Search Results

Search found 3249 results on 130 pages for 'packet loss'.

Page 68/130 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• RAID setup for maximizing data retention and read speed

  - by cat pants

  My goals are simple: maximize data retention safety, and maximize read speeds. My first instinct is to do a a three drive software RAID 1. I have only used fakeraid RAID 1 in the past and it was terrible (would have led to data loss actually if it weren't for backups) Would you say software raid 1 or a cheap actual hardware raid card? OS will be linux. Could I start with a two drive raid 1 and add a third drive on the fly? Can I hot swap? Can I pull one of the drives and throw it into a new machine and be able to read all the data? I do not want a situation where I have a raid card fail and have to try and find the same chipset in order to read my data (which i am assuming can happen) Please clarify any points on which it sounds like I have no idea what I am talking about, as I am admittedly inexperienced here. (My hardest lesson was fakeraid lol) Thanks!

  Read the article

• Badwidth-Hogging Linux Server Causing Trouble

  - by BlairHippo

  We have a Linux server (2.6.28-11-generic #42-Ubuntu) that's misbehaving on a client site, gobbling up an entirely unacceptable percentage of the client's bandwidth, and we're trying to figure out what the heck it's doing. And the guy who had the sysadmin skillset has yet to be replaced. We're at a loss for what could be causing all that network traffic, and need to figure it out SOON. What log files should I be looking at to find this information? What analysis tools would you recommend for this task? Please note that I'm not looking for a tool that will allow me to analyze FUTURE traffic. The client is on the verge of shutting the machine off entirely; I need to figure out what it's been doing with the data I already have, if that's at all possible. My thanks in advance for helping a development monkey play sysadmin.

  Read the article

• Recovering database files from a corrupted VHD

  - by Apocalypse9

  We have a SQL server hosted on a virtual machine. Our hosting company updated/restarted the server and for some reason the virtual machines became unbootable. We've spoken to Microsoft and used a few higher level tools to attempt to recover the virtual machines but were unsuccessful. In browsing the file system the database folder doesn't even appear. I'm wondering if there are any lower level tools that might be able to find and copy the database files. As far as I know the physical hard drive is ok, so I'm hoping there may be some way to recover the files themselves even if the rest of the virtual machine file-system is a loss. Obviously we're in a bit of a bind, and any help/ suggestions are very much appreciated.

  Read the article

• Is it safe to operate a laptop without battery?

  - by leladax

  I know it's 'unsafe' in terms of data loss but I noticed motherboards still have some of their circuits on power when they are plugged in [e.g. a circuit that must wait for power-on signals is certainly one of them]. Hence, I wondered if it would increase the life of the laptop if the battery was simply off. Let alone that may also increase battery life, but that's the least of my concerns. Notice the main point is to plug it off on hibernate and have no power source whatsoever for the duration of being off (apart from the clock battery). (i.e. saving having to plug off the battery every time)

  Read the article

• Cannot connect to internet with Clearwire modem.

  - by ide

  I'm currently using a Motorola WiMAX modem (CPEi 25725) and cannot connect to the internet. I can connect to the modem at 192.168.15.1 and check its status. It says that it has good/excellent connectivity to the internet and shows all five signal bars. Additionally it has sent and received some WiMAX packets so I believe it is connected to a tower. I'm at a loss for what the problem is. Unplugging the modem, restarting it from software, and restarting my computer (Windows 7) have not helped. Windows still reports that it is not connected to the internet. Alternatively, could this be an ISP issue? I have heard that Clearwire is a not-so-reputable ISP that blocks VoIP, and I was using Skype recently.

  Read the article

• Service or software to auto-sync one server to another so they are identical?

  - by Ryan

  We have a main node in a DC data center and want to setup a back-up node in Seattle. The back-up node will only be used if the DC node goes down and we switch it over while DC node is repaired. The question is, what kind of services out there allow me to sync the data, I suppose we want to do it fairly frequently so if something goes down there isn't much loss in data between the time of failure and the last back-up/sync. Is there any common solution for this? It's Windows Server 2003 running Parallels Virtuozzo.

  Read the article

• Installing Color-Theme with GNU Emacs 23.2 on OS X Snow Leopard

  - by idclark

  Hi all, I've just started using emacs a week ago and I've been unsuccessful in installing color-theme using GNU Emacs 23.2 on OS X. With Ubuntu the whole process took maybe a few minutes with the package manager, but I'm completely at a loss with OS X, what the heck is a "tarball"? I don't have any experience compiling source code. I know Carbon Emacs comes with color-theme packaged, what would i lose by reverting to Emacs 22? I'd prefer staying with GNU Emacs 23 across both systems. Any input is greatly appreciated!!

  Read the article

• Cannot connect to internet with Clearwire modem

  - by ide

  I'm currently using a Motorola WiMAX modem (CPEi 25725) and cannot connect to the internet. I can connect to the modem at 192.168.15.1 and check its status. It says that it has good/excellent connectivity to the internet and shows all five signal bars. Additionally it has sent and received some WiMAX packets so I believe it is connected to a tower. I'm at a loss for what the problem is. Unplugging the modem, restarting it from software, and restarting my computer (Windows 7) have not helped. Windows still reports that it is not connected to the internet. Alternatively, could this be an ISP issue? I have heard that Clearwire is a not-so-reputable ISP that blocks VoIP, and I was using Skype recently. EDIT: I called Clear's tech support and apparently their network is having significant problems at the moment. Guess there's nothing an end-user can do about it.

  Read the article

• Full computer freeze with audio stuttering after playing games for a period of time

  - by Wes

  I've been having a problem with my computer freezing completely when playing games like LA Noire or SW:TOR (yay early access!). Basically, what happens is I will play for around an hour or so (depending on the game) and when the freeze happens, the entire computer locks up and any audio that was being played glitches out and stutters broken-record style (only much shorter. Very techno). I think it might be heat related and thought it might be my video card overheating, so I have been setting my video card (Nvidia Geforce 260GTX 216-core) fan to highest setting, but that has little to no effect. Now I'm beginning to think it's either my FSB or CPU overheating. Can anyone provide some insight or similar experiences? I'm really at a loss and don't wanna damage my rig beyond repair.

  Read the article

• Looking for Unix tool/script that, given an input path, will compress every batch of uncompressed 100MB text files into a single gzip file

  - by newToFlume

  I have a dump of thousands of small text files (1-5MB) large, each containing lines of text. I need to "batch" them up, so that each batch is of a fixed size - say 100MB, and compress that batch. Now that batch could be: A single file that is just a 'cat' of the contents of the individual text files, or Just the individual text files themselves Caveats: unix split -b will not work here as I need to keep lines of text intact. Using the lines option is a bit complicated as there is a large variance in the number of bytes in each line. The files need not be a fixed size strictly, as long as it's within 5% of the requested size The lines are critical, and should not be lost: I need to confirm that the input made its way to output without loss - what rolling checksum (something like CRC32, BUT better/"stronger" in face of collisions) A script should do nicely, but this seems like a task someone has done before, and it would be nice to see some code (preferably python or ruby) that does atleast something similar.

  Read the article

• Booting ubuntu from usb hdd: GRUB menu not shown

  - by emanemos

  Hello, could anyone help me to boot ubuntu-9.04 from usb hard disk? This disk contains /boot primary partition. During ubuntu installation I used "Advanced" button and asked to install GRUB to the /boot partition. Later I checked whether GRUB files are really present in this partition. They are. However, I get stuck while trying to boot. The boot menu ("ubuntu generic version", "ubuntu recovery mode", etc...) is not shown. Instead I am thrown to GRUB minimal bash-like version. I feel at a loss and have no idea why I am pointed to this minimal version. Can anybody prompt me what to do?

  Read the article

• Problem installing a w2k DC on Hyper-V?

  - by Tony

  Hi, We have a cluster with four node windows 2008 r2 and hyper-v installed. We would like to install 2 VM with role domain controller w2k (the domain is different from the domain of the hyper-v cluster). Do you know if there are any restriction on doing it? Some collegues say that we risk data corruption if we do live migrations. Others speak about the fact that Microsoft don't support w2k any more. And others have doubts because the global catalog server installed on these DC could have loss of performance. Any idea? Thanks Tony

  Read the article

• Everytime I ping my server, it is pinging localhost instead?

  - by esac

  I recently setup a new server for use with SQL. When I tried to connect via SSMS remotely, it failed. When I pinged it, it is pinging localhost, what is going on here? Please let me know if more details will help. It is Windows Server 2008. C:\>ping 0x7F000001 Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms

  Read the article

• systemctl (Fedora 17) and interacting spawned processes's consoles

  - by Sean

  Introduction I've recently upgraded to Fedora 17 and I'm getting used to the newer systemctl daemon manager versus shell init scripts. A feature I need on some of my daemons is the ability to interact with their consoles because unclean shutdowns not initiated by the process itself can cause database corruption. So, performing a systemctl stop service-name.service for example might cause irreversible data loss. These consoles read user input through stdin or similar methods, so what I've been doing on my old OS is to place those daemons foregrounded in a screen session, and I suspended that screen session with ^A ^z. It's also worth noting that I've now made systemctl do this automatically if the computer reboots, but it still doesn't solve my potential data corruption problem I'm trying to avoid. My Question Is there a way to use systemctl in order to directly interact with the console of processes it spawns? Can I hook a process through systemctl to get access to its console? Thanks You guys always give great answers, so I'm turning to you!

  Read the article

• "destination host unreachable" while ping attempt between 2 pc on 1 network

  - by Roberto Sadfasdf

  I have 2 computers in my network ones ip address is 192.168.2.31(PC-A) and the others is 192.168.2.33(PC-B). When I'm trying to ping from PC-B to PC-A it says: Pinging 192.168.2.33 with 32 bytes of data: Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Reply from 192.168.2.31: Destination host unreachable. Ping statistics for 192.168.2.33: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) And when i'm trying the otherwise it tells me same message with ip address switched..They are both can connect to the Internet

  Read the article

• Access Linux Samba-Share from Snow Leopard

  - by Space_C0wb0y

  Hello there! I have a linux machine with a samba-share. Other windows machines can access that samba-share no problem. Now I have a new MacBook running Snow Leopard and I have no clue on how to access it. In finder it shows the linux-machine, but I have no idea how to access it. In some blog it said that this: `smbclient -U <username> -L <hostname>` can be used to list samba-shares. When I do it, I get `session setup failed: NT_STATUS_LOGON_FAILURE` I am at a loss here. Any help on how to approach that problem would be appreciated. Can you provide some hints or point me to some good howto?

  Read the article

• moving my site, IP change worries...

  - by Sherif Buzz

  Hi all, my site has outgrown the shared hosting account it's on and i've setup a VPS that i'll be moving to soon. I cannot keep the same IP between my new account and the old one and I'm a bit at loss as to how to minimize user downtime while the new IP is reflected in all DNS caches. Note I cannot have the site running on both accounts at the same time as it's a dating site and this would cause data inconsistency. Here's what i am planning to do : Put up a 'under maintenance' page on old host Get the site up and running on new host, and update domain to point to new host. Hope downtime isn't too long. Would it be a good idea to have a link on the page in (1) that opens the new site but using it's ip ? Or even redirect all requests at the old host, to the new one (again by ip) ? Any advice much appreciated.

  Read the article

• Unable to SSH into ESXi 4.1 host - "Access Denied"

  - by Andrew White

  I am unable to SSH into an existing ESXi server. I have a user which is in the "root" and "users" group and is able to connect via vSphere. However after enabling "Remote support (SSH)", attempting to connect by putty and entering my username/password when prompted I am presented with an "Access Denied" message. I have run through the options presented at this KB article to no avail. I have taken down the firewall on the machine (it is remote) temporarily to check if this helped - no change. The username/password are definitely correct and I can obviously get connectivity if I am presented with the username/password prompt. I am at a bit of a loss what else I can try. Thanks all

  Read the article

• Advantages to upgrading from SharePoint Foundation 2010?

  - by sharepointQuestion

  I feel like this should be extremely obvious, but after staring at this document from Microsoft and Googling for a while I'm still at a loss as to the advantages of SharePoint Server 2010 and SharePoint Enterprise 2010 over SharePoint Foundation 2010. My users currently use SharePoint Foundation 2010 to collaborate on a handful of excel documents within the office. There is talk of expanding to have a second and third SharePoint server at another plant and at our corporate offices. If there is a reason to upgrade now would be a good time to ask for the money while we're talking expansion. Is it worth it from either an administrative or an end-user perspective? Or is the free version really just that wonderful?

  Read the article

• Exchange Failover Solution

  - by Dan

  I've been given the task to come up with an exchange solution that will support 200 users total throughout 4 states. 1GB per user. It needs to have a failover solution,The failover must reside in another location. There is an mpls that connects the locations. I am hoping to get recomendations on hardware, software setups. I recently worked with some big name reps and they steered me in the wrong direction and now I'm a few days away from my proposal date with bogus quotes and scrambling for a solution. I used to manage a standalone 2003 exchange server for years and am at a loss now with figuring out a clustering/failover...Any help would be greatly appreciated. thank you

  Read the article

• Booting a native Windows install in Virtualbox: is it possible?

  - by Aron Rotteveel

  I am looking for something similiar to Bootcamp. Currently, I run Ubuntu Maveric as my primary operating system and run Windows 7 in Virtualbox. For some tasks, however, running Windows virtualized just seems to result in too much overhead and speed loss, and I'd like to be able to boot natively. The ideal situation would be to setup Windows and Ubuntu in dual boot on seperate partitions, with the ability to boot the Windows partition in Virtualbox on Ubuntu as well. Is this possible? Also, how it is that Bootcamp seems to be the only system capable of this?

  Read the article

• ESX Firewall Command Troubles

  - by John

  Hi, I am working on creating some firewall rules to stop some of the SSH brute-force attacks that we have seen recently on our ESX server hosts. I have tried the following rules from the CLI to first block all SSH traffic and then allow the two ranges that I am interested in: esxcfg-firewall --ipruleAdd 0.0.0.0/0,22,tcp,REJECT,"Block_SSH" esxcfg-firewall --ipruleAdd 11.130.0.0/16,22,tcp,ACCEPT,"Allow_PUBLIC_SSH" esxcfg-firewall --ipruleAdd 10.130.0.0/16,22,tcp,ACCEPT,"Allow_PRIVATE_SSH" However, these rules are not working as intended. I know that if you do not enter the block rule first, then the allow rule will not be processed. We are now having the issue where the first entered allow rule is being ignored such that the block rule works and the last entered allow rule works. I was curious if anyone had any ideas on how I could allow a few different ranges of IP's with the esxcfg-firewall --ipruleAdd command? I am at a loss and am having a hard time locating examples or further documentation about this. Thanks in advance for your help with this.

  Read the article

• 8400GS causes BSOD in Acer M1610 running Windows 7 32-bit

  - by Arch Angel

  Title says it all, just installed the Nvidia card, I know this is a driver related issue I just don't know how to fix it I cannot find a driver version that will work not even the one that windows selects for the card, or the one on the disk supplied with the card. Any help will be appreciated. BSOD output: What happens when I try to install Any driver that does install causes a BSOD the driver disk says it supports windows 7 and the drivers on the disk cause a BSOD too i'm at a loss of what to do. EDIT: Yes I uninstalled the intergrated drivers. PCIE x16 Card from Gainward Tried multiple driver versions Versions that wont install because they cannot pick up card 190.38, 191.07, 196.21, 197.45 Versions that install and cause BSOD 258.96, 260.99, The drivers on the disc (not sure of the version) and drivers from the gainward website (driver version 263.14)

  Read the article

• Windows 7 formatting HD

  - by Rick

  I have an Acer Aspire 5610 that I am trying to put an Operating System back on. I am trying to install windows 7 32-bit and it will not go through the install. Not sure why. I am now trying to reformat the hard drive and start with a fresh formatted HD. No other partitions. The problem is that the install disk is not doing the format it is giving me an error. The error is 0x8007045d. I am at a loss. This is the first time running into this issue. Please Help.

  Read the article

• Linux virtual disk stripping or multi-path samba share?

  - by wachpwnski

  I am trying to build a file storage box for media. It needs to span two or more directories or partitions as one share. There are a few solutions but reasons why I want to avoid them, among these are: Using LVM2 for stripping. I don't really have the resources to back up everything on the volumes incase one HDD goes south. I would end up loosing everything. Maybe there is a better option for this to prevent data loss with hot swappable drives or some kind of raid. Using symbolic links in the share. This will get tedious every time a new sub-directory is added. Is there some kind of software raid I can use to merge two directories virtually? I am aware of the issue where /dev/hda1/media/file.1 and /dev/hdb1/media/file.1 both exist. But I'm sure there are some creative solutions for this.

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >