Search Results

Search found 19471 results on 779 pages for 'network troubleshooting'.

Page 679/779 | < Previous Page | 675 676 677 678 679 680 681 682 683 684 685 686  | Next Page >

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • OpenSwan (IPSEC) on Fedora 13 with Snow Leopard as a client

    - by sicn
    I recently installed OpenSwan on my Fedora 13 machine. I want to use it to connect with Mac OS X with L2TP over IPSEC, unfortunately I am already stuck on the IPSEC-negotation part. My server is running behind a NATted firewall so my external IP differs from the server's IP. The server has a fixed IP on the network and the same is almost always valid for the clients (they are usually behind a NATted firewall). I installed OpenSwan on Fedora 13 and have following configuration: config setup protostack=netkey nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=my.servers.external.ip leftprotoport=17/1701 right=%any rightprotoport=17/0 IPSEC starts fine and listens to UDP 500 and 4500. These two ports are opened in the firewall and are forwarded fine to the server. In my /etc/ipsec.secrets file I have my.servers.external.ip %any: "LongAndDifficultPassword" And finally in my sysctl.conf (the redirect-entries are there because OpenSwan was strongly protesting about send/accept_redirects being active) I have net.ipv4.ip_forward = 1 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.all.accept_redirects = 0 Running "ipsec verify" gives me "all greens" (except Opportunistic Encryption Support, which is DISABLED), however, when trying to connect my Mac gives me following in the logs: Nov 1 19:30:28 macbook pppd[4904]: pppd 2.4.2 (Apple version 412.3) started by user, uid 1011 Nov 1 19:30:28 macbook pppd[4904]: L2TP connecting to server 'my.servers.ip.address' (my.servers.ip.address)... Nov 1 19:30:28 macbook pppd[4904]: IPSec connection started Nov 1 19:30:28 macbook racoon[4905]: Connecting. Nov 1 19:30:28 macbook racoon[4905]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Nov 1 19:30:31 macbook racoon[4905]: IKE Packet: transmit success. (Phase1 Retransmit). Nov 1 19:30:38: --- last message repeated 2 times --- Nov 1 19:30:38 macbook pppd[4904]: IPSec connection failed Any ideas at all?

    Read the article

  • Gnome 3 gdm fails to start after preupgrade from fedora 14 to 15

    - by digital illusion
    I'm not able to boot fedora 15 in runlevel 5. After all services start, when the login screen should appear, gdm just show a mouse waiting cursor and keeps restarting itself. From /var/log/gdm/\:0-greeter.log Gtk-Message: Failed to load module "pk-gtk-module" /usr/bin/gnome-session: symbol lookup error: /usr/lib/gtk-3.0/modules/libatk-bridge.so: undefined symbol: atk_plug_get_type /usr/libexec/gnome-setting-daemon: symbol lookup error: /usr/lib/gtk-3.0modules/libatk-bridge.so: undefined symbol: atk_plug_get_type Where should atk_plug_get_type be defined? Edit: Here a better description of the error (system-config-network-gui:2643): Gnome-WARNING **: Accessibility: failed to find module 'libgail-gnome' which is needed to make this application accessible /usr/bin/python: symbol lookup error: /usr/lib/gtk-2.0/modules/libatk-bridge.so: undefined symbol: atk_plug_get_type Why there are still references to gtk2? Did preupgrade fail? Attaching upgrade log... it seems gdm was not added, but it is present in the users and groups list. May 26 11:25:52 sysimage sendmail[1076]: alias database /etc/aliases rebuilt by root May 26 11:25:52 sysimage sendmail[1076]: /etc/aliases: 77 aliases, longest 23 bytes, 795 bytes total May 26 11:46:09 sysimage useradd[1793]: failed adding user 'dbus', data deleted May 26 11:53:37 sysimage systemd-machine-id-setup[2443]: Initializing machine ID from D-Bus machine ID. May 26 11:55:28 sysimage useradd[2835]: failed adding user 'apache', data deleted May 26 11:55:38 sysimage useradd[2842]: failed adding user 'haldaemon', data deleted May 26 11:55:43 sysimage useradd[2848]: failed adding user 'smolt', data deleted May 26 11:57:32 sysimage sendmail[3032]: alias database /etc/aliases rebuilt by root May 26 11:57:32 sysimage sendmail[3032]: /etc/aliases: 77 aliases, longest 23 bytes, 795 bytes total May 26 11:57:46 sysimage groupadd[3066]: group added to /etc/group: name=cgred, GID=482 May 26 11:57:47 sysimage groupadd[3066]: group added to /etc/gshadow: name=cgred May 26 11:57:47 sysimage groupadd[3066]: new group: name=cgred, GID=482 May 26 11:58:42 sysimage useradd[3086]: failed adding user 'ntp', data deleted May 26 12:00:13 sysimage dbus: avc: received policyload notice (seqno=2) May 26 12:15:08 sysimage useradd[4950]: failed adding user 'gdm', data deleted May 26 12:24:39 sysimage dbus: avc: received policyload notice (seqno=3) May 26 12:25:24 sysimage useradd[5522]: failed adding user 'mysql', data deleted May 26 12:25:37 sysimage useradd[5533]: failed adding user 'rpcuser', data deleted May 26 12:26:31 sysimage useradd[5592]: failed adding user 'tcpdump', data deleted Any suggestions before I revert installation to F14?

    Read the article

  • Use Mac OS X Server As Development Environment

    - by macinjosh
    I've installed Mac OS X Server 10.6.3 on my laptop to use as my normal OS. I do a lot of web development and thought it would be handy to run OS X Server so I could more easily manage my local development environment (Apache Virtual Hosts, Hostnames for each local site, etc). I'm really enjoying the new setup except for one problem. DNS. My ideal situation would be to add a site (some-site.local) in the Web Service and then go to the DNS Service and add a primary record for the new site. I actually got this working at one point but after a reboot it stopped working! The records look the same as they did before the reboot but the site doesn't come up in Safari. Here is a list of my needs: Need to be able to add new domains at a whim Domains always map to a site on the same box's Web Service Local & External IPs often change It would nice if it worked on any network (i.e. WiFi at the airport or coffee shop) Sites only need to be accessible locally Configuration should stay put even after rebooting I've done some googling and used this as a bit of guide. In the past I've used MAMP and then just a local Apache/PHP/MySQL install with a manually managed hosts file. I'd rather not go back.

    Read the article

  • Reduce power consumption of gaming computer while idle

    - by White Phoenix
    This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

    Read the article

  • Sniffing at work- How to detect

    - by coffeeaddict
    Because of the place I work has some real issues (people) especially in IT and the owner, I wonder if we are being sniffed. Is there any way to tell if on a Vista 64-bit machine: 1) In system logs some identification that would tell me that someone might log into my PC such as an Admin 2) Something in the logs that would give me a flag about maybe I'm being monitored some other way? 3) How can I be sure that my gmail, hotmail, and chat is not being sniffed. I know there are things like Simp, etc. I'm talking about specific hidden system signs either in registry or logs. Obviously I'm not going to raise any suspicion by me asking our network admin. I don't trust anyone at this company. is there a good way to basically monitor for this as an end user? Could someone log in and basically watch me work and if so, would there be any goodies left behind for me to find out if this has happened other than visual signs which would not be present...maybe some running processes?

    Read the article

  • List symlinks in specific relative directories

    - by Clinton Blackmore
    I have a server that shares out user home folders over the network. Each user has a Cache folder. Sometimes a symlink is used to redirect this folder to the hard drive of whichever machine they are using (and sometimes that doesn't work and they have a broken symlink [which is a matter for another day].) I'm trying to find out which users have symlinks and which don't. Within the shared folder, to get to the Cache folder you would substitute folders like so: $GRADE/$USERNAME/Library/Caches Right now I'm searching to see which users have symlinks and which do not. I've come up with: cd /path/to/shared/home/folders sudo find . -name "Caches" -exec ls -ld {} \; and get results like this: lrwxr-xr-x@ 1 name0 ES_Students 27 Jan 18 11:05 ./CES_Grade_03/name0/Library/Caches -> /tmp/name0/Library/Caches drwx------ 11 name1 ES_Students 374 Dec 8 15:44 ./CES_Grade_03/name1/Library/Caches lrwxr-xr-x@ 1 name2 ES_Students 27 Feb 23 14:27 ./CES_Grade_03/name2/Library/Caches -> /tmp/name2/Library/Caches drwx------ 17 name3 ES_Students 578 Jan 25 11:13 ./CES_Grade_03/name3/Library/Caches drwx------ 12 name4 ES_Students 408 Mar 22 13:09 ./CES_Grade_03/name4/Library/Caches but it nags at me that there must be a better way. Yes, it is good enough, and a one-off task, but I want to know how to do it right! Surely, I should be able to do something like: cd /path/to/shared/home/folders sudo ls -ld **/**/Library/Caches I'm afraid that I don't know the proper syntax or if there is a recursive folder-replacing wildcard format in bash, and my google-fu failed me. So, how do I properly formulate the search?

    Read the article

  • Apache mod_proxy with SSL not redirecting

    - by simonszu
    I have a custom server running behind an apache reverse proxy. Since the custom server can only handle HTTP traffic, i am trying to use apache for wrapping proper SSL around it, and for some kind of HTTP authentication. So i enabled mod_proxy and mod_ssl and modified sites-available/default-ssl. The config is as following: <Location /server> order deny,allow allow from all AuthType Basic AuthName "Please log in" AuthUserFile /etc/apache2/htpasswd Require valid-user ProxyPass http://192.168.1.102:8181/server ProxyPassReverse http://192.168.1.102:8181/server </Location> The custom server is accessible from the internal network via the location specified in the ProxyPass directive. However, when the proxy is accessed from the outside, it presents the login prompt, and after successfully authenticated, i get a blank page with the words The resource can be found at http://192.168.1.102:8181/server. When i type the external URL again in an already authenticated browser instance, i am properly redirected to the server frontend. The access.log is full of entrys stating that my browser does successful GET requests, and the proxy is happily serving the /server ressource. However, the ressource isn't containing the server's frontend, but this blank page with these words on it.

    Read the article

  • Windows 7 Folder Redirection (GPO)

    - by Kev
    I have been fighting this issue for a day or two now, so I am looking for some insight. I am taking over admin duties in a domain of 800 users, and the previous admins really did not employ much of any GPO settings for the clients of the Domain. In each site, there is a location on the file server where "Home" folders were manually created. EX: \server\home\enduser Whenever a user got a machine, the admin would manually right-click on the "My Documents" folder and manually enter the path to the home folder. We are planning to start putting Windows 7 machines on the Network, and I am wanting to automate as much as I can, everything that was not done in the past. Since everyone has exising "Home" folders I have been fighting and trying to get Folder Redirection to work with a new Windows 7 machine (In a Test OU). I am getting all kinds of errors and I can't get the Windows 7 "Documents" folder to redirect to the users EXISTING home folders. As I stated earlier, all of the Home folders were (and still are) manually created on the File Server and are set with the following Security permissions - Domain Admins - Full Control euser (end user) - Modify (Everything but Full) Can someone point me in the right direction on the proper setting to put in the Folder Redirection GPO to get this to work with the Existing Home folders.

    Read the article

  • A fatal exception 0E occured at 0028:xxxxxx in VxD IOS(01)

    - by winlin
    I get a blue screen of death in my windows 98 machine every time I boot it. I can't reach to my desktop. The error is like this: A fatal exception 0E occured at 0028:C003CC2F in VxD IOS(01) + 0000156B This was called from 0028:C0082E60 in VxD VKD(01) + 000001D0 I have to then give it a three finger salute to restart the system. There is no other way to shut down the system at this point except pressing the CPU power button. What could be the problem? My windows system.ini is: [boot] oemfonts.fon=vgaoem.fon shell=Explorer.exe system.drv=system.drv drivers=mmsystem.dll power.drv user.exe=user.exe gdi.exe=gdi.exe sound.drv=mmsound.drv dibeng.drv=dibeng.dll comm.drv=comm.drv mouse.drv=mouse.drv keyboard.drv=keyboard.drv *DisplayFallback=0 fonts.fon=vgasys.fon fixedfon.fon=vgafix.fon 386Grabber=vgafull.3gr display.drv=pnpdrvr.drv [keyboard] keyboard.dll= oemansi.bin= subtype= type=4 [boot.description] system.drv=Standard PC mouse.drv=Standard mouse keyboard.typ=Standard 101/102-Key or Microsoft Natural Keyboard aspect=100,96,96 display.drv=Standard PCI Graphics Adapter (VGA) [386Enh] ;device=tddebug.386 ;device=D:\TC\TASM\BIN\WINDPMI.386 ebios=*ebios woafont=dosapp.fon mouse=*vmouse, msmouse.vxd device=*dynapage device=*vcd device=*vpd device=*int13 keyboard=*vkd display=*vdd,*vflatd ConservativeSwapfileUsage=0 Paging=on [NonWindowsApp] TTInitialSizes=4 5 6 7 8 9 10 11 12 13 14 15 16 18 20 22 [power.drv] [drivers] wavemapper=*.drv MSACM.imaadpcm=*.acm ;msvideo.STV680=STV680sg.drv midi=mmsystem.dll wave=mmsystem.dll MSACM.msadpcm=*.acm [iccvid.drv] [mciseq.drv] [mci] cdaudio=mcicda.drv sequencer=mciseq.drv waveaudio=mciwave.drv avivideo=mciavi.drv videodisc=mcipionr.drv vcr=mcivisca.drv MPEGVideo=mciqtz.drv MPEGVideo2=mciqtz.drv [vcache] [MSNP32] [DISPLAY] BusThrottle=1 [network] SSID=1438661605 [vicax] msacm711=74603 msacm811=148933 msacm911=42405 [Sessew] VideoManufacturer=Standard VGA VideoBoard=Standard Display Adapter (VGA) MouseType=0 VidType=0 Mono=0 Ddraw=1 [drivers32] msacm.lhacm=lhacm.acm VIDC.IV50=ir50_32.dll msacm.iac2=C:\WINDOWS\SYSTEM\IAC25_32.AX VIDC.YUY2=msyuv.dll VIDC.UYVY=msyuv.dll VIDC.YVYU=msyuv.dll msacm.msaudio1=msaud32.acm msacm.vorbis=vorbis.acm msacm.l3acm=C:\WINDOWS\SYSTEM\L3CODECA.ACM msacm.sl_anet=sl_anet.acm VIDC.TSCC=tsccvid.dll VIDC.IV41=IR41_32.AX vidc.mpg4=mpg4c32.dll vidc.mp43=mpg4c32.dll msacm.voxacm160=vct3216.acm MSACM.msadpcm=msadp32.acm [TTFontDimenCache] 0 4=2 4 0 5=3 5 0 6=4 6 0 7=4 7 0 8=5 8 0 9=5 9 0 10=6 10 0 11=7 11 0 12=7 12 0 13=8 13 0 14=8 14 0 15=9 15 0 16=10 16 0 18=11 18 0 20=12 20 0 22=13 22

    Read the article

  • How do I connect a 2008 server to a 2003 server active directory?

    - by Matt
    Our DC is running Windows Server 2003. I've just set up Windows Server 2008 and have terminal server running on it. When setting the terminal server permissions, it was able to allow a group name that was read from the domain. In the DC the new terminal server shows up as a computer in the domain. I can also log in as a user within the domain even though that user doesn't exist locally on the new server. However, when I go to set sharing permissions on the new machine it doesn't show my domain as a location. Instead it is only looking at location "machinename" and not allowing domain to be seen or added. Is there something I'm missing? Ok, lots of errors in the event log. We have this: The winlogon notification subscriber is taking long time to handle the notification event (Logon). Followed by this: The winlogon notification subscriber took 121 second(s) to handle the notification event (Logon). Followed by: The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has succesfully processed. If you do not see a success message for several hours, then contact your administrator. I think this might be the same problem I'm having http://serverfault.com/questions/24420/primary-domain-controller-slow Solved. The issue was that I had changed from DHCP to static and put the wrong DNS server IP in. i.e. firewall instead of DC/DNS server.

    Read the article

  • IIS 6 + ASP.NET web service - DW20 and stackoverflow exception

    - by pcampbell
    Consider an ASP.NET SOAP web service that starts up fine, but craters hard when receiving its first hit. Please note that this is deployment works in the Test environment, but not in the PreProd environment. Both are Windows 2003 SP3 + IIS 6 + ASP.NET 3.5. All up-to-date. The behaviour that we're seeing is: restart the site & app pool the app pool is configured to run under Network Service. browsing to the .asmx and .wsdl responds normally, as expected. send a normal well-formed SOAP request / normal payload to the web service 100% CPU usage after 5 seconds, the page request / site returns "Service Unavailable" no entry is created in the IIS log file (i.e. c:\windows\system32\logfiles\W3C-foo) the app pool ends up being stopped The processes that hit the CPU hard are dw20.exe. I am unsure why Dr Watson is involved here. Event Log shows an ASP.NET Runtime error: Task Manager: Event log text: EventType clr20r3, P1 w3wp.exe, P2 6.0.3790.3959, P3 45d6968e, P4 errormanagement, P5 1.0.0.0, P6 4b86a13f, P7 24, P8 0, P9 system.stackoverflowexception, P10 NIL. Questions Any thoughts on what this system.stackoverflow exception might be? Given that the code is the same between environments, might it be a payload problem? Could it be a configuration issue? You can see the name of my .NET assembly there in the exception message: "ErrorManagement"

    Read the article

  • Talk on multiple IRC channels at once?

    - by TwoPixelGrid
    I seem to remember, back in '91 or so, that the console-based IRCII implemention on the Solaris box that first got me on the net would let me /Join multiple channels on a given network such that, as new channels were joined, they would start scrolling to the single console view. Let's call it the 'interleaved conversation' chat paradigm. Am I rembering this correctly? More importantly, is there a modern way of doing this in any of the GUI-based clients? I'm surprised this isn't a common desire/feature because I think it would greatly improve the experience, especially on channels with high SNR. For example, If I'm working on a project I may connect to Freenode and join : #Qt,#OpenGL,#C++. As it is now, with mIRC,Xchat, I have to manually flip between pages just to see whats being said and to reply. What I envision would go more like this (using only 2 channels for simplicity) /join #QT #OpenGL < [QT] QtChannelUser: Hello TwoPixelGrid. < [OpenGL] OpenGLChannelUser: Hi there TwoPixelGrid. @QT: Hi QtChannelUser @OpenGL: Hello againOpenGLChannelUser And this message is going out to all my channels. Do I have to write a new client or is this already out there?

    Read the article

  • CentOS tftp server is broken

    - by Mike Pennington
    I'm trying to run tftpd from xinetd on CentOS 6; however, I can only tftp from localhost. I have a file in /opt/tftpboot/fw.test.conf that I can retrieve if I tftp to localhost: [mpenning@localhost ~]$ tftp localhost tftp> get fw.test.conf tftp> quit [mpenning@localhost ~]$ ls fw.test.conf [mpenning@localhost ~]$ However, I cannot receive this file if I tftp to eth1 on this server (the address on eth1 is 172.16.1.4). [mpenning@localhost ~]$ sudo tshark -i eth1 udp and host 172.16.1.5 Running as user "root" and group "root". This could be dangerous. Capturing on eth1 0.000000 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 5.000133 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 10.000184 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 15.000297 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 20.000331 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 ^C5 packets captured [mpenning@localhost ~]$ I have the following xinetd configuration: [root@localhost mpenning]# cat /etc/xinetd.d/tftp # default: off # description: The tftp server serves files using the trivial file transfer \ # protocol. The tftp protocol is often used to boot diskless \ # workstations, download configuration files to network-aware printers, \ # and to start the installation process for some operating systems. service tftp { socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -s /opt/tftpboot disable = no per_source = 11 cps = 100 2 flags = IPv4 } [root@localhost mpenning]#

    Read the article

  • Trouble with IIS SMTP relaying to Gmail

    - by saille
    I appreciate that similar questions have been asked about how to setup SMTP relaying with IIS's virtual SMTP server. However I'm still completely stumped on this problem. Here's the setup: IIS 6.0 SMTP server running on Win2k3 box with a NAT'ed IP. Company uses Gmail for all email services. An app on the box needs to send email, so normally we'd just set the app up to talk to smtp.gmail.com directly, but this app doesn't support TLS. Easy, we just setup a local SMTP relay right? So I thought. What we have done so far: Setup IIS SMTP server to relay to smtp.gmail.com, as per these excellent instructions: http://fmuntean.wordpress.com/2008/10/26/how-to-configure-iis-smtp-server-to-forward-emails-using-a-gmail-account/ The local SMTP relay allows anonymous access. Both the local IP and the loopback IP have been explicitly allowed in the Connection and Relay dialogs. Tried sending email from 2 different apps via the local SMTP server, but failed (the emails end up in the Queue folder, but never get sent). The IIS logs show the conversation with the local app, but zero conversation happening with smtp.gmail.com. The port used by gmail is open outbound, and indeed the apps we have that support TLS can send email directly via smtp.gmail.com, so there is no problem with the network. At this point I changed the smtp settings in IIS SMTP server to use a different external SMTP server and hey-presto, the local apps can send email via local IIS SMTP relay. So smtp.gmail.com fails to work with our IIS SMTP relay, but another 3rd party SMTP service works fine. We need to use smtp.gmail.com, so how to troubleshoot this one?

    Read the article

  • samba "username map" stopped to work after upgrade to 3.6

    - by Kris_R
    It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems.

    Read the article

  • Throughput; capacity planning help for C10K like design

    - by z8000
    I am designing a network service in which clients connect and stay connected -- the model is not far off from IRC less the s2s connections. I could use some help understanding how to do capacity planning, in particular with the system resource costs associated with handling messages from/to clients. There's an article that tried to get 1 million clients connected to the same server [1]. Of course, most of these clients were completely idle in the test. If the clients sent a message every 5 seconds or so the system would surely be brought to its knees. But... How do you do less hand-waving and you know, measure such a breaking point? We're talking about messages being sent by a client over a TCP socket, into the kernel, and read by an application. The data is shuffled around in memory from one buffer to another. Do I need to consider memory throughput ("5 GT/s" [2], etc.)? I'm pretty sure I have the ability to measure the basic memory requirements due to TCP/IP buffers, expected bandwidth, and CPU resources required to process messages. I'm a little dim on what I'm calling "thoughput". Help! Also, does anyone really do this? Or, do most people sort of hand-wave and see what the real world offers, and then react appropriately? [1] http://www.metabrew.com/article/a-million-user-comet-application-with-mochiweb-part-3/ [2] http://en.wikipedia.org/wiki/GT/s

    Read the article

  • Stream video from a computer to a tablet

    - by NullOrEmpty
    I would like to watch presentations and college videos I have on my computer, from my tablet. There are almost a hundred of GB in videos, so I would like to watch them in streaming from my computer. My wife has also tons of videos so I have decided to do a kind of streaming local service to watch the videos from our tablets. I have found an article about how to do it with Internet Information Server, but the article is relaying in an application that is not free (Expression Encoder). Since this is for home fun, I am not willing to pay, so I would like to ask for some free encoder that can do the trick. I have no idea about streaming. Actually, I tried to hang the files directly on IIS, and the browser tried first to download some of them and some other (mp4?) got played badly, so I could not get a smooth video experience. What is missing? What is the deal with H.264 ? Can I roll with VC-1 and play videos in my Android tablet with streaming with an acceptable quality through my WLAN home network? Any better solution? Thanks.

    Read the article

  • Using 1and1.com Servers, SMTP Mail is Limited - Local XAMPP Server Works As Expected

    - by nicorellius
    I'm starting to not like 1and1.com that much. I've used them for years, but mainly for simple sites without much need for configuration. I know there are better hosting companies out and I may go seeking them. The problem here is that on my Local XAMPP server (sitting on a network with Comcast ISP), I have a PHP script that uses PEAR::Mail to send mail using MIME. The script works find locally with either smtp.1and1.com and corresponding credentials and smtp.gmail.com with corresponding credentials, using appropriate ports, etc. 1and1 tells me that I have to change the MX record on the domain where this script runs in order to make this work. This doesn't make sense to me. Now I'm pretty new to all this, but how is it that this is the case? Why can my local server work just fine, out of the box, but their servers not? I have asked them these questions, but they are very vague and I cannot get any good answers from them. Versions: PEAR Version: 1.5.0 PHP Version: 4.4.9 Zend Engine Version: 1.3.0 My apologies in advance for my ignorance. Thanks for the help in advance.

    Read the article

  • How have I locked me out from my Ubuntu VPS?

    - by Sanoj
    I have a Ubuntu Server as VPS (OpenVZ), and yesterday I installed php-fpm, but I guess something went wrong with the installation. Because since then I cannot log in to my server over SSH with PuTTY or using WinSCP. The message I get when connecting is Network error: Connection timed out. Immediately after the installation I was not able to use emacs either, I had to re-install it with apt-get install emacs. I have tried with clearing the firewall and rebooting the server from my web-based "control panel", but it doesn't help. The commands I used for installation of the PHP-fpm was from Installing PHP 5.3, Nginx And PHP-fpm On Ubuntu/Debian. And I guess it has something to do with these commands: cd /tmp wget http://us.archive.ubuntu.com/ubuntu/pool/main/k/krb5/libkrb53_1.6.dfsg.4~beta1-5ubuntu2_i386.deb wget http://us.archive.ubuntu.com/ubuntu/pool/main/i/icu/libicu38_3.8-6ubuntu0.2_i386.deb sudo dpkg -i *.deb sudo echo "deb http://php53.dotdeb.org stable all" >> /etc/apt/sources.list sudo apt-get update sudo apt-get install php5-cli php5-common php5-suhosin sudo apt-get install php5-fpm php5-cgi The web-sites that are hosted from my server works fine. Anyone that have the same experience or know how this could happen? I guess that I have to re-install Ubuntu Server from my "control panel" now, but I would like to avoid this situation in the future. Finally, I have backup on everything so nothing is lost if I have to re-install the machine.

    Read the article

  • I Made Wordpress Multisite. And Now Everything Doesn't Display Properly

    - by piratepartypumpkin
    I installed Ubuntu 10.4 then I installed Bitnami LAMP stack then I installed bitnami wordpress module then I tried to make the site into a multisite by following these instructions: http://wiki.bitnami.org/Applications/BitNami_WordPress_Multisite#How_to_add_several_WordPress_Multisite_blogs_with_different_domains.3f AND http://wiki.bitnami.org/Applications/BitNami_WordPress_Multisite I can elaborate if needed: I enabled multisite in my wp-config.php file. Then I created a network using the wordpress dashboard. I was given two blocks of text to copy and paste 1 block into my wp-config.php file and one into my .htaccess file. I did that and now I get this: When I go to my mywebsite.com I get this (this was there before I switched to multisite): If I go to mywebsite.com/wordpress I get this (this used to be a functioning wordpress theme): If I click on "My Blog" it redirects to 1mywebsite.com (where the "1" came from I have no idea) If I try to login by going to mywebsite.com/wordpress/wp-login I get this: and if I enter my user and password it redirects me to mywebsite.com/wp-login.php and gives me "Not Found" The requested URL /wp-login.php was not found on this server. NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /opt/lampstack-5.3.16-0/apps/wordpress ServerName mywebsite.com ServerAlias www.mywebsite.com </VirtualHost>

    Read the article

  • Outlook 2010 OSC with SharePoint 2010 documentation or help

    - by skypanther
    I'm looking for documentation or help to set up Outlook 2010's social connector to work with SharePoint 2010. I can't find much info other than some MS videos and blogs saying that it's possible. They say "we are already connected to SharePoint, so let's add in the XYZ connector..." but don't tell how they connected to SharePoint. Server A: Win2K8 x64, Exchange 2010 x64, domain controller Server B: Win2K8 x64, domain member, SQL Server 2008 R2, SharePoint 2010 Client: Win 7, domain member, with Office 2010 RTM (most every component installed, including the OSC) I've added my domain users to a group. In SharePoint, I granted that domain group permissions to access the site. As any of the domain users, I can use IE to log on the My Sites pages. From there, I can add lists, blog posts, status updates etc. In Outlook, I can add a SharePoint contact to my Contacts list. But, all I see in the People Pane is emails my users have exchanged. I don't see any of the other SharePoint status updates. When I try to use the "Add this person to a social network" link to connect them with my My Sites, the process fails. It doesn't give any sort of error message that helps me figure out why. Just a "Try Again" button that likewise fails. Any guides, links, suggestions? I'm pretty novice-level with SharePoint but mildly adept with the other technologies.

    Read the article

  • Migrating from tomcat to tc server - receiving java.sql.SQLException on startup

    - by user470184
    I'm receiving below error when I start tcServer. I do not receive this error on standalone version of tomcat. Is there extra config I need to add for tcServer ? WARNING: Unexpected exception resolving reference java.sql.SQLException: Io exception: The Network Adapter could not establish the connection at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255) at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387) at oracle.jdbc.driver.PhysicalConnection.(PhysicalConnection.java:441) at oracle.jdbc.driver.T4CConnection.(T4CConnection.java:165) at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35) at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801) at org.apache.tomcat.jdbc.pool.PooledConnection.connectUsingDriver(PooledConnection.java:277) at org.apache.tomcat.jdbc.pool.PooledConnection.connect(PooledConnection.java:182) at org.apache.tomcat.jdbc.pool.ConnectionPool.createConnection(ConnectionPool.java:699) at org.apache.tomcat.jdbc.pool.ConnectionPool.borrowConnection(ConnectionPool.java:631) at org.apache.tomcat.jdbc.pool.ConnectionPool.init(ConnectionPool.java:485) at org.apache.tomcat.jdbc.pool.ConnectionPool.(ConnectionPool.java:143) at org.apache.tomcat.jdbc.pool.DataSourceProxy.pCreatePool(DataSourceProxy.java:116) at org.apache.tomcat.jdbc.pool.DataSourceProxy.createPool(DataSourceProxy.java:103) at org.apache.tomcat.jdbc.pool.DataSourceFactory.createDataSource(DataSourceFactory.java:539) at org.apache.tomcat.jdbc.pool.DataSourceFactory.getObjectInstance(DataSourceFactory.java:237) at org.apache.naming.factory.ResourceFactory.getObjectInstance(ResourceFactory.java:140) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at org.apache.naming.NamingContext.lookup(NamingContext.java:793) at org.apache.naming.NamingContext.lookup(NamingContext.java:140) at org.apache.naming.NamingContext.lookup(NamingContext.java:781) at org.apache.naming.NamingContext.lookup(NamingContext.java:153) at org.apache.catalina.core.NamingContextListener.addResource(NamingContextListener.java:1028) at org.apache.catalina.core.NamingContextListener.createNamingContext(NamingContextListener.java:637) at org.apache.catalina.core.NamingContextListener.lifecycleEvent(NamingContextListener.java:238) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:142) at org.apache.catalina.core.StandardServer.start(StandardServer.java:747) at org.apache.catalina.startup.Catalina.start(Catalina.java:595) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414)

    Read the article

  • Webservice randomly dropping connections - possibly due to firewall nonevent data?

    - by adam
    I have a hosted webapp which requests data from a REST webservice in our office. Each page calls one (or several) webservices, which go from our host, via our firewall (a Watchguard Firebox) to a server in our office. All of a sudden, the app has dramatically slowed. We have determined that the webservice is timing out at random when called externally (it's fine when called within the office network). I'm pretty certain it's our connection which is dropping the webservice call, so I've written a quick php/curl script which calls the webservice over many iterations and shows the various timings. Below is an example output, showing both a failed and a successful call (with a 5 second timeout): http_code namelookup_time connect_time pretransfer_time starttransfer_time total_time 1 0 0.000096 0.0342 0.0000 0.0000 0.0342 2 200 0.000052 0.0332 0.1327 0.1751 0.1752 As per iteration #1 above, failed requests seem to be failing between connect and pretransfer. I'm not sure if this shows that the connection is successfully past the firewall, or could the firewall still cause an issue? Our firewall is showing a series of nondata event log messages for the relevant access rule. Our IT team tells me these are routine, although I can find no mention of these in Google. I'm not sure if this fits in between connect and pretransfer. Having elinated the webservice server (by testing internally) and the live webapp (by testing different code on different external servers, I am left suspecting the connection to the office. Could the firebox nondata events be causing a problem between connect and pretransfer?

    Read the article

  • Best way to 'harden' embedded ext4 file server against unexpected loss of power?

    - by Jeremy Friesner
    Hi all, First, a little background: my company makes an audio streaming device that is a headless, rack-mounted Linux box with a couple of SSDs attached. Each SSD is formatted with ext4. The users can connect to the system using Samba/CIFS to upload new audio files or access existing ones. There is also custom software for streaming out audio over the network. This is all fine. The only problem is that the users are audio people, not computer people, and see the system as a 'black box', not as a computer. Which means that at the end of the day, they aren't going to ssh in to the box and enter "/sbin/shutdown -h"; they are just going to cut power to the rack and leave, and expect things to still work properly the next day. Since ext4 has journalling, journal checksumming, etc, this mostly works. The only time it doesn't work is when someone uploads a new file via Samba and then cuts power to the system before the uploaded data has been fully flushed to the disk. In that case, they come in the next day and find that their new file has been truncated or is missing entirely, and are unhappy. My question is, what is the best way to avoid this problem? Is there a way to get smbd to call "sync" at the end of every upload? (Performance on uploads isn't so important, since they only happen occasionally). Or is there a way to tell ext4 to automatically flush within a few seconds of any change to a file? (Again, performance can be sacrificed for safety here) Should I set a particular write-ordering mode, activate barriers, etc?

    Read the article

< Previous Page | 675 676 677 678 679 680 681 682 683 684 685 686  | Next Page >