Search Results

Search found 19009 results on 761 pages for 'network shares'.

Page 682/761 | < Previous Page | 678 679 680 681 682 683 684 685 686 687 688 689 | Next Page >

VPN sharing on Mac OS X 10.5 machine

- by Jens

I have a rather weird problem. I want to share a VPN connection that has been established by my Mac OS X 10.5 computer with another machine in my network. This is what I did: In the /etc/hostcongig file on the main computer I added the line: IPFORWARDING=-YES- I assigned a fixed IP address to my computer (192.168.178.30), a fixed one to the other machine (192.168.178.60) and my computer's IP address as gateway on the other machine. I connected to my VPN using the internal Mac OS X VPN client (PPTP connection) I run this script: #!/bin/sh natd -same_ports -use_sockets -unregistered_only -dynamic -interface ppp0 -clamp_mss ipfw -f flush ipfw add divert natd ip from any to any via ppp0 ipfw add pass all from any to any sysctl -w net.inet.ip.forwarding=1 Source: Using (and sharing) a VPN connection on your Mac Now everthing works smootly, however speed is an issue. I get 1,8 MBit/s on my main machine and only 0,3 - 0,6 MBit/s on the other one. My question: What could possibly be wrong? Do I have to tweak MTU settings, is there any packet inspection ongoing that needs time....? Any help appreciated!

Read the article
DNS resolve .com domain on local domain

- by Joost Verdaasdonk

I'm building a local 2008 R2 domain as a test case to be able to write a roadmap for the real new domain that needs to be created soon. What I would like to know if I'm able to make a record in DNS that will point the domain name: www.example.com and example.com to one of the servers in my network. I tried creating an a-record for it but that doesn't work. To be honest I'm not even sure if this is possible? So can I do this? That way I would be able to fully test all our services (and webb app) offline before I build the real domain and switch the DNS records at the provider. Some advice if possible and where to start is appreciated. The solution (Thanks Brent): Create new Forward lookup zone pointing to example.com Create empty A record pointing to IP of the webserver you are targeting If www is needed create A record with Name: www and IP of your webserver sub domains repeat the process but then with names for example: sub or www.sub (and ip your webserver) Be aware of the DNS Cache while you are in this process. Things can take time or do the following: Right click the server and choose clear cache in CMD: ipconfig /flushdns (to flush the client cache)

Read the article
secure user-authentication in squid

- by Isaac

once upon a time, there was a beautiful warm virtual-jungle in south america, and a squid server lived there. here is an perceptual image of the network: <the Internet> | | A | B Users <---------> [squid-Server] <---> [LDAP-Server] When the Users request access to the Internet, squid ask their name and passport, authenticate them by LDAP and if ldap approved them, then he granted them. Everyone was happy until some sniffers stole passport in path between users and squid [path A]. This disaster happened because squid used Basic-Authentication method. The people of jungle gathered to solve the problem. Some bunnies offered using NTLM of method. Snakes prefered Digest-Authentication while Kerberos recommended by trees. After all, many solution offered by people of jungle and all was confused! The Lion decided to end the situation. He shouted the rules for solutions: Shall the solution be secure! Shall the solution work for most of browsers and softwares (e.g. download softwares) Shall the solution be simple and do not need other huge subsystem (like Samba server) Shall not the method depend on special domain. (e.g. Active Directory) Then, a very resonable-comprehensive-clever solution offered by a monkey, making him the new king of the jungle! can you guess what was the solution? Tip: The path between squid and LDAP is protected by the lion, so the solution have not to secure it. Note: sorry for this boring and messy story! /~\/~\/~\ /\~/~\/~\/~\/~\ ((/~\/~\/~\/~\/~\)) (/~\/~\/~\/~\/~\/~\/~\) (//// ~ ~ \\\\) (\\\\( (0) (0) )////) (\\\\( __\-/__ )////) (\\\( /-\ )///) (\\\( (""""") )///) (\\\( \^^^/ )///) (\\\( )///) (\/~\/~\/~\/) ** (\/~\/~\/) *####* | | **** /| | | |\ \\ _/ | | | | \_ _________// Thanks! (,,)(,,)_(,,)(,,)--------'

Read the article
Login failed for user 'XXX' on the mirrored sql server

- by hp17

Hello, We have 4 web servers that host our asp.net (3.5) application. Randomly, we get error messages like : 1) "Login failed for user 'userid'" 2) "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" we are running sql2005 and have a principle and a mirror db (sync). When these exceptions are thrown, I look at the SQL error logs on the mirrored db and noticed the failed login messages in there. The principle db is running fine and the other web apps are working great. this will happen for maybe 10 min, then the app pool recycles and it starts hitting the principle db again. Is there a configuration I have incorrect? my theory is that our principle db is forwarding the request to the mirror, but that should never happen. any help??

Read the article
OpenVPN + iptables / NAT routing

- by Mikeage

I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

Read the article
Things to check for an internet-facing email server.

- by Shtééf

I'm faced with the task of setting up a public-internet-facing email server, that will be relaying mail for all of our other servers in the network. While the software in itself is set up in few keystrokes, what little experience I have with managing an email server has thought me that there are tons of awkward filtering techniques employed by other email systems. Systems that my own server will inevitably interact with a some point. Hence, my questions: What things should be kept in mind and double checked when setting up an email server? What resources are available for checking if my email server is set-up correctly? I'm specifically NOT looking for instructions for any given mail server, such as Exchange or Postfix. But it's okay to say: “you should have X and Y in your set-up, because when talking to server software Z, it typically tries to weed out open relays by checking for these.” Some things I've discovered myself: Make sure forward and reverse DNS are set up. Mail servers tend to do a reverse lookup for the peer IP-address when receiving. Matching a reverse look up with a follow-up forward lookup is probably employed to weed out open relays run through malware on home networks. Make sure the user in the From-address exists. The From-address is easily spoofed. A receiving mail server may try to contact the mail server in the From-domain, and see if the From-user actually exists.

Read the article
pptp server 2003 hands out gateway from nic not dhcp server

- by Pete

I have created a pptp RRAS server for a handful of clients to connect to. I would like them to use the servers default gateway (.1) for internet access. They are able to successfully connect (& see LAN) but it then cuts them off the internet. I understand that all internet traffic would be routed through the pptp server but that's ok since I have enough pipe. The problem seems to be that: the clients gateway shows as their assigned RAS ip. The clients assigned DNS settings seem to be what is set to the servers nic not what I have specified in dhcp (which is the same server). DHCP relay agent properties points to the nic DHCP is running on (192.168.100.163). .1 is gateway in nic hw properties & dhcp. I have different dns secondary & third entries on my nic properties than what dhcp is configured for. The problem is that I have a 10.10.1.x network that people can not see if they uncheck the gateway option but, they are then unable to see our other hosted sites on the internet.

Read the article
can't get to admin page after factory reset netgear wg602

- by stefanB

I have wireless Netgear wg602 on my home network (connected to my internet modem/router). I've had it secured and locked down to only accept connection from specific MAC addresses. I've forgotten the password that I used but my Mac Book laptops can still connect (multiple OS updates - it can't retrieve and display the password but it can use it to log in to WPA) so I want to reconfigure it from scratch (have some new devices). I tried to reset the Netgear wg602 to factory settings (pressed reset button for 10 sec), reset my laptop IP address to local address suggested in manual (192.168.0.210 net mask 255.255.255.0), connect Netgear via ethernet cable to my mac book pro but I can't get to the admin page at 192.168.0.227 as suggested by manual (firefox or safari). At this stage the Netgear is not connected to router, it is only connected to mac book. I can't ping the wireless access point either (but it is on all lights are on). What am I doing incorrectly? Last time I configured it via Windows now I only have Mac Book (which I've used with the wireless access point for 2 years so no compatibility problems).

Read the article
Can't access random web pages on my MacBook Pro 2012?

- by Faruk Sahin

Sometimes I can't access random web pages. The page simply doesn't load. If I wait for around a minute doing nothing, it will load. It happens very random and very intermittent. Sometimes it starts when I try to access youtube.com or cnn.com. When it starts, it happens once in a minute or once in 5 minutes for random web pages. But if I am downloading something, the download continues without any interruption. And also I am able to ping the address I can't browse. Then if I wait for around a minute, everything starts to work fine at the browser side also. I have tried a lot of different browsers. I have tried changing my DNS servers to Google's public DNS servers. Using a cable instead of the wireless connection doesn't work either. No one else in the network has this problem, but me. What can be the problem?

Read the article
Unable to set initcwnd on a Hetzner server

- by Sergi

We just ordered a bunch of Hetzner EX40SSD servers with the minimal Debian install image that they provide and everything is just fine except that looking at tcpdumps for fine tuning the network from various locations the initcwnd param seems to be stuck at 6 no matter how we change it. By default Debian 3.2 kernels should have that setting to 10 so it's pretty strange. Is it possible that the NIC driver or a custom setting in the Hetzner Debian image is limiting this param? Even if we set it to 4, like the old kernel default, it doesn't work. Any ideas would be much appreciated! Does anyone know if the NIC drivers provided by default by Debian have some kind on limitation. In a long thread in http://www.webhostingtalk.com/showthread.php?t=1200617&highlight=hetzner they talk about a page http://wiki.hetzner.de/index.php/Installation_des_r8168-Treibers/en where Hetzner states that the included Realtek r8168 driver is not working properly, but nowhere do they say that the initcwnd could be affected. Tomorrow i will try to install a CentOs image and see if Debian is the problem...Last resort would be to install a custom debian image, but that is a pain in the ass! Thanks!

Read the article
Is there a standard method for assigning nameservers to servers in a Windows domain?

- by HopelessN00b

As the title asks, I'm wondering if there's any standard or "best practice" for how to actually assign nameservers (DNS) and manage the nameserver configuration for client servers on a Windows domain. I'm talking about the setting circled in the below image, in case the language of the question is not clear enough: This is for a large, multi-site environment, where ideally/hopefully all servers point at their site's Domain Controller as the primary DNS server, and a DNS server at a different site as the secondary DNS server. For simplicity's sake, we can say that the secondary server would be the Domain Controller at the home site for everyone, and there are no tertiary DNS servers (even though that's not actually the case). Try as I might, I can't seem to find a GPO setting for this (at least on FL 2003 R2, the Computer Configuration - Administrative Templates - Network - DNS Client - DNS Servers GPO is Supported on: Windows XP Professional only), and I find it rather hard to believe that the "best"/"standard" solution would therefore be either scripting up something to apply the DNS settings per site, or using a DHCP server to push those configurations out to the other servers via the DHCP Scope Options. So, is there a standard way of managing this configuration? (That's hopefully not "a script" or "DHCP Scope Option.)

Read the article
Old scheduled task still being started, but can't find it.

- by JvO

System: Windows XP Home Summary: Some scheduled task is still being started by Windows, but I can't find it, nor determine where its configuration has been stored. This is turning into a mystery for me... I set up a Windows XP Home machine to run a task at 7:00 AM, using the Task manager. This was a clean install, no users defined, so you got straight to the desktop after starting the machine. The filesystem uses NTFS. Later on, I needed to introduce users, so I created one (named Sam) with administrator privileges. After this I noticed that the scheduled task failed, most likely due to privilege errors (i.e. can't write to a network drive). So I want to delete the old task, and add it again with the correct user credentials. However.... I can't find the old task!! I know it is still being executed at 7:00 AM, but there's no mention anywhere on the system of this task. I've looked in c:\windows\tasks for .job files, but there's only the "MP Scheduled Scan.job" from Security Essentials. I've searched the whole disk for mention of the batch file that is being run, but can't find it. So why is this old task still running, and more importantly, why can't I find it? Would it have something to do with introducing users on XP?

Read the article
Symantec Antivirus Corporate -- two problems

- by Alex C.

We have a Windows network with a domain and about 50 clients. A few months ago, we installed Symantec Antivirus, Corporate Edition ver. 10.1.8.8000. There are two problems. The larger problem is that the software isn't very good at stopping viruses. In the last month, four different machines have become infected with those viruses that masquerade as antivirus software. Two machines I was able to clean with MalWareBytes. The other two were hopeless, and I had to reinstall Windows. Is there something I can do to make the Symantec product more effective? As far as I can tell, it successfully updates definitions nightly and pushes the definitions to the clients. The smaller problem is that the Symantec client applications sometimes initiate scans at random (and inappropriate) times. One of my co-workers complained to me yesterday that her computer was running very slow. I looked at the scan history and found that Symantec had scanned the computer three times during the past two days, and each time during the workday. No threats were found. Not sure why it's doing this, but I'd like it to stop. Any help would be appreciated. Thanks.

Read the article
trying to route between two openvpn clients

- by user42055

I have two openvpn clients on the 10.0.1.0 (client1) and 192.168.0.0 (client2) subnets with the server's openvpn connection having the ip 192.168.150.1 The server has ip forwarding enabled. Currently, client1's vpn ip is 192.168.150.10 and the P-t-P ip is 192.168.150.9 I have created the following static route on client1: route add -net 10.0.1.0 netmask 255.255.255.0 gw 192.168.150.9 The routing table on client1 looks like this: Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.150.1 192.168.150.9 255.255.255.255 UGH 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 I thought this would be correct to allow traffic from client1 to reach computers on client2's network, but it does not work. Is 192.168.150.9 (the P-t-P address) the correct one to be routing through ? I tried using 192.168.150.1 but I couldn't create the route. I hope this is clear.

Read the article
Restrict Computer or Users from Internet but allow access to intranet and Windows Update / ePO?

- by MoSiAc

So this may be impossible but I've been asked to try and find something about it. So far nothing I have found is possible. I need to restrict specific machines or user accounts from regular Internet access but let them have access to the intranet portion of our network. I do not have Active Directory control, nor does anyone at my local workplace (corporate control in a different state). I have tried going through IPsec and doing this per local machine, but that system seems to have been removed from the images that are installed on these machines so that is out. So far the only other option I can think of is assigning the machines a specific ip address and removing their gateway access. This would probably work but the machines need to be able to receive updates that are being pushed to them through ePO and LanDesk. I would really like to do this on the user level because then if I need to do tech work to the machine and need internet access I can get to it but a "special" user could login and not be able to get into anything.

Read the article
Alfa AWUSO36H 1W dysfunctional driver

- by BrainStorm

I recently purchased an Alfa AWUSO36H 1W wireless USB adapter for my notebook, in order to improve signal strength and quality. I'm currently using Linux Mint 11, and the it uses the RTL8187 driver for this adapter, I'm also using a 4dbi antenna, though I have others. The problem is that this adapter does exactly the opposite of what it should, actually my internal Broadcom BCM4313 adapter works way better than the alfa. Browsing is slow, some network applications don't even work, pings against Google.com on the internal adapter runs smooth, while in the alfa it gets like 25% packets lost or more! I'm less them 50 feet from my AP, the internal adapter gets 44/70 link quality, and the alfa gets around 60/70 (iwconfig output). Also the system always sets alfa power to 20dbm(100mw), then I have to do sudo iw set reg B0 to make it 30dbm(1000mw), but apparently no significant change. I've installed wireless-compat drivers, no change either. And worst of all, in Windows 7 it works way more smoothly for browsing, though I couldn't test it properly there. I hope its a driver problem, even if it's a pain to find/compile Linux drivers for a starter, I prefer it to a hardware problem where I would need to buy another adapter, since I have no money left (except for the cantenna pieces).

Read the article
bond0:0 + define virtual IP

- by yael

in my Linux server I have the following: Linux Version - RedHat-Linux- 5.3.0.0 (this Linux server only only one LAN) more /etc/sysconfig/network-scripts/ifcfg-bond0:0 DEVICE=bond0:0 ONBOOT=yes BOOTPROTO=static IPADDR=10.10.10.12 NETMASK=255.255.255.0 ifconfig -a bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) bond0:0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:10.10.10.12 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr 00:0E:0C:C7:F8:92 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec7:f892/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8600 errors:0 dropped:0 overruns:0 frame:0 TX packets:4764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:717979 (701.1 KiB) TX bytes:598620 (584.5 KiB) Memory:b8820000-b8840000 my problems: why I get HWaddr 00:00:00:00:00:00 and not the real MAC address I cant ping to other server with 10.10.10.11 from my server is it possible to define bond0:0 when I have only one LAN (eth0) other info: more /etc/modprobe.conf alias eth0 e1000e alias eth1 e1000e alias eth2 e1000e alias eth3 e1000e alias scsi_hostadapter mptbase alias scsi_hostadapter1 mptsas alias scsi_hostadapter2 ata_piix alias bond0 bonding alias bond1 bonding

Read the article
Can't ping localhost/or reach locally hosted domain

- by Ian

I can't reach a locally hosted domain, and in testing I have discovered I can't ping localhost or the actual IP either. OS is Windows7 64bit, Pro. DNS works, I can ping others on my network, they can ping me, and they can reach the hosted domain. The ONLY problem I have found is that I can't reach the locally hosted domains! C:\Users\ianipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : leda Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hcs Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hcs Description . . . . . . . . . . . : Atheros AR8121/AR8113/AR8114 PCI-E Ethern et Controller Physical Address. . . . . . . . . : 00-23-54-7C-E2-2A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.12(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VirtualBox Host-Only Network #2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter #2 Physical Address. . . . . . . . . : 08-00-27-00-88-4A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Autoconfiguration IPv4 Address. . : 169.254.205.215(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : NetBIOS over Tcpip. . . . . . . . : Enabled C:\Users\ianping localhost Pinging leda [127.0.0.1] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\Users\ianping coachmaster.leda.hcs Pinging coachmaster.leda.hcs [192.168.0.12] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.0.12: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\Users\ian I can reach a hosted VM in VirtualBox and the VM can browse the hosted sites. I've removed Zone Alarm and disabled Windows Firewall - same results. So how can I browse my locally hosted sited? What could be blocking it? Thanks Ian

Read the article
Not able to connect to port different than 22 - OpenVPN

- by t8h7gu

I have OpenVPN network with 5 clients. Computer with Arch Linux which hosts OpenVPN server, It also hosts virtual machine with Computer with CentOS which is also connnected to OpenVPN subnet. Windows 8 which hosts virtual machine with CentOS. Both of them are connected to OpenVPN. Last one machine is virtual machine with CentOS which is hosted by computer with Ubuntu 14( which is not connected to OpenVPN. All machines in OpenVPN subnet are bolded. All phisical computers are in different networks. The problem is that when I use nmap to scan Windows and it's guest virtual machine it's saids that host seems down. When I force namp to scan specific port it shows filtered state: nmap -Pn -p 50010 n3 Starting Nmap 6.46 ( http://nmap.org ) at 2014-06-07 19:49 CEST Nmap scan report for n3 (10.8.0.3) Host is up (0.11s latency). rDNS record for 10.8.0.3: node3.com PORT STATE SERVICE 50010/tcp filtered unknown Telnet also cannot connect to this port telnet n3 50010 Trying 10.8.0.3... telnet: Unable to connect to remote host: No route to host But ss on this host show's proper state of this port ss -anp | grep 50010 LISTEN 0 50 10.8.0.3:50010 *:* users:(("java",12310,271)) What might be possible reason of that and how to fix it? EDIT I've found that I am able to connect via telnet to ssh port: telnet n3 22 Trying 10.8.0.3... Connected to n3. Escape character is '^]'. SSH-2.0-OpenSSH_5.3 So it seems that it's not problem with Windows firewall. But I have no idea what it might be. Also nmap result for first thousand ports: nmap -Pn -p 1-1000 n3 Starting Nmap 6.46 ( http://nmap.org ) at 2014-06-07 20:08 CEST Nmap scan report for n3 (10.8.0.3) Host is up (0.49s latency). rDNS record for 10.8.0.3: node3.com Not shown: 999 filtered ports PORT STATE SERVICE 22/tcp open ssh Nmap done: 1 IP address (1 host up) scanned in 77.87 seconds

Read the article
Computer slow after installing 32GB RAM

- by John Gilmore

I'm currently running very large network simulations for my PhD research, for which I need lots of RAM. I have a Core i7 2600K processor with a Gigabyte GA-Z68AP-D3 motherboard, running Windows 7 professional 64bit. I bought the system with 8GB (2x4GB) DDR3 1600 MHz Corsair Vengeance RAM and the system ran like a dream. I'm planning to upscale my simulations so I removed the 2x4GB RAM and installed 4x8GB DDR 1600 MHz Corsair Vengeance RAM. When I rebooted the system, boot time was much longer than usual (10 mins just to get to login screen). After logging in, the whole system was unresponsive. I tried playing some games (Bioshock 2), but it was unplayable. I've not had this problem before and I have an ATI Radeon HD 5850 graphics card, so that's not the problem. The only thing that's changed is the RAM. I've looked through the specifications of Windows, my motherboard and my CPU and they all state that 32GB of RAM is supported. Does anyone have an idea of what's going on? Any help would be greatly appreciated.

Read the article
SSH Connection Error : No route to host

- by dewbot

There are three machines in this scenario: Desktop A : [email protected] Laptop A : [email protected] Machine B : [email protected] All the machines have Ubuntu 11.04 (Desktop A is a 64bit one) and have both openssh-server and openssh-client. Now when I try to connect Desktop A to Laptop A or vice-versa by ssh [email protected] I get an error as port 22: No route to host in both the cases. I own both the machines, now if I try same commands from my friend's machine, i.e. via Desktop B, I can access both my Laptop and Desktop. But if I try to access Desktop B from my Laptop or by Desktop I get port 22: Connection timed out I even tried changing ssh port no. in ssh_config file but no success. Note: that 'Laptop A' uses WiFi connection while 'Machine A' uses Ethernet Connection and 'Machine B' is on an entirely different network. Laptop A && Desktop A - Router/Nano_Rcvr provided to me by ISP. So to one Router two Machines are connected and can be accessed at the same time. here is my ifconfig output for both the machines :- Laptop wlan0 Link encap:Ethernet HWaddr X:X:X:X:00:bc inet addr:1.23.73.111 Bcast:1.23.95.255 Mask:255.255.224.0 inet6 addr: fe80::219:e3ff:fe04:bc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:108409 errors:0 dropped:0 overruns:0 frame:0 TX packets:82523 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44974080 (44.9 MB) TX bytes:22973031 (22.9 MB) Desktop eth0 Link encap:Ethernet HWaddr X:X:X:X:c5:78 inet addr:1.23.68.209 Bcast:1.23.95.255 Mask:255.255.224.0 inet6 addr: fe80::227:eff:fe04:c578/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10380 errors:0 dropped:0 overruns:0 frame:0 TX packets:4509 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1790366 (1.7 MB) TX bytes:852877 (852.8 KB) Interrupt:43 Base address:0x2000

Read the article
XP box with 3 NICs on Server 2003 Domain

- by Hannibal

I have assigned all three NICs IP addresses that are outside the DHCP pool. I have 2 NICs are connected to 1 switch and the 3rd to my second switch. I want to assign one of the two NICs on the 1st switch to "normal" network activity (e.g. internet access, RDP, etc.) The other two NICs I want to reserve for mirroring ports on their respective switches. While this machine is connected to the domain I can access the internet and Remote Desktop. I have no idea which NIC I am using until I start mirroring a port, at which time, if I happen to be connected through one of the NICs I have dedicated to mirroring, I lose my remote desktop. I am aware that I would have more control over the NICs using Linux. I want to explore Windows solutions before I go that route because reinstalling another OS would be inconvenient (but not impossible). I would likely use a version of Backtrack (3 or 4 not sure). I would also have to learn how to access the machine remotely but I've done it before so this would be a minor obstacle. Thank you for your assistance.

Read the article
Does migrating 2 domain controllers between 2 datacentre requires both virtual machines to be shut down at the same time?

- by Imagineer

I was attempting to migrate 2 virtual machines that are domain controllers between 2 datacentres running ESX 3.5 and ESX 4.1. I was advised to shut down both domain controller at the same time during the migration process. This is to avoid USN Rollback and other replication issues. The following are the steps that I was planning to perform: 1. Shutdown both DC. 2. Copy both VMs files across to new datacentre using Veeam FastSCP (connection to both vCentre through IP address instead of hostname) 3. Power them up at new datacentre. 4. Configure Network interface/DNS/DHCP for both DCs in new datacentre I have tried to use Veeam FastSCP rather than VMware Standalone Converter is because its copying rather than converting. Someone also suggested that I use backup and restore app like Veeam backup and replication software. Sounds like a simple job, but after shutting down both DCs, the transfer rate using FastSCP is so slow registering only 1KB/s as oppose to the normal 1MB/s (or more). When that attempt to transfer failed, I tried to cold clone both DCs resulted in the both ESX hosts get disconnected. I have tried troubleshooting by referring to this - VMware KB - Diagnosing an ESX Server that is Disconnected or Not Responding in VirtualCenter It seems that the DNS being down is the caused of all unusual occurrence. The moment I powered up the DCs via VMware console command, the ESX host were able to connect to the vCentre again. How can I avoid such a pitfall again? Am I doing it correctly? Any help would be greatly appreciated! Thank you.

Read the article
Two internet connections at once in Windows 7

- by webmasters

I have a 3G wireless modem and I have a LAN - Right now they are both connected. I need a way to choose which applications will use the 3G connection and which applications will use the LAN. My Operating System is windows 7. How can I do this? Any ideas? Here is a route print: - the 3G modem's IP is 10.81.132.96 Lets say, for example, map google.com to using the 3G internet connection. IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.102 20 0.0.0.0 0.0.0.0 10.81.132.97 10.81.132.111 286 10.81.132.96 255.255.255.224 On-link 10.81.132.111 286 10.81.132.111 255.255.255.255 On-link 10.81.132.111 286 10.81.132.127 255.255.255.255 On-link 10.81.132.111 286 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.2.0 255.255.255.0 On-link 192.168.2.102 276 192.168.2.102 255.255.255.255 On-link 192.168.2.102 276 192.168.2.255 255.255.255.255 On-link 192.168.2.102 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.2.102 276 224.0.0.0 240.0.0.0 On-link 10.81.132.111 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.2.102 276 255.255.255.255 255.255.255.255 On-link 10.81.132.111 286 ===========================================================================

Read the article
IP to IP forwarding with iptables [centos]

- by FunkyChicken

I have 2 servers. Server 1 with ip 1.1.1.1 and server 2 with ip 2.2.2.2 My domain example.com points to 1.1.1.1 at the moment, but very soon I'm going to switch to ip 2.2.2.2. I have already setup a low TTL for domain example.com, but some people will still hit the old ip a after I change the ip address of the domain. Now both machines run centos 5.8 with iptables and nginx as a webserver. I want to forward all traffic that still hits server 1.1.1.1 to 2.2.2.2 so there won't be any downtime. Now I found this tutorial: http://www.debuntu.org/how-to-redirecting-network-traffic-a-new-ip-using-iptables but I cannot seem to get it working. I have enabled ip forwarding: echo "1" > /proc/sys/net/ipv4/ip_forward After that I ran these 2 commands: /sbin/iptables -t nat -A PREROUTING -s 1.1.1.1 -p tcp --dport 80 -j DNAT --to-destination 2.2.2.2:80 /sbin/iptables -t nat -A POSTROUTING -j MASQUERADE But when I load http://1.1.1.1 in my browser, I still get the pages hosted on 1.1.1.1 and not the content from 2.2.2.2. What am I doing wrong?

Read the article

< Previous Page | 678 679 680 681 682 683 684 685 686 687 688 689 | Next Page >