Search Results

Search found 19782 results on 792 pages for 'device emulator manager'.

Page 675/792 | < Previous Page | 671 672 673 674 675 676 677 678 679 680 681 682  | Next Page >

• How to make a Linux software RAID1 detect disc corruption?

  - by Paul

  This is one of the nightmare days: A virtualized server running on a Linux SW-RAID1 runs a VM that exhibits random segfaults in seemingly random codechunks. While debugging I find that a file gives different md5sums on each and every run. Digging deeper I find this: The raw disc partitions that make up the RAID1 mirror contain 2 bit-differences and ca. 9 sectors are completely empty on one disc and filled with data on the other disc. Obviously Linux gives back a sector from a undeterministically chosen disc of the mirror set. So sometimes the same sector is returned OK, sometimes the corrupted is given back. The docs say: RAID cannot and is not supposed to guard against data corruption on the media. Therefore, it doesn't make any sense either, to purposely corrupt data (using dd for example) on a disk to see how the RAID system will handle that. It is most likely (unless you corrupt the RAID superblock) that the RAID layer will never find out about the corruption, but your filesystem on the RAID device will be corrupted. Thanks. That will help me sleep. :-/ Is there a way to have Linux at least detect this corruption by using sector checksumming or something like that? Would this be detected in a RAID5 setup? Is this the moment I wish I used ZFS or btrfs (once it becomes usable without uber-admin capabilities)?

  Read the article

• OS X can connect to Windows machine, but can't access shared folders

  - by Bonnie

  I can create new folders on my Windows XP machine, set them to "shared". On my Mac, I pick Finder → Go → Connect to Server → smb://192.168.1.4 → Connect → Name / Password. It even shows me all the names of the newly created shared-folders on my PC, but when I try to actually connect to any of them I get connection failed, there was an error connecting Any idea on what would cause that? The fact that it successfully gets so far—to actually showing me my PC share-names—must mean I have 99% of this working correctly, i.e. the physical connection, the IP address, the user name, the password, etc. Still, I can't seem to access the folders themselves. I've tried this with my Windows XP firewall on/off, and Norton AntiVirus on/off. Same problem. Everything did work fine, 4 months ago. Were there any odd OS X or Windows updates released recently? I always apply them all. smbclient on the Mac does correctly find the XP machine, my XP user name, and accepts my XP password. I get the following from that smbclient command: Doing spnego session setup (blob length=16) server didn't supply a full spnego negprot Got challenge flags: ... Got NTLMSSP flags: ... Got NTLMSP flags: ... Domain=[XPMACHINE] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager] tree connect failed: NT_STATUS_INSUFF_SERVER_RESOURCES I'm not sure why a standard XP box can't "supply a full spnego negprot". Whatever that means. Using XP's RegEdit to change my IRPStackSize from 11... to 13, 15, 20, 22... still gives that "NT_STATUS_INSUFF_SERVER_RESOURCES" error on the Mac.

  Read the article

• Is VGA port hot-pluggable?

  - by Martin Bøgelund

  In meetings, I often see people detaching the VGA connector from one running laptop and connecting it to another, while the projector is still on. Is this 100% risk free, and OK by design of the VGA standard? If there's a risk involved in hot-plugging VGA, can it be removed by turning off or suspending either laptop, display, or both? I see this being done all the time without causing disaster, so clearly I'm not interested in answers stating "we do it all the time, so it should be OK!". I want to know if there's a risk - real or in theory - that something breaks when doing this. EDIT: I did an internet search on the topic, and I never found a clear statement as to why it is safe or unsafe to hot swap VGA devices. The typical form is a forum question asking basically the same question as I did, and the following types of statements Yes it's hot swappable! I do it all the time! It involves some kind of risk, so don't do it! You're some kind of moron if you think there's a risk, so just do it! But no explanation as to why it safe or not... Joe Taylors answer below contains a link to a forum post and answers that basically give me the same statements as mentioned above. But again, no good explanation why. So I looked for an actual manual for a projector, and found "Lenovo C500 Projector User’s Guide". It states on page 3-1: Connecting devices Computers and video devices can be connected to the projector at the same time. Check the user’s manual of the connecting device to confirm that it has the appropriate output connector. [image] Attention: As a safety precaution, disconnect all power to the projector and devices before making connections. But again, no good explanation.

  Read the article

• Screen Flickering: Hardware or Software?

  - by Wesley

  I have a Samsung N120 netbook (upgraded to 2GB DDR2 RAM) and there has been a screen flickering issue for some time now. However, I have not been able to accurately determine whether it is a software or hardware issue. Here are some of the symptoms: The flicker is white-colored and shows up as vertical lines. Flickering or not, there may be occasionally some random blue patterns (no image distortion) The screen tends to flicker more when the screen is not tilted back all the way. When tilting the screen back and forth, the screen will usually flicker. Some images on the screen may randomly distort without full-on flickering. The screen will flicker only on certain websites, but not on others. A certain part of a webpage may constantly be distorted randomly, even when scrolling. While flickering, the mouse will not move though I'm moving my finger along the touchpad. A connected external monitor does not have any problems. The flickering is completely random and does not seem to follow any CPU/GPU usage trends. Flickering usually gets worse when the screen brightness is turned higher. There will be flickering on battery and while plugged in. Search up "Samsung N120 - Screen Flickering" on YouTube for an idea of what the flickering looks like. However, there is no visible distortions and the flickering seems to stop when the screen has dimmed. Since the problems started, I tried formatting and using Windows 7, then formatted again and went back to Windows XP. The screen was also replaced sometime during this past summer. The uninstallation of the Samsung Battery Manager (on the original install of XP) seemed to reduce the flicker partially, but eventually got worse. So, what could possibly be the problem?

  Read the article

• Is this a solution for having multiple SSL certificates on the same IP

  - by Saif Bechan

  I am running CentOS running on a VPS. I read some guides on having multiple SSL certificates on the same system, but I can not get the basics to work. The guide I got that makes the most sense to me is the doing the following. In CentOS I can make virtual NIC's. So I made 2 virtual NIC's to start with. 192.168.10.1, 192.168.10.2. Now I work in ISP manager Pro, so this is listening on my primary ip 1.1.1.1 For each website I have them listening on 192.168.10.1:80, 192.168.10.1:443 In the hosts file I made the following 2 entries 192.168.10.1 1st.com 192.168.10.2 2nd.com Now the strange thing is that when I browser to 1st.com I do not get the website located at 192.168.10.1, I get the website located at my prim IP 1.1.1.1 Should I do something like forwarding or routing for this setup to work? And the basic question: Will this setup even work? Are the SSL certificates based on the IP adress, or are the based on the host name, 1st.com and 2nd.com.

  Read the article

• How to Load Balance 2 Internet Connections on a Windows 7 machine?

  - by Jimmy Chandra

  It's sort of related to this particular question, but that one is on Mac. I am looking for similar solution on Windows 7. I have 2 network connections: (Connection A) Wireless terminal connecting to ISP A (3G / EVDO internet provider) (Connection B) Broadband wired connection connecting to ISP B (Cable internet provider) Both has access to the internet. When I try connecting to a website and checking the networking tab on my Task Manager, I only see the network traffic being routed to only Connection A. Is there a way to make the computer to utilize both network (in a sense using all the bandwidth available from both the Cable ISP and the 3G / EVDO ISP) at the same time? If so, what do I need to do to set this up ... on Windows 7? Here is a bit more info on my network connections (ipconfig /all): PPP adapter Wireless Terminal: IPv4: aa.bb.ccc.ddd(preferred) Subnet mask: 255.255.255.255 Default Gateway: 0.0.0.0 DNS: aa.ee.f.ggg aa.ee.f.hhh Primary Wins: jjj.ii.k.l Secondary Wins: jjj.ii.k.m Ethernet adapter LAN: IPv4: 192.168.1.100 (connected to a router by wired that itself connect to a cable modem) subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 (the wireless router) DHCP: 192.168.1.1 (the wireless router) DNS: xxx.yy.zz.ww rr.sss.t.uuu For my own privacy, I don't believe the actual number matters, the patterns are representative of the ip numbering scheme...

  Read the article

• Debian: What are these files in /sys/devices/pci0000:00/ for?

  - by muhuk

  I am running Debian Squeeze on an MSI M670 laptop. I have these following files on my root drive, each 256MB: file:///sys/devices/pci0000:00/0000:00:05.0/resource1 file:///sys/devices/pci0000:00/0000:00:05.0/resource1_wc Here is my lspci output: muhuk@debian:~$ lspci 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 04:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 04:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 04:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 04:09.0 Network controller: RaLink RT2561/RT61 rev B 802.11g I am speculating these have something to do with the shared RAM my GPU is using. But why a file on disk? And why two of them?

  Read the article

• How do you recreate the System Recovery environment in Windows 7?

  - by Howiecamp

  I'm running Windows 7 Home Premium RTM (64-bit) and I want to take advantage of the system recovery tools (eg the Command Prompt) without using the Windows 7 DVD. My understanding is that this environment (WinRE) should be installed to your HDD by default as part of the Windows 7 installation. However, when I hit F8 on boot and select "Repair", I get: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. The "Info" line seems like the smoking gun. My next step was to boot from the Windows 7 DVD, and choose "Repair". It indicated my Recovery Environment wasn't on the Windows 7 boot menu (perfect) and offered to fix it. I said yes and rebooted, however same issue as above. In addition, when I booted in to Windows 7 and I looked at the boot menu options, the recovery/repair option was not there. Only my Windows installation. Finally, I ran the Disk Management tool (diskmgmt.msc) and took a look at the contents of my "System Reserved" partition (which was set to "Active" as normal). It's unclear to me what the contents should look like, however it is my understanding that the WinRE environment gets installed to this partition. (As part of the above troubleshooting I followed http://superuser.com/questions/25728/how-to-fix-windows-7-boot-process which lead to http://www.sevenforums.com/tutorials/668-system-recovery-options.html).

  Read the article

• How do you do a keyword search the Services.msc (mmc) window in Windows 7?

  - by Warren P

  When you want to run a service, you have very limited capabilities, in all current Windows versions, as far as I can tell. I usually start Services by typing "services.msc" into the Start-Run box, on most versions of Windows, this works. I know how to click the "Name" column in the MMC view of Windows Services. If you know what the first few characters of a service name is, you can usually sort by the name, and type the prefix to scroll the list down (find Windows Search for example). This seems pretty weak to me, so I spent some time searching the interwebs for tools that do a better job of managing services. Usually I have a keyword that I know "fooWare" might be the keyword, and I need to find the (usually badly named) service and start it and stop it. This is often WAY too hard. The best I could do is "NET SERVICES" from the command line, and maybe add a grep in there, but that doesn't list every service, only a few of them. And the MMC snap-in in Win7 now has an Export List button, exporting to csv text file feature which I have used from time to time, to export and then search. I have thought of writing my own tool. I'm hoping a better "service manager" utility exists out there that sysadmins use. I'd like a search box at the top right corner, kind of the same way that the Add-Remove-Programs dialog in Win7 and Vista has a search facility. Does such a services utility exist out there?

  Read the article

• Why can't I bind to 127.0.0.1 on Mac OS X?

  - by Noah Lavine

  Hello, I'm trying to set up a simple web server on Mac OS X, and I keep getting an error when I run bind. Here's what I'm running (this transcript uses GNU Guile, but just as a convenient interface to posix). (define addr (inet-aton "127.0.0.1")) ; get internal representation of 127.0.0.1 (define sockaddr (make-socket-address AF_INET addr 8080)) ; make a struct sockaddr (define sock (socket PF_INET SOCK_STREAM 0)) ; make a socket (bind sock sockaddr) ; bind the socket to the address That gives me the error In procedure bind: can't assign requested address. So I tried it again allowing any address. (define anyaddr (make-socket-address AF_INET INADDR_ANY 8080)) ; allow any address (bind sock anyaddr) And that works fine. But it's weird, because ifconfig lo0 says lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 So the loopback device is assigned to 127.0.0.1. So my question is, why can't I bind to that address? Thanks. Update: the output of route get 127.0.0.1 is route to: localhost destination: localhost interface: lo0 flags: <UP,HOST,DONE,LOCAL> recvpipe sendpipe ssthresh rtt,msec rttvar hopcount mtu expire 49152 49152 0 0 0 0 16384 0

  Read the article

• Problem with network after malware attack

  - by Cruelio

  Im trying to help some friends with a Win XP machine. I got rid of the malware using Malware Bytes, and HiJackThis. But now they(I) have another problem. When the computer boot into Windows it seems fine. When I start Internet Explorer the browser window opens just fine, but nothing happens for at minute or two. After the two minutes of waiting, the network icon appears in the taskbar next to the clock, and then everything works. The computer is connected to the internet using a Ethernet adapter. I have looked at the Rvent Log and found an error from Perfnet with eventid 2004 <Provider Name="PerfNet" /> <EventID Qualifiers="49152">2004</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> What I have tried so far: In the device manager i have uninstalled the Ethernet adapter and installed it again. I have uninstalled and installed the Windows File and Printer Sharing service. I have verified that both server and workstation services are started. What should I do next?

  Read the article

• Windows Server 2012 Hyper-V very slow

  - by Matt Taylor

  I have been running several Hyper-V VMs on Windows Server 2008 R2 for the past couple of years and enjoying perfectly adequate performance for my testing/development/r&d environments. I'm a software developer so my hardware knowledge is basic however I built the rig using: •Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Motherboard •Intel Core i7 960 3.20GHz (Bloomfield) (Socket LGA1366) •24GB triple channel RAM The host OS is running on an OCZ SSD and all the VMs are running on a 2TB Marvell SATA3 RAID 0 array consisting of 2 Western Digital Caviar Black 7,200rpm drives. I have tested the speed of the 2TB drive and appear to be getting less than 3Mbs but it can adequately run a 4 VM farm including a DC, (SQL) database and IIS application servers. I recently upgraded the SSD on which the host runs to a 256GB OCZ Vertex 4 and took the opportunity to upgrade to Windows Server 2012 and installed the Hyper-V role. I tried importing one of my existing Windows Server 2008 R2 VMs (and converted it to .vhdx) plus I have tried creating a brand new Windows Server 2008 R2 VM but both are running extremely slowly and I can see nothing obvious using the host and guest Task Manager/Resource Monitor tools. In both cases the VM has 8GB RAM (fixed), 4 CPUs, fixed size HD (not expanding) and is using an external virtual network running on a separate NIC to the host. I have upgraded the BIOS to the latest available version and checked the virtualization settings. I have run out of "obvious" (to a developer) things to check/configure and my next option will be to re-install the host OS but before I do I would very much appreciate any advice from any experts out there. Thanks

  Read the article

• Sporadic email delivery to one user

  - by minamhere

  I have a user that occasionally does not receive emails from outside our organization. It does not seem to matter whether the other person is replying to an initial email or sending a new message. I have checked the Exchange System Manager and there is no record of the sender at all during this time period. No record of the message getting captured by the spam software (GFI Mail Essentials). The sender does not receive an NDR or any other indication that the message didn't arrive. It seems to me that these messages are not even getting to our servers at all. But, this is only impacting one user(that I am aware of) and not all the time. Some messages get through without any problem, others just disappear. The senders are not related at all. One is in another country, one uses AOL, one uses a corporate Exchange server locally. I can't seem to find a pattern. Where else can I look to try to figure out where these messages are going/getting captured? Are there additional logs that I can enable either within GFI or Exchange that might shed some light on this? Thanks. We are using Exchange 2003 on Server 2003. Desktop client is Outlook 2003 on Windows XP Pro.

  Read the article

• How to best convert a fully encrypted drive into a Virtual Machine?

  - by SiegeX

  I have a Windows XP laptop that uses GuardianEdge's Encryption Plus to fully encrypt the drive from bootup. What I would like to do is install a much larger (unencrypted) hard drive with Windows 7 on it and turn this fully encrypted drive into a Virtual Machine that can be ran in either Virtualbox or VMWare on the Windows 7 host. I've read many howto's that talk about using an imaging tool like Acronis True Image to image the drive then passing that through VMWare's VCenter Converter to turn it into a format that VMWare can understand. Unfortunately this seems to all far apart when you are dealing with a fully encrypted drive because Acronis cannot recognize the file system and attempts to do a sector-by-sector copy of the entire hard drive. This is extremely wasteful since the drive is 120GB but the file system is only using 10GB of that. Even if I were OK with going with an inefficient 120GB sector-by-sector copy, I'm not sure that this would even work under VMWare or Virtualbox. Unfortunately, the Guardian Edge boot-time login comes up only after the hard drive has been selected as the boot device; preventing me from being able to decrypt the drive prior to booting an Acronis True Image CD so that it can recognize the underlying file system. I'm sure I'm not the first person to want to do this but I am having a heck of a time finding solutions to this problem. All suggested/answers welcomed. Thanks

  Read the article

• Installing Windows Management Framework 3.0 basically destroyed WMI, how can I fix it without reinstalling the O.S.?

  - by Massimo

  Related, of course, to this question. Before discovering it was somewhat... dangerous, I installed Windows Management Framework 3.0 on a number of Windows Server 2008 R2 SP1 servers, and WMI got completely trashed on all of them. This is what the WMI namespace looks like on a normal server (this is from Server Manager - Configuration - WMI Control): This is what it looks like after installing WMF 3.0: Yeah. Everything except WMF 3.0's new features is gone. Needless to say, nothing seems to work anymore on those servers. And no, this is not due to some strange installation error, this happened on three servers which were perfectly working before installing WMF 3.0, and on all of them the installation completed succesfully. Admittedly, one of them had a somewhat complex setup (various System Center products and SQL Server instances)... but two of them are just plain standard domain controllers which do nothing else at all. How can I fix this mess without having to reinstall the O.S. on these servers? And why did it happen in the first place?

  Read the article

• What is easiest no fail way to publish asp.net app?

  - by Maestro1024

  What is easiest no fail way to publish asp.net app? Sorry a bit of an open ended question but I am having issues deploying an asp.net report project and any solution to get the site up is fine. I am running Win7/SQL 2008 and want to publish a asp.net report site that I created in VS 2008. Website launches when I run in debug in Visual studio but I want to publish the site so that it can be seen on the LAN. I published the files off to a folder and started up the IIS manager and added a new site and pointed to that folder. Set the permission on the folder to share to everyone. However when I go to the DNS name I put in for the website it does not launch. Any ideas on this? I see websites out there talking about a web sharing tab on the folder properties but I do not see that when I go to folders. Why might that be? Another avenue I have not pursued yet is publishing directly to a website. Has anyone tried that? Is that better or worse than publishing to filesystem?

  Read the article

• How to export SQL Server data from corrupted database (with disk write error)

  - by damitamit

  IT realised there was a disk write error on our production SQL Server 2005 and hence was causing the backups to fail. By the time they had realised this the nightly backup was old, so were not able to just restore the backup on another server. The database is still running and being used constantly. However DBCC CheckDB fails. Also the SQL Server backup task fails, Copy Database fails, Export Data Wizard fails. However it seems all the data can be read from the tables (i.e using bcp etc) Another observation I have made is that the Transaction Log is nearly double the size of the Database. (Does that mean all the changes arent being written to the MDF?) What would be the best plan of attack to get the database to a state where backups are working and the data is safe? Take the database offline and use the MDF/LDF to somehow create the database on another sql server? Export the data from the database using bcp. Create the database (use the Generate Scripts function on the corrupt db to create the schema on the new db) on another sql server and use bcp again to import the data. Some other option that is the right course of action in this situation? The IT manager says the data is safe as if the server fails, the data can be restored from the mdf/ldf. I'm not sure so insisted that we start exporting the data each night as a failsafe (using bcp for example). IT are also having issues on the hardware side of things as supposedly the disk error in on a virtualized disk and can't be rebuilt like a normal raid array (or something like that). Please excuse my use of incorrect terminology and incorrect assumptions on how Sql Server operates. I'm the application developer and have been called to help (as it seems IT know less about SQL Server than I do). Many Thanks, Amit

  Read the article

• How to setup firewall to allow internet connection sharing via Wifi USB stick?

  - by hannanaha

  I have a Windows8 computer linked to the internet via an ethernet cable ("Ethernet" network connection). I have attached to it a DLink Wifi USB stick, and I'm trying to share the main PC's internet connection with my Android phone via a local wifi network. I am using the following batch file to set up this network: netsh wlan set hostednetwork mode=allow ssid=MyWifiName key=password keyUsage=persistent netsh wlan start hostednetwork After I run this script, I can see a new network connection appear in "Control Panel\Network and Internet\Network Connections" named "Local Area Connection *12", and I can see "MyWifiName" on the Android phone. The device name for this connection on the PC is "Microsoft Hosted Network Virtual Adapter". I also set up the "Ethernet" connection to share Internet with "Local Area Connection *12". However, the Android phone usually doesn't manage to obtain an IP from the wireless network, and when it does, there still seems to be no connectivity to the internet. When I turn off the Windows Firewall completely, or even just for "Local Area Connection *12", the Android connection is perfect. My questions are: How should I set up the Windows firewall to allow the phone to connect properly? Is there a specific rule I need to add to the Windows firewall advanced settings? [Note: the above method worked great in Windows 7, without any specific tinkering with the firewall]. Is it safe to turn off the firewall specifically for the "Local Area Connection *12" (the wifi connection) if the main Ethernet connection is still protected by the firewall? Thanks in advance.

  Read the article

• What is proper relationship between /etc/hosts and DNS A records for a Linux server?

  - by MountainX

  I have an Ubuntu server. It is going to be a web server with a URI of www.example.com. I have a DNS A record pointing www.example.com to the server's IP address. Let's say I pick "trinity" as the hostname for this server. I want to set up the DNS records correctly. I need reverse DNS to www.example.com, so a CNAME for www.example.com doesn't seem appropriate. Here's my question: Is it considered best practice to set up two DNS records (which in my case would likely be two A records), one for www.example.com and one for trinity.example.com, both pointing to this server's IP address? (Or, even if it is not accepted as a best practice, is it a good idea?) If so, would the following be a proper /etc/hosts file? $ cat /etc/hosts 127.0.1.1 trinity.local trinity 99.100.101.102 trinity.example.com trinity www.example.com This server is a Linode and Linode's docs seem to imply that the above approach is best (if I am reading them correctly). Here's the relevant section. I bolded the line that seems to apply here. Update /etc/hosts Next, edit your /etc/hosts file to resemble the following example, replacing "plato" with your chosen hostname, "example.com" with your system's domain name, and "12.34.56.78" with your system's IP address. As with the hostname, the domain name part of your FQDN does not necesarily need to have any relationship to websites or other services hosted on the server (although it may if you wish). As an example, you might host "www.something.com" on your server, but the system's FQDN might be "mars.somethingelse.com." File:/etc/hosts 127.0.0.1 localhost.localdomain localhost 12.34.56.78 plato.example.com plato The value you assign as your system's FQDN should have an "A" record in DNS pointing to your Linode's IP address. For more information on configuring DNS, please see our guide on configuring DNS with the Linode Manager.

  Read the article

• Western Digital My Book not recognized by WD software

  - by Kari

  A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

  Read the article

• Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

  - by Matt Taylor

  I recently did a full upgrade of Windows 7 on my Thinkpad. Everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen before the Windows logo appears. Disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this won't boot with battery plugged in is greatly appreciated. I need to take this battery out on the road/trains, etc. A little more detail on this story. The battery I had inserted when doing the (failed) boot was a long life battery. I have not tried inserting this battery when Windows is logged in. I have another (normal life) battery that I have charged up within Windows. It has just got to 100% and I am about to reboot with it in. I am using the Lenovo power manager to diagnose the battery - all seems OK. I will report back shortly as to the outcome. OK, so I chose the reboot option from within Windows, the machine seemed to shutdown okay, but then stalled. It didn't turn off completely and didn't reboot, but just sat, with the fan humming, somewhere in between! I had to hold the power button in for a few seconds until the fan stopped and then hit the power button again to boot the machine from fresh. One good thing, with this battery (the normal one) it booted into Windows 7 the first time with a battery! So, now I have rebooting issues. I have 3 errors in the event log: A timeout was reached (30000 milliseconds) while waiting for the lxdxCATSCustConnectService service to connect. The lxdxCATSCustConnectService service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. The following boot-start or system-start driver(s) failed to load: cdrom Any thoughts?

  Read the article

• Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

  - by Bluebill

  I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: fsck from util-linux-ng 2.16 There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots?

  Read the article

• Windows Server 08 R2 file share File locking, OSX clients

  - by Keith Loughnane

  I've spent the last two weeks banging my head against this wall. I think I'm starting to understand the problem though. I manage a design company and they have 5 macs (OSX 10.5/.6/.7) connected over SMB to a Windows 2008 R2 file server, another machine functions as Domain Controller (that might not matter). All the macs can connect ok, no issues finding the server or logging in. For the most part things are ok. The problem is files locking up. I thought it was a permissions issue at first but it seems to be file locking. The users open a file; .ind, .pdf etc the file opens, the software reads it and closes it. That's fine, but the folder above the folder locks, it can't be moved and it can't be renamed. Eg: /Working/Project01/Imagefiles/image.pdf /Finished/ The user opens image.pdf, closes it and wants to move the whole Project01 folder into Finished. It gives a username/pass dialogue and then does nothing, no error, or just does nothing. Trying to rename gives a dialogue that says you don't have permission. It looks like it's looking for permission locally, which is why I spent about a week looking at that. Eventually I found that Finder on the macs seems to be keeping the folders open. I can work around it by Killing finder, remounting the shared drive or closing the file through the server manager but this just proves the theory it's not a solution. Has anyone dealt with this problem?

  Read the article

• Determining the Source of a Given File System Mount on Unix [migrated]

  - by phobos51594

  Background Recently I have run into a bit of a snag on my home FreeBSD server. I recently upgraded it to the latest stable release, and I have noticed some strange behavior with the /var partition. Originally, I had the system configured such that /var had its own partition with /var/run and /var/log in memory disks (/tmp, too). After the upgrade, I notice there is a new, fourth memory disk mounting directly to /var that I had not set up manually and is not in my fstab. It is only 28 megs or so in size and is causing problems when trying to update my ports collection. The ramdisk mounts atuomagically at boot and cannot be unmounted while in multi-user mode. If I drop to single user mode, I am able to unmount it without issue, however rebooting causes it to pop right back up. System specifications have been included at the end of the post. Question Is there any way to determine exactly what is mounting a given memory disk (or any filesystem, for that matter) after it has been mounted? Alternately, does anybody have any ideas what might have caused the new /var ramdisk to pop up? System Specification # uname -a FreeBSD sarge 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #0: Thu Nov 22 14:02:13 PST 2012 donut@sarge:/usr/obj/usr/src/sys/GENERIC i386 # df Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/da0s1a 515612 410728 63636 87% / devfs 1 1 0 100% /dev /dev/da0s1d 515612 287616 186748 61% /var /dev/da0s1e 6667808 2292824 3841560 37% /usr /dev/md0 63004 32 57932 0% /tmp /dev/md1 3484 8 3200 0% /var/run /dev/md2 31260 8 28752 0% /var/log /dev/md3 31260 512 28248 2% /var <-- This # cat /etc/fstab # Device Mountpoint FStype Options Dump Pass# /dev/da0s1a / ufs rw,noatime 1 1 /dev/da0s1d /var ufs rw,noatime 2 2 /dev/da0s1e /usr ufs rw,noatime 2 2 md /tmp mfs rw,-s64M,noatime 0 0 md /var/run mfs rw,-s4M,noatime 0 0 md /var/log mfs rw,-s32M,noatime 0 0 Thank you in advance for any assistance.

  Read the article

• Ubuntu 12.04 open port 80 inside WLAN

  - by Eduard

  I have an nginx server running on ubuntu 12.04 that serves http through port 80 and https through port 443. Everything works fine if I access it from the same computer via localhost, 127.0.0.1 or the local IP 192.168.0.11. If I try to access the server from another computer in the same VLAN it does not work for http; it works for https. I have changed my nginx configuration to also listen to port 8000 for http; I can then access http from the other computer in the same VLAN via "http://192.168.0.11:8000". I also have a web server running on port 80 on a windows machine and can access it from another device in the same VLAN, therefore the router is not blocking incoming http traffic. The nginx process is run by root. I have used tcpdump and I see that packets are arriving to Ubuntu: 192.168.0.16.49735 192.168.0.11.80 and that some response is being given 192.168.0.11.80 192.168.0.16.49735 (I do not know what the response is though). There is no request arriving at the nginx web server (I have checked the access log). I have iptables empty. I have unsuccessfully tried to find a solution for a long time to this, it has now become a matter of happiness or bitterness :).

  Read the article

< Previous Page | 671 672 673 674 675 676 677 678 679 680 681 682  | Next Page >