Search Results

Search found 19009 results on 761 pages for 'network shares'.

Page 672/761 | < Previous Page | 668 669 670 671 672 673 674 675 676 677 678 679  | Next Page >

• Re-installing Windows on an old laptop

  - by Khaled

  I have an old laptop and I want to re-install Windows XP on it. The problem is that this laptop does not have an optical drive. I checked the boot sequence in the BIOS. It does not show an option to boot from USB. It have only two options: Boot from HD. Boot using Realtek agent (network boot). I tried to copy the Windows CD to second drive D:\ and run the installed from there. However, I could not format the C:\ drive. Windows complaints about setup files will be removed or something like that. I tried to boot the laptop using PXE, but I could not. It seems that the DHCP request did not get answered. I thought I could use a USB CD-ROM drive (I don't have one to try), but it might not work as there is no option to boot from USB. Do you think it will work? Do I have other options to try? Any recommendations?

  Read the article

• How do you change a Cisco ASA 5510 management interface?

  - by Sam Sanders

  I want to add a redundant interface to my Cisco ASA 5510. The management interface is currently using Ethernet0/1 (10.1.25.254/24) one of the interface I want to use for the redundant interfaces. So I wanted to setup Management0/0 as the new management interface. The other interface I want to use is Ethernet0/2 (10.1.0.254/24) for the redundant interface. The Ethernet0/3 (10.1.251.5/24) interface is not going to be part of the redundant interface. I gave the Management0/0 an IP address of 10.1.254.5, and was able to connect a win7 box to Management0/0 and use 10.1.254.5 as a gateway; and ping another address on the (10.1.251.0/24) network, but I can't ping the interface (10.1.254.5) itself. I also can't use ASDM/SSH to log onto the ASA at 10.1.254.5. I setup rules in Configuration Device Management Management Access ASDM/HTTPS/Telnet/SSH. That look like the original rules for the Ethernet0/1 interface. The last thing I can think to try would be to change the Configuration Device Management Management Access Management Interface. I'm a bit nervous about changing it, the description of it is a bit vague. What it's going to do if I change it? What is the correct way to change a management interface?

  Read the article

• fedora, dhcpd fails to start

  - by soxs060389

  History: I got a tiny shiny plugserver which I want to plug to my ADSL router (or however you want to call it) on one end (eth0), and the other end (eth1) I want to run a dhcp server for my LAN. ATM I am stuck with getting LAN to work. OS is fedora 12. I configured my /etc/dhcp/dhcpd.conf like this: # # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "unknown.org"; option domain-name-servers 192.168.44.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.44.255; default-lease-time 86400; max-lease-time 172800; subnet 192.168.44.0 netmask 255.255.255.0 { host fedorabigbox { hardware ethernet 00:19:66:8E:61:74; fixed-address 192.168.44.21; } #host mobile #{ # hardware ethernet ***; # fixed-address 192.168.44.22; #} range 192.168.44.100 192.168.44.110; option routers 192.168.44.1; } # this is just dummy, as read many howtos, some suggesting to add a subnet blah netmask blah for each interface subnet 192.168.33.0 netmask 255.255.255.0 { range 192.168.33.100 192.168.33.110; option routers 192.168.33.1; } But the server fails to start when trying to start it via /etc/init.d/dhcpd start In general it would be nice if someone can point me to a in detail explanation of how network works, I am pretty new to this stuff. More concrete question: How to point the subnets to eth1 and the other to eth0, how can this be achieved? Does someone see any errors or flaws? Syntax should be correct, allready checked that with the dhcpd syntax check. Thanks for any help

  Read the article

• All virtualhosts serving Apache default files

  - by tj111

  I'm trying to configure Apache as an in-network webserver, and am using the sites-available/sites-enabled feature as opposed to just static vhost files. I set up a couple VirtualHosts, all with a unique DocumentRoot, however request for all the VirtualHosts just serve up the "It's Working!" default file. I can't for the life of me figure out why it won't serve the content out of the correct directory. Here's the contents of the virtualhost directive files, let me know if I need to post more. default (note that apache renames this to 000-default in sites-enabled, so it's not an ordering issue) NameVirtualHost *:80 ServerName emp <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName emp DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> billmed <VirtualHost *:80> ServerName billmed.emp ServerRoot /home/empression/Projects/billmed/web/httpdocs <Directory "/home/empression/Projects/billmed/web/httpdocs"> Order Allow,Deny Allow from All </Directory> </VirtualHost> Note that I have DNS zones for both emp and billmed.emp, as well as entries in /etc/hosts. My ultimate goal is to set up this machine as an in-house webserver with a custom tld (emp), but progress has been pretty slow.

  Read the article

• Windows 7 Explorer keeps crashing

  - by Daniel Liang

  I currently have an issue with Windows Explorer. It keeps crashing when I browse through a network drive. This is happening on several computers. I have already obtained a crash dump file but it doesn't state much: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\LocalDumps\explorer.exe.3964.dmp] User Mini Dump File with Full Memory: Only application data is available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible Product: WinNt, suite: SingleUserTS Machine Name: Debug session time: Mon Oct 21 11:21:30.000 2013 (UTC - 4:00) System Uptime: 0 days 0:06:20.449 Process Uptime: 0 days 0:05:54.000 ................................................................ ................................................................ .... Loading unloaded module list ............. This dump file has an exception of interest stored in it. The stored exception information can be accessed via .ecxr. (f7c.fe4): Access violation - code c0000005 (first/second chance not available) eax=00000000 ebx=07a3f080 ecx=00000400 edx=00000000 esi=00000002 edi=00000000 eip=76e170f4 esp=07a3f030 ebp=07a3f0cc iopl=0 nv up ei pl zr na pe nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246 ntdll!KiFastSystemCallRet: 76e170f4 c3 ret I've already tried removing certain context menu items. I disabled all unnecessary start-up items. Ran memtest86 and it looks fine on that end. It also happens when I browse through my local disk. Can anyone take a look into this? Thanks!

  Read the article

• ISA 2000 and COD MW2 Steam

  - by twlichty

  OK, so maybe not the "proper use" of network resources, but we enjoy the odd COD game during lunch hours. When we played COD4, we had a dedicated server setup at the back of the server room. With MW2, we need to be able to connect to steam to be able to play multi-player. I've found this support article here: https://support.steampowered.com/kb%5Farticle.php?ref=8571-GLVN-8711 Which outlines all the ports I need to open. I went through and created the following rules in ISA 2000 (I'm stuck with 2000 for now). Protocol Definition: Steam Primary connection: Port 27000, UDP, Send Receive Secondary Connection: Port range 27001-27030 Send Receive Protocol Definition: Steam TCP In Primary connection: 27014, TCP, Inbound Secondary Connection: Port range: 27015-27050, Inbound Protocol Definition: Steam 4380 Primary connection: 4380, UDP, Send Receive When I start steam on my local workstation (I did add an exception to the Vista Firewall to allow steam), the steam client sits on "Updating Steam" for 5 minutes then errors out with: You must connect to the internet first. Any ideas? I assume I missed something. Thanks for your help.

  Read the article

• Error 0x80073cf9 when installing or updating apps from windows store

  - by cmorse

  On my Windows 8 desktop I keep getting error 0x80073cf9 when I try to install or update an app from the windows store. In the installings apps pane it just says "This app wasn't installed -- view details" and when I select that it says "Something happened and this app couldn't be installed. Please try again. Error code: 0x80073cf9" I am using the built-in windows firewall and antivirus. And my laptop is able to install updates when it is on the same network. This is what winstore.log shows when I try to update the maps app: 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] *********************************************************************** 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Process name: C:\Windows\system32\taskhost.exe 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] User name: Desktop\User 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Computer name: desktop 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Windows build: 9200.16424.amd64fre.win8_gdr.120926-1855 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Client version: 615 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011428] CWSTileUpdateHandler::Worker: Broker is handling badge updates. 2012-10-18 15:31:47.554, _Info_ WS [00002572:00008200] CProgressDispatcher::OnProgress: AppId = 97a2179c-38be-45a3-933e-0d2dbf14a142, PFN = Microsoft.BingMaps_8wekyb3d8bbwe, InstallPhase = 1, PhasePercent = 0, TotalPercent = 0 2012-10-18 15:31:47.558, _Warning_ WS [00002572:00008200] CDownloadProgress::IDownloadCompletedCallback::Invoke: Download complete result 0x80073cf9 for Microsoft.BingMaps_8wekyb3d8bbwe 2012-10-18 15:31:47.559, _Error_ WS [00002572:00008200] CActionItem::_DoDownload: Download failed for 97a2179c-38be-45a3-933e-0d2dbf14a142, hr=0x80073cf9 2012-10-18 15:31:47.560, _Info_ WS [00002572:00008200] CActionItem::_DoDownload: Notifying progress handlers of download failure for 97a2179c-38be-45a3-933e-0d2dbf14a142, hr=0x80073cf9 2012-10-18 15:31:47.560, _Error_ WS [00002572:00008200] CProgressDispatcher::OnError: PFN = Microsoft.BingMaps_8wekyb3d8bbwe, InstallPhase = 1, hrError = 0x80073cf9

  Read the article

• Exchange 2003 ActiveSync problem with certificate

  - by colemanm

  We're having problems getting iPhones to sync properly with SBS 2003 Exchange. When you add a new Exchange ActiveSync account on an iPhone and enter all the pertinent information, it shows a "Verifying Exchange account info" message for a minute or so, then says everything's verified and asks what you want to sync, Mail, Contacts, Calendars... so it looks like it's working. However, when you go to the Mail app and select the Exchange email account, it just shows an "Inbox" folder with nothing in it. When you try refreshing, it attempts for a second, then says "Last Updated" with a timestamp, as if it worked, but there's no mail and no error message/feedback at all. I think I've narrowed it down to some sort of certificate issue, but I'm having trouble finding out where to go from here... I ran MS's Exchange connectivity testing tool with these results: Our cert was purchased from Network Solutions, and I'd already added it to the IIS Default Website for OWA purposes. But this report makes it look like the cert is somehow problematic. I don't know what to do now... Here's a shot of the cert details, just in case:

  Read the article

• Host name change breaking http? Fedora

  - by Dave

  OK so I have been messing around on my development server. It has been a while since I have had my head in linux and I suspect I have broken something. I have SSH running and that is working fine. I also have HTTP and I had FTP running also. Earlier today I decided I wanted to rename the machine so I updated the /etc/hosts file and /etc/sysconfig/network. I also changed the server name in the httpd.conf. I rebooted the machine and reconnected to SSH fine. Later I was messing around with the FTP service (trying to tighten up the user security) and when i tried to connect remotely to FTP no joy, it said cannot connect. I thought that was weird but had planned to remove ftp as we will be using github so removed ftp and moved on. Then I tried to connect to the website but major fail. even connecting to the IP address is failing. I used lynx to connect to the localhost and there was my site so something going on at server level. I thought maybe something up with iptables but I have not changed them but tried adding http but still no joy. I have a - Fedora release 17 (Beefy Miracle) NAME=Fedora VERSION="17 (Beefy Miracle)" ID=fedora VERSION_ID=17 PRETTY_NAME="Fedora 17 (Beefy Miracle)" ANSI_COLOR="0;34" CPE_NAME="cpe:/o:fedoraproject:fedora:17" Fedora release 17 (Beefy Miracle) Fedora release 17 (Beefy Miracle) Linux version 3.3.4-5.fc17.x86_64 ([email protected]) (gcc version 4.7.0 20120504 (Red Hat 4.7.0-4) (GCC) ) #1 SMP Mon May 7 17:29:34 UTC 2012 This is my iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination Like I say I can use SSH no issue but http although running is a no go from a remote computer. Any ideas?

  Read the article

• Turning on Bluetooth disables wifi on Yoga 2

  - by Yostage

  I have a Lenovo Yoga 2. The moment that I turn on bluetooth, the wifi drops out - I lose connection, and connecting again shows "connection failed". If I turn the bluetooth off, wifi can reestablish fine. I've tried lots of different combinations of drivers for both the wifi and the bluetooth, but no combination has has changed this behavior yet. I've read some speculation that the cards have insufficient shielding, but that seems like kind of a large flaw to ship with. I've tried with a Carbon X1, a Yoga 2 Pro, and a Yoga 2 all next to each other on the desk while running InSSIDer. The X1 and the Y2P don't lose wifi connection when the bluetooth turns on, but the Y2 does immediately. The Y2P and the Y2 are running the same drivers for bluetooth and wifi, and appear to have the same wireless card internally. During the failure state, InSSIDer still sees signal strength for my network, but I cannot connect to it. stats: the card that comes in the laptop is an Intel Wireless-N 7260 Intel Bluetooth driver is at 17.0.1401.422 Intel Wireless driver is at 17.0.2.5 Windows 8.1 x64 Home wifi is a Medialink MWN-WAPR150N

  Read the article

• Configure Domino to use SMTP routing and hMailServer

  - by Sébastien Lachance

  I have been trying for a couple of days to set up a Domino 8.5 server. Basically, I want everything to be run inside a local network. Right now I can send email to other user in the Domino directory without any mail address. I am pretty new to all this stuff, so maybe the answer will be really obvious. What I need to do is be able to send a mail from somewhere else to a domino user that will be redirected to his account. On the Domino server, I also have hMailServer installed on port 25. I configured Domino to use port 26. I followed those step to get where I am now. -I have set the Fully qualified Internet host name to "preview.notes". -Smtp Listener task changed to Enabled to turn on the Listener so that the server can receive messages routed via SMTP routing -Setting up SMTP routing within the local Internet domain (http://www.h2l.com/help/help85%5Fadmin.nsf/f4b82fbb75e942a6852566ac0037f284/7f9738a49efc4f58852574d500097b01?OpenDocument) -I modified the person to use the [email protected] address. -I'm using the hMailServer (which have the local "preview.local" domain name) to send mail to [email protected]. When sending mail I got an error telling that the DNS is not set up correctly. Is using the Domino Smtp server instead of hMailServer will solve the problem? I can Telnet the Domino Smtp Server.

  Read the article

• Change the Powershell $profile directory

  - by Swoogan

  I would like to know how to change my the location my $profile variable points to. PS H:\> $profile H:\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 H:\ is a network share, so when I create my profile file, and load powershell I get the following: Security Warning Run only scripts that you trust. While scripts from the Internet can be useful, this script can potentially harm your computer. Do you want to run H:\WindowsPowerShell\Microsoft.PowerShell_profile.ps1? [D] Do not run [R] Run once [S] Suspend [?] Help (default is "D"): According to Microsoft, the location of the $profile is determined by the %USERPROFILE% environment variable. This is not true: PS H:\> $env:userprofile C:\Users\username For example, I have an XP machine working how I want: PS H:\> $profile C:\Documents and Settings\username\My Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 PS H:\> $env:userprofile C:\Documents and Settings\username PS H:\> $env:homedrive H: PS H:\> $env:homepath \ Here's the same output from the Vista machine where the $profile points to the wrong place: PS H:\> $profile H:\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 PS H:\> $env:userprofile C:\Users\username PS H:\> $env:homedrive H: PS H:\> $env:homepath \ Since $profile isn't actually determined by %USERPROFILE% how do I change it? Clearly anything that involves changing the homedrive or homepath is not the solution I'm looking for.

  Read the article

• Time-Machine backup over SSH tunnel to NFS mount

  - by BTZ

  I've recently started using a new NAS which runs CentOS 6.2. One of the purposes of the NAS would be to serve as a backup target. Whilst I have been using Apple's Time-Machine for a while and I am very satisfied with it, I'd like to continue using it. Backing up directly to an address in my network is no hassle; all works fine. For security reasons I'd like all my traffic to go through an ssh tunnel to the NAS. This way I can avoid needing to get a VPNserver (for personal reasons). As of NFSv4 the NFS deamon is bound to port 2049, which makes it easy for me to direct all traffic through a ssh tunnel. Tunnel: ssh -f admin@ms -L 2000:localhost:2049 -N Mount: mount -t nfs -o nfsvers=4,rw,proto=tcp,sync,intr,hard,timeo=600,retrans=10,wsize=32768,rsize=32768,port=2000 localhost:/mac_backup /Volumes/backup This works fine for Finder/terminal and throughput is almost equal to direct traffic. (CPU of the NAS does ride high when I reach max bandwidth though) Now the problem: With Time-Machine I can't use the NFS mount point mounted on localhost. TM seems to try to connect to it and then give me a "OSStatus error 65". I also tried using NFSv3 (I correctly forwarded all ports) with no luck. Can anyone shed a light on this and/or give a solution?

  Read the article

• Website Use Monitoring for 3 People

  - by linkedlinked

  I work in an IT startup with 2 partners, and I'm the programmer/IT guy -- in other words, the work horse. To make a long story short, I'm doing most of the work right now, while they spend all day on Facebook. That's OK, because they're paying my salary, but if the project fails, I'm sure they'll blame me for it (I'm doing my best to make sure that doesn't happen!), and I want some sort of recourse. I already have an app that blocks time-wasters on my local PC, and keeps logs of when the app is enabled (so I can say "I had Facebook blocked from 9am-5pm today.") Is there any way I can get a brief summary of the most heavily visited sites, split up by client PC? At the end of the month, I want to be able to say "You both load Facebook, on average, every 10 minutes. You spend hours a day on Youtube, and haven't opened up our bugtracker in weeks" and maybe have a nifty chart or graph to match it. We have a crappy D-Link router, and no IT budget. They are both on Windows Vista, I run Ubuntu Linux. I don't want to install any monitoring software on their PC, but I'm totally fine with, say, routing all the network traffic through my machine. I guess I can think of lots of ways to accomplish this (telnet into JSSH and list open tabs? log all the DNS requests, per-domain? even thinking of setting up a webcam on my desk and just keeping 5-minute snapshots...), I just don't really know where to start. Any advice is appreciated, thanks!

  Read the article

• samba joined to AD canot see users when in the security tab on client

  - by Jonathan

  I've got samba joined via kerberos and winbindd to our AD network and user authentication and everything else is working great. However when I try to add users/groups to file permissions it tells me they are not found. All the users groups show up fine with getent so I'm not sure why they are not showing up. Here is my smb.conf and I would much appreciate any help with this. #GLOBAL PARAMETERS [global] socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=11264 SO_SNDBUF=11264 workgroup = [hidden] realm = [hidden] preferred master = no server string = xerxes web/file server security = ADS encrypt passwords = yes log level = 3 log file = /var/log/samba/%m max log size = 50 printcap name = cups printing = cups winbind enum users = Yes winbind enum groups = Yes winbind use default domain = Yes winbind nested groups = Yes winbind separator = + winbind refresh tickets = yes idmap uid = 1600-20000 idmap gid = 1600-20000 template primary group = "Domain Users" template shell = /bin/bash kerberos method = system keytab nt acl support = yes [homes] comment = Home Direcotries valid users = %S read only = No browseable = No create mask = 0770 directory mask = 0770 force create mode = 0660 force directory mode = 2770 inherit owner = no [test] comment = Test path=/mnt/test writeable=yes valid users = %s create mask = 0770 directory mask = 0770 force create mode = 0660 force directory mode = 2770 inherit owner = no [printers] comment = All Printers path = /var/spool/cups browseable = no printable = yes

  Read the article

• Windows: disable remote access of local drive, even by domain admin

  - by Matt

  We have a network of Windows 7 PCs that are managed as part of a domain. What we want is for the domain admin to be unable to view the PC's local drive (C:) unless he is physically at the PC. In other words, no remote desktop and no ability to use UNC. In other words, the domain admin should not be allowed to put \\user_pc\c$ in Windows Explorer and see all the files on that computer, unless he is physically present at the PC itself. Edit: to clarify some of the questions/comments that have come up. Yes, I am an admin---but a complete Windows novice. And yes, for the sake of this and my similar questions, it is fair to assume that I am working for someone who is paranoid. I understand the arguments about this being a "social problem versus a technical problem", and "you should be able to trust your admins", etc. But this is the situation in which I find myself. I'm basically new to Windows system administration, but am tasked with creating an environment that is secure by the company owner's definition---and this definition is clearly very different from what most people expect. In short, I understand that this is an unusual request. But I'm hoping there is enough expertise in the ServerFault community to point me in the right direction.

  Read the article

• Accessing a shared folder in Windows Server 2008 R2.

  - by Triztian

  Hello all, seems my involvement with computers has grown and I've found my self in the need to access a shared folder on a server. I've read some documentation and managed to set up the folder as a share, for this I created a local group and for now just one local user that has access to the share, the folder is in the public user folder and it's permissions should be (and I believe they are) read/write. The problem is that I can't connect from a remote machine I mean I don't know how the way it should be accessed, the server has a public IP and we use it also as a host to our website I don't know if that affects it though, the folder will be used as the "keeper" for the QuickBooks company files and has the database server manager installed. I've tried setting up a VPN Connection to the but no success. The server has a domain name a "http://www.example.com" that redirects to our website, I am unsure if it could be accessed that way, also the share has a location displayed when I right-click properties Heres what I've tried Setting up a VPN Connection (Windows Vista and 7) Got to the point where I got asked for credential and entered the user I created (which is not an admin) but I got a "Connection fail error 800" I suppose this is because in the domain field I entered the servers workgroup. right-click add network connection (Windows 7) Went through the wizard until I reached the point of entering the location, tried many things, the name in the share's properties(\\SOMETHING\Share), the http://www.example.com , the IP address I'm quite unfamiliar with this, so I have my guesses: Since the group and user are local they do not have access to the folder. The firewall in the server is blocking my connection. Anyways, any help and guidence is truly appreciated.

  Read the article

• Java Deployment and Configuration (1.6.0_21)

  - by user125137

  Sofware: Java Runtime Environment 1.6.0_21 OS: Windows XP Professional 32-Bit, SP3 Situation: a new piece of web based software is being deployed this week and prior to this all the company desktops need to be set up to meet the requirements of this software. One of these requirements is JRE 1.6.0_21. I have successfully scripted the removal of all other Java versions and the installation of the required version, however I cannot get it configured properly. One of the requirements is that the Java console be set to disabled - if it is not it can cause an issue with a particular function. I have pushed out a deployment.config and deployment.properties but the console just will not disable itself.. I know the config is being read correctly because the update tab is being correctly disabled and removed. deployment.config: deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties deployment.system.config.mandatory=true deployment.properties: #deployment.properties #Fri Jun 15 09:34:31 EST 2012 deployment.version=6.0 deployment.console.startup.mode=DISABLE deployment.javaws.autodownload=NEVER deployment.javaws.autodownload.locked= There is no change if I set the console to ENABLE either - it remains on the default of hidden. I'm sure I can disable the console with a registry change of some form but my preference is to have it done via the deployment files as it gives the option of centralising the properties file to a network share if we wish. If anyone has any suggestions it would be appreciated.

  Read the article

• Linux server: Dropped packets

  - by Lars

  I see dropped packets using ifconfig on my eth0 interface: eth0 Link encap:Ethernet HWaddr 00:15:17:0d:03:ca inet addr:10.0.1.2 Bcast:10.0.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 RX packets:30268348 errors:0 dropped:70721 overruns:0 frame:0 TX packets:133076885 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8699434077 (8.6 GB) TX bytes:194937313025 (194.9 GB) Interrupt:16 Memory:feae0000-feb00000 When i use ethtool -S i dont see anything wrong: NIC statistics: rx_packets: 30267138 tx_packets: 133074510 rx_bytes: 8699356158 tx_bytes: 194934147340 rx_broadcast: 35296 tx_broadcast: 5435 rx_multicast: 0 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 0 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 5757001 tx_tcp_seg_failed: 0 rx_flow_control_xon: 8649 rx_flow_control_xoff: 62072 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 8699356158 rx_csum_offload_good: 30212111 rx_csum_offload_errors: 0 rx_header_split: 10857552 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 0 rx_dma_failed: 0 tx_dma_failed: 0 I am running Ubuntu 12.04 with kernel 3.2.0-30-generic #48-Ubuntu SMP I have pinged every device on my internal network for about 24 hours, without packet loss. Also checked my router and my interface to the WAN, also no errors there. Does anyone have any clue?

  Read the article

• In Icinga (Nagios), how do I configure hosts with multiple IPs?

  - by gertvdijk

  I'm setting up Icinga (Nagios fork) and I have some machines with multiple interfaces. Some services are only listening on one of them and to check them correctly, I like to know if it's possible to have multiple IP addresses configured for a single host in Icinga. Here's a minimal example: Remote Server: eth0: 1.2.3.4 (public IP) eth1: 10.1.2.3 (private IP, secure tunnel) Apache listening on 1.2.3.4:80. (public only) OpenSSH listening on 10.1.2.3:22. (internal network only) Postfix SMTP listening on 0.0.0.0:25 (all interfaces) Icinga Server: eth0: 10.2.3.4 (private IP, internet access) Now if I define a host: define host { use generic-host host_name server1 alias server1.gertvandijk.net address 10.1.2.3 } This will not check the HTTP status correctly. And defining an additional host: define host { use generic-host host_name server1-public alias server1.gertvandijk.net address 1.2.3.4 } will check everything, but shows up as two independent hosts. Now I want to 'aggregate' these two hosts to show up as a single host, yet providing an easy configuration to check the services on their proper address. What is the most elegant number-of-configuration-lines-saving solution to this? I read about several plugins available to workaround this, but I can't figure out what is the current way to address it. Solutions go back to 2003, but I'm running Icinga 1.7.1, already capable of the address6 option, yet that triggers IPv6-only resolving on the hostname... Ideally, I wish to configure Icinga to be intelligent enough to know that the Postfix instance running on 10.1.2.3:25 is the same as 1.2.3.4:25 and thus not triggering two alarms. I guess this must have been tackled before and sysadmins have it set up now. Please share your solution to this. Thanks! :)

  Read the article

• How to connect a Win XP PC and Win 7 PC with a Linksys WRT54G Router to a PPPOE connection ?

  - by ChristianM

  I have two PCs and a WRT56G Router. My provider is a PPPOE connection (username and password). I can connect my Windows 7 easily. Even if I choose Auto or PPPOE on the router's configuration. Maybe because this one had the connection in the first place with the username and password set up. But I can't connect the Windows XP PC. Actually it does connect in a way, but it receives and sents just a few packages. I can actually see in My Network Places how many packages does the Gateway make and it's a big difference. And it won't open any page. How should I set up the router so I can give enough bandwith to the Windows XP PC ? I've seen another problem that I forgot to mention. The router can't connect with the pppoe settings. I don't know why, but with Auto DHCP setting and my Windows 7 connected with pppoe settings works. EDIT2: I've installed Win 7 on the other PC so I won't have any problem of compatibility betwen them. But I still can't connect the router with PPPOE settings to the internet. It looks like this: http://img641.imageshack.us/img641/9780/capturefba.png If you need any other screens or info, please tell me.

  Read the article

• How do I restore a Windows Server 2008 R2 bare metal backup to a Windows Server 2012 R2 Hyper-V instance?

  - by Michael J. Gray

  I have been trying to find a simple way to migrate a physical Windows Server 2008 R2 installation over to a virtual machine hosted on Windows Server 2012 R2 Datacenter Edition /w Hyper-V. I came across the bare metal backup feature on Windows Server 2008 R2 and assumed I would be able to easily back it up and simply restore it into a new virtual machine by booting the installation media and getting into the Windows recovery process. When I attempted this, Hyper-V got into a network based restore process, but I do not have a PXE server or anything like that and I would rather not set it up. I tried mounting the VHD produced in the bare metal backup, just to see if it would somehow work, but it of course did not and failed with an error related to an incorrect boot device. I checked the virtual machine's BIOS settings and everything looked fine. I did not expect this to work anyway, so I stopped working through this method any further. Is there a way to take my bare metal backup and restore it into a virtual machine without a PXE server or SCVMM? I am opening to using proprietary tools but since the last time I did this I used Norton Ghost, which is no longer supported, I figured I would try doing it with what is readily available.

  Read the article

• How do you get AWS VPC EC2 instances to be able to see the AWS APIs?

  - by Peter Mounce

  We're spinning up infrastructure inside of an AWS VPC via CloudFormation. We're using auto-scaling groups to bring up VPC-EC2 instances (so, we don't bring up instances directly; ASGs manage that). Inside of a PVC, EC2 instances only have a private IP; they cannot see the outside world without further work. When these instances spin up, we have some bootstrap tasks that require talking to the various AWS APIs. We also have some ongoing tasks that require AWS API traffic. How are you tackling this apparent chicken-egg problem? We've read about: NAT instances - but don't like this so much because it's another layer to our stack. assigning elastic-IPs to each VPC instance that needs to talk - but a) they all do, and b) since we're using ASGs, we don't know which instances to assign EIPs to at provision-time, and c) we'd need to set up something to monitor those ASGs and assign EIPs when instances are terminated and replaced spinning up an instance (actually, a load-balanced pair, probably spanning AZs) to act as an AWS-API proxy for all API traffic I guess I'm wondering whether there's some kind of back-door we can open that allows our VPC EC2 instances access to the AWS API endpoints, but nothing else, for cheap-complexity setup, that doesn't add another network-hop layer to our infrastructure for serving requests.

  Read the article

• IP queue buffer

  - by summerbulb

  I seem to have an issue with IP queue. I have a linux machine that I am using to run some experiments. The linux machine is configured to be a router, having two NICs, connecting two other computers, and managing their network traffic. All incoming packages are captured, using iptables, and analyzed by a C application. The application analyzing the packets has a built-in delay, as part of the experiment. So I have one very fast computer sending packets through my linux-router and a (relatively) slow linux-router that analyses and deals with the packets, one by one. This situation leads to the fact that when I fire up a sender application on one of the computers connected to the linux-router, my IP queue on the linux-router gets filled up (almost) instantaneously. The IP queue's max length is currently set to 1024, and if it overflows, the packets are dropped. This is expected and i'm OK with it. But, (and this is where it gets interesting), every now and then I get the following error: "Failed to receive netlink message: No buffer space available" At start, I thought this was due to the IP queue overflow, but after some analysis i found that sometimes I get the error even if the IP queue buffer did not overflow, and sometime I DON'T get the message even though the buffer DID overflow. When I run > cat /proc/net/ip_queue, I get the following table (also used to monitor the IP queue overflow): Peer PID : 27389 Copy mode : 2 Copy range : 65535 Queue length : 0 Queue max. length : 1024 Queue dropped : 1166875 Netlink dropped : 2916 Looking at the last two values, Queue dropped seems to refer to packets that did not manage to get into the IP queue because the buffer was full. I can see this value rise as I bombard the linux-router. Netlink dropped ( as it's name implies :) ) seems to have to do with the error i'm getting. I did my best to search for material on this error, but wasn't able to find anything that seemed to point me in the required direction. Bottom line: Why am I getting this error and what can I do to avoid it?

  Read the article

• 802.11g -> wired ethernet bridging not working

  - by Malachi

  Usually people want to go the other direction, but I want to take our relatively fast and stable house 802.11g signal and bridge it to ethernet. I have tried using an Airport Express (the b/g flavor) and my i7 MacBook pro, both to no avail. Word is that the b/g flavor of This flavor of Airport Express maxes at firmware 6.3 which doesn't support this kind of bridging properly. However, I expected my MacBook pro to do the job with its "Internet Sharing" feature. Alas, although my wired PC does sort of see it, it doesn't work out. Strangely, using DHCP the PC receives the same IP address as my MBP uses on the network. Less strangely, but still surprisingly, the wired ethernet port on my mac registers as the IP address of the gateway when queried with IFCONFIG. It sort of makes sense that the mac would "pretend" to be the gateway, but the whole thing just isn't working and seems configured wrong - but all the docs I see say basically "OS X Internet Sharing: click it and go". What do I do? Do i really have to buy more hardware, even though I have plenty of would-be candidates for bridging? Incidentally, the host router originating the 802.11g signal is a belkin 802.11g router, and is documented to support WDS.

  Read the article

< Previous Page | 668 669 670 671 672 673 674 675 676 677 678 679  | Next Page >