Search Results

Search found 20359 results on 815 pages for 'fixed length record'.

Page 668/815 | < Previous Page | 664 665 666 667 668 669 670 671 672 673 674 675  | Next Page >

• Triple (3) Monitors under Linux

  - by widgisoft

  I have a 3 monitor setup (each 1680x1050) via an Nvidia NVS440 (2 GPUs, 2 outputs per GPU totalling 4 outputs); this works fine under Windows XP,7 but caused considerable headaches under Linux (Ubuntu 9.04). I had previously used an XFX 9600GT and the onboard XFX 9300GS to produce the same result but the card was noisy and power hungry and I was hoping that there was some magical switch in the NVS4400 that got rid of this annoying problem - turns out the NVS440 is just 2 cards on one physical PCB :-p (I searched the net high and low for people using this card under Linux but found nothing, if anything the card uses less power and is fan less so I was to benefit from it either way) Anyway, using either set up there were 5 solutions available: Have 3 separate X instances, all un joined Have 3 separate X instances, adjoined by Xinerama Have 2 separate X instances - One using twin-view, both adjoined by Xinerama Have 2 separate X instances - One using twin-view but no Xinerama Have a single Twin-view setup and leave the 3rd screen unplugged :-p The 4rd option, using 2 separate X instances and twinview (but no xinerama) was the best balance in terms of performance and usability but caused 2 really annoying issues You couldn't control (without altering the shortcuts) which screen an application opened onto - and once it was opened you couldn't move it to another screen without opening up terminal and forcing it to move Nvidia's overriding or falsifying of Xinerama breaks and the 2 screens joined by Twin view behave like a single huge screen causing popups to open in the middle of both screens and maximising of windows stretches to the width of the first 2 screens Firefox can only run one instance as the same user so having multiple firefox windows requires at least 2 users The second option "feels" like the right option, but OpenGL is basically disabled and playing any sort of game or even running anything graphical causes a huge performance drop and instability - even trying to run a basic emulator for gba or gens just causes the system to fall over. It works just enough to stare at your desktop and do nothing but as soon as you start doing some work - opening windows, dragging things around - running multiple copies of firefox it just really feels slow. The last open, only going dual screen works perfectly and everything performs as required, full GPU acceleration - two logical screen spaces - perfect, just make it work across GPUs like windows! :-p Anyway, I know RandR was supposed to pick up the slack when it would introduced GPU objects of sorts to allow multiple GPUs to be stitched together to create one huge desktop at a much deeper layer than Xinerama. I was wondering if this has now been fixed (I noticed X server 1.7 is out) and whether anyone has got it running successfully? Again, my requirements are: One huge desktop to drag any window across Maximising of windows to each screen (as XP does) Running fullscreen apps on the primary screen and disabling the mouse from moving onto the others or on all 3 stretched Finally as a side note; I am aware of the Matrox triple (and dual) head splitter but even the price they go for on eBay is more than I can afford atm, my argument: I shouldn't have to buy extra hardware to get something to work on Linux when it's something that's existed in the windows world for a long time (can you tell I don't get on with X :-p); If I had the cash I'd have bought the latest version of this box already (the new version finally supports large resolutions as the displays I have 1680x1050 each).

  Read the article

• Confused with DKIM, SPF and Exim Configs

  - by 0pt1m1z3

  I've now spent 2 hours trying to figure out this issue and I am about to give up and go to bed. I've been having issues with Gmail rejecting emails from my VPS server because of false spam alerts (probably caused by lfd sending too many emails). So I changed my Exim config to send emails from a different IP (my VPS comes with 3) and that fixed the issue. I also enabled DKIM and SPF on my domains for added measure. But now, all my emails appear as ("From: Sender Name via server.domain1.com") where server.domain1.com is my VPS hostname. I previously had the same issue in Outlook and turning off "Set SMTP Sender: headers" solved that problem. But I believe adding the DKIM and SPF now makes Gmail add "via server.domain1.com" to my messages. How do I fix this? This is a typical header for a message (as it appears at gmail): Delivered-To: [email protected] Received: by 10.60.44.163 with SMTP id f3csp248622oem; Thu, 29 Mar 2012 21:23:18 -0700 (PDT) Received: by 10.50.106.200 with SMTP id gw8mr452788igb.10.1333081398523; Thu, 29 Mar 2012 21:23:18 -0700 (PDT) Return-Path: <[email protected]> Received: from domain2.com ([X.X.X.X]) by mx.google.com with ESMTPS id y1si810998igb.3.2012.03.29.21.23.18 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 29 Mar 2012 21:23:18 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates X.X.X.X as permitted sender) client-ip=X.X.X.X; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates X.X.X.X as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=server.domain1.com; s=default; h=Date:Message-Id:From:Content-type:MIME-Version:Subject:To; bh=wF8bBRgh01EYg4t5DAeVPv1Ps906UVIeRnQCb/HvSYw=; b=k/Pg7lnrO+Ud/z1mOTv+O/3DiJzzQgyBhfIizIaFHM8tF/eNJt5P2k+9yQB224sxYstZIWwVRBJmiqvcM1QhARv1HWqWma0crppZ3JOn+LRHANan634OBi+58SIRA+gu; Received: (Exim 4.77) id 1SDTVE-0005HA-9Y for [email protected]; Fri, 30 Mar 2012 00:31:56 -0400 To: [email protected] Subject: Password Reset Request MIME-Version: 1.0 Content-type: text/html; charset=iso-8859-1 From: Sender Name <[email protected]> Message-Id: <[email protected]> Date: Fri, 30 Mar 2012 00:31:56 -0400 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - server.domain1.com X-AntiAbuse: Original Domain - domain2.com X-AntiAbuse: Originator/Caller UID/GID - [507 504] / [47 12] X-AntiAbuse: Sender Address Domain - server.domain1.com

  Read the article

• Sarg report error

  - by amyassin

  I have a proxy server that runs Ubuntu Server 11.10, Squid 2.7.STABLE9. I installed sarg (version 2.3.1 Sep-18-2010) to generate reports using the ordinary apt-get install, and added a cron job to generate a report of the day every 5 minutes (that will overwrite the 5-minutes-older one): */5 * * * * /root/proxy_report.sh And the content of /root/proxy_report.sh is: #!/bin/bash /usr/bin/sarg -nd `date +"%d/%m/%Y"` > /dev/null 2>&1 And I added another cron job to generate a full report every hour at :32 (not to collide with the 5 minutes job): */32 * * * * /root/proxy_report_full.sh And the content of /root/proxy_report_full.sh is : #!/bin/bash /usr/bin/sarg -n > /dev/null 2>&1 And I added a small script to remove the yesterday full report (the full report that ends in yesterday that won't be overwritten by the new today full report) in /etc/rc.local to run at startup: /usr/bin/rm_yesterday.sh &>> /var/log/rm_yesterday Where /usr/bin/rm_yesterday.sh: #!/bin/bash find /var/www/sarg/ | grep `date -d Apr1 +"%Y%b%d"`-* | grep -v `date +"%Y%b%d"` | xargs rm -rf * Apr1 is the starting date of the proxy... ** I've placed it in /usr/bin to be mounted early at startup... That arrangement went OK for about a month and a half, except for one time I noticed some errors and reports wasn't generated, and fixed that by making an offset (the two minutes in 32 of the second cron job). However, it then started not to generate reports anymore. By manually trying to generate it it gives the following error: root@proxy-server:~# sarg -n SARG: getword_atoll loop detected after 3 bytes. SARG: Line="154 192.168.10.40 TCP_MISS/200 39 CONNECT www.google.com" SARG: Record="154 192.168.10.40 TCP_MISS/200 39 CONNECT www.google.com" SARG: searching for 'x2f' SARG: getword backtrace: SARG: 1:sarg() [0x8050a4a] SARG: 2:sarg() [0x8050c8b] SARG: 3:sarg() [0x804fc2e] SARG: 4:/lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0x129113] SARG: 5:sarg() [0x80501c9] SARG: Maybe you have a broken date in your /var/log/squid/access.log file When I looked to /var/log/squid/ folder, I noticed that it contains some rotated logs: root@proxy-server:~# ls /var/log/squid/ access.log access.log.1 cache.log cache.log.1 store.log store.log.1 So maybe sarg installed logrotate with it? Or it comes with the standard Ubuntu? I don't remember I installed it manuallly. The question is: What could've gone wrong? Does it have something to do with rotating the log? How can I trace the error and start generating reports again?

  Read the article

• How to tune system settings for mongoDB on Linux?

  - by jsh

  Trying to squeeze a lot out of one question here -- please bear with me. Although the MongoDB man pages make several useful recommendations about system settings like ulimit (http://docs.mongodb.org/manual/reference/ulimit/), and other production factors (http://docs.mongodb.org/manual/administration/production-notes/) they seem mysteriously silent on things like virtual memory and swap settings. The closest we get to a hint is that "...the operating system’s virtual memory subsystem manages MongoDB’s memory..." (http://docs.mongodb.org/manual/faq/fundamentals/#does-mongodb-require-a-lot-of-ram). Running the same job - high writes and high reads on about 10,000,000 records in a single collection -- on my 4-processor, 4GB RAM macbook and an 8-core ubuntu box with 64GB RAM I saw dramatically WORSE read performance on the linux box with factory settings, and could hear the disk constantly spinning, indicating high I/O and presumably swapping. Yes, other things were happening on the box, but there was plenty of free RAM, disk space, etc.; furthermore, I did not see evidence that Mongo was expanding to take advantage of all that free RAM as it is touted to do. Linux box default settings were as follows: vm.swappiness =60 vm.dirty_background_ratio = 10 vm.dirty_ratio = 20 vm.dirty_expire_centisecs =3000 vm.dirty_writeback_centisecs=500 I hazarded some guesses looking at docs and blogs for other types of databases (Oracle, MYSQL, etc.), experimented, and adjusted as below. vm.swappiness=10 vm.dirty_background_ratio=5 vm.dirty_ratio=5 vm.dirty_writeback_centisecs=250 vm.dirty_expire_centisecs=500 I saw some immediate apparent improvements in read time. However, when I ran my test jobs again, read performance continued to be painfully sluggish during heavy writes. Then, I REBUILT the collection from an available data source - and suddenly I can read at 1ms or less per record WHILE doing the write job! So the question is really two-fold: 1) What are appropriate VM settings for MongoDB on Linux? 2) (bonus) Does Mongo do some checking or optimization with the OS while data is being built? In other words, if I have built a large data set with suboptimal VM or I/O settings, does Mongo make assumptions during the memory-mapping process that will fail to take advantage of optimizations down the road? Obviously I don't fully grok memory mapping under the hood (I was hoping I wouldn't have to). Any help appreciated...thanks! -j

  Read the article

• Htaccess strange behaviour with Nginx

  - by Termos

  I have a site running on Nginx (v1.0.14) serving as reverse proxy which proxies requests to Apache (v2.2.19). So Nginx runs on port 80, Apache is on 8080. Overall site works fine except that i cannot block access to certain directories with .htaccess file. For example i have 'my-protected-directory' on 'www.site.com' Inside it i have htaccess with following code: <Files *> order deny,allow deny from all allow from 1.2.3.4 <--- my ip address here </Files> When i try to access this page with my ip (1.2.3.4) i get 404 error which is not what i expect: http://www.site.com/my-protected-directory However everything works as expected when this page is served directly by Apache. I can see this page, everyone else can't. http://www.site.com:8080/my-protected-directory Update. Nginx config (7.1.3.7 is site ip.): user apache; worker_processes 4; error_log logs/error.log; pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; sendfile on; keepalive_timeout 65; gzip on; gzip_min_length 1024; gzip_http_version 1.1; gzip_proxied any; gzip_comp_level 5; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript image/x-icon; server { listen 80; server_name www.site.com site.com 7.1.3.7; access_log logs/host.access.log main; # serve static files location ~* ^.+.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { root /var/www/vhosts/www.site.com/httpdocs; proxy_set_header Range ""; expires 30d; } # pass requests for dynamic content to Apache location / { proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Range ""; proxy_pass http://7.1.3.7:8080; } } Could please anyone tell me what is wrong and how this can be fixed ?

  Read the article

• VPN Connection Causes Internal LAN Connection Loss with Server

  - by sleepisfortheweak

  I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

  Read the article

• One user sometimes gets an unknown certificate error opening Outlook

  - by Chris

  Let me clarify a little. This isn't an unknown certificate error it's an unknown certificate error in so much as I can't figure out where the certificate comes from. This happens on a Win 7 Enterprise machine connecting to Exchange 2010 with Outlook 2010. The error he gets is that the root is not trusted because it's a self-signed cert. Take a look at this screenshot because even if I had generated this myself I wouldn't have put "SomeOrganizationalUnit" or "SomeCity" or "SomeState", etc. (Red block covers our domain name.) I'm a little concerned this is a symptom of a security breach. Exchange 2010 has three certificates installed but none of them are this certificate. They all have different expiration dates (one is expired) and different meta-data. edit: There are two scenarios that I see the certificate warning and one of them I can reliably repeat. When the user leaves his computer on over night Outlook pops the Security Warning window. I don't know what time this happens. Using Outlook Anywhere if I connect to Exchange externally via a cellular USB modem the Security Warning window will appear every time I close and reopen Outlook. Whether I say Yes or No does not make a difference on whether or not I can connect to Exchange and send/receive email. In other words, I can always connect to Exchange. I've checked my two Exchange servers and my Cisco router for a certificate that matches this one and I can't find it. edit 2: Here is a screenshot of the Security Alert window. (I've been calling it Security Warning... My mistake.) edit 3: I stopped seeing this error several weeks ago but I can't tie it to any single event (because I just sort of realized that warning had stopped showing up) but I think I found the source of the certificate. Last week I found out that the certificate on our website DomainA.com was invalid. I knew that our web admin had installed a valid certificate so when I look into the problem I found out I was being presented with the invalid certificate that this posting is in regards to. The Exchange server's domain is mail.DomainA.com so I can only guess that Outlook was passing this invalid certificate through as it did some kind of check on DomainA.com. This issue is still a mystery because the certificate warning stopped appearing several weeks ago whereas the invalid certificate issue on the website was only fixed last week. It ended up being a problem with the website control panel. The valid certificate was installed but not being served for some reason and instead the self-signed cert was being served.

  Read the article

• Why did Intel drop the Itanium?

  - by Cole Johnson

  I was reading up on the history of the computer and I came along the IA-64 (Itanium) processors. They sounded really interesting and I was confused as to why Intel would decide to drop them. The ability to choose explicitly what 2 instructions you wanted to run in that cycle is a great idea, especially when writing your program in assembly, for example, a faster bootloader. The hundreds of registers should be convincing for any assembly programmer. You could essentially store all the functions variables in the registers if it doesn't call any other ones. The ability to do instructions like this: (qp) xor r1 = r2, r3 ; r1 = r2 XOR r3 (qp) xor r1 = (imm8), r3 ; r1 = (imm8) XOR r3 versus having to do: ; eax = r1 ; ebx = r2 ; ecx = r3 mov eax, ebx ; first put r2 into r1 xor eax, ecx ; then set r1 equivalent to r2 XOR r3 or ; SAME mov eax, (imm32) ; first put (imm32) into r1 xor eax, ecx ; then set r1 equivalent to (imm32) XOR r3 I heard it was because of no backwards x86 comparability, but couldn't thy be fixed by just adding the Pentium circuitry to it and just add a processor flag that would switch it to Itanium mode (like switching to Protected or Long mode) All the great things about it would have surly put them a giant leap ahead of AMD. Any ideas? Sadly this means you will need a very advanced compiler to do this. Or even one per specific model of the CPU. (E.g. a newer version of the Itanium with an extra feature would require different compiler). When I was working on a WinForms (target only had .NET 2.0) project in Visual Studio 2010, I had a compile target of IA-64. That means that there is a .NET runtime that was able to be compiled for IA-64 and a .NET runtime means Windows. Plus, Hamilton's answer mentions Windows NT. Having a full blown OS like Windows NT means that there is a compiler capable of generating IA-64 machine code.

  Read the article

• Deployment/provisioning tool for commercial applications (not developed in-house)

  - by mfinni

  I help manage a few hosted commercial applications, and we have a lot of manual processes involved when doing new customer-instance deployments into the shared (multitenant) environment. Allow me to describe the most relevant features, and then we can talk about the tools. We have an application on AIX, that requires dozens of changes to config files (some plain text, some XML) as well as a good number of commands to be run on multiple servers - some to start the new instance, some to restart our shared authentication and reporting engines, etc. The config changes follow templates, of course. The servers in question will also depend on the initial conditions specified by the implementer/deployer - we may choose to deploy a given customer to our servers in Europe, or one set of servers may be active-active whereas a different set of servers is active-passive - in short, there's a lot of complications. We have another application that run on IIS 6 and SQL. The DBAs don't want any automation of the SQL components and that's fine with me, but automating the IIS bit would be great. For a new customer instance, we make a filesystem copy of a template Virtual Directory target named after the new customer, make a new AppPool to match, edit a VirDir template .xml file to replace the filepaths and AppPool names with the new ones, and then make a new VirDir from the modified template XML to point to the new filesystem folder and app pool. For the first case, something like ControlTier or Chef might be good. For the second, the new(ish) Web Deploy from MS would probably do a good job. Has anyone used these tools or others to do something similar for applications? More of a nice-to-have, not a fixed requirement - Has anyone used anything that works on both platforms? I'm looking for something free, because the official word is that within a year, we will have whatever HP has renamed the OpsWare suite, which should be able to do stuff like this. Edit - based on someone's suggestion, looking at CFengine for the AIX application, it doesn't seem to address my pain. The problem isn't keeping a given config synced across dozens of servers, we have rsync for that. The problem is that onboarding a new customer instance touches dozens of files, putting pieces of the same or similar information into them - some are new stanzas in existing files, some are new files, and some are new directories. This is a several-hours-long process that is also error-prone because it's mostly done by hand. I guess I'm looking for config-file generation and management. I have built a small Perl script to do something similar for a much smaller case - it binds a CSV file into variables, and then does a copy-and-search-and-replace from a set of template config files. I could probably do the same here.

  Read the article

• arp "who-has tell" on cloned machine

  - by mcmorry

  I have a urgent problem to solve today, but I'm lost. Please help. I've cloned a Virtual Machine hosted on VM Ware ESXi 4.1 The OS is now Ubuntu Server 12.04 LTS, but at the time of cloning it was 10.04 LTS. I fixed the MAC address manually inside /etc/udev/rules.d/70-persistent-net.rules. It is a known problem on Ubuntu. I had to remove the old MAC address and set the new one as eth0. Everything seems to work fine, except ARP. My provider OVH sent me a warning to resolve it today (this is the second day) or they will block my IP! The log contains many lines like this: Tue Jun 5 01:04:29 2012 : arp who-has 178.32.136.212 tell 178.32.136.224 where .224 is the cloned server that is causing problems, and .212 is the cloned one. arp -na returns: ? (178.33.230.254) at 00:07:b4:00:00:02 [ether] on eth0 ? (178.32.136.212) at 00:50:56:09:8e:f1 [ether] on eth0 The first IP is the ESXi machine. The second one should not be there. I'm not an expert and I don't know what else to do to fix this problem. Any help will be very appreciated. Thanks. EDIT: ifcofig on .224: eth0 Link encap:Ethernet HWaddr 00:50:56:01:32:c6 inet addr:178.32.136.224 Bcast:178.32.136.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe01:32c6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:399924 errors:0 dropped:465 overruns:0 frame:0 TX packets:241884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:58006071 (58.0 MB) TX bytes:663603166 (663.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:516216 errors:0 dropped:0 overruns:0 frame:0 TX packets:516216 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:236284275 (236.2 MB) TX bytes:236284275 (236.2 MB) ifconfig on .212: eth0 Link encap:Ethernet HWaddr 00:50:56:09:8e:f1 inet addr:178.32.136.212 Bcast:178.32.136.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe09:8ef1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16014 errors:0 dropped:0 overruns:0 frame:0 TX packets:14511 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15134444 (15.1 MB) TX bytes:2683025 (2.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9944 errors:0 dropped:0 overruns:0 frame:0 TX packets:9944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1139347 (1.1 MB) TX bytes:1139347 (1.1 MB)

  Read the article

• nginx rewrite rule to convert URL segments to query string parameters

  - by Nick

  I'm setting up an nginx server for the first time, and having some trouble getting the rewrite rules right for nginx. The Apache rules we used were: See if it's a real file or directory, if so, serve it, then send all requests for / to Director.php DirectoryIndex Director.php If the URL has one segment, pass it as rt RewriteRule ^/([a-zA-Z0-9\-\_]+)/$ /Director.php?rt=$1 [L,QSA] If the URL has two segments, pass it as rt and action RewriteRule ^/([a-zA-Z0-9\-\_]+)/([a-zA-Z0-9\-\_]+)/$ /Director.php?rt=$1&action=$2 [L,QSA] My nginx config file looks like: server { ... location / { try_files $uri $uri/ /index.php; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } How do I get the URL segments into Query String Parameters like in the Apache rules above? UPDATE 1 Trying Pothi's approach: # serve static files directly location ~* ^.+\.(jpg|jpeg|gif|css|png|js|ico|html)$ { access_log off; expires 30d; } location / { try_files $uri $uri/ /Director.php; rewrite "^/([a-zA-Z0-9\-\_]+)/$" "/Director.php?rt=$1" last; rewrite "^/([a-zA-Z0-9\-\_]+)/([a-zA-Z0-9\-\_]+)/$" "/Director.php?rt=$1&action=$2" last; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } This produces the output No input file specified. on every request. I'm not clear on if the .php location gets triggered (and subsequently passed to php) when a rewrite in any block indicates a .php file or not. UPDATE 2 I'm still confused on how to setup these location blocks and pass the parameters. location /([a-zA-Z0-9\-\_]+)/ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME ${document_root}Director.php?rt=$1{$args}; include fastcgi_params; } UPDATE 3 It looks like the root directive was missing, which caused the No input file specified. message. Now that this is fixed, I get the index file as if the URL were / on every request regardless of the number of URL segments. It appears that my location regular expression is being ignored. My current config is: # This location is ignored: location /([a-zA-Z0-9\-\_]+)/ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index Director.php; set $args $query_string&rt=$1; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location / { try_files $uri $uri/ /Director.php; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index Director.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; }

  Read the article

• System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

  - by MGOwen

  Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

  Read the article

• Unknown problem causing major computer failure, Booting problem with windows 7, mainly with 0x0000000A

  - by ken

  Where do I begin? OS=Windows 7 I think it all started when I ran an installation file. I suspect it may have been a virus (even though AVG scan didnt pick anything up). The installation failed, computer crashed then restarted. In the middle of the reboot, I get BSOD. Normal boot up doesnt work so I use safe mode. Method 1: Not a problem I thought cos I will do what I normally do and that was to recover from my image file. Unfortunately, my Acronis software cant recover in safe mode. Method 2: I created a bootable disc for the Acronis recovery software. Managed to boot to Acronis and started the recovery from image file. This fail with some error message (did not manage to record). Something to do with not be able to copy to $AVG folder. Method 3: At this stage, assumed it was still a virus causing the problem so decided to format that partition to remove everything and hopefully the virus too. Had a lot of problems trying to bypass the system to allow me to format but (i think- more on this later) I managed to do that. Image was recovered, thought problem was resolved. Tried to boot windows but new error: Boot Manager is missing. Read up on this and managed to copy the Boot Manager from my Laptop's Manufacturer's partition (partition contains factory setup image file). Windows loaded but new BSOD with 0x000000A problem. Method 4: Attempted to reinstall factory settings but this failed cos i suspect by formating the partition, I may have removed the recovery software. Tried to create a bootable dvd of factory setting but machine is so bad it continues to crash. Bootable dvd method failed. Method 5:Spent alot of time reading up on this error, even installed a software to help scan and fix the problem. Scan failed and software required money! Anyway, lots of BSOD with different error message like 0x00000001A and 0x0000000D1. Error message changes with some reboots. Method 6: Found a hotfix from the windows site to fix 0x0000000A problem, great I thought! In safe mode, I cant install the file cos of error:0x8007043c. Tried to then install the fix in normal mode but installation just hangs. Returned to safe mode and followed advice to bypass 0x8007043c by changing the BITS status (read here: http://www.vistaheads.com/forums/microsoft-public-windowsupdate/181931-error-number-0x8007043c-windows-update.html). However, my machine at this time is so flaky that it hangs everytime i right mouse click the computer icon. I am at my wits end. Ya help or ideas? Cheers

  Read the article

• VirtualBox Port Forward not working when Guest IP *IS* specified (while doc says opposite)

  - by Patrick

  Trying to port forward from host (Mac OS X) 127.0.0.1:8282 - guest (CentOS)'s 10.10.10.10:8080. Existing port forwards include 127.0.0.1:8181 and 9191 to guest without any IP specified (so whatever it gets through DHCP, as explained in the documentation). Here is how the non-working binding was added: VBoxManage modifyvm "VM name" --natpf1 "rule3,tcp,127.0.0.1,8282,10.10.10.10,8080" Here is how the working ones were added: VBoxManage modifyvm "VM name" --natpf1 "rule1,tcp,127.0.0.1,8181,,80" VBoxManage modifyvm "VM name" --natpf1 "rule2,tcp,127.0.0.1,9191,,9090" And by "non-working", I of course mean not listening (as a prerequisite to forwarding): $ lsof -Pi -n|grep Virtual|grep LISTEN VirtualBo 27050 user 21u IPv4 0x2bbdc68fd363175d 0t0 TCP 127.0.0.1:9191 (LISTEN) VirtualBo 27050 user 22u IPv4 0x2bbdc68fd0e0af75 0t0 TCP 127.0.0.1:8181 (LISTEN) There should be a similar line above but with 127.0.0.1:8282. Just to be clear, this port is listening perfectly fine on the guest itself. And when I remove the guest IP (i.e., clear the 10.10.10.10) the forward works fine, albeit to eth0 (not eth1 where I need it). I can tcpdump and watch the traffic flow back and forth. And yes, I've disabled iptables entirely while testing -- it's not getting blocked anywhere on the guest. As VirtualBox writes in their documentation, you are required to specify the guest IP if it's static (makes sense, no DHCP record it keeps): "If for some reason the guest uses a static assigned IP address not leased from the built-in DHCP server, it is required to specify the guest IP when registering the forwarding rule:". However, doing so (as I need to), seems to break the port forward with nary a report in any log file I can find. (I've reviewed everything in ~/Library/VirtualBox/). Other notes: While I used the above command to add the third rule, I've also verified it showed up correctly in GUI and then removed/re-added from there just to make sure). This forum link -- while very dated -- looks somewhat related in that a port forward to a static IP was not appearing (perhaps they think due to lack of gratuitous arp being sent for host to know IP is there/avail?). Anyway, what gives? Is this still buggy? Any suggestions? If not, easy enough workarounds? What's interesting is that this works perfectly fine on another user's Mac, however he's running a slightly older version (4.3.6 v. 4.3.12).

  Read the article

• Well....a ghost lives in my server...

  - by tsgiannis

  Hello to every body and greetings from Greece I have a rather unusual situation and i am running out of ideas. I have this old server (IBM x205 - P4 2.4Ghz,3xSCSI 36gb) and i was about a year ago i decided to use it as an additional domain controller,fax & file server...for this task i had a Delock 70154 SATA card along with 2x320 SATA II HDDs Everything was going super smoothly until about 3 weeks ago. I was on a trip and i was informermed when i got back that the server was found frozen...well i considered it was a glitch since a simple powerdown power up fixed everything.Again 2 weeks ago another freeze situation....it got suspicious but again power down power up everything was running.... Last again it frozen and when i power it up it came with a message that the Domain services could not start due to NTDS corruption....booting in safe mode revealed that there was an issue with the SATA Raid (degraded). After a lot of searching i degraded the server...cleaned Active Directory and pulled both HDDs out (one of these was really BAD ) and recovered my files (i had some problems with ho Delock handles the redudant HDD). Right now my server is vanilla simple...with only what the factory installed and here is where the fun begins. Everyday when i arrive at the office i find this particular machine dead..and i mean total dead...just a black screen and nothing else...the cpu fan is working ,the psu is working .keyboard and mouse are dead(they also lock my kvm) ...network is dead.... the machine is DEAD. I power it down forcilly ...i power it up and for the 8 hours i am in the office it works,either idling or running some kind of diagnostic...when i leave the office after some time..it maybe half an hour ...it maybe 4 hours the machine dies...at least this is the information the event log shows (" the previous shutdown at xx:xx:xx was unexpected) Well i must admit i am runnig out of ideas.... I have tried Memtest....nothing Passmark burn in test.....nothing Carefull study of the event log.....nothing Set Instead of restart..BSOD....nothing Power sceheme to sleep...all set to never. i know there are a lot of other tools that heavily stress a machine like occt but .... the machine is old...today i will give them a try nevertheless ..... One idea is to reformat it...but ... i really like to find what is causing this because i could get to a situation that everything is working for a while and kaboom...one day again is dying.. I really need a helping hand and every opinion / idea is well welcomed.... iknow the obvious solution is to never leave the office but....i have a life...sory server...:) P.S this situation with the machine dying some time after is going on for about one week...everyday i would set either the RAID to rebuild....or to copy/recover files and while everythig was working

  Read the article

• Issue using a "used" SSD as a Windows 8.1 Boot Drive

  - by EpiGrad

  So, I'm something of a Mac person, but decided to take a stab at this whole "build yourself a PC" thing - right now, the thing is assembled, posts just fine, and can get to the BIOS. The problem is the drive I want to use - I intended to use a 80 GB Corsair SSD I've had sitting around as the boot drive, and a new Samsung SSD for games and the like. So I boot using a Windows 8.1 install USB stick, and if the Samsung drive is plugged in, it happily offers to install Windows on it. The Corsair drive though, it's flipped out - I reformatted it as a blank NTFS drive (it was HFS for Mac purposes) and the BIOS can't see it, nor can the Windows installer. What's wrong, and how do I fix it? The tools at my disposal are: The current ASUS BIOS that came with my motherboard (a Z87I-Deluxe), a Mac running the latest OS X which can also boot to Windows 7 if needed via either Parallels or Bootcamp. Update 1: Update: Based on a friend's suggestion to switch SATA ports, Windows 8.1's installer can now see the drive as Drive 0, Partition 1, a 83.8 GB "Primary" partition. But when I click it and hit "Next", I get the following error: "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files" - not that it gives any clue how to access those. Update 2: Following a trail of Google suggestions, I ended up going into advanced tools and just reformatting the drive as follows: Start DISKPART. Type LIST DISK and identify your SSD disk number (from 0 to n disks). Type SELECT DISK <n> where <n> is your SSD disk number. Type CLEAN Type CREATE PARTITION PRIMARY Type ACTIVE Type FORMAT FS=NTFS QUICK Type ASSIGN Type EXIT twice (one to get out of DiskPart, the other to exit the command line tool) Per these instructions. This goes well enough, but now I can select the disk for installation, and I get a new error: "Windows 8 cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GP disks." So, Googling that, I do the following: select disk 0 clean convert gpt exit ...and we might have fixed it. Windows is at least trying to install now.

  Read the article

• My server's been hacked EMERGENCY

  - by Grant unwin

  I'm on my way into work at 9.30 p.m. on a Sunday because our server has been compromised somehow and was resulting in a DOS attack on our provider. The servers access to the Internet has been shut down which means over 5-600 of our clients sites are now down. Now this could be an FTP hack, or some weakness in code somewhere. I'm not sure till I get there. How can I track this down quickly? We're in for a whole lot of litigation if I don't get the server back up ASAP. Any help is appreciated. UPDATE Thanks to everyone for your help. Luckily I WASN'T the only person responsible for this server, just the nearest. We managed to resolve this problem, although it may not apply to many others in a different situation. I'll detail what we did. We unplugged the server from the net. It was performing (attempting to perform) a Denial Of Service attack on another server in Indonesia, and the guilty party was also based there. We firstly tried to identify where on the server this was coming from, considering we have over 500 sites on the server, we expected to be moonlighting for some time. However, with SSH access still, we ran a command to find all files edited or created in the time the attacks started. Luckily, the offending file was created over the winter holidays which meant that not many other files were created on the server at that time. We were then able to identify the offending file which was inside the uploaded images folder within a ZenCart website. After a short cigarette break we concluded that, due to the files location, it must have been uploaded via a file upload facility that was inadequetly secured. After some googling, we found that there was a security vulnerability that allowed files to be uploaded, within the ZenCart admin panel, for a picture for a record company. (The section that it never really even used), posting this form just uploaded any file, it did not check the extension of the file, and didn't even check to see if the user was logged in. This meant that any files could be uploaded, including a PHP file for the attack. We secured the vulnerability with ZenCart on the infected site, and removed the offending files. The job was done, and I was home for 2 a.m. The Moral - Always apply security patches for ZenCart, or any other CMS system for that matter. As when security updates are released, the whole world is made aware of the vulnerability. - Always do backups, and backup your backups. - Employ or arrange for someone that will be there in times like these. To prevent anyone from relying on a panicy post on Server Fault. Happy servering!

  Read the article

• Why am I unable to send an attachment with Outlook via SMTP that I am able to send via Gmail / Google Apps?

  - by cwd

  I have Google Apps installed and I have tried to set up Outlook 2007 to send messages via SMTP. I followed the guide, selecting what I believe are all the correct settings. Yes, I am using POP for incoming, that is intentional but I don't believe it should affect outgoing messages. When I log into gmail (google apps) for my company, I can send a message that has an 8MB attachment (pdf file, not zipped or anything) and it sends fine. However, when I send the same message in Outlook with that same 8mb attachment it fails. Why am I unable to send an attachment with Outlook via SMTP that I am able to send via Gmail / Google Apps? The message headers are (some info omitted for privacy): Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 552 552 #5.3.4 message size exceeds limit (state 17). ----- Original message ----- DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=company.com; s=google; h=from:to:cc:references:in-reply-to:subject:date:message-id :mime-version:content-type:x-mailer:thread-index:content-language; bh=7d4i/Cbt0v0sY3zt5lN6y5CdvxjbRmTBG4AuBuMxtF4=; b=IJwwxuIEdg1E4zXuGjeDod+1w3RYBBCNzSsqpuX77ih36HSiq++s3ZCQXPeU9CIZVg K8JPJQu9xjivYYjrRaYwyeowLIu0GIdR2h4kKEkFM/GNC2RFF3VwVgj+gvi5eqVZIuWn osT5/VEm10IED6B54NPOtGMgFTci6a57zzVKE= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=from:to:cc:references:in-reply-to:subject:date:message-id :mime-version:content-type:x-mailer:thread-index:content-language :x-gm-message-state; bh=7d4i/Cbt0v0sY3zt5lN6y5CdvxjbRmTBG4AuBuMxtF4=; b=LjTecjok5K71Bymp6tZqAL2XCz03hWROV1mTK8Vf2AeEJwtel9ACu9kE5jW5iJqckb upYKPzoqYLBwAPOzMb9asWoTAZPzC7LMG65eDUc2/ZEvGqXrZs3ziUxwhF4t169yRVuy /6nm/aAt5uPMLPdobxGTJ8ahOIku1Z3gW+OcvZ6ERk1Av/bvuln09vcnyJIrHGh7eK8n cbGVxmK0aecgSPgIj2NALbHkyuxwj+LEBRV6uiz3THDjxAiNfsO5UFjV59sD+lVSBT3z ThOGE8WEXRnKHuP3FuKXyeUxKBZ2CxpWJpvDuS9EsFkln7zkISYEsRA0nUA6GSGi2Z/n 8YUg== Received: by 10.60.169.197 with SMTP id ag5mr12254920oec.137.1351036287413; Tue, 23 Oct 2012 16:51:27 -0700 (PDT) References: Date: Tue, 23 Oct 2012 19:51:16 -0400 Message-ID: <003a01cdb179$4bb2ca60$e3185f20$@com> MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_NextPart_000_003B_01CDB157.C4A12A60" X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: Ac2xVCHGxoC7DDOkQBK3JSXowHb0EQAEB7agAAA/YKAAAIGcQAAAngfQAABAAPAAAFe7gAAAadvw AALgvLA= Content-Language: en-us X-Gm-Message-State: ALoCoQniMq7Fnh+NlfoWjTJPvKWbkhEaftSaFo9ZVvtRpWufTmhlRDx1a9Jf+wmYcbRh896gygNr The company I am sending email to is a company that uses Google Apps for Teams. This is their apps admin login. Should I be worried about that message? My Settings On the Google apps side I have set my SPF record and set / verified my DKIM key. Here are my outlook settings: Why am I unable to send an attachment with Outlook via SMTP that I am able to send via Gmail / Google Apps?

  Read the article

• Google DNS Same Entry Different Results

  - by Henrik P. Hessel

  Why is this happening? The Rootserver returns a wrong entry I fixed containing 5269.XXX.com. instead of 5269 XXX.com. Macbook @ Home ; <<>> DiG 9.6.0-APPLE-P2 <<>> @8.8.8.8 srv _xmpp-server._tcp.XXX.com. ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 18412 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;_xmpp-server._tcp.XXX.com. IN SRV ;; ANSWER SECTION: _xmpp-server._tcp.XXX.com. 64328 IN SRV 10 0 5269 XXX.com. ;; Query time: 21 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Tue Dec 28 03:16:45 2010 ;; MSG SIZE rcvd: 86 Rootserver ; <<>> DiG 9.6-ESV-R1 <<>> @8.8.8.8 srv _xmpp-server._tcp.XXX.com. ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 27240 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;_xmpp-server._tcp.XXX.com. IN SRV ;; ANSWER SECTION: _xmpp-server._tcp.XXX.com. 52139 IN SRV 0 10 0 5269.XXX.com. ;; Query time: 7 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Tue Dec 28 03:23:23 2010 ;; MSG SIZE rcvd: 91

  Read the article

• Is there a Distributed SAN/Storage System out there?

  - by Joel Coel

  Like many other places, we ask our users not to save files to their local machines. Instead, we encourage that they be put on a file server so that others (with appropriate permissions) can use them and that the files are backed up properly. The result of this is that most users have large hard drives that are sitting mainly empty. It's 2010 now. Surely there is a system out there that lets you turn that empty space into a virtual SAN or document library? What I envision is a client program that is pushed out to users' PCs that coordinates with a central server. The server looks to users just like a normal file server, but instead of keeping entire file contents it merely keeps a record of where those files can be found among various user PCs. It then coordinates with the right clients to serve up file requests. The client software would be able to respond to such requests directly, as well as be smart enough to cache recent files locally. For redundancy the server could make sure files are copied to multiple PCs, perhaps allowing you to define groups in different locations so that an instance of the entire repository lives in each group to protect against a disaster in one building taking down everything else. Obviously you wouldn't point your database server here, but for simpler things I see several advantages: Files can often be transferred from a nearer machine. Disk space grows automatically as your company does. Should ultimately be cheaper, as you don't need to keep a separate set of disks I can see a few downsides as well: Occasional degradation of user pc performance, if the machine has to serve or accept a large file transfer during a busy period. Writes have to be propogated around the network several times (though I suspect this isn't really much of a problem, as reading happens in most places more than writing) Still need a way to send a complete copy of the data offsite occasionally, and this would make it very hard to do differentials Think of this like a cloud storage system that lives entirely within your corporate LAN and makes use of your existing user equipment. Our old main file server is due for retirement in about 2 years, and I'm looking into replacing it with a small SAN. I'm thinking something like this would be a better fit. As a school, we have a couple computer labs I can leave running that would be perfect for adding a little extra redundancy to the system. Unfortunately, the closest thing I can find is Dienst, and it's just a paper that dates back to 1994. Am I just using the wrong buzzwords in my searches, or does this really not exist? If not, is there a big downside that I'm missing?

  Read the article

• Beginner server local installation

  - by joanjgm

  Here's the thing I own a small business and currently my emails are being managed by some regular hosting using cpanel and that I bought a small server and installed windows server and exchange Can you tell what I did wrong here Installed and configured my current existing domain Configured all email address Installed noip in case my public address change In the cpanel of the domain I've added an MX record to the noip domain of the server with priority 0 so now emails are being received by my own server Now whenever I send an email to anyone gmail hotmail etc I get a response that cannot be delivered since may be junk This didn't happen when I sent emails from the hosting What's missing what did I do wrong heres the code mx.google.com rejected your message to the following e-mail addresses: Joan J. Guerra Makaren ([email protected]) mx.google.com gave this error: [186.88.202.13 12] Our system has detected that this message is likely unsolicited mail. To reduce the amount of spam sent to Gmail, this message has been blocked. Please visit http://support.google.com/mail/bin/answer.py?hl=en&answer=188131 for more information. cn9si815432vcb.71 - gsmtp Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may be preventing delivery. Diagnostic information for administrators: Generating server: SERVERMEGA.megaconstrucciones.com.ve [email protected] mx.google.com #550-5.7.1 [186.88.202.13 12] Our system has detected that this message is 550-5.7.1 likely unsolicited mail. To reduce the amount of spam sent to Gmail, 550-5.7.1 this message has been blocked. Please visit 550-5.7.1 http://support.google.com/mail/bin/answer.py?hl=en&answer=188131 for 550 5.7.1 more information. cn9si815432vcb.71 - gsmtp ## Original message headers: Received: from SERVERMEGA.megaconstrucciones.com.ve ([fe80::9096:e9c2:405b:6112]) by SERVERMEGA.megaconstrucciones.com.ve ([fe80::9096:e9c2:405b:6112%10]) with mapi; Thu, 29 May 2014 11:32:19 -0430 From: prueba <[email protected]> To: "Joan J. Guerra Makaren" <[email protected]> Subject: Probando correos Thread-Topic: Probando correos Thread-Index: Ac97V1eW4OBFmoqJTRGoD7IPTC2azg== Date: Thu, 29 May 2014 16:04:35 +0000 Message-ID: <[email protected]> Accept-Language: en-US, es-VE Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: Content-Type: multipart/alternative; boundary="_000_000f42494487966276f7b241megaconstruccionescomve_" MIME-Version: 1.0

  Read the article

• Single domain name potentially resolving to multiple servers

  - by Jace

  first time here at Server Fault, and I apologize in advance that this domain stuff is not really my strength. Any and all suggestions are much appreciated. I am completely lost and incredibly tired! I've inherited an incredibly convoluted system from my predecessor, and I'm trying to find a way to solve it - or I need to be told that it just isn't possible. I've got an old site on ServerA (some kind of Linux distribution), with the domain SomeDomain.com There is a new site sitting on ServerB (Ubuntu), with the intention of having SomeDomain.com to serve it in the future (it is replacing the old site) ServerA also has a web app that is currently in use by other departments within the company (accessible at SomeDomain.com/web-app/) The goal: To have SomeDomain.com and all extensions of this domain name (sub-domains, URL's etc.) serve the new site on ServerB. BUT, the URL SomeDomain.com/web-app/ must serve the Web App on ServerA. The Catch: The ServerA is a shared server with a hosting company with VERY limiting restrictions in place - I cannot adjust DNS settings (apart from Name servers - but cannot set A records or anything, I have full access to ServerB to do as I wish). Therefore the web-app MUST be served from SomeDomain.com/web-app/ and not from a sub-domain or anything. These limitations make migrating the web-app from Server A to Server B rather undesirable, AND this web-app will be replaced in the near future, so it isn't worth the effort right now. Therefore, ultimately I will want 1 domain name to resolve to Server B's IP address most of the time, but in the event that the URL is SomeDomain.com/web-app/, it should resolve to Server A's IP. Note: The domain names don't, technically, have to resolve to one IP or another - but ultimately the URL's must stay consistent Some things I have tried: I've looked into mod_rewrite and .htaccess to try and achieve this effect, but it doesn't look like it's going to work for me - but I may have done it wrong (On Server B, I just checked if the request URI was /web-app/ and tried to serve the /web-app/ folder on Server A) I do have the ability to modify the name servers on both servers I am not able to make a sub domain on Server A that points back to Server A (I assume because the hosting company's servers use the URL to determine what site the serve). I figured this could be good as I'd could set an A record on Server B to point to the web app on Server A - but alas, Server A requires SomeDomain.com. If there is any more information I can give, please let me know. I need a nudge in the right direction, ideas or a solution.

  Read the article

• What router hardware or software should be used when multiple public IPs are routed into the same LAN?

  - by lcbrevard

  I am looking for recommendations to replace a set of consumer grade (Linksys, Netgear, Belkin) routers with something that can handle more traffic while routing more than one static public IP into the same LAN address space. We have a block of static public IPs, 5 usable, with Comcast Business. Currently four of them are in use for: General office access Web server Mail and DNS servers Download and backup web server for separate business All systems (a mixture of physical and virtual) are in the same LAN address space (10.x.y.0/24) to enable easy access between them inside the office. There are 30 or more systems in use depending on which virtual machines are currently active. We have a mixture of Windows, Linux, FreeBSD, and Solaris. Currently a separate consumer grade router is used for each of the four static addresses, with its WAN address set to the specific static address and a different gateway address for each: uses 10.x.y.1 - various ports are forwarded to various LAN IPs on systems with gateway 10.x.y.1 uses 10.x.y.254 - port 80 is forwarded to a server with gateway 10.x.y.254 uses 10.x.y.253 - ports for mail and dns are forwarded to a server with gateway 10.x.y.253 uses 10.x.y.252 - ports as needed are forwarded to server with gateway 10.x.y.252 Only router 1. is allowed to serve DHCP and address reservation based on the MAC is used for most of the internal "server" IP addresses so they are at fixed values. [Some are set static due to limitations in the address reservation capabilities of router 1.] And, yes, this really does work! But... I am looking for: better DHCP with more capable address reservation higher capacity so I don't have to periodically power cycle the routers One obvious improvement would be to have a real DHCP server and not use a consumer grade router for that purpose. I am torn between buying a "professional" router such as Cisco or Juniper or Sonic Wall verus learning to configure some spare hardware to perform this function. The price goes up extremely rapidly with capabilities for commercial routers! Worse, some routers require licensing based on the number of clients - a disaster in our environment with so many virtual machines. Sorry for such a long posting but I am getting tired of having to power cycle routers and deal with shifting IP addresses afterwards!

  Read the article

• What DNS server to use for dynamic load-balancing of website?

  - by Marki555

  I will have 2 servers in different datacenters (different countries) and I want to use DNS load-balancing mainly for High Availability of website hosted on those 2 servers. It is just ad tracking site, which records hit in local database and returns few lines on html code. I want to return 2 A records each time because of DNS pinning in browsers (if one server fails, browser will try second A record which it has already cached). Both servers will be acting also as DNS servers for redundancy. Now comes my proposed solution: I will use BIND and have both servers as a master for that zone. On each server there will be running script, which will periodically test availability (http) of both servers and remove IP from DNS in case of failure. Now the questions :) 1) Is BIND suitable for this solution? I think BIND performance is good and it is easy to manipulate the zone file via script. And as I will modify the zone only in case of failure/maintenance, the modifications (and thus bind reload) won't be often. 2) I plan to use TTL of 5 minutes. The website will have about 1000-3000 req/s but from distinct clients (each IP only 1-3 requests), so I think the DNS load won't be too much. I suppose their ISPs will cache the responses for those 5 mins. Is there any reason to lower the TTL even more? 3) Is my master-master approach good? Or should I make one of the servers master and the other one slave? Right now each server can monitor both itself and the other one. If only webservice fails, both DNS nodes will notice it. If the whole server fails, then the remaining DNS node will notice it and the failed node will not answer DNS queries anyway. 4) Is it a big issue when one NS server does not respond to queries? If yes, I can make a third DNS, so anytime at least 2 of them would accept queries... 5) Should I rewrite the zone file via script, or just use dynamic DNS update (for example via nsupdateutility)?

  Read the article

• Complete machine freezes...at a loss

  - by user28818

  Guys, We built around 12 machines a few months ago to run Ubuntu. They each have the following specs: ASUS Z8NA-D6 motherboard Dual quad core Intel(R) Xeon(R) CPU E5520 @ 2.27GHz OCZ Mod Extreme Pro 500W power supply 12 GB Kingston RAM Nvidia GeForce 9800 GT graphics card My machine ran well for awhile. However, it started experiencing random lockups. These lockups are not X lockups, they are complete system freezes. The nic stops responding, the magic sysrq buttons won't work. The machine is dead. I first suspected RAM. Memtest86 didn't find anything, but I replaced the RAM anyway. Still, lockups. So I replaced the graphics card. Still, more lockups. They became more and more frequent and started to happen 2-3 times a day. So I replaced the motherboard and power supply in one fell swoop. Suddenly, no more lockups! Woohoo! Except, a week later, in the morning, the machine wouldn't wake up. I reset it, started it up, and the log files showed the last entry at around 11 pm the evening before. This has started occurring with more frequency...now just about every morning I come in, the machine is locked up, and has been since the night before. Yesterday, in the 3 weeks since I replaced the motherboard and power supply, the machine actually locked up on in in mid-work. This is the first time since replacing the two (MB and PS) that this happened while I was using it. All others occurred while I was away. I'm at a loss. Nothing is in syslog or message that would indicate a problem around the time of the lockup. Temps are good...I use lmsensors to monitor and have a script that writes the output to file every minute. They never get that high. The only thing I haven't replaced at this point is the case and the harddrives. I doubt either could be the cause. What would you do if you were in my shoes? Is there a troubleshooting approach I'm missing? For the record, all of the other machines, all eleven of them, don't have any problems. They're all running the same version of Ubuntu (Lucid) that I am. Thanks!

  Read the article

< Previous Page | 664 665 666 667 668 669 670 671 672 673 674 675  | Next Page >