Search Results

Search found 18341 results on 734 pages for 'neural network'.

Page 660/734 | < Previous Page | 656 657 658 659 660 661 662 663 664 665 666 667  | Next Page >

• Buying an old laser printer -- what will need to be replaced?

  - by marienbad

  Hi all -- as you can see I'm new. I do IT and wiring for a small local shop but I never deal with printers. I do a LOT of printing, and I'd like to stop spending as much money on it. On my local CL, there is an HP 8100DN (duplex network) printer for a very good price (and the toner is a quarter-cent per page). It has printed 200,000 pages and I don't yet know anything else about it. The model was released in 1999. So my questions: What are the parts that tend to need service on laser printers? On ebay, I see fusers, rollers, DC power boards, and motors. What would you expect to replace soon at 200,000 pages? Are there any good "tests" to find out if certain parts are near failure? Do you have anything to say about the HP 8100 specifically? The bottom line for me is that if there's any chance of repairs costing more than $100, it's not worth it for me.

  Read the article

• How to connect android client to the localhost of Apache server (php) inside my laptop?

  - by user1796310

  I'm trying to create android apps which able sending data through wifi connection to my laptop Apache Server and MySQL database. I use the samsung galaxy tab 10.1 as my mobile device. and the protocol i used is HttpGet or HttpPost. And i use XAMPP( with Apache& SQL) to do the server and process the php. But, due to android cannot detect adhoc network from laptop, i use Virtual Router ( for window 7) to create virtual access point and make the tablet able connect to my laptop. But the problem is: [1] in my apps (client-android), where the httpget or httppost to which url? localhost in my laptop- 127.0.0.1 or localhost in android 10.0.0.1? or the ip address of the virtual router? [2]so, if i want access from android to the localhost(laptop-Apache) to call the php to run? which port? which ip address /url that i need to put in android apps(httpget)? and do i need to modify anything in httpconfig for XAMPP? thanks alot.

  Read the article

• Does image block (firefox addon) save internet bandwidth usage?

  - by dkjain

  Does image block save internet bandwidth usage. I have a data capped plan from my ISP ( 5GB at 2mbps and thereafter 256 kpbs / pm). I doubt if the addon or other similar addon actually saves bandwidht. Here is my point of view, pls correct if that is wrong. When a request is sent to the server, the server sends out whatever page it's requested to serve with all its text and images etc. So essentially my ISP has made his pipe available for the data to reach me thus he would count those bytes under my data plan. When the data arrives it's all first stored to my browser cache (folder) area which means all the data has actually been received by me/computer using my ISP's pipe. The browser then fetches those data from the cache and displays it. By hitting the stop button or blocking images via ur addon I am just choosing not to display the data which would remain in the cache or eventually be discarded if still on the network pipe after a timeout limit. The point is the data request have been completed by the ISP and so the data would be metered and thus using addon such as image block or hitting stop button while page is loading does not in any way save internet bandwidth. Your comments plz....... Regards dk.

  Read the article

• Apache on CentOS 5.9 VM serves my optimized images corrupted (but my Mac doesn't)

  - by Robert K

  I'm using a Vagrant VM to mirror the client's environment as closely as I can. As part of our build process we do no optimization of assets early on; that comes as we're ready to take a site live. Needless to say, this issue is beginning to worry me as we need to take the site live very soon. I use ImageOptim to automate optimization of image assets, which runs a whole series of tools (Zopfli, PNGOUT, OptiPNG, AdvPNG, PNGCrush). I always set the optimizations to their maximum setting. After optimization, my PNGs start looking like this: What's weird is, if I serve the same file through my Mac's copy of Apache, not through Vagrant, the image loads fine. In fact, the only time it's ever corrupt like this is when the image is served from the Vagrant VM and its install of Drupal. All optimized JPEGs display only the first ~20% of the image. And PNGs, depending on the image, may show either a portion or the "progressive"-style corruption below. The browser itself makes no difference, the same browser will serve an uncorrupted image from my Mac's Apache instance and a corrupt image from the VM. When I disable all PNG optimizations except PNGCrush, and the removal of the PNG metadata, the image is served corrupted. I'm optimizing JPEG images with JPEGmini. The server is running CentOS 5.9, Apache 2.2.3-85, PHP 5.3.3, and Drupal 7. As best as I can tell the error lies somewhere within the VM, either with Apache or with (perhaps) the network stack. Seems like the tools that optimize the compression of the PNGs and JPEGs are what trigger this error. I've already determined that the .htaccess file isn't interfering with how the images load. What should I try to troubleshoot this?

  Read the article

• Glassfish and SSL [closed]

  - by Richard

  I'm struggling to get SSL working on Glassfish 3.1.1. I've been following tutorials like http://javadude.wordpress.com/2010/04/06/getting-started-with-glassfish-v3-and-ssl/ and SO posts like this Issues with setting up SSL on Glassfish v3 The above links are for information only. I've summarised what I've done below. As far as I can tell I'm doing everything correctly but I'm getting this error: SSL configuration is invalid due to No available certificate or key corresponds to the SSL cipher suites which are enabled Some background of what I have done: My cert is from GoDaddy. I generated the CSR from a new keystore (keystore.jks), then imported the resulting certs back into the same keystore and set the keystore password to the same pwd as the GF master password. Then created a new SSL listener in GF and pointed it at my keystore file (which I copied into domains/domain1/config). Set the Nickname to the alias of my cert (which is something liem 'mydomain.org' i.e. the name that I get when I run keytool -list. In my ciphers section in the network listeners page, I leave the defaults in place (empty, which means all ciphers are available I think). In domain.xml I've replaced all instances of s1as to 'mydomain.org'. This is the question: What exactly is causing the error highlighted? I'm guessing it's a mismatch between my listener config and aliases in my keystore, or something similar, but I'm not really sure what. Thanks

  Read the article

• Issues with returned mail sent to web-based email domains

  - by Beeder

  My company is having issues with returned mail that we send out to external domains. A few weeks ago we replaced a firewall and changed ISP providers and began subsequently having issues RECEIVING emails from external sources because we hadn't updated our new IPs in the DNS records. After making the necessary configuration changes and setting up SMTP forwarding over port 25 to our mail server, everything was working fine up until a few days ago when we started having mail sent out returned to us. We aren't having any trouble communicating internally (to recipients on our domain) but it seems we're having trouble with outbound messages to web-based email recipients. (@hotmail, @live, @yahoo, @gmail...etc) Currently we are running Server 2003 SP2 and exchange 2003. I'm very unfamiliar with configuring Exchange and could really use some help in narrowing down the possibilities. I did some research and am becoming suspicious of Sender ID being the culprit due to our recent IP address change and the likelihood that Sender ID is identifying us as a fake domain. Am I going in entirely the wrong direction? Any input or guidance would be infinitely appreciated. This is the message that is returned when an outbound message fails...this particular one was sent to my @live.com account for testing purposes... Your message did not reach some or all of the intended recipients. The following recipient(s) could not be reached: [email protected] on 5/17/2012 3:02 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. Unfortunately, messages from xx.x.xx.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. I tried a reverse DNS lookup and found that we are set up as a Forward-confirmed reverse DNS. So do I just need to contact my ISP and have them correct their DNS records or is this something I can solve on our end??

  Read the article

• Unwanted forced authentication after server restart (Win 2k3)

  - by Felthragar

  We're running a Win 2k3 R2 Standard 64-bit edition server. On this server we're running a fileserver and the ability to allow remote login to our network through vpn. We do not currently utilize a domain setup, all user accounts are local accounts on the server. Each employee is given a unique account to login to the server. The password is a randomly generated 16 character long string, which makes it hard to remember. What we've done is basicly had the password stored on the client machine (standard "Remember Me" functionality). This has worked well. However, last night our server automatically restarted after an automatic update. After that, some of our employees, myself included, had to re-authenticate with the server, submitting our credentials again. Then again, some others did not have to re-authenticate. Do you guys have any idea why this is? Is there a setting to prevent this? I've checked the logs but I couldn't find anything of interest. Then again I'm not really sure what I'm looking for. Thanks in advance, I'll try to answer any additional questions you may have. Edit: When I say "login" or "authenticate" I mean through the standard windows samba protocol. Edit 2: Ok, new day. Tonight the server restarted again, and the same two clients that had to re-authenticate yesterday had to re-authenticate today as well. The rest did not.

  Read the article

• How do i Setup a Mac OS X Server - NameServer behind an Airport Extreme?

  - by basilmir

  I have a Mac mini server i want to setup to host a couple of things. My setup is as follows: The WAN connection (static IP and ISP nameservers) goes into the wan port of the Airport Extreme. The Mac mini server is connected to one of the ethernet ports. The mac mini will host my domain something.com. My settings so far: Airport Express gets: 96.x.x.x as the external static IP from the ISP 174.y.y.y as the nameserver Mac mini server always gets a reserved DHCP IP from the Airport Express: 10.0.1.3 is the server's ip 10.0.1.1 as the dns (this ip is the airport express itself) My dns server has an A record pointing to ns.something.com and a PTR doing the reverse. I've already added my 96.x.x.x to point ns.something.com with my registrar as attached. NOW: Nobody seems to be able to access my ns.something.com to resolve any of my records. From a any computer in my network I CAN see my ns and everything works. The outside on the other hand does not... it's as if the airport extreme which "holds" the exterior 94.x.x.x address doesn't pass DNS along to my 10.0.1.3 ns server. I have the server managing the airport. Isn't this supposed to work?

  Read the article

• How to resume XMPP groupchat window in Irssi (using bitlbee)?

  - by mcnesium

  I use Bitlbee to chat in XMPP-networks within my IRC-client Irssi. This works great so far, and recently I started using XMPP Multi User Chats as an alternative to IRC-channels. I set up a channel using chat add <account> <[email protected]> in the &bitlbee control window, set chan <room> set autojoin true and entered /join #room in the &bitlbee window to join that groupchat. It then appears as a unique Irssi window in the status bar. This seems to work ok too, but with one exception: Since I idle in the channels 24/7 my irssi has to cope with the every-night-24h-DSL-disconnection by the ISP. After it automatically reconnects, it does kind of rejoin that XMPP-groupchat, but the traffic of the groupchat does not go back to the unique irssi window, but keeps flooding &bitlbee with messages from root telling me about a Groupchat Message from unknown JID <jid>: <message> - which is the traffic of the groupchat. The unique groupchat window is gone after the reconnect, and I will again have to go /join #room in &bitlbee to get it back. Even worse, the window number is unused before I rejoin the groupchat, and if I get a query from any network, the window nests in that unused window spot, so I will first have to remove that query from the spot, and then move the rejoined groupchat to that window number. I want my groupchat window to resume after the reconnect just like every other IRC channel too. How can I get this done? Any ideas?

  Read the article

• Iptables - forward email ports?

  - by Emmet Brown

  im trying to open some local ports (LAN) and then re-direct them to another server (WAN) using iptables. Here is my config: #WAN allow-hotplug eth1 auto eth1 iface eth1 inet static #Tarjeta red WAN address 192.168.2.2 gateway 192.168.2.1 netmask 255.255.255.0 #LAN allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.16.6 netmask 255.255.255.0 network 192.168.16.0 broadcast 192.168.16.255 I try this: iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 110 -j DNAT --to 200.40.30.218:110 iptables -A FORWARD -p tcp -i eth0 -o eth1 -d 200.40.30.218 --dport 110 -j ACCEPT iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 25 -j DNAT --to 200.40.30.218:25 iptables -A FORWARD -p tcp -i eth0 -o ethq -d 200.40.30.218 --dport 25 -j ACCEPT but, it did not work. i also try changeing eth0 to eth1 (and eth1 to eth0) but nothing happened. Starting Nmap 5.00 ( http://nmap.org ) at 2011-10-03 14:44 UYST Interesting ports on 192.168.16.6: Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 111/tcp open rpcbind 8080/tcp open http-proxy Im running debian. Can u guys help me to check what is happening? edit: IPTABLES-SAVE # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *mangle :PREROUTING ACCEPT [139993:77867651] :INPUT ACCEPT [139385:77761761] :FORWARD ACCEPT [186:12071] :OUTPUT ACCEPT [173556:74341650] :POSTROUTING ACCEPT [173734:74352988] COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *nat :PREROUTING ACCEPT [1649:190626] :POSTROUTING ACCEPT [6729:339646] :OUTPUT ACCEPT [6697:337660] -A PREROUTING -i eth0 -p tcp -m tcp --dport 110 -j DNAT --to-destination 200.40.30.218:110 -A PREROUTING -i eth0 -p tcp -m tcp --dport 25 -j DNAT --to-destination 200.40.30.218:25 COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *filter :INPUT ACCEPT [138307:77066136] :FORWARD ACCEPT [168:11207] :OUTPUT ACCEPT [172288:73655708] -A FORWARD -d 200.40.30.218/32 -i eth0 -o eth1 -p tcp -m tcp --dport 110 -j ACCEPT -A FORWARD -d 200.40.30.218/32 -i eth0 -o ethq -p tcp -m tcp --dport 25 -j ACCEPT COMMIT # Completed on Mon Oct 3 15:43:14 2011 Regards

  Read the article

• Proper approach to debug PC startup problems (POST)

  - by saurabhj

  My CPU was heating up to around 65 deg C and last time this had happened (about a year ago), I got thermal paste put between the CPU and heat sink and this managed to get it down to about 45 - 50 degrees. This time, I got some thermal paste and put it myself. However, my PC is not showing the POST display and not starting up. This is what happens LEDs light up HDDs spin Mouse is getting power All fans including the processor fan starts No display on monitor No diagnostic beep sounds (no sounds at all) What I have tried Removing everything including RAM, HDD, PCI cards, AGP card Boot up machine No changes from first state. What steps can I take to figure out where the problem lies? Note (might be important) When I removed the heat sink, the processor came out with it (it was stuck to it inspite of the processor latch on) Had to pry it separate with a screw-driver. Configuration Pentium 4, 2.8 Ghz with HT (very old, I know) Original Intel Mobo with onboard sound and graphics (GB series) 2x512 Mb DDR-RAM 2 SATA disks (320 Gigs / 250 gigs) DVD Writer Creative Sound Card Network card Any help would be appreciated. Thanks!

  Read the article

• MySQL stops accepting connections over 3306, still working on localhost

  - by Ben Dilts

  I have a MySQL database that stopped accepting connections from my web server altogether. So I SSH'ed into the server and started checking its vitals. The hard disks had plenty of open space, and there was plenty of available memory and swap space. Nothing was eating up the CPU (close to 100% idle). I even connected to MySQL locally and ran a few queries without any issues. But SHOW PROCESSLIST only showed my own connection, no others. Worst of all, in the MySQL log, no errors even remotely coincided with the unavailability of the server. On the web server, I got an error saying "Lost connection to MySQL server during query" at the moment the unavailability started, followed by a bunch of "MySQL server has gone away" errors. There's only one other application on the server that accepts network connections, and I killed that one (in case it was holding too many open connections or something), but it didn't help. Finally I just restarted the MySQL process, and everything is (for now) working again. What else should I check in these circumstances? Any idea what the problem might be? And how might I verify that is in fact the problem?

  Read the article

• Make a drive from one machine appear as a physical disk in another machine.

  - by Roberto Sebestyen

  I want to take a physical disk (or part of a disk) in one machine (call it machine-A) and I want to make it available in another machine (machine-B). But I don't want to map a network drive. I want it to appear in machine-B as a physical drive. Even though it is not a physical drive. The reason I want to do this is i want the ability to create shares in machine-B on that drive. Since I cannot do that on mapped drives, I need to use some utility that fools machine-B to think that it is a physical drive, and treat it as such. Both of these machines are windows server 2003. I heard about NFS, It sounds like what could be the solution to my problem. But isn't that a Linux/Unix protocol? What tools can I use to make this happen? Are there any open source solutions? I don't care what the solution is, as long as it achieves the end result, preferably open source solution though. Thanks for reading guys and gals!

  Read the article

• PFSence VPN Routing

  - by SvrGuy

  We use PFSense firewalls at three installations with the following LAN networks: 1.) Datacenter #1: 10.0.0.0/16 2.) Datacenter #2: 10.1.0.0/16 3.) HQ: 10.2.0.0/16 All of these locations are linked via an IPSEC tunnel that works properly. Hosts in any of the above networks can communicate with hosts in any other of the above networks. Now, for our laptops etc. we established a road warrior network 10.3.0.0/16 and have implemented OpenVPN to link the laptops etc. to Datacenter #1. This works great too, so our laptops can connect and communicate with any host in Datacenter #1 (anything on 10.0.0.0/16) The problem is the laptops can't communicate with any hosts that Datacenter #1 can reach by its IPSEC tunnel to Datacenter #2 (and/or the HQ for that matter). Does anyone know what to do configuration wise on the PFSense box in Datacenter #1 to configure to route packets received on the OpenVPN tunnel to Datacenter #2 over the IPSEC tunnel? It could be a setting on the OpenVPN or some sort of static route or some such. Any ideas?

  Read the article

• zfs pool error, how to determine which drive failed in the past

  - by Kendrick

  I had been copying data from my pool so that I could rebuild it with a different version so that I could go away from solaris 11 and to one that is portable between freebsd/openindia etc. it was copying at 20mb a sec the other day which is about all my desktop drive can handle writing from the network. suddently lastnight it went down to 1.4mb i ran zpool status today and got this. pool: store state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://www.sun.com/msg/ZFS-8000-9P scan: none requested config: NAME STATE READ WRITE CKSUM store ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 c8t3d0p0 ONLINE 0 0 2 c8t4d0p0 ONLINE 0 0 10 c8t2d0p0 ONLINE 0 0 0 it is currently a 3 x1tb drive array. what tools would best be used to determine what the error was and which drive is failing. per the admin doc The second section of the configuration output displays error statistics. These errors are divided into three categories: READ – I/O errors occurred while issuing a read request. WRITE – I/O errors occurred while issuing a write request. CKSUM – Checksum errors. The device returned corrupted data as the result of a read request. it was saying low counts could be any thing from a power flux to a disk event but gave no suggestions as to what tools to check and determine with.

  Read the article

• Losing SQL connections

  - by john pavelka

  sql servr 2005 - Standard; one dedicated sql server (VM); windows server 2003; Small databases; About once a week we lose all sql connections. It seems to fix itself after about 5-10 minutes. System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. --- System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. We don't have a fully qualified DBA; it's kind of a joint effort here. Can somebody give me some general ideas for troubleshooting the network side and the application side? We already ran a few tuning profiles and ran through Database Tuning Advisor to apply indexing recommendations. It would sure be nice if there was a way to take a snapshot of what was running on sql server when these 100% cpu spikes occured, but sometimes we're not around. Is it common to throttle CPU for certain processes? Can this be done with Windows server 2003? For example, if security apps were making cpu spike to 100%, is there a way to limit their cpu usage? Any advice is appreciated. thanks,

  Read the article

• Power surge PC damage: How can I test all components of my PC without access to a second computer?

  - by Doug T.

  Ever since we had some crazy power surges last week my 64 bit Windows 7 PC has been acting strange. My USB network adapter disconnects from the wireless and can't detect the signal. I have to disable/reenable the adapter to detect it again. Also my wife has reported that the PC has rebooted a few times while I'm not sitting at it. Today I finally caught the reboot while I was using the PC. I got this blue screen of death. Stop Code 0x00000109: "Modification of system code or a critical data structure was detected." I followed the advice at the linked article and ran a memory test. I used memtest86 and its already found around 300,000 errors out of 8 gigs of ram. Now I'm worried -- what are the odds this is isolated to just my memory and not just a system wide problem? Isn't there a good chance that many other components are fried? More importantly, how can I test those other components? Are there tools similar to memtest I can use to test my motherboard/video card/power supply? If these are vender specific, is it typical for vendors to provide testing tools?

  Read the article

• Transfer iptables rules to another server (almost) real time

  - by MrShunz

  I'm running 2 cPanel servers with ConfigServer Security & Firewall plugin. One of the functions of the plugin is to block via iptables (temporarily and/or permanently) IPs which fail various authentications (POP3/IMAP, SMTP, FTP, webmail, mod_security and such). Now, i'd like to push those IP blocks to the border router to drop packets as soon as possible (and doing so protecting the other machines on the network). Keep in mind that after N failed logins IP is blocked for 5 minutes, then re-allowed. If multiple bans occours in an hour IP is blocked permanently and should be unlocked "by hand". So I need a near realtime solution. What I'm looking for is a better way than firing some cronjobs both on cPanels and border router to: dump the rules to file transfer the file to border router (via scp/sftp) load the rules from the file in the border router I'm aware that I will need some scripts to parse and modify the rules as cPanels have one ethernet interface and some aliases while border router has two ehternet interfaces and some loopbacks. All machines involved use Linux. EDIT as per @pjmorse comment. The plugin consists of a bunch of perl and config files. The part I'm intrested in is a process which scans logfiles (lfd) and installs iptables rules (and sends an alert email). Fact is, it upgrades quite often (one or two times a week) and itself is 7000 lines of perl so I'm not comfortable on tampering with it.

  Read the article

• Managed LAMP platform for maximizing availability and global reach, not scalability

  - by user66819

  Assume a Linux/Apache/MySQL/PHP application for a small base of registered users. With small userbase, there are no traffic peaks so the scalability that cloud platforms offer is not imperative. But the system is mission-critical, so availability is the primary goal. Users are also distributed across Asia, Europe, and US, so multiple server locations that minimize users' network hops would be highly desirable. The dream: a managed VPS platform where we would configure a single server (uploading PHP and other files, manipulating database, etc.), and the platform would automatically mirror the server in a handful of key places around the world (say one on each US coast, one in Europe, one in east Asia). File system synchronization and MySQL replication would happen automatically. Core operating system is managed, so we don't need to do full system administration and security, and low-level backups are also done by service provider, though we also do our own backups as well. Couple this with some sort of DNS geo-detection, so users are routed to the nearest operational server... with support for https, of course. Does such a dream exist? If not, what are some approaches to accomplish the same end with minimal time investment and minimal monthly hosting costs?

  Read the article

• SSO to multiple websites from Sharepoint website

  - by Aico

  We have an intranet based on Sharepoint 2010. In this intranet we have several links to other webservers within the same Active Directory, for example a link to our Outlook Web Access site on our Exchange 2010 environment. We have three different setups which visit this Sharepoint environment and the other webservers: Windows 7 clients that are a member of the Active Directory Home pc's that connect through a SSL VPN appliance Standalone thin clients (Windows 7 embedded) within the corporate network The goal is to let people only sign in once. In the first group this isn't a problem because the AD Integrated Authentication works fine and the Windows logon is passed on to Sharepoint and the other webservers. The second group is also working fine because of the LDAP integration that the SSL VPN appliance uses. The third group is however experiencing issues. They need to enter their credentials everytime they click a link to another webserver. They first need to enter credentials for accessing the Sharepoint environment. When clicking the link for their webmail they have to re-enter their credentials, and so on. Can someone tell me what the best solution would be to also get SSO working fine for the third group? Some extra information: We also have a Forefront TMG server in our environment. I read somewhere that Forefront might be part of a solution for this problem, but not sure how. Maybe someone here can help me? Look forward to some help. Best regards, Aico

  Read the article

• iptables rules to allow HTTP traffic to one domain only

  - by Zenet

  I need to configure my machine as to allow HTTP traffic to/from serverfault.com only. All other websites, services ports are not accessible. I came up with these iptables rules: #drop everything iptables -P INPUT DROP iptables -P OUTPUT DROP #Now, allow connection to website serverfault.com on port 80 iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT #allow loopback iptables -I INPUT 1 -i lo -j ACCEPT It doesn't work quite well: After I drop everything, and move on to rule 3: iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT I get this error: iptables v1.4.4: host/network `serverfault.com' not found Try `iptables -h' or 'iptables --help' for more information. Do you think it is related to DNS? Should I allow it as well? Or should I just put IP addresses in the rules? Do you think what I'm trying to do could be achieved with simpler rules? How? I would appreciate any help or hints on this. Thanks a lot!

  Read the article

• /etc/hosts: What is loghost? (fresh install of Solaris 10 update 9)

  - by cjavapro

  # # Internet host table # ::1 localhost 127.0.0.1 localhost XX.XX.XX.XX myserver loghost What is the purpose of loghost? If it was not for having loghost in there, all the /etc/hosts files on all the servers in this particular network could be identical. Edit: I looked at /etc/syslog.conf #ident "@(#)syslog.conf 1.5 98/12/14 SMI" /* SunOS 5.0 */ # # Copyright (c) 1991-1998 by Sun Microsystems, Inc. # All rights reserved. # # syslog configuration file. # # This file is processed by m4 so be careful to quote (`') names # that match m4 reserved words. Also, within ifdef's, arguments # containing commas must be quoted. # *.err;kern.notice;auth.notice /dev/sysmsg *.err;kern.debug;daemon.notice;mail.crit /var/adm/messages *.alert;kern.err;daemon.err operator *.alert root *.emerg * # if a non-loghost machine chooses to have authentication messages # sent to the loghost machine, un-comment out the following line: #auth.notice ifdef(`LOGHOST', /var/log/authlog, @loghost) mail.debug ifdef(`LOGHOST', /var/log/syslog, @loghost) # # non-loghost machines will use the following lines to cause "user" # log messages to be logged locally. # ifdef(`LOGHOST', , user.err /dev/sysmsg user.err /var/adm/messages user.alert `root, operator' user.emerg * ) Very interesting. when shutting down,, alerts go to all users probably through *.emerg * Looking at ifdef, it seems that the first parameter checks to see if current machine is a loghost, second parameter is what to do if it is and third parameter is what to do if it is not. Edit: If you want to test a logging rule you can use svcadm restart system-log to restart the logging service and then logger -p notice "test" to send a test log message where notice can be replaced with any type such as user.err, auth.notice, etc.

  Read the article

• Locate devices within a building

  - by ams0

  The situation: Our company is spread between two floors in a building. Every employee has a laptop (macbook Air or MacbookPro) and an iPhone. We have static DHCP mappings and DNS resolution so every mobile gets a name like employeeiphone.example.com, every macbook air gets a employeelaptop.example.com and every macbook pro gets a employeelaptop.example.com on the Ethernet interface (the wifi gets a dynamic IP from a small range dedicated for the purpose). We know each and every MAC address of phones and laptops, since we do DHCP static mapping (ISC DHCP server runs on linux). At each floor we have a Netgear stack of two switches, connected via 10GB fiber to each other. No VLANs so far. At every floor there are 4 Airport Extreme making a single SSID network with WPA2 authentication. The request: Our CTO wants to know who is present at which floor. My solution (so far): Every switch contains an table listing MAC address and originating port. On each switch stack, all the MAC addresses coming from the other floor are listed as coming on port 48 (the fiber link). So I came up with: 1) Get the table from each switch via SNMP 2) Filter out the ones associated with port 48 3) Grep dhcpd.conf, removing all entries not *laptop and not *iphone 4) Match the two lists for each switch, output in JSON or XML 5) present the results on a dashboard for all to see I wrote it in bash with a lot of awk and sed, it kinda works but I always have for some reason stale entries in the switch lookup tables, making it unreliable; some people may have put their laptop to sleep, their iphones drop connections after a while, if not woken up and so on..I searched left and right, we are prepared to spend a little on the project too (RFIDs?), does anybody do something similar? I can provide with the script if needed (although it's really specific to our switches and naming scheme). Thanks! p.s. perhaps is this a question for stackoverflow? please move if it so.

  Read the article

• File descriptor linked to socket or pipe in proc

  - by primero

  i have a question regarding the file descriptors and their linkage in the proc file system. I've observed that if i list the file descriptors of a certain process from proc ls -la /proc/1234/fd i get the following output: lr-x------ 1 root root 64 Sep 13 07:12 0 -> /dev/null l-wx------ 1 root root 64 Sep 13 07:12 1 -> /dev/null l-wx------ 1 root root 64 Sep 13 07:12 2 -> /dev/null lr-x------ 1 root root 64 Sep 13 07:12 3 -> pipe:[2744159739] l-wx------ 1 root root 64 Sep 13 07:12 4 -> pipe:[2744159739] lrwx------ 1 root root 64 Sep 13 07:12 5 -> socket:[2744160313] lrwx------ 1 root root 64 Sep 13 07:12 6 -> /var/lib/log/some.log I get the meaning of a file descriptor and i understand from my example the file descriptors 0 1 2 and 6, they are tied to physical resources on my computer, and also i guess 5 is connected to some resource on the network(because of the socket), but what i don't understand is the meaning of the numbers in the brackets. Do the point to some property of the resource? Also why are some of the links broken? And lastly as long as I asked a question already :) what is pipe?

  Read the article

• Setting up test an dlive enviornment - how?

  - by Sean

  I am a bit new to servers and stuff so had a question. I have my development team working on my website. They are in different countries and currently they put all the work live on the test site. But the test site is open to anyone who knows the URL. It is behind a directory but this effects my QA process because i cannot use the accurate URL structures to prevent the general public from seeing it. So what I want to do it: Have my site live on the net but only for me and my team, so like an internal network. Also I will need to mirror this to my live site when i put it live. So i guess this is something like setting up a staging and live environment. So how to do it and are both environments on the same physical server or do i need to buy two servers? And if i setup a staging environment how will i access it and my team since we are all spread out so i assume we need to log into something to access it? What about the URL - do i need a different URL for the test site or can i use the same live url for the test site? I plan to get a dedicated server + CDN for my site.

  Read the article

< Previous Page | 656 657 658 659 660 661 662 663 664 665 666 667  | Next Page >