Search Results

Search found 22167 results on 887 pages for 'message listener'.

Page 672/887 | < Previous Page | 668 669 670 671 672 673 674 675 676 677 678 679  | Next Page >

  • Pragmas and exceptions

    - by Darryl Gove
    The compiler pragmas: #pragma no_side_effect(routinename) #pragma does_not_write_global_data(routinename) #pragma does_not_read_global_data(routinename) are used to tell the compiler more about the routine being called, and enable it to do a better job of optimising around the routine. If a routine does not read global data, then global data does not need to be stored to memory before the call to the routine. If the routine does not write global data, then global data does not need to be reloaded after the call. The no side effect directive indicates that the routine does no I/O, does not read or write global data, and the result only depends on the input. However, these pragmas should not be used on routines that throw exceptions. The following example indicates the problem: #include <iostream extern "C" { int exceptional(int); #pragma no_side_effect(exceptional) } int exceptional(int a) { if (a==7) { throw 7; } else { return a+1; } } int a; int c=0; class myclass { public: int routine(); }; int myclass::routine() { for(a=0; a<1000; a++) { c=exceptional(c); } return 0; } int main() { myclass f; try { f.routine(); } catch(...) { std::cout << "Something happened" << a << c << std::endl; } } The routine "exceptional" is declared as having no side effects, however it can throw an exception. The no side effects directive enables the compiler to avoid storing global data back to memory, and retrieving it after the function call, so the loop containing the call to exceptional is quite tight: $ CC -O -S test.cpp ... .L77000061: /* 0x0014 38 */ call exceptional ! params = %o0 ! Result = %o0 /* 0x0018 36 */ add %i1,1,%i1 /* 0x001c */ cmp %i1,999 /* 0x0020 */ ble,pt %icc,.L77000061 /* 0x0024 */ nop However, when the program is run the result is incorrect: $ CC -O t.cpp $ ./a.out Something happend00 If the code had worked correctly, the output would have been "Something happened77" - the exception occurs on the seventh iteration. Yet, the current code produces a message that uses the original values for the variables 'a' and 'c'. The problem is that the exception handler reads global data, and due to the no side effects directive the compiler has not updated the global data before the function call. So these pragmas should not be used on routines that have the potential to throw exceptions.

    Read the article

  • Can't install alternate CD from USB?

    - by mattias
    Hi im trying to install ubuntu 12.04 with full hard disk encryption. After downloading and installing the Ubuntu live CD, I learned that truecrypt doesnt support full disk encryption on linux. I also learned that the best way to get "nearly full disk encryption" on ubuntu is by installing it from the alternate install CD. I tried that, but something is wrong with my CD reader/burner so it doesnt boot up when i insert the cd. My thought here was to take the .iso that I downloaded on my unencrypted Ubuntu system, use Unetbootin to make the usb drive. The usb drive used for this is exactly the same brand as one that I know has worked with a previous ubuntu live system on the same computer. I also used unetbootin for that usb, but I created it from windows that time. The usb stick boots up fine and i get through the first couple of steps in the installation process. However, After a while I get a "box" with the following error message "Load Installer components from CD" There was a problem reading data from the CD-ROM. Please make sure it is in the drive. If retrying does not work, you should check the integrity of your CD-ROM. "Failed to copy file from CD-ROM. Retry? " Then I cant get any further. I googled a lot and found this page which seems to tackle this very problem: http://www.dotkam.com/2010/11/29/ins...mage-from-usb/ I tried to do what it said. After pressing TAB, I wrote : cdrom-detect/try-usb=true without quotes because that's what i think is right. When I press TAB, there already is a text saying : /ubnkern initrd=/ubninit vga=788 -- quiet which can be removed. I have tried to both delete the text before the "--" and just inserting cdrom-detect/try-usb=true before it. Any idea of what can be wrong? I would like to do a full system encryption, or as full as it is possible. I dont want to just encrypt my /home folder. Maybe this isn't the easiest way. I use SanDisk usb sticks. I know there is a problem with U3 launcher on some SanDisks, but I never had to remove U3 before from similar disks, and the alternate install does boot up, so I dont think using U3 removal would help me. Any help or indication to an easier way to do this would be appreciated

    Read the article

  • 2D Animation Smoothness - Delta time vs. Kinematics

    - by viperld002
    I'm animating a sprite in 2D with key frames of rotation and xy-positions. I've recently had a discussion with someone saying that when the device (happens to be an iPad using cocos2D) hits a performance bump due to whatever else the user may be doing, lag will arise and that the best way to fight it is to not use actual positions, but velocities, accelerations and torques with kinematics. His message is to evaluate the positions and rotations from these speeds at the current point in time. I've never experienced a situation where I've heard of using kinematics to stem lag in 2D animations and am not sure of how effective it could be. Also, it seems to be overkill. The application is not networked so it's all running on a local device. The desired effect is that the animation always plays as closely as it can to the target frame rate. Wouldn't the technique suffer the same problems as just using the time since the last frame or a fixed time step since the kinematics would also require some time value to perform the calculation? What techniques could you suggest to best achieve the desired effect? EDIT 1 Thank you for your responses, they are very illuminating. I want to clarify my question before choosing an answer however, to make sure that this post really serves it's purpose. I have a sprite of a ball, and a text file with 3 arrays worth of information (rotation,translations x, translations y) with each unit of information existing as a key frame to be stepped through (0 to 49 and back to 0 to replay it again). I have this playing by interpolating from the current key frame to the next, every n-units of time. The animation is visibly correct when compared to a video I was given of it, and it is smooth because of the interpolations between the key frames. This is the existing state of the project. There are no physics simulated, only a static animation of a ball moving in a way an artist specifically designed. Should I, instead of rotation in degrees and translations by positions in space, derive velocities, accelerations and torques to express this static animation as a function of time? As in, position now = foo(time now), where foo uses kinematics.

    Read the article

  • Fail to start windows after Ubuntu 11.10 install

    - by user49995
    Computer: HP Pavilion dv7-6140eo OS: Originally Win7 I recently decided to try out Ubuntu, and I decided to dual-boot it with Windows 7. First I googled some how-to's, then I downloaded Ubuntu onto a memory stick and made a second partition (I originally only had one partition that I shrunk and used the unallocated space to install onto during the Ubuntu install). During the install I set format type to xt4 (or something, it was the default option), chose the "in the beginning" option and set the last option as "\". The install was successful. Although, when I restarted my computer I weren't able to choose which operating system to start; it went right into windows. After showing the windows logo for half a second before rebooting, I get a blue screen (see bottom of the page). Trying to fix it, I deleted the newly made partition I had just installed Ubuntu onto (seeing it wasn't working either). This made no difference. I proceeded with installing Ubuntu again, so I would at least have a functioning computer, and now Ubuntu works fine (on it now). The only difference on start-up is that I get a Grub window asking me to between several options including Linux and Windows 7 (loader). Now, if I choose Windows 7, I get the message "Windows was unable to start. A recent software or hardware change might be the cause". It recommends me to choose the first option of the two it provides; to start start-up repair tool. The second option being starting windows normally. If I start windows normally, the same thing happens as earlier. My computer does not have a windows installation CD. Although, it has (at least it used to, if I haven't screwed that too up) a 17gb recovery partition. In addition I made an image of the computer onto a external hard drive when I first got it. Though, I have no idea how to use either. If anyone has any idea how I can make windows work again or reinstall it (already backed up my files) it would be greatly appreciated. I still prefer to dual boot between the two functioning operating systems, but I will settle for a functioning windows 7. Thanks a lot for any replies. Blue screen: A problem has been detected and Windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check for viruses on your computer. Remove and newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configures and terminated. Run CMKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: **STOP: 0x0000007B (0xFFFFF880009A97E8,0xFFFFFFFFC0000034, 0x0000000000000000,0x0000000000000000

    Read the article

  • System freezes while not in use, how do I fix this?

    - by PHLAK
    Bare with me, the following is a bit winded. I have Ubuntu 10.10 Desktop 64-bit installed on my laptop and up until a few weeks ago it has been running great. Then one day, while I was not using the laptop it froze. I was logged in as my user but had locked the screen locked and closed the lid. I didn't notice that it had frozen until I opened the lid and wiggled the mouse to try and log in. The screen remained black and I got no response. I immediately tried Alt + F2, F3, F4, etc. but got no response. The only thing I could do was hold the power button to power off the machine. The freezing has happened as quickly as within 10-20 minutes of the system being logged off and lid closed and as long as 4-6 hours. My machine is NOT configured to go into standby when plugged in and this has happened both on AC power and battery. Troubleshooting I have performed: I uninstalled programs I knew that I had installed between when it was working fine and having problems. Those programs were CrashPlan, Shutter and Conky. After uninstalling ALL of these programs the freezing still occurs. Next, I decided to SSH into the machine from my desktop and leave an htop and tail of the syslog running. Here are screenshots of the last thing shown on both when the system froze: htop, syslog Here is a dump of my syslog after another freeze. The freeze happened at 9:14 and I didn't notice it until about 10 minutes later and rebooted, hence the 10 minute gap from 9:14 to 9:24. In the above syslog dump I noticed a lot of NVRM: os_raise_smp_barrier(), invalid context! and upon investigating that message learned it was from the proprietary Nvidia driver I had installed. Thinking this could be part of the problem I uninstalled the Nvidia driver and reverted to using the Nouveau driver. The computer still froze after a few hours. Lastly, thinking the problem could be caused by overheating I used compressed air to blow out any dust in the CPU vents and all other openings on the laptop. None of the above troubleshooting has helped and the freezing still occurs. What other steps can I take to troubleshoot and/or fix this problem? Note: Yesterday X started to eat up a lot of CPU power and eventually froze my system while I was forwarding an X session over SSH (from another PC to my laptop). I'm unsure if this is related or not as it doesn't match any of the symptoms of the problem above. Aside from this, the system has never frozen while in use, even under heavy load. EDIT: I just ran Memtest86+ and it made it through two passes without any errors. Just eliminating possible causes here.

    Read the article

  • Nvidia GT218 repository drivers don't work

    - by user1042840
    I upgraded all packages with sudo apt-get upgrade command on my Ubuntu 10.04 box and I have Ubuntu 12.04 3.2.0-29-generic-pae now. I have two monitors and the following GPU: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 300] (rev a2) After upgrading to 12.04, I somehow lost my previous setup with one common workspace stretched across two monitors. When Ubuntu starts only one monitor is on. I can see the message on the active monitor: Not optimum mode. Recommended mode: 1680x1050 60Hz I used Nvidia proprietary drivers on 10.04 but now jockey-text --list shows: xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, Disabled, Not in use) xorg:nvidia_current_updates - NVIDIA accelerated graphics driver (post-release updates) (Proprietary, Enabled, Not in use) When I run sudo nvidia-settings it says You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.' I typed nvidia-xconfig and rebooted, but jockey-text --list says the same after the reboot: Not in use. The same with nvidia-current - Enabled but Not in use. I also tried nvidia-173 but I ended up in tty immediately at startup so I removed it. I used to have some problems with Nvidia proprietary drivers on 10.04, I had to put paths to EDID files in /etc/X11/xorg.conf explicitly, but the resolution was as recommended and both monitors were working. If I understand correctly, nouveau drivers are used now by default because the resolution is still quite high, definitely not 800x600, xrandr showed: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 66.0* 1280x1024 76.0 1024x768 76.0 800x600 73.0 640x480 73.0 640x400 0.0 320x400 0.0 1680x1050_60.00 (0x4f) 146.2MHz h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz However, colors seem a bit faded and blurry with nouveau drivers. Mouse cursor is invisible if it's placed inside Firefox window, and only one monitor is working. I like open source and if it's possible I'd prefer to use nouveau drivers but a few things should be fixed. I'm curious why nvidia-current drivers from the repository don't work now. I read it has something to do with the new X11 server in Ubuntu 12.04, is it true? How can I get it back to work?

    Read the article

  • OOF checklist

    - by Daniel Moth
    When going on vacation or otherwise being out of office (known as OOF in Microsoft), it is polite and professional that our absence creates the minimum disruption possible to the rest of the business, and especially our colleagues. Below is my OOF checklist - I try to do these as soon as I know I'll be OOF, rather than leave it for the night before. Let the relevant folks on the team know the planned dates of absence and check if anybody was expecting something from you during that timeframe. Reset expectations with them, and as applicable try to find another owner for individual activities that cannot wait. Go through your calendar for the OOF period and decline every meeting occurrence so the owner of the meeting knows that you won't be attending (similar to my post about responding to invites). If it is your meeting cancel it so that people don’t turn up without the meeting organizer being there. Do this even for meetings were the folks should know due to step #1. Over-communicating is a good thing here and keeps calendars all around up to date. Enter your OOF dates in whatever tool your company uses. Typically that is the notification to your manager. In your Outlook calendar, create a local Appointment (don't invite anyone) for the date range (All day event) setting the "Show As" dropdown to "Out of Office". This way, people won’t try to schedule meetings with you on that day. If you use Lync, set the status to "Off Work" for that period. If you won't be responding to email (which when on your vacation you definitely shouldn't) then in Outlook setup "Automatic Replies (Out of Office)" for that period. This way people won’t think you are rude when not replying to their emails. In your OOF message point to an alias (ideally of many people) as a fallback for urgent queries. If you want to proactively notify individuals of your OOFage then schedule and send a multi-day meeting request for the entire period. Remember to set the "Show As" to "Free" (so their calendar doesn’t show busy/oof to others), set the "Reminder" to "None" (so they don’t get a reminder about it), set "Low Importance", and uncheck both "Response Options" so if they don't want this on their calendar, it is just one click for them to get rid of it. Aside: I have another post with advice on sending invites. If you care about people who would not observe the above but could drop by your office, stick a physical OOF note at your office door or chair/monitor or desk. Have I missed any? Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • SQL SERVER – Fix: Error: 147 An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference

    - by pinaldave
    Everybody was beginner once and I always like to get involved in the questions from beginners. There is a big difference between the question from beginner and question from advanced user. I have noticed that if an advanced user gets an error, they usually need just a small hint to resolve the problem. However, when a beginner gets error he sometimes sits on the error for a long time as he/she has no idea about how to solve the problem as well have no idea regarding what is the capability of the product. I recently received a very novice level question. When I received the problem I quickly see how the user was stuck. When I replied him with the solution, he wrote a long email explaining how he was not able to solve the problem. He thanked multiple times in the email. This whole thing inspired me to write this quick blog post. I have modified the user’s question to match the code with AdventureWorks as well simplified so it contains the core content which I wanted to discuss. Problem Statement: Find all the details of SalesOrderHeaders for the latest ShipDate. He comes up with following T-SQL Query: SELECT * FROM [Sales].[SalesOrderHeader] WHERE ShipDate = MAX(ShipDate) GO When he executed above script it gave him following error: Msg 147, Level 15, State 1, Line 3 An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference. He was not able to resolve this problem, even though the solution was given in the query description itself. Due to lack of experience he came up with another version of above query based on the error message. SELECT * FROM [Sales].[SalesOrderHeader] HAVING ShipDate = MAX(ShipDate) GO When he ran above query it produced another error. Msg 8121, Level 16, State 1, Line 3 Column ‘Sales.SalesOrderHeader.ShipDate’ is invalid in the HAVING clause because it is not contained in either an aggregate function or the GROUP BY clause. What he wanted actually was the SalesOrderHeader all the Sales shipped on the last day. Based on the problem statement what the right solution is as following, which does not generate error. SELECT * FROM [Sales].[SalesOrderHeader] WHERE ShipDate = (SELECT MAX(ShipDate) FROM [Sales].[SalesOrderHeader]) Well, that’s it! Very simple. With SQL Server there are always multiple solution to a single problem. Is there any other solution available to the problem stated? Please share in the comment. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Criteria for selecting timeout value?

    - by stijn
    Situation: a piece of software reads frames of data from a file in a seperate thread and puts it on a queue, emptied by another thread. That second thread periodically checks on the queue and fails rather gracefully, by showing an error message stating the read timed out, if no data is available within a certain amount of time. Initially this timeout was set to 200mSec. There was no real reasoning behind that constant though, but it worked fine. We measured on a couple of machines and for large data frames, larger than what would be used by customers, a read took like 20mSec whith no other load on the machine. However one customer now gets timeout errors now and then (on the second try all is fine, probably the file is in cache or the virus scanner leaves it alone). The programmers are like 'well, yeah, but that customer's machine is full of cruft, virus scanners, tons of unneeded background processes etc'. Of course the customer is like 'hey this should just work, shouldn't it'? While the programers have a point, since the software is heavy enough to validate the need for a dedicated machine, that does not make the customer happy. Increasing the timeout to 2 seconds, for example, solves the problem. But I'd like to make a proper decision now instead of just randomly pick some magic constant that is probably ok in 99% of cases. What criteria should be used for that? We could just pick a large number, but that feels wrong. (and then we end up with a program that has the horrible bahaviour of hanging when trying to read from a disconnected drive for instance, whereas we'd rather make it show an error right away). Or we could make the timeout value a user setting, but then we need to ducument it clearly and even then not all customers are tech savy enough to really understand what it does. Or we could try and wait until another customer reports timeouts and increase the value again. And again. Until we find something ok for 99.99% of the cases.. Any good practice for this type of situation?

    Read the article

  • 1000baseT/Full Supported and Advertised but not working!

    - by user11973
    Hello, i'm using a AT3IONT-I motherboard with integrated card. If I ethtool it to 1000 full duplex it wont work! Here is sudo ethtool eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) Link detected: yes here is sudo lshw -C network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: 03 serial: bc:ae:c5:8b:7d:33 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.021.00-NAPI duplex=full ip=192.168.0.2 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:42 ioport:e800(size=256) memory:f8fff000-f8ffffff memory:f8ff8000-f8ffbfff memory:fbff0000-fbffffff And lspci -nn: 00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1) 00:00.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a88] (rev b1) 00:03.0 ISA bridge [0601]: nVidia Corporation MCP79 LPC Bridge [10de:0aad] (rev b3) 00:03.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0aa4] (rev b1) 00:03.2 SMBus [0c05]: nVidia Corporation MCP79 SMBus [10de:0aa2] (rev b1) 00:03.3 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a89] (rev b1) 00:03.5 Co-processor [0b40]: nVidia Corporation MCP79 Co-processor [10de:0aa3] (rev b1) 00:04.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) 00:04.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) 00:06.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1) 00:06.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1) 00:08.0 Audio device [0403]: nVidia Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1) 00:09.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) 00:0b.0 RAID bus controller [0104]: nVidia Corporation MCP79 RAID Controller [10de:0abc] (rev b1) 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac4] (rev b1) 00:10.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) 00:15.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac6] (rev b1) 03:00.0 VGA compatible controller [0300]: nVidia Corporation ION VGA [10de:087d] (rev b1) 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) If i use Code: sudo ethtool -s eth0 speed 1000 duplex full autoneg off then in ethtool speed is Unknown and it doesn't work; if I set it via pre-up it wont work either... Please help!! Thanks!

    Read the article

  • NHibernate Session Load vs Get when using Table per Hierarchy. Always use ISession.Get&lt;T&gt; for TPH to work.

    - by Rohit Gupta
    Originally posted on: http://geekswithblogs.net/rgupta/archive/2014/06/01/nhibernate-session-load-vs-get-when-using-table-per-hierarchy.aspxNHibernate ISession has two methods on it : Load and Get. Load allows the entity to be loaded lazily, meaning the actual call to the database is made only when properties on the entity being loaded is first accessed. Additionally, if the entity has already been loaded into NHibernate Cache, then the entity is loaded directly from the cache instead of querying the underlying database. ISession.Get<T> instead makes the call to the database, every time it is invoked. With this background, it is obvious that we would prefer ISession.Load<T> over ISession.Get<T> most of the times for performance reasons to avoid making the expensive call to the database. let us consider the impact of using ISession.Load<T> when we are using the Table per Hierarchy implementation of NHibernate. Thus we have base class/ table Animal, there is a derived class named Snake with the Discriminator column being Type which in this case is “Snake”. If we load This Snake entity using the Repository for Animal, we would have a entity loaded, as shown below: public T GetByKey(object key, bool lazy = false) { if (lazy) return CurrentSession.Load<T>(key); return CurrentSession.Get<T>(key); } var tRepo = new NHibernateReadWriteRepository<TPHAnimal>(); var animal = tRepo.GetByKey(new Guid("602DAB56-D1BD-4ECC-B4BB-1C14BF87F47B"), true); var snake = animal as Snake; snake is null As you can see that the animal entity retrieved from the database cannot be cast to Snake even though the entity is actually a snake. The reason being ISession.Load prevents the entity to be cast to Snake and will throw the following exception: System.InvalidCastException :  Message=Unable to cast object of type 'TPHAnimalProxy' to type 'NHibernateChecker.Model.Snake'. Thus we can see that if we lazy load the entity using ISession.Load<TPHAnimal> then we get a TPHAnimalProxy and not a snake. =============================================================== However if do not lazy load the same cast works perfectly fine, this is since we are loading the entity from database and the entity being loaded is not a proxy. Thus the following code does not throw any exceptions, infact the snake variable is not null: var tRepo = new NHibernateReadWriteRepository<TPHAnimal>(); var animal = tRepo.GetByKey(new Guid("602DAB56-D1BD-4ECC-B4BB-1C14BF87F47B"), false); var snake = animal as Snake; if (snake == null) { var snake22 = (Snake) animal; }

    Read the article

  • Now Shipping! NetAdvantage for .NET 2010 Volume 3!

    The new NetAdvantage Ultimate includes all four Line of Business user interface control sets for ASP .NET, Windows Forms, WPF and Silverlight plus two advanced Data Visualization UI control sets for WPF and Silverlight. With six NetAdvantage products in one robust package, Infragistics® gives you hundreds of controls and infinite development possibilities. Unified XAML Product Strategy-Share Code, Get More Controls In the 10.3 release, Infragistics continues to deliver code parity between the XAML platforms, WPF and Silverlight. In the line of business toolsets, Infragistics introduces the new xamSchedule™, full-featured, Outlook® 2010-style schedule controls, and the new xamDataTree™, a data bound tree view that comfortably handles tens of thousands of tree nodes. Mimicking our Silverlight Drag and Drop Framework, the WPF Drag and Drop Framework CTP empowers you to add your own rich touches to your applications. Track Users' Behaviors New to all NetAdvantage Silverlight controls is the Infragistics Analytics Framework (IGAF), which empowers you to track user behavior in RIAs running on Silverlight 4. Building on the Microsoft® Silverlight Analytics Framework, with IGAF you can analyze the user's behaviors to ensure the experience you want to deliver. NetAdvantage for Windows Forms--New Office® 2010 Ribbon and Application Menu 2010 Create new experiences with Windows Forms. Now with Office 2010 styling, NetAdvantage for Windows Forms has new features such as Microsoft® Office 2010 ribbon and enhanced Infragistics.Excel to export the contents of the high performance WinGrid™ into Microsoft Excel® 2010. The new Windows Message Support enables Infragistics standalone editor controls to process numerous Windows® OS messages, allowing them to respond just like native controls to changes in the Windows environment. Create Faster Web 2.0 Experiences with NetAdvantage for ASP .NET Infragistics continues to push the envelope to deliver the fastest ASP .NET WebForms controls available on the market. Our lightning fast ASP .NET grids are now enhanced with XPS/PDF Exporting and Summary Rows. This release also includes support for jQuery Templating (as a CTP) within our WebDataGrid™ and WebDataTree™ controls allowing you to quickly cut down overall page size. Deliver Business Intelligence with Power, Flexibility and the Office 2010 Experience NetAdvantage for WPF Data Visualization and NetAdvantage for Silverlight Data Visualization help you deliver flexible, powerful and usable end user experiences in Business Intelligence applications. Both suites include the Pivot Grid that delivers the full power of online analytical processing (OLAP) to present multi-dimensional data, sliced and diced in cross-tabulated form for end users to drill down into, interact with and easily extract meaning from the data. Mapping Made Easy 10.3 marks the official release of the WPF Data Visualization xamMap™ control to map anything and everything from geographic to geo-spacial mapping data. Map layers allow you to add successive levels of detail, navigational panes for panning in all directions, color swatch panes that facilitate value scales like Choropleth shading, and scale panes allowing users to zoom-in and out. Both toolsets introduce the first of many relationship maps! With the xamOrgChart™ CTP you can map out organizational charts of up to 50K employees, competitive brackets (think World Cup) and any other relational, organizational map your application needs. http://www.infragistics.com span.fullpost {display:none;}

    Read the article

  • Ubuntu 10.10 not recognizing external hard drive

    - by sr71
    Installed Ubuntu 10.10 on a hard drive by itself (no windows). All updates are up to date. Everything`works fine except when I plug in a 320 gig Toshiba external hard drive....it is not recognized. When I plug in an 8 gig flash drive it is recognized no problem. What do I mean by "not recognized"? I mean: how do you know it was not recognized. You can check the command "cat /proc/partitions" in a terminal with and without the hdd attached. If you see some difference, it's ok. If the difference is something like "sda1" (sd+letter+number) then you have partition on it, maybe it can't be handled in Ubuntu (no filesystem on it or so). If there is only "sda" in the difference for example (sd+letter, but no number after it) then the drive itself is detected, just no partition is created on it. Also you can check out the messages of the kernel, with the "dmesg" command in the terminal. If there is no disk/partition/anything in /proc/partitions, there can be an USB level problem, you can issue command "lsusb" as it was suggested before my answer. It's really matter of what do you mean about "not recognized". @Marco Ceppi @Oli @Pitto By "not recognized" I meant that when I plug in a 8 gig flash drive an icon immediately appears on the desktop imdicating that there is a flash drive plugged in and I can click on it and view the files on the flash drive. It also shows up on the "Nautilus" default file manager. When I plug in the 320 gig Toshiba external hard drive, I get no indication on the desktop or the file manager (thus "not recogized"). When I run the command "cat/proc/partitions/" I get an error message Could not open location 'file:///home/bob/cat/proc/partitions' with or without the external hard drive installed. With the "dmeg" command I get about 10 pages of info with no mention of disk/partition/anything in /proc/partitions. When I run "lsub" command I get the following: bob@bob-desktop:~$ lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 04b3:3003 IBM Corp. Rapid Access III Keyboard Bus 003 Device 002: ID 04b3:3004 IBM Corp. Media Access Pro Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub bob@bob-desktop:~$

    Read the article

  • JavaOne Latin America 2011: Keynotes, Sessions, Hands-on Lab, Geek Bike Ride, etc.

    - by arungupta
    After a very successful JavaOne San Francisco, the first JavaOne on the road for 2011 is heading to Latin America next week. There are 59 sessions delivered by several rock star speakers and with 60% sessions delivered by the local community. There are strategy, technical and community keynotes. The community keynote on Thursday will particularly be lot of fun with appearances from Java Champions, JUG leaders, jHome, and several others. Also check out the Exhibitor Floor Plan and don't forget to Register! The complete session schedule gives an overview for the list of technical sessions and hands-on lab. There are several Java EE, GlassFish, and WebLogic sessions and are highlighted below: Tuesday, Dec 6 Oracle WebLogic Server XML-Free Programming: Java Server and Client Development without <> Java EE Application in Production: Tips and Tricks to achieve zero downtime Web Applications and Wicket Scala on GlassFish and Java EE 6 REST and Java best practices, issues and solutions for the Enterprise Building a RESTful Web Application with JAX-RS and Ext JS 4 Wednesday, Dec 7 Oracle GlassFish Server in the Virtual World JAX-RS 2.0: What's in JSR 339 ? JSF 343: What's coming in Java Message Service 2.0 ? The Great News of JSF 2.0! Thursday, Dec 8 Servlet 3.1 Update Develop, Deploy, and Monitor a Java EE 6 Application with Clustered GlassFish 3.1 Migrating from EJB/SOAP to REST with JAX-RS: The Case of the Central Bank of Brazil GlassFish REST Administration Back End: An Insider look at a real REST Application Scripting and Agile Java EE Applications with Jython And this is Brazil so a fun element is important. There are the usual Caiprihinas, Churrascaria, late night social dinners, community engagement, and multiple other fun activities. Fabiane Nardon and SOUJava gang are also organizing a Geek Bike Ride on the Sunday (Dec 4th) before JavaOne. The 20k ride (map) starts at 7am and goes through the streets of Sao Paulo. This is an opportunity to meet some of the JavaOne speakers and attendees outside the conference. They've even designed a t-shirt and 32 geeks have signed up so far. I'm glad my discussion with Fabiane during FISL early this year for arranging this bike ride is finally taking shape! I'm definitely looking forward to it and will be bringing nice fruity Odwalla bars for all the riders. Be there to ride with me and many others :-) Stay updated by following @oracledobrasil and @javaoneconf. I'll be there, will you ? Don't wait and register now! And in case you are interested in reading about the experience from last year ... it was lot of fun! Just check out a collage of pictures yourself ... And the complete album at:

    Read the article

  • WIF, ADFS 2 and WCF&ndash;Part 1: Overview

    - by Your DisplayName here!
    A lot has been written already about passive federation and integration of WIF and ADFS 2 into web apps. The whole active/WS-Trust feature area is much less documented or covered in articles and blogs. Over the next few posts I will try to compile all relevant information about the above topics – but let’s start with an overview. ADFS 2 has a number of endpoints under the /services/trust base address that implement the WS-Trust protocol. They are grouped by the WS-Trust version they support (/13 and /2005), the client credential type (/windows*, /username*, /certificate*) and the security mode (*transport, *mixed and message). You can see the endpoints in the MMC console under the Service/Endpoints page. So in other words, you use one of these endpoints (which exactly depends on your configuration / system setup) to request tokens from ADFS 2. The bindings behind the endpoints are more or less standard WCF bindings, but with SecureConversation (establishSecurityContext) disabled. That means that whenever you need to programmatically talk to these endpoints – you can (easily) create client bindings that are compatible. Another option is to use the special bindings that come with WIF (in the Microsoft.IdentityModel.Protocols.WSTrust.Bindings namespace). They are already pre-configured to be compatible with the ADFS endpoints. The downside of these bindings is, that you can’t use them in configuration. That’s definitely a feature request of mine for the next version of WIF. The next important piece of information is the so called Federation Service Identifier. This is the value that you (at least by default) have to use as a realm/appliesTo whenever you are requesting a token for ADFS (e.g. in  IdP –> RSTS scenario). Or (even more) technically speaking, ADFS 2 checks for this value in the audience URI restriction in SAML tokens. You can get to this value by clicking the “Edit Federation Service Properties” in the MMC when the Service tree-node is selected. OK – I will come back to this basic information in the following posts. Basically I want to go through the following scenarios: ADFS in the IdP role ADFS in the R-STS role (with a chained claims provider) Using the WCF bindings for automatic token issuance Using WSTrustChannelFactory for manual token handling Stay tuned…

    Read the article

  • How to Add a Taskbar to the Desktop in Ubuntu 14.04

    - by Lori Kaufman
    If you’ve switched to Ubuntu from Windows, it may take some time to get used to the new and different interface. However, you can easily incorporate a familiar Windows feature, the Taskbar, into Ubuntu to make the transition easier. A tool called Tint2 provides a bar at the bottom of the Ubuntu Desktop that resembles the Windows Taskbar. We will show you how to install it and make it start every time you log into Ubuntu. NOTE: When we say to type something in this article and there are quotes around the text, DO NOT type the quotes, unless we specify otherwise. Press Ctrl + Alt + T to open a Terminal window. To install Tint2, type the following line at the prompt and press Enter. sudo apt-get install tint2 Type your password at the prompt and press Enter. The progress of the installation displays and then a message displays saying how much disk space will be used. When asked if you want to continue, type a “y” and press Enter. When the installation has finished, close the Terminal window by typing “exit” at the prompt and pressing Enter. Click the Search button at the top of the Unity bar. Start typing “startup applications” in the Search box. Items that match what you type start displaying below the Search box. When the Startup Applications tool displays, click the icon to open it. On the Startup Applications Preferences window, click Add. On the Add Startup Program dialog box, enter a name for the startup application. This name displays in the list on the Startup Applications Preferences window. Type “tint2” in the Command edit box, enter a description in the Comment edit box, if desired, and click Add. Tint2 is added as a startup program and will start every time you log into Ubuntu. Click Close to close the Startup Applications Preferences window. Log out and log back in to make the Taskbar available on the desktop. You do not need to reboot the computer for this change to take effect. Now, when you minimize a program, an icon for it displays on the Taskbar at the bottom of the screen, just like the Taskbar in Windows. If you decide that you don’t want the Taskbar to display every time you log into Ubuntu, you can uncheck the Tint2 startup program on the Startup Applications Preferences window. You don’t need to delete it from the list.

    Read the article

  • Small hiccup with VMware Player after upgrading to Ubuntu 12.04

    The upgrade process Finally, it was time to upgrade to a new LTS version of Ubuntu - 12.04 aka Precise Pangolin. I scheduled the weekend for this task and despite the nickname of Mauritius (Cyber Island) it took roughly 6 hours to download nearly 2.400 packages. No problem in general, as I have spare machines to work on, and it was weekend anyway. All went very smooth and only a few packages required manual attention due to local modifications in the configuration. With the new kernel 3.2.0-24 it was necessary to reboot the system and compared to the last upgrade, I got my graphical login as expected. Compilation of VMware Player 4.x fails A quick test on the installed applications, Firefox, Thunderbird, Chromium, Skype, CrossOver, etc. reveils that everything is fine in general. Firing up VMware Player displays the known kernel mod dialog that requires to compile the modules for the newly booted kernel. Usually, this isn't a big issue but this time I was confronted with the situation that vmnet didn't compile as expected ("Failed to compile module vmnet"). Luckily, this issue is already well-known, even though with "Failed to compile module vmmon" as general reason but nevertheless it was very easy and quick to find the solution to this problem. In VMware Communities there are several forum threads related to this topic and VMware provides the necessary patch file for Workstation 8.0.2 and Player 4.0.2. In case that you are still on Workstation 7.x or Player 3.x there is another patch file available. After download extract the file like so: tar -xzvf vmware802fixlinux320.tar.gz and run the patch script as super-user: sudo ./patch-modules_3.2.0.sh This will alter the existing installation and source files of VMware Player on your machine. As last step, which isn't described in many other resources, you have to restart the vmware service, or for the heart-fainted, just reboot your system: sudo service vmware restart This will load the newly created kernel modules into your userspace, and after that VMware Player will start as usual. Summary Upgrading any derivate of Ubuntu, in my case Xubuntu, is quick and easy done but it might hold some surprises from time to time. Nonetheless, it is absolutely worthy to go for it. Currently, this patch for VMware is the only obstacle I had to face so far and my system feels and looks better than before. Happy upgrade! Resources I used the following links based on Google search results: http://communities.vmware.com/message/1902218#1902218http://weltall.heliohost.org/wordpress/2012/01/26/vmware-workstation-8-0-2-player-4-0-2-fix-for-linux-kernel-3-2-and-3-3/ Update on VMware Player 4.0.3 Please continue to read on my follow-up article in case that you upgraded either VMware Workstation 8.0.3 or VMware Player 4.0.3.

    Read the article

  • Them and us

    - by Plip
    As much as we try and create inclusive societies throughout the globe time and time again we revert to our tribal and clan origins back in the distant past, be those line split across the obvious like  Nationality, Religion or even the Football teams we follow. Microsoft to me has always been a “them”. I was always on the outside looking in, free to say as I wished and have an external objective viewpoint. Now, after my first week (well four days but who’s counting) Microsoft is an “us” for me. So when I look up in the Atrium of Building 1 at Microsoft’s UK headquarters I see banners like the one above and I already genuinely feel a part of this much bigger community. I looked up at that and I felt a sense of pride to be part of something bigger, something which is out there touching peoples lives everywhere (for the good and the bad). My objectivity has made me who I am today. I’m open to other ideas and concepts, I’ve worked hard to be understanding across the board be it from technology through to cultural differences in my life and it’s vital to me that I preserve that so I now have to learn how I balance the “them” of Microsoft to the “us” of Microsoft and maintain the objectivity. It’s my job to advise people on the best way to do things, which won’t always mean “Use Microsoft Technology X”, sometimes it’ll be my responsibility to say “Don’t use Microsoft Technology X”. My first and foremost responsibility is to the customer, to give them the best advice that I can and I want to maintain that. Yeah, I’m sure I’ll be tarred by some as a Microsoft guy, for many years I’ve had just that, but those out there in the non Microsoft communities I’ve engaged in I think know that I’m the first to say when I think something is a bit naff. So, here’s my ask to you ‘the community’. Keep me honest. If I start to sound like a fanboi I want you to find me and give me a slap. It’s all too easy to forget reality sometimes and I want to make sure I stay well and truly routed in that reality. Also, no matter how much I embed myself within Microsoft I fear I will never understand Microsoft’s marketing team. In the Gents just under the WP7 banner shown above I was faced with this. Draw your own conclusions on what it’s message is.

    Read the article

  • Unity works on my PC but not on the Server. What did I miss?

    - by Erik France
    I have a web service using Microsoft Unity to hook the pieces together.  It all works fine on my PC but when I put it on the web server, I receive this error message: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: The value of the property 'type' cannot be parsed. The error is: Method 'GetClaimsForUser' in type 'WebService.Implementation.ClaimsRetriever' from assembly 'WebService.Implementation, Version=1.0.0.0, Culture=neutral, PublicKeyToken=62cac0f1a908971a' does not have an implementation. If I look at the web.config, I see the following: <unity>     <typeAliases>       <typeAlias alias="ITokenGenerator" type="WebService.Interfaces.ITokenGenerator, WebService.Interfaces" />       <typeAlias alias="TokenGenerator" type="WebService.Implementation.TokenGenerator, WebService.Implementation" />       <typeAlias alias="IClaimsRetriever" type="WebService.Interfaces.IClaimsRetriever, WebService.Interfaces" />       <typeAlias alias="ClaimsRetriever" type="WebService.Implementation.ClaimsRetriever, WebService.Implementation" />       <typeAlias alias="TokenGeneratorSettings" type="WebService.Implementation.TokenGeneratorSettings, WebService.Implementation" />       <typeAlias alias="String" type="System.String, mscorlib" />     </typeAliases>     <containers>       <container>         <types>           <type type="ITokenGenerator" mapTo="TokenGenerator">             <typeConfig extensionType="Microsoft.Practices.Unity.Configuration.TypeInjectionElement, Microsoft.Practices.Unity.Configuration">               <constructor>                 <param name="retriever" parameterType="IClaimsRetriever">                   <dependency />                 </param>                 <param name="settings" parameterType="TokenGeneratorSettings">                   <dependency />                 </param>               </constructor>             </typeConfig>           </type>           <type type="IClaimsRetriever" mapTo="ClaimsRetriever">             <typeConfig extensionType="Microsoft.Practices.Unity.Configuration.TypeInjectionElement, Microsoft.Practices.Unity.Configuration">               <constructor>                 <param name="connectionStringName" parameterType="String">                   <value value="devDatabase" type="String" />                 </param>               </constructor>             </typeConfig>           </type>         </types>       </container>     </containers>   </unity> I have another web service, using an almost identical config running on the web server.  But this new web service will not run. Any ideas on what I have not told Unity to do?  Or maybe what I told Unity to do incorrectly?

    Read the article

  • External hard drive issue

    - by Blind Fish
    I am running Ubuntu 12.04 and I have a 500GB external hard drive, formatted in ext4, which I have used for about a year to store batches of data that I am sifting through. About once a week I move a chunk of data from the external drive to my internal drive for processing. As I do that I delete the data from the external drive and empty the trash, thereby clearing up space on the external and also preventing myself from grabbing stuff that I've already sorted through. The vast majority of this is text files, but there are a few .jpegs and .mp4s thrown in, if that matters. Anyway, this has been working without a hitch for nearly a year. So today I plug in the drive and I have an odd issue. I was able to move folders from the external over to my internal drive with no problem, but when I tried to delete those files I was unable to do so. I kept getting the "unable to send file to trash, do you wish to delete permanently?" message. I clicked yes / delete all, but no files were actually deleted. It just sat there. Even worse, while the system was trying in vain to delete those files I was unable to move more files over. In short, I was stuck. I canceled the operation, unmounted and remounted the drive, and then I had an even bigger problem. I have a spreadsheet of all the different folders on there ( exactly 818 ) and yet when I opened the drive in Nautilus, it was only finding 512 folders. So I had 306 missing folders, but my free space was unchanged. Immediately I think that the drive may be corrupted. I went into Disk Utility and ran the check disk option. It said that the drive was NOT clean, but offered no remedy or option to repair. I went back into the drive in Nautilus and once again attempted to delete the files I had already moved. Same issue. I clicked on Details and it said that it was unable to create a trashing file I/O error. I've looked, and it's not a permissions issue. The drive and all folders that are in it all belong to me, and they are all read / write. I've started running badblocks on the drive, but it looks like that is going to take several hours to complete. Any ideas?

    Read the article

  • Once installed geos library (C++, and C), and then trying to install rgeos package (R), it reports geos-config missing!

    - by user1873888
    Knowing that the package rgeos, from the R language, requieres a prior installation of geos libraries, I installed, both, libgeos and libgeos-c1 (3.2.2), using the synaptic installer in my Ubuntu 12.04 (32 bit) machine. Then I tried to install rgeos directly from the R console, and it issued a message in the sense that geos-config was not found. The output is as follows: > install.packages("rgeos") Installing package(s) into ‘/home/checo/R/i486-pc-linux-gnu-library/2.15’ (as ‘lib’ is unspecified) also installing the dependency ‘sp’ probando la URL 'http://cran.rstudio.com/src/contrib/sp_1.0-9.tar.gz' Content type 'application/x-gzip' length 882102 bytes (861 Kb) URL abierta ================================================== downloaded 861 Kb probando la URL 'http://cran.rstudio.com/src/contrib/rgeos_0.2-19.tar.gz' Content type 'application/x-gzip' length 221471 bytes (216 Kb) URL abierta ================================================== downloaded 216 Kb * installing *source* package ‘sp’ ... ** package ‘sp’ successfully unpacked and MD5 sums checked ** libs gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c R centroid.c -o Rcentroid.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c gcdist.c -o gcdist.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c init.c -o init.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c pip.c -o pip.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c pip2.c -o pip2.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c sp_xports.c -o sp_xports.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c surfaceArea.c -o surfaceArea.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c zerodist.c -o zerodist.o gcc -std=gnu99 -shared -o sp.so Rcentroid.o gcdist.o init.o pip.o pip2.o sp_xports.o surfaceArea.o zerodist.o -L/usr/lib/R/lib -lR installing to /home/checo/R/i486-pc-linux-gnu-library/2.15/sp/libs ** R ** data ** demo ** inst ** preparing package for lazy loading ** help *** installing help indices ** building package indices ** installing vignettes ‘intro_sp.Rnw’ ‘over.Rnw’ ** testing if installed package can be loaded * DONE (sp) * installing *source* package ‘rgeos’ ... ** package ‘rgeos’ successfully unpacked and MD5 sums checked configure: CC: gcc -std=gnu99 configure: CXX: g++ configure: rgeos: 0.2-17 checking for /usr/bin/svnversion... no configure: svn revision: 394 checking geos-config usability... ./configure: line 1385: geos-config: command not found no configure: error: geos-config not usable ERROR: configuration failed for package ‘rgeos’ * removing ‘/home/checo/R/i486-pc-linux-gnu-library/2.15/rgeos’ Warning in install.packages : installation of package ‘rgeos’ had non-zero exit status Forgive my ignorance, but I don't know where this file, "geos-config", comes from: should it be generated by the gcc compilations above, or should it be previously installed when the libgeos libraries were intalled? I learnt, from another machine, that "geos-config" is an executable and that it should be installed in /usr/bin. Do you have any idea on what's wrong with my procedure? Thanks, -Sergio.

    Read the article

  • How to deal with MySQL Connector/ODBC error "Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'"

    - by user12653020
    I am sure many users run into a mysterious problem when perfectly working ODBC configurations started failing with errors like: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' The above error message might be preceded with something like [nxDc[yQ]. At the same time odbc.ini specifies in its DSN different SOCKET=/tmp/mysql.sock or a TCP connection SERVER=<remote_host_or_ip>. The question is, what had happened that the ODBC driver started to ignore the DSN options? The clue lies in the corrupted string [nxDc[yQ], which actually was [UnixODBC][MySQL] with each 2nd symbol removed. This is the case of bad conversion from SQLCHAR to SQLWCHAR. The UnixODBC driver manager took a single-byte character string from the client application and tried to convert it into the wide (multi-byte) characters for the Unicode version of MyODBC driver: Initially the piece of the connection string was represented by 1-byte chars like: [S][E][R][V][E][R][=][m][y][h][o][s][t][;] after the bad conversion to wide chars (commonly 2-byte UTF-16) [SE][RV][ER][=m][yh][os][t;] instead of [S\0][E\0][R\0][V\0][E\0][R\0][=\0][m\0][y\0][h\0][o\0][s\0][t\0][;\0] Naturally, the MyODBC driver could not parse the bad string and tried to use the default connection type (SOCKET) with the default value (/var/lib/mysql/mysql.sock) Now we know what happened, but why it happened? In most cases it happened because of using ODBCManageDataSourcesQ4 utility or its older analog ODBCConfig. When registering ODBC drivers they put lots of additional options and one of these options badly affects the UnixODBC driver manager itself. The solution is simple - remove or comment out the option in odbcinst.ini file (it is empty by default) set for the driver: [MySQL ODBC 5.2.6 Driver] Description    = Driver         = /home/dbs/myodbc526/lib/libmyodbc5w.so Driver64       = /home/dbs/myodbc526/lib/libmyodbc5w.so Setup          = /home/dbs/myodbc526/lib/libmyodbc5S.so Setup64        = /home/dbs/myodbc526/lib/libmyodbc5S.so UsageCount     = 1 CPTimeout      = 0 CPTimeToLive   = 0 IconvEncoding  =  # <--------- remove this line Trace          = TraceFile      = TraceLibrary   = After applying this simple solution (remove the line with IconvEncoding = ) everything came to normal. Prior to removing that line I tried putting different encoding names there, but the result was not good, so I really don't know how to properly use it. Unfortunately, UnixODBC manuals say nothing about it. Therefore, removing this option was the only way to get things done.

    Read the article

  • Running Built-In Test Simulator with SOA Suite Healthcare 11g in PS4 and PS5

    - by Shub Lahiri, A-Team
    Background SOA Suite for Healthcare Integration pack comes with a pre-installed simulator that can be used as an external endpoint to generate inbound and outbound HL7 traffic on specified MLLP ports. This is a command-line utility that can be very handy when trying to build a complete end-to-end demo within a standalone, closed environment. The ant-based utility accepts the name of a configuration file as the command-line input argument. The format of this configuration file has changed between PS4 and PS5. In PS4, the configuration file was XML based and in PS5, it is name-value property based. The rest of this note highlights these differences and provides samples that can be used to run the first scenario from the product samples set. PS4 - Configuration File The sample configuration file for PS4 is shown below. The configuration file contains information about the following items: Directory for incoming and outgoing files for the host running SOA Suite Healthcare Polling Interval for the directory External Endpoint Logical Names External Endpoint Server Host Name and Ports Message throughput to be simulated for generating outbound messages Documents to be handled by different endpoints A copy of this file can be downloaded from here. PS5 - Configuration File The corresponding sample configuration file for PS5 is shown below. The configuration file contains similar information about the sample scenario but is not in XML format. It has name-value pairs specified in the form of a properties file. This sample file can be downloaded from here. Simulator Configuration Before running the simulator, the environment has to be set by defining the proper ANT_HOME and JAVA_HOME. The following extract is taken from a working sample shell script to set the environment: Also, as a part of setting the environment, template jndi.properties and logging.properties can be generated by using the following ant command: ant -f ant-b2bsimulator-util.xml b2bsimulator-prop Sample jndi.properties and logging.properties are shown below and can be modified, as needed. The jndi.properties contains information about connectivity to the local Weblogic Managed Server instance and the logging.properties file controls the amount of logging that can be generated from the running simulator process. Simulator Usage - Start and Stop The command syntax to launch the simulator via ant is the same in PS4 and PS5. Only the appropriate configuration file has to be supplied as the command-line argument, for example: ant -f ant-b2bsimulator-util.xml b2bsimulatorstart -Dargs="simulator1.hl7-config.xml" This will start the simulator and will keep running to provide an active external endpoint for SOA Healthcare Integration engine. To stop the simulator, a similar ant command can be used, for example: ant -f ant-b2bsimulator-util.xml b2bsimulatorstop

    Read the article

  • How to deal with malicious domain redirections?

    - by user359650
    It is possible for anybody to buy a domain name containing negative terms and point it to someone's website in order to damage their reputation. For instance someone could buy the domain child-pornography.com and point it to the address 64.34.119.12 which is the address behind stackoverflow.com and people navigating to the domain in question would end up visualizing content from StackExchange which would be detrimental to StackExchange's image. To illustrate this, I added the entry 64.34.119.12 child-pornography.com to my /etc/hosts file and tested. Here is what I obtained: I personally found this user experience terrible as someone could think that Stack Exchange are in favor of child pornography and awaiting support from the community to create a Q&A site about it. I tested with other websites and experienced other behaviors that I would categorize as follows: 1 - Useful 404 page (happens with stackoverflow.com): For me the worst way of handling this as the image of the targeted website is directly associated with the offending domain. The more useful the 404 page, the bigger the impression that the targeted website would be willing to help with child pornography. 2 - Redirection (happens with microsoft.com): For instance when accessing child-pornography.com you get redirected to www.microsoft.com. It isn't as bad as above as the offending domain name never appears alongside the targeted website's content, but still bad in my opinion as it gives the impression the targeted website bought the offending domain and redirected it to their website to get more traffic. 3 - Server error (happens with lemonde.fr): You get an error from the webserver which page doesn't contain any content that can be associated with the targeted website (e.g. default Apache 404 page, completely blank page). I believe that is good as the identify of the targeted website isn't revealed. Above are the various behaviors I experienced, but I also thought about a fourth way of dealing with this which is described below. 4 - Disclaimer page (haven't found any website implementing that technique): Display a message such as : "You ended here because someone bought and linked the child-pornography.com domain to our website. We do not own this domain and do not associate ourselves with it. This request has been logged by our servers and we will raise this issue with the competent authorities to have this domain taken down. If you want to access our website, please click here." The good thing about this method is that it can be implemented at application layer (good if you don't have control over web server which happens with some hosting solutions), allows you to protect yourself from any liability, and offer the visitor to be redirected to your own website. Which of the above options would you implement to deal with malicious domain linking (IMO only options 3 and 4 are worth considering) ?

    Read the article

  • Functional vs. Non-Functional Requirements vs Design ideas in an SRS

    - by Nicholas Chow
    For a school project, I had to create a SRS for a "fictional" application. However they did not show us what it exactly entails, and were very vague with explanations. The SRS asked of us has to have at least 5 functional requirements, 5 non functional requirements and 1 constraint. Now I have tried my best to make one however I there are still some uncertainties left, I hope you experts can tell me whether or not I am thinking in the right direction. I will keep on updating this posts as I have questions regarding requirements that are vague to me, thank you all in advance for making SRS more clear for me FR1 Registration of Organizer FR1 describes the registration of an Organizer on CrowdFundum FR1.1 The system shall display a registration form on the website. FR1.2 The system shall require a Name, Username, Document number passport/ID card, Address, Zip code, City, Email address, Telephone number, Bank account, Captcha code on the registration form when a user registers. FR1.3 The system shall check whether the Name, Username, Document number passport/ID card, Address, Zip code, City, Email address, Telephone number, Bank account, Captcha code are filled out correctly within 1 seconds after a user submits the registration form. FR1.4 The system shall display an error message containing: “Registration could not be completed” to the subscriber within 1 seconds after the system check of the registration form was unsuccessful. FR1.5 The system shall send a verification email containing a verification link to the subscriber within 30 seconds after the system check of the registration form was successful. FR1.6 The system shall add the newly registered Organizer to the user base within 5 seconds after the verification link was accessed. Questions: FR1.1 Is this a functional requirement, or have I incorporated design idea in it by using "shall display on website". If so what would be a better way to write it? FR1.2 Is this better written in one requirement, or should I write each condition as a seperate requirement? FR1.3-1.5 Are these functional requirements or did I mix some non functional elements in it? How is it better phrased? FR1.3-1.6 Are these all correct functional requirements? As in free of ambiguity, complete, implementation free etc.

    Read the article

< Previous Page | 668 669 670 671 672 673 674 675 676 677 678 679  | Next Page >