Search Results

Search found 22968 results on 919 pages for 'stuck again'.

Page 682/919 | < Previous Page | 678 679 680 681 682 683 684 685 686 687 688 689  | Next Page >

• Windows Server 2008 - RAID 5 Fails on Reboot

  - by Adam

  Hey, I've got an install of Windows Server 2008 Enterprise. It's running software RAID-5 with five disks. The disks were originally formatted under Windows Server 2003, but came up fine once I installed Windows Server 2008. The issue I'm having is that every time I reboot the server, the RAID comes up with a "Failed Redundancy" - the data stays available. I have 4 disks on a PCI SATA controller, and one of the disks connected to the motherboard's on-board SATA ports. (The other on-board port has the system disk connected.) I was having Disk #4 fail consistently, so I tried swapping the cables on the controller end. I swapped the on-board RAID disk with one on the PCI controller. Same issue now, expect with disk #1. Once the system's up, I can reactivate the RAID, it will resync for a while, then go to "Healthy", and will stay that way for an indefinite amount of time - until I reboot. As soon as I reboot, the disk drops again. I've ruled out disk + cable with the recabling. I don't believe it would be the controller as it seems to work fine most of the time - only failing on reboot, and the other port on the same controller connects the system disk - which is clearly working. I did look in the event log, but didn't see anything particularly relevant (although I didn't know what I was looking for - just looked for anything with a "Warning" or "Error" symbol that looked disk-related :)). I'm not particularly familiar with RAID on Windows, does anyone have any idea why this might be doing this? Any idea how to fix it? Any suggestions appreciated! -- Adam

  Read the article

• Thunderbird: export email account settings

  - by zpea

  I'd like to create a new profile for Thunderbird using the same mail accounts I already configured in my old profile. As it is quite a number of accounts, it would be great to have a way to export/import them instead of writing down the settings just to fill in again in the new profile. Using web search and search here I mainly found following suggestions that do not match what I need: Copy the whole profile: Not possible for me as I don't want to copy other settings, the downloaded mail data etc. and the old profile broke when running out of space in the home folder anyway. Use mozBackup: There seem to be several programs by that name (forks?). In any case, it's Windows-only and hence no option (I am mostly on Linux and prefer platform-independent solutions anyway) Use accountex: Seems to do what I want, but it is not compatible with current Thunderbird version (supports only up to version 3.1) Posts with various tips from 4 years ago: Top results in the web search with the G. But they do not work in current versions of Thunderbird either. Did I overlook anything? After all, it doesn't sound like I was looking for something nobody ever looked for.

  Read the article

• Load balancing with puppet

  - by Gonçalo Queirós

  Hi there. Im trying to setup a loadbalancing system. My load balancer (nginx) has a conf file where i should list all IP's of the upstream servers. I could put the IP's on the conf manually, but this ways i would need to change the conf file every time i add/remove an upstream server. For now i came up with two different ideas, but i don't like much of neither: 1 - Have every upstream machine to use Exported Resources to create a file with it's IP..Then the load balancer server will have an "include conf_directory/*", and load all the files created by the upstrem servers. Since the load balancer is using nginx this can be done, but if i wan't latter on to configure something that doesn't have the "include" on the conf files, this solution will not work. 2 - If the config doesn't support the "include" command, then we could have again, every upstream server use the Exported Resources to create a filw with its IP, and latter on, the load balancer execute a command that would pick every file and generate the config Both versions addopt the same techinque, the difference is that version 2 is used when the server (that needs to have a conf generated) doesn't recognize a command like "include" inside its own conf. Now, my question is, is there any way to do this in a different form? I suspect that there is, since puppet is made to manage multiple servers, it seems a bit strange not have a easy way to configure load balancers.

  Read the article

• Can I use @import to import Kod's default style sheet into my own?

  - by Thomas Upton

  I understand that Kod is being actively developed and is prone to drastic changes in any area. I would like to modify some small things (like font face and size or certain colors) while still being able to benefit from any changes or updates to the default Kod stylesheet. I thought that I would be able to @import the default stylesheet into my own to achieve this. This is what ~/.kod/custom.css would look like, @import url("file:///Applications/Kod.app/Contents/Resources/style/default.css"); /* Change the default font face and color. */ body { font-family: Menlo, monospace; color: #efefef; } This stylesheet was set with the following defaults command, per the comments at the top of Kod's default CSS file: defaults write se.hunch.kod style/url ~/.kod/custom.css Unfortunately, this didn't work. When I first tried to reload the style, Kod crashed. It opened fine again, but the @import statement wasn't working, and Kod crashed every time I saved the custom.css file. Am I doing something wrong? Did I write my @import statement wrong? Is that not how @import is supposed to work? Did I miss some sort of documentation or Kod Google Groups post that mentions that Kod explicitly disallows this?

  Read the article

• Strange issue ! Local network cache of PHP and Apache2 on Win Server 2008 R2

  - by Ahmed Benlahsen

  Software configuration : I have a new Server with windows server 2008 R2 installed via VMWare. I have installed Apache2.2, PHP5.2 and MySQL5.5 as separated packages. Issue : On my first installation of my application all works great. When I updated some JS and CSS files then I access to my application again from a PC on local network I get the old JS and CSS versions! But when I access to the same application on local server I got the latest versions of those files! Link of my application on local server is : http://localhost/BADIL Link of my application from local network is : http://LOCAL_SERVER_IP/BADIL I never had this kind of issue! I think that there are some cache but I don't know where! Maybe on Win Server 2008 R2 or on VMWare ! The question is : Why when I access to my application on the server all works fine, but when I access to the same application from a local network I have the old version of JS and CSS files?? Any one can help me please?! Regards.

  Read the article

• Someone from china wants kill my entry bandwidth??

  - by yes123

  Hi guys. Someoen from china with two different ip is downloading the same big file from my server. Their ip are: 122.89.45.210 60.210.7.62 They requesting this file and downloading more than 20 times per minute. What Can I do to prevent this? (I am on gentoo with root access) And WHY they do this to a site that doesn't have nothing to do with china ? ADD1: Other ips: 221.8.60.131 124.67.47.56 119.249.179.139 60.9.0.176 ADD2: the stupid thing is they are requesting only 1 single file lol. Or they want that file removed (tho i don't see why) Or they are pretty stupid ADD3: Situation is getting worse. IP are spreading from other countries too (usa and korea if www.geobytes.com/iplocator.htm it's right) And now they are requesting another file. ADD4: it seems after they realized i removed that file they stopped attacking me. I will monitor the situation. They started again after a sleep of 3-4 mintues with the same file (lucky me). Hard to say why this is happening

  Read the article

• Second monitor stopped being recognized by Windows

  - by Eric J.

  One of the developer PC's running Windows Vista Ultimate had the second monitor stop being recognized in Windows overnight. There were no hardware or driver changes at the time, though I have subsequently updated to the latest nVidia drivers (card is NVIDIA GeForce 210). The non-recognized monitor IS recognized during the boot sequence. In fact, only the "bad" one shows the POST or the Windows loading screen. At some point during Windows initialization after the loading screen disappears and before the logon screen appears, the active monitor switches. Any thoughts? UPDATE: When I open the Vista monitor properties window, I see my primary display and secondary display depicted. The primary one is portrayed as the regular blue box, but the secondary one is portrayed greyed-out. I have the option to "Extend desktop to this monitor", the only resolution is 800x600, and all of the advanced monitor properties are greyed out as well. If I opt to extend the desktop, the greyed-out box turns blue, when I then select Apply the screens flash as usual and I'm given the 15 second countdown to accept the new settings and when I do, everything returns to the previously broken state... secondary monitor is portrayed greyed-out again. At no point is the desktop shown on the secondary monitor.

  Read the article

• Winamp has slow /skipping video playback on Windows 7

  - by Roy Rico

  Hello, I have Windows 7 x64 (7600 90-day trial version) and Winamp 5.6 installed. When I play a video in Windows Media Player, the video plays smooth, however when I play a video in winamp, the video is mostly ok when played back at the original size (but not completely), but if I play it back in fullscreen, the playback gets really slow. The video's audio track plays just fine. I have a DELL XPS 420 computer (8GB of RAM) with a Nvidia GeForce 8800 CTS 512 video card. I've updated to the latest drivers. I have the default Windows 7 codecs, and the CCCP codec pack which used to be all I needed under Windows XP to play all types of videos. Are the codecs needed for Windows Y the same? What's going on? UPDATE: As suggested, I turned off Aero and winamp ran just fine again. So I just have to wait for winamp to be rewritten to work with the way Vista/Windows 7 runs? UPDATE 2: Winamp has updated their player, and it works great with Windows 7 now.

  Read the article

• Error: could not create the Java Virtual Machine. Error: A fatal exception has occurred. Program will exit

  - by Gleeson9

  Pre-note: This is not a problem I am having with Minecraft. All answers I can find seem to be Minecraft issues. Error: could not create the Java Virtual Machine. Error: A fatal exception has occurred. Program will exit. I get this error when I try to do something Java related. I cannot launch a .jar without this error coming up and when I try to install JDK, I get this error. This has been plauging me for a while and I was not able to research an answer so I thought I would ask it myself. EDIT: Windows 7 (x64) Dell Studio Laptop, 4GB RAM, external Radeon HD 6950 Graphics Card. I have tried uninstalling all JVMs and reinstalling but it didn't work, although I cannot remember how thorough I was so I may try again. Here is a list of all the Java related things I have installed (found in the uninstall or change programs window): Java 3D 1.5.1 Java 3D 1.5.1 (x64) Java 3D 1.5.2 Java 6 Update 30 Java 6 Update 30 (64-bit) Java 7 Update 2 Java 7 Update 3 (64-bit) JavaFX 2.0.3 (64-bit) JavaFX 2.0.3 SDK (64-bit)

  Read the article

• Permanent fix for unicode characters not displaying correctly (as boxes)

  - by Chase

  Please read this entire message before replying. First I know how to fix the issue on a temporary basis. I am looking for a permanent fix. I work with foreign language files a lot. Unfortunately sometimes all the unicode characters in windows explorer, notepad, and other places (as rendered by windows, probably GDI) do not display correctly. That is they display as square blocks, where as they had just been displaying correctly. There are countless methods to temporarily correct the issue. But again, I want a way to permanently resolve the issue. What I have tried: The silly "Hide fonts based on language settings". This setting only applies to what fonts you see in the fonts folder and font dropdowns. It doesn't disable foreign fonts (doesn't work, or if it does, it is temporary). Deleting the font cache file and rebooting (works.. usually, temporary solution). Changing my locale and then back (sometimes works, temporary solution). Rebooting my PC and getting lucky (50-50 chance, temporary solution). Changing my keyboard input/adding foreign keyboard (temporary solution that only seems to work once). Reinstalling windows (temporary solution, sometimes lasts a few months though, I have done this 7 times across 3 computers) What I have not tried: Buying Windows Ultimate and installing the interface packs. This is not a solution. I can't read Japanese/Chinese and I do not want my interface in those languages. What I will not do: Switch to a different brand operating system (unix, linux, mac os x) Switch to an older version of windows (Windows Vista, XP, 2000, etc). So can anyone recommend a permanent fix for the problem?

  Read the article

• How to see the properties of a DOM element as they change in realtime?

  - by allquixotic

  JavaScript code can update the properties/attributes of DOM elements in real time by responding to events and so on. Here is an example. In the table on that page, move your mouse over the cells. Notice how they change color when the mouse is on them, and the color goes away when you move the mouse to another cell. Now, using Firefox or Chrome (but not IE, Opera, etc.), I want to examine the background color, expressed in RGB or hex or whatever, of the cells updated in real time, as the mouse cursor enters and leaves the region and causes the JS to do its thing. The behavior that I observe, currently, is that the Inspect Element functionality of both Firefox and Chrome does not update the value of the properties as they are updated by JavaScript. So, in order to view the latest value of the property, I have to inspect the element again, and it takes a momentary "snapshot" of the values. But since the values only change while I have the mouse on them, I can't take a snapshot of the value I want while my mouse cursor is over the cell, because I have to remove my mouse from the cell to select the "Inspect Element" item in the right-click list! If it is possible to have the values updated in real time using either Firefox or Chrome, or an extension, on any recent version of the software (up to the latest stable), please provide instructions for doing so.

  Read the article

• How to correctly deploy Adobe Reader 9.1

  - by Ben Gillam

  Hi I have recently tried to deploy Adobe Reader 9.1 onto our network here. (SBS 2003 server and XP Workstations) I followed the instructions for the extraction of the installer and .msi and then creating a .mst transform file to set custom options. (Suppress EULA, dont create desktop icon etc) I then added the package to my deployment GPO applied the relevant .mst file and preceded to deploy accross the network. The software package is computer assigned to be installed prior to logon, to avoid user permissions issues. The package deploys correctly to computers and will run perfectly fine if you run from a shortcut, however when trying to view a pdf from within a web browser it fails with the following message. "The adobe acrobat/reader that is running can not be used to view PDF files in a web browser. Adobe Acrobat/Reader version 8 or 9 is required. Please exit and try again" I have found many pages on google refering to this problem, but none appear to be in relation the problems I have found. http :// kb2.adobe.com/cps/405/kb405461.html These fixes recommend correcting a registry entry (which i should mention is missing after the deployed installation. However this does not work. Switching off display in a browser - Seems to defeat the object of fixing the problem Removing old versions - There arent any. Trying with a different user - This affects all users of all privalige levels on all computers. On my workstation I uninstalled Acrobat Reader 9.1 then reinstalled manually using the same installation source files and it works fine. has anyone sucsessfully deployed AR9.1 on their domain and if so how? For the time being I have downloaded the older 8.1.3 release and deployed this in the same way which works fine, but would like to be using the up to date version. Thanks

  Read the article

• Can not boot windows XP from cloned hard disk - what can I do?

  - by Martin

  My configuration: a PC (some years old) with MSI K8N-Neo-4F Motherboard, 1 GB RAM. Disk 1 (Maxtor, SATA II, 250 GB): 2 Partitions, on Partition 1 (48 GB): Windows XP Professional (NTFS) on Partition 2 (190 GB): data (NTFS) I wanted to have a larger and faster disk (the PC is incredibly slow and permanently the disk is rattling when I try to open an application or during Windows startup), so I took Disk 2 (Seagate, Sata II, 500 GB), installed in the PC, created at first a 400 GB-partition at the end of the disk and cloned the data to it, which worked well Installed a swap partition and a partition for Ubuntu Linux 12.10 on the first "part" of the disk so I was able to boot Linux and the old Windows XP with the Linux "System selection" at startup. Now I wanted to move Windows XP to the new disk, deleted the Linux partitions cloned Windows XP to the new disk (with free tools - EASESUS), left both disks in the PC and tried to select the new hard drive during boot as boot partition. This did not work, the PC refused to boot from this second disk. I tried many things like making the boot partition on the 2nd drive "active" in the Windows System Preferences modifying the boot.ini file to boot from the second disk - tried to boot from it, but ended with an error message stating that it was not possible to boot from this disk because of a hardware failure or something else or so removing the original disk and plugging the new one on the same SATA port as the original one - also booting failed with an error message repairing the MBR by booting into recovery mode from the Windows XP Installation CD-ROM, selecting the second disk and doing "FIXMBR" which said that everything was fine with the MBR. after that at least the PC tried to boot from the newer disk and then startup was hanging during the blue screen with the Windows Logo.... no luck. ... deleting the cloned partition and cloning again - this time with Macrium Reflect Free version... - no success during booting. I tried a lot of things with no success, so I wonder what I am doing wrong?! What could I do to successfully clone my Win XP partition to replace the original disk by a larger one which is bootable.

  Read the article

• dell latitude XT touch screen issue

  - by Jake

  yesterday I installed windows 7 ultimate after I had the enterprise version on this machine for a few months. the installation went smoothly and everything worked fine except for the finger detection of the screen(only the pen worked) and the bottom screen buttons for rotating and so. so I started to install all the missing drivers dell recommends for this model on their site, but once I tried to install N-Trig degitizer driver the installation said it was unsuccessful and since then the touch stopped working completely! I tried system restore but it didn't help so I went on and formatted the harddisk completely once again and installed windows but that didn't work either. I tried to install the N-Trig's driver but it was alarting for a fatal error and said that no device was detected. same story with N-Trig rollback. so I checked the device manager and saw an "unknown device" with VID and PID values set as 0000. I figured the N-Trig driver might have messed with the device firmware or something and now it doesnt know it's ID and munufactor... Is there anything that can be done? like forcing the N-Trig driver to install on this device or something? please help!

  Read the article

• Enter network credentials as part of batch script

  - by Michael

  WinXP: I have several system services that are needed to run some machinery in my lab. The machine these services are running uses a lab login that has administrator rights. Our IS department, unfortunately, has it set up where at some point during the night the login "loses" the privilege level to start/stop these services. The account stays logged in, but the software controlling my hardware becomes unresponsive. In order to get things back up and running, I have to stop the system services and restart them. Because of the security settings, however, I have to re-enter the user password to start the service (even though the user was never logged out). That, I get the "This service cannot be started due to a logon failure" and I have to enter the password. What would be ideal is to have a batch script run before anyone gets into work that stops all of the necessary services, enters the user credentials when prompted, and then restarts them so that everything is ready for first shift to run. I assumed that using the Task Scheduler in Windows would work as it allows you to run batch files with a user's name and password, but this didn't seem to do the trick. With this setup I would arrive to find that all the services are stopped but not started again. (Presumably because the authentication failed.) The batch file is about as simple as it gets, all I have is: net stop "Service1" net stop "Serivce2" etc., then restart in reverse order based on dependency: net start "Service2" net start "Serivce1" What would it take to accomplish what I'm trying to do and restart the services?

  Read the article

• Sharepoint AD imported users are becomming sporadically corrupted, causing us to have to create a ne

  - by TrevJen

  Sharepoint 2007 MOSS with AD imported users. All servers are 2008. I have around 50 users, over the past 2 months, I have had a handful of the users suddenly unable to login to Sharepoint. When they login, they either get a blank screen or they are repropmted. These users are using accounts that have been used for many months, sometimes the problem originates with a password change. In all cases, the users account works on every other Active Directory authenticated resource (domain, exchange, LDAP). In the most recent case, last night I was forced deleted a user ("John smith") because of corruption. The orifinal account name was jsmith. I deleted him from active directory, then deleted him from the profile list in Sharepoint Shared Services. I could not find a way to delete him from the Sharepoint user list, but I reran the import after recreating his account (renamed it too just to be sure to "smithj"). At first, this did not wor, the user could still access all other resources but Sharepoint. then, some 30 minutes later it inexplicably started working. This morning, the user changed passwords, which immediatly broke the login on Sharepoint again. I am at a loss on how to troubleshoot this.

  Read the article

• Sharing music on NAS with other zunes and ipods

  - by osij2is

  After being a long time iPod owner, I'm switching to the new Zune with its subscription model. I haven't bought a Zune yet but I'm planning on doing so within the next month or so. I have approximately 40gb worth of music and my girlfriend has her iPod music library around 30gb. I've been trying to figure out how to migrate all our music off of our laptops/desktops and centralize everything on my NAS. In sharing iPod music isn't too bad. Sharing from one machine to all is fairly easy within the iTunes player. As far as storing all the music on a NAS, again, iPods aren't too bad and imagine other systems aren't difficult. But I'm really new to the Zune and I'm beginning to run into some issues. My questions are: Is it possible to store all music from our iPods and Zune subscriptions and share music between the iPod/Zune within the same file share on my NAS? I'm sure it's possible to store music on a share, but I'm not sure how iTunes and the Zune software differs. Is there 3rd party software, maybe something like DoubleTwist that can sync based from NAS to multiple desktop/laptops? I've never used DoubleTwist but it's something that I found that looks close to being what I need. I've never quite done this myself so I'm trying to find a solution that can: a) store music on a network share; b) sync between different devices (zune/ipod) seamlessly.

  Read the article

• Router vs switch in a LAN [closed]

  - by servernewbie

  If I have a LAN and and connect it with a switch, I understand it uses a CAM table to route packets in layer 2 (by saving mac to port relations). So far all good. However, when using a router for a LAN (ONLY for a LAN, not to connect it to "the outside" WAN/internet/etc) I get a bit confused as to how it internally processes packets. I would first split this into two router scenarios: Router with buit-in switch In this scenario, I would expect that it will act exactly as a switch with a CAM table internally. This would probably benefit a bit in speed (guessing here?) compared to the next option. Router without built-in switch Here is where I get confused. If hostA wants to send a packet to hostB, it will ARP to find hostB's MAC address and send it there. Now, if we had a switch (above scenario) this would be easy. But how does it work now in a router WITHOUT a switch? If I would guess, hostA would send an Ethernet frame with hostB's MAC address to the line. The router would fetch the packet (even though the router has another MAC address, it would still fetch this packet even if it only contains hostB's MAC address). It would strip the Ethernet frame header and check the IP, and then check its own internal ARP table again for the MAC address. Now, this would seem like a waste of resources compared to a router with a built-in switch. But maybe it does not work like that at all. Does it also contain a CAM table? If that would be true, what would then the difference between these two routers really be?

  Read the article

• Formatting a memory stick with two partitions?

  - by Marius

  I have a 16GB memorystick which used to have a Linux partition. It therefore has two partitions; 2GB FAT32 and 14GB linux boot drive. The linux part stopped working, so I decided to reinstall it. But windows can't see that partition. I tried formatting the whole disk, but I can only format one partition (the FAT32). There seems to be no way to combine the two partitions into one big one, and there seems to be no way for windows to partition the large part of the memorystick to but Linux on it. In the windows partition manager, windows sees the large unused partition, and it let me delete it. But once I have deleted it, I'm not allowed to format it. Also I cannot delete or resize the small partition. So, to summarize: I have a memorystick with two partitons. Windows only sees one of them, and won't let me use the other one. I would like to combine the two partitions so I can install Linux on the memory stick again.

  Read the article

• Power Outage Interrupted Upgrade from Windows Vista Ultimate to 7 Ultimate, Reverted to Vista, Now Vista is failing... What Next?

  - by tednewk

  I was in the midst of what seemed to be a successful upgrade from Vista Ultimate to 7 Ultimate when there was a brief blackout. The upgrade failed and Windows reverted back to Vista. Now Vista is very slow to boot, has problems waking back-up from inactivity and quickly loses it's wireless connection. The wake-up problem manifests itself as the mouse is clearly shown on a black screen but I have no access to the Desktop or Taskbar or Explorer. Even Alt-Ctrl-Delete doesn't seem to work. No task menu, no reboot. Hitting the reset button reboots the machine with the usual Black Screen warnings offering Safe Mode. I tried to do a system restore to a point before the upgrade. That didn't seem to work. My guess is that my system is a mutant with parts of Vista and parts of 7 crashing each other. I would like avoid a clean install if at all possible to avoid reinstalling other software. What should I try now? My thoughts are: My a system back-up to lock the computer in place Trying a second 7 upgrade If that appears to be working make another back-up If not reload back-up and try a repairing Vista from DVD. If that appears to work make another back-up, let system stablize about a week then try 7 install again If that doesn't work are there any other options to try before settling for a clean install? Another complication, I am doing this by "remote control". I'm traveling with my job and I'll be talking my son through it over the phone. (Kind of like the landing the 747 cliche from all the 70's adventure shows!) So is there a way of simplifying the steps? Thanks Ted

  Read the article

• Application Pool Identity corruption

  - by Gavin Osborn

  I have observed a few times while deploying software into IIS that every now and again the related Application Pools fail to restart and in the Event Log we see an error like the following: The identity of application pool, 'AppPoolName' is invalid. If it remains invalid when the first request for the application pool is processed, the application pool will be disabled. This does not happen frequently but when it does the only solution is to re-apply the Identity password in the IIS Manager Window. As soon as I re-apply and then restart the application pool the web sites come back up. Facts: The account is a service account whose password never expires. The account is local to the IIS host. The account password is never changed. This is IIS 6 running on Windows Server 2003 Deployment of the software is via MSI and involves several IIS Resets. The software is created in house and does not do anything fancy to IIS. Any ideas how the identity information might become corrupt? Edit: Clarification To be clear - this user account and password combination work absolutely fine and usually works fine as the Identity of the Application Pool. It is only when we deploy updates of our software into an existing IIS application that it stops working. Our password has not changed Our deployment does not change the password or reconfigure the application pools. This does not happen every time, 1/20 times perhaps. If we re-enter the password into IIS and restart the App Pools everything works.

  Read the article

• Why can't I get out of display mirror mode?

  - by Roy Smith

  I've been running Ubuntu (10.04.1 LTS, 64-bit) for a while and just replaced my hardware with a faster machine with an ATI Radeon HD 5700 video card. I've got twin 1920 x 1080 displays. I downloaded the latest driver (ati-driver-installer-10-9-x86.x86_64.run) from the ATI web site and installed that. I've gone through a few rounds of playing with /etc/X11/xorg.conf, and can't get things right. At the moment, it's in display mirroring mode, and I can't figure out how to get it out of mirror mode. If I run Monitor Preferences, there's a "Same image in all monitors" checkbox. If I uncheck that, the little preview window switches to show two monitors. When I click Apply, it asks me to log out and log back in again. When I do that, I'm right back to mirrored mode. What's really weird is that I'm currently running a copy of xorg.conf from a coworker's machine. He's got identical hardware, and his display works fine. So, I'm inclined to think there's something else going on other than the conf file. Any ideas what might be wrong?

  Read the article

• Windows Vista/7 dropping Mac Server share points

  - by Hooligancat

  My Windows Vista and Windows 7 clients are having problems maintaining access to SMB shares on a Mac server. The initial connection to the server appears to be OK, as the Windows clients can see all of the server share points. However, the client randomly drops a couple of the server share points although the clients can still see the server. For example. If I have the following share points on the Mac server: Share A Share B Share C Share D Share E The Windows client can see these shares most of the time and can access them most of the time. But randomly a couple of the shares will just get dropped or go missing from the Windows client's ability to view them so I end up with something like: Share B Share D Share E All the share points are established int the same way with the same permission settings. My Mac OSX Server is set up with the following for SMB: SMB sharing enabled Standalone Server Workgroup of `CORPORATE` Allow Guest Access = YES Client connections limit = 100 Authentication: NTLMv2 & Kerberos and NTLM Code Page is Latin US (437) This is a workgroup master browser WINS registration is set to Enable WINS server (tried with setting off) Enable virtual share points for homes YES I noticed in my SMB file service log that the clients appear to connect OK, but I get the following error which implies a reset by either the server or the client: /SourceCache/samba/samba-187.9/samba/source/lib/util_sock.c:read_data(534) read_data: read failure for 4 bytes to client 192.168.0.99. = Connection reset by peer I am a bit stumped as to a direction to turn to try and get this to resolve. Continued attempts to access the server from the client will reconnect to the share points, but they inevitably get dropped again in the near future. Any and all help much appreciated.

  Read the article

• Simple Distributed Disconnected way to sync a directory

  - by Rory

  I want to start regularly backup my home directory on my ubuntu laptop, machine X. Suppose I have access to 2 different remote (linux) servers that I can backup to, machines A & B. Machine X will be the master, and should be synced to A and B. I could just regularly run rsync from X to A and then from X to B. That's all I need. However I'm curious if there's a more bandwidth effecient, and hence faster way to do it. Assuming X is going to be on residential style broadband lines, and since I don't want to soak up the bandwidth, I would limit the transfer from X. A and B will be on all the time, however X, will not be, so I'd also like to reduce the amount of time that X is transfering, potentially allowing A and B to spend more time transfering. Also, X won't be connected all the time. What's the best way to do this? rsync from X to A, then from A to B? Timing that right could be troublesome. I don't want to keep old files around, so if I was to rsync, then the --del option would be used. Could that mean something might get tranfered from A to B, then deleted from B, then transfered from A to B again? That's suboptimal. I know there are fancy distributed filesystems like gluster, but I think that's overkill in this case, and might not fit with the disconnected nature.

  Read the article

• Whats the easiest route to trying out mono 2.6?

  - by E J

  We have several web applications built on Microsoft technologies (asp.net+mvc framework, built using VS2008, MS SQL Server). I have recently be playing with Ubuntu (9.10), installed using Wubi, and wanted to see if I can get our apps running on a foss software stack. I have got the hang of the very basics of Postgresql and I have read that there is some support for Linq to SQL in mono (as of 2.6) as well as asp.net/MVC. However I am unsure how to go about getting Mono 2.6 up and running. Here is what I have discovered so far: Ubuntu is not meant for the 'cutting edge' it is designed to be stable hence, it sometimes takes a release cycle or two for new software to make it to the repositories Mono is already installed by default, but it is likely to stay at version 2.4 for at least the 10.4 release You can install paralell environments of Mono, if you know what your doing. I have had a go at setting up parallel environments, but haven't had any luck yet. (And TBH I am not certain that that will do what I think it's gonna do). (tl;dr start here) Is there a distribution of Linux similar enough to Ubuntu, that I wouldn't have to start the learning curve all over again, but that will let me install Mono 2.6, Postgresql, (and possibly mono-develop 2.4)? Or should I persist with Ubuntu?

  Read the article

< Previous Page | 678 679 680 681 682 683 684 685 686 687 688 689  | Next Page >