Search Results

Search found 48324 results on 1933 pages for 'how stuff works'.

Page 659/1933 | < Previous Page | 655 656 657 658 659 660 661 662 663 664 665 666  | Next Page >

  • Tomcat Solr times out

    - by user568458
    (Plesk 10.4 centos 5.8 linux apache2 server, with Tomcat5 on port 8080 and Apache Solr) I get "The connection has timed out" on requesting domain.com:8080 or www.domain.com:8080 or ip.ad.dr.ess:8080 Every reason I can find why this might be seems not to be the case: Plesk thinks Tomcat is running fine and lists it as an active service. The firewall currently has an accept all rule on port 8080. There's nothing relevant in the catalina tomcat logs (/var/log/tomcat5) - just some stuff from last time tomcat was started. There's no record at all of the requests that fail. netstat -lnp | grep 8080 gives the following, which I beleive means Tomcat is listening to requests to port 8080 on all ip addresses from any ip and any port (please correct me if I'm wrong): : tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 4018/java This covers every cause of this time out that I can find - so I must be missing something fundamental. It seems Tomcat is running, listening to the right port, is getting an appropriate IP address, is not obstructed by a firewall and is not failing after receiving a request in a way which would be recorded in the logs (so I believe it can't be out of memory, or anything like that). I'm all out of ideas on how to continue debugging this. I must have overlooked something obvious. Can anyone help?

    Read the article

  • Mac Backup Plan

    - by Chuy77
    I'm reviewing my backup plan and would appreciate any thoughts about what more I should do (if anything) to make sure I'm properly covered in case of all hell breaking loose. :-) I have one machine. 1) I run a nightly clone with SuperDuper. I alternate the clone drive weekly so I have two clones, one never more than a week old. 2) I use BackBlaze as a sort of Time Machine in the cloud. It runs all the time and keeps everything on my machine backed up online. 3) I sync all my 1Password logins, etc. to my iPhone once a week. ...And that's it. I feel pretty covered. But I'm always reading stuff like this: http://www.43folders.com/2010/03/15/yes-another-backup-lecture And that doesn't even mention online backup, and seems like a huge pain in the behind. But maybe I'm being naive? Should I have more backups? Thanks for any feedback. I really appreciate it.

    Read the article

  • Ubuntu Wubi "drive" failure; mount drive in XP?

    - by 618034
    Hi there, I installed the Wubi distribution of Ubuntu on a separate partition (which is silly, since why do I care if Windows can still manage the partition?) a few months back; it was pretty awesome, until Linux hosed. At this point, I can get Ubuntu to boot if I try really hard through grub, but once it does start, the screen is hosed, so no dice. At this point, I'd like to wipe it all and start over, but I need to get some stuff off the "disk". The Wubi install makes this difficult, since the "disk" is a flat file on an NTFS partition. I've done just about everything I can think of — I renamed the virtual disk .iso, mounted it with VirtualCloneDrive, then used whatever magic EXT3 (EXT4?) readers I could dig up on the Internet to parse the mount — but nothing's working. Can you offer any suggestions? The "disk" is currently in D:\ubuntu\disks\root.iso. Many thanks! (I may be high-latency at the moment, apologies if I don't address follow-ups quickly)

    Read the article

  • Libraries merged folder views

    - by Stigma
    So I pretty much love the Windows 7 Libraries feature, and saw one use for them that I thought would be perfect, but I can't seem to manage it. Basically, a merged view of different folder structures. Suppose I make a new generic library and add three locations to it: C:\Test\, D:\Test\ and D:\temp\Test\. Now, these may look somewhat okay as long as there are no duplicates in these folders. (It wants to group them based on the included directory, which one can work around by looking on google - I don't have the precise trick on hand I am afraid.) But when you get collisions and, say, two of those directories have a Sub directory in them, stuff becomes unusable (assuming Arrange by: Folder view). You'll have multiple folders listed named Sub, which is pretty useless when looking for data. I want folders to get 'merged', which ought to be possible somehow since it can create these merged views based on artist, album etc in other views. So all subdirectories that are double (and recursively checking for doubles inside those, etc) ought to be merged for as far the View is concerned. If files have a collision, I don't really care what happens - hide one, show both, filter out duplicates, whatever. (Although an option would be nice...) Anyhow, is there anyone who knows how to get such a 'merged folder structure' functionality for Libraries? It would be really useful for me.

    Read the article

  • Correctly setting up UFW on Ubuntu Server 10 LTS which has Nginx, FastCGI and MySQL?

    - by littlejim84
    Hello. I'm wanting to get my firewall on my new webserver to be as secure as it needs to be. After I did research for iptables, I came across UFW (Uncomplicated FireWall). This looks like a better way for me to setup a firewall on Ubuntu Server 10 LTS and seeing that it's part of the install, it seems to make sense. My server will have Nginx, FastCGI and MySQL on it. I also want to be allow SSH access (obviously). So I'm curious to know exactly how I should set up UFW and is there anything else I need to take into consideration? After doing research, I found an article that explains it this way: # turn on ufw ufw enable # log all activity (you'll be glad you have this later) ufw logging on # allow port 80 for tcp (web stuff) ufw allow 80/tcp # allow our ssh port ufw allow 5555 # deny everything else ufw default deny # open the ssh config file and edit the port number from 22 to 5555, ctrl-x to exit nano /etc/ssh/sshd_config # restart ssh (don't forget to ssh with port 5555, not 22 from now on) /etc/init.d/ssh reload This all seems to make sense to me. But is it all correct? I want to back this up with any other opinions or advice to ensure I do this right on my server. Many thanks!

    Read the article

  • Trying to run a codeigniter app on custom php

    - by hamstar
    I have a CodeIgniter app that I deployed to a server with php 5.2 and my dev box has 5.3, and some stuff doesn't work anymore. I didn't want to upgrade php and risk the other app on the server having issues. Anyway I compiled a custom PHP and added the following to a single .conf file in /etc/httpd/conf.d/zcid.conf with all the other conf files. <VirtualHost *:80> DocumentRoot /var/www/cid/app ServerName sub.example.co.nz </VirtualHost> <Directory "/var/www/cid/app"> authtype Basic authname "oh dear how did this get here i am no good with computer" authuserfile /path/to/auth require valid-user RewriteEngine on RewriteCond $1 !^(index\.php|robots\.txt|createEvent\.php|/cgi-bin) RewriteRule ^(.*)$ /index.php/$1 [L] AddHandler custom-php .php Action custom-php /cgi-bin/php53.cgi </Directory> In /var/www/cid/app I have the cgi-bin folder and the php53.cgi that I copied from /usr/local/php53/bin/php-cgi But now when I navigate to the subdomain it says: The requested URL /cgi-bin/php53.cgi/index.php/ was not found on this server. And if I try to browse to /cgi-bin it says (what it is supposed to?): You don't have permission to access /cgi-bin/ on this server. Quite confused now. Anyone know what to do here? Thanks :)

    Read the article

  • Setting up a network where packets are traced

    - by Marcus
    My situation is the following: I have an internet connection, which is shared between people. More or less obviously, people is using it to download illegal stuff. Since I'm the owner of the connection, I want to avoid being sued. I don't want to prevent the people from doing the things they want, but I want to be legally safe. Now, I have relatively little competences in network administration, so I was wondering: is it possible to setup a network, where the source and destination of the packets are logged? I would use this to prove, in case of lawsuit, that the traffic was coming from a given machine. if the idea is feasible, is there any wireless router on which I can install linux, where I can install the packet sniffer? how much space could the logs take (containing only the timestamp/source/destination), per GB of traffic? a very rough estimation would be very helpful. if a machine on my network is sending bittorrent packets to a certain IP, would this log be able to reflect the time, source ip and destination ip? I assume that obviously the torrent data would be encrypted and un-decryptable. Am I missing something? Is there a better strategy? Any pointer to documentation would be helpful as well - in that case, I would use this as starting point.

    Read the article

  • Increse gap (pause) between songs

    - by holms
    Hello, I googled a lot before asking. This is really a problem. I know that there's an option in preference to switch off cross fading, but this is not what I want to do. Cross fading doesn't add any gap at all. If there's no gap between two songs, so you won't hear any. I need a real GAP between song, I mean a REAL pause about 2 seconds. Why? My MD player can't handle songs if there are no gaps in line input. Even with 1 second gap MD records 2 songs as 1. Is there any software that can increase the gap in the playlist? I know that Winamp has a plugin for putting pauses between songs. Is there anything for iTunes or Mac OS X? Another work around is to add a 2 sec MP3 between each song in the playlist but this is really killing me to do. I'm more on lossless stuff, so .CUE files would be an option too (using XLD for converting)

    Read the article

  • Installing Windows 7 over PXE, preferably with domain autojoin

    - by Ivan Vucica
    At an educational non-profit, I've inherited a previously set-up Windows domain that, after the first reinstall of the machines, we ended up not using by simply not joining machines back into the domain. Over last summer, before the annual reinstall for shipping machines to the summer school, I toyed with the idea of installing Windows 7 over network, instead of just imaging the machines. It took a bit longer than I expected to figure out the basics; honestly, I expected that Windows would be more friendly for PXE installation out of the box. What I'm interested in is best practices for installing Windows 7 over PXE with domain autojoin. I'd love it if the whole setup could optionally be hosted on a UNIX based system as well. I've had some success by preparing an ISO using Windows Deployment Kit, and loading the ISO into memory. This was needed since I wanted a menu, and I think I couldn't get PXELINUX to chainload into Windows' bootloader. Unfortunately, I couldn't figure out much about customization of the Windows setup in that timeframe nor could I get Samba to work properly; studying the stuff ended up being too lengthy, especially the portion where I edited a disk image on Windows and copied it outside. WDK didn't make things easier by mounting the disk image into RAM, and writing it in its entirety when done with it, making me a very sad boy. I've recently found a different approach, too, that appears to be closer to Microsoft's original idea for netboot deployment and does not involve ISOs. So my question boils down to the following. What exact approach do you use for netbooting Windows 7 setup? How can Windows 7 setup be best customized to be completely unattended, including installation on specific system partition and not destroying the data partition, creation of passworded admin and default user, choice of MAC-address-based hostname, and joining a domain? As much details as possible for everyone's future reference would be appreciated. WDS isn't a bad choice, but if a Linux-based install can be used, that'd be better.

    Read the article

  • Windows Domain Chaos - Any Solving Approach

    - by Chake
    we are running an old Window 2003 Server as Domain Controller (DC2003). To safely migrate to Windows 2008 R2 we added a 2008 R2 (DC2008R2) to the domain as domain controller (adprep etc.). After dcpromo on DC2008R2 everything seemed to be ok. The new DC appeared under the "Domain Controlelrs" node. It wasn't checked at this time, if DC2008R2 can REALLY act as domain controller. Later we tried to shutdown DC2003 and ran into a total mess with non functional Exchange and Team Foundation Services. After that I got the job to fix... First i thought it could be an Problem with DC2008R2. So I removed it as Domain Controller and installed a new Windows 2008 R8 Server DC2008R2-2. I ran into similar Problems. I tried a bunch of stuff, but nothign helped. I won't list it, maybe I made an mistake, so I'm willing to redo it with your suggestions. To have a starting point I tried the best practise analyser whicht ended up with 24 "Compatible" and 26 "Not Compatible" tests. From these 26 tests 19 read the same. (I'm translating from german, so that may to be the exact wording) Problem: Using the Best Practise Analyser for Active Directory Domain Services (Active Directory Domain Services Best Practices Analyzer, AD DS BPA) no data can be be gathered using the name of the forest and the domain controller DC2008R2-2. I appreciate any suggestions, this really bothers me.

    Read the article

  • Trying to run a codeigniter app on custom php

    - by hamstar
    I have a CodeIgniter app that I deployed to a server with php 5.2 and my dev box has 5.3, and some stuff doesn't work anymore. I didn't want to upgrade php and risk the other app on the server having issues. Anyway I compiled a custom PHP and added the following to a single .conf file in /etc/httpd/conf.d/zcid.conf with all the other conf files. <VirtualHost *:80> DocumentRoot /var/www/cid/app ServerName sub.example.co.nz </VirtualHost> <Directory "/var/www/cid/app"> authtype Basic authname "oh dear how did this get here i am no good with computer" authuserfile /path/to/auth require valid-user RewriteEngine on RewriteCond $1 !^(index\.php|robots\.txt|createEvent\.php|/cgi-bin) RewriteRule ^(.*)$ /index.php/$1 [L] AddHandler custom-php .php Action custom-php /cgi-bin/php53.cgi </Directory> In /var/www/cid/app I have the cgi-bin folder and the php53.cgi that I copied from /usr/local/php53/bin/php-cgi But now when I navigate to the subdomain it says: The requested URL /cgi-bin/php53.cgi/index.php/ was not found on this server. And if I try to browse to /cgi-bin it says (what it is supposed to?): You don't have permission to access /cgi-bin/ on this server. Quite confused now. Anyone know what to do here? Thanks :)

    Read the article

  • Windows and file system abstraction - how much does it matter where something comes from?

    - by deceze
    I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Bootcamp driver package includes file system drivers (right term?) that enable Windows to access the Mac OS HFS+ partition. AFAIK it's a read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

    Read the article

  • Which version control should I use for my configuration files?

    - by rakete
    I want to store some of my configuration files (~/.emacs.d/, .Xdefaults, etc. linux $HOME stuff) in version control so I can easily sync them with my notebook/workplace and see my past changes and revert to them should the need arise. So far it seems to me that there are quite some people using git for this and I think that I too want to use a distributed vcs for this (if only to get more used to them) but I can't say that I am very experienced with all things dvcs. I did use darcs and git briefly and so far I can say that I really like the way git handles branches, and I think the possibility to have different branches within the same directory is especially useful for my use case. Darcs on the other hand has cherry picking of patches, which too is quite the convenient feature when managing configuration files (at least I assume it is). So, what would you recommend to use? And what would be your reasoning for your recommendation? What other vcs with nice feature that I haven't mentioned exist and would make a good vcs to store configuration files and why?

    Read the article

  • Traffic shaping on Linux with HTB: weird results

    - by DADGAD
    I'm trying to have some simple bandwidth throttling set up on a Linux server and I'm running into what seems to be very weird stuff despite a seemingly trivial config. I want to shape traffic coming to a specific client IP (10.41.240.240) to a hard maximum of 75Kbit/s. Here's how I set up the shaping: # tc qdisc add dev eth1 root handle 1: htb default 1 r2q 1 # tc class add dev eth1 parent 1: classid 1:1 htb rate 75Kbit # tc class add dev eth1 parent 1:1 classid 1:10 htb rate 75kbit # tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 10.41.240.240 flowid 1:10 To test, I start a file download over HTTP from the said client machine and measure the resulting speed by looking at Kb/s in Firefox. Now, the behaviour is rather puzzling: the DL starts at about 10Kbyte/s and proceeds to pick up speed until it stabilizes at about 75Kbytes/s (Kilobytes, not Kilobits as configured!). Then, If I start several parallel downloads of that very same file, each download stabilizes at about 45Kbytes/s; the combined speed of those downloads thus greatly exceeds the configured maximum. Here's what I get when probing tc for debug info [root@kup-gw-02 /]# tc -s qdisc show dev eth1 qdisc htb 1: r2q 1 default 1 direct_packets_stat 1 Sent 17475717 bytes 1334 pkt (dropped 0, overlimits 2782 requeues 0) rate 0bit 0pps backlog 0b 12p requeues 0 [root@kup-gw-02 /]# tc -s class show dev eth1 class htb 1:1 root rate 75000bit ceil 75000bit burst 1608b cburst 1608b Sent 14369397 bytes 1124 pkt (dropped 0, overlimits 0 requeues 0) rate 577896bit 5pps backlog 0b 0p requeues 0 lended: 1 borrowed: 0 giants: 1938 tokens: -205561 ctokens: -205561 class htb 1:10 parent 1:1 prio 0 **rate 75000bit ceil 75000bit** burst 1608b cburst 1608b Sent 14529077 bytes 1134 pkt (dropped 0, overlimits 0 requeues 0) **rate 589888bit** 5pps backlog 0b 11p requeues 0 lended: 1123 borrowed: 0 giants: 1938 tokens: -205561 ctokens: -205561 What I can't for the life of me understand is this: how come I get a "rate 589888bit 5pps" with a config of "rate 75000bit ceil 75000bit"? Why does the effective rate get so much higher than the configured rate? What am I doing wrong? Why is it behaving the way it is? Please help, I'm stumped. Thanks guys.

    Read the article

  • SQL Server replication and load balance

    - by Ahmed Galal
    I'm running a web service that serves a mobile app on IIS 8 and SQL Server 2014, my service has a massive load and i'm trying to improve performance, most of the load is happening on SQL. i don't think i have a bottleneck, my processor and ram is up to the max and i think my code is not that bad, am already using memcached and other stuff to avoid hitting SQL too much. i know i can always upgrade the server hardware but i already have a spare server that i would like to use, so i was thinking to split the SQL load on the 2 servers. What i was thinking of is to setup replication on the other server and do some load balancing, but am not sure how to do the load balance. I know i can adjust my code to hit the other server for some queries but i was hoping to find a solution that avoid changing my code. So my question is, What are the ways of doing load balancing between 2 SQL servers ? I would appreciate suggestions or best practices or some directions. Thanks.

    Read the article

  • Why Is Volume Shadow Copy Services stopping?

    - by David Mackintosh
    I am running Windows 7 Professional, 64-bit. I am running a backup-over-the-internet software client which depends on the Volume Shadow Copy Services running. Since I installed Service Pack 1 (or rather, didn't object when Windows Update forced Service Pack 1 on me) the backup service is failing to back everything up because VSC isn't running. Most of the time it fails to back up such noise as the Security Essentials database or the Messenger Live contact list -- stuff I really don't care about -- but I don't want to fall into the trap of accepting an Error-state backup as "normal". At the recommendation of the backup software, I have set the VSC service startup mode to be Automatic. When I look in the Event Log, System channel I can see at boot time: The Volume Shadow Copy service entered the running state. ...and then two or three minutes later: The Volume Shadow Copy service entered the stopped state. How do I figure out why VSC is stopping? At the suggestion of the backup vendor, I have already followed the suggestions from http://support.microsoft.com/default.aspx/kb/940184 net stop SENS net stop EventSystem net start EventSystem net start SENS net stop COMSysApp net stop SwPrv net stop VSS cd /d C:\Windows\system32 regsvr32 ole32.dll /s regsvr32 oleaut32.dll /s regsvr32 vss_ps.dll /s vssvc /register /s regsvr32 /i swprv.dll /s regsvr32 /i eventcls.dll /s regsvr32 es.dll /s regsvr32 stdprov.dll /s regsvr32 vssui.dll /s regsvr32 msxml.dll /s regsvr32 msxml3.dll /s regsvr32 msxml4.dll /s net start SwPrv net start VSS net start ProtectedStorage ...and per http://support.microsoft.com/kb/940184 I have deleted the key tree HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\EventSystem\{26c409cc-ae86-11d1-b616-00805fc79216}\Subscriptions I have also run chkdsk /F and chkdsk /R on both permanent hard disks. (I had a similar problem with another computer (same OS, same failure, same start point after SP1 install) but the problem went away when I forced Volume Shadow Copy Services to Automatic startup rather than Manual. I did not have to resort to following the Microsoft KB instructions.)

    Read the article

  • Simulating audio playback on headless linux server

    - by afro
    Hi people, We have a headless linux server (Debian 5) we use for runnin integration tests of our web-page code. Among these tests are ones implemented using Selenium, which practically simulates a user browsing our pages and clicking on things. One of these tests is failing now, because it involves starting a flash-based audio player and checking to see whether the progress bar gets displayed properly. The reason this test fails is that there is no way to play the audio, and no sound card on the machine, which has simple webserver hardware. So, my question would be: Is there a simple way of giving a program the impression that its audio output is being processed, and playback is taking place? I don't have to record the playback, or redirect it or anything like that, just a dummy soundcard, like the dummy X-server we aer using, which actually does not need to display stuff. I have tried using JACK, but it's too complicated, and the documentation does not even answer this very simple question. I also installed alsa on the server; it 'pretends' to run, but when a program tries to play audio, just spews error and debug information having to do with the non-existence of a soundcard. It would be really awesome if one of you has a simple answer to this question. Cheers, Ulas

    Read the article

  • Any non-custom way to manage iptables with fail2ban and libvirt+kvm?

    - by Peter Hansen
    I have an Ubuntu 9.04 server running libvirt/kvm and fail2ban (for SSH attacks). Both libvirt and fail2ban integrate with iptables in different ways. Libvirt uses (I think) some XML config and during startup (?) configures forwarding to the VM subnet. Fail2ban installs a custom chain (probably at init) and periodically modifies it to ban/unban probable attackers. I also need to install my own rules to forward various ports to servers running in VMs and on other machines, and set up rudimentary security (e.g. drop all INPUT traffic except the few ports I want open), and of course I'd like the ability to add/remove rules safely without restarting. It seems to me iptables is a powerful tool that's sorely lacking some sort of standardized way of juggling all this stuff. Every project, and every sysadmin, seems to do it differently! (And I think there's lots of "cargo cult" admin going on here, with people cloning crude approaches like "use iptables-save like so".) Short of figuring out the gory details of exactly how both of these (and potentially other) tools manipulate the netfilter tables, and developing my own scripts or just manually executing iptables commands, is there any way to safely work with iptables while not breaking the functionality of these other tools? Any nascent standards or projects defined to bring sanity to this area? Even a helpful web page I missed that might cover at least these two packages together?

    Read the article

  • Installing mysqlnd for php 5.4.9 on CentOs 6.3

    - by kira423
    Okay let me get straight to the point, I am a complete noob, and have never done stuff like this at all, I have read tutorial after tuorial but I cant get anything to work. When I tried to install the rpm file I got this error rpm -Uvh ftp://ftp.pbone.net/mirror/rpms.famillecollet.com/enterprise/6/test/x86_64/php-mysqlnd-5.4.9-1.el6.remi.x86_64.rpm Retrieving ftp://ftp.pbone.net/mirror/rpms.famillecollet.com/enterprise/6/test/x86_64/php-mysqlnd-5.4.9-1.el6.remi.x86_64.rpm warning: /var/tmp/rpm-tmp.ez4vvd: Header V3 DSA/SHA1 Signature, key ID 00f97f56: NOKEY error: Failed dependencies: php-pdo(x86-64) = 5.4.9-1.el6.remi is needed by php-mysqlnd-5.4.9-1.el6.remi.x86_64 so I tried installing that rpm file and got this error rpm -ivh ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm Retrieving ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm curl: (9) Server denied you to change to the given directory error: skipping ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm - transfer failed I used the ftp links because I have no idea how else to get them to the server. I think I am getting overly frustrated with this, but I have to get this driver installed for any of my scripts to function correctly. Any help would be greatly appreciated!

    Read the article

  • Debugging Windows PC freeze

    - by Violet Giraffe
    I have a problem with my computer, would appreciate any hints/ideas. It usually begins not immediately after booting Windows, but at some unpredictable point in time, which doesn't seem to correlate with any specific actions of mine. First sign of a problem is process System starting to consume 25% CPU time steadily. I have a quad-core CPU, so it might be one thread working non-stop. At this point micro-freezes start to occur - screen stops refreshing, but if I have, say, music player running - it continues playing. If I try to do something between the freezes, like open Start menu, it will freeze completely and forever. If I press reset button the PC will shut down and then start cold, as opposed to usual reset behavior (which doesn't include PC shutting down). I have noticed that full restart upon reset is usual for hardware problems, but I think this problem isn't related to at least motherboard-CPU-RAM-videoadapter. It certainly isn't caused by overheating. One very important not is that it seems to be related to Windows hosted WLAN network: I have USB Wi-Fi dongle and have configured a hosted network to share cable Internet connection with Wi-Fi devices. I am not 100% certain there's a strong connection, but in 9 or 10 cases when I enabled the network (by executing netsh wlan start hostednetwork), it did freeze eventually (sometimes within minutes of starting the network, sometimes within hours), and on at least 10 days when I didn't start the network it never froze, no matter how I used the computer). There are no critical/error entries in the events log that I can suspect as being related, only regular stuff like "driver not loaded". I have found no critical/error events that are being logged around the time of freeze occurring and are not logged during normal boot without starting the WLAN.

    Read the article

  • Copy one db diagram from one db to another on different servers? (Same db)

    - by sah302
    I used the copy database wizard to copy my database from our test server to our production server, the database copied everything fine except for the diagram. Okay no problem, first I make sure the target database on production has the support objects created to use database diagraming. Then I select to import data from the other database and chose the dbo.sysdiagrams.Go through with the rest of the import data wizard, but then I get the following error: Validating (Error) Messages Error 0xc0202049: Data Flow Task: Failure inserting into the read-only column "diagram_id". (SQL Server Import and Export Wizard) Error 0xc0202045: Data Flow Task: Column metadata validation failed. (SQL Server Import and Export Wizard) Error 0xc004706b: Data Flow Task: "component "Destination - sysdiagrams" (31)" failed validation and returned validation status "VS_ISBROKEN". (SQL Server Import and Export Wizard) Error 0xc004700c: Data Flow Task: One or more component failed validation. (SQL Server Import and Export Wizard) Error 0xc0024107: Data Flow Task: There were errors during task validation. (SQL Server Import and Export Wizard) So apparently it didn't like that. What's the problem? I am pretty beginner in SQL Server and only do stuff via the GUI usually so am not sure what to do at this point. The databases are the same, but on different servers. Thanks!

    Read the article

  • Repairing hard disk when Windows installation disk won't boot

    - by Echows
    I'm trying to recover some data from a faulty hard disk with Windows installed on it (on which Windows won't even boot). I have tried so far: Booting to Ubuntu live USB stick and running ntfsfix (didn't work) Trying to mount the broken partition when running Ubuntu from usb stick (doesn't mount) Running photorec image recovery tool from live Ubuntu (it found some stuff but not the images I was looking for) Now as a last resort I got myself a Windows installation on a USB stick so that I can try fdisk, but the installer doesn't work. The loading screen shows up and then the installer crashes. The installer works fine on other computers. I suspect that the installer is trying to read the hard drive to see if there's something there but when it can't read one partition, it crashes. On Ubuntu, I can mount other partitions except the one I'm interested in so at least the hard drive is not completely dead. So the question is, what options do I have left? To be more specific, my goal is to recover some images from the faulty ntfs-partition on the hard drive. Other than that, I don't care about the contents of the hard disk.

    Read the article

  • iptables to block non-VPN-traffic if not through tun0

    - by dacrow
    I have a dedicated Webserver running Debian 6 and some Apache, Tomcat, Asterisk and Mail-stuff. Now we needed to add VPN support for a special program. We installed OpenVPN and registered with a VPN provider. The connection works well and we have a virtual tun0 interface for tunneling. To archive the goal for only tunneling a single program through VPN, we start the program with sudo -u username -g groupname command and added a iptables rule to mark all traffic coming from groupname iptables -t mangle -A OUTPUT -m owner --gid-owner groupname -j MARK --set-mark 42 Afterwards we tell iptables to to some SNAT and tell ip route to use special routing table for marked traffic packets. Problem: if the VPN failes, there is a chance that the special to-be-tunneled program communicates over the normal eth0 interface. Desired solution: All marked traffic should not be allowed to go directly through eth0, it has to go through tun0 first. I tried the following commands which didn't work: iptables -A OUTPUT -m owner --gid-owner groupname ! -o tun0 -j REJECT iptables -A OUTPUT -m owner --gid-owner groupname -o eth0 -j REJECT It might be the problem, that the above iptable-rules didn't work due to the fact, that the packets are first marked, then put into tun0 and then transmitted by eth0 while they are still marked.. I don't know how to de-mark them after in tun0 or to tell iptables, that all marked packet may pass eth0, if they where in tun0 before or if they going to the gateway of my VPN provider. Does someone has any idea to a solution? Some config infos: iptables -nL -v --line-numbers -t mangle Chain OUTPUT (policy ACCEPT 11M packets, 9798M bytes) num pkts bytes target prot opt in out source destination 1 591K 50M MARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner GID match 1005 MARK set 0x2a 2 82812 6938K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner GID match 1005 CONNMARK save iptables -nL -v --line-numbers -t nat Chain POSTROUTING (policy ACCEPT 393 packets, 23908 bytes) num pkts bytes target prot opt in out source destination 1 15 1052 SNAT all -- * tun0 0.0.0.0/0 0.0.0.0/0 mark match 0x2a to:VPN_IP ip rule add from all fwmark 42 lookup 42 ip route show table 42 default via VPN_IP dev tun0

    Read the article

  • Postfix misconfigured? 550 Sender rejected from recieving server

    - by wnstnsmth
    We use Postfix on our CentOS 6 machine, having the following configuration. We use PHP's mail() function to send rudimentary password reset emails, but there is a problem. As you will see, mydomain and myhostname is correctly set, afaik. alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = localhost inet_protocols = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost mydomain = ***.ch myhostname = test.***.ch newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550 Now this is the stuff that is in the /var/log/maillog of Postfix upon sending an email to ***.***@***.ch, with ***.ch being the same domain our sending server test.***.ch is on: Dec 13 16:55:06 R12X0210 postfix/pickup[6831]: E6D6311406AB: uid=48 from=<apache> Dec 13 16:55:06 R12X0210 postfix/cleanup[6839]: E6D6311406AB: message-id=<20121213155506.E6D6311406AB@test.***.ch> Dec 13 16:55:07 R12X0210 postfix/qmgr[6832]: E6D6311406AB: from=<apache@test.***.ch>, size=1276, nrcpt=1 (queue active) Dec 13 16:55:52 R12X0210 postfix/smtp[6841]: E6D6311406AB: to=<***.***@***.ch>, relay=mail.***.ch[**.**.249.3]:25, delay=46, delays=0.18/0/21/24, dsn=5.0.0, status=bounced (host mail.***.ch[**.**.249.3] said: 550 Sender Rejected (in reply to RCPT TO command)) Dec 13 16:55:52 R12X0210 postfix/cleanup[6839]: 8562C11406AC: message-id=<20121213155552.8562C11406AC@test.***.ch> Dec 13 16:55:52 R12X0210 postfix/bounce[6848]: E6D6311406AB: sender non-delivery notification: 8562C11406AC Dec 13 16:55:52 R12X0210 postfix/qmgr[6832]: 8562C11406AC: from=<>, size=3065, nrcpt=1 (queue active) Dec 13 16:55:52 R12X0210 postfix/qmgr[6832]: E6D6311406AB: removed Dec 13 16:55:52 R12X0210 postfix/local[6850]: 8562C11406AC: to=<root@test.***.ch>, orig_to=<apache@test.***.ch>, relay=local, delay=0.13, delays=0.07/0/0/0.05, dsn=2.0.0, status=sent (delivered to mailbox) Dec 13 16:55:52 R12X0210 postfix/qmgr[6832]: 8562C11406AC: removed So the receiving server rejects the sender (line 4 of log output). We have tested it with one other recipient and it worked, so this problem might be completely unrelated to our settings, but related to the recipient. Still, with this question, I want to make sure we're not making an obvious misconfiguration on our side.

    Read the article

  • ACDSee alternatives for batch editing images

    - by Oxwivi
    I am looking for free, preferably open, alternatives to ACDSee for batch editing work. While I can do much of the work well on ACDSee, it's not entirely satisfactory despite having to pay for it. I need at least the following batch editing functions: Resize using either height or width and maintain aspect ration Auto contrast text overlays and occasionally, cropping oh, I make extensive use of renaming features as well Couple of issues with ACDSee are: I always need to highlight the Exposure section or auto contrast will not be done despite it being saved in the preset; and I can't define, move around the cropping box, forcing me to manually crop tons of images. I'm not an advanced, or "power photo-editor". I only require the basic stuff I described to be automated. My personal feature wish list (I'm pretty sure something so niche doesn't exist) would be text overlay based on the image names (images are named as image-1_1, image-1_2 or image-2_c1_1, image-2_c1_2, and text overlay would Image-1 and Image-2 C1 and Image-2 C2). I tried digiKam, but damn that thing is huge. It runs very slowly on my Pentium 4 and 1.5 GB RAM. On top of being a program with over 1 GB of files, the KDE library it uses is always slow regardless of it running on either Windows or Linux.

    Read the article

< Previous Page | 655 656 657 658 659 660 661 662 663 664 665 666  | Next Page >