Search Results

Search found 74687 results on 2988 pages for 'work from home'.

Page 667/2988 | < Previous Page | 663 664 665 666 667 668 669 670 671 672 673 674  | Next Page >

  • VirtualBox - Mac OSX host Win7 guest - no Internet access for guest VM

    - by nodelayheehoo
    I have a Mac running OSX 10.9.2, and I just downloaded and installed a Win7 IE9 VM in VirtualBox. My Mac uses Wi-Fi for internet access, and it's behind a proxy (it's a work machine). VirtualBox loads the VM fine, and at some point the VM can see the DNS servers of the host. But I've never been able to make the VM have internet access. I've tried all kinds of combinations of Network settings on the VM via the VirtualBox Settings, in conjunction with Internet Sharing in OSX's System Preferences, but no luck. Has anyone done a similar setup and made the VM successfully connect to the Internet? Thanks in advance for any inputs. [ Update: I was able to get internet access for the VM when the host was using my home network. When I ran the VPN software to connect to the work network, the internet access went away again.] (Initially posted this on stackoverflow.com, but it was put on hold as off-topic by several users, and was advised to ask here instead)

    Read the article

  • Limit vsftpd upload to a given set of file-names

    - by Chen Levy
    I need to configure an anonymous ftp with upload. Given this requirement I try to lock this server down to the bear minimum. One of the restrictions I wish to impose is to enable the upload of only a given set of file-names. I tried to disallow write permission to the upload folder, and put in it some empty files with write permission: /var/ftp/ [root.root] [drwxr-xr-x] |-- upload/ [root.root] [drwxr-xr-x] | |-- upfile1 [ftp.ftp] [--w-------] | `-- upfile2 [ftp.ftp] [--w-------] `-- download/ [root.root] [drwxr-xr-x] `-- ... But this approach didn't work because when I tried to upload upfile1, it tried to delete and create a new file in its' place, and there is no permissions for that. Is there a way to make this work, or perhaps use a different approach like abusing the deny_file option?

    Read the article

  • add printer on windows 7 with vbscript and wmi

    - by Jessica
    I have a problem where I can't add a printer on my Windows 7 machine, because it fails with "The printer driver is unknown" (error code 1797) using WMI/VBScript. The thing is that the printer driver already exists on the PC. I've used AddPrinterConnection to connect to the remote printer queue, and the drivers get installed. I've confirmed they exist by a) Enumerating Win32_PrinterDriver with WBEMTEST utility which shows the driver, and also in the Printer Management MMC snap-in. Is there some other scriptable way I can get this to work? I'm adding a local TCP/IP port, pointing my new printer object instance to use that port and the driver from using AddPrinterConnection, and giving it a name, but it refuses to work...

    Read the article

  • Why is the installation of certain programs always such a pain in Linux [closed]

    - by Saif Bechan
    I am new to Linux and I am trying to set up a server. For this I sometimes to need to install special software, but the installation of this is always such a pain. For example I wanted to try the htscanner to see if it did the job for me. When i got to the page there is NO INSTALLATION guide. I had to search for the right one on google. Even on google its a pain to find the right method. Just try it - google search.After a long search and tried different things I finally found out that I had te install some more software before it will work. The website says that the version I used did not had any dependencies. Thats a lie. Release0.8.1: No dependencies registered. You do need certain things for it to work. After managing to set it up it still didn't work I can't figure out why because there is no official guide on the website. So I wanted to just uninstall it and find a better solution. Uninstalling. Uninstalling something in Linux is a real mystery how this actually works. The best answer I got is to manually look for the files and delete them. Whats up with that! There is never something said about uninstalling on the websites. Even on the website of CentOS itself it tels you how to install something like rpmforge packages (it's a miracle they tell you and not have to google it) but there is no mention of what to do when you want to uninstall. Why not? The forums you get on when trying to solve your problem are most of the time in plain text, and you have to scroll trough huge error logs before you see somethings that vaguely resembles your question if you are lucky. The Question My question is if there are any recommended websites / forums that explain the basic concepts of installing and uninstalling software on Linux. And explain other useful operations. And not Wikipedia or the first hits of Google, I have been there already. I am looking for some easy to read trough guides on these operations on Linux. I have been on a lot of websites that explain some Linux operation, but I bet its easier to get a degree in rocket science than to read trough the website and understand what they try to say.

    Read the article

  • iptables to play nice with tor and ntpd

    - by directedition
    I'm setting up a server to operate as a tor relay and nothing else. I setup iptables to only allow talk on port 9001 and it worked fine, but there was an issue, the clock needs to be properly set and maintained for the relay to work properly, so I needed ntpd setup and running, but for some reason I can't get iptables to work as I want it. I'm trying to have it allow only tor and ntpd to talk over the network, but when I set it up to allow port 123 using udp, suddenly it ignores my -A OUTPUT ! -s 127.0.0.1 -j DROP and allows everything through. How should I go about this? Please excuse my ignorance, I've brand new to iptables.

    Read the article

  • Forward one RDP port on one machine to multiple external users at the same time

    - by matnagel
    We have a windows server 2003 machine with rdp service listening on the standard port 3389. For security reasons this port is not opened on the router, but we have freesshd service running and a remote admin can login via ssh and this port is forwarded to external port 33001 for the first external user. This works great. Now we have another admin who wants to work remote (he uses a different windows account, but needs to work on the same machine.) So this is basically a ssh port forwarding question. Will the other user be able to login at the same time using the same port 33001 ? Please keep in mind that there will be a second tunnel, and this second tunnel will also use the local port 3389 on the windows server.

    Read the article

  • Wiimote accelerometer input on Windows? (in 2013 - Glovepie alternative?)

    - by user568458
    There were a few options for getting accelerometer input into Windows using a Nintendo Wiimote. As of mid 2013, these projects seem to be dead, corrupted with malware, or both. Are there any tools out there that can do this that are still available (and not full of malware)? Quick roundup of the options that used to exist, or that still exist but aren't suitable: Glovepie, which used to be the most recommended option, appears to be dead: it's own website hacked, its creator's googlepages page full of strange stuff that sounds like hacker-humour about the end of the world... (I'd rather not link to them, very dubious stuff...), and lots of forum threads asking if it's a dead project with comments along the lines of "I heard that the author intends to return to it" dated 2011... Wiiuse seems to be dead: its sourceforge page simply says "Error.", its own website has turned into a squatter page. There apparently was an extension for Autohotkey that allowed Wiimote input, but I've seen warnings that this too is now full of malware (see final commentin above link) Everything else I can find about using Wiimotes as input on Windows - for example, Johnny Lee Cheng's work - seems to be exclusively about using infrared or sensor bar, or tied to a specific purpose (e.g. FPS gaming). My main interest is in the accelerometer, and buttons if possible (although something that supports the IR stuff too would be ideal). Is there anything that works for getting Wiimote accelerometer input into Windows that is reliable and not a malware-fest? If anyone's interested in "Why?", it's to use the Wiimote as an audio / midi controller: to use movement, pitch, roll etc to modulate lots of different sound variables at once with one hand. Wiimotes are great for this, and Glovepie used to be the standard way to make this work (e.g. see for example this tutorial, and this one, ignore the unrelated video; I've also seen musicians using wiimote/glovepie setups at gigs, creating some really unique sounds). As of 2013, however, Glovepie seems to be a dead and thoroughly hacked project, sadly. Is there anything else? With or without MotionPlus is fine (with would be better). If anyone knows of any worthy alternatives to Wiimotes in terms of price and quality that can be made to work with a PC, that would also be great: but in my research I coulnd't find any (here's a link to someone reaching the same conclusion). found some potentially relevant stuff here, not had time to test any of it yet though - http://stackoverflow.com/questions/2984450/using-accelerometer-in-wiimote-for-physics-practicals

    Read the article

  • An SQLite/STDIN Conundrum, Specific to AIX

    - by mikfreedman
    Hi there! I'm been playing around with SQlite at work, specifically with trying to get the sqlite3 command line tool to accept stdin instead of a file. Sounds easy enough, on linux you can execute a command like: echo 'test' | sqlite3 test.db '.import /dev/stdin test' unfortunately - our machines at work run AIX (5 & 6) and as far as I can tell, there is no equivalent to the virtual file /dev/stdin. I managed to hack together an equivalent command that works on AIX using a temporary file. echo 'test' | cat - > /tmp/blah ; sqlite3 test.db '.import /dev/stdin test' ; rm /tmp/blah Now, does it need to use STDIN? isn't this temporary file thing enough? Probably, but I was hoping someone with better unix-fu had a more elegant solution. note: the data I would like to import is only provided via STDOUT, so that's what the echo 'test' command is all about

    Read the article

  • How to change GUI language in Outlook 2007

    - by user1466
    A new guy at work moved in from Denmark, which means that he initially logged in to our Outlook Web Access 2007 from a computer with Danish Windows. As a result, all the objects in the tree-view in Outlook are now in Danish. For example, "Inbox" is called "Indbakke". This prevails, even though he has now logged in locally on his assigned work computer which has English Windows. We're running Exchange 2003, if that matters. How do you change the language of the names of the objects in Outlook 2007? The "Microsoft Office 2007 Language Settings" tool doesn't do this, and I couldn't find anything relevant to this by googling either. In Exchange System Manager there are the "Details Templates" which define these things in different languages, but over on his mailbox there was no configuration option to change which language to use.

    Read the article

  • What command to use to unpack a .tar.gz file in Windows?

    - by Ivan
    I use to receive tar.gz files fromm colleagues but unpacking them with 7zip is not convenient as it unpacks a tar file from gz first while I usually seek to get the tar file contents (so I have to unpack the tar file explicitly next). I've tried adding tar -zxvf %P%N command to Total Commander button bar but it turned that tar -zxvf doesn't work but returns the following error (tried it in bare command prompt): tar: Cannot fork: Function not implemented tar: Error is not recoverable: exiting now I have got both GnuWin32 and cygwin installed, but I seek a solution that will work in Windows command line promt (and so will be callable from Totat Commander), not in cygwin command line promt.

    Read the article

  • How to install audio drivers for Acer Revo nettop?

    - by CT
    I have a Acer Revo nettop. I wiped the XP Home install that came on the machine and put XP Pro on. Acer's support website would lead you to believe that this product does not exist. I know it has a NVIDIA ION LE chipset so I headed over to nvidia.com to download drivers. Ive downloaded and installed the Chipset drivers, Graphics Drivers, and HDMI audio drivers. I have no sound. Under Device Manager there is an unknown Audio Device on High Definition Audio Bus. I do not have an HDMI cable to test hdmi audio. I would just like the standard audio mini-jack output to work. Anyone know of the correct driver or a generic driver that would work? Thanks

    Read the article

  • Connect to virtual host computer from within virtualbox

    - by Nicky De Maeyer
    I'm currently developing on an ubuntu karmic. For this I've installed lampp with a virtual host on apache so http://myproject/ is mapped to my project's root directory. Now to test the website in IE I've installed an XP machine on a virtualBox OSE. Ive managed to get the virtual host working on the XP by adding its to the hostfile, like this: 255.255.255.255 myproject where 255.255.255.255 is the ip adress of the host computer (my ubuntu). Now every day when I come to work and plug in my computer to the network, my IP has changed. so When i boot the XP I have to change the IP in the hostfile to my new IP. Is there any way where I can set the ip to somthing the XP will recognise as the host machine? I've tried replacing the IP in the hostfile by the host computer name, but that does not seem to work... This would make my like a bit easier :)

    Read the article

  • Full disk encryption on linux (ubuntu) w/o re-installing - possible?

    - by sa125
    Hi - I work at a company that takes security very seriously (like most). Our IT guy came in today to prepare us mentally to re-install our systems after he'll apply the new encryption policy (which will basically scrape our HD clean). For our team this means about a week of re-configuring, installing, and tweaking our desktops until we are back to work capacity - anyone who has to re-install a development machine probably knows what I'm talking about. So, I guess my question is if there's any way to perform full disk encryption on a linux (ubuntu = 9.04) system without having to re-install EVERYTHING [sigh]. IT guy said there isn't any - please prove him wrong. thanks :)

    Read the article

  • Windows 8 Microsoft Account and Microsoft Store doesn't allow login

    - by Prabhpreet
    The problem is that I have to go through proxy here in college to make my internet work. When I signed with my live id to switch to the Microsoft account in Windows 8, it recognized and validate my security questions but says it cannot connect to Microsoft Services. All other apps like mail, messenger, etc. work except for the Windows Store. The windows store what apps are available but when installed, queues it up for a pending download. Is there a way to modify my proxy settings so that I can access both these features?

    Read the article

  • Chrome Java Plugin not working after moving Java installation directory

    - by Florian Peschka
    I recently moved all my Java installations from C:\Program Files\Java to D:\Java, as my C:\ partition only had a few MB of free space left and windows kept on bugging me about it. I also edited every registry entry in HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft that pointed to the old directory to now point to the new one. Then changed the PATH variables and removed the old files, did a restart, and all Java applications work just fine. Yet, Chrome is the only application that seems to have a problem with what I did, as the Java Plugin isn't recognized any more. Are there any registry entires I may have missed? Maybe in the Chrome registry? How can I make this work again?

    Read the article

  • Problems with vim/locale as non-root user on Solaris

    - by Lyle
    I do some work on a Solaris 10 machine, and my .vimrc is set up to show unicode characters for tabs and line endings: set listchars=tab:?\ ,eol:¬ This works out of the box on my OS X machine. On Linux as well as Solaris I get the following error when I start vim: Error detected while processing /home/lhanson/.vimrc: line 17: E474: Invalid argument: listchars=tab:?~V?\ ,eol:¬ I solved this on my Linux box by setting LANG=en_US.utf8 ('locale -a' shows this as being an option). On Solaris, however, 'locale -a' shows the following: C POSIX iso_8859_1 Setting LANG to C or POSIX yields the same error, and even though iso_8859_1 probably wouldn't work it doesn't successfully change the locale anyway. As a non-root user, is there any way I can have my unicode characters show up?

    Read the article

  • How do I reinstall/enable snapper?

    - by Aaron Digulla
    I had errors in my root filesystem (btrfs) so I recreated it from a backup but now, snapper doesn't work anymore: # /usr/bin/snapper -v -v -v -v create --description test IO Error. # snapper -v delete-config Deleting config failed (deleting snapshot failed). # snapper create-config / Creating config failed (subvolume already covered). # snapper -c root create-config / Creating config failed (subvolume already covered). # snapper list Type | # | Pre # | Date | User | Cleanup | Description | Userdata -------+---+-------+------+------+---------+-------------+--------- single | 0 | | | root | | current | I also tries to reinstall/remove and install the package snapper but without any luck. Any ideas how I can make snapper work again? openSUSE 12.3 with kernel 3.7.10-1.1-desktop.

    Read the article

  • In windows xp, how can I set the default browser from chrome to IE via Command Line, without admin privs

    - by Bugmage
    Situation: 1. Need to Set the defualt browser to IE via cmd(problem) 2. Need to do a citrix login via IE(amounts to loading a url) beause it wont run in google chrome 3. then set default browser to chrome Environment: Windows XP, no admin priv's no admin priv's mean I can't touch registry Basic Steps I'm Doing: In a bat file: 1.Set default browser to IE 2.run a citrix SSO login via IE (not compatible with chrome) 3.Set default browser to Chrome 4.kill IE 5.live long and prosper So i have it all running except "Set default browser to IE" I can set the default browser to chome by using portable chrome's cmd line argument --make-default-browser but I can't undo that process. If I launch IE, it pops up that 'make ie default browser' window which stops the SSO process. So If I can disable that check via bat file, that would also work for me. Things i've tried that didn't work: shmgrate.exe OCInstallReinstallIE We are using IE8 Maybe someone can find a chrome switch that undoes default browser: http://peter.sh/experiments/chromium-command-line-switches/ thanks for the help guy's

    Read the article

  • Issue with PHP and osx 10.7 - runs via command line but not in browser

    - by jnolte
    I recently removed MAMP as I wanted to have more control over my machine and wanted to make use of PHP5.4 I installed using the script located here I cannot now not even get my default PHP that is built in to osx to work. I am running this script with a simple In a document in my ~/Sites directory. I am really at a loss as to why this will not work. I have php5 installed in my /usr/local directory via the link provided above and it seems like the main php is installed in /usr/bin Any and all insight on how to debug this would be greatly appreciated.

    Read the article

  • django + wsgi + suexec + userdir + apache?

    - by Jayen
    I've got a django 1.1 website I want to run in wsgi (as that seems to be the recommended deployment on apache). I want it to run as the www user (apache is running as www-data). I would ideally like this to work out of http://hostname/~www/ (~www/public_html) as well as http://virtualhostname/. I also want this to work for other users who may later use wsgi. Can I make this happen? I've been staring at docs trying to figure where to start, but I'm having trouble combining userdir and wsgi to let me run ~xxx/public_html/index.wsgi as user xxx, for every user xxx.

    Read the article

  • Mini DisplayPort -> DVI -> VGA ?

    - by ibz
    I have a Mini DisplayPort to DVI adapter which I use to connect my MacBook to a screen that has DVI input. I also have a screen with VGA only input which I want to be able to use, so instead of buying yet another expensive Apple adapter (the Mini DisplayPort to VGA), I just got a cheap DVI to VGA, so I can do Mini DisplayPort - DVI - VGA. It doesn't seem to work though. The screen just says "no connection". Does anyone know if this is actually supposed to work (and my DVI - VGA is just broken), or is this simply not supported and I need to get the expensive Apple Mini DisplayPort to VGA? Thanks!

    Read the article

  • Mac OS X bash prompt bug?

    - by Memo
    I am trying to set my bash prompt to display the time and current directory in bold: export PS1="\[\e[1m\][\A] \w \$ \[\e[0m\]" This does apparently work, but when I use the command history (ctrl-r), after finding the command I was searching for and pressing enter, this line is not displayed correctly. Here is an example: [21:58] ~/Wyona/svn-repos/zwischengas $ (reverse-i-search)`ta': tail -F logs/log4j-cnode1.log becomes, after pressing enter: [21:58] ~/Wyona/svn-repos/zwischengas $ -F logs/log4j-cnode1.log Of course, this is not "really" a problem, since the command does work correctly, but it is still annoying. Does anybody know why this happens? And, more importantly, how to prevent/fix it? Thanks, Memo

    Read the article

  • Dropbox alternative with local sync support?

    - by srid
    I am currently using Dropbox. Just decided to sync my huge (about 5 GB) iTunes Library (music collection) in Dropbox. For that I must subscribe to their paid account. But before I do so, I'd like evaluate the alternatives. Is there an alternative that does this? Local LAN sync (eg: sync my huge music collection across computers in local network without uploading/downloading them to internet) The following would be nice (but not required): Native android client - so music will be made available in the Android music app / SDHC card Selective sync: sync particular folders / exclude certain folders on certain computers .. eg: excluding porn folder on work computers ;-) Just like Dropbox, it MUST work on 64-bit Windows, Linux and Mac. Know of any? (I am currently evaluating Spideroak. Boy, was it so complicated to use?)

    Read the article

  • Connecting multiple ColdFusion 10 instances to a single Apache 2.2 server

    - by Adam Cameron
    This is on Windows 7 Home Premium edition. I have got two ColdFusion 10 (updater 2) instances: "cfusion" (the default one), and "scratch". I have got a single instance of Apache 2.2 running. Within Apache, I have set up two virtual hosts, each of which needs to be served by a different ColdFusion instance. Each of the CF instances serves files fine via Tomcat's internal web server. Apache serves vanilla HTML files fine too. So both CF instances, and both virtual hosts separately work OK. I can get wsconfig.exe to connect either one of the CF instances to the Apache server, and serve CF files via Apache & that instance. However I cannot find a way of connecting the second CF instance to Apache as well, so that both CF instances are conected, each serving one of the virtual hosts. WSConfig doesn't seem to understand the notion of "multiple CF instances", and the changes it makes to the httpd.conf (via mod_jk.conf) does not seem to be implemented in such a way as to accommodate multiple CF instances talking to a single Apache instance, or multiple virtual hosts. I freely admit to not being confident enough with how mod_jk (or even really httpd.conf) works to be able to guess if I can change stuff to make it work. If I try to add the second CF instance using WSConfig, I just get a message "the web server is already configured for ColdFusion". Be that as it may... not the instance of ColdFusion I want to connect it to! If I remove the existing connector to whichever instance is already connected, I can then connect the other one no problems. Not that this helps, but it demonstrates that the CF instance can connect to Apache. This all used to be fairly straight fwd under older versions of CF and JRun :-( The only docs I have found are on the "Connect multiple Apache virtual hosts on a web server to a single ColdFusion server" page, but that specifically only deals with a single CF instance. There is no equivalent page for multiple CF instances. I'm kinda hoping I can move some of the mod_jk config into my virtual host entries in httpd-vhosts.conf (this is how it used to work for JRun), but I've no idea what to put where. I think I've covered all the necessary info here? If not, sing out and I'll add more. Thanks. PS: tried to specifically tag this as "ColdFusion-10" as the answer will be different from previous CF versions, but it won't let me cos my rep on this site is too low (odd how it doesn't consider my rep from other S/O sites...). If someone with sufficient rep can add it, that'd be cool: it's probably a valid tag to have. Ta.

    Read the article

< Previous Page | 663 664 665 666 667 668 669 670 671 672 673 674  | Next Page >