Search Results

Search found 32598 results on 1304 pages for 'ubuntu touch'.

Page 665/1304 | < Previous Page | 661 662 663 664 665 666 667 668 669 670 671 672  | Next Page >

• SSD on USB 3.0 doesnt always mount

  - by juergen

  I would like to ask you for some support for this issue. The SSD I use is apparently slightly damaged. Atm it shows this popular Corsair Series 3 problem. symptom: the disk is working for some minutes and then just suddenly stops. Two months ago it worked like a charm. This was my boot device in these days. So now I still need to copy some data out of the device which leads me to my question. Usually the SSD is working again for some minutes, when i unplug and replug its power. It gets detected by the system again and I can continue my backup. The problem on Ubuntu is, that it is not recognized again after two or three replugs. I have to reboot to bring it back. To specify this situation: when i unplug and replug my USB mouse before i reboot it is not recognized as well. So something seems to be wrong with the system also. my question: how do i fix this rebooting issue? I will post all the logs you need to analyse. The problem doesnt depend on the interface. I tried USB3.0, 2.0 and Sata already. Thank you! cheers my system: Ubuntu 11.10, Gigabyte G41MT-S2P, Intel E6750 Corsair Force Series 2 - F120, Digitus USB 3.0 Adapter, USB 3.0 interface card

  Read the article

• how do I fix ati driver issue

  - by Michael

  I have little knowledge about ubuntu, but I am learning. Recently, my ubuntu 12.04 required that I update. I noticed that it was updating xorg and other things, after the update I was asked to reboot. I did. now when I start that computer up, it cannot detect any display and refuses to boot from usb. I have no idea how to recover my computer. It simply starts in what is akin to the terminal program and ask for my username and password. After that, I can enter commands. The problem may be because I manually installed drivers by copy pasting from some instructional that I now have no idea where they are, but what it amounts to is that I "built" the drivers. They were working GREAT until this update. I did this because otherwise I was unable to have sound through my hdmi. After I hand built the drivers, they worked great. After this update Ka-blam! nothing... Also, I had okay-ed lots of update sources (though all of them [xorg and such] were the stable versions, not the unstable update sources) Please help and thank you in advance. (if this is posted incorrectly or misplace, please let me know what to do)

  Read the article

• Intel N10 graphics

  - by Rapsag1980

  Español: Buen día. Instalé en una notebook ubuntu 12.04 pero me da el problema que solamente me da dos resoluciones de pantallas 800x600 y 1024x768... En la primera se ve muy grotesca la pantalla y en la segunda se ve bien, pero falta un pedazo de pantalla arriba y abajo... He tratado de buscar información sobre el tema pero parece uno de esos "bugs" que no han conseguido ser erradicados... Intenté hacer el Xorg.conf y esas cosas y nomas no se puede... Recurro a su sapiencia y experiencia en este tipo de problemas... La mini es una Lanix Neuron lt, procesador intel atom n450 y la tarjeta Intel corporation N10 family integrated graphics controller.... Inglés: Good day. I installed ubuntu 12.04 on a notebook but I get the problem that only gives me two screen resolutions of 800x600 and 1024x768 ... The first screen looks very grotesque and the second looks good, but missing a piece of screen up and down ... I tried to find information on the subject but it seems one of those "bugs" that have failed to be eradicated ... I tried to do the Xorg.conf nomas and stuff and you can not ... I appeal to your wisdom and experience in this kind of problem ... The mini is a Neuron Lanix lt, Intel Atom N450 processor and the Intel integrated graphics family corporation N10 controller ....

  Read the article

• Why does my mic boost automatically go to 100 on every boot?

  - by Ben

  When my computer turns on, it automatically sets the "mic boost" sound setting to 100. This causes a loud static sound in my speakers. I can manually go to alsamixer and turn the mic boost down manually, but I would prefer it if I didn't have to do this every time I turn the computer on. I've tried running sudo alsactl store after fixing the settings, and this does save them, but I have to run sudo alsactl restore to restore the settings. This means that I have to manually fix the sound every time I start the computer anyway, so it isn't really a fix. I tried putting sudo alsactl restore in my startup programs, but that didn't seem to fix anything. I'm running Ubuntu 12.04, but I started having this problem before upgrading from 11.10. I'm using a Sony Vaio laptop. I'm not really sure what made it start; it seemed like I just started having the problem randomly one day. Any help would be appreciated! Edit: here is the output from running amixer: http://paste.ubuntu.com/1060080/

  Read the article

• x server startx error?

  - by Chris

  root@thewhitewox:~# startx X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-29-server i686 Ubuntu Current Operating System: Linux thewhitewox 2.6.18-238.9.1.el5.028stab089.1 #1 SMP Thu Apr 14 14:06:01 MSD 2011 i686 Kernel command line: quiet Build Date: 20 October 2011 03:05:54PM xorg-server 2:1.7.6-2ubuntu7.10 (For technical support please see ww w.ubuntu . com/support) Current version of pixman: 0.16.4 Before reporting problems, check http: //wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 15 00:50:32 2011 (==) Using config directory: "/usr/lib/X11/xorg.conf.d" Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) Please consult the The X.Org Foundation support at http ://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log What does this mean and how can I fix it?

  Read the article

• Synaptics touchpad sensitivity. Issue?

  - by Dave

  Just installed 12.04 LTS and I experience some problems with my touchpad. Everytime I tap/double tap the touch the cursor is moving around (not static as should be) (for example if I want to close a window, I click on "x" button from touchpad, the cursor is moving and not always hit the "x" button). Touchpad buttons left click, right click are working well, but tap not. Did u guys experience the same problem? Is there something related to sensitivity? How to fix it? PS: on Ubuntu 11.10 didn't had this issue

  Read the article

• File browsing on Nautilus extremely slow after upgrade to 12.04

  - by Tobelli

  One month ago I updated (no fresh install) to 12.04. Since then nautilus got extremely slow. When I open a folder that contains many subfolders I sometimes have to wait 4 seconds until everything is displayed. This has never been like that before, in previous versions I could always browse between my files extremely fast. I looked in "additional drivers" and changed from Nvidia current-version-update to the recommended drivers. This drastically increased the performance and speed of file browsing, unfortunately just for a couple of days. Now I am stuck again with the very slow Nautilus. I also tried to install the latest nvidia driver like it was suggested here: http://www.techlw.com/2012/03/install-nvidia-drivers-on-ubuntu-1204.html Did not work at all. Also when using the dash to try to find files it does not respond properly: does not find files or loads for ages until the file is displayed. I am working on an Acer Notebook with Intel® Core™ i5 CPU M 430 @ 2.27GHz × 4 6GB RAM GeForce GT 320M/PCIe/SSE2 64 Bit Ubuntu 12.04

  Read the article

• No monitor output after fresh install of 11.10 64-bit

  - by James

  I have a machine with a Nvidia 8600GT graphics card and a CRT monitor. Previously, I have only used Windows on it, and the graphics card seems to be working correctly in Windows 7. I booted up and installed Ubuntu 11.10 amd64 from the LiveCD and the whole process worked perfectly. When I tried to boot off the hard disk for the first time, the output to the monitor switched off during the splash screen, and this happens consistently. I can ctrl-alt-f2, so I tried an apt-get upgrade, which didn't help; nor did apt-get install nvidia-current. There is nothing that looks relevant in dmesg. Booting with the nomodeset option has no effect. Following the answers in this similar thread, I tried apt-get purge nvidia-173. Both startx and service lightdm start just say the service is already running. Does anyone know how to find out what the problem is? I was wondering if it is just that Ubuntu is trying to use a resolution that the monitor doesn't support, but I can't find out how to change that from the command line.

  Read the article

• Rhythmbox iPod Issues?

  - by Jonathan Jones

  basically, when I try and drag a song from my library to any one of my iPods (Classic (2.0.4 Mac), Touch (3.1.2. (7D11)) and Shuffle), nothing happens. It would appear that everything went ok, but... when I go to the iPod's library, the song is not there. When trying to transfer the file, there is no error etc. to suggest something that went wrong, and so I can't file a bug report on Launchpad etc. Does anyone know what could be wrong? Cheers guys! EDIT: I forgot to add that I'm running a 64-bit install of Ubuntu 12.04LTS and that Amarok and gtkpod don't even recognise that any devices are plugged in. Thanks.

  Read the article

• Cannot access windows share

  - by Wrigley

  I have an accounting program specifically tailored to the IT industry, its called Fincon (exe based). It basically works on a client to server directory base system. the server is currently running on a windows 7 machine with a NTFS partition. I have installed Wine. Have the shared Windows directory mounted with what I assume is the correct command for such being (mount -tsmbfs //servername/sharedir /mnt/fincon -0 usename=username,password=password). I can see the shared dir although it does take a bit long to access it on the Ubuntu machine via the mapped directory but instant via normal network browsing. I have also set up the mapped directory to my D: drive in Wine and have pointed the fincon.ini to read server field from D: directly. Here's my issue, it seems that for some odd reason I cant write to the mapped directory from Ubuntu, yet I can with my Windows machines, the permissions are set correct on the Windows 7 share and I really dunno what I'm missing. I'm quite a Linux noob just switched yesterday. Thanks guys for any help in this would be quite appreciated. As I'm pulling out my hair here and really want to migrate my work PCs to a Linux OS as it just gives less issues than Windows does ever.

  Read the article

• LAMP setup - phpmyadmin says the mysqli extension is missing (but its listed in phpinfo)

  - by WebweaverD

  I regularly set up virtualbox ubuntu setups to run as local webservers. I have set these up several times and never had an issue. Recently I have been cloning them but wanted to do a fresh install this time in the hopes of fixing some niggling problems which have propagated through my setups. However, something has changed: 1)vb guest additions no longer allow me to copy and paste (i'll worry about that later) 2)more importantly phpmyadmin no longer works as installed - Initially going to localhost/phpmyadmin gave a message that the page could not be found. So I have followed some instructions (sorry I know its vague I cant find them now) which have created a phpmyadmin directory in /var/www but now I get an error saying: the mysqli extension is missing. If I run phpinfo mysql and mysqli are listed. All I have done so far is install apache2 (working) install php5 (which I think used to come with apache) Install mysql server (and client for good measure) and install phpmyadmin I found a post of a similar question which suggested I should install php5-mysql (done) and edit php.ini and uncomment the line extension-mysqli.so - this is not there, so I tried adding it with no joy. I have restarted apache and still no joy on phpmyadmin. Any help is much appreciated as this is driving me nuts. Why the change for the worse - I was just starting to like linux! I'm running a windows 7 machine and the guest os is ubuntu 12.04 - I ran apt-get update before doing anything so all packages should be the latest versions.

  Read the article

• How can I get SLI working with 295.40?

  - by Steve

  I've been doing a lot of googling these last few hours and I'm not having much luck. Perhaps I don't know exactly what I am looking for. I just recently installed Ubuntu 12.04LTS x86_64. Looks beautiful! I have two GTX470's in SLI, and I am finally migrating my desktop over given the hopeful gaming support as of late. My laptop has been enjoying multiple distros of Ubuntu for a couple years now. However, new problems come with unexplored territory, here. At first, I only had one working monitor of my two. Over on nvidia-xconfig I fixed that, but the only solution that actually worked was twinview. Just recently I read here that twinview is not compatible with SLI. Sweet. When I try to tell it, oh hey, use a separate XScreen, configure it the way I want it, click save to configuration file, enter my password, then a sudo restart lightdm, it's broken. One screen blacks or whites out (Couldn't tell you the specific conditions for each, I'm dubious at this point,) and I get this huge error dialogue box upon login. Something about incompatible resolutions if I remember right. Though I am sure I set the resolutions for each screen correctly. Anyway, when I try to enable SLI (sudo nvidia-xconfig --sli=On) despite the fact it hates twinview, unity breaks. The sidebar is there, but only one screen works, the mouse is trapped running along the left edge of it, and the background of the sidebar is a solid blue. Anyway, this ended up being entirely too verbose, I'm sorry, but could anyone part some wisdom please? It would be appreciated!

  Read the article

• bash terminal/console strange overlapping behavior

  - by UpKey

  I am using gnome-terminal in Ubuntu 11.10 and seem to get long lines overlapping in the terminal window. When I copy a long command line and paste it into the terminal, the text gets overlapped to the start of the line and often covers the user prompt. If I resize the terminal window, making it wider the overlapping gets undone and everything looks normal. In previous versions of Ubuntu, if a line was too long it would continue on the next line below. Another problem I have noticed that may be related, is when using the up arrow key to show previously typed commands, sometimes instead of the output command line being replaced by the previous command each time the key is pressed, the lines get partially merged. A portion of the old line remains, and the next command gets joined onto the end. This leftover part of a command is persistent and does not get replaced next time the key is pressed, although the insertion point or blinking cursor is at the end of the latest recalled command, and the leftover has no effect if I press enter. Is this problem a bug or some setting that needs fixing? Where do I look for the cause? keyboard? gnome-terminal? bash? Thank you for any help or suggestions offered

  Read the article

• How to create a bootable system with a squashfs root

  - by cldfzn

  My goal is to be able to take a customized root file system loaded with the software I want. So far I've created a squashed filesystem using debootstrap and chroot to install the software I want on the system. The problem I am now running in to.. whenever I boot in to the system, my user accounts that were set up in the chroot do not work. First boot everything works out, second boot I can't log in. That is baffling to me. Any one know a reason or a place to start looking? Update To get a working system with a squashfs filesystem: sudo apt-get install live-boot live-boot-initramfs-tools extlinux sudo update-initramfs -u Create a squashfs file from a bootstrapped or running ubuntu filesystem with whatever packages you want available. https://help.ubuntu.com/community/LiveCDCustomizationFromScratch provides good instructions for creating a debootstrapped system to build on. Format the target drive with ext2/3/4 and enable the bootable flag. Create the folder layout on the target drive and install extlinux: mkdir -p ${TARGET}/boot/extlinux ${TARGET}/live extlinux -i ${TARGET}/boot/extlinux dd if=/usr/lib/syslinux/mbr.bin of=/dev/sdX #X is the drive letter cp /boot/vmlinuz-$(uname -r) ${TARGET}/boot/vmlinuz cp /boot/initrd.img-$(uname -r) ${TARGET}/boot/initrd cp filesystem.squashfs ${TARGET}/live Create ${TARGET}/boot/extlinux/extlinux.conf with the following contents: DEFAULT Live LABEL Live KERNEL /boot/vmlinuz APPEND initrd=/boot/initrd boot=live toram=filesystem.squashfs TIMEOUT 10 PROMPT 0 Now you should be able to boot from the target drive in to your squashed system.

  Read the article

• How do I write to an outer truecrypt volume when the inner volume protection prevents writng?

  - by con-f-use

  In a nutshell After some time using the outer volume of a hidden volume in Truecrypt I cannot write to the outer volume anymore. The protection of the inner volume always kicks in before. How do I fix this? Details I'm using truecrypt's two layered encryption of a USB stick. The outer container carries my semi-sensitive stuff while the inner hidden values has a bit more valuable information. I use both, the inner and outer volume regularly and that is part of the problem. Truecrypt can mount the outer volume for writing while protecting the inner. Usually the inner volume, when not protected this way (or mounted read-only) would be indistinguishable from free space. That is of course part of the plausible deniability scheme of truecrypt. At the beginning, everything worked as expected. I could copy and delete data to the outer volume as I pleased. Now it seams that I have written and deleted enough data to have filled the outer volume once. Despite the write protection Ubuntu tries now to write to the continuous "free space" that is the inner volume. It does that although enough other free space is on the outer volume. But on this free space there used to be data so its fragmented and the file system write prefers continuous space. The write on the continuous free space of the outer volume of course fails (with the error message in the picture above) as Truecrypt's inner-volume-protection kicks in. The Question I know this is expected behaviour, but is there a better way to write to the outer volume that does not attempt to write to the hidden free space at the end? The whole question could be more generally rephrased to: How do I control, where on a partition data is written in Ubuntu?

  Read the article

• Totem crashes immediately after startup in 12.10

  - by Sakib Hasan

  I did a fresh install of Ubuntu 12.10 and did sudo apt-get update && sudo apt-get update. Then I installed ubuntu-restricted-extras, audacious and vlc from Software Center. After that I tried launch Totem Movie player but in terminal following error comes up: (totem:9295): Gdk-ERROR **: The program 'totem' received an X Window System error. This probably reflects a bug in the program. The error was 'BadDrawable (invalid Pixmap or Window parameter)'. (Details: serial 1808 error_code 9 request_code 152 minor_code 9) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the GDK_SYNCHRONIZE environment variable to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) Trace/breakpoint trap (core dumped) I tried purge and again install. But the error remains. What should I do?

  Read the article

• Error while installing an application

  - by Bong.Da.City

  So i have installed synaptic package manager.. via it, i have checked once libopencv-highgui-dev and applied complete removal.. after that i installed it... now everytime i try to install an application e.g Format Junkie sudo add-apt-repository ppa:format-junkie-team/release && sudo apt-get update && sudo apt-get install formatjunkie in the command install format junkie it gives me that error everytime: sudo apt-get install formatjunkie Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libopencv-features2d-dev : Depends: libopencv-highgui-dev (= 2.3.1-11ubuntu2) but it is not going to be installed E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. What should i do? And 2nd what did i did wrong so it won't happen another time? output of lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.10 Release: 12.10 Codename: quantal

  Read the article

• How to disable discrete GPU using NVIDIA drivers?

  - by penzoiders

  I have a DELL studio XPS 13 (aka 1340) as of 12.04 most things run smoothly out of the box, but I have some power draining and warmness issues (if not to be called terrible heat issues) The system came with a NVIDIA GeForce 9500M (which has Hybrid SLI) and it shows up in "lspci" as these 2 cards 02:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 9200M GS] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400M G] (rev b1) I had to install nvidia-current over noveau driver 'cause noveau does freeze the system after suspension. By installing nvidia-current and running nvidia-xconfig the resume process after suspension is fixed. By the way both with nvidia-current and noveau the system drains a lot of battery and heats up a lot. I suppose this is because the discrete GPU is always on. I don't really need 3D graphics on this system, if not the minimal to run unity and compiz for window management. So my question is: How do I disable, using nvidia-current, the discrete GPU 9200M and use only the integrated one 9400M? notes: In BIOS I have no option to disable discrete GPU This I think is not applicable because of the suspension-freeze issue (with noveau): https://help.ubuntu.com/community/HybridGraphics I've found this but I don't know which --sli option I should choose to fit my needs: http://manpages.ubuntu.com/manpages/hardy/man1/nvidia-xconfig.1.html My system has not optimus or cuda, but anyone can tell me if bumblebee can work for me?

  Read the article

• Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

  - by user42424

  So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

  Read the article

• How to make ip Address static (eth0)

  - by Jordan Angelucci

  I'm having a really hard time configuring ubuntu 13.04 to have a static ip address. I have tried multiple solutions but everytime I reboot (can't do the network reset command because ubuntu freezes) I end up with no connection. Here is what I get when i type ifconfig into the terminal: eth0 Link encap:Ethernet HWaddr 10:bf:48:bc:07:cb inet addr:192.168.0.8 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::12bf:48ff:febc:7cb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1763067 errors:0 dropped:0 overruns:0 frame:0 TX packets:1024326 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2284491220 (2.2 GB) TX bytes:136809317 (136.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1840 errors:0 dropped:0 overruns:0 frame:0 TX packets:1840 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:185688 (185.6 KB) TX bytes:185688 (185.6 KB) I have also tried this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.160 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 dns-nameservers 24.222.0.94 dns-nameservers 24.222.0.95 If anyone could help me it would be very much appreciated.

  Read the article

• 12.10 Wireless networking

  - by user108594

  I downloaded ubuntu 12.10 using WUBI and cannot connect to the internet. I removed it and downloaded ubuntu 12.04 still cannot connect. This I assume rules out the program being the problem. I reinstalled 12.10. When loaded I get the same message W/red (x) stating Internet not connected. I went to the Settings drop down box and it does not reveal the network list but (enable networking has a ck mark). Am running a HP Laptop with a w/7/64 OS that has a kill switch that indicates (orangeno connection) I downloaded 12.10 on my desktop (on the same network) and everything OK. I tried to follow the instructions in the help menu but got lost and confused . Sincerely Dan Additional Info per request Broadcom 802.11b/g Wlan Internal pc [hp laptop] P.S. I've been out of town for about a month. TKS for your gitback I did install 12.10 via cd and everything ok,but retried alongside 7 and unable to connect to internet,also took laptop and hard wired using ethernet cable and everything ok. stumped again and running out of ideas!!!

  Read the article

• NFS users getting a laggy GUI expierence

  - by elzilrac

  I am setting up a system (ubuntu 12.04) that uses ldap, pam, and autofs to load users and their home folders from a remote server. One of the options for login is sitting down at the machine and starting a GUI session. Programs such as chormium (browser) that preform many read/write operations in the ~/.cache and ~/.config files are slowing down the GUI experience as well as putting strain of the NFS server that is causing other users to have problems. Ubuntu had the handy-dandy XDG_CONFIG_HOME and XDG_CACHE_HOME variables that can be set to change the default location of .cache and .config from the home folder to somewhere else. There are several places to set them, but most of them are not optimal. /etc/environment pros: will work across all shells cons: cannot use variables like $USER so that you can't make users have different new locations for .cache and .config. Every users' new location would be the same directory. /etc/bash.bashrc pros: $USER works, so you can place them in different folders cons: only gets run for bash compatible shells ~/.pam_environment pros: works regardless of shell cons: cannot use system variables (like $USER), has it's own syntax, and has to be created for every user

  Read the article

• How do I remove the tool tips on the launch bar?

  - by Sephethus

  The title is the question. These tool tips stay until I try to click past them. They're annoying since they constantly pop up and block the view of what I'm trying to do. Unfortunately I need the launch bar because Ubuntu is running on VMware and the console does not allow me to use the keyboard for switching tasks (to my knowledge). How do I disable them? I'd post an image as an example, but this site will not let me. UPDATE: unity 5.16.0 UPDATE 2: I discovered that this may only be a problem with users who run Ubuntu on a full screen VMware console that is situated on the right monitor. When the mouse is moved to the left monitor the tooltips popup and remain until the mouse is clicked twice in the VMware console window to make it active. Unfortunately my problem is one involving a rare situation I think. However, I'd love to be able to disable these tool tips if possible. It would also be nice if new features were added that can allow further customization of the launch bar.

  Read the article

• How do I install the latest version of Mupen64?

  - by Uikri

  Alright, I can't figure out how to install Mupen64 on Ubuntu 12.04. I'm gonna be moving in ~2 days with no internet connection for an indefinite amount of time, so that's why I'm asking for answers here instead of figuring it out myself (I don't have time right now to sit and fiddle with figuring out emulators). I'd like to know how to properly install the latest version of Mupen64 (Stable. No beta or anything like that) and how to be able to use a controller with it. I've heard rumor that the latest version of M64 no longer has a GUI, but that there are ways to add a GUI to it after installation, so I'd also like to know how to add the Mupen64Py UI to it. I am not totally Ubuntu savvy. I do not know how to compile stuff from source, I don't necessarily know a lot of terminology, I'm not very handy with the terminal, etc. So it would be helpful if you explain each step in an easy to understand manner. Thanks in advance to anybody who helps out. EDIT: I've already seen How do I install mupen64plus?, just so you guys know. I just need instructions that are more detailed. Also, thanks for the edit, Jorge Castro! I guess I really should have properly formatted my question ^^;

  Read the article

• Update Manager got stuck (but not frozen) while installing downloaded updates. What should I do?

  - by WarriorIng64

  I have just gotten my Ubuntu 12.04 LTS desktop computer reassembled after a trip back home and connected it to my parent's wireless Internet connection. The connection seems quite shaky (disconnects half the time, likely an ongoing issue with the wireless card I have installed), and it struggled to download updates because of the constant interruptions. Eventually, it managed to download the updated packages and started installing them. I got up and left it to do its work. When I came back, I saw it was still having trouble staying connected to the wireless (no surprise there), but then I noticed that it seemed like Update Manager had stopped making progress on the installation. I opened the Details pane to see what it was last doing: My guess was that the installation script for flashplugin-installer couldn't complete the download until I stabilized the Internet connection. I hooked my Ubuntu laptop up to my desktop via Ethernet and shared its wireless connection using this guide, and as I am typing this now from my desktop you can see that the connection issue was successfully worked around. However, even with a stable connection established, Update Manager seems "stuck" at its current position and won't go any further. It's not totally frozen, but I can't do anything beyond open/close the Details pane as the Cancel button is grayed out. I know it can cause big problems if updates are stopped during installation, but I'm at a loss as to how this situation should be handled. I'm sure it should finish normally if I can just find a way to restart Update Manager, but the question is how this should be approached. How can I safely get my updates to finish installing?

  Read the article

< Previous Page | 661 662 663 664 665 666 667 668 669 670 671 672  | Next Page >