Search Results

Search found 25196 results on 1008 pages for 'hard drive cache'.

Page 681/1008 | < Previous Page | 677 678 679 680 681 682 683 684 685 686 687 688  | Next Page >

• No wireless adapter in msi u200

  - by Mino Marimat

  I have a MSi u200, and the weird thing was that I was using this normally before, then after a few minutes all of a sudden it couldn't find the wifi signal from my house. I did some troubleshooting and a bit of search in the control panel, and it seems like my hardware is missing. :( I can't even turn on the wireless light using Fn+F8, so my suspicions about the missing hardware strengthened. I tried searching for DIY fixes, but I found out that the wireless card is actually built-in deeper, unlike the RAM cards and the hard drive where you can either replace or add more cards. What do I do?? As of the moment, I can get connected to my wifi here at home using a wireless adapter via usb, and it's working. So my guess about the hardware problem seems correct. HELP!!! Thanks!

  Read the article

• Best ways to move a server room and 80 desktops to a new building

  - by Marko

  Need to plan the best way to physically move a server room (12 IBM x3400 towers) and all associated networking equipment to a new building. Everything is going, comms (80 strong call centre operation), desktops(80-90) the whole lot and has to be done efficiently over a weekend. What I cant seem to find are the best ways to move equipment, i.e is it best to remove hard drives and pack them separetely, do I pack the chassis' with foam and/or surround them in bubble wrap? Are there specific products designed to move computer equipment and where would I find these. The internet has failed me so far, please help

  Read the article

• Unattended installation for windows 7 x86

  - by user448402

  Are there any pre-created Autounattend.xml files for Windows 7 unattended installation x86? I have been experimenting and creating the XML file but I am always being prompted to choose which hard disk to format. I can't seem to add in the script to automate that process. I tried adding the DiskConfiguration portion but the installation keeps giving me error that my diskID is incorrect. How do I resolve this issue? Is there any pre-created Autounattend.xml file that automates everything? I want it to work for VMware virtual machine. Currently, VMware creates its own default disk. So RT Seven Lite only works for normal computer and not VMware.

  Read the article

• How can I install a scanner by IP?

  - by user54266

  I'm trying to install a scanner by IP the same way you would install a printer by IP. I don't want to install the horrible HP Solution Center software but I don't know how to install a network scanner without the software. I'm having a hard time googling this because when I search for things like "install network scanner" or "install scanner by IP" all the results are for things like Angry IP Scanner which is clearly different than what I'm trying to get. Thanks in advance. This is for Windows Vista, but Windows 7 instructions will do.

  Read the article

• xen virtual machines get to many porcentages of cpus

  - by ki0

  Hi everyone, This is my question. I have one Xen server with 8 CPU's and 6 virtual machine running, each virtual hard disk are running in diferent physical hardisk. Everything worked fine but sometimes one virtual machine get almost whole CPU, if the Domain-0 is 90% that is normal, the virtual machine is 500% usage of CPU. I have improved that it is not depends who are working with the VM even when nobody are working with the server this still happens. I dont know what happen. Anyone have any idea?¿ or anyone have happened the same?¿

  Read the article

• A solid unity plugin to stream youtube video

  - by user3670018

  I've been searching for hours for a Unity 4.5 plugin that allows users to watch youtube video in an android app. (I've found several solutions for IOS but not android!). Can anyone give me some pointers? I've tried uwebkit(which only works for IOS), vuforia, and many google.com suggestions I found online. None of them worked and its very fustrating. I just want to watch a youtube video via an unity app in android phone/tablet. It shouldn't be that hard of a task /=. Oh, I've also tried Unity support forum, the response rate is a bit lower in SO/SU.

  Read the article

• Outlook 2013 Win 7 64 bit

  - by Rob P

  I am using Outlook 2013, and on some messages I can see the Other actions > View Source, but other messages I don't see it, I suspect somehow it has been disabled. Any suggestions as to how to see the source? I Tried adding a shortcut to this option to the Quick Bar list, on the messages in question, the shorcut disappears. I have also tried to alter registry, but I don't wnat to. I used to be able to right clight in the message to see the source, why is everything so hard now?

  Read the article

• error: no such partition. Grub rescue

  - by user1440731

  I deleted Linux (Ubuntu) partition from windows Ii forgot to repair mbr. The thing is I don't have my windows boot CD with me now and not CD drive. so the solution I needed is that is there any small utility software that can be easily downloaded (I knew about hiren CD but that's about 500 MB and I don't need that whole stuff) and can work through USB? Also explain steps to perform. Thank you UPDATED: Any small Linux live CD can also b taken into consideration as i can boot that on USB using pendrivelinux software

  Read the article

• Cannot connect Solaris 10 to Windows 7

  - by user999353

  I'm trying to connect a Solaris VM (powered by VMware Player) to Windows Explorer in Windows 7. When I try to map the network drive I get the following: The specified server cannot perform the requested operation. I am using the following URL which has worked on a machine I used before. The only thing that has changed is the IP address of the Solaris machine. I am able to connect to the VM via putty. \\1.2.3.4\xxx\yyy I checked and I think samba is running.. root 375 1 0 09:53:39 ? 0:00 /usr/sfw/sbin/smbd -D root 376 375 0 09:53:40 ? 0:00 /usr/sfw/sbin/smbd –D Anyone any ideas?

  Read the article

• Computer won't stay powered up

  - by Android

  I have just tried to turn my PC on this morning and it won't stay powered up. It will come on as normal for about 5 seconds, not quite long enough for the monitor to wake up. Then it will power off. After about 2 seconds it will start again, it will continue like this until I pull out the plug. Plugging it in again doesn't restart the cycle although pressing the power button does. I have tried to clear the cmos but beyond that I have no ideas. It was working perfectly when I put it in hibernate last night. NOTE: I am using a Dell Optiplex 755 UPDATE 1: I took out the motherboard battery and it almost came on then it displays the message Error loading Operating System UPDATE 2: After taking out the custom video card, it says "No hard drive present"

  Read the article

• Will an SSD help prevent laptop overheating?

  - by alex

  My laptop has a severe overheating problem, even though it's quite new (< 6 month). It's still regularly overheating to the point where it shuts down. This usually happens while playing games but sometimes while watching videos or using Skype video calls for a long time. I'm already keeping it mid-air on a cooling tray with 2 external coolers, but that doesn't seem to help. The only other thing I can think of is installing an SSD instead of the current HDD. I've read up that they generate less heat then hard drives, but can it actually make a serious difference to the heat level of the laptop? If there are any other suggestions, please feel free to comment. The laptop is a Toshiba Satellite L650D-11R.

  Read the article

• Why can't I open programs after watching youtube videos for a while?

  - by manjivsanotsu

  I have recently built a new PC, and it worked fine for a while (1-2 months of no problems whatsoever). However in the recent weeks I noticed that after I watched some youtube videos and closed everything, I can no longer do anything except move the mouse and expand the Startup Menu. If I click on any of the programs on the Start Menu or type a program on the Run text box, it won't open anything. I can't open taskmgr, or windows explorer, or even shut down the PC. I don't have anything else running when I'm watching videos except ZoneAlarm and Avast. The only workaround I can do when this happens is a forced shutdown (holding the power button of my PC), and restart if I wanted to do anything more. But this happens a lot - about 4-5 times a week so I'm worried it would fry up my hardware if I keep on doing this. OS: Windows 7 Other Installed Software: Open Office, Tropico 4 game, Adobe Photoshop Browser used: Google Chrome Hardware: CPU: i7 2600K RAM: 16 GB Motherboard: Asus P8Z68-V GEN3 Hard Drive: 120GB Corsair Force GT SSD Graphics: 2047MB GeForce GTX 560 Ti

  Read the article

• Windows XP: How to boot up in normal mode after improper shut down?

  - by Nick

  I work in two different locations and whenever there is a power outage at one of the locations, Windows XP detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows XP enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows XP always boots into NORMAL mode no matter how many times it is improperly shut down?

  Read the article

• How can I run fsck on a disk image via Mac Terminal?

  - by mvizual

  I want to run fsck on a disk image before I use it to restore (replace) a corrupted volume. Using Terminal, what would be the proper command, syntax, and options for this operation? I've just recently become acquainted with Terminal and line commands, so syntax and specific options aren't part of my computing vocabulary. I'm using Terminal 2.1.2, bash, OS 10.6.8. Ultimately, I'm trying to restore an image to a secondary startup volume (external drive). The image is mounted on my desktop and I want to check it for errors before I use it. Disk Utility runs "repair disk" successfully but the integrity of the image is suspect.

  Read the article

• Pull/push student assignment files from computer lab computers (Windows 7)

  - by mkstreet

  I have a computer lab with about 35 PC's all running Windows 7. The students do their work and save it on the D-drive in a particular folder such as a folder with the same name as the computer's name (e.g. LABPC001). I'd like a centralized way to pull all these folders in to the teacher's computer in the lab to check the assignments. It would be best if this didn't involve using an external website (e.g. Dropbox). I would also like to be able to distribute (send) files to the students in these same folders. I've seen software applications that do this but they cost about US$1000 which is far beyond our means. Suggestions for free, or almost free, best ways to set this up?

  Read the article

• Windows 7 File Transfer Speed over Gigabit is slow

  - by Adam Haile

  I've got windows 7 pro running on my file server and my main desktop. Each has a gigabit network connection and I'm connected to a gigabit switch. However, when trying to copy some large files, it's running pretty slow at a measly 12-15 MB/s The data is coming from a 7200RPM SATA drive (which I think should be good for almost 150MB/s) and going to a Drobo on the server connected via FireWire 800, so I can't think of any bottlenecks I might have in the hardware. But TeraCopy still says it's only going at 12-15 MB/s What else could be wrong here?

  Read the article

• LAN full of public ipv4 addresses - How to filter it?

  - by sparc86

  The answer to my question maybe is not that hard but anyways, I do not know what to do. So, I just got in a new job in a Univerisity and I found out that the network (the LAN) is full of public IP addresses. Seriously, the whole LAN (probably more than 150 hosts) has it' own internet IP address and I don't know how to manage it. I have a very good experience using iptables (Linux firewall) in a NAT'ed environment. But then how should I proceed in an environment where all my LAN is working with a bunch of public IP addresses? Should I just use the "forward" rules and ignore the NAT rules or is there any other issue in such environment which I should take care? Can I add a firewall between the router and the LAN in order to produce packet filtering for these public IP addresses in my LAN or will this just not work? Thanks!

  Read the article

• I tried installing Ubuntu 10.04 and I got this message - any ideas on what to do?

  - by vette982

  No root file system defined. Please correct this from the partition menu. This message shows up when I first boot into Ubuntu after the installation. I installed it by mounting the ISO with Daemon Tools, and I just did the default Wubi installation. I keep reading everywhere that I need to choose my installation directory, but I don't get any option to do that. These are all the options I get for installation directory. I have a C and D partition on my drive, and I tried installing it on both and no luck either way. Any ideas?

  Read the article

• Clean Install: Ubuntu 8.04, 10.04 or somthing else?

  - by Robert S. Barnes

  I'm faced with a pending clean install due to a dying hard drive in my old Dell Inspiron 8600 laptop. I've been running Ubuntu 8.04 on it since... 8.04 and I've been more or less happy with it except that it's a PITA to recompile the kernel or do any other kernel related work. I mostly do software dev on it, gcc, gvim, c/c++/perl/php/mysql and running vmware server 2.0. I've heard mixed reviews of 10.04, and am wondering what to put on the new HD. I'm even considering just sticking with 8.04 as it seems to mostly meet my needs. Any suggestions?

  Read the article

• NFSv4 with idmap

  - by HTF

  The following errors appear on the NFS server, could you please advise how I can fix this? Details: System: CentOS release 6.4, NFS: nfs-utils-1.2.3-36 # cat /etc/idmapd.conf [General] Domain = domain.com [Mapping] Nobody-User = nobody Nobody-Group = nobody [Translation] Method = nsswitch Sep 3 08:25:28 snode1 rpc.idmapd[1382]: nss_getpwnam: name '0' does not map into domain 'domain.com' Sep 3 08:25:29 snode1 rpc.idmapd[1382]: nss_getpwnam: name '500' does not map into domain 'domain.com' EDIT: 03 Sep 2013 10:41 Please note that I'm using NFSv4 and these errors appear on NFS server only (not NFS clients). Server: # cat /etc/sysconfig/nfs MOUNTD_NFS_V2="no" MOUNTD_NFS_V3="no" ... RPCNFSDARGS="-N 2 -N 3" Clients: # cat /etc/fstab server:/ /data nfs4 defaults,hard,intr,timeo=15,_netdev,noatime,nodiratime,nosuid 0 0

  Read the article

• Resizing 2 partitions (NTFS and ReiserFS3)

  - by steven

  When creating a Win7 and Gentoo setup I miss allocated the space needed for Windows and Linux. I have a 320 gb drive and created a 40gb partition on Win7 and used the rest of the space on Linux. Now I need about 70gbs on the NTFS partition. Are there any tools that will shrink the ReiserFS3 partition? (It is using about 80gbs and has the reset free), while growing the NTFS partition? If I have to clone, does the tool copy freespace inside the image? I would prefer this not happen as that I'm sort on backup space. [I can handle a 100-150gb of images, but I can't copy the entire HD]

  Read the article

• How do I define multiple urls for svn project?

  - by yarun can

  I am working on a project in mixed environment (win, cygwin, linux) which is on a "shared ntfs drive". I am the sole user there for this project is not really duplicated for multiple users. The main issue I am facing is that the original svn project import was done with a cygwin path like "/cygdrive/z/path to svn project". Now when I am on win svn or linux svn this does not work with svn since such paths do not exists for those versions. Is there a way to define more than one path for the svn import, like maybe some kind of configuration that i can use to fire on the command line? thanks

  Read the article

• How do I run perfmon against a remote machine?

  - by WindyCityEagle

  For starters I'm trying to do this from a Windows 7 box to a Windows 7 box. I know the simple answer should be to enter \\computername where it says "Select Counters From Computer". Trouble is, every time I do that I get an error message that says "Unable to connect to machine" I know the machine is out there and accessible, because I can bring up windows explorer and enter \\computername\c$ in the explorer bar and then can browse their c drive. So the machine is out there. Are there special permissions for perfmon? Is here a service which needs to be running on the remote machine?

  Read the article

• How to display downloaded youtube annotations ( not captions) on offline video player?

  - by kowalsk

  i need to display the annotations for some of my downloaded youtube videos. It's also important to make them closeable. Making them clickable would also be nice. What i found out so far: From what i understand there there is a vlc plugin/extension that could also render the annotations but i'm having a hard time finding it. Mplayer might also be an option but i'd have to convert the xml files to .bmp and then use a bmov filter to play them. Any suggestions welcome. Edit: to further clarify i would like to display/overlay annotations from a youtube xml file (i'm willing to go through a conversion step if i have to) pretty much the same way i can display subtitles from a srt or sub file. Edit2: I'm open to using other players too ( if vlc is not a feasible option for what i want)

  Read the article

• How to prefer ipv6 over ipv4 only for specific websites?

  - by kria

  I only have ipv6 connectivity via a HE tunnel on my router, so normally I want to prefer ipv4 over ipv6. For some websites however, I would like to prefer ipv6. Right now I have just set DisabledComponents to 0x20 and hard coded the ipv6 resolution into my hosts file for the sites i want to access over ipv6. Since these ip addresses change at times, this is not a good solution. Any ideas on how to handle this in a non-clunky way? Some kind of Chrome/Firefox add-on might do the trick, but I couldn't find one for this purpose.

  Read the article

< Previous Page | 677 678 679 680 681 682 683 684 685 686 687 688  | Next Page >