Search Results

Search found 41497 results on 1660 pages for 'fault'.

Page 671/1660 | < Previous Page | 667 668 669 670 671 672 673 674 675 676 677 678  | Next Page >

  • Multicast hostname lookups on OSX

    - by KARASZI István
    I have a problem with hostname lookups on my OSX computer. According to Apple's HK3473 document it says for v10.6: Host names that contain only one label in addition to local, for example "My-Computer.local", are resolved using Multicast DNS (Bonjour) by default. Host names that contain two or more labels in addition to local, for example "server.domain.local", are resolved using a DNS server by default. Which is not true as my testing. If I try to open a connection on my local computer to a remote port: telnet example.domain.local 22 then it will lookup the IP address with multicast DNS next to the A and AAAA lookups. This causes a two seconds lookup timeout on every lookup. Which is a lot! When I try with IPv4 only then it won't use the multicast queries to fetch the remote address just the simple A queries. telnet -4 example.domain.local 22 When I try with IPv6 only: telnet -6 example.domain.local 22 then it will lookup with multicast DNS and AAAA again, and the 2 seconds timeout delay occurs again. I've tried to create a resolver entry to my /etc/resolver/domain.local, and /etc/resolver/local.1, but none of them was working. Is there any way to disable this multicast lookups for the "two or more label addition to local" domains, or simply disable it for the selected subdomain (domain.local)? Thank you!

    Read the article

  • FreeBSD high load loopback interface

    - by user1740915
    I have a problem with a FreeBSD server. There is a FreeBSD 9.0 amd64, two network cards em1 (internet), em0 (local network) configured firewall ipfw, natd, squid (not transparent), the server acts as a gateway for access to the Internet. Next problem: upload via squid is very low. At this moment I see next: natd, dhcpd load the cpu at that time when uploading through squid and there are a lot of traffic through the loopback interface. ipfw show output 0100 655389684 36707144666 allow ip from any to any via lo0 00200 0 0 deny ip from any to 127.0.0.0/8 00300 0 0 deny ip from 127.0.0.0/8 to any 00400 0 0 deny ip from any to ::1 00500 0 0 deny ip from ::1 to any 00600 4 292 allow ipv6-icmp from :: to ff02::/16 00700 0 0 allow ipv6-icmp from fe80::/10 to fe80::/10 00800 1 76 allow ipv6-icmp from fe80::/10 to ff02::/16 00900 0 0 allow ipv6-icmp from any to any ip6 icmp6types 1 01000 0 0 allow ipv6-icmp from any to any ip6 icmp6types 2,135,136 01100 1615 76160 deny ip from 192.168.1.1 to any in via em1 01200 0 0 deny ip from 199.69.99.11 to any in via em0 01300 46652 3705426 deny ip from any to 172.16.0.0/12 via em1 01400 3936404 345618870 deny ip from any to 192.168.0.0/16 via em1 01500 4 336 deny ip from any to 0.0.0.0/8 via em1 01600 4129 387621 deny ip from any to 169.254.0.0/16 via em1 01700 0 0 deny ip from any to 192.0.2.0/24 via em1 01800 917566 33777571 deny ip from any to 224.0.0.0/4 via em1 01900 147872 22029252 deny ip from any to 240.0.0.0/4 via em1 02000 1132194739 1190981955947 divert 8668 ip4 from any to any via em1 02100 3 248 deny ip from 172.16.0.0/12 to any via em1 02200 35925 2281289 deny ip from 192.168.0.0/16 to any via em1 02300 1808 122494 deny ip from 0.0.0.0/8 to any via em1 02400 3 174 deny ip from 169.254.0.0/16 to any via em1 02500 0 0 deny ip from 192.0.2.0/24 to any via em1 02600 0 0 deny ip from 224.0.0.0/4 to any via em1 02700 0 0 deny ip from 240.0.0.0/4 to any via em1 02800 960156249 1095316736582 allow tcp from any to any established 02900 64236062 8243196577 allow ip from any to any frag 03000 34 1756 allow tcp from any to me dst-port 25 setup 03100 193 11580 allow tcp from any to me dst-port 53 setup 03200 63 4222 allow udp from any to me dst-port 53 03300 64 8350 allow udp from me 53 to any 03400 417 24140 allow tcp from any to me dst-port 80 setup 03500 211 10472 allow ip from any to me dst-port 3389 setup 05300 77 4488 allow ip from any to me dst-port 1723 setup 05400 3 156 allow ip from any to me dst-port 8443 setup 05500 9882 590596 allow tcp from any to me dst-port 22 setup 05600 1 60 allow ip from any to me dst-port 2000 setup 05700 0 0 allow ip from any to me dst-port 2201 setup 07400 4241779 216690096 deny log logamount 1000 ip4 from any to any in via em1 setup proto tcp 07500 21135656 1048824936 allow tcp from any to any setup 07600 474447 35298081 allow udp from me to any dst-port 53 keep-state 07700 532 40612 allow udp from me to any dst-port 123 keep-state 65535 1990638432 1122305322718 allow ip from any to any systat -ifstat when uploading via squid Load Average ||| Interface Traffic Peak Total tun0 in 79.507 KB/s 232.479 KB/s 42.314 GB out 2.022 MB/s 2.424 MB/s 59.662 GB lo0 in 4.450 MB/s 4.450 MB/s 43.723 GB out 4.450 MB/s 4.450 MB/s 43.723 GB em1 in 2.629 MB/s 2.982 MB/s 464.533 GB out 2.493 MB/s 2.875 MB/s 484.673 GB em0 in 240.458 KB/s 296.941 KB/s 442.368 GB out 512.508 KB/s 850.857 KB/s 416.122 GB top output PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 66885 root 1 92 0 26672K 2784K CPU3 3 528:43 65.48% natd 9160 dhcpd 1 45 0 31032K 9280K CPU1 1 7:40 32.96% dhcpd 66455 root 1 20 0 18344K 2856K select 1 119:27 1.37% openvpn 16043 squid 1 20 0 44404K 17884K kqread 2 0:22 0.29% squid squid.conf cat /usr/local/etc/squid/squid.conf # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 192.168.1.1:3128 # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/squid/cache 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/squid/cache I understand that the traffic passes through the SQUID several times. But can not find why.

    Read the article

  • Installing gitlab on Debian 6.0.5

    - by helmus
    I am using following directions in an attempt to install gitlab on Debian 6.0.5 https://github.com/gitlabhq/gitlabhq/blob/stable/doc/installation.md I am getting an error when i'm running following command sudo -u gitlab bundle exec rake gitlab:app:setup RAILS_ENV=production WARNING: #<ArgumentError: Illformed requirement ["#<Syck::DefaultKey:0x00000004b52198> 1.1.4"]> # -*- encoding: utf-8 -*- Gem::Specification.new do |s| s.name = %q{carrierwave} s.version = "0.6.2" s.required_rubygems_version = Gem::Requirement.new(">= 0") if s.respond_to? :required_rubygems_version= s.authors = ["Jonas Nicklas"] ....more error.... s.add_dependency(%q<mini_magick>, [">= 0"]) s.add_dependency(%q<rmagick>, [">= 0"]) end end WARNING: Invalid .gemspec format in '/usr/local/lib/ruby/gems/1.9.1/specifications/carrierwave-0.6.2.gemspec' Could not locate Gemfile Some pointers to what could cause this would be much appreciated, i have only little experience with RoR and it seems to be related to that.

    Read the article

  • xDebug on Zend Server CE under Windows XP

    - by Hippyjim
    I have Zend Server installed on my Windows XP development machine, installed when I was naive and didn't know that Eclipse was going to become so suck so badly for PHP development. I've made the upgrade to Netbeans, but for debugging they only support xDebug. To be fair I've never used "proper" debuggers before, but other folks have raved about them so I thought I'd give it a try. I followed some directions on the Zend forum about how to install xDebug on Zend server, disabling Zend Debugger in the process. The xDebug "custom installation instructions" wizard tells me that my PHP was compiled with an unsupported compiler (MS VC8), and won't let me download anything. I tried a couple of the other xDebug binaries, but they just refused to load. So I'm left without a debugger option. Does anyone know how I can change the compiler of the php version I have installed so I can use a debugger in Netbeans? or how else i can get xDebug to install on Zend Server?

    Read the article

  • Redmine + Backlogs not working on Turnkey Linux (Ubuntu)

    - by Riddler
    I'm trying to get Redmine + Backlogs work, so for starters I took a virtual appliance with Redmine from Turnkey Linux (http://www.turnkeylinux.org/redmine) and installed Backlogs on top of it, following the installation instructions (http://www.redminebacklogs.net/en/installation/ - used method #2). It seems to have installed ok, but when I go to the "Backlogs" tab and attempt to create some stories, this is what I get - first shows some kind of error/warning icon, others continue to display "in progress" icon indefinitely (can't post a screenshot, unfortunately, but you can take a look at it here: http://www.redmine.org/attachments/5329/Backlogs.jpg). None of the stories get actually created - leaving this tab and returning back to it shows empty backlogs. So.. what am I doing wrong, and how to fix this?

    Read the article

  • Apache Proxy HTTP CONNECT method enabled

    - by John
    I'm using Apache as reverse proxy for several different projects. PCI-DSS compliance scanning shows that my Apache is having HTTP CONNECT method enabled. as stated on Acunetix's site - http://www.acunetix.com/vulnerabilities/apache-proxy-http-connect-metho/ As far as I know, CONNECT is used by the web server to tunnel SSL to application server. Any suggestion how should I fix this? Otherwise, anyone know how should I perform the test if my Apache's HTTP CONNECT method is enabled/disabled?

    Read the article

  • How to block own rpcap traffic where tshark is running?

    - by Pankaj Goyal
    Platform :- Fedora 13 32-bit machine RemoteMachine$ ./rpcapd -n ClientMachine$ tshark -w "filename" -i "any interface name" As soon as capture starts without any capture filter, thousands of packets get captured. Rpcapd binds to 2002 port by default and while establishing the connection it sends a randomly chosen port number to the client for further communication. Both client and server machines exchange tcp packets through randomly chosen ports. So, I cannot even specify the capture filter to block this rpcap related tcp traffic. Wireshark & tshark for Windows have an option "Do not capture own Rpcap Traffic" in Remote Settings in Edit Interface Dialog box. But there is no such option in tshark for linux. It will be also better if anyone can tell me how wireshark blocks rpcap traffic....

    Read the article

  • Using public interfaces on a server connected through a GRE tunnel

    - by Evan
    I'm pretty new to networking so please forgive any terminology mistakes. I have 2 servers connected with a GRE tunnel. Server1 (10.0.0.1) ---- Server2 (10.0.0.2) I want to be able to bind to the public IPs on Server2 using Server1. To do this, I setup virtual interfaces with Server2's public IPs on Server1 and then used routing rules on Server1 to route the packets through the GRE tunnel. On Server1: ip rule add from [Server2's first public IP] table gre ip rule add from [Server2's second public IP] table gre ip route add default via 10.0.0.2 dev gre1 table gre This works great and I can see the packets arriving via GRE on Server2. I can see the packet exiting the tunnel on Server2's gre1 device as shown: From Server1: ping -I [Server2's public ip] google.com tcpdump from Server2's GRE tunnel device: 12:07:17.029160 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) [Server2's public ip] > 74.125.225.38: ICMP echo request, id 6378, seq 50, length 64 This is exactly the packet I want. However, I'm not seeing it go out at all on eth0:0 (where Server2's public IP is bound to). I've tried to use routing rules to get packets coming from Server2's public IP (which would be coming out of dev gre1) to go through dev eth0 on the public default gateway and that doesn't work either. I'm at a loss, thank you to anyone who can help.

    Read the article

  • Network to network VPN Centos 5

    - by Atul Kulkarni
    I am trying to follow "http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-vpn.html#s1-ipsec-net2net" I have come up with the following On local router machine: in my ifcfg-ipsec0: ONBOOT=yes IKE_METHOD=PSK DSTGW=10.5.27.1 SRCGW=10.6.159.1 DSTNET=10.5.27.0/25 SRCNET=10.6.159.0/24 DST=205.X.X.X TYPE=IPSEC I have /etc/sysconfig/network-scripts/keys-ipsec0 file in place. On Remote Machine in the cloud if have /etc/sysconfig/network-scripts/ifcfg-ipsec1: TYPE=IPSEC ONBOOT=yes IKE_METHOD=PSK SRCGW=10.5.27.1 DSTGW=10.6.159.1 SRCNET=10.5.27.124/25 DSTNET=10.6.159.0/24 DST=38.x.x.x with its respective /etc/sysconfig/network-scripts/key-ipsec1 file. The DST in both cases are NAT'd external IPs. Is that a problem? I have made changes for port forwarding as well. When I try to bring the interfaces up it gives me output "RTNETLINK answers: Invalid argument". I am confused now and don't know what more to do? Any place I can digup what parameters were wrong? I really appreciate any help I can get. Thanks and Regards, Atul.

    Read the article

  • Puppet: how to use data from a MySQL table in Puppet 3.0 templates?

    - by Luke404
    I have some data whose source-of-truth is in a MySQL database, size is expected to max out at the some-thousands-rows range (in a worst-case scenario) and I'd like to use puppet to configure files on some servers with that data (mostly iterating through those rows in a template). I'm currently using Puppet 3.0.x, and I cannot change the fact that MySQL will be the authoritative source for that data. Please note, data comes from external sources and not from puppet or from the managed nodes. What possible approaches are there? Which one would you recommend? Would External Node Classifiers be useful here? My "last resort" would be regularly dumping the table to a YAML file and reading that through Hiera to a Puppet template, or to directly dump the table in one or more pre-formatted text file(s) ready to be copied to the nodes. There is an unanswered question on SF about system users but the fundamental issue is probably similar to mine - he's trying to get data out of MySQL.

    Read the article

  • Tomcat and IIS 7 both on different ip's and different ports

    - by n00b
    I have Tomcat and IIS 7 installed together on a Windows 2008 server. The machine has two IPs (134.133.1.1 and 134.133.2.2). I want Tomcat to handle 134.133.1.1, on port 80, and IIS to handle both 134.133.2.2, on port 80 AND 134.133.1.1, on port 443, but can't seem to get the last two together (I can get one or the other by themselves on IIS, along with the first IP address on Tomcat). I have configured Tomcat to successfully listen to ip 134.133.1.1, on port 80 with this configuration; <Connector port="80" protocol="HTTP/1.1" address="134.133.1.1" connectionTimeout="20000" redirectPort="8443" /> I also have a site configured in IIS bound to ip 134.133.1.1, on port 443 (SSL). When I turn on IIS, after Tomcat, I can reach both 134.133.1.1:80 (Tomcat) and 134.133.1.1:443 (IIS) successfully (as desired). The problem now comes when I want to introduce a new site via IIS, at the new ip address. In IIS I have setup a new site at IP 134.133.2.2, port 80. I can not start the site. The event log shows this error; Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. The data field contains the error number. I think this is because IIS 7 tries to listen to port 80 on all IPs, and it cant because Tomcat is taking port 80 for 134.133.1.1. From reading, the resolution is to specify the IP address you want IIS to bind on port 80. The problem is, when I add 134.133.2.2 to the iplisten list, then I get a 404 when I try navigating to 134.133.1.1:443. I assume this is because IIS is no longer listening to ANY port on 134.133.1.1. How do I resolve this such that IIS will return both sites? EDIT: Per request my IIS binding for site A is 134.133.2.2 on port 80 (http) and 134.133.2.2 on port 443. For site B in IIS, the binding is 134.133.1.1 on port 443 (https). Note the IPs in this example are just for example purposes, but consistent with my setup.

    Read the article

  • How to rotate log files when running pyapns and twistd

    - by Henrik
    I use pyapns (Iphone push server) which in turn uses twisted (twistd daemon). twistd daemon produces twistd.log files. It rotates them to twistd.log.1, twistd.log.2 and so on when twistd.log reaches 1MB but it doesn't use logrotate so I guess it's built in. The problem is that this continues forever and that old log files are never deleted. This eventually fills my disk. I've tried to use logrotate or similar to rotate the logs, but then I would need to run logrotate very very often since I need to rotate BEFORE twistd.log reaches 1MB. This could happen within a second for all I know depending on how much log is produced. So how could I logrotate without hacking pyapns/twistd scripts?

    Read the article

  • Windows 2008 64bit: applications and explorer always hang

    - by Phil Farthing
    I setup a couple of Window 2008 64bit systems about 5 months ago. Initially all seemed well. Now however, for no apparent reason, things are dog slow, apps hang, explorer hangs, just clicking on something can cause a CPU spike of 100%, and often it's explorer that is eating it up. As I have two on identical hardware, and they experience the same problem, it doesn't seem related to addon software. The only thing these have in common is Kaspersky and I've tried disabling/uninstalling to no avail. There are no useful error messages in the event logs. Actually, the system never even reports app hangs. Sometimes, it similar to what I've seen on Windows 7 systems where the screen goes milky and asks if I want to trouble shoot, that's only when get impatient and click happy. The really odd thing, is that it will NOT do this for a few minutes at a time, and then starts up again. Like I will click on the start menu and browse for the Admin Tools, the start menu will hang at some point and I'll have to wait about a minute, then it's OK. The next time I do this, a few seconds later, it's fine. Every click seems to hang the first time around, then be ok the second time if I do the exact same thing. If anyone has any suggestions, please PLEASE let me know! thanks =)

    Read the article

  • Can I use CNAME with ip address? Why If works (sometimes)?

    - by Maciek Sawicki
    I believe that the easiest answer for the first question is "No, You have "A" for this", but I accidentally setup some subdomain using CNAME pointing to ip address and it worked on few computers in my office. I wonder how it was possible? Now, when I'm checking it from home I have following error: beast:~ viroos$ host somesubdomain.somedomain.com Host somesubdomain.somedomain.com not found: 3(NXDOMAIN) I'm 100% it used to work at my office (currently it looks like it doesn't, but I'm checking it on different machine). Therefore I'm not 100% if it worked due to some special network setup or because I tested it just after adding DNS entry. I know this story sounds, a little crazy/incredibly, but can someone help me solve this puzzle. //edit: I'm adding dig output ; <<>> DiG 9.6-ESV-R4-P3 <<>> somesubdomain.somedomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 60224 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;somesubdomain.somedomain.com. IN A ;; ANSWER SECTION: somesubdomain.somedomain.com. 67 IN CNAME xxx.xxx.xxx.xx1. ;; AUTHORITY SECTION: . 1800 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2012040901 1800 900 604800 86400 ;; Query time: 72 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Tue Apr 10 00:11:01 2012 ;; MSG SIZE rcvd: 136

    Read the article

  • How can I keep track of SQL Server cummulative updates?

    - by Adrian Grigore
    Hi, If I am not mistaken, SQL server cannot be automatically updated via the regular windows backup routine. Instead, there are cummulative updates that need to be installed by hand. I assume this is done for security and stability reasons. Is this correct? If so, how can I keep track of new updates without regularly reading SQL server related blogs? Is there any low-volume newsletter I can subscribe (ideally only announcing critical updates)?

    Read the article

  • How to set the PHP Api Version for phpize

    - by Tom Frost
    I'm upgrading php on my server but I'm running into a problem with phpize and compiling external modules. phpize -v reports: Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20090115 Zend Extension Api No: 220090115 But on my test server (which I'm trying to replicate) I get this: Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 I'm running debian squeeze, pulling the php 5.3.0-2 packages from the experimental repo. The difference betweent he two servers is that the first server has had old verisons of php on it, and the test server was installed with php 5.3.0-2 from the start. I've attempted uninstalling all PHP packages from the first server (using --purge to get rid of all the config files) and re-installing 5.3 fresh, but I'm still having the same issue. Help!

    Read the article

  • How to install smtp/email server to work with php script?

    - by jiexi
    I have this code $mail->IsSMTP(); $mail->SMTPAuth = true; $mail->SMTPSecure = "ssl"; $mail->Host = "mail.craze.cc"; $mail->Port = 465; $mail->Username = "username"; $mail->Password = "pass"; $mail->SetFrom("[email protected]", "craze.cc"); $mail->AddReplyTo("[email protected]", "craze.cc"); $mail->AddAddress($this->email, $this->username); $mail->IsHTML(false); $mail->Subject = "Activate Your Craze.cc Account"; $mail->Body = $message;`enter code here` How i configure my postfix/sendmail or whatever server to actually work and send the mail? This has been driving me insane! I've tried numerous times to configure these servers. I just want to be able to send emails via my php script... Can someone please link me to a guide to get this all going? or just provide help themselves? Maybe there is an alternative way i can use to send my email in the php script? Basically, i need help just getting the emails to send...

    Read the article

  • Distributed File Systems.

    - by GruffTech
    So, I've been reading several articles around ServerFault as well as google. (For Example, this link) My Requirements are very similar to the link above, however i'd like to also have dynamic or at least resizeable file volumes, so if necessary i can add 4-5 servers to the pool, and then expand the volume. Any Distributed File systems that support that, to save me some time? Thanks! LustreFS will be my next test cluster to build. GlusterFS I've build a 3-machine test GlusterFS cluster, However i quickly became aware of several of its limitations that it doesn't seem to make clearly public. One, i can't seem to resize a volume. Once a volume is created, its done. Which seems retarded, why have a fully scalable file system if i can't scale a volume? So maybe i'm doing something wrong. I'm not sure. AmazonS3 while gives the cheapest startup adds too much cost when broken down to per client per month, so its out. Building my own system when prorated over several years with no bandwidth costs makes it significantly cheaper. MogileFS isn't an option as we'd like this server to be a SAN-Replacement, for storing tons of media from a multitude of systems, which for us means it needs to be POSIX compliant so it can be remotely mounted via NFS or CIFS.

    Read the article

  • Shut down windows service based on load

    - by JP
    Hello, I was wondering if there are any free / open source solutions that will start and stop a windows service based on load? I have some pubsub subscriber services that do background work which is not critical. Ideally i would like tot be able to automate things so that these services could start if memory/cpu/disk i/o was under a certain threshold and stop gracefully if that threshold was met. Do you know of any solutions? Thanks JP

    Read the article

  • OpenLDAP with StartTLS broken on Debian Lenny

    - by mr.zog
    I'm trying to get OpenLDAP on Lenny to work with StartTLS. I have a Fedora 13 machine which I'm using as a client for testing. So far the Fedora client is ignoring the 'host' directive in /etc/ldap.conf when I try to connect using ldapsearch. The client wants to connect to 127.0.0.1:389 even if I specify -H ldaps://server.name on when using ldapsearch. /etc/ldap.conf on the client machine is in mode 444. But even when I try connecting locally from an ssh session, I see errors like this: ldap_sasl_interactive_bind_s: Can't contact LDAP server (-1) Someone hit me with a cluebat, plz. Update: you must use ~/.ldaprc for settings such as 'host'. Also, I just used nmap against the ldap server and it showed 636 and 389 in an open state. Here's what prints to screen when I try to connect with, ldapsearch -ZZ –x '(objectclass=*)'+ -d -1 ldap_create ldap_extended_operation_s ldap_extended_operation ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP 192.168.10.41:636 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 192.168.10.41:636 ldap_pvt_connect: fd: 3 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_dump: buf=0x9bdbdb8 ptr=0x9bdbdb8 end=0x9bdbdd7 len=31 0000: 30 1d 02 01 01 77 18 80 16 31 2e 33 2e 36 2e 31 0....w...1.3.6.1 0010: 2e 34 2e 31 2e 31 34 36 36 2e 32 30 30 33 37 .4.1.1466.20037 ber_scanf fmt ({) ber: ber_dump: buf=0x9bdbdb8 ptr=0x9bdbdbd end=0x9bdbdd7 len=26 0000: 77 18 80 16 31 2e 33 2e 36 2e 31 2e 34 2e 31 2e w...1.3.6.1.4.1. 0010: 31 34 36 36 2e 32 30 30 33 37 1466.20037 ber_flush2: 31 bytes to sd 3 0000: 30 1d 02 01 01 77 18 80 16 31 2e 33 2e 36 2e 31 0....w...1.3.6.1 0010: 2e 34 2e 31 2e 31 34 36 36 2e 32 30 30 33 37 .4.1.1466.20037 ldap_write: want=31, written=31 0000: 30 1d 02 01 01 77 18 80 16 31 2e 33 2e 36 2e 31 0....w...1.3.6.1 0010: 2e 34 2e 31 2e 31 34 36 36 2e 32 30 30 33 37 .4.1.1466.20037 ldap_result ld 0x9bd3050 msgid 1 wait4msg ld 0x9bd3050 msgid 1 (infinite timeout) wait4msg continue ld 0x9bd3050 msgid 1 all 1 ** ld 0x9bd3050 Connections: * host: 192.168.10.41 port: 636 (default) refcnt: 2 status: Connected last used: Sun Jun 6 12:54:05 2010 ** ld 0x9bd3050 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0x9bd3050 request count 1 (abandoned 0) ** ld 0x9bd3050 Response Queue: Empty ld 0x9bd3050 response count 0 ldap_chkResponseList ld 0x9bd3050 msgid 1 all 1 ldap_chkResponseList returns ld 0x9bd3050 NULL ldap_int_select read1msg: ld 0x9bd3050 msgid 1 all 1 ber_get_next ldap_read: want=8, got=0 ber_get_next failed. ldap_err2string ldap_start_tls: Can't contact LDAP server (-1)

    Read the article

  • Handling site not found and page not found with dynamic mass virtual hosting

    - by Rick Moynihan
    I have recently setup mass virtual hosting in Apache so that all we need to do is create a directory to create a new vhost. We're then also using wildcard DNS to map all subdomains to the server running our Apache instance. This works excellently, however I'm now having trouble configuring it to fail-over to an appropriate default/error-page when the vhost directory does not exist. The problem appears to be conflated between by my desire to handle the two error conditions: vhost not found i.e. there was no directory found matching the host supplied in the HTTP host header. I'd like this to display an appropriate site not found error page. The 404 page not found condition of the vhost. Additionally I have a specialised "api" vhost in its own vhost block. I've tried a number of variations and none seem to exhibit the behaviour I want. Here's what I'm working with right now: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /var/www/site-not-found ServerName sitenotfound.mydomain.org ErrorDocument 500 /500.html ErrorDocument 404 /500.html </VirtualHost> <VirtualHost *:80> ServerName api.mydomain.org DocumentRoot /var/www/vhosts/api.mydomain.org/current # other directives, e.g. setting up passenger/rails etc... </VirtualHost> <VirtualHost *:80> # get the server name from the Host: header UseCanonicalName Off VirtualDocumentRoot /var/www/vhosts/%0/current # other directives ... e.g proxy passing to api etc... ErrorDocument 404 /404.html </VirtualHost> My understanding is that the first vhost block is used as the default, so I have this here as my catch all site. Next I have my API vhost, and then finally my mass vhost block. So for a domain that doesn't match the first two ServerName's and has no corresponding directory in /var/www/vhosts/ I'd expect it to fall-over to the first vhost, however with this setup, all domains resolve to my default site-not-found. Why is this? By putting the mass-vhost block first, I can get the mass-vhosts to resolve properly, but not my site-not-found vhost... and in this case I can't seem to find a way to distinguish between a page-level 404 in the vhost, and the case where the VirtualDocumentRoot fails to find a vhost directory (this appears to use the 404 also). Any help out of this bind is much appreciated!

    Read the article

  • Munin graphing by CGI

    - by Vaughn Hawk
    I have Munin working just fine, but any time I try to do cgi graphing - it just stops graphing... no errors in the log, nothing. I've followed the instructions here: http://munin-monitoring.org/wiki/CgiHowto - and it should be working - here's my munin.conf setup, at least the parts that matter: dbdir /var/lib/munin htmldir /var/www/munin logdir /var/log/munin rundir /var/run/munin tmpldir /etc/munin/templates graph_strategy cgi cgiurl /usr/lib/cgi-bin cgiurl_graph /cgi-bin/munin-cgi-graph And then the host info yada yada - graph_strategy cgi and cgrurl are commented out in munin.conf - that's because if I uncomment them, graphing stops working. Again, I get no errors in logs, just blank images where the graphs used to be. Comment out cgi? As soon as munin html runs again, everything is back to normal. I'm running the latest version of munin and munin-node - I've tried fastcgi and regular cgi - permissions for all of the directories involved are munin:www-data - and my httpd.conf file looks like this: ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory /usr/lib/cgi-bin/> AllowOverride None SetHandler fastcgi-script Options ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> <Location /cgi-bin/munin-cgi-graph> SetHandler fastcgi-script </Location> Does anyone have any ideas? Without this working, at least from what I understand, Munin just graphs stuff, even if no one is looking at them - you add 100 servers to graph, and this starts to become a problem. Hope someone has ran into this and can help me out. Thanks!

    Read the article

< Previous Page | 667 668 669 670 671 672 673 674 675 676 677 678  | Next Page >