Search Results

Search found 21817 results on 873 pages for 'last child'.

Page 672/873 | < Previous Page | 668 669 670 671 672 673 674 675 676 677 678 679  | Next Page >

  • problems with scrolling a java TextArea

    - by Jonathan
    All, I am running into an issue using JTextArea and JScrollPane. For some reason the scroll pane appears to not recognize the last line in the document, and will only scroll down to the line before it. The scroll bar does not even change to a state where I can slide it until the lines in the document are two greater than the number of lines the textArea shows (it should happen as soon as it is one greater). Has anyone run into this before? What would be a good solution (I want to avoid having to add an extra 'blank' line to the end of the document, which I would have to remove every time I add a new line)? Here is how I instantiate the TextArea and ScrollPane: JFrame frame = new JFrame("Java Chat Program"); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); Container pane = frame.getContentPane(); if (!(pane.getLayout() instanceof BorderLayout)) { System.err.println("Error: UI Container does not implement BorderLayout."); System.exit(-1); } textArea = new JTextArea(); textArea.setPreferredSize(new Dimension(500, 100)); textArea.setEditable(false); textArea.setLineWrap(true); textArea.setWrapStyleWord(true); JScrollPane scroller = new JScrollPane(textArea); scroller.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS); pane.add(scroller, BorderLayout.CENTER); Here is the method I use to add a new line to textArea: public void println(String a) { textArea.append(" "+a+"\n"); textArea.setCaretPosition(textArea.getDocument().getLength()); } Thanks for your help, Jonathan EDIT: Also, as a side note, with the current code I have to manually scroll down. I assumed that setCaretPosition(doc.getLength()) in the println(line) method would automatically set the page to the bottom after a line is entered... Should that be the case, or do I need to do something differently?

    Read the article

  • Apache2 Segfault - need help interpreting this coredump (suspect cause is memcache / php session related)

    - by WayneDV
    Three Apache2 web servers running a PHP 5.2.3 web site. We're using Memcache to cache rendered pages but also as the storage engine of the PHP Sessions. At peak traffic times we're getting Apache segmentation faults on all three web servers and all HTTPD child processes segfault. My gut tells me that the increased Memcache traffic is stopping PHP sessions from being created or cleaned up and thus the processes die. Is it possible for someone to confirm that from the following? : #0 _zend_mm_free_int (heap=0x7fb67a075820, p=0x7fb67a011538) at /usr/src/debug/php-5.3.3/Zend/zend_alloc.c:2018 #1 0x00007fb665d02e82 in mmc_buffer_free (request=0x7fb67a011548) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:50 #2 mmc_request_free (request=0x7fb67a011548) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:169 #3 0x00007fb665d031ea in mmc_pool_free (pool=0x7fb67a00e458) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:917 #4 0x00007fb665d0a2f1 in ps_close_memcache (mod_data=0x7fb66d625440) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_session.c:185 #5 0x00007fb66d1b0935 in php_session_save_current_state () at /usr/src/debug/php-5.3.3/ext/session/session.c:625 #6 php_session_flush () at /usr/src/debug/php-5.3.3/ext/session/session.c:1517 #7 0x00007fb66d1b0c1b in zm_deactivate_session (type=<value optimized out>, module_number=<value optimized out>) at /usr/src/debug/php-5.3.3/ext/session/session.c:2171 #8 0x00007fb66d2a719c in module_registry_cleanup (module=<value optimized out>) at /usr/src/debug/php-5.3.3/Zend/zend_API.c:2150 #9 0x00007fb66d2b1994 in zend_hash_reverse_apply (ht=0x7fb66d629d60, apply_func=0x7fb66d2a7180 <module_registry_cleanup>) at /usr/src/debug/php-5.3.3/Zend/zend_hash.c:755 #10 0x00007fb66d2a5c0d in zend_deactivate_modules () at /usr/src/debug/php-5.3.3/Zend/zend.c:866 #11 0x00007fb66d2541b5 in php_request_shutdown (dummy=<value optimized out>) at /usr/src/debug/php-5.3.3/main/main.c:1607 #12 0x00007fb66d32e037 in php_apache_request_dtor (r=0x7fb67a229658) at /usr/src/debug/php-5.3.3/sapi/apache2handler/sapi_apache2.c:509 #13 php_handler (r=0x7fb67a229658) at /usr/src/debug/php-5.3.3/sapi/apache2handler/sapi_apache2.c:681 #14 0x00007fb6784166f0 in ap_run_handler (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/server/config.c:158 #15 0x00007fb678419f58 in ap_invoke_handler (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/server/config.c:372 #16 0x00007fb6784254f0 in ap_process_request (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/modules/http/http_request.c:282 #17 0x00007fb678422418 in ap_process_http_connection (c=0x7fb67a2193a8) at /usr/src/debug/httpd-2.2.15/modules/http/http_core.c:190 #18 0x00007fb67841e1b8 in ap_run_process_connection (c=0x7fb67a2193a8) at /usr/src/debug/httpd-2.2.15/server/connection.c:43 #19 0x00007fb678429f4b in child_main (child_num_arg=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:662 #20 0x00007fb67842a21a in make_child (s=0x7fb679cd7860, slot=153) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:758 #21 0x00007fb67842aea4 in perform_idle_server_maintenance (_pconf=<value optimized out>, plog=<value optimized out>, s=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:893 #22 ap_mpm_run (_pconf=<value optimized out>, plog=<value optimized out>, s=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:1097 #23 0x00007fb678402890 in main (argc=1, argv=0x7fff6fecacb8) at /usr/src/debug/httpd-2.2.15/server/main.c:740 PHP.INI Follows: [PHP] engine = On short_open_tag = On asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = Off safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL & ~E_DEPRECATED display_errors = Off display_startup_errors = Off log_errors = Off log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = Off html_errors = Off variables_order = "GPCS" request_order = "GP" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 8M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off file_uploads = On upload_max_filesize = 2M allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 sendmail_path = /usr/sbin/sendmail -t -i mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [MySQL] mysql.allow_persistent = On mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_links = -1 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.save_path = "/var/lib/php/session" session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 1 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 1 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.entropy_file = session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 /etc/php.d/memcached.ini : session.save_path="tcp://memcache1:11211?persistent=1&weight=1&timeout=3&retry_interval=15"

    Read the article

  • Proper 'cleartool mkview' for ClearCase Snapshot view creation

    - by Jörg Battermann
    Good afternoon, seems like I am somewhat stuck in CC-land these days, but I have one (hopefully) final question regarding proper CC-handling: When using the CC View Creation Wizard with the two steps / details below, I can create a proper Snapshot view on my machine perfectly fine, however when trying to do the same with the mkview command, it fails... Here are the screenshots of the view creation wizard: Now that results into the (working) following view: cleartool> lsview battjo6r_view2 battjo6r_view2 \\Eh40yd4c\Views\battjo6r_view2.vws cleartool> lsview -long battjo6r_view2 Tag: battjo6r_view2 Global path: \\Eh40yd4c\Views\battjo6r_view2.vws Server host: Eh40yd4c Region: CT_WORK Active: NO View tag uuid:f34cf43f.b4d048df.845d.ed:21:a2:9c:45:ff View on host: Eh40yd4c View server access path: D:\Views\battjo6r_view2.vws View uuid: f34cf43f.b4d048df.845d.ed:21:a2:9c:45:ff View attributes: snapshot View owner: WW005\battjo6r However, when trying to create the view manually via mkview -snapshot -tag battjo6r_view2 -vws \\Eh40yd4c\Views\battjo6r_view2.vws -host Eh40yd4c -hpath D:\Views\battjo6r_view2.vws -gpath \\Eh40yd4c\Views\battjo6r_view2.vws battjo6r_view2 ... I get the following error: cleartool> mkview -snapshot -tag battjo6r_view2 -vws \\Eh40yd4c\Views\battjo6r_view2.vws -host Eh40yd4c -hpath D:\Views\battjo6r_view2.vws -gpath \\Eh40yd4c\Views\battjo6r_view2.vws battjo6r_view2 Created view. Host-local path: Eh40yd4c:D:\Views\battjo6r_view2.vws Global path: \\Eh40yd4c\Views\battjo6r_view2.vws cleartool: Error: Unable to find view by uuid:6f99f7ae.6a5d40e4.ba32.37:8e:e5:a4:ed:18, last known at "<viewhost>:<stg_path>". cleartool: Error: Unable to establish connection to snapshot view "6f99f7ae.6a5d40e4.ba32.37:8e:e5:a4:ed:18": ClearCase object not found cleartool: Warning: Unable to open snapshot view "D:\SnapShotViews\battjo6r_view2". cleartool: Error: Unable to create snapshot view "battjo6r_view2". Removing the view ... Any idea why this is happening? Am I missing something?

    Read the article

  • Android addTextChangedListener onTextChanged not fired when Backspace is pressed?

    - by tsil
    I use addTextChangeListener to filter a list items. When the user enters a character on the editText, items are filtered based on user input. For example, if the user enters "stackoverflow", all items that contains "stackoverflow" are displayed. It works fine except that once the user press backspace to delete character(s), items are no longer filtered until he deletes all characters. For example, my items are: "stackoverflow 1", "stackoverflow 2", "stackoverflow 3", "stackoverflow 4". If user input is "stackoverflow", all items are displayed. If user input is "stackoverflow 1", only "stackoverflow 1" is displayed. Then user deletes the last 2 characters (1 and the space). User input is now "stackoverflow" but "stackoverflow 1" is still displayed and the other items are not displayed. This is my custom filter: private class ServiceFilter extends Filter { @Override protected FilterResults performFiltering(CharSequence constraint) { FilterResults results = new FilterResults(); if (constraint == null || constraint.length() == 0) { // No filter implemented we return all the list results.values = origServiceList; results.count = origServiceList.size(); } else { List<ServiceModel> nServiceList = new ArrayList<ServiceModel>(); for (ServiceModel s : serviceList) { if (s.getName().toLowerCase().contains(constraint.toString().toLowerCase())) { nServiceList.add(s); } } results.values = nServiceList; results.count = nServiceList.size(); } return results; } @Override protected void publishResults(CharSequence constraint, FilterResults results) { if (results.count == 0) { notifyDataSetInvalidated(); } else { serviceList = (List<ServiceModel>) results.values; notifyDataSetChanged(); } } } And how I handle text change event: inputSearch.addTextChangedListener(new TextWatcher() { @Override public void afterTextChanged(Editable arg0) { // TODO Auto-generated method stub } @Override public void beforeTextChanged(CharSequence arg0, int arg1, int arg2, int arg3) { // TODO Auto-generated method stub } @Override public void onTextChanged(CharSequence cs, int arg1, int arg2, int arg3) { if (cs.length() >= 1) { mAdapter.getFilter().filter(cs); } else { mAdapter = new ServiceAdapter(MyActivity.this, R.layout.ussd_list_item, serviceList); listView.setAdapter(mAdapter); } } });

    Read the article

  • django error ,about django-sphinx

    - by zjm1126
    from django.db import models from djangosphinx.models import SphinxSearch class MyModel(models.Model): search = SphinxSearch() # optional: defaults to db_table # If your index name does not match MyModel._meta.db_table # Note: You can only generate automatic configurations from the ./manage.py script # if your index name matches. search = SphinxSearch('index_name') # Or maybe we want to be more.. specific searchdelta = SphinxSearch( index='index_name delta_name', weights={ 'name': 100, 'description': 10, 'tags': 80, }, mode='SPH_MATCH_ALL', rankmode='SPH_RANK_NONE', ) queryset = MyModel.search.query('query') results1 = queryset.order_by('@weight', '@id', 'my_attribute') results2 = queryset.filter(my_attribute=5) results3 = queryset.filter(my_other_attribute=[5, 3,4]) results4 = queryset.exclude(my_attribute=5)[0:10] results5 = queryset.count() # as of 2.0 you can now access an attribute to get the weight and similar arguments for result in results1: print result, result._sphinx # you can also access a similar set of meta data on the queryset itself (once it's been sliced or executed in any way) print results1._sphinx and Traceback (most recent call last): File "D:\zjm_code\sphinx_test\models.py", line 1, in <module> from django.db import models File "D:\Python25\Lib\site-packages\django\db\__init__.py", line 10, in <module> if not settings.DATABASE_ENGINE: File "D:\Python25\Lib\site-packages\django\utils\functional.py", line 269, in __getattr__ self._setup() File "D:\Python25\Lib\site-packages\django\conf\__init__.py", line 38, in _setup raise ImportError("Settings cannot be imported, because environment variable %s is undefined." % ENVIRONMENT_VARIABLE) ImportError: Settings cannot be imported, because environment variable DJANGO_SETTINGS_MODULE is undefined.

    Read the article

  • Send Data Using the WebRequest Class to DotNetOpenAuth website

    - by Denis
    I am trying to send data to DotNetOpenAuth website as described here http://msdn.microsoft.com/en-us/library/debx8sh9.aspx Sender receive (500) Internal Server Error. The same code for blank website without DotNetOpenAuth works fine. Should I tweak something? Here is an exception: System.ArgumentNullException was unhandled by user code Message="Value cannot be null.\r\nParameter name: key" Source="mscorlib" ParamName="key" StackTrace: at System.ThrowHelper.ThrowArgumentNullException(ExceptionArgument argument) at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) at System.Collections.Generic.Dictionary`2.Add(TKey key, TValue value) at DotNetOpenAuth.OAuth.ChannelElements.OAuthChannel.ReadFromRequestCore(HttpRequestInfo request) in c:\BuildAgent\work\7ab20c0d948e028f\src\DotNetOpenAuth\OAuth\ChannelElements\OAuthChannel.cs:line 145 at DotNetOpenAuth.Messaging.Channel.ReadFromRequest(HttpRequestInfo httpRequest) in c:\BuildAgent\work\7ab20c0d948e028f\src\DotNetOpenAuth\Messaging\Channel.cs:line 372 at DotNetOpenAuth.OAuth.ServiceProvider.ReadRequest(HttpRequestInfo request) in c:\BuildAgent\work\7ab20c0d948e028f\src\DotNetOpenAuth\OAuth\ServiceProvider.cs:line 222 Exception occurs on last line of the code: private void context_AuthenticateRequest(object sender, EventArgs e) { // Don't read OAuth messages directed at the OAuth controller or else we'll fail nonce checks. if (this.IsOAuthControllerRequest()) { return; } if (HttpContext.Current.Request.HttpMethod != "HEAD") { // workaround: avoid involving OAuth for HEAD requests. IDirectedProtocolMessage incomingMessage = OAuthServiceProvider.ServiceProvider.ReadRequest(new HttpRequestInfo(this.application.Context.Request));

    Read the article

  • Python MySQL wrong architecture error

    - by phoebebright
    I've been at this for some time and read many sites on the subject. suspect I have junk lying about causing this problem. But where? This is the error when I import MySQLdb in python: >>> import MySQLdb /Library/Python/2.6/site-packages/MySQL_python-1.2.3c1-py2.6-macosx-10.6-universal.egg/_mysql.py:3: UserWarning: Module _mysql was already imported from /Library/Python/2.6/site-packages/MySQL_python-1.2.3c1-py2.6-macosx-10.6-universal.egg/_mysql.pyc, but /Users/phoebebr/Downloads/MySQL-python-1.2.3c1 is being added to sys.path Traceback (most recent call last): File "<stdin>", line 1, in <module> File "MySQLdb/__init__.py", line 19, in <module> import _mysql File "build/bdist.macosx-10.6-universal/egg/_mysql.py", line 7, in <module> File "build/bdist.macosx-10.6-universal/egg/_mysql.py", line 6, in __bootstrap__ ImportError: dlopen(/Users/phoebebr/.python-eggs/MySQL_python-1.2.3c1-py2.6-macosx-10.6-universal.egg-tmp/_mysql.so, 2): no suitable image found. Did find: /Users/phoebebr/.python-eggs/MySQL_python-1.2.3c1-py2.6-macosx-10.6-universal.egg-tmp/_mysql.so: mach-o, but wrong architecture I'm trying for 64 bit so checked here: file $(which python) /usr/bin/python: Mach-O universal binary with 3 architectures /usr/bin/python (for architecture x86_64): Mach-O 64-bit executable x86_64 /usr/bin/python (for architecture i386): Mach-O executable i386 /usr/bin/python (for architecture ppc7400): Mach-O executable ppc file $(which mysql) /usr/local/mysql/bin/mysql: Mach-O 64-bit executable x86_64 Have set my default version of python to 2.6 python Python 2.6.1 (r261:67515, Feb 11 2010, 00:51:29) [GCC 4.2.1 (Apple Inc. build 5646)] on darwin Tried deleting build directory and python setup.py clean Renamed Python/2.5/site-packages so it could not try and pick that up. Run out of ideas. Any suggestions?

    Read the article

  • Eclipse Error On Startup

    - by GuyNoir
    Eclipse was running fine last night, but this morning I tried starting it up and I came upon this error: Here's the log !SESSION 2010-04-07 17:58:37.208 ----------------------------------------------- eclipse.buildId=I20080617-2000 java.version=1.6.0_13 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US Command-line arguments: -os win32 -ws win32 -arch x86 !ENTRY org.eclipse.osgi 4 0 2010-04-07 17:58:37.457 !MESSAGE Startup error !STACK 1 java.lang.NumberFormatException: For input string: "" at java.lang.NumberFormatException.forInputString(Unknown Source) at java.lang.Integer.parseInt(Unknown Source) at java.lang.Integer.parseInt(Unknown Source) at org.eclipse.osgi.storagemanager.StorageManager.updateTable(StorageManager.java:512) at org.eclipse.osgi.storagemanager.StorageManager.open(StorageManager.java:694) at org.eclipse.osgi.internal.baseadaptor.BaseStorage.initFileManager(BaseStorage.java:208) at org.eclipse.osgi.internal.baseadaptor.BaseStorage.initialize(BaseStorage.java:142) at org.eclipse.osgi.baseadaptor.BaseAdaptor.initializeStorage(BaseAdaptor.java:124) at org.eclipse.osgi.framework.internal.core.Framework.initialize(Framework.java:180) at org.eclipse.osgi.framework.internal.core.Framework.<init>(Framework.java:152) at org.eclipse.osgi.framework.internal.core.OSGi.createFramework(OSGi.java:90) at org.eclipse.osgi.framework.internal.core.OSGi.<init>(OSGi.java:31) at org.eclipse.core.runtime.adaptor.EclipseStarter.startup(EclipseStarter.java:286) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:175) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504) at org.eclipse.equinox.launcher.Main.run(Main.java:1236) Any help? I really need this up and running, and reinstalling and resetting all of my plugins and settings just isn't an option at the moment.

    Read the article

  • Problem using Flash Components in multiple SWC files

    - by Ken Dunnington
    [Edit: Short version - how do you properly handle namespace collisions in SWC files if one SWC has fewer classes from that namespace than another?] I have a rather large Flash application which I'm building in Flash Builder (because coding/debugging in the Flash IDE is... not good) and I've got a ton of external SWC files which I'm linking in to my application. This has worked well so far - the file size is on the large side, but it's a lot simpler than loading in SWFs, especially since I am extending most of the classes in each SWC and adding custom code that way (it's a very design-heavy app.) The problem I'm having is when I have Flash Components, like ComboBox or TextInput, in more than one SWC. Whichever SWC was compiled last will work fine, but the others will fail with errors like the following: TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@1f21adc1 to fl.controls.TextInput. at flash.display::Sprite/constructChildren() at flash.display::Sprite() at flash.display::MovieClip() at com.company.design.login::LoginForm() at com.company.view::Login()[/Users/ken/Workspace/src/com/company/view/Login.as:22] at com.company.view::Main/showLogin()[/Users/ken/Workspace/src/com/company/view/Main.as:209] at flash.events::EventDispatcher/dispatchEventFunction() at flash.events::EventDispatcher/dispatchEvent() at com.company.view::Navigation/handleUIClick()[/Users/ken/Workspace/src/com/company/view/Navigation.as:88] I've been researching components, ComponentShim, etc. but I'm running up against a brick wall. I thought it might be the fact that some of the components had their skins modified in the source FLA, so I tried replacing them with the default skins, but that didn't seem to help. How can I ensure that I have the components imported and available to all my classes, yet still be able to skin them and include them in my various FLAs? (I am never creating new instances of them, they are all laid out by my designer.)

    Read the article

  • Segmentation Fault (11) with modwsgi on CentOS 5.7 when running pyramid app

    - by carbotex
    I'm getting Segmentation fault error when trying to access the "Hello World" pyramid app. This error only occurs when running against CentOS 5.7 setup, but no problem whatsoever when tested against OSX and Arch Linux. Could it be a CentOS specific issue? [error] [client 10.211.55.2] Premature end of script headers: pyramid.wsgi [notice] child pid 31212 exit signal Segmentation fault (11) I have tried to follow the troubleshooting guides posted here http://code.google.com/p/modwsgi/wiki/InstallationIssues which suggests that it might caused by missing Shared Library. A quick check reveals that shared library is not the issue. [centos57@localhost modules]$ ldd mod_wsgi.so linux-gate.so.1 => (0x00e6a000) libpython2.7.so.1.0 => /home/python/lib/libpython2.7.so.1.0 (0x0024c000) libpthread.so.0 => /lib/libpthread.so.0 (0x00da8000) libdl.so.2 => /lib/libdl.so.2 (0x00cd6000) libutil.so.1 => /lib/libutil.so.1 (0x00110000) libm.so.6 => /lib/libm.so.6 (0x0085c000) libc.so.6 => /lib/libc.so.6 (0x00682000) /lib/ld-linux.so.2 (0x0012b000) Then I found another clue that might be able to solve my problem. Unfortunately libexpat is not the source of the problem. http://code.google.com/p/modwsgi/wiki/IssuesWithExpatLibrary [centos57@localhost bin]$ ldd ~/httpd/bin/httpd | grep expat libexpat.so.1 => /usr/local/lib/libexpat.so.1 (0x00b00000) [centos57@localhost bin]$ strings /usr/local/lib/libexpat.so.1 | grep expat libexpat.so.1 expat_2.0.1 [centos57@localhost bin]$ python Python 2.7.2 (default, Nov 26 2011, 08:08:44) [GCC 4.1.2 20080704 (Red Hat 4.1.2-51)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import pyexpat >>> pyexpat.version_info (2, 0, 0) >>> I've been pulling my hair out trying to figure out what I'm missing in my setup. Why the problem only occurs with CentOS? Here is the detailed setup: Apache 2.2.19 Python 2.7.2 mod_wsgi-3.3 /home/httpd/conf/extra/pyramid.wsgi from pyramid.paster import get_app application = get_app('/home/homecamera/hcadmin/root/production.ini', 'main') /home/httpd/conf/extra/modwsgi.conf LoadModule wsgi_module modules/mod_wsgi.so WSGIScriptAlias /myapp /home/root/test.wsgi <Directory /home/root> WSGIProcessGroup pyramid Order allow,deny Allow from all </Directory> # Use only 1 Python sub-interpreter. Multiple sub-interpreters # play badly with C extensions. WSGIApplicationGroup %{GLOBAL} WSGIPassAuthorization On WSGIDaemonProcess pyramid user=daemon group=daemon processes=1 \ threads=4 \ python-path=/home/python/lib/python2.7/site-packages WSGIScriptAlias /hello /home/httpd/conf/extra/pyramid.wsgi <Directory /home/httpd/conf/extra> WSGIProcessGroup pyramid Order allow,deny Allow from all </Directory> Again this same setup works on OSX and Arch Linux but not on CentOS 5.7. Could someone out there point me to the right direction before I ran out of my hair. ==================================================================================== When apache started with gdb, I got a couple of warnings Reading symbols from /home/httpd/bin/httpd...done. Attaching to program: /home/httpd/bin/httpd, process 1821 warning: .dynamic section for "/lib/libcrypt.so.1" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/lib/libutil.so.1" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations gdb output. After hitting refresh button, to load pyramid. (gdb) cont Continuing. warning: .dynamic section for "/usr/lib/libgssapi_krb5.so.2" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/usr/lib/libkrb5.so.3" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/lib/libresolv.so.2" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x8edbb90 (LWP 1824)] 0x0814c120 in EVP_PKEY_CTX_dup () apache_error_log [info] mod_wsgi (pid=1821): Starting process 'pyramid' with threads=1. [info] mod_wsgi (pid=1821): Initializing Python. [info] mod_wsgi (pid=1821): Attach interpreter ''. [info] mod_wsgi (pid=1821): Create interpreter 'web.domain.com:20000|/hcadmin'. [info] [client 10.211.55.2] mod_wsgi (pid=1821, process='pyramid', application='web.domain.com:20000|/hcadmin'): Loading WSGI script '/home/httpd/conf/extra/pyramid.wsgi'. [error] hello 1

    Read the article

  • Perl on MacOS X 10.6.2: GDBM_File missing, how to install or work around?

    - by jdmuys
    When I need a Perl module, I typically use CPAN. It works fine. But not this time. I want to use MARC::Charset, but this one uses GDBM_File, and I can't seem to install GDBM_File from CPAN. CPAN finds it all right, but trying to install it, it starts installing the full Perl 5.10.1 distribution. MARC::Charset is a rather old module, so there should be a way to use it from some common Perl version (Mac OS X 10.6.2 has 5.10.0 and 5.8.9 by default). While installing the full blow Perl 5.10.1 is not an option, modifying MARC::Charset to stop using GDBM_File might be one. What would be the best course of action to do so? This last option might also be the only one. googling GDBM_File uncovers a few items that suggest that gdbm is not even available on the Mac. Those items typically went over my head though. While I don't expect a silver bullet, somebody may have a pointer or two on where I should start. After all, MARC::Charset only does character transliteration to/from the marc8 char set, which unfortunately, iconv doesn't seem to support.

    Read the article

  • Parsing HTML using HtmlParser

    - by Blankman
    My html has 20 or so rows of the following HTML pattern. So the below is considered a single instance of the pattern. Each instance of this pattern represents a product. Again the below is a single instance, it spans multiple rows in the HTML table. <table> .. <!-- product starts here, this html comment is not in the real html --> <tr> <td rowspan="5" class="product" valign="top"><nobr> ????????????</td> </tr> <tr> <td class="title" ??????????>?????????</td> <td class="title" ??????????>?????????</td> <td class="title" ??????????>?????????</td> <td class="title" ??????????>?????????</td> <td class="title" ??????????>?????????</td> <td class="title" ??????????>?????????</td> </tr> <tr> <td class="data" ?????? </td> <td class="data" ?????? </td> <td class="data" ?????? </td> <td class="data" ?????? </td> <td class="data" ?????? </td> <td class="data" ?????? </td> </tr> </tr> <tr> <td colspan="5" ????????</td> </tr> <tr> <td colspan="6" width="100%">&nbsp;<hr></td> </tr> <!-- product ends here, this html comment is not in the real html --> <!-- above pattern repeats multiple times in the HTML --> .. <table> I am trying to use HtmlParser for this. Parser rowParser = new Parser(); rowParser.setInputHtml(page.getHtml()); // page object represents a html page rowParser.setEncoding("UTF-8"); NodeFilter productRowFilter = new AndFilter( new TagNameFilter("tr"), new HasChildFilter( new AndFilter( new TagNameFilter("td"), new HasAttributeFilter("class", "product"))) The above filter doesn't work, just showing you what I have so far. I need to somehow combine these filters, and use the last td to mark the end of the pattern i.e. the td with the colspan=6 and width=100% with child element hr. I have been struggling with this, and have resorted to Regex'ing but was told numerous times to NOT use regex for html parsing, so here I am! Your help is much appreciated!

    Read the article

  • How can I line up WPF items in a Horizontal WrapPanel so they line up based on an arbitrary vertical

    - by Scott Whitlock
    I'm trying to create a View in WPF and having a hard time figuring out how to set it up. Here's what I'm trying to build: My ViewModel exposes an IEnumerable property called Items Each item is an event on a timeline, and each one implements ITimelineItem The ViewModel for each item has it's own DataTemplate to to display it I want to display all the items on the timeline connected by a line. I'm thinking a WrapPanel inside of a ListView would work well for this. However, the height of each item will vary depending on the information it displays. Some items will have graphic objects right on the line (like a circle or a diamond, or whatever), and some have annotations above or below the line. So it seems complicated to me. It seems that each item on the timeline has to render its own segment of the line. That's fine. But the distance between the top of the item to the line (and the bottom of the item to the line) could vary. If one item has the line 50 px down from the top and the next item has the line 100 px down from the top, then the first item needs 50 px of padding so that the line segments add up. I think I could solve that problem, however, we only need to add padding if these two items are on the same line in the WrapPanel! Let's say there are 5 items and only room on the screen for 3 across... the WrapPanel will put the other two on the next line. That's ok, but that means only the first 3 need to pad together, and the last 2 need to pad together. This is what's giving me a headache. Is there another approach I could look at?

    Read the article

  • C++ Set Erase Entry Question

    - by Wallace
    Hi. I encountered a problem here. I'm using C++ multiset. This is the test file. Score: 3-1 Ben Steven Score: 1-0 Ben Score: 0-0 Score: 1-1 Cole Score: 1-2 Ben I'm using while loop and ifstream (fin1) to read in from the test file above. multiset<string, less<string> > myset; while(!fin1.eof()) { fin1 >> scoreName; if(scoreName == "Score:") { //calculates number of matches played } else { goalCheck = scoreName.substr(1,1); if(goalCheck == "-") { string lGoal, rGoal; lGoal = scoreName.substr(0,1); rGoal = scoreName.substr(2,1); int leftGoal, rightGoal; leftGoal = atoi(lGoal.c_str()); rightGoal = atoi(rGoal.c_str()); if(leftGoal > rightGoal) //if team wins { //some computations } else if(leftGoal < rightGoal) //if team loses { //computations } else if(leftGoal == rightGoal) //if team draws { //computations } else { myset.insert(myset.begin(), scoreName); } } } I'm inserting all names into myset (regardless of wins/loses/draws) in my last else statement. But I only require the names of those matches who won/draw. Those names whose matches lost will not be included in myset. In the test file above, there's only one match that lost (1-2) and I wanted to remove "Ben". How can I do that? I tried to use myset.erase(), but I'm not sure how to get it point to Ben and remove it from myset. Any help is much appreciated. Thanks.

    Read the article

  • Why does gdb show two different returns?

    - by YuppieNetworking
    Hello all, Last week I was a debugging a code and a weird situation came up: gdb passes through two different return clauses. I made a simple example that illustrates the situation: #include <iostream> using namespace std; int test() { string a = "asd"; string b = "asd"; while (true) { if (a == b) { return 0; } } return -1; } int main() { int result = test(); cout << "result: " << result << endl; } When debugging the code I got: (gdb) b main Breakpoint 1 at 0x1d4c: file example.cpp, line 19. (gdb) r Starting program: /Users/yuppienet/temp/a.out Reading symbols for shared libraries +++. done Breakpoint 1, main () at example.cpp:19 19 int result = test(); (gdb) s test () at example.cpp:7 7 string a = "asd"; (gdb) n 8 string b = "asd"; (gdb) n 11 if (a == b) { (gdb) n 12 return 0; (gdb) n 15 return -1; (gdb) n 16 } (gdb) n main () at example.cpp:20 20 cout << "result: " << result << endl; (gdb) n result: 0 21 } (gdb) n 0x00001ab2 in start () I noted that even if gdb shows line 15, the return value is 0 (the finish command confirms this as well). So the question is: why does gdb show line 15: return -1, even if the function is not really returning this value? Thanks!

    Read the article

  • C#: Sum of even fibonacci numbers

    - by user300484
    Hello you all! im developping an application that will find the sum of all even terms of the fibonacci sequence. The last term of this sequence is 4,000,000 . There is something wrong in my code but I cannot find the problem since it makes sense to me. Can you please help me? using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication1 { class Program { static void Main(string[] args) { long[] arr = new long [1000000] ; long i= 2; arr[i-2]=1; arr[i-1]=2; long n= arr[i]; long s=0; for (i=2 ; n <= 4000000; i++) { arr[i] = arr[(i - 1)] + arr[(i - 2)]; } for (long f = 0; f <= arr.Length - 1; f++) { if (arr[f] % 2 == 0) s += arr[f]; } Console.Write(s); Console.Read(); } } }

    Read the article

  • How to roll the log file on startup in logback

    - by Mike Q
    Hi all, I would like to configure logback to do the following. Log to a file Roll the file when it reaches 50MB Only keep 7 days worth of logs On startup always generate a new file (do a roll) I have it all working except for the last item, startup roll. Does anyone know how to achieve that? Here's the config... <appender name="File" class="ch.qos.logback.core.rolling.RollingFileAppender"> <layout class="ch.qos.logback.classic.PatternLayout"> <Pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{36} - %msg \(%file:%line\)%n</Pattern> </layout> <File>server.log</File> <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> <FileNamePattern>server.%d{yyyy-MM-dd}.log</FileNamePattern> <!-- keep 7 days' worth of history --> <MaxHistory>7</MaxHistory> <TimeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP"> <MaxFileSize>50MB</MaxFileSize> </TimeBasedFileNamingAndTriggeringPolicy> </rollingPolicy> </appender>

    Read the article

  • Exporting from SSRS 2008 ReportViewer to Excel Causes Duplicate Columns

    - by Daniel Coffman
    I have a report that groups months by quarters, so each quarter has three months and the display of the months under the quarter is toggled by the quarter header. It looks just fine in the ReportViewer, but when exporting to Excel the first month in the quarter with data is duplicated and appended to the end of the quarter group. Here is what it looks like in the ReportViewer (with Quarters 2 and 4 expanded, note May and June do not have any data and show blank columns by design): http://i.imgur.com/MykZE.png This is how it looks when exported to Excel: http://i.imgur.com/zfLuk.png The collapsed Quarter should only show the LAST month in the quarter. You can see that in the Excel export July is inserted in Q1 even though it should be hidden entirely since that quarter is collapsed, December is appended to Q2, January is inserted into Q3, and April is duplicated and appended to Q4. Exporting the any format OTHER than Excel works correctly and does not insert these columns. A similar bug for rows was filed and marked as "by design": http://connect.microsoft.com/SQLServer/feedback/details/508823/reporting-services-2008-group-by-export-to-excel-duplicate-rows-csv-ok-pdf-ok How do I stop the export to Excel feature from inserting these duplicate columns?

    Read the article

  • Using the public ssh key from local machine to access two remote users [closed]

    - by Nick
    I have an new Ubuntu (Hardy 8.04) server; it has two users, Alice and Bob. Alice is listed in sudoers. I appended my public ssh key (my local machine's public key local/Users/nick/.ssh/id_rsa.pub) to authorized_keys in remote_server/home/Alice/.ssh/authorized_keys, changed the permissions on Alice/.ssh/ to 700 and Alice/.ssh/authorized_keys to 600, and both the file and folder are owned my Alice. Then added I Alice to sshd_config (AllowUsers Alice). This works and I can login into Alice: ssh -v [email protected] ... debug1: Offering public key: /Users/nick/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 277 debug1: Authentication succeeded (publickey). debug1: channel 0: new [client-session] debug1: Entering interactive session. Last login: Mon Mar 15 09:51:01 2010 from 123.456.789.00 I then copied the authorized_keys file remote_server/home/Alice/.ssh/authorized_keys to remote_server/home/Bob/.shh/authorized_keys and changed the permissions and ownership and added Bob to AllowUsers in sshd_config (AllowUsers Alice Bob). Now when I try to login to Bob it will not authenticate the same public key. ssh -v [email protected] ... debug1: Offering public key: /Users/nick/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /Users/nick/.ssh/identity debug1: Trying private key: /Users/nick/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). Am I missing something fundamental about the way ssh works?

    Read the article

  • Tricky SQL query involving consecutive values

    - by Gabriel
    I need to perform a relatively easy to explain but (given my somewhat limited skills) hard to write SQL query. Assume we have a table similar to this one: exam_no | name | surname | result | date ---------+------+---------+--------+------------ 1 | John | Doe | PASS | 2012-01-01 1 | Ryan | Smith | FAIL | 2012-01-02 <-- 1 | Ann | Evans | PASS | 2012-01-03 1 | Mary | Lee | FAIL | 2012-01-04 ... | ... | ... | ... | ... 2 | John | Doe | FAIL | 2012-02-01 <-- 2 | Ryan | Smith | FAIL | 2012-02-02 2 | Ann | Evans | FAIL | 2012-02-03 2 | Mary | Lee | PASS | 2012-02-04 ... | ... | ... | ... | ... 3 | John | Doe | FAIL | 2012-03-01 3 | Ryan | Smith | FAIL | 2012-03-02 3 | Ann | Evans | PASS | 2012-03-03 3 | Mary | Lee | FAIL | 2012-03-04 <-- Note that exam_no and date aren't necessarily related as one might expect from the kind of example I chose. Now, the query that I need to do is as follows: From the latest exam (exam_no = 3) find all the students that have failed (John Doe, Ryan Smith and Mary Lee). For each of these students find the date of the first of the batch of consecutively failing exams. Another way to put it would be: for each of these students find the date of the first failing exam that comes after their last passing exam. (Look at the arrows in the table). The resulting table should be something like this: name | surname | date_since_failing ------+---------+-------------------- John | Doe | 2012-02-01 Ryan | Smith | 2012-01-02 Mary | Lee | 2012-01-04 Ann | Evans | 2012-02-03 How can I perform such a query? Thank you for your time.

    Read the article

  • How do I stop Python install on Mac OS X from putting things in my home directory?

    - by Rob
    Hi, I'm trying to install Python from source on my Mac. (OS X 10.6.2, Python-2.6.5.tar.bz2) I've done this before and it was easy, but for some reason, this time after ./configure, and make, the sudo make install puts things some things in my home directory instead of in /usr/local/... where I expect. The .py files are okay, but not the .so files... RobsMac Python-2.6.5 $ sudo make install [...] /usr/bin/install -c -m 644 ./Lib/anydbm.py /usr/local/lib/python2.6 /usr/bin/install -c -m 644 ./Lib/ast.py /usr/local/lib/python2.6 /usr/bin/install -c -m 644 ./Lib/asynchat.py /usr/local/lib/python2.6 [...] running build_scripts running install_lib creating /Users/rob/Library/Python creating /Users/rob/Library/Python/2.6 creating /Users/rob/Library/Python/2.6/site-packages copying build/lib.macosx-10.4-x86_64-2.6/_AE.so - /Users/rob/Library/ Python/2.6/site-packages copying build/lib.macosx-10.4-x86_64-2.6/_AH.so - /Users/rob/Library/ Python/2.6/site-packages copying build/lib.macosx-10.4-x86_64-2.6/_App.so - /Users/rob/Library/ Python/2.6/site-packages [...] Later, this causes imports that require those .so files to fail. For example... RobsMac Python-2.6.5 $ python Python 2.6.5 (r265:79063, Apr 28 2010, 13:40:18) [GCC 4.2.1 (Apple Inc. build 5646) (dot 1)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import zlib Traceback (most recent call last):     File "", line 1, in ImportError: No module named zlib Any ideas what is wrong? thanks, Rob

    Read the article

  • How to reproduce System.Security.Cryptography.SHA1Managed result in Python

    - by joetyson
    Here's the deal: I'm moving a .NET website to Python. I have a database with passwords hashed using the System.Security.Cryptography.SHA1Managed utility. I'm creating the hash in .NET with the following code: string hashedPassword = Cryptographer.CreateHash("MYHasher", userInfo.Password); The MYHasher block looks like this: <add algorithmType="System.Security.Cryptography.SHA1Managed, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=blahblahblah" saltEnabled="true" type="Microsoft.Practices.EnterpriseLibrary.Security.Cryptography.HashAlgorithmProvider, Microsoft.Practices.EnterpriseLibrary.Security.Cryptography, Version=3.0.0.0, Culture=neutral, PublicKeyToken=daahblahdahdah" name="MYHasher" /> So for a given password, I get back and store in the database a 48 byte salted sha1. I assume the last 8 bytes are the salt. I have tried to reproduce the hashing process in python by doing a sha1(salt + password) and sha1(password + salt) but I'm having no luck. My question to you: How are the public keys being used? How is the password rehashed using the salt. How is the salt created? (e.g., When I say saltEnabled="true", what extra magic happens?) I need specific details that don't just reference other .NET libraries, I'm looking for the actual operational logic that happens in the blackbox. Thanks!

    Read the article

  • Auth problem on Facebook using Ruby/sinatra/frankie/facebooker

    - by user84584
    Hello guys, I'm using sinatra/frankie/facebooker to prototype something simple to test the facebook api, i'm using mmangino-facebooker the more recent version from github and I cloned the most recent version of frankie. I'm using sinatra 0.9.6. My main code is as simple as possible: before do ensure_application_is_installed_by_facebook_user @user = session[:facebook_session].user @photos = session[:facebook_session].get_photos(nil,@user.uid,nil) end get "/" do erb :index end get "/:uid/:image" do |uid,image| @photo_selected = session[:facebook_session].get_photos([image.to_i],nil,nil) erb :selected end The index page just renders a link to the other one (identified by regex "/:uid/:image") however I always get an error when it's trying to render the one identified by regex "/:uid/:image" Facebooker::Session::MissingOrInvalidParameter: Invalid parameter /Library/Ruby/Gems/1.8/gems/mmangino-facebooker-1.0.50/lib/facebooker/parser.rb:610:in `process' /Library/Ruby/Gems/1.8/gems/mmangino-facebooker-1.0.50/lib/facebooker/parser.rb:30:in `parse' /Library/Ruby/Gems/1.8/gems/mmangino-facebooker-1.0.50/lib/facebooker/service.rb:67:in `post' /Library/Ruby/Gems/1.8/gems/mmangino-facebooker-1.0.50/lib/facebooker/session.rb:600:in `post_without_logging' /Library/Ruby/Gems/1.8/gems/mmangino-facebooker-1.0.50/lib/facebooker/session.rb:611:in `post' /Library/Ruby/Gems/1.8/gems/mmangino-facebooker-1.0.50/lib/facebooker/logging.rb:20:in `log_fb_api' /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/benchmark.rb:308:in `realtime' /Library/Ruby/Gems/1.8/gems/mmangino-facebooker-1.0.50/lib/facebooker/logging.rb:20:in `log_fb_api' /Library/Ruby/Gems/1.8/gems/mmangino-facebooker-1.0.50/lib/facebooker/session.rb:610:in `post' /Library/Ruby/Gems/1.8/gems/mmangino-facebooker-1.0.50/lib/facebooker/session.rb:198:in `secure!' ./config/frankie/lib/frankie.rb:66:in `secure_with_token!' ./config/frankie/lib/frankie.rb:44:in `set_facebook_session' ./config/frankie/lib/frankie.rb:164:in `ensure_authenticated_to_facebook' ./config/frankie/lib/frankie.rb:169:in `ensure_application_is_installed_by_facebook_user' I've no idea why, it seems to be related with the auth token I guess.. I logged the request made o the fb rest server: {:sig="4f244d1f510498f4efaae3c03d036a85", :generate_session_secret="0", :method="facebook.auth.getSession", :auth_token="9dae0d02c19c680b574c78d202b0582a", :api_key="70c14732815ace0ae71a561ea5eb38b7", :v="1.0"} {:call_id="1269003766.05665", :sig="194469457d1424dc8ba0678979692363", :method="facebook.photos.get", :subj_id=750401957, :session_key="2.lXL0z3s4_r573xzQwAiA9A__.3600.1269010800-750401957", :api_key="70c14732815ace0ae71a561ea5eb38b7", :v="1.0"} {:sig="4f244d1f510498f4efaae3c03d036a85", :generate_session_secret="0", :method="facebook.auth.getSession", :auth_token="9dae0d02c19c680b574c78d202b0582a", :api_key="70c14732815ace0ae71a561ea5eb38b7", :v="1.0"} The last one gives the error, it could be related with auth_token having the same value in the 1st and on the 3rd ? Cheers and tks, Ze Maria

    Read the article

  • Django | django-socialregistration error

    - by MMRUser
    I'm trying to add the facebook connect feature to my site, I decided to use django socialregistration.All are setup including pyfacebook, here is my source code. settings.py MIDDLEWARE_CLASSES = ( 'django.middleware.common.CommonMiddleware', 'django.contrib.sessions.middleware.SessionMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'facebook.djangofb.FacebookMiddleware', 'socialregistration.middleware.FacebookMiddleware', ) urls.py (r'^callback/$', 'fbproject.fbapp.views.callback'), views.py def callback(request): return render_to_response('canvas.fbml') Template <html> <body> {% load facebook_tags %} {% facebook_button %} {% facebook_js %} </body> </html> but when I point to the URL, I'm getting this error Traceback (most recent call last): File "C:\Python26\lib\site-packages\django\core\servers\basehttp.py", line 279, in run self.result = application(self.environ, self.start_response) File "C:\Python26\lib\site-packages\django\core\servers\basehttp.py", line 651, in __call__ return self.application(environ, start_response) File "C:\Python26\lib\site-packages\django\core\handlers\wsgi.py", line 241, in __call__ response = self.get_response(request) File "C:\Python26\lib\site-packages\django\core\handlers\base.py", line 73, in get_response response = middleware_method(request) File "build\bdist.win32\egg\socialregistration\middleware.py", line 13, in process_request request.facebook.check_session(request) File "C:\Python26\lib\site-packages\facebook\__init__.py", line 1293, in check_session self.session_key_expires = int(params['expires']) ValueError: invalid literal for int() with base 10: 'None' Django 1.1.1 *Python 2.6.2*

    Read the article

  • Rails App hangs after few requests

    - by Paddy
    I have Bitnami Rails stack installed on my Mac. To better explain my problem i created a simple scaffold based rails app with mysql as the backend. I can get to perform simple POST and GET requests for a while and after a few requests the app just hangs indefinitely. No exception caught or anything worthwhile in the development log to report this strange behavior. This is the last bit from the development log before the app froze: Processing WritedatasController#index (for 127.0.0.1 at 2010-03-30 20:38:51) [GET] [4;36;1mWritedata Load (0.7ms) [0m [0;1mSELECT * FROM `writedatas` [0m Rendering template within layouts/application Rendering writedatas/index [4;35;1mWritedata Columns (2.9ms) [0m [0mSHOW FIELDS FROM `writedatas` [0m Completed in 99ms (View: 88, DB: 4) | 200 OK [http://localhost/writedatas] [4;36;1mSQL (0.2ms) [0m [0;1mSET NAMES 'utf8' [0m [4;35;1mSQL (0.1ms) [0m [0mSET SQL_AUTO_IS_NULL=0 [0m Processing WritedatasController#new (for 127.0.0.1 at 2010-03-30 20:38:52) [GET] [4;36;1mWritedata Columns (2.0ms) [0m [0;1mSHOW FIELDS FROM `writedatas` [0m Rendering template within layouts/application Rendering writedatas/new Rendered writedatas/_form (5.9ms) Completed in 34ms (View: 25, DB: 2) | 200 OK [http://localhost/writedatas/new] [4;36;1mSQL (0.4ms) [0m [0;1mSET NAMES 'utf8' [0m [4;35;1mSQL (0.1ms) [0m [0mSET SQL_AUTO_IS_NULL=0 [0m Processing WritedatasController#index (for 127.0.0.1 at 2010-03-30 20:39:17) [GET] [4;36;1mWritedata Load (0.7ms) [0m [0;1mSELECT * FROM `writedatas` [0m Rendering template within layouts/application Rendering writedatas/index [4;35;1mWritedata Columns (2.6ms) [0m [0mSHOW FIELDS FROM `writedatas` [0m Completed in 101ms (View: 90, DB: 4) | 200 OK [http://localhost/writedatas] It just hung at this point. And after this happens i have to restart the server, for it to hang again after few requests. This is the weirdest problem i have faced and i am truly stumped.

    Read the article

< Previous Page | 668 669 670 671 672 673 674 675 676 677 678 679  | Next Page >