Search Results

Search found 47655 results on 1907 pages for 'system restore'.

Page 679/1907 | < Previous Page | 675 676 677 678 679 680 681 682 683 684 685 686  | Next Page >

• Wireless on ThinkPad Edge E420s

  - by user21820

  I have installed Kubuntu 11.04 (Natty) on my ThinkPad Edge E420 laptop. Unfortunately, the wireless is not working. I have got Windows 7 installed besides Kubuntu, and wireless is working with no problems there, so it has to be problem of the OS. What I tried: I installed the official driver from Realtek RLT8192CE. After reboot the wireless didn't work, but at least the system was able to detect that it is present in the system. However, after executing lscpi -v, under the card's details there was a line "Currently used driver" which said "r8169". Why is this? I did all of this according to a manual on http://www.php-architect.com/blog/2010/05/01/getting-wireless-to-work-on-lenovo-thinkpad-t400-with-ubuntu-10-4-lucid/. There a meany other similar ones, but don't work for me either. My questions are: 1) Is there any way to get this fixed? If yes, how to do so? 2) Do you think OpenSUSE (or any other distro) is better distribution concerning such hardware issues, so should I give it a try? If yes, which distro gives me the best chance?

  Read the article

• ubuntu 12.04 installer does not recognize drive partitions

  - by endless forms

  I recently purchased a new HP Pavilion HPE desktop running Windows 7. I am trying to install a dual-boot system with 12.04. However, when I run the LiveCD I only get as far as the "Install" window where you can select the partitions for your drives. On the bottom where it says "device for boot loader installation" I have "/dev/sda" and cannot select any other devices. All the options to change the drives are greyed out, most likely because there are no drives in the window. I partitioned my largest drive using the tools within Windows, then booted into the CD, but nothing shows up. I then used Gparted to change the new space from unallocated to an /ext2, and still nothing shows up. The installer does not recognize anything, but when I go into an Ubuntu session and use the disk utility manager I can see the partitions I made. Anything I do has to be done outside of the installer. I have no files on this new computer, so this is the perfect time to install a parallel OS. I would like avoid completely reinstalling Windows, however. I've been over the forums many times, but all the answers I've found have not worked for me. I also tried flagging the new, empty partition as boot, but that screwed Windows up. Also, the WUBI installer hits the same point and quits. I know that the disk itself is fine because I just made another dual boot system on a Gateway PC. This makes me think something within this computer is preventing the installer from "seeing" the drives. Any help would be much appreciated! Edit in response: The main part of the partitioning window shows no partitions, everything is blank. There is no way to add partitions, and all the buttons are useless. I've tried defragging my drive multiple times, and I also used the same disk to dual-boot another PC with no problems, so it's not the disk, it's definitely the computer.

  Read the article

• How can I test linkable/executable files that require re-hosting or retargeting?

  - by hagubear

  Due to data protection, I cannot discuss fine details of the work itself so apologies PROBLEM CASE Sometimes my software projects require merging/integration with third party (customer or other suppliers) software. these software are often in linkable executables or object code (requires that my source code is retargeted and linked with it). When I get the executables or object code, I cannot validate its operation fully without integrating it with my system. My initial idea is that executables are not meant to be unit tested, they are meant to be linkable with other system, but what is the guarantee that post-linkage and integration behaviour will be okay? There is also no sufficient documentation available (from the customer) to indicate how to go about integrating the executables or object files. I know this is philosophical question, but apparently not enough research could be found at this moment to conclude to a solution. I was hoping that people could help me go to the right direction by suggesting approaches. To start, I have found out that Avionics OEM software is often rehosted and retargeted by third parties e.g. simulator makers. I wonder how they test them. Surely, the source code will not be supplied due to IPR rgulations. UPDATE I have received reasonable and very useful suggestions regarding this area. My current struggle has shifted into testing 3rd party OBJECT code that needs to be linked with my own source code (retargeted) on my host machine. How can I even test object code? Surely, I need to link them first to even think about doing anything. Is it the post-link behaviour that needs to be determined and scripted (using perl,Tcl, etc.) so that inputs and outputs could be verified? No clue!! :( thanks,

  Read the article

• Why do I get a blinking screen when running lwjgl?

  - by SystemNetworks

  I didn't have any errors. But When I run my lwjgl game, it gives me a blinking screen. Here is the code: package L1F3; import org.lwjgl.opengl.Display; import org.lwjgl.opengl.DisplayMode; import org.lwjgl.LWJGLException; import static org.lwjgl.opengl.GL11.*; public class Main { public static void main(String[] args) { try { Display.setDisplayMode(new DisplayMode(640, 480)); Display.setTitle("A fresh display!"); Display.create(); } catch (LWJGLException e) { e.printStackTrace(); Display.destroy(); System.exit(1); } while(!Display.isCloseRequested()) { Display.update(); } Display.destroy(); System.exit(0); } } How do I stop the blinking screen? I was thinking its my framerate. I deleted Display.sync but it still gives me all white and black. Last time it didn't give me a blinking screen. EDIT When I remove Display.update() , it gives me a perfect screen, no blinking or no white. Will my game work without it? I can also close it perfectly.

  Read the article

• Calling a webservice via Javascript

  - by jeroenb

  If you want to consume a webservice, it's not allways necessary to do a postback. It's even not that hard! 1. Webservice You have to add the scriptservice attribute to the webservice. [System.Web.Script.Services.ScriptService]public class PersonsInCompany : System.Web.Services.WebService { Create a WebMethod [WebMethod] public Person GetPersonByFirstName(string name) { List<Person> personSelect = persons.Where(p => p.FirstName.ToLower().StartsWith(name.ToLower())).ToList(); if (personSelect.Count > 0) return personSelect.First(); else return null; } 2. webpage Add reference to your service to your scriptmanager <script type="text/javascript"> function GetPersonInCompany() { var val = document.getElementById("MainContent_TextBoxPersonName"); PersonsInCompany.GetPersonByFirstName(val.value, FinishCallback); } function FinishCallback(result) { document.getElementById("MainContent_LabelFirstName").innerHTML = result.FirstName; document.getElementById("MainContent_LabelName").innerHTML = result.Name; document.getElementById("MainContent_LabelAge").innerHTML = result.Age; document.getElementById("MainContent_LabelCompany").innerHTML = result.Company; } </script> Add some javascript, where you first call your webservice. Classname.Webmethod = PersonsInCompany.GetPersonByFirstName Add a callback to catch the result from the webservice. And use the result to update your page. <script type="text/javascript"> function GetPersonInCompany() { var val = document.getElementById("MainContent_TextBoxPersonName"); PersonsInCompany.GetPersonByFirstName(val.value, FinishCallback); } function FinishCallback(result) { document.getElementById("MainContent_LabelFirstName").innerHTML = result.FirstName; document.getElementById("MainContent_LabelName").innerHTML = result.Name; document.getElementById("MainContent_LabelAge").innerHTML = result.Age; document.getElementById("MainContent_LabelCompany").innerHTML = result.Company; } </script>   If you have any question, feel free to contact me! You can download the code here.

  Read the article

• Running Outlook from VB with multiple email addresses [migrated]

  - by Mac

  I am sending emails from my VB6 system and I am having problems with sending a single email to various email addresses. The code is as follows: On Error Resume Next Err.Clear Set oOutLookObject = CreateObject("Outlook.Application") If Err <> 0 Then MsgBox "Email error. Err = " & Err & " Description = " & Err.Description EmailValid = "N" Exit Function End If Set oEmailItem = oOutLookObject.CreateItem(0) If Err <> 0 Then MsgBox "Email error. Err = " & Err & " Description = " & Err.Description EmailValid = "N" Exit Function End If With oEmailItem .Recipients.Add (SMRecipients) .Subject = SMSubject .Importance = IMPORTANCENORMAL .Body = SMBody For i = 1 To 10 If RTrim(SMAttach(i)) <> "" Then .attachments.Add SMAttach(1) 'i) Else Exit For End If Next i .send End With If Err <> 0 Then MsgBox "Email error. Err = " & Err & " Description = " & Err.Description EmailValid = "N" Exit Function End If ''' .Attachments.Add ("c:\temp\test2.txt") Set oOutLookObject = Nothing I have set SMRecipients to a single email address and it is fine but when I add more addresses seperated by semicolons or spaces it only sends to the original address. My system runs under XP. Another point is that it use to find the addresses in the Outlook Address book and where they wetre not specific enough it would display the matching addresses for selection of the correct one. It no longer does this.

  Read the article

• Ubuntu 12.10 wont boot

  - by John Mark High

  im new to using Ubuntu and just bought a HP Pavilion g6-2240sa with windows 8 pre installed. I made a bootable USB with Ubuntu on it and installed alsongside windows, for 2 days it worked fine, I got into Ubuntu by doing an advanced restart from windows 8 and then booting Ubuntu from the partition it made. When i did the advanced restart today there was only 1 HDD i could select ( there were 3 before windows, a restore partition that was already there when i got the computer and Ubuntu) so i booted from the USB again and re-installed Ubuntu. then did an advanced restart and the 3 partitions where there again, i booted from Ubuntu and now heres my problem. I get the Ubuntu background when its loading then its just a black screen with some writing, its not on long enough to read, then just a black screen with a white _ and the top left corner that does nothing, i have to restat the computer and it auto boots into windows 8. im a little confused as the first time i installed Ubuntu it worked fine until the partition dissaperd), the second time i installed i did everything the same except it found the old Ubuntu so i reinstalled it and now is donst work.

  Read the article

• How to fix Sketchup in Wine when tool starts, but displays empty workspace?

  - by Chaos_99

  I've installed wine 1.6 and winetricks in an Linux Mint 15 system, then downloaded the latest Sketchup2013 'Make' Windows-Installer and installed through wine. I've prepared the wine environment with starting as WINEARCH=win32, installed corefonts and ie8 and enabled the override for the 'riched20' libraries. (I've no idea what the last bit does, but it was advised in some guides.) I've also tried without these steps. Only the win32 seems to make a difference, as the installer will complain about not finding SP2 otherwise. Sketchup is installed successfully and starts, but displays an empty viewport. The program is responsive and everything works, it's just that you can't see anything. I don't get any OpenGL error and the registry entries seem fine, according to the OpenGL issue workarounds floating around the net. I still think it has something to do with OpenGL not working properly, maybe not in the wine environment, but in the linux system? I'm running on a Lenovo W520 with Nvida/Intel hybrid cards, but only the NVida card is active and the properitary nvidia (319) drivers are installed. GLXGears runs fine, but clamps at 2x the refresh rate. glxinfo outputs direct rendering: Yes server glx vendor string: NVIDIA Corporation server glx version string: 1.4 I'm willing to try any linux or wine OpenGL tests to narrow down the problem, if you can offer any advise on what to use.

  Read the article

• Ubuntu install can't find hard drives

  - by Casey Hungler

  I recently got a Dell Inspiron Special Edition 7720 computer. I am trying to install Ubuntu along side Windows. When I use the WUBI installer, the installation of Ubuntu works as long as I do not boot into Windows; if I boot into Windows, when I go back into Ubuntu, I am given a variety of error messages which claim to have corrupt or missing kernel/root directory, etc. I have been working with this problem for about a week, and have reinstalled Ubuntu MANY times. So far, I have eliminated all of the following problems: Corrupt WUBI installation (Downloaded multiple times, used on other systems), I have tried using a CD and a flash drive, both of which work on other computers. I know that no program within Ubuntu is creating the problem. I know that others have successfully installed Ubuntu on a computer with my operating system (Windows 7 SP1). This is a much shortened version of the original question, which has been up for about 5 days, and included a more detailed description of the problem, but left everyone clueless as to the source of this problem. When I spoke with the Dell service technician who came over today to replace my keyboard, he suggested that the driver for my HDD was so new that it was not compatible with the current version of Ubuntu. His reasoning is as follows: 1) During an install from a flash drive or CD, where I am supposed to get the option to wipe my system or create a dual boot, I get a window that asks me to select a hard drive partition, but none are listed. 2) This model of computer was made public in June of this year, while Ubuntu was released in April Adopting this theory, it would seem to me that the WUBI install fails after booting into Windows because Ubuntu can no longer find the files that it needs to load. Does this theory seem at all plausible to anyone? I just want to install Ubuntu and have it stay on my computer. I don't care how I put it there, I just need it to work, so I would TRULY appreciate any advice or suggestions anyone could give. Thanks so much for your time and support!!!

  Read the article

• How can I get non-programmer colleagues on board with bespoke software rather than Dynamics CRM + Sharepoint?

  - by Bendos

  I am working with a company which designs and builds one-off machines. They have been 'dabbling' with hosted Dynamics CRM and Sharepoint (on different servers!) in an attempt to centralise their data and help colleagues collaborate more effectively across projects. They haven't used either system to their potential. Now we are looking at the engineering department who already use a form of version control software for the various CAD files (Autodesk Vault) however it is becoming increasingly necessary to implement more of a generic file version control system as they use many more files than can be managed in Vault (sometimes just photos or scans of paper documents), hence why they were looking at using Sharepoint. However... as the 'programmer' of the bunch, I can see several scenarios which don't seem to fit well with the Dynamics + Sharepoint approach; simple reports based on cross-table queries, exporting certain metrics as a spreadsheet, defining project hierarchies and many-many relationships, and as such I have been pushing for an in-house developed 'ECM' / 'ERP' software package (perhaps in .NET or php). Some colleagues seem to attach a greater value to the MS software (perhaps becuase it has a logo!) but don't see that it's just a framework, not a solution. Can anyone provide a good example of when custom software would actually be better than using Dynamics + Sharepoint and how do I relate that to non-technical staff?

  Read the article

• At the Java DEMOgrounds - ZeroTurnaround and its LiveRebel 2.5

  - by Janice J. Heiss

  At the ZeroTurnaround demo, I spoke with Krishnan Badrinarayanan, their Product Marketing Manager. ZeroTurnaround, the creator of JRebel and LiveRebel, describes itself on their site as a company “dedicated to changing the way the world develops, tests and runs Java applications."“We just launched LiveRebel 2.5 today,” stated Badrinarayanan, “which enables companies to embrace the concept and practice of continuous delivery, which means having a pipeline that takes products right from the developers to an end-user, faster, more frequently -- all the while ensuring that it’s a quality product that does not break in production. So customers don’t feel the discontinuity that something has changed under them and that they can’t deal with the change. And all this happens while there is zero down time.”He pointed out that Salesforce.com is not useable from 3 a.m. to 5 a.m. on Saturday because they are engaged in maintenance. “With LiveRebel 2.5, you can unify the whole delivery chain without having any downtime at all,” he said. “There are many products that tell customers to take their tools and change how they work as an organization so that you they have to conform to the way the tool prescribes them to work as an application team. We take a more pragmatic approach. A lot of companies might use Jenkins or Bamboo to do continuous integration. We extend that. We say, take our product, take LiveRebel okay, and integrate it with Jenkins – you can do that quickly, so that, in half a day, you will be up and running. And let LiveRebel automate your deployment processes and all the automated tasks that go with it. Right from tests to the staging environment to production -- all with zero downtime and with no impact on users currently using the system.” “So if you were to make the update right now and you had 100 users on your system, they would not even know this was happening. It would maintain their sessions and transfer them over to the new version, all in the background.”

  Read the article

• Ubuntu 10.04: boot error for custom compiled kernel - gave up waiting for root device

  - by atharva

  I have installed lucid on my Lenevo Laptop (Y 410 series , x86 platform) and it is working fine. Now I have compiled kernel 2.6.37 downloaded from the kernel tree. I followed usual procedure of compiling kernel (make menuconfig, make, make modules etc). Then I created the initrd image using mkinitramfs and updated my grub using update-grub command. update-grub detects the initrd image of the compiled kernel. However when I boot from this kernel it gives me following error: Gave up waiting for root device. Common problems: -Boot args (cat /proc/cmdline) -Check rootdelay= (did the system wait long enough?) -Check root= (did the system wait for the right device?) -Missing modules (cat /proc/modules; ls /dev) ALERT! root=UUID=/... does not exist and then it falls onto initramfs prompt. I have tried following solutions discussed in different Ubuntu forums: disable uuid and point root=/dev/sda8 (sda8 is where my kernel image resides (both default kernel and compiled one) from /etc/default/grub compile kernel using CONFIG_DEVTMPFS=y suggested here Still I am unable to boot from the compile kernel. Could someone please suggest me the solution?

  Read the article

• Laptop, unable to install discrete graphics card GTX 880M

  - by FoxyShadoww

  So I've bought the GT70 2PE Dominator Pro a few weeks ago and I installed Zorin OS 9 Ultimate on it. Today I tried to install the Nvidia drivers on my laptop since it has the GTX 880M, but my system became unbootable. Can anyone help me with this issue? I will write down what I've tried so far. This is what I've tried so far: Downloaded the newest Nvidia drivers from their website. Pressed CTRL+ALT+F2 to open the terminal page thingy. Logged in and got root access. Stopped the lightdm service. Ran the NVIDIA-Linux-x86_64-340.32.run installer. Pressed the accept button and right after that it told me the following message: The distribution-provided pre-install script failed! Continue installation anyway?. When I install anyway, it will crash my system and makes it unbootable, Does anyone know how to use my GTX 880M? Do I need to enable it on boot time somehow? Thanks for the support, Sapphire ~

  Read the article

• Run Win7 Guest (raw disk) in Ubuntu (which was installed as Dual Boot on existing Win7)

  - by kingdango

  I installed Ubuntu 12.10 on top of Win 7 as a dual boot (awesome!). I'm hoping to use VirtualBox to run my original Win7 instance as a guest OS under Ubuntu. I found this existing question and followed the directions to no avail. I can get the VMDK file created but when I run it I just get a blank black screen with no additional information and Windows never loads. I see no HD activity or anything that would indicate it's loading. I used this command to create the VMDK file: VBoxManager internalcommands createrawvmdk -filename ~/.VirtualBox/Win7Native.vmdk -rawdisk /dev/sda3 It looks like everything was created correctly but I just get a blank screen when I run the VM. I do get this warning when I boot the VM: VirtualBox - Warning The virtual machine execution may run into and error condition as described below... The medium '/home/XXX/.VirtualBox/Win7Native.vmdk' has a logical size of 583GB but the file system the medium is located on can only handle up to 16GB in theory. We strongly recommend to put all your virtual disk images and the snapshot folder on a proper file system (e.g. etc3) with a sufficient size. ErrorId: Fat Partition Detected Severity: Warning How can I get this working?

  Read the article

• Can't remove software - Installed in NULL

  - by ChosSimbaOne

  I've installed software to our administration machine. The problem is that i cannot start the software or uninstall it, as it is not in any directory on the machine. I tried to install it at /pack/CST/... but it is not there and a locate on CST or cst returns nothing. The software is installed from a DVD and not a repository. I've tried to reboot the machine, as i thought i might had something to do with the software being loaded in some sort of tmpfs but that didn't help. I've looked through the entire /etc to check for any relations to the software, but unsuccessfully. I'm out of ideas, to what can cause this problem, anyone got any ideas?? EDIT: I downloaded the iso wich i mounted with: sudo mount -o loop /path/to/iso.iso /path/to/mountpoint sudo /path/to/mountpoint/install.sh Ran the install GUI via an X-session. I choose to install the software in /pack/CST/... but when it exited it said that the software had been installed to /tmp/... There was nothing in tmp, so i decided to reboot the machine and did a full find to see if there was anything left of the software, removed what looked like it could be related. It had placed a script in all the /etc/rs* folder which I removed with: sudo update-rc.d -f scriptname -r I rebooted the machine again, just to be sure. When i run the installer again, it tells me that the software is installed in NULL and i have to remove before installing it. /pack/ is a mountpoint for /q/system/pack What i expected was that the software would be installed in /pack/CST, but it seems to be lock in the system, but I am unable to locate where.

  Read the article

• Ubuntu 12.04 takes too long to boot

  - by msPeachy

  I've recently encountered the following error message: mount: mounting /dev/disk/by-uuid/3f7f5cd9d-6ea3-4da7-b5ec-**** on /root failed: Invalid argument mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target file system doesn't have /sbin/init. No init found. Try passing init= bootarg. Busybox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) _ I run sudo fsck /dev/sda2 which is the Ubuntu ext4 root partition via LiveCD. It checked and fixed the file system. The next time I boot, Ubuntu started to load with the Ubuntu logo and the dots underneath for several hours (with the mouse pointer active on the screen), I even let the computer on overnight but still it did not successfully boot or got to the login screen in the morning. I booted again with the LiveCD and checked the NTFS partitions with ntfsfix and again the NTFS partitions was checked and fixed successfully. I also edited my fstab and commented out the lines that auto-mounts the NTFS partitions. The next time I boot, it took almost 20 minutes for Ubuntu to get to the login screen, after typing the password it took an additional 10 minutes for Ubuntu to get to the desktop. On the desktop, it take several minutes to open any program, displaying the Dash alone takes 5 minutes! Is there a fix for this without having to reinstall Ubuntu? I don't see or get any errors, Ubuntu is just taking too long to boot and to run programs. Please help!

  Read the article

• Partitions for dual boot install with Windows

  - by Tim

  Following is the layout of the current partitions of my single hard drive viewed from Windows 7: C: has Windows 7 system files and my personal data; Q: for Lenovo recovery; SYSTEM_DRV: for Windows boot files; My goals are: to create another partition D: for my personal data, and dedicate C: for Windows system files and applications only. to install Ubuntu alongside Windows. D: will be shared between the two OSes. My questions are: Is it correct that the free space generated from shrinking C: will only be able to create an extended partition, since there are already 3 primary partitions? So must D: be one logical partition on the extended partition, just as the partitions for Ubuntu will be? Will this be bad sometime? If yes, other better solutions? What are the good utilities to accomplish the partition tasks? Can Ubuntu installer solely handle them? Or better to have some of the jobs done in Windows with some recommended softwares? Thanks and regards!

  Read the article

• Upgrading Ubuntu(32 bit) 10.10 -> 11.04 fails and causes a kernel panic on boot

  - by Ubuntu Upgrade

  On Ubuntu 10.10 machine Upgrade to Ubuntu 11.04 using the update manager. The upgrade fails and leaves the system in an unstable state. When I reboot the system I get a kernel panic on boot. The error points to /opt/abc/runtime/lib/libc.so.6. By researching on this I found that there is a third party software abc causes problem. It has it's own runtime(libc) library. In /lib/ directory there is a link file /lib/ld-abc.so.2 ---/opt/abc/runtime/lib/ld-linux.so.2. If we rename this file to /lib/abc.so.2 or remove this file the the upgrade is success. Here is the upgrade log of where it crashes(apt-term.log) ===== Services restarted successfully. Processing triggers for libc-bin ... ldconfig deferred processing now taking place /usr/bin/dpkg: /opt/abc/runtime/lib/libc.so.6: version `GLIBC_2.11' not found (required by /usr/bin/dpkg) /usr/bin/dpkg: /opt/abc/runtime/lib/libc.so.6: version `GLIBC_2.8' not found (required by /lib/libselinux.so.1) ===== Could you please let me know what would be the problem of having a run time link library file in /lib directory. Does the ubuntu upgrade check the 3rd part runtime as well?

  Read the article

• My first blog post…

  - by steveh99999

  I’ve been meaning to start a blog for a while now, (OK, for several years…..) - finally now, here it begins First post, something really simple but, a wise-man once told me about the best way to improve SQL server performance. Store Less Data. That's it.. that's all there is to it... Over the years, I've seen the following :- -  a 200Gb database which held 3 days data. Once business requirements changed, we were able to hold only 1 days data in this database. -  a table developed by DBAs to hold application table cardinality information - that information was collected at 2 hour intervals every day for 7 years ! After 7 years the DBA space-info table had become the largest table in the database - 60 million rows !  It was a simple change to remove alot of the historical intra-day data and change the schedule to run only once per evening. Suddenly that table held 6 million rows instead of 60 million.... - lots of backup and restore history held in msdb. See this post by Brent Ozar for more details on this issue. Imagine how much faster the backups, DBCC Checks and reindexes ran when the above 3 changes were implemented ?   How often do you review your big databases \ tables to see if you’re actually holding only data that is really required by the business ?

  Read the article

• Do we ethically have the right to use the MAC Address for verification purposes?

  - by Matt Ridge

  I am writing a program, or starting at the very beginning of it, and I am thinking of purchase verification systems as a final step. I will be catering to Macs, PCs, and possibly Linux if all is said and done. I will also be programming this for smartphones as well using C++ and Objective-C. (I am writing a blueprint before going head first into it) That being said, I am not asking for help on doing it yet, but what I’m looking for is a realistic measurement for what could be expected as a viable and ethical option for purchase verification systems. Apple through the Apple Store, and some other stores out there have their own "You bought it" check. I am looking to use a three prong verification system. Email/password 16 to 32 character serial number using alpha/numeric and symbols with Upper and lowercase variants. MAC Address. The first two are in my mind ok, but I have to ask on an ethical standpoint, is a MAC Address to lock the software to said hardware unethical, or is it smart? I understand if an Ethernet card changes if not part of the logic board, or if the logic board changes so does the MAC address, so if that changes it will have to be re-verified, but I have to ask with how everything is today... Is it ethical to actually use the MAC address as a validation key or no? Should I be forward with this kind of verification system or should I keep it hidden as a secret? Yes I know hackers and others will find ways of knowing what I am doing, but in reality this is why I am asking. I know no verification is foolproof, but making it so that its harder to break is something I've always been interested in, and learning how to program is bringing up these questions, because I don't want to assume one thing and find out it's not really accepted in the programming world as a "you shouldn't do that" maneuver... Thanks in advance... I know this is my first programming question, but I am just learning how to program, and I am just making sure I'm not breaking some ethical programmer credo I shouldn't...

  Read the article

• Single complex or multiple simple autoload functions [on hold]

  - by Tyson of the Northwest

  Using the spl_autoload_register(), should I use a single autoload function that contains all the logic to determine where the include files are or should I break each include grouping into it's own function with it's own logic to include the files for the called function? As the places where include files may reside expands so too will the logic of a single function. If I break it into multiple functions I can add functions as new groupings are added, but the functions will be copy/pastes of each other with minor alterations. Currently I have a tool with a single registered autoload function that picks apart the class name and tries to predict where it is and then includes it. Due to naming conventions for the project this has been pretty simple. if has namespace if in template namespace look in Root\Templates else look in Root\Modules\Namespace else look in Root\System if file exists include But we are starting to include Interfaces and Traits into our codebase and it hurts me to include the type of a thing in it's name. So we are looking at instead of a single autoload function that digs through the class name and looks for the file and has increasingly complex logic to it, we are looking at having multiple autoload functions registered. But each one follows the same pattern and any time I see that I get paranoid about code copying. function systemAutoloadFunc logic to create probable filename if filename exists in system include it and return true else return false function moduleAutoloadFunc logic to create probable filename if filename exists in modules include it and return true else return false Every autoload function will follow that pattern and the last of each function if filename exists, include return true else return false is going to be identical code. This makes me paranoid about having to update it later across the board if the file_exists include pattern we are using ever changes. Or is it just that, paranoia and the multiple functions with some identical code is the best option?

  Read the article

• Creating movement path displays in a top-down 2d RTS

  - by nihohit

  My game is a top-down 2d RTS coded in C# using SFML's libraries. I want that during unit selection, a unit will display it's movement path on the map. Currently, after the path is computed as a list of directions ({left, up,down, down, down, left}, as an example), it's sent to the graphical component to create it's UI equivalent, and here I'm having some problems. current, these I've checked three ways to do it: compute the size of the image (in the example above it'll be a 3*2 rectangle) and create an invisible rectangle, and then go over the directions list and mark each spot with a visible point, so as to get a continous line. This system is slightly problematic because of the amount of large images that I need to save, but mostly because I have a lot of fine detail onscreen, and a continous line obstructs the view. again, compute the size of the image, but now create several (let's say 4) invisible images of that size, and then instead of a single continous line I'll switch between the four images, in each will appear only a fourth of the spots, in a way which creates a path animation. This is nicer on the eye, but here the memory demands, and the amount of time needed to compute each such image-loop is significant. Just create a list of single markers, each on a different spot on the path. This is very quick & easy on memory, but too sparse. Is there a simple or resource-light system to create path-animations?

  Read the article

• How to prevent overlapping of gunshot sounds when using fast-firing weapons

  - by G3tinmybelly

  So I am now trying to find sounds for my guns but when I grab a gun sound effect and play it in my game a lot of the sounds are either terrible sounding or have this horrible echoing effect because as a gun shoots sometimes the previous sound is playing still. public void shoot(float x, float y, float direction){ if(empty){ PlayHUD.message = "No more bullets!"; return; } if(reloading){ return; } if(System.currentTimeMillis() - lastShot < fireRate){ //AssetsLoader.lmgSound.stop(); return; } float dx = (float) (-13 * Math.cos(direction) + 75 * Math.sin(direction)); float dy = (float) (-14 * -Math.sin(direction) + 75 * Math.cos(direction)); float dx1 = (float) (-13 * Math.cos(direction) + 75 * Math.sin(direction)); float dy1 = (float) (-14 * -Math.sin(direction) + 75 * Math.cos(direction)); PlayState.effects.add(new MuzzleFlashEffect(x + dx1, y + dy1, (float) Math.toDegrees(-direction))); PlayState.projectiles.add(new Bullet(this, x + dx, y + dy, (float) (direction + (Math.toRadians(MathUtils.random(-accuracy, accuracy)))))); if(OptionState.soundOn){ AssetsLoader.lmgSound.play(OptionState.volume); } bulletsInClip--; lastShot = System.currentTimeMillis(); } Here is the code for where the sound plays. Every time this method is called the sound is called but it happens so often in this case that there is this terrible echoing. Any idea on how to fix this?

  Read the article

• ubuntu boots only with usb

  - by klimat

  Just installed Ubuntu 11.04. But it boots only from usb. Seems like I didn't pay attention during selecting boot device. sudo fdisk -l [sudo] password for klim: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000177e1 Device Boot Start End Blocks Id System /dev/sda1 1 60045 482302976 83 Linux /dev/sda2 60045 60802 6080513 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 60045 60802 6080512 82 Linux swap / Solaris Disk /dev/sdb: 4004 MB, 4004511744 bytes 124 heads, 62 sectors/track, 1017 cylinders Units = cylinders of 7688 * 512 = 3936256 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000eee1a Device Boot Start End Blocks Id System /dev/sdb1 * 1 1017 3909317 b W95 FAT32 grub updating or another "grub" operations don't work as I've tried. Can I just copy whole boot folder from usb to HD or smth like that? Any kind of help is appreciated. Apologize for my newbie skills.

  Read the article

• Command Query Separation

  - by Liam McLennan

  Command query separation is a strategy, proposed by Bertrand Meyer, that each of an object’s methods should be either a command or a query. A command is an operation that changes the state of a system, and a query is an operation that returns a value. This is not the same thing as CQRS, hence why I think that CQRS is poorly named. An Example of Command Query Separation Consider a system that models books and shelves. There is a rule that a shelf may not be removed if it holds any books. One way to implement the removal is to write a method Shelf.Remove() that internally checks to make sure that the shelf is empty before removing it. If the shelf is not empty then it is not removed and an error is returned. To implement this feature following the principle of command query separation would require two methods, one to query the shelf and determine if it is empty and a second method to remove the shelf. Separating the query from the command makes the shelf class simpler to use because the state change is clear and explicit.

  Read the article

< Previous Page | 675 676 677 678 679 680 681 682 683 684 685 686  | Next Page >