Search Results

Search found 22587 results on 904 pages for 'google translate'.

Page 673/904 | < Previous Page | 669 670 671 672 673 674 675 676 677 678 679 680  | Next Page >

• ASP.NET MVC WebService - Security for Industrial Android Clients

  - by Chris Nevill

  I'm trying to design a system that will allow a bunch of Android devices to securely log into an ASP.NET MVC REST Web service. At present neither side are implemented. However there is an ASP.NET MVC website which the web service will site along side. This is currently using forms authentication. The idea will be that the Android devices will download data from the web service and then be able to work offline storing data in their own local databases, where users will be able to make updates to that data, and then syncing updates back to the main server where possible. The web service will be using HTTPS to prevent calls being intercepted and reduce the risk of calls being intercepted. The system is an industrial system and will not be in used by the general Android population. Instead only authorized Android devices will be authorized by the Web Service to make calls. As such I was thinking of using the Android devices serial number as a username and then a generated long password which the device will be able to pick up - once the device has been authorized server side. The device will also have user logins - but these will not be to log into the web service - just the device itself - since the device and user must be able to work offline. So usernames and passwords will be downloaded and stored on the devices themselves. My question is... what form of security is best setup on the web service? Should it use forms Authentication? Should the username and password just be passed in with each GET/POST call or should it start a session as I have with the website? The Android side causes more confusion. There seems to be a number of options here Spring-Android, Volley, Retrofit, LoopJ, Robo Spice which seems to use the aforementioned Spring, Retrofit or Google HttpClient. I'm struggling to find a simple example which authenticates with a forms based authentication system. Is this because I'm going about this wrong? Is there another option that would better suite this?

  Read the article

• How to View Netflix Watch Instantly in XBMC

  - by Justin Garrison

  Netflix streaming isn’t just a feature that is nice to have, for many people it is a must have for any video streaming software. Unfortunately it has been missing from XBMC for various reasons, until today. In order to get Netflix Watch Instantly working in XBMC you just need to have XBMC 10.0+ installed on Windows or OS X. Because of a lack of Silverlight support, this currently does not work on XBMC Live, Linux, or iOS devices (iPhone, iPad, AppleTV). You also need to live in a region that offers Netflix streaming (currently US and Canada) Latest Features How-To Geek ETC How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates The Legend of Zelda – 1980s High School Style [Video] Suspended Sentence is a Free Cross-Platform Point and Click Game Build a Batman-Style Hidden Bust Switch Make Your Clock Creates a Custom Clock for your Android Homescreen Download the Anime Angels Theme for Windows 7

  Read the article

• Best way to migrate IIS6 from one server to another

  - by darko-romanov

  Hi, I need to move all my sites on a server with IIS 6 to another one, that has same OS (Windows Server 20003) and same IIS version. I'm trying to understand which is the best way to do it. Searching on Google I've found that there are at least 2 methods, one uses IIS Migration Tool, and another Web Deployment Tool. I don't know which method is best, it also seems that both methods can export one site at once, and I have about 100 sites hosted. What would you do?

  Read the article

• Drawing particles as a smooth blob

  - by Nömmik

  I'm new to game/graphics development and I'm playing around with particles (in 2D). I want to draw particles close to each other as a blob, just as liquid/water. I do not want to draw big circles overlapping as the blob won't be smooth (and too big). I don't really know physics but I assume what I want is something looking similar to surface tension. I haven't been able to find anything on stackexchange or on Google (maybe I do not know the correct keywords?). So far I have found two possible solutions, but I am unable to find any concrete information about algorithms. One of them is to calculate the concave hull of particles I consider being a blob. I can calculate the blob by creating an equivalence class (on the relation "close to each other"). Strangely enough I haven't been able to find any algorithm explaining how to calculate the concave hull. Many posts (and among stackexchange) links to libraries or commercial products that do this (I need libraries to work in C#), but never any algorithm. Also this solution might have a problem with a circle of particles, which would not detect the empty space in the middle. While researching concave hull I stumbled upon something called alpha shapes. Which seems to be exactly what I want to do, however just as with concave hull I haven't found any source explaining how they actually work. I have found some presentation materials but not enough to go on. It's like a big secret everyone knows except me :-/ After calculating the concave hull or alpha shape I want to make it a Bézier curve to make it smooth and nice. Although I do find my approach a bit too complex, maybe I am trying to solve this the wrong way? If you can either suggest any other solution to my problem, or explain the pieces I am missing I would be very happy and grateful :-) Thanks.

  Read the article

• Can I disable email alarms in iCal?

  - by Brock Boland

  I have iCal syncing with a Google Calendar account, and for some reason, some meeting invites that I accept wind up with an email alarm set for 10 minutes before the meeting. This causes iCal to send me an email through Mail.app at the appointed time. This is a pain in the neck, because Mail.app launches if it's not open (and since I use a different client, it never is), and if I'm offline, Mail.app starts throwing up error messages. And besides, I don't want meeting alarms in my inbox. Is there any way to completely disable email alarms in iCal? The only option I see is "Turn off all alarms" - but I don't want to turn off the pop-up windows, just the emails. I remove those alarms any time I come across them, but sometimes they slip through.

  Read the article

• Change the order of DNS lookup when connected in the VPN

  - by qwerty2010

  Hi, Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

  Read the article

• Highly SEO optimised forum posts

  - by Tom Gullen

  Given the following forum post: Basics of how internals of Construct work I've used GameMaker in the past. And I know some C++ and have used a few 3d engines with it. I have also looked at Unity, though I didn't get too much into it. So I know my way around programming etc... My question is, how does construct work internally? I know it allows python scripting, which itself is "technically" interpreted, though python is pretty fast as far as being interpreted goes. But what about the rest? Is the executable that gets cre... The forum software will take the first 150 chars of the first post as the page meta description, and the title will be the thread title. All ok. So in Google it will appear as: Basics of how internals of Construct work I've used GameMaker in the past. And I know some C++ and have used a few 3d engines with it. I have also looked at Unity, though I didn't get too much... http://www.domain.com/forum/basics-of-how-internals-of-construct-work.html Now the problem is (not so much with this thread, but other ones) is the first 150 chars don't always create the best meta description. Is it worth my time to cherry pick threads and manually set their description/title tags so they read like: Internal workings of Construct 2 Events aren't converted to any other language. The runtime is a standalone compiled EXE application, which is optimised and actually very fast. Your events... http://www.domain.com/forum/basics-of-how-internals-of-construct-work.html The H1 on the page is still the original title, but we have overridden the title and description to look more friendly on search results. Is this advantageous forgetting the obvious time cost?

  Read the article

• Gmail Doesn't Like My Cron

  - by Robery Stackhouse

  You might wonder what *nix administration has to do with maker culture. Plenty, if *nix is your automation platform of choice. I am using Ubuntu, Exim, and Ruby as the supporting cast of characters for my reminder service. Being able to send yourself an email with some data or a link at a pre-selected time is a pretty handy thing to be able to do indeed. Works great for jogging my less-than-great memory. http://www.linuxsa.org.au/tips/time.html http://forum.slicehost.com/comments.php?DiscussionID=402&page=1 http://articles.slicehost.com/2007/10/24/creating-a-reverse-dns-record http://forum.slicehost.com/comments.php?DiscussionID=1900 http://www.cyberciti.biz/faq/how-to-test-or-check-reverse-dns/ After going on a huge round the world wild goose chase, I finally was told by someone on the exim-users list that my IP was in a range blocked by Spamhaus PBL. Google said I need an SPF record http://articles.slicehost.com/2008/8/8/email-setting-a-sender-policy-framework-spf-record http://old.openspf.org/wizard.html http://www.kitterman.com/spf/validate.html The version of Exim that I could get from the Ubuntu package manager didn't support DKIM. So I uninstalled Exim and installed Postfix https://help.ubuntu.com/community/UbuntuTime http://www.sendmail.org/dkim/checker

  Read the article

• Seeking .htaccess help: Converting multiple subdomains (both HTTP and HTTPS) to www.domain.com using .htaccess

  - by Joshua Dorkin

  I've been trying to get an answer to this question on other forums (the folks at SuperUser thought this was the place I needed to post) and via my connections, but I haven't gotten very far. Hopefully you guys can help me find an answer. I've got a dozen old subdomains that have been indexed by Google. These have been indexed as both HTTP AND HTTPS. I've managed to redirect all the subdomains properly, provided they are not HTTPS, but can't get any of the HTTPS subdomains to property redirect. Here's the code I'm using: RewriteCond %{HTTP_HOST} ^subdomain1.mysite.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] RewriteCond %{HTTP_HOST} ^subdomain2.mysite.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] RewriteCond %{HTTP_HOST} ^subdomain3.mysite.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] This works great until someone goes to: https://subdomain2.mysite.com$ which is not redirected back to http://www.mysite.com$ How can I get this to work? Additionally, I'm guessing there is an easier way to make it happen than setting up a dozen pairs of RewriteCond/RewriteRule? Is there any way to do this in just a few lines, including one where I list all the subdomains? I'd actually also like to redirect everything on https://www.mysite.com$ to http://www.mysite.com$ except for 3 folders. These are mysite.com/secure, mysite.com/store, mysite.com/user. Is there any good way to add this to the .htaccess file?

  Read the article

• How can I find the shortest path between two subgraphs of a larger graph?

  - by Pops

  I'm working with a weighted, undirected multigraph (loops not permitted; most node connections have multiplicity 1; a few node connections have multiplicity 2). I need to find the shortest path between two subgraphs of this graph that do not overlap with each other. There are no other restrictions on which nodes should be used as start/end points. Edges can be selectively removed from the graph at certain times (as explained in my previous question) so it's possible that for two given subgraphs, there might not be any way to connect them. I'm pretty sure I've heard of an algorithm for this before, but I can't remember what it's called, and my Google searches for strings like "shortest path between subgraphs" haven't helped. Can someone suggest a more efficient way to do this than comparing shortest paths between all nodes in one subgraph with all nodes in the other subgraph? Or at least tell me the name of the algorithm so I can look it up myself? For example, if I have the graph below, the nodes circled in red might be one subgraph and the nodes circled in blue might be another. The edges would all have positive integer weights, although they're not shown in the image. I'd want to find whatever path has the shortest total cost as long as it starts at a red node and ends at a blue node. I believe this means the specific node positions and edge weights cannot be ignored. (This is just an example graph I grabbed off Wikimedia and drew on, not my actual problem.)

  Read the article

• Ethernet switch not working

  - by Froskoy

  I've just tried using two different ethernet switches on my network to replace an 8-port Netgear gigabit ethernet switch, which works fine, but doesn't have enough ports for what I need. Computers are connected to a TP-Link TD-8840T router via a switch. They use DHCP for IP address assignment. One switch is a TigerSwitch 6924M, which I'd expect to be difficult to set up, since it is second hand and has an advanced configuration menu, which I can't access without a serial port. However, the second switch that I tried is a new TP-Link TL-SF024, which doesn't appear to have any configuration options, so that can't be the problem. When I say "not working," I mean that although they display that they are connected to a network, they cannot access the internet. For example commands like "ping -c10 google.co.uk" come up with 100% packet loss. What could be causing the problem and how do I fix it?

  Read the article

• Overlapping appointments in Outlook 2003

  - by iansinke

  I'm using Microsoft Outlook 2003 (Home and Student, if that makes any difference, which I doubt) as my calendar, and I have one minor gripe: it can't really handle appointments that don't begin and end right on the half-hour mark. For instance, if I have a class that ends at 9:22 AM and another class that begins at 9:27 AM, they will appear to overlap in the day view. Not a big deal, but it bugs me nonetheless. Anybody know of a hack or patch that will fix this issue? I've searched the Outlook documentation as well as Google to no avail.

  Read the article

• IIS 7.0 informational HTTP status codes

  - by Samir R. Bhogayta

  1xx - Informational These HTTP status codes indicate a provisional response. The client computer receives one or more 1xx responses before the client computer receives a regular response. IIS 7.0 uses the following informational HTTP status codes: 100 - Continue. 101 - Switching protocols. 2xx - Success These HTTP status codes indicate that the server successfully accepted the request. IIS 7.0 uses the following success HTTP status codes: 200 - OK. The client request has succeeded. 201 - Created. 202 - Accepted. 203 - Nonauthoritative information. 204 - No content. 205 - Reset content. 206 - Partial content. 3xx - Redirection These HTTP status codes indicate that the client browser must take more action to fulfill the request. For example, the client browser may have to request a different page on the server. Or, the client browser may have to repeat the request by using a proxy server. IIS 7.0 uses the following redirection HTTP status codes: 301 - Moved permanently. 302 - Object moved. 304 - Not modified. 307 - Temporary redirect. 4xx - Client error These HTTP status codes indicate that an error occurred and that the client browser appears to be at fault. For example, the client browser may have requested a page that does not exist. Or, the client browser may not have provided valid authentication information. IIS 7.0 uses the following client error HTTP status codes: 400 - Bad request. The request could not be understood by the server due to malformed syntax. The client should not repeat the request without modifications. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 400 error: 400.1 - Invalid Destination Header. 400.2 - Invalid Depth Header. 400.3 - Invalid If Header. 400.4 - Invalid Overwrite Header. 400.5 - Invalid Translate Header. 400.6 - Invalid Request Body. 400.7 - Invalid Content Length. 400.8 - Invalid Timeout. 400.9 - Invalid Lock Token. 401 - Access denied. IIS 7.0 defines several HTTP status codes that indicate a more specific cause of a 401 error. The following specific HTTP status codes are displayed in the client browser but are not displayed in the IIS log: 401.1 - Logon failed. 401.2 - Logon failed due to server configuration. 401.3 - Unauthorized due to ACL on resource. 401.4 - Authorization failed by filter. 401.5 - Authorization failed by ISAPI/CGI application. 403 - Forbidden. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 403 error: 403.1 - Execute access forbidden. 403.2 - Read access forbidden. 403.3 - Write access forbidden. 403.4 - SSL required. 403.5 - SSL 128 required. 403.6 - IP address rejected. 403.7 - Client certificate required. 403.8 - Site access denied. 403.9 - Forbidden: Too many clients are trying to connect to the Web server. 403.10 - Forbidden: Web server is configured to deny Execute access. 403.11 - Forbidden: Password has been changed. 403.12 - Mapper denied access. 403.13 - Client certificate revoked. 403.14 - Directory listing denied. 403.15 - Forbidden: Client access licenses have exceeded limits on the Web server. 403.16 - Client certificate is untrusted or invalid. 403.17 - Client certificate has expired or is not yet valid. 403.18 - Cannot execute requested URL in the current application pool. 403.19 - Cannot execute CGI applications for the client in this application pool. 403.20 - Forbidden: Passport logon failed. 403.21 - Forbidden: Source access denied. 403.22 - Forbidden: Infinite depth is denied. 404 - Not found. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 404 error: 404.0 - Not found. 404.1 - Site Not Found. 404.2 - ISAPI or CGI restriction. 404.3 - MIME type restriction. 404.4 - No handler configured. 404.5 - Denied by request filtering configuration. 404.6 - Verb denied. 404.7 - File extension denied. 404.8 - Hidden namespace. 404.9 - File attribute hidden. 404.10 - Request header too long. 404.11 - Request contains double escape sequence. 404.12 - Request contains high-bit characters. 404.13 - Content length too large. 404.14 - Request URL too long. 404.15 - Query string too long. 404.16 - DAV request sent to the static file handler. 404.17 - Dynamic content mapped to the static file handler via a wildcard MIME mapping. 404.18 - Querystring sequence denied. 404.19 - Denied by filtering rule. 405 - Method Not Allowed. 406 - Client browser does not accept the MIME type of the requested page. 408 - Request timed out. 412 - Precondition failed. 5xx - Server error These HTTP status codes indicate that the server cannot complete the request because the server encounters an error. IIS 7.0 uses the following server error HTTP status codes: 500 - Internal server error. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 500 error: 500.0 - Module or ISAPI error occurred. 500.11 - Application is shutting down on the Web server. 500.12 - Application is busy restarting on the Web server. 500.13 - Web server is too busy. 500.15 - Direct requests for Global.asax are not allowed. 500.19 - Configuration data is invalid. 500.21 - Module not recognized. 500.22 - An ASP.NET httpModules configuration does not apply in Managed Pipeline mode. 500.23 - An ASP.NET httpHandlers configuration does not apply in Managed Pipeline mode. 500.24 - An ASP.NET impersonation configuration does not apply in Managed Pipeline mode. 500.50 - A rewrite error occurred during RQ_BEGIN_REQUEST notification handling. A configuration or inbound rule execution error occurred. Note Here is where the distributed rules configuration is read for both inbound and outbound rules. 500.51 - A rewrite error occurred during GL_PRE_BEGIN_REQUEST notification handling. A global configuration or global rule execution error occurred. Note Here is where the global rules configuration is read. 500.52 - A rewrite error occurred during RQ_SEND_RESPONSE notification handling. An outbound rule execution occurred. 500.53 - A rewrite error occurred during RQ_RELEASE_REQUEST_STATE notification handling. An outbound rule execution error occurred. The rule is configured to be executed before the output user cache gets updated. 500.100 - Internal ASP error. 501 - Header values specify a configuration that is not implemented. 502 - Web server received an invalid response while acting as a gateway or proxy. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 502 error: 502.1 - CGI application timeout. 502.2 - Bad gateway. 503 - Service unavailable. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 503 error: 503.0 - Application pool unavailable. 503.2 - Concurrent request limit exceeded.

  Read the article

• Set defualt open with app to a python program on a Mac

  - by Vincent

  I use the open source application Ulipad http://code.google.com/p/ulipad/ do edit restructured text files (rst). It is a python application that I launch via terminal like so python32 UliPad.py I have python32 as an alias to the 32bit install of python on my machine. I have several versions installed. First I would like a way to launch ulipad like other osx apps. Not really sure how to do this. I would like to set all .rst files to be opened with UliPad.py. Is there a way to do this? I know how to choose the default app in finder but not sure how to choose ulipad as that app.

  Read the article

• Subsumption architecture vs. perceptual control theory

  - by Yasir G.

  I'm a new person to AI field and I have to research and compare 2 different architectures for a thesis I'm writing. Before you scream (homework thread), I've been reading on these 2 topics only to find that I'm confusing myself more.. let me first start with stating briefly what I know so far. Subsumption is based on the fact that targets of a system are different in sophistication, thus that requires them to be added as layers, each layer can suppress (modify) the command of the layers below it, and there are inhibitors to stop signals from execution lets say. PCT stresses on the fact that there are nodes to handle environmental changes (negative feedback), so the inputs coming from an environment go through a comparator node and then an action is generated by that node, HPCT or (Hierarchical PCT) is based on nesting these cycles inside each other so a small cycle to avoid crashing would be nested in a more sophisticated cycle that targets a certain location for example. My questions, am I getting this the right way? am I missing any critical understanding about these 2 models? also any idea where I can find simplified explanations for each theory (so far been struggling trying to understand the papers from Google scholar :< ) /Y

  Read the article

• Data Networks Visualized via Light Paintings [Video]

  - by ETC

  All around you are wireless data networks: cellular networks, Wi-Fi networks, a world of wireless communication. Check out this awesome video of network signals mapped over a cityscape. What would happen if you made a device that allowed you to map signal strength onto film? In the following video electronics tinkerers craft an LED meter and use it to paint onto long exposure photographs with phenomenal results. Immaterials: light painting Wi-Fi [via Make] Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Add a “Textmate Style” Lightweight Text Editor with Dropbox Syncing to Chrome and Iron Is the Forcefield Really On or Not? [Star Wars Parody Video] Google Updates Picasa Web Albums; Emphasis on Sharing and Showcasing Uwall.tv Turns YouTube into a Video Jukebox Early Morning Sunrise at the Beach Wallpaper Data Networks Visualized via Light Paintings [Video]

  Read the article

• Ngingx wont start with fastcgi_split_path_info" error

  - by Ke

  Hi, I heard that nginx is faster and since im on a VPS with low ram i thought id try it out. I got through this tutorial http://www.howtoforge.com/installing-php-5.3-nginx-and-php-fpm-on-ubuntu-debian But I now get the following error: unknown directive "fastcgi_split_path_info" in /etc/nginx/sites-enabled/default:28 Anyone know what might be causing the problem? I cant find any reference to the problem on Google Also I have heard conflicting things about Nginx vs Apache. Some say use one, some say the other. Im using allsorts such as rewrite rules, proxies etc. Am I setting myself up for a fall by using Nginx? If I go for apache, does anyone know of anyway to tweak it so that it performs better on a low ram VPS? Cheers Ke

  Read the article

• Ngingx wont start with fastcgi_split_path_info" error

  - by Ke

  Hi, I heard that nginx is faster and since im on a VPS with low ram i thought id try it out. I got through this tutorial http://www.howtoforge.com/installing-php-5.3-nginx-and-php-fpm-on-ubuntu-debian But I now get the following error: unknown directive "fastcgi_split_path_info" in /etc/nginx/sites-enabled/default:28 Anyone know what might be causing the problem? I cant find any reference to the problem on Google Also I have heard conflicting things about Nginx vs Apache. Some say use one, some say the other. Im using allsorts such as rewrite rules, proxies etc. Am I setting myself up for a fall by using Nginx? If I go for apache, does anyone know of anyway to tweak it so that it performs better on a low ram VPS? Cheers Ke

  Read the article

• Removing Exchange 2010 and SBS2011 gracefully after migration to Server 2008 Std R2

  - by user145275

  We have recently completed a server replacement for a customer. They had SBS2011 using Exchange 2010. They now have Server 2008 Std R2 and Google Apps email. We have migrated the DHCP, DNS, Filserver and all 5 FSMO roles to the new 2008 R2 server (today). During the grace period for SBS2011 we intend to decomission the old server completely. Previous experience would suggest uninstalling Exchange 2010 then demote SBS2011 then remove from the domain and switch off. Can I simply demote SBS2011 without removing Exchange? Can't really find any walkthroughs on this. My concern is that if we simply turn off SBS2011 the AD is left in a mess with legacy Exchange objects making any potential reintroduction of Exchange difficult in future, plus I want to do it the right way!

  Read the article

• Allow JMX connection on JVM 1.6.x

  - by Martin Müller

  While trying to monitor a JVM on a remote system using visualvm the activation of JMX gave me some challenges. Dr Google and my employers documentation quickly revealed some -D opts needed for JMX, but strangely it only worked for a Solaris 10 system (my setup: MacOS laptop monitoring SPARC Solaris based JVMs) On S11 with the same opts I saw that "my" JVM listening on port 3000 (which I chose for JMX), but visualvm was not able to get a connection. Finally I found out that at least my S11 installation needed an explicit setting of the RMI host name. This what finally worked:         -Dcom.sun.management.jmxremote=true \        -Dcom.sun.management.jmxremote.ssl=false \        -Dcom.sun.management.jmxremote.authenticate=false \        -Dcom.sun.management.jmxremote.port=3000 \        -Djava.rmi.server.hostname=s11name.us.oracle.com \ Maybe this post saves someone else the time I spent on research 

  Read the article

• Getting live traffic/visitor analytics when using a reverse proxy

  - by jotto

  I'm in process of implementing Varnish as a reverse proxy for a Ruby on Rails app and I'm using Google Analytics (JS/client side script to record visitor data) but it's several hours delayed so its useless for knowing what's going on now. I need at a glance live data that includes referring traffic and what current req/sec is. Right now I am using a simple Rack middleware application to do the live stats (gist.github.com/235745) but if the majority of traffic hits Varnish, Rack will never be hit so this won't work. The closest solution I've found so far is http://www.reinvigorate.net/ but it's in beta (there are also no implementation details on their front page). Does Varnish have traffic logs that I can custom format to match my Apache logs so I can combine them, or will I have to roll my own JS implementation like GA that shows the data in real time?

  Read the article

• Learning HTML5 - Best of RSS

  - by Albers

  These are some of the best RSS feeds I've found for keeping up with HTML5. I'm doing jQuery & MVC development as well so you will find the links have a jQuery/MS angle to them. WhenCanIUse The oh-so-necessary caniuse.com, in RSS update format: http://feeds.feedburner.com/WhenCanIUse ScriptJunkie http://services.social.microsoft.com/feeds/feed/query/tag/scriptjunkieLearn/eq/ns/DiscoveryFeedTool/eq/andA good HTML, JavaScript, CSS site hosted by MS Rachel Appel's blog http://rachelappel.com/rss?containerid=13HTML5, JavaScript, and MVC links with a general MS angle Smashing Magazine http://rss1.smashingmagazine.com/feed/Really high quality articles with a focus towards the design side of the web development picture IEBlog blogs.msdn.com/b/ie/rss.aspxNo surprise - the focus is on IE10, but it is really a great resource for new browser tech. MisfitGeek http://feeds.feedburner.com/MisfitGeekJoe recently switched from MS to Mozilla. New job but he still puts out great Weekly Links summaries. The Big Web Show http://feeds.feedburner.com/bigwebshowA podcast covering web development & design topics Elijah Manor/Web Dev .NET I'm cheating on this one a little bit. Elijah is a fantastic JS & web development resource. He has a site at Web Dev .NET, but honestly these days you are better off following him on Google+ ...and you can of course sign up to follow the W3C as well, although I don't think there is an HTML5-specific RSS feed. Good luck!

  Read the article

• How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

  - by pratikk

  I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

  Read the article

• Configure IIS to rewrite IP Address to Site Name

  - by Bath Man

  So i've started my first web site from home, and I'm trying to get it up and running and google crawlable and the like, but I can't seem to figure out how to have my site name returned in the address bar instead of my IP address. I've purchased a domain name for my site on Godaddy and then set it to redirect to my site. When you type in the domain name, you get redirected to http://0.0.0.0/default.aspx (not my real IP obviously), and that stays in the user's address bar. In order to fix that temporarily, I've set up masking on Go Daddy which keeps the URL in the address bar, but just shows my website in a frame. This is fine for users visiting the site, however any kind of automated robot such as GoogleBot cannot discover my content because of the frame. I've looked into ISAPI filters and server-site-rewriting, and the like... but I just can't quite figure out how to do what I need it to do. Any simple suggestions or links would be appreciated.

  Read the article

• JZ0SJ: Metadata accessor information was not found on this database.

  - by Anthony Kong

  The complete message is: (JZ0SJ: Metadata accessor information was not found on this database. Please install the required tables as mentioned in the jConnect documentation The server is Adaptive Server Enterprise/15.5/EBF 18380 SMP ESD#3/P/x86_64/Enterprise Linux/asear155/2531/64-bit/FBO/Fri Jan 14 07:04:05 2011 Google search does not turn up definite answer to the problem. A lof of result are rather dated too. I checked the documentation but it does not mention any tables. What is the root cause of this problem? At the very least I would like to see a list of the required tables somewhere?

  Read the article

< Previous Page | 669 670 671 672 673 674 675 676 677 678 679 680  | Next Page >