Search Results

Search found 2616 results on 105 pages for 'yi ping'.

Page 67/105 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• How to troubleshoot slow powerconnect 62xx management interface

  - by Hannes

  Our Dell Powerconnect 62xx switches have a very high packetloss on the management interface. I presume this is caused by a new appliance which uses multicast for communication but I am not sure. Our network setup is following: servers a - Dell PC6248 | servers b - Dell PC6248 |- juniper core router servers c - Dell PC6248 | What we see is that the multicast traffic arrives at all servers (but only the servers b use the multicast) and I fear that this multicast traffic floods the switch management interface. The switches' management interfaces are reachable via vlan101, all other traffic is sent over other vlans. When I tcpdump on one of the 2 servers with a vlan 101 ip address, I only get a few arp requests but almost nothing. When I try to ping between these 2 servers, it works like a charm. I would like to know what a good way is to troubleshoot this problem and maybe help me understand what is going wrong on that subnet.

  Read the article

• Is there anything that can be done to make X forwarding over LAN less painful?

  - by Earlz

  I have two *nix machines that I like to remotely do graphical things sometimes with. One of those machines is my Arch Linux media server, and another is my OpenBSD router/general server. My current task was installing a Windows XP over virtual box on my media server. I preferred to do the installation from my main workstation so that I could continue to watch TV from my media server on it's "actual" display. I soon noticed that X forwarding is quite painful though, even over low-latency LAN connections. Are there any settings I can tweak to make it a bit less painfully slow, jittery, and laggy? My LAN is rather small, 100Mbit, and ping times to the other box average at about 0.15ms. Also, I know Virtualbox has a VNC mode it can use instead of doing X forwarding, but this particular task was just an example

  Read the article

• Decreasing lagging on router, while gaming

  - by user2699451

  I had absolutely no idea where to post this question and get a professional answer for it but here goes... Okay, so I guess everyone whos is reading this had played online, and so I was playing LoL again tonight and my brother decided that now was a great time to go on youtube and start watching a movie, so my ping (connecting from South Africa to EU west server) is around 190-220 average, however it started spiking to 2000 and average was 600-800, so it arised the question, how ther hell can I "kick" him off for the time being I tried reasoning it out with him but its like playing chess with a pigeon, he's studying to be an engineer, and I just cant win an argument with him, so i need to step it up a level... I have in the past used the aireplay method by sending deauth packets but it only helped so much, is there another way of either kicking a peer of the local wifi or decreasing the lag spikes while in session or even splitting the bandwidth equally in 2 or 3,etc What do I do p.s. sorry if off topic, if it is not appropriate, just say which website will be able to help or assist me...

  Read the article

• Nagios: Which services should I monitor on different roles of servers?

  - by Itai Ganot

  I've started working in a new workplace and my first task is to build a Nagios server and configure it to monitor the servers in the network. Since I'm starting from scratch I wanted to hear from you, experienced users, which checks should I configure for each role? For example, there are some basic checks which I run on each Linux machine I monitor: SSH, Ping, Load, Current Users, Swap Usage, etc... Now my question is, which specific checks should I run for a DataBase server, for a Networking Switch, for Httpd servers? (I currently monitor how many httpd processes are running) Thanks in advance

  Read the article

• Best practice for scaling a single application source to multiple nodes

  - by Andrew Waters

  I have an application which needs to scale horizontally to cover web and service nodes (at the moment they're all on one) but interact with the same set of databases and source files (both application code and custom assets). Database is no problem, it's handled already with replication in MongoDB. Also, the configuration of the servers are the same (100% linux). This question is literally about sharing a filesystem between machines so that its content is always correct, regardless of the node accessing it. My two thoughts have so far been NFS and SAN - SAN being prohibitively expensive and NFS seeing some performance issues on the second node with regards to glob()ing in PHP. Does anyone have recommended strategies or other techniques that don't involved sharding data across nodes or any potential gotchas in NFS that may cause slow disk seek times? To give you an idea of the scale, the main node initialises it's application modules in ~ 0.01 seconds. The secondary is taking ~2.2 seconds. They're VM's inside a local virtual network in ESXi and ping time between them is ~0.3ms

  Read the article

• Cannot connect to telnet server

  - by BloodPhilia

  So, I can't use telnet to connect to any server but it works fine from a different computer. It just says it can't connect. I tried the following things: Disable firewall and AV protection. (Basically, there was no security feature left online) Telnet is set to "Trusted" in my AV protection. (Kaspersky Internet Security 2011) Using Putty to telnet, but apparently Putty's connection is also inhibited. (Says it can't connect to host) Disabling the telnet client in Control Panel and then re-enabling it. (Windows 7 Ultimate) hosts file is clean. Checked for nasties using MBAM and KIS 2011 as well as going though my HijackThis logs, nothing found. I can connect to the same machines/servers through the web browser, ping, tracert, etc. Only telnet seems to be blocked. Any other thoughts?

  Read the article

• Windows Server 2003 - passwordless access to \\myhost\ but not \\myhost.mydomain.net\

  - by Charles Duffy

  I have a Windows Server 2003 system on which passwordless access to local UNC paths is possible using the server's unqualified hostname or its IP address, but not via its FQDN -- even when the hosts file is used to map that FQDN directly to 127.0.0.1. That is: \\127.0.0.1\ - passwordless \\myhost\ - passwordless \\myhost.mydomain.com\ - brings up an authentication dialog Unfortunately, I have a local application trying to resolve UNC paths including the host's FQDN. I've tried resolving myhost.mydomain.com to 127.0.0.1 in both hosts and lmhosts, and calling ping myhost.mydomain.com at the command prompt gives the appearance that this resolution has taken effect; even so, attempting to open \\myhost.mydomain.com\ from Windows Explorer brings up a password prompt, while \\127.0.0.1\ does not. The system is using an OpenDirectory server (Apple's Kerberos+LDAP directory service) for authentication.

  Read the article

• make sure i've configured dns correctly

  - by user22817

  Hi, On my server with Windows Server 2008, i've added a new zone with my new domain: biografica.ro. I've added a name server for it: ns.biografica.ro and the ip of the server. Also i added two A hosts for ns.biografica.ro and www.biografica.ro. I've also defined first that name server on the site where i bought the domain and pointed it to my ip. Now, i understood that i have to wait 24-48 hours for this new domain to be available online. Question: - is this a way to check on the server that i've succesfully configured it? For instance: nslookup biografica.ro or nslookup www.biografica.ro or ping www.biografica.ro do not work locally, on the server... Can you give me an advice? Thanks.

  Read the article

• What can cause peaks in pagetables in /proc/meminfo ?

  - by Fuzzy76

  I have a gameserver running Debian Lenny on a VPS host. Even when experiencing a fairly low load, the players start experiencing major lag (ping times rise from 50 ms to 150-500 ms) in bursts of 3 - 10 seconds. I have installed Munin server monitoring, but when looking at the graphs it looks like the server has plenty of CPU, RAM and bandwidth available. The only weird thing I noticed is some peaks in the memory graph attributed to "page_tables" which maps to PageTables in /proc/meminfo but I can't find any good information on what this might mean. Any ideas what might be causing this? If you need any more graps, just let me know. The interrupts/second count is at roughly 400-600 during this period (nearly all from eth0). The drop in committed was caused by me trying to lower the allocated memory for the server from 512MB to 256MB, but that didn't seem to help.

  Read the article

• Check availability of my websites

  - by DeChinees

  Hi, How can I check the availability of websites from hosted by company? Ping the server and checking if the services for IIS or Apache/Tomcat is not enough. I want to see if the sites are responsive, if I can login. My idea is to build a script using cURL to access the websites and parse for certain words. However using cURL to access a secure site (HTTPS://www.fleetagent.be) doesnt seem to work. cURL might not be the best tool! Any ideas how to check the availability of this website? Thanks in advance, Darrell

  Read the article

• Trouble Connecting to Virtual Machine after IP address Change

  - by David

  I have a VMware image running a copy of Fedora 11 which is hosted on a remote server. The remote server recently had its IP address change. I'm now unable to connect to my virtual machine. The server admin assures me that my virtual machine is running and assigned the new IP address. I have checked the firewalls and had the remote admin restart the VM instance. Neither of these fixed the problem. How do I troubleshoot a remote server which I am unable to SSH to? I'm actually even unable to ping the remote IP (connection timed out).

  Read the article

• Untangle VPN setup, how to see internal addresses?

  - by NFS user

  So Untangle is setup as the default gateway at 192.168.100.1/24, it is the authorative DHCP server issuing addresses from 192.168.100.100 to 192.168.100.200 and is successfully connected to the Internet. Untangle uses OpenVPN for remote access. Accessing the VPN gives me the address 192.168.40.5. However, I cannot ping any machines on the internal 192.168.100.x network remotely. Clearly, there is something basic that I am missing. What is it and how is it solved? Update: The VPN was not setup with the internal network. Since Untangle only allows editing the VPN setup once, the VPN had to be removed and reinstalled with the internal network exported. Now it works. The lesson is that the internal network must be setup before configuring the VPN.

  Read the article

• No DNS resolving with VPN (RRAS)

  - by Sven

  I have a RRAS server setup on a Windows 2003 machine with two NIC's. The VPN works like a charm, I can ping all the other computers on the network. But it fails when I try to access resources with hostnames. I searches for a solution but the ones I found are about RRAS setup with a remote DHCP server. But in my case it's the RRAS server that hands out the ip addresses (option for redirection for WINS, DNS is ON and set to the LAN NIC). I also heard something about FQDN.. but I don't really understand what that is.

  Read the article

• Linksys WRT54GS V6 Router Blinking Power Light

  - by Frank

  I have a Linksys WRT54GS V6 Router in my possession got it at my local goodwill for 5$. Upon start up the Power LED starts flashing like crazy and at the same time the Ethernet ports all light up once then turn off (DMZ and WLAN never turn on). I can ping the router only by setting a static IP on my Pc. I can also successfully push a file (official Linksys OS and DD-wrt) into it via TFTP but this currently does nothing (no 192.1681.1 Access). Any ideas as to what may be wrong? I think its pretty obvious that it's bricked but.. I keep hearing a whole lot of "if it pings it's fixable" on the internet.

  Read the article

• Approach for monitoring internet backbone traffic volume

  - by Greg Harman

  I'm interested in getting a picture of relative volume across different internet backbones. In particular, I'd like to see how traffic volume over a given route differs over the course of a day or from one day to the next. InternetTrafficReport.com is the closest approximation to this that I've found online, and their approach is to test ping times to a number of key routers from several geographically-dispersed servers. This sounds like one straightforward way to measure, but I don't have several geographically-dispersed servers. Is there a different approach for sampling this type of information from a single server?

  Read the article

• How much the distance and ms can affect on the download speed ?

  - by Prix

  Let's consider A (client) and B (server) where A makes download from B. How much can a bad routing from A to B affect the download speed ? For example A does a tracert to B and get a response of 10 steps where the avg ms is around 300 with 10% packet loss at the 4 step and when the connection is normal the avg from A to B is 10 ~ 30 ms. Could this sort of impact reduce A download speed drasticaly or as long as both side and routes have enough link for the full speed of A from B and vice-versa it should maintain the same speed ? Besides tracert and the ping analyse of A to B what else is used to identify the problem ? If you need extra information please let me know.

  Read the article

• A home router for torrents, gaming, webbing and detailed QoS [closed]

  - by Cawas

  I want to plug in an external HD on it to torrent up never ending (mostly for seeding), with lowest priority. It should even automatically completely stop if it disturbs my net usage, and go back in later. And I want to be able to give gaming (or my computer) the highest priority, because of its ping requirements. It should be above even of Skype and any voip, which also have high priority. Web surfing and "youtubing" comes in the middle - it won't matter much if it delays a second or two. Finally, interface as simple as possible. It's fine if it's command line setup, but it needs to have a GUI. What are my options for routers / firmwares as described? Maybe Gargoyle? Or even Time Capsule? It seems to me good old DD-WRT isn't the best option out there anymore. I wonder what else could cover these grounds.

  Read the article

• teamviewer display is slow to refresh

  - by brunoais

  I'm using teamviewer from time to time to connect my portable computer with my desktop computer when I need to check on something (personal use). One of the main things I've been noticing is that it is quite slow transfering the screen updates that keep happening. This happens more frequently when I'm moving full windows or when I open a window or when watching a small movie clip. I've tested the lowest maximum p2p speed I ever got in the last week between both and it is the desktop's upload speed of 6MB/s with the ping of 40ms (usually ~15 ms). With this I was expecting to have very sharp image and fast transfer speeds which is not what is happening. Just to clarify, both computer's individual core's CPU is not reaching its peak (25%) while teamviewer is active, so the encryption and decryption is not the cause. Why my connection between both computers so slow?

  Read the article

• Not able to access other machines on network

  - by TheVillageIdiot

  Hi I'm running Windows 7 Enterprise (32bit) on my laptop. For some time I'm not able to access other machines using \\192.168.xxx.xxx. I've installed VM Ware player on my machine few days back but I don't remember if it happened just after that or there is some other reason behind it. EDIT:- I've disabled VMWare Bridge Protocol but still no effect. Please help me. PS:- I've used both wireless and wired networks. Network sharing is enabled and I can ping other machines but cannot access network shares. I get following message: \\xxx.xxx.xxx.xxx You might not have permission to use this network resource. Contact the administrator of this server to find out if you have acess permissions. The request is not supported. EDIT (2):- Network Discovery, File and Printer Sharing, Folder sharing are all on.

  Read the article

• Slow website load with CNAME, fast when using IP

  - by Nate Strandberg

  I setup two DNS servers on my network: ns1.byte-werx.com && ns2.byte-werx.com I can ping the DNS servers and get a fairly good response time, when I dig them I also get a fairly reasonable response, but any website I filter through them is painfully slow (an upwards of 20+ seconds) -- verifiable by performing a tracert or attempting to access the URL in a browser. The DNS servers are running CentOS 6.3 and BIND9 with 500MB of memory (I figure that should be more than enough?). I have a reverse look-up zone (1.168.192) along with two website zones (www.byte-werx.com and www.stayhomedental.com) If I access the websites using their IP the page loads nearly instantly so I do not believe the issue is with the hosting server, but that is running Ubuntu Server 12.04 and Apache2 with 12GB memory. Any thoughts? I do not have the named.conf file in front of me but I can edit this post to include it if you feel it would be useful. Thanks for any advice!

  Read the article

• How to get rid of NAT in a LAN?

  - by Alberto

  Currently the LAN I manage is organized as follows: internal network (192.168.1.0) which uses a Linux server as a gateway (internal address on interface br0 192.168.1.1, external address on interface br1 10.0.0.2) through NAT; then the 10.0.0.0 network has another gateway (10.0.0.1) which through another NAT connects the whole thing to the internet. What I would like to achieve is to configure the Linux server so that the first layer of NAT is no more necessary, so that for example a computer in the 10.0.0.0 network can ping every computer in the 192.168.1.0 network. I deleted this iptables rule: iptables -t nat -A POSTROUTING -o br1 -j SNAT --to-source 10.0.0.2, but of course now computers on 192.168.1.0 cannot reach the internet; ip forwarding is of course enabled. What's missing here? Thanks

  Read the article

• Trouble Connecting to Virtual Machine after IP address Change

  - by David

  I have a VMware image running a copy of Fedora 11 which is hosted on a remote server. The remote server recently had its IP address change. I'm now unable to connect to my virtual machine. The server admin assures me that my virtual machine is running and assigned the new IP address. I have checked the firewalls and had the remote admin restart the VM instance. Neither of these fixed the problem. How do I troubleshoot a remote server which I am unable to SSH to? I'm actually even unable to ping the remote IP (connection timed out).

  Read the article

• Apply SetEnvIf after Apache RewriteRule

  - by coneybeare

  I have a working apache rewrite rule: RewriteCond %{HTTP_HOST} ^.*foo.com RewriteRule (.*) http://bar.com$1 [R=301,QSA,L] and some working dontlog SetEnvIfs: SetEnvIf Request_URI "^/server-status$" dontlog SetEnvIf Request_URI "^/home/ping$" dontlog SetEnvIf Request_URI "^/haproxy-status$" dontlog SetEnvIf User-Agent ".*internal dummy connection.*" dontlog CustomLog /var/log/apache2/access.log combined env=!dontlog but I can't figure out how to stop the RewriteRule from logging a duplicate line. foo.com and bar.com are both on the same machine. I would expect this rule to work, but it did not: SetEnvIf Host "foo.com" dontlog I still get duplicates in the Apache Log: 10.250.18.97 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" 68.194.30.42 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" .... where 10.250.18.97 is the server's IP. How can I prevent that RewriteRule from logging?

  Read the article

• Ejabberd Clustering on EC2

  - by Architact

  I am trying to implement ejabberd clustering on Amazon EC2 instances, I have installed ejabberd and it is working fine on both instances, I can connect and send message, my first server is a master server and has the FQDN of master.example.com, second server is a slave and has FQDN of slave.example.com. I have edited the ejabberdctl.cfg file on both instances changed INET_DIST_INTERFACE on both instances to the value returned by ifconfig changed ERLANG_NODE to [email protected] on master and [email protected] on slave. Now when I run this command on slave net_adm:ping('[email protected]'). it always returns pang response indicating that it can't reach the master server. I am looking for possible fixes for that. Things already done Both master and slave domains are pointing to their instances I even tried allocating elastic ip and assigning that to instances, but did not help either. Any help will be greatly appreciated.

  Read the article

• Cannot connect to telnet server

  - by BloodPhilia

  So, I can't use telnet to connect to any server but it works fine from a different computer. It just says it can't connect. I tried the following things: Disable firewall and AV protection. (Basically, there was no security feature left online) Telnet is set to "Trusted" in my AV protection. (Kaspersky Internet Security 2011) Using Putty to telnet, but apparently Putty's connection is also inhibited. (Says it can't connect to host) Disabling the telnet client in Control Panel and then re-enabling it. (Windows 7 Ultimate) hosts file is clean. Checked for nasties using MBAM and KIS 2011 as well as going though my HijackThis logs, nothing found. I can connect to the same machines/servers through the web browser, ping, tracert, etc. Only telnet seems to be blocked. Any other thoughts?

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >