r-- 1 www-data root 3.8M 2010-12-29 14:30 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.ssl.access-log -rw-r--r-- 1 www-data root 16K 2010-12-17 15:00 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.ssl.error-log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 /var/www/apps/test.millionaire/shared/log/unicorn.stderr.log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 /var/www/apps/test.millionaire/shared/log/unicorn.stdout.log Some of the other log files in that folder have been rotated though: $ ls -lh /var/www/apps/test.millionaire/shared/log total 91M -rw-r--r-- 1 www-data root 33M 2010-12-29 15:05 test.millionaire.charanga.com.access-log -rw-r--r-- 1 www-data root 54M 2010-09-10 16:57 test.millionaire.charanga.com.debug-log -rw-r--r-- 1 www-data root 53K 2010-12-14 15:48 test.millionaire.charanga.com.error-log -rw-r--r-- 1 www-data root 3.8M 2010-12-29 14:30 test.millionaire.charanga.com.ssl.access-log -rw-r--r-- 1 www-data root 16K 2010-12-17 15:00 test.millionaire.charanga.com.ssl.error-log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 unicorn.stderr.log -rw-r--r-- 1 deploy deploy 41K 2010-12-29 11:03 unicorn.stderr.log-20101229.gz -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 unicorn.stdout.log -rw-r--r-- 1 deploy deploy 1.1K 2010-10-15 11:05 unicorn.stdout.log-20101229.gz I think what might have happened is that i first ran this config with a pattern matching *.log, and that means it only rotated the two files that ended in .log (as opposed to -log). Then, when i changed the config and ran it again, it won't do any more since it think's its already had its weekly run, or something. Can anyone see what i'm doing wrong? Is it to do with those top folders being owned by root rather than deploy do you think? thanks, max

  Read the article

• Hot-swap drive got new name, can I change it on-the-fly?

  - by T.J. Crowder

  One of the HDDs in my server's RAID config failed, so I took it out of the array and had the data center hot-swap it. They've done that, but now the new drive is /dev/sdc rather than /dev/sda. I suspect — correct me if I'm wrong — that if I reboot the server, it will be /dev/sda again, so I'm hesitant to add it back to the array as /dev/sdc because I don't want to lay a trap for myself to fall into on the next reboot. I'd just as soon not reboot the server if I don't need to (if I do need to, well, too bad for me). Is there a way I can change the device name from /dev/sdc to /dev/sda without rebooting? This is on Ubuntu 10.04 LTS. It's an md array ("Linux Software RAID"), where currently one of the devices (there are a couple of them) looks like this ("degraded" because I've removed the old /dev/sda from it): # mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Sun Oct 11 21:07:54 2009 Raid Level : raid1 Array Size : 97536 (95.27 MiB 99.88 MB) Used Dev Size : 97536 (95.27 MiB 99.88 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Jun 30 09:31:16 2011 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 UUID : 496be7a5:ab9177ed:7792c71e:7dc17aa4 Events : 0.112 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed Thanks, Update: Reading through the kernel md documentation, I suspect that if the name changes on reboot, it won't matter. (Good design, that.) Here's why: Boot time autodetection of RAID arrays When md is compiled into the kernel (not as module), partitions of type 0xfd are scanned and automatically assembled into RAID arrays. This autodetection may be suppressed with the kernel parameter "raid=noautodetect". As of kernel 2.6.9, only drives with a type 0 superblock can be autodetected and run at boot time. The kernel parameter "raid=partitionable" (or "raid=part") means that all auto-detected arrays are assembled as partitionable. I do have md compiled into the kernel, so I'm rebuilding the array now and will do the reboot to see what happens. Even if it works, the above doesn't answer the question I actually asked, so unless someone comes along and answers that question in the meantime (I'd be interested, even if it's not necessary for what I'm doing this very moment), I'll just delete the question to keep noise down.

  Read the article

• Apache server completely freezes until it gets restarted

  - by nbv4

  My server does this every few days. What sucks is that it always seems to do this right after I go to bed, so when I wake up, I'm greeted with the fact that my server has been down for the past 6 or 7 hours. When I first noticed this, I added a cronjob that tries to restart the server every 15 minutes, but I guess that didn't fix it. Once I noticed the server was down, I can this command: /etc/init.d/apache2 restart * Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName ... waiting ...........................................................apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName httpd (pid 17597) already running ...which is odd, because a restart should restart the server, even if it's already running, correct? I eventually had to "stop" then "start" to get it working again. I then looked through the logs, and found something very weird. It seems that around the time the server crashed, the logs have entries that are wildly out of order. It looks a little like this: xx.xxx.xxx.x - - [21/Apr/2010:06:32:05 -0400] "GET / blah" xx.xxx.xxx.x - - [21/Apr/2010:06:51:25 -0400] "GET / blah" x.xx.xxx.xxx - - [21/Apr/2010:06:38:23 -0400] "GET / blah" xxx.xx.xx.xx - - [21/Apr/2010:06:31:56 -0400] "GET / blah" xxx.xx.xx.xx - - [21/Apr/2010:06:51:49 -0400] "GET / blah" xx.xx.xxx.xx - - [21/Apr/2010:06:33:20 -0400] "GET / blah" I don't think the problem is memory, because this: tells me that right before the crash, memory usage is fine. I'm running apache with the worker mpm, here are the settings for that: <IfModule mpm_worker_module> StartServers 1 MaxClients 100 MinSpareThreads 5 MaxSpareThreads 10 ThreadsPerChild 10 MaxRequestsPerChild 3000 </IfModule> This apache server is running a bunch of stuff, but most of the traffic comes from a django project I'm hosting, that uses mod_wsgi. There also is a simple machines forum that is running off of mod_fcgid. Those setting are below: <IfModule mod_fcgid.c> MaxRequestsPerProcess 500 MaxProcessCount 3 AddHandler fcgid-script .php .fcgi AddHandler cgi-script .cgi .pl FCGIWrapper "/usr/bin/php-cgi" .php </IfModule> Anyone know of anything else I can check? I've just about tweaked every single setting I can think of, yet these freezes still happen.

  Read the article

• Suspected network performance issue on VirtualBox Ubuntu guest on Win7 host

  - by Adam

  I set up Ubuntu 12.04 in VirtualBox on the Win7 machine I was allocated on my new project. I am running Java, Eclipse, Tomcat to develop a large data-intensive application and I noticed that this application runs at half the speed of my colleague's identical machine, where he runs it all under Windows. I think I have narrowed down the performance issue to the network, after comparing and equalising all the Java VM settings with my colleague. Is there a ping test I can do or some other network diagnostic test to flag up any problems? To give some background, the network performance is confusing. Running a network speed test to my colleague's machine with iperf shows speeds of 6 Mb/s from my Ubuntu guest, and 90 Mb/s from the win7 host. Large downloads, e.g. the Java SDK, come down at about 1.2 MB/s on both the guest and the host. Pings are sub-1ms on the host, but 1.5ms on the guest. I also did a broadband speed test, and got 10Mb/s download speed on both, but the host has an upload speed of 10Mb/s but the guest only uploads at 3Mb/s. I've been trying to diagnose any MTU problems with ping -M do to identify any kind of packet fragmentation problem but it's progressing very slow because I don't have much experience in this area. From what I read on other people's networking issues with VB and Linux guests on Win7 hosts, I should be able to get the speed on the guest up to the same level as the host. I installed a fresh VM with Ubuntu again to see if I'd foobar'd it somehow, but I'm getting the same readings with iperf on the virgin installation. My setup is: Adapter 1: Intel PRO/1000 MT Desktop (NAT) Adapter 2: ditto (host-only adapter) eth0 Link encap:Ethernet HWaddr 08:00:27:0b:76:bf inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe0b:76bf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:86236 errors:0 dropped:0 overruns:0 frame:0 TX packets:49369 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:69163946 (69.1 MB) TX bytes:3530535 (3.5 MB) eth2 Link encap:Ethernet HWaddr 08:00:27:a3:26:b8 inet addr:192.168.56.101 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fea3:26b8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:59 errors:0 dropped:0 overruns:0 frame:0 TX packets:57 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9148 (9.1 KB) TX bytes:7648 (7.6 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:701 errors:0 dropped:0 overruns:0 frame:0 TX packets:701 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:66321 (66.3 KB) TX bytes:66321 (66.3 KB)

  Read the article

• Windows server detected error with hard disk

  - by user53864

  We have hosting Windows server 2008 R2 and I am working as admin in small company. The server is hanging and restarting as the hard disk seems to be damaged due to power fluctutaion(though having inverter) as it's showing the below error message on server reboot: Problem detected with the hard disk Press any key to continue It's Seagate 1TB SATA hard disk and it's booting after pressing enter. So it's clear that the hard disk is dying. Yes, it's in warranty but it's fact that warranty won't recover the lincesed windows server 2008 and it's data. As it's booting now, I backed up required things and I am thinking to clone the entire hard disk. The first thing it striked me is checking on the Seagate site if any tool available for cloning and I found Seagate DiskWizard but not specified it for windows server 2008. Please anybody could help me giving your best ideas for the below: Urgently, What's the best way(free of cost) for me to clone in my case with the new same sized hard disk? It's a one time lincenced and I cannot use the same key again if I reinstall the server. Will the lincense be carried with new disk if cloned? else there is a way to contact Microsoft explaining the problem occurred, to obtain new key for no charge?. I want to take measure for future. How do I keep two disks in continuous sync? mirrored & raid are the only options converting the disks to dynamic? or is there a best way I could do with no additional charge?. Any help is greatly appreciated. Thank you! EDIT:1 I started cloning the disk with CloneZilla and it was going proper showing in GUI. But after some time there is no GUI but a black screen with some codes(looks like disk location numbers) going page by page(I have attached the screenshots below captured from my phone). Do you people think it's actually cloning?. I started in the morning and it's evening now. I left the office now to let it finish what it's trying to do and I'll go & check it tomorrow. Slowly lost hope, don't know what face it's going to show tomorrow. Any ideas?

  Read the article

• Looking for Fiddler2 help. connection to gateway refused...just got rid of a virus?

  - by john mackey

  I use Fiddler2 for facebook game items, and it's been a great success. I accessed a website to download some dat files I needed. I think it was eshare, ziddu or megaupload, one of those. Anyway, even before the rar file had downloaded, I got this weird green shield in the bottom right hand corner of my computer. It said a Trojan was trying to access my computer, or something to that extent. It prompted me to click the shield to begin anti-virus scanning. It turns out this rogue program is called Antivirus System Pro and is pretty hard to get rid of. After discovering the rogue program, I tried using Fiddler and got the following error: [Fiddler] Connection to Gateway failed. Exception Text: No connection could be made because the target machine actively refused it 127.0.0.1:5555 I ended up purchasing SpyDoctor + Antivirus, which I'm told is designed specifically for getting rid of these types of programs. Anyway, I did a quick-scan last night with spydoctor and malware bytes. Malware picked up 2 files, and Spydoctor found 4. Most were insignificant, but it did find a worm called Worm.Alcra.F, which was labeled high-priority. I don’t know if that’s the Anti-Virus Pro or not, but SpyDoctor said it got rid of all of those successfully. I tried to run Fiddler again before leaving home, but was still getting the "gateway failed" error. Im using the newest version of firefox. When I initially set up the Fiddler 2.2.8.6, I couldn’t get it to run at first, so I found this faq on the internet that said I needed to go through ToolsOptionsSettings and set up an HTTP Proxy to 127.0.0.1 and my Port to 8888. Once I set that up and downloaded this fiddler helper as a firefox add-on, it worked fine. When I turn on fiddler, it automatically takes my proxy setting from no proxy (default) to the 127.0.0.1 with Port 8888 set up. It worked fine until my computer detected this virus. Anyway, hopefully I've given you sufficient information to offer me your best advice here. Like I said, Spydoctor says the bad stuff is gone, so maybe the rogue program made some type of change in my fiddler that I could just reset or uncheck or something like that? Or will I need to completely remove fiddler and those dat files and rar files I downloaded? Any help would be greatly appreciated. Thanks for your time.

  Read the article

• How to Configure Source NAT (Private IP => Public IP Outbound)

  - by DavidScherer

  I'm running VMWare ESXi Free and have Zentyal SBS 3.2 running as a Gateway. I have 5 Public IPS (CIDR/29, let's call them 69.1.1.1 - 69.1.1.5) and currently Zentyal is bound to 69.1.1.1 as the Gateway, with the other 4 Public IPs set as Virtual Interfaces in Zentyal (wan2-wan5) I have machines sitting on the Private Network (10.34.251.x) that, when going Outbound (to Google for instance) should be seen by the Internet as an IP other than the Gateway (69.1.1.1), this is because our machines need to be able to communicate with 3rd party APIs that expect these requests to come from a specific IP. From what I could find, SNAT (Source NAT) in Zentyal is used to achieve this, but I'm not sure how to configure it and cannot find a specific piece of Documentation for it at Zentyal. I've tried setting this up a couple different ways, with no results and at this point I have no idea if I'm going about this completely wrong, or my lack of experience with networking and the associated terminology is preventing me from placing the correct values in the correct fields. I get the following form to set up "SNAT" rules in Zentyal: Perhaps someone can offer some guidance and definitions for the fields above? SNAT Address Is this the Public IP I want to masquerade? Outgoing Interface Should this by my External NIC (one connected to Public 'Net), or is it the "Private" interface? It sounds as though this should be the External interface as I want the traffic from the internal network sent Out over this Interface (using a different IP than normal, anyway) Source Is the the Source on the internal network (one of the private IPs?), a public IP I want to masquerade as, or something else entirely? Destination Is this a place on the Internet (eg, "Only do this for the Site Google.com"/IP) or am I allowing myself to become confused again? Service I'm assuming this allows me to restrict which services this rule will apply to, but is it for a service on the internal network or a service being accessed on the external network? If I can offer any further details or information to make what I'm trying to do more clear, I will happily do so. Honestly any kind of help here would be very appreciated. I'm not a NetOps or anything even close, I spend most of my day writing code and my entire "team" at this company consists of "me, myself, and I" so while I try to broaden my KB at every possible opportunity, I can only learn so much, so fast and I feel like with networking especially there's just so much, coupled with a learning curve for each solution that likes to (from my limited perspective) use slightly different terminology that what I'm used to (and I don't exactly have the necessary experience to cross reference this stuff with the stuff I already know in context).

  Read the article

• Why won't IE let users login to a website unless in In Private mode?

  - by Richard Fawcett

  I'm not entirely sure this belongs on SuperUser.com. I also considered ServerFault.com and StackOverflow.com, but on balance, I think it should belong here? We host a website which has the same code responding to multiple domain names. On 28th December (without any changes deployed to the website) a percentage of users suddenly could not login, and the blank login page was just rendered again even when the correct credentials were entered. The issue is still ongoing. After remote controlling an affected user's PC, we've found the following: The issue affects Internet Explorer 9. The user can login from the same machine on Chrome. The user can login from an In Private browser session using IE9. The user can login if the website is added to the Trusted Sites security zone. The user can NOT login from an IE session in safe mode (started with iexplore -extoff). Only one hostname that the website responds to prevents login, the same user account on the other hostname works fine (note that this is identical code and database running server side), even though that site is not in trusted sites zone. Series of HTTP requests in the failure case: GET request to protected page, returns a 302 FOUND response to login page. GET request to login page. POST to login page, containing credentials, returns redirect to protected page. GET request to protected page... for some reason auth fails and browser is redirected to login page, as in step 1. Other information: Operating system is Windows 7 Ultimate Edition. AV system is AVG Internet Security 2012. I can think of lots of things that could be going wrong, but in every case, one of the findings above is incompatible with the theory. Any ideas what is causing login to fail? Update 06-Jan-2012 Enhanced logging has shown that the .ASPXAUTH cookie is being set in step 3. Its expiry date is 28 days in the future, its path is /, the domain is mysite.com, and its value is an encrypted forms ticket, as expected. However, the cookie is not being received by the web server during step 4. Other cookies are being presented to the server during step 4, it's just this one that is missing. I've seen that cookies are usually set with a domain starting with a period, but mine isn't. Should it be .mysite.com instead of mysite.com? However, if this was wrong, it would presumably affect all users?

  Read the article

• mac + parallels and https site test = router restarts

  - by Erik

  Ok I have an interesting & very frustrating problem happening. I'm going to explain it the best I can. I work as a graphic designer & web designer on a mac and have a Comcast internet connection that comes through a Comcast branded router (SMC8014) which then ties into an Airport Extreme Base Station which runs my office network. I run OS 10.5.7 and also run Parallels 4.0.3 (running Windows XP) for testing websites in Internet Explorer and so on. Ok, so that the basic background. Here's my issue. I've been collaborating an ecommerce website with another designer/developer and when testing the site on the PC side we have started to run into some sort of network problem. The site is https if that matters at all I suspect it may. Basically when I run parallels for testing I am constantly having to restart the router in order to connect to the test site (it's hosted). Funny thing is I can access the rest of the internet fine, just not this site I'm working on until I restart the router (It's sorta like the site is timing out). This never happens when just running the Mac side of things. It only becomes an issue when Parallels is open and I am doing page refreshes while making css or HTML edits via something like Coda or CSS edit (connected to the hosting server via ftp). The real problem is that once the problem starts I only get about 2 or 3 page loads before I have to restart the router again. It's absolutely crippling. I cannot get any work done when I have to restart the router every couple of minutes. So, if you think this problem is isolated to me, the answer is no. The designer/developer I'm collaborating with has an office a couple miles away and experiences very similar problems under slightly different setup. He also has Comcast as his internet provider and connects his router to an Airport and primarily works on a mac. The main difference is that rather than using a visualizer like parallels to test the website on the PC he uses a real live PC that is on his network. Once he fire up the PC to do testing he runs into the same issue described above. After a couple of page refreshes in Internet Explorer or other browser on the PC the site becomes unresponsive and the router has to get restarted. Any thoughts on what is going on here would be greatly appreciated. Thanks in advance.

  Read the article

• Bluetooth not detecting any devices in Windows 7

  - by underDog

  My Lenovo ThinkPad E320 Laptop running Windows 7 64bit has recently been refusing to detect any Bluetooth devices. I have tried to connect, using 'Add devices' under 'devices and printers' to two different Bluetooth mice and my HTC Wildfire android (2.2.1) phone and none of them are detected in the 'Add a device' dialog. History - Bluetooth initially seemed OK when I first got this laptop. I was able to connect to and use my android phone as a remote with no issues. I got my first Bluetooth mouse, it paired, but after each restart, or even after sleeping, it would not 're-connect' (even though it was listed under Bluetooth devices and supposedly 'working'), and I would need to remove the device and add it again. A week or two ago it stopped working all together. It is not detected at all. I gave up on the mouse and bought another (Lenovo ThinkPad brand) only to find that it was not detected either. I subsequently tested my Android phone and discovered it would not detect either. One thing of note is under 'Devices and Printers' there is listed a 'HID Keyboard Device' which under properties is listed as a 'Bluetooth HID Device'. This was not previously there before this problem started. Each time I remove it, or uninstall it from Device Manager it will quickly re-install itself, even with all my Bluetooth devices switched off. My (Google and searching this site) research of this issue has not yielded any definitive answers. I have changed the setting under Device Manager - Bluetooth - Properties - Power Management - 'Allow the computer to turn off this device to save power' to off. I have attempted to un-install and re-install the Bluetooth hardware, including the 'remove drivers' option and downloading and running the Lenovo Bluetooth installer package (found @ http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014997). Bluetooth is turned on. All items under Bluetooth properties (Discovery and Connections) are checked. I have tried changing the batteries. I'm not sure what else I can try, apart from perhaps doing a fresh install of Windows. Any suggestions?

  Read the article

• how to use iptables to block the IP of device connected to openwrt router

  - by scola

  I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

  Read the article

• Sharing folder in a Virtual Private Windows Server 2008 R2 ?

  - by Triztian

  See Edit 2: Hello all, seems my involvement with computers has grown and I've found my self in the need to access a shared folder on a server. I've read some documentation and managed to set up the folder as a share, for this I created a local group and for now just one local user that has access to the share, the folder is in the public user folder and it's permissions should be (and I believe they are) read/write. The problem is that I can't connect from a remote machine I mean I don't know how the way it should be accessed, the server has a public IP and we use it also as a host to our website I don't know if that affects it though, the folder will be used as the "keeper" for the QuickBooks company files and has the database server manager installed. I've tried setting up a VPN Connection to the but no success. The server has a domain name a "http://www.example.com" that redirects to our website, I am unsure if it could be accessed that way, also the share has a location displayed when I right-click properties Heres what I've tried Setting up a VPN Connection (Windows Vista and 7) Got to the point where I got asked for credential and entered the user I created (which is not an admin) but I got a "Connection fail error 800" I suppose this is because in the domain field I entered the servers workgroup. right-click add network connection (Windows 7) Went through the wizard until I reached the point of entering the location, tried many things, the name in the share's properties(\\SOMETHING\Share), the http://www.example.com , the IP address I'm quite unfamiliar with this, so I have my guesses: Since the group and user are local they do not have access to the folder. The firewall in the server is blocking my connection. Anyways, any help and guidence is truly appreciated. EDIT 1: As @tony roth pointed out it may be a security fail, an I commented it out to management and said that that is not an issue, so please bare with me. EDIT 2: I've found out that the real question could be streamlined to "Sharing folder in a Virtual Private Server?", as thats what we have, a virtual private windows server 2008 R2, and I would like to know how to make it show like a normal folder in the client computer. Thanks again for all of your support.

  Read the article

• My network drive disappears from Mac OS Finder

  - by Mariusz

  I have recently bought a Netgear WNDR3800 router to use it in my home network. But just the same day I installed it, I noticed a strange behaviour of Finder and iTunes. Let me explain it further. There is a Synology DS111 NAS attached to that router and two Macs with Mac OS X Lion. One of them is connected by a cable and the second one wirelessly. Before I changed my router to the new one I mentioned above, Finder always used to display my NAS on its sidebar. So I could just click its network name to access shared folders existing on it. But after I installed WNDR3800, I can no longer access the NAS that way. It is no longer displayed. I always have to mount it manually by typing its IP address using the Finder's 'connect to server' option. The same NAS supports TimeMachine backups and has an inbuilt DLNA server. And the same situation here. I can't perform a backup because my NAS is no longer accessible in TimeMachine preferences. iTunes does not display it as well (as a multimedia server) even though it used to before I installed that router. What's important, everything works fine for a couple of minutes after I restart the router or the NAS. Or even when I change the NAS's IP address it becomes accessible again in Finder, TimeMachine and iTunes, but only for some time. Both the Mac computers I mentioned behave the same way. And all those issues have been taking place sice I installed that new router. Before I did that, everything had worked fine. My old router was Netgear WGR614v10. Would you be so kind to tell me what you think could possibly be the reason of that behaviour? What settings of the router should I look closer at? I'm not a network specialist, but is it possible that some network packets are blocked for some reason? I will be grateful for any clues you give me. Thank you.

  Read the article

• Tool or script to detect moved or renamed files on Linux prior to a backup

  - by Pharaun

  Basically I am searching to see if there exists a tool or script that can detect moved or renamed files so that I can get a list of renamed/moved files and apply the same operation on the other end of the network to conserve on bandwidth. Basically disk storage is cheap but bandwidth isn't, and the problem is that the files often will be reorganized or moved around into a better directory structure thus when you use rsync to do the backup, rsync won't notice that its a renamed or moved file and re-transmission it over the network all over again despite having the same file on the other end. So I am wondering if there exists a script or tool that can record where all the files are and their names, then just prior to a backup, it would rescan and detect moved or renamed files, then I can take that list and re-apply the move/rename operation on the other side. Here's a list of the "general" features of the files: Large unchanging files They can be renamed or moved around [Edit:] These all are good answers, and what I end up doing in the end was looking at all of the answers and will be writing some code to deal with this. Basically what I am thinking/working on now is: Using something like AIDE for the "initial" scan and enable me to keep checksums on the files because they are supposed to never change, so it would aid on detecting corruption. Creating an inotify daemon that would monitor these files/directory and recording any changes relating to renames & moving the files around to a log file. There are some edge cases where inotify might fail to record that something happened to the file system, thus there is a final step of using find to search the file system for files that has a change time latter than the last backup. This has several benefits: Checksums/etc from AIDE to be able to check/make sure that some media did not get corrupt Inotify keeps resource usage low and no need to re-scan the filesystem over and over No need to patch rsync; If I have to patch things I can, but I would prefer to avoid patching things to keep the burden lower, (IE don't need to re-patch everytime there is an update). I've used Unison before and its really nice, however I could've sworn that Unison does keep copies around on the filesystem and that its "archive" files can grow to be rather large?

  Read the article

• DNS Issue Windows 2003 AD-The server holding the PDC role is down

  - by Dave M

  Our network of Windows 2003 and Windows 2008 servers suddenly hasDNS issues. There are 7 DCs. Two at our main office and one each at branch sites (one branch has two a 2008R2 and WIN2K3) Only two are WIN2008R2 Running DCDIAG on the WIN2K3 at main site (DC1) reports no issues. Running at any branch site reports two issues All other test pass. The server DC1 can be PINGed by name from any site Starting test: frsevent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. Starting test: FsmoCheck Warning: DcGetDcName(PDC_REQUIRED) call failed, error 1355 A Primary Domain Controller could not be located. The server holding the PDC role is down. Netdom.exe /query DC reports the expected servers. netdom query fsmo This reports the server at the main office holds the following roles: * Schema owner Domain role owner PDC role RID pool manager Infrastructure owner In the DNS management snap-in, DC1 appears as DNS server but does not appear in _msdcs-dc-_sites-Default-First-Site-Name-_TCP There is no _ldap or –kerberos record pointing to DC1 Same issue msdcs-dc-_sites- -_TCP Again there is no _ldap or –kerberos record pointing to DC1 Under Domain DNS Zones there is no entry for the server. This is the case for any _tcp folder in the DNS. The server DC1 appears correctly as a name server in the Reverse Lookup Zone. There is a Host(A) record for DC1 but in the Forward Lookup Zone there is no (same as parent folder) Host(A) for the DC1 server but such an entry exists for the other DCs at branch sites and the other DC at the main office. We have tried stopping and starting the netlogon service, restarting DNS and also dcdiag /fix. Netdiag reports error: Trust relationship test. . . . . . : Failed [FATAL] Secure channel to domain 'XXX' is broken. [ERROR_NO_LOGON_SERVERS] [WARNING] Failed to query SPN registration on DC- One entry for each branch DC All braches lsit the problem server and it can be Pinged by name from any branch Fixing is number one priority but also would like to determine the casue.

  Read the article

• In search of a good audio player for Ubuntu 9.10

  - by Joe Casadonte

  If this should be marked Community Wiki, please let me know. I'm switching from XP to Ubuntu, and I have been very disappointed with the selection of media players available. I'm primarily interested in an audio player, but integrated video and library management is OK, too. My criteria: Must be able to play audio CDs (I'm shocked how many apps this does away with, right away) Must be able to play MP3 & WAV; OGG, SHN, FLAC are all bonuses Repeat and Shuffle modes are a must FreeDB / GraceNote through a proxy is a must (if it can read a PAC file, that would be awesome) It needs to be really small, e.g. skinnable or an applet Ability to execute a playlist is a plus Gapless MP3 playback a plus I'm running Gnome, but I'm not totally adverse to a KDE app. Command-line only is also a viable option. Some that I've tried: RhythmBox - probably the best of the lot that I've tried; I don't like its mini mode (doesn't show the song being played) and I can't figure out how to get it to hit FreeDB/GraceNote through a proxy Songbird - can't play CDs, playlist management is atrocious Banshee Jajuk Maybe a couple of more. Thanks! UPDATE I tried out VLC, Amarok and Songbord (again). VLC I eventually got to work (I had some kind of bad configuration). It seemed way more involved than I was looking for out of a music player, and in general more geared to video than audio. I couldn't fathom its library management, which I think it has; maybe it doesn't, and that's why I couldn't figure it out. Amaork looked very promising but the library management was not to my liking, and the way it handled a playlist with both MP3 and WAV is inexplicable at best. I did like some aspects of the UI, but not enough to keep it. Songbird is very finicky, but I like the library management. Sort of. It kept telling me my Watch folder was invalid, even thought it clearly was accessible. Playlist management is bizarre, and the message that it was deleting source files whenever I deleted a playlist had me too worried to keep using it. Had it been able to play CDs, maybe I would have persevered. Audacious, while a bit odd at times, does seem to do what I want. If it had a library manager, I wouldn't have bothered trying any of the others. Thanks for the help, everyone!

  Read the article

• Nginx, proxy passing to Apache, and SSL

  - by Vic

  I have Nginx and Apache set up with Nginx proxy-passing everything to Apache except static resources. I have a server set up for port 80 like so: server { listen 80; server_name *.example1.com *.example2.com; [...] location ~* \.(?:ico|css|js|gif|jpe?g|png|pdf|te?xt)$ { access_log off; expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; add_header Vary: Accept-Encoding; } location / { proxy_pass http://127.0.0.1:8080; include /etc/nginx/conf.d/proxy.conf; } } And since we have multiple ssl sites (with different ssl certificates) I have a server{} block for each of them like so: server { listen 443 ssl; server_name *.example1.com; [...] location ~* \.(?:ico|css|js|gif|jpe?g|png|pdf|te?xt)$ { access_log off; expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; add_header Vary: Accept-Encoding; } location / { proxy_pass https://127.0.0.1:8443; include /etc/nginx/conf.d/proxy.conf; proxy_set_header X-Forwarded-Port 443; proxy_set_header X-Forwarded-Proto https; } } server { listen 443 ssl; server_name *.example2.com; [...] location ~* \.(?:ico|css|js|gif|jpe?g|png|pdf|te?xt)$ { access_log off; expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; add_header Vary: Accept-Encoding; } location / { proxy_pass https://127.0.0.1:8445; include /etc/nginx/conf.d/proxy.conf; proxy_set_header X-Forwarded-Port 443; proxy_set_header X-Forwarded-Proto https; } } First of all, I think there is a very obvious problem here, which is that I'm double-encrypting everything, first at the nginx level and then again by Apache. To make everything worse, I just started using Amazon's Elastic Load Balancer, so I added the certificate to the ELB and now SSL encryption is happening three times. That's gotta be horrible for performance. What is the sane way to handle this? Should I be forwarding https on the ELB - http on nginx - http on apache? Secondly, there is so much duplication above. Is the best method to not repeat myself to put all of the static asset handling in an include file and just include it in the server?

  Read the article

• Suggestions for splitting server roles amongst Hyper-V virtual servers / RAID6 or RAID10? / AppAssure

  - by Anon

  We have 2 Hyper-V hosts at present running 1 virtual server that was converted from a physical box running all roles. My plan is to split the roles over various virtual machines, upgrading to the latest software versions as I go, and use the backup server as a standby in case the main server fails. AppAssure backup software has a feature called Virtual Standby, so the VHD's can be ready to be fired up on the backup server if necessary. Off-site backups will be done via external USB drive for now. I'm just seeking some input/suggestions into how I'm planning to split the roles out amongst various virtual servers. Also, I'm curious how to setup the storage on the servers. We do not have any NAS's, SAN'S or any budget for this. What would the best RAID level be to use? I'm thinking either RAID6 (which is currently used) however I'm concerned about the write speeds, or RAID10 but again I'm worried that I can only lose 1 drive (from the same mirror) as opposed to any 2 with RAID6. I realise I have a hot swap for this, but what if a further drive fails during a rebuild? Is the write penalty of RAID6 worth the extra reliability over RAID10? Or will it be too slow with all the roles I am planning, therefore RAID10 is my only real option? The reason for the needed redundancy is I am the only technician and I'm not always on-site. Options I've considered: 1) 5 drives in RAID6 set, 200gb for host OS, rest for VM storage. 1 drive for hot swap - this is how it is currently setup 2) 4 drives in RAID10 set, 200gb for host OS, rest for VM storage. 2 drives for hot swap 3) 4 drives in RAID10 set for VM storage, 2 drives in RAID1 set for host OS. No drives for hot swap - While this is probably the best option with the amount of drives I have, I don't like the idea of having no hot swap 4) 3 drives in RAID6 set for VM storage, 2 drives in RAID1 set for host OS. 1 drive for hot swap All options give us enough storage capacity for our files, etc. We don't have any budget for extra drives or extra hot swap HD chassis for the servers. We have about 70 clients and about 150 users. MAIN SERVER Intel Xeon 5520 @ 2.27 GHz (2 processors) 16GB RAM 6 x 1TB Seagate Barracuda ES.2 Enterprise SATA drives Intel SRCSATAWB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: DC01 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM DC02 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM Member Server - DHCP server, File server, Print server - 1GB RAM SCCM Member Server - 4GB RAM Third Party Software Member Server - A/V server, Ticketing software, etc - 4GB RAM Exchange 2007 - 4GB RAM - however we are probably migrating to a hosted solution, therefore freeing up resources BACKUP SERVER Intel Xeon E5410 @ 2.33GHz (2 processors) 16GB RAM 6 x 2TB WD RE4 SATA drives Intel SRCSASRB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: AppAssure backup software - 8GB RAM

  Read the article

< Previous Page | 653 654 655 656 657 658 659 660 661 662 663 664  | Next Page >