Search Results

Search found 22600 results on 904 pages for 'remote connection'.

Page 673/904 | < Previous Page | 669 670 671 672 673 674 675 676 677 678 679 680  | Next Page >

• What is the cause of a vertical white line on an LCD monitor?

  - by Deviruchi D Devourer

  This just happened yesterday when I was browsing the internet. My AOC N941Sw monitor is suddenly showing a thin horizontal white line near the center of the screen. The white line distorts the images. I tried checking the cables for loose connection and dust particles but the white line is still here. There are times the entire image below the horizontal white line flickers and move up and down. When this happens, I just turn off the monitor then the flicker goes away but the white horizontal line is still there. After a few minutes, the same thing happen all over again. Is there a way to fix this?

  Read the article

• cPanel IPTables custom rules

  - by James Haigh

  Hi, I'm trying to allow a host access to port 3306 by IP. I've added the rule and ran an iptables-save and also service iptables save. These commands show as "OK" with no reported errors. And this works absolutely fine. Now, the server hasn't been restarted at all since I've been having this problem, but every day when I start developing on the server that needs mySQL access, it reports that the connection is refused. Back on the mySQL server, all I need to do is service iptables restart and everything then works as normal. The mySQL server is a CentOS cPanel VPS running on OpenVZ. Anyone know how I can make these rules persist? Is it something cPanel is doing overnight that is messing with my config? Thanks.

  Read the article

• VPN stuck on Verifying Username and Password

  - by user2791

  I'm building a new machine and everything is working correctly, except that I can't log on to my VPN. It hangs at the "Verifying username and password..." step, then returns after about 30 seconds claiming Error 721. I have another machine sitting next to this one with the VPN connection configured exactly the same, connecting just fine over the same wifi network, so I'm convinced that there is no server or firewall problem. The VPN works fine. This machine simply can't connect to it given the correct credentials and configuration. Any suggestions?

  Read the article

• NAS device for distributed team

  - by user5959

  We are a distributed team spread across 5 locations. We have a shared drive (1 TB data) at our former location that we are currently accessing via Hamachi VPN. Our shared drive is a network folder on a Windows Server located at one of our locations. The current connection speed is terrible. The upload speed at the current location of the shared drive is very slow. We looking for a NAS device that we can host at another location with better upload speed that all of us can access. I am looking for a NAS device that has these features: Minimal Maintenance as we do not have dedicated IT resources Access data on the device from multiple locations. Ability to create network drive (On Windows Computers Map Network Drive) Upload data from random client computers without having to install software. (Right now, we use LogMeIn Rescue's file manager) Ability handle slow or dropped connections when transferring files (Maximum size 1.5 GB)

  Read the article

• Connecting SQL 2005 to Oracle 10g

  - by Lorn

  Environment: - Oracle 10g database over a windows 32bit 2003 server - SQL 2005 database over a windows 32 bit 2003 server. I am trying to connect the above databases through heterogeneous services. I have updated the following files: TNSNames.ora, Listener.ora and hs.ora. When performing a test connection from SQL developer, I get the following error - ORA 28500 - indicating that the login for SA user is incorrect. I also tried using another authenticated user that has rights to the database. I can successfully connect with SQL 2000. Has anyone experienced such a problem before?

  Read the article

• How can I sync Access databases and keep them up-to-date?

  - by user327472

  I have an Access database on my server. We split it up and use the front-end database for search data and adding new records or reports in local computer. If we update or add a new record, that writes to the back-end of database. I want to use this database in the other building with other servers. Also, those servers have no direct connection. How can I sync both back-end databases to keep the database data up to date? These details may be useful: It's a big amount of data - about 25,750 client records. I guess there are more than 25 tables at 80 MB.

  Read the article

• If the WiFi switched on, should it disable the ethernet? [closed]

  - by Peter Stuart

  My friend having problems with her laptop and I am trying to help her via SMS. She can't get her laptop connected to the internet via the Ethernet connection and there is no WiFi in the area. Could it be because her WiFi is switch on, she is using an acer aspire. If she manually switches it off could that allow the ethernet connecttion to work? Or is it a missing driver? The cable works fine as her someone else tried it. Thanks Peter

  Read the article

• close ssh sessions

  - by egor7

  I'm using ~/.ssh/config for logging to the internal.local corporate server: Host internal.local ProxyCommand ssh -e none corporate.proxy nc %h %p But after closing session (typing exit), my sshd session on server stays still active (I see it through different connection). Hot do I close session or change my config in the appropriate way, to eleminate hang sessions? First check from the second, root session: ps -fu user_name user_name 861 855 0 16:58:16 pts/3 0:00 -bash user_name 855 854 0 16:58:13 ? 0:00 /usr/lib/ssh/sshd After logging out: user_name 855 854 0 16:58:13 ? 0:00 /usr/lib/ssh/sshd Just after scp files to/from the internal.local a new scp sessions still hangs on the server.

  Read the article

• Workaround broken sudo?

  - by perreal

  I managed to break sudo by deleting the libc.so.6 sym-link in /lib. I copied the actual file and created a symbolic link with the same name under my home directory by using LD_PRELOAD=/lib/libc-2.11.3.so. At this point, all binaries linking libc are working through preload except sudo. For sudo, I need to write (and don't know why): $ /lib/ld-linux-x86-64.so.2 --library-path . /usr/bin/sudo but this gives me: $ sudo: must be setuid root Checking the permissions: $ ls -l /usr/bin/sudo $ -rwsr-xr-x 2 root root 166120 So the setuid bit is actually set. Question: I need to create a symbolic link named /lib/libc.so.6 through my active ssh connection without using sudo, or, make sudo work somehow. I don't have the root password and I can't connect through ssh anymore. Is there any other way I can get authorization?

  Read the article

• Does PCI bus really occupy 1.8GB

  - by Neil

  I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

  Read the article

• Hylafax with serial over IP modem

  - by zero_r

  I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

  Read the article

• BumbleBee / getting Nvidia 310.19 Drivers to Work | 12.10

  - by Charles Mynard

  Asus U31JG - A1 Laptop: -Intel Core i3 -Nvidia 415m / Intel HD Graphics ( Optimus Technology ) Hello, I have been trying for about 3 weeks now to get any kind of Nvidia driver to work, and now am determined to get the 310.19 driver to work. I have tried numerous times of which either nothing happened or my interface ( menu bars, the top and left bar on desktop, and the ability to close a window) would disappear. Apparently I'm not making the connection on how to get these to install properly. I have tried numerous other posts and websites and attempted "bumblebee" to no avail. I am wondering if anyone can write a step by step guide of commands that I need to run in terminal to get this to work. I've had to reinstall 12.10, so if you could walk me through the process of getting the drivers downloaded and installed, I would greatly appreciate it. I barely know what I'm doing, and this is quite a turn off for someone new to Ubuntu, I really want to enjoy it but this is preventing me from committing. Thank you in advance, and I apologize for being so flustered / helpless with this but I have ran out of patience with this.

  Read the article

• Laptop forgets second monitor when it goes to sleep

  - by al c

  I recently updated my nvidia driver... now I have to re-establish the connection to my second monitor everytime the laptop goes to sleep. When I open the NVIDIA control panel, the second monitor is listed there but the checkbox beside it has been cleared. Oddly my laptop screen is identified as display #3 and the external screen as display #4. Is there a registry key that I can clear to get them set back to #1 & #2? Will that fix the problem? Or is there a simpler solution. (It's a Dell Studio XPS laptop with GeForce 9500M running Windows Vista 64-bit) TIA Al

  Read the article

• How can I use target mode in Linux with USB?

  - by dash17291

  Kernel 3.5 introduces: This release includes a driver for using an IEEE-1394 connection as a SCSI transport. This enables to expose SCSI devices to other nodes on the Firewire bus, for example hard disk drives. It's a similar functionality to Firewire Target Disk Mode on many Apple computers. This release also adds a usb-gadget driver that does the same with USB. The driver supports two USB protocols are supported that is BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is advertised on alternative interface 0 (primary) and UAS is on alternative interface 1. Both protocols can work on USB 2.0 and USB 3.0. UAS utilizes the USB 3.0 feature called streams support. http://kernelnewbies.org/Linux_3.5 I have an Arch Linux with kernel 3.5.3-1 and wanna try out this feature.

  Read the article

• HAProxy overload protection

  - by user2050516

  using the HAProxy, would it be possible to configure an overload protection, to limit the amount of requests sent to the backing http server(s) to a given rate (z.B 100 Request per second ). If the threshold is exceeded requests should be answered with a default response. I am interested in requests per second not connections per second as a connection can have many requests. And yes to improve the servers is not an option here. If yes a configuration example to achieve that would be excellent. Thank you in advance.

  Read the article

• Network tries to reindentify itself now and then

  - by Don Young

  When the computer starts up it connects itself to the router (ZTE 4G router) automatically, but after I have surfed the web for a while, it tries to identify itself, meaning you get that little blue circle next to the little screen at the corner. When browsing it does not cause any problems, but if I'm streaming a video the video will then stop, I'll have to refresh the page to make the video start again. And if I'm playing a game, LoL for example, the game will freeze for about 2 seconds then continue again (due to lost connection to the internet). I have no virus on my computer, although I had before. I have reset my router, restarted my computer, updated my ethernet driver, checked so that the IPv4 is set on automatic and tried different router channels. I have had this router for a few months and the problem just started recently. Here is the ipconfig screen:

  Read the article

• JBoss DataSource - How can ConnectionCount be larget than MaxSize?

  - by Qben

  I am running JBoss 4.0.5GA and I have stumbled upon a strange scenario (In my eyes anyway). When I decreases the <max-connections> to 1 for a Quartz DataSource and restart the server everything works fine. When I check the JMX console I can see that ConnectionCount and MaxConnectionInUseCount are both 2. The question is, how can the ConnectionCount be higher than the pool MaxSize (Which is 1 in JMX console as expected)? As a note I did this to try to trigger a production problem I have from time to time where a Quartz DB connection cannot be retrieved for some odd reason (Pool not full).

  Read the article

• Is it possible to boot from internet?

  - by Calmarius

  Let's assume the following situation: you have a computer with empty hard disk, and you don't have a CD, floppy, pen drive nearby to boot the computer from. But you have connection to the Internet. Modern computers support network booting using PXE, but I haven't found anything regarding booting via the internet. So, is it possible to use PXE to load an image from the internet and boot it? By having a running system (even a minimal Linux) in RAM, it should be possible to install it on the hard disk, and build up a working system from here.

  Read the article

• XAMPP on windows 7 not working

  - by 404Error

  Hey there, I just installed XAMPP lite on Windows 7. I have two drives - C: for the OS and regular files, and an external drive E:. I insatlled XAMPP lite on E: (on the root), and its been giving me problems. Apache works well enough, but MySQL doesn't work. When I go to http://localhost/phpmyadmin/, it gives me the following error: Error MySQL said: #2003 - Can't connect to MySQL server on 'localhost' (10061) Connection for controluser as defined in your configuration failed. Any ideas as to what could be the problem? I used the zip file for XAMPP lite, the 32 bit version. This is on Windows 7 Home premium. Thanks!

  Read the article

• SQL Server 2005/2008 Licensing Decision

  - by Hakim

  Hello, I have purchased a dedicated server from a reputable Hosting company. They only have Windows Server 2008 OS installed on it and NO Sql server. Server Configuration is Intel Dual core Processor with 2GB of RAM and 100GB HDD. I wanted to host my web services on that server which will be using the MS SQL Server 2005 at the backend.There are multiple web services and each using a different Database. Microsoft has CAL basis Licensing , Which I understand is based on number of users accessing the database directly ( I may be wrong ) . But my users will be accessing the webservice and no direct connection to the database as such. Yes but the number of users accessing the web server cannot be known and is not under my control. Which Licensing is best suited for this kind of setup ? I don't need analysing and BI services right now ,but i may want to upgrade that in future may be. Any help will be appreciated. Thanks

  Read the article

• What is the cost of running a desktop machine at home?

  - by vinc

  How much does it (roughly) cost to leave my personal home computer running 24/7 for a year? I'm not doing anything unusual; I run a webserver for myself, surf the web, write some code. I don't have any specific specs. So for example there might be the cost of electricity, internet connection, and possibly some other factors that I've overlooked. I'm trying to decide whether it would be a good idea to turn off my computer when I'm asleep and not using it. Is the cost negligible, maybe 1 USD per day, something in between or more?

  Read the article

• Prevent runaway threads and ultimately physical overheating and battery drain on Android [migrated]

  - by foampile

  I was wondering if there is a system monitor app that will raise (audible) alerts and offer app closure if it detects runaway threads on Android that cause physical overheating and battery drain. E.g., I just had to turn my phone off because there was a runaway thread that I think was constantly trying to refresh FB where there was very poor connection, so it was going in a virtually endless loop. But I get that with other apps too and not just Facebook. I'd like to actually shut apps down when they're detected. I am not kidding, I nearly burned my fingertips when I touched my phone -- it was on for only 2 hrs and the battery was almost dead. It is because 4G is very poor inside my office building and I checked Facebook walking between my vehicle and the building this AM. After that, the app kept trying to refresh continuously without success and overheating the phone.

  Read the article

• Solaris 11 VNC Server is "blurry" or "smeared"

  - by user12620111

  I've been annoyed by quality of the image that is displayed by my VNC viewer when I visit a Solaris 11 VNC server. How should I describe the image? Blurry? Grainy? Smeared? Low resolution? Compressed? Badly encoded? This is what I have gotten used to seeing on Solaris 11: This is not a problem for me when I view Solaris 10 VNC servers. I've finally taken the time to investigate, and the solution is simple. On the VNC client, don't allow "Tight" encoding. My VNC Viewer will negotiate to Tight encoding if it is available. When negotiating with the Solaris 10 VNC server, Tight is not a supported option, so the Solaris 10 server and my client will agree on ZRLE.  Now that I have disabled Tight encoding on my VNC client, the Solaris 11 VNC Servers looks much better: How should I describe the display when my VNC client is forced to negotiate to ZRLE encoding with the Solaris 11 VNC Server? Crisp? Clear? Higher resolution? Using a lossless compression algorithm? When I'm on a low bandwidth connection, I may re-enable Tight compression on my laptop. In the mean time, the ZRLE compression is sufficient for a coast-to-coast desktop, through the corporate firewall, encoded with VPN, through my ISP and onto my laptop. YMMV.

  Read the article

• Set up router to vpn into proxy server

  - by NKimber

  I have a small network with a single LinkSys router connected to broadband in US via Comcast. I have a VPN proxy server account that I can use with a standard Windows connection, allowing me to have a geographic IP fingerprint in Europe, this is useful for a number of purposes. I want to setup a 2nd router that automatically connects via VPN to this proxy service, so any hardware that is connected to router 2 looks as though it is originating network requests in Europe, and any hardware connected to my main router has normal Comcast traffic (all requests are originating from USA). My 2nd router is a LinkSys WRT54G2, I'm having trouble getting this configured. Question, is what I'm trying to do even feasible? Should the WRT54G2 be able to do this with native functionality? Would flashing it with DD-WRT allow me to achieve my objectives?

  Read the article

• Hard drive skipped in boot

  - by Yasin

  Good evening. I just installed Ubuntu 12.04 using a USB, but right after the install, after restarting the machine, I get a message asking me to insert a bootable drive. My boot settings in Bios have the hard drive first, then DVD, then USB stick, and I have two systems installed, Windows 7 and Ubuntu 12.04. I suspected the hard drive got somehow disconnected internally, so I checked but everything was in place. I used the live USB to start Ubuntu, and I could see the hard drive and mount whatever partition I wanted. The one that contains the recently installed Ubuntu, looks the same. (It hasn't been deleted or anything). I'm not sure if this is a hardware problem or a loader(grub) problem, because the hard drive is visible. Only it isn't seen by the BIOS. My only means of internet connection is a USB modem, which doesn't work when I'm using the live USB, so I have can't download anything from the internet, in case someone asks. I also reinstalled Ubuntu 12.04, to no avail. This is my second problem with this laptop, and Ubuntu, and it's not even a week old. I hope this one gets solved. Thank you.

  Read the article

< Previous Page | 669 670 671 672 673 674 675 676 677 678 679 680  | Next Page >