Search Results

Search found 90790 results on 3632 pages for 'user accounts'.

Page 678/3632 | < Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >

  • vim indentation for bullet lists

    - by Oliver
    hi, all I often write text with format like this in VIM My talking points: - talking point 1 - talking point 2 .... continue on point 2 Ideally, I would hope VIM can auto align it for me such as: - talking point 1 - talking point 2 continue on point 2 Is this possible? thanks Oliver

    Read the article

  • Windows 7 x64 installation freezes on new PC build

    - by jhsowter
    Symptoms While attempting to install Windows 7 (64 bit) on my new PC build, it freezes usually at the point where it is expanding the windows image, but has frozen as early as accepting the licence agreement, and as late as just after the first restart. My specs are at the bottom of the post. So far I have tried the following to identify the problem, in rough chronological order: Tried different hard drives with different sata cables. Same symptoms. I later used a different computer to install windows on the same hard drive with no problems. Tried the RAM in different slots, and tried one RAM stick instead of two. Same symptoms. Updated the BIOS to 1.60. Same symptoms. Ran Memtest86+ with RAM in dual channel. It passed about 6 times when I left it running overnight. Used USB to install windows instead of an optical drive. Same symptoms. Change SATA configuration from AHCI to IDE. Same symptoms. Tried various different SATA ports. Same symptoms. Updated BIOS to 1.70. Same symptoms. I saw the RAM did not list my motherboard as being supported even though the motherboard did list the RAM as being supported. So I tried some Kingston DDR3 1333MHz RAM instead. Same symptoms. Other (possibly) pertinent information My CPU idles at about 30 °C. I can't tell what it gets to when it's working. When I installed the CPU, the lever which locks the CPU in place took quite a bit of force to pull down. Now I didn't just yank it down without rechecking the CPU was seated properly about 5 times, but it does seems unusual, and I wonder if the CPU was seated badly if I would see these symptoms? I am out of ideas and don't know how to diagnose any further. I suppose either the motherboard or CPU must be the problem. I am on the verge of taking it to a specialist. The Question How should I proceed from here? Is there anything I can rule out as being the source of the symptoms I am seeing? My Specs CPU: Intel i5 3570k RAM: G.Skill RipjawsX 8GB kit HDD: single 3.5" 500GB SATA or 160GB 2.5" SATA (at different times and sometime together. But no RAID or anything). MB: ASRock Extreme4 Z77 PSU: Silverstone Strider Plus 600W ST60F-P

    Read the article

  • Free Windows traffic monitor that can run a command when reaching a limit

    - by leromarinvit
    Does anyone know a free traffic monitor tool for Windows XP which can run a configurable program when reaching a limit? Hoo Net Meter and DU Meter can do that, but they both cost money. What I'm trying to do is throttle the connection when getting close to the monthly limit, so that watching YouTube or downloading large files isn't fun any longer, but e-mail or looking something up still work. The throttling part is settled, Traffic Shaper XP works nicely. I just need something to automatically call a batch script when reaching the limit.

    Read the article

  • No web browsers open on Windows XP

    - by Carlos Torres
    I'm having a weird problem here. I upgraded a Windows XP computer from IE6 to IE8 yesterday and everything seemed to work normally until today. Now I can't open any browser on this computer. The computer had Google Chrome installed and it suddenly disappeared, I installed it again and now it dowsn't open either. I also installed Firefox and the same thing happened. The computer had no anti virus, I installed Ad-Aware, run a full scan and it detected some malware, but browsers are still not working Any ideas?

    Read the article

  • Environment variables in bash_profile or bashrc?

    - by Viriato
    I have found this question [blog]: Difference between .bashrc and .bash_profile very useful but after seeing the most voted answer (very good by the way) I have further questions. Towards the end of the most voted, correct answer I see the statement as follows : Note that you may see here and there recommendations to either put environment variable definitions in ~/.bashrc or always launch login shells in terminals. Both are bad ideas. Why is it a bad idea (I am not trying to fight, I just want to understand)? If I want to set an environment variable and add it to the PATH (for example JAVA_HOME) where it would be the best place to put the export entry? in ~/.bash_profile or ~/.bashrc? If the answer to question number 2 is ~/.bash_profile, then I have two further questions: 3.1. What would you put under ~/.bashrc? only aliases? 3.2. In a non-login shell, I believe the ~/.bash_profile is not being "picked up". If the export of JAVA_HOME entry was in bash_profile would I be able to execute javac & java commands? Would it find them on the PATH? Is that the reason why some posts and forums suggest setting JAVA_HOME and alike to ~/.bashrc? Thanks in advance.

    Read the article

  • How can I stop Ubuntu from playing audio from 2 interfaces at the same time?

    - by Solignis
    Hi there, I just loaded Ubuntu 10.10 Maverick on my home machine. The machine is running a Core2Duo E6750 on an MSI motherboard with an Nvidia GTX260-OC Graphics card. The problem I am having as stated in the title is for some reason Ubuntu is playing audio through my headphone coming out from the computer and it is also playing the audio at the exact same time through the HDMI connection coming out of the graphics card, it has a plug to allow this. What is going on, I have never seen this before. Most importantly of all can it be fixed so that I can sepertate the 2 interfaces, the one is a standard PC audio IO and the HDMI one is connected through the mobo's internal SPDIF. More information can be provided if required.

    Read the article

  • Cleaning up temp files in Mac OS X

    - by deddebme
    I was a Windows person for more than 10 years. Around 4 months ago, I switched to Mac, and I have never looked back. But there is one thing that bothers me, which is my Mac partition volume is losing space slowly and gradually. I am pretty sure there are a lot of orphaned temporary files laying around in the volume. I know where to find the obsoleted temp files in my Windows partition, how about in Mac OSX?

    Read the article

  • How to repair Mac OSX without reinstalling?

    - by RahulVyas
    I have an intel PC. I have installed iDeneb Mac OS X in my pc. It's running fine. After that I thought to install Snow Leopard for running the iPad SDK. So I bought a retail Snow Leopard and boot it with Rebel EFI boot loader. When I was installing Snow Leopard, at the end of installation, setup gives an error. So I restarted my PC and boot with Rebel and I saw that mac was there so I boot that into safe mode and Mac OSX runs. After that I install iPad SDK. But when I try to create an application, XCode is not responsive. It hangs when I choose new project, give it a name and save it on disk. After just as I gave name and choose save it hangs. Is there any way i can repair my Mac OSX without reinstalling? I have also unable to boot into normal mode and also without Rebel CD. So I want to boot without Rebel CD and also want to run iPad SDK so please help me to solve this problem.

    Read the article

  • mplayer audio desync

    - by geek
    I have and avi file and an ac3 file that contains an alternate audio stream. I run mplayer like: mplayer -audiofile foo.ac3 bar.avi mplayer takes the audio stream from the ac3 file as expected, but when I try to scroll the video using arrows or pgup/pgdown keys, the audio gets desynced: mplayer just starts playing the audio stream from the beginning. Do I have to pass any additional command line arguments in order to make it scroll properly without desyncing audio?

    Read the article

  • Multiple cable adapter setup not working - VGA to smartphone. All cables tested and work

    - by Christopher Rucinski
    Issue Pictured overhead projector setup does not work. #1 - #2 - #3 - Phone. All cables are tested and work! The issue is the HDMI connection between cable #2 and #3. With all other cables, the screen will automatically be displayed onto the projector screen. No extra work needed. With the pictured setup, the smartphone screen is not displayed onto the projector screen. What is the issue with the HDMI connection?? Background We recently had to do presentations at work (school), but the administration only provided VGA means of hooking up to it. Mostly likely reason probably dealt with cost. Anyways, there are several teachers that have brand new Samsung Series 9 ultrabooks (or similar). You know, the ones without VGA support. So I bought an adapter for those ultrabooks. Cable #5 in the picture below. However, both my coworker and I have been wanting to just display our phone screens on the projector. This I knew would require some extra work. What I have VGA cable to projector (cables go through the wall) For laptops HDMI to VGA cable For laptops MHL adapter For 11-pin microUSB phones microHDMI to VGA cable For ultrabooks 11-pin to 5-pin microUSB adapter For older 5-pin microUSB phones) Equipment Projectors 1 projector with VGA and HDMI input (issue is coworkers forget to switch sources) 1 projector with VGA only input Laptops 2 new Samsung ultrabooks w/o VGA or HDMI support 1 ultrabook with VGA and HDMI support several other laptops with at least VGA support 1 tablet with 11-pin microUSB at least 1 new phone with 11-pin microUSB at least 1 old phone with 5-pin microUSB Tested VGA cable (#1) to laptop Good VGA cable (#1) to HDMI adapter (#2) to laptop Good VGA cable (#1) to microHDMI adapter (#5) to laptop Good Projector to HDMI cable (not shown) to MHL adapter (#3) to Galaxy Note 3 smartphone Good VGA cable (#1) to HDMI adapter (#2) to MHL adapter (#3) to Galaxy Note 3 smartphone Does not work!! Extra Notes The 11-pin MHL adapter will not fit inside the 11-pin to 5-pin microUSB adapter so older phones can be displayed on the screen.

    Read the article

  • Disable some extra keys on keyboard in windows

    - by user1649054
    I have a keyboard with some types of extra keys, such as multimedia (play, pause, stop ,..), turn off, and etc. some times it's annoying with a "exit button" just right beside arrows that accidentally presses, and programs gonna close, and some other similar problems. I'm wondering is there any solution to disable, or change the functionality of these types of keyboard keys in Windows (win7)? Cheers

    Read the article

  • Switching BIOS SATA RAID/AHCI setting causes BSOD at Windows Start - Why?

    - by thephatp
    I just changed my disk setup from: 1 SATA HDD Primary OS Disk 2x SATA HDD Backup Disks in RAID 1 TO: 1 SATA SSD Primary OS Disk 1 SATA HDD Backup Disk [No RAID] Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo. These are my steps: Settings Integrated Peripherals "SATA RAID/AHCI Mode" = RAID -- Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome Next Step: Launch BIOS settings Integrated Peripherals "Onboard SATA/IDE Ctrl Mode" = RAID -- Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues. What am I missing? Why can't I set it to AHCI mode without BSODs?

    Read the article

  • Removing Little Snitch completely (Mac OS X Snow Leopard)

    - by Mathias Bynens
    I uninstalled Little Snitch months ago. Or so, I thought. When opening Console.app, I see something like this: Here’s a textual log: 21/11/09 22:05:31 com.apple.launchd[1] (at.obdev.littlesnitchd[10045]) Exited with exit code: 1 21/11/09 22:05:31 com.apple.launchd[1] (at.obdev.littlesnitchd) Throttling respawn: Will start in 10 seconds 21/11/09 22:05:33 Little Snitch UIAgent[10046] 2.0.4.385: m65968c1c 21/11/09 22:05:33 Little Snitch UIAgent[10046] 2.0.4.385: m579328b9 21/11/09 22:05:33 Little Snitch UIAgent[10046] 2.0.4.385: m41531ded 21/11/09 22:05:33 com.apple.launchd.peruser.501[170] (at.obdev.LittleSnitchUIAgent) Throttling respawn: Will start in 10 seconds 21/11/09 22:05:41 com.apple.launchd[1] (at.obdev.littlesnitchd[10049]) Exited with exit code: 1 21/11/09 22:05:41 com.apple.launchd[1] (at.obdev.littlesnitchd) Throttling respawn: Will start in 10 seconds 21/11/09 22:05:43 Little Snitch UIAgent[10050] 2.0.4.385: m65968c1c 21/11/09 22:05:43 Little Snitch UIAgent[10050] 2.0.4.385: m579328b9 21/11/09 22:05:43 Little Snitch UIAgent[10050] 2.0.4.385: m41531ded 21/11/09 22:05:43 com.apple.launchd.peruser.501[170] (at.obdev.LittleSnitchUIAgent) Throttling respawn: Will start in 10 seconds Spotlight searches for ‘little snitch’ or ‘littlesnitch’ yield no results. Yet, it seems like I didn’t get rid of Little Snitch entirely, since it’s still using up my CPU. Any ideas?

    Read the article

  • How to access shared folder between CentOS 6 and WinXP under vmware player 4

    - by q0987
    Based on Sharing Files between CentOS 6 and Windows Systems with Samba I am able to follow until section of "Accessing Samba Shares". however, my system is WinXP and I don't see CentOS 6 icon at all. In my left panel of explorer, I only see "My network places". For section "Accessing Windows Shares from CentOS 6", after I click workgroup, I only see a localhost icon. When I click this icon, I see "unable to mount location" error from CentOS. BTW: I have set the shared folder within WMWare Player 6.0. Whatelse I have to do in order to make the shared folder work? Thank you

    Read the article

  • Networking "chokes" on Windows 7 64 bit

    - by Rohit Nair
    I've been having this problem for some months now, and I have been unable to figure out a solution, or even the cause. At random points throughout the day, my internet connectivity "freezes". I don't get disconnected from my local wireless network. My router doesn't get disconnected from the world. However, for some reason, my computer stops receiving packets. If I'm playing an MMO ( World of Warcraft, in this case, but it has happened with Eve Online as well ) all activity just freezes. If I try to browse, Opera, Firefox and IE all stall at "Waiting for google.com..." or whatever the hostname may be. Inspection with a packet sniffer seems to reveal that there are no incoming packets. Here's the interesting part. Disconnecting from my wireless network and reconnecting fixes the issue. Obviously this led me to conclude that it was a problem with my router or wireless card. However, I have tweaked all the settings on my router that I could think of, including things like QoS, AP Isolation, etc. with no change. My wireless card doesn't really have that many options, and I have uninstalled and reinstalled drivers a few times without any change. Windows Firewall on/off doesn't make a difference. Anyone have any suggestions for debugging this? It's becoming an annoyance.

    Read the article

  • Passwords and Keys in Linux

    - by PeanutsMonkey
    In a fit of desperation when I had my wireless connection die on me, I thought it was a problem with the key I had created at the start when I initially configured the wireless connection and hence deleted it. The option to create the key had presented itself when I created the wireless connection. It no longer asks me to. Now I am back online, do I have re-create the password and key I had before? If so, what do I choose and why? The options I have are as follows; PGP Stored password Password keyring Secure shell key The first and last option seem to be obvious and I have no idea about the differences between the second and third options. Why do I need a stored password or password keyring in all scenarios and not just the wireless issue I ran into? EDIT 0 Further to Belisama's comment, I have amended my question. EDIT 1 As requested, I have attached a screenshot

    Read the article

  • New drivers, now switchable graphics won't work

    - by Glenn Andersson
    I have an ASUS notebook with dual AMD/ATI graphic cards. Before I've been able to switch individual programs in the Vision Control Center from high performance to energy saving and the other way around. But today I updated the drivers using the AMD Mobility to version 12.10, and now every time I try to configure switchable graphics it either shuts down or does not come up at all. I have a new menu item called Global Switchable Graphics settings though. Any thoughts on this?

    Read the article

  • Free web app that can be used to keep track of loans made to people (like Mint)

    - by ShaChris23
    Is there a web app that is: Free Behaves like Mint But allows me to keep track of money I loan or owe other people? I should be able to setup an "account" for each person that I loan out to, and be able to "check off" when the person returns me the money, etc. I should also be able to add notes to each transaction to help me remember what it was for. Would be even nicer if I can add transactions via text messaging, email, etc.

    Read the article

  • HD Video Capture Card w/ Good API?

    - by Sheep Slapper
    Does anyone here know of a good HD video capture card that has a good (comprehensive) API? I administer a few servers that do some video encoding right now, but when we make the switch to HD cameras, they won't be sufficient. In addition to this, the servers we have now are black boxes, closed to me except to start/stop the video capture device. I'd like to be able to roll my own, so we can better integrate it with our existing systems, but I know almost nothing about what kind of HD capture cards are out there, and if I can avoid spending money just to test their APIs that would rock. So does anyone have any experience with this? All our other software is in C#, and I'd like to set up the new servers with web interfaces to start/stop the capture (also in C#, using .NET 3.5 probably). I'm not sure how language specific these APIs would be, but that's what I'm working with just as a reference point. I appreciate any help the community can give!

    Read the article

  • alternative filesystems for SSD

    - by freedrull
    I am tired of watching fsck check my filesystem when my eeepc 901 shuts down abruptly due to a crash. I know that with a journaling filesystem, I won't have to wait for a check. However, I am well aware of the poor I/O performance of the SSD, so I can imagine using a journaling filesystem being even more frustrating, since there will be constant writes to the journal? I will buy a new laptop without such a crummy ssd someday but, is there anything I can do now, on the software side of things?

    Read the article

  • HP Omni 27-1027c AIO...Upgradeable?

    - by Bobo
    I just bought an HP Omni 27 1057c from Sams Club. I like it a lot, but I want more performance. discovered that the integrated Intel HD 2500 graphics is almost useless for most games. I found a website that says it can be upgraded at http://www.pcmag.com/article2/0,2817,2398314,00.asp. The computers specs can be found at Sams Club website or at HP website HP Product Specs. So what do you think? Can I upgrade Motherboard and Video Card?

    Read the article

< Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >