Search Results

Search found 92070 results on 3683 pages for 'hyper v server 2008 r2'.

Page 663/3683 | < Previous Page | 659 660 661 662 663 664 665 666 667 668 669 670  | Next Page >

• Connection failed between Windows Servers

  - by Kerby82

  I'm setting up an infrastructure based on Windows Server 2012. The firewall is turned off and I can't access the Domain controller to check for the group policy. I'm experiencing some connection problem between servers. All the servers are running a site on the TCP Port 80 and I check with netstat that the web server is binding on every Ip of the servers. If i try to telnet from the server itself on the port 80 it works (using DNS name) if I try same telnet from another machine I get connection failed. The DNS works, the ping is successfull, the servers are on the same subnet, the firewall is turned off (even though windows advanced firewall says that some settings can be managed by the System Administrator, i guess group policy). I don't know how to troubleshoot further. Do you have any idea? Is that possible that the FW looks turned off but there are some group policy blocking the connections? (I also check group policy-Administrative Template-Network Connections- Windows FW everything is not configured) I need some hint on how to keep troubleshooting such a problem.

  Read the article

• Which SATA controller is better to use with Windows Server 2008 R2 64 bit?

  - by at8eqeq3

  We're preforming some hardware upgrade on our server machines. As a part of this process, we have to install some additional disk drives. Unfortunately, total number of drives will become 7 or 8, while all of our motherboards have only 6 SATA ports. Obviously, we need additional disk controllers. For now, we've tested Silicon Image (actually, no-name) and Adaptec controllers, both on SiI3132 chip, and got some problems with drivers for them: Silicon Image drivers are not installing at all, and Adaptec ones are installing, but the system says they're not signed and becomes unbootable. We're tryed both drivers from controllers' CD's and latest versions from manufacturers' websites, and no luck. So, can you recommend some SATA controllers that will really work without tambourine dances on mentioned OS (we need just 2 SATA ports and PCI-E, while RAID and any other features are no-matter)? Thanks for any help.

  Read the article

• configure HTTPS server on a cisco router

  - by Sara

  For the past week I was trying to configure an HTTPS server on a cisco 2900 router, I've used the following commands and assigned a username and password to privilege 15 however, when Im trying to access a given ip it requires a username and password however when I insert the username and password I configured it does not allow me to enter and i'm not sure where the problem is. Router(config)# ip http secure-server Router(config)# ip http authentication local These were the commands i used for the https server and also I used the following to assign the username and password Router(config)#username name privilege 15 secret 0 password where 'name' and 'password' represent the username and password respectively I'm trying to access the 192.168.14.1 interface on the router and the username and password i created are not authorized to enter (I got the commands from a cisco router manual)

  Read the article

• High load on a nagios server -- How many service checks for a nagios server is too many?

  - by Josh

  I have a nagios server running Ubuntu with a 2.0 GHz Intel Processor, a RAID10 array, and 400 MB of RAM. It monitors a total of 42 services across 8 hosts, most of which are checked using the check_http plugin even 5 minutes, some every minute. Recently the load on the nagios server has been above 4, often as high as 6. The server also runs cacti, gathering statistics every minute for 6 hosts. I wonder, how many services should hardware like this be able to handle? Is the load so high because I am pushing the limits of the hardware, or should this hardware be able to handle 42 service checks plus cacti? If the hardware is inadequate, should I look to add more RAM, more cores, or faster cores? What hardware / service checks are others running?

  Read the article

• Connecting to a LDAPS server

  - by Pavanred

  I am working on a development machine and I am trying to connect to my LDAP server. This is what I do - telnet ldaps- 686 then the response is - Could not open connection to the host on port 686 : connect failed But, the strange part is when I connect to my server - telnet ldap- 389 then the connection is successful. My question is, why does this happen? Do I have to install SSL certificate on the client machine where I make the call from? I do not know much about this. I know for a fact that the LDAP server is working fine because other applications are successfully using it currently.

  Read the article

• SharePoint 2010 deployment problem after added a new server to existing farm

  - by mrt

  I have SharePoint 2010 farm with one server. I'm developing some features in a sharepoint farm solution (not sandbox because there are some user rights problem). All feature scopes are set to "Site". I can deploy the solution to SharePoint with no problem. I added a new web front-end server to my existing farm. Then when I try deploy my solution, VS2010 shows this error: Error occurred in deployment step 'Activate Features': Feature with Id 'xxx' is not installed in this farm, and cannot be added to this scope I login with AD administrator account to development server. Administrator account is in site collection admins on the target web application. The farm account is in local administrators group. Is there a solution for this error?

  Read the article

• Advice for migrating email server

  - by Chris Adams

  Hi there, I'm planning to migrate a Zimbra server with about 200gb of data from a server hosted in an office into a datacentre, to increase uptime (we've had a couple of outages when our network here started flaking out, and we have people in other countries relying on this server too). However, I'm not sure how best to migrate the data into the data centre without rendering the connection unusable during office hours, because there's far too much to send in over night over the two meg upstream connection we have here. I'm familiar with using tools like nice to stop a long running process degrading machine performance - is there a simple way to throttle a connection between office hours, so the long running transfer doesn't block the pipe, but then opens up outside of office hours to make the most of the bandwidth? I'm aware the alternative here is to simply mail a hard drive to the data centre, but I'd like to avoid doing that if I could. We're using Centos Linux for our servers, in the office and the datacentre, so extra points for an open source linux answer.

  Read the article

• VNC unattended Server (No user Interaction)

  - by Louis van Tonder

  I worked on a proof on concept a while ago.... whereby I managed to get VNC going in full "unattended" mode... I.e. The VNC Server dials into the viewer... which is running in Listening mode. The same concept of how single click works, but without the user interaction. I cant seem to locate my source files for this concept I worked on... although I have found my shortcut that worked on the Viewer side to listen. "C:\Program Files\UltraVNC\vncviewer.exe" -listen 5007 /noauto /256colors I can not however remember/locate my demo of what the server is doing.... how to configure it. If I remember correctly, the server was also started with command line params that "dialed" into a remote IP/port, that the viewer is listening on. Any ideas? Thanks

  Read the article

• NFS-shared file-system is locking up

  - by fredden

  Our NFS-shared file-system is locking up. Please feel free to ask any questions you feel relevant. :) At the time, there are a lot of processes in "disk sleep" state, and the load averages on our machines sky-rocket. The machines are responsive on SSH, but our the majority of our websites (apache+mod_php) just hang, as does our email system (exim+dovecot). Any websites which don't require write access to the file-system continue to operate. The load averages continue to rise until some kind of time-out is reached, but for at least 10-15 minutes. I've seen load averages over 800, yet the machines are still responsive for actions which don't require writing to the shared file-system. I've been investigating a variety of options, which have all turned out to be red-herrings: nagios, proftpd, bind, cron tasks. I'm seeing these messages in the file server's system log: Jul 30 09:37:17 fs0 kernel: [1810036.560046] statd: server localhost not responding, timed out Jul 30 09:37:17 fs0 kernel: [1810036.560053] nsm_mon_unmon: rpc failed, status=-5 Jul 30 09:37:17 fs0 kernel: [1810036.560064] lockd: cannot monitor node2 Jul 30 09:38:22 fs0 kernel: [1810101.384027] statd: server localhost not responding, timed out Jul 30 09:38:22 fs0 kernel: [1810101.384033] nsm_mon_unmon: rpc failed, status=-5 Jul 30 09:38:22 fs0 kernel: [1810101.384044] lockd: cannot monitor node0 Software involved: VMWare, Debian lenny (64bit), ancient Red Hat (32 bit) (version 7 I believe), Debian etch (32bit) NFS, apache2+mod_php, exim, dovecot, bind, amanda, proftpd, nagios, cacti, drbd, heartbeat, keepalived, LVS, cron, ssmtp, NIS, svn, puppet, memcache, mysql, postgres Joomla!, Magento, Typo3, Midgard, Symfony, custom php apps

  Read the article

• How do I set "MaxPermSize" for Atlassian Fisheye/Crucible running as service on Win2k3?

  - by Jeremy

  I have been trying to setup Atlassian Fisheye/Crucible as a service on Win 2K3 R2 for two weeks. I keep getting various "java.lang.OutOfMemoryError: PermGen space" errors, which crash Fisheye and force me to restart the service. I've followed the example on the Atlassian support site to configure MaxPermSize within the service wrapper. However, when I check SysInfo inside the Fisheye Admin pages and the debug log, I don't see any confirmation. The Java Heap info is in both places, so I'd expect the MaxPermSize setting to show up in both places. The error is persisting and Atlassian support has been little help. I appreciate any help.

  Read the article

• Upload a directory recursively to an FTP server

  - by Nicolas Raoul

  I am writing a Linux shell script to copy a local directory to a remote server (removing any existing files). Local server: ftp and lftp commands are available, no ncftp or any graphical tools. Remote server: only accessible via FTP. No rsync nor SSH nor FXP. I am thinking about listing local and remote files to generate a lftp script and then run it. Is there a better way? Note: Uploading only modified files would be a plus, but not required

  Read the article

• Do all domains on the same shared hosting server have the same IP or ID

  - by silow

  Here's what I've got: siteA.com and siteB.com are hosted on hostgator. They're hosted on the same account of a shared hosting server (not VPS or dedicated). script.php is an external site that each of these 2 sites are accessing. I noticed that when siteA.com or siteB.com access the outside script.php, the script identifies them both as 1a.12.12ab.static.theplanet.com (apparently because hostgator uses theplanet.com servers). The fact that they're identified as the same value isn't surprising because after all they're hosted on the same account /home/user123/public_html. What I'm wondering about is how about other websites that are hosted on the same shared hosting server, but under other accounts. Basically other websites that are under another developer's control, but just happen to share the same hardware (hosting server). Do they also have the exact same identifier 1a.12.12ab.static.theplanet.com or that changes by account?

  Read the article

• Cannot acess the new cloned server even after new IP address assignment

  - by tough

  I was able to clone a Ubuntu 10.04 server residing in Cloud. It appeared that I was not getting some IP for the new VM so I followed some of these: # cd /etc/udev/rules.d # cp 70-persistent-net.rules /root/ # rm 70-persistent-net.rules # reboot I didn't follow the later commands as I was unable to see two eth MACs as available in the referenced site. After this I am able to see some the IP for it, and is different form the original IP, I have added new IP to DNS server. Now when I try to access it with its assigned(new) domain it is directed to the old server. I can see both the VMs running with different IP. Where I might have gone wrong, I am new to this admin thing.

  Read the article

• PHP/mail : server sends email originating from wrong domain

  - by Niro

  I have a Mediatemple dv (Plesk) server with two domains, each has static IP. I had domain1 as main domain and domain2 as secondary. When A PHP script from domain2 sends email the headers show the IP address of domain1 as the origin. Received: from domain2.com (domain1.com [70.ipof domain1]). I want only domain2 to be mentioned so I did the following: Changed server name to domain2.com made domain2.com the primary domain (about 30 hours ago) made fixed IP address of domain2.com the default address for the server. Still when the script sends emails I see the same info as above in the header. What do I need to do to make the email origin domain2.com?

  Read the article

• SCSI driver installation trouble

  - by Vicky

  I tried to install the driver of Adaptec 39320A-Ultra 320 SCSI card in Win2003 Server R2 SP2 in a DELL PowerEdge 2950 Server. I selected the driver from the list of drivers present in windows. But it says that the device could not be started(Code 10). I tried to put the card in a system that already had the driver installed. It worked fine. So there is no problem with the hardware. I even tried downloading the driver from the manufacturer website. When I try to select install from path and install that driver, it tell no matching driver found. When I install the default driver from windows, it shows the card in SCSI group of device manager, but with an ! symbol. Also the device ID in driver details was different from that of the one present in other system where it insalled fine. Any suggessions to solve it?

  Read the article

• Server responses "bus error" to every command

  - by Temnovit

  I have a linux machine dedicated to MySQL server with a pretty high load. Today I woke up and was terrified to see, that database server is down. I could connect to it via SSH, but it was responding with bus error to each and every command. [root@r1304 home]# ls Bus error [root@r1304 home]# tail /var/log/messages Bus error [root@r1304 home]# reboot Bus error [root@r1304 home]# free -m Bus error [root@r1304 home]# chkdisk Bus error I went to Data Center and did a hard reset, which seemed to help, but after a half an hour situation reapeated and now I can't even connet via SSH anymore. Any ideas what this could be? how to diagnose such a problem and what are possible fixes? Server has 32 GB RAM, 2xSSD drives with software RAID UPDATE According to Zabbix, when MySQL died, number of processes stated to increase drammaticaly, until I did a hard reset. What could those be? Number of processes

  Read the article

• Using mongodump with an auth enabled mongodb server

  - by bb-generation

  I'm trying to do a daily backup of my mongodb server (auth enabled) using the mongodump tool. mongodump provides two parameters to set the credentials: -u [ --username ] arg username -p [ --password ] arg password Unfortunately they don't provide any parameter to read the password from stdin. Therefore everytime I run this command, everyone on the server can read the password (e.g. by using ps aux). The only workaround I have found is stopping the database and directly accessing the database files using the --dbpath parameter. Is there any other solution which allows me to backup the mongodb database without stopping the server and without "publishing" my password? I am using Debian squeeze 6.0.5 amd64 with mongodb 1.4.4-3.

  Read the article

• DNS is resolving fine but can't access the server (unless changing /etc/hosts)

  - by victor hugo

  Hi all, I have a VPS server with a public IP, I added some A entries in my name server like svn.example.com - 1.1.1.1 Also I added some entries in my workstation /etc/hosts file in order to work with the domains meanwhile the DNSs were refreshed. It's been around 3 days from this and I configures everything in my server (using the hosts file), the DNSs are ready and I removed the entries but for my surprise I can access the servers nor anything in my domain or sub-domains (even a ping doesn't work). I've triple checked and the DNSs are OK. I don't know too much about DNSs . Any help would be appreciated. The IP address of my VPS is 74.63.223.43 I have these domain names, all pointing to the same IP (using A entries) hartoingenio.com www.hartoingenio.com svn.hartoingenio.com

  Read the article

• Connecting server to more than one switch.

  - by Jake

  I have 3 switches, one NEATGEAR GS748T and two JGS524. Initially I wanted to connect them in a triangle loop, but later suspect that the JG524 does not have spanning tree support. Now I have a Dell R710 with 2 NIC at the back. If I connect the server in between the two JGS524, which both in turn connect to the GS748T, will that consitute a loop? According to my limited understanding, with 2 NICs there will be 2 IPs for the server. Will the file server even work or not? Theoretically speaking, will this configuration increase the access speeds for clients? Thanks.

  Read the article

• Resilient Linux Mail Server Setup

  - by Coops

  How would people design a resilient mail server setup with Linux? On an application level what the system needs to provide is both an incoming and outgoing mail service (i.e. SMTP & IMAP), along with filtering and archive storage (the archive part isn't critical yet, so we'll look at this later probably). What is required on top of this is a resilient system, i.e. one which will handle individual server failures without interrupting service. As such I would term this a High Availability mail system. This is in contrast to a High Performance mail setup, as in our case the volume of mail being handled isn't the important factor, it's simply that it stays online. Having not approached this problem before, the first thing I thought of was a clustered file system (gfs/gluster/etc), combined with heartbeat to failover a floating IP to another box in the case of a server failure. Combined with postfix & dovecot does this sound feasible to people?

  Read the article

• Transcoding media server streaming to the iPhone

  - by pilif

  I have a huge collection of videos in different formats, but with one thing in common: They are not playable on an iPhone (or iPod Touch). Instead of complaining about Apple's IMHO broken world view ("there are no video formats but quicktime and mp4"), I wonder if there's a solution out there that allows streaming these different videos to the iPhone. This means that the source media needs to be transcoded on the fly. I already tried a few solutions out there, but with varying success: PS3 Media Server kind of worked, but only once and only for one single file. TVersity is said to work, but it requires UAC to be disabled and I don't see any need for this. The solution I'm looking for should run on Windows 2008 Server or Linux. I just can't believe that there's nothing out there that would allow me to stream my huge video collection on my iPhone (we're talking Wifi here, not 3G). After looking at the answers provided and after retrying TVersity without much success, I gave Orb another try and while the web interface failed to work for me, the iPhone Application (I tried the free one at first) actually worked flawlessly. And not only that, it also manages to convert the streams on-the-fly, so you don't have to wait for the transcoding process to finish before playback starts. On my 2.26 Ghz MacMini Server, this worked even with 1080p material. For Windows 2008 Server users out there: Remember to install the Desktop Experience Feature in the Server Manager if you intend this to work. Of all the stuff I had a look at, this really provided instant-success - even though I'm now probably sending the contents of my harddrive to orb's central server (sigh)

  Read the article

• How to setup a virtual machine in Ubuntu desktop to run Debian Server

  - by stickman

  I want to run a virtual machine in my Ubuntu desktop that runs a Debian server. The purpose of this is to generate Debian packages. I have some C++ applications that were originally developed on my Ubuntu machine, and I need to (re)compile them on a Debian server in order to: build Deb packages for deployment on a Debian server make sure that the applications will definitely work on a debian server The idea is so that I can do 90% of my development on Ubuntu (where I am more comfortable), and deploy a binary package that definitely works on Debian. BTW, I am developing on Karmic Kola (Ubuntu 9.10). [Edit] Following the advice I got so far, I have installed debootstrap and Debian 'Lenny' on /srv/chroot/debian_lenny on my machine. I am not sure this is the server version, but in any case I dont think that matters for my purposes (though it would be useful to know how to specifically install the server version). At the moment though, I am like a fish out of water, since there is no GUI, and it is only a console that I have in the chroot jail. I had a look in the home folder (I cheated, by using the KNavigator in Ubuntu), and there are no folders there - which presumably mean that no users have been set up as yet in the Debian "system". I would like to know how to do the following: Download and install the dev tools needed for (re)compiling my C++ apps Copy my projects from the Ubuntu "system" to the Debian "system" After building the binaries, I would like to create a debian binary package containing all of my binaries, so that I can install the package on a Debian server (my remote server)

  Read the article

• Server reboots every 4.5-5.5 minutes...

  - by Andy

  Hi, I've recently installed a server in colocation, and my server is rebooting every 4.5-5.5 minutes. Regardless of the OS I run, it reboots. I have all ECC memory in the server, so it should correct errors if there is a bad bit in the memory, right? It's weird because it always happens about 4.5-5.5 minutes after bootup. My motherboard is a Supermicro X8DTL-iF. I read on a blog that another person had the problem, and supermicro recommended to do a BIOS update. Is this the right course of action?

  Read the article

• Cached css/javascript files on Sun Java System Web Server

  - by Derp

  I'm doing front-end web development in a Solaris 10 / Sun Java System Web Server 7.0U2 environment. I have noticed that changes to static css or javascript files often do not take effect immediately, whereas changes to static html files always do. My best guess is that a default setting in the web server causes it to cache certain file types in order to provide reasonable performance out of the box. I don't have the admin server running--I'll need to edit the config files by hand. What change(s) can I make so that all of my css and javascript edits take effect immediately? Thanks!

  Read the article

• SMTP Server Issue in intersystem cache

  - by nayanak

  I am facing an issue when I am sending Email from intersystems cache. I am able to send the mail, with out any problem the first time. But the second time when I am trying to send the smtp server is not responding properly. The first Helo command is sent. I recieve the confirmation 220 from the server. But I do not recieve the Message 250. So the next command is giving me the error 503, 5.5.2 "Send helo first" message. I am unable to find out why the server is not responding the second time.

  Read the article

< Previous Page | 659 660 661 662 663 664 665 666 667 668 669 670  | Next Page >