Search Results

Search found 45949 results on 1838 pages for 'super tomtom'.

Page 682/1838 | < Previous Page | 678 679 680 681 682 683 684 685 686 687 688 689  | Next Page >

• OpenVPN with MacOS X Client and same subnets in local and remote net.

  - by Daniel

  I have a homenetwork 192.168.1.0/24 with gteway 192.168.1.1 and a remote network with the same parameters. Now I want to create a OpenVPN tunnel between those networks. I have no problems with Windows, because Windows routes everything to 192.168.1.0/24 except 192.168.1.1 throught the tunnel. On MacOS X however I see the folling line in the Details window: 2010-05-10 09:13:01 WARNING: potential route subnet conflict between local LAN [192.168.1.0/255.255.255.0] and remote VPN [192.168.1.0/255.255.255.0] When I list the routes I get the following: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 13 3 en1 127 localhost UCS 0 0 lo0 localhost localhost UH 12 3589 lo0 169.254 link#5 UCS 0 0 en1 192.168.1 link#5 UCS 1 0 en1 192.168.1.1 0:1e:e5:f4:ec:7f UHLW 13 17 en1 1103 192.168.1.101 localhost UHS 0 0 lo0 192.168.6 192.168.6.5 UGSc 0 0 tun0 192.168.6.5 192.168.6.6 UH 1 0 tun0 My Interfaces are en1 - My local Wifi network tun0 - The tunnel interface As can be seen from the routes above there is no entry for 192.168.1.0/24 that routes the traffic through the tunnel interface. When I manually route a single IP like 192.168.1.16 over the tunnel gateway 192.168.6.6, this works. Q: How do I set up my routes in MacOS X for the same behaviour as on windows, to route everything except 192.168.1.1 through the tunnel, but leave the default gateway to be my local 192.168.1.1 ?

  Read the article

• Weird question about Win 3.1x startup processes

  - by Erez

  Can anyone tell me how many processes were loaded in Win 3.1x on startup? (Eg, system tasks.)

  Read the article

• Missing startup screens and slow bootup/login after using WinClone to expand Bootcamp partition

  - by user26453

  I used WinClone to backup my Bootcamp partition, which was a Windows 7 Ultimate install, on my late 2006 Macbook Pro. I desired to expand the Bootcamp partition's size. It worked reasonably well with some hiccups along the way and some remaining issues. First issue I ran into was the Bootcamp Assistant utility - it would not recreate the partition. This was due to a lack of contiguous space that is required for the Bootcamp partition. As a result I wiped the whole drive and reinstalled Snow Leopard, did the minimum amount of system updates, and created and formated a new Bootcamp partition. WinClone restored the image without complaint and the image was automatically resized to the new partition's size. Second issue I ran into was after the first boot into Windows. The first thing I noticed was that instead of the newer "slick" startup screen (4 colors wisping around, a Windows 7 title), there was more of an old school style startup screen (a progress bar with block increments, yellow/greenish color, nothing else really). The initial bootup to a login screen was slow, perhaps as Windows dealt with the partition changes. After logging in, the screen goes blank and the computer seems to hang for a minute, before completing the login. After subsequent restarts, the slick screen is still missing, boot to login screen is normal, but the time from login to desktop active is still very slow. As a side note, this behavior of a long time from login to the desktop finally loaded I've previously only seen when the computer would try to hibernate and fail (battery is really bad). On the next startup, I would see this behavior, but not subsequently. So a potential cause: I imaged the partition after hibernating out of Windows. From reading some posts/guides on the subject, this was not recommended, and perhaps shouldn't even have worked? Could the partition be stuck in some weird mode as a result that makes the boot issues appear? I've attempted to disable hibernation and restart, trying to delete the .sys file that hibernation uses. Other fixes I'm thinking of attempting are booting a Win7 disc and repairing the install/partition. I can't shake the nagging feeling something isn't right as a result of the modified boot screens and the slow login process.

  Read the article

• Optimizing wireless router speed and minimizing interference.

  - by Tchalvak

  I've been experiencing problems with my wireless connectivity lately, and want to make sure that it's not related to the abundance of other wireless routers here in my building. So, what I'm looking for is a method (probably via some application or another) to audit the wireless channels (and other factors that might be important that I don't even know of yet) that are floating through the aether around me. Ubuntu or other linux apps are preferred, but some kind of windows/mac solution is possible, since I do have other OSes around me that I could install & test on. Router: netgear WGT624 v3 Hearsay tells me that channels 1, 6, and 11 are "non-overlapping" (I expect they aren't used for non-wireless-router purposes or something, not sure how they couldn't overlap with other routers using other channels), so perhaps my best choices of channel are limited, so if channels aren't really a big concern, I'd be happy to get links to other optimizations that I should look into.

  Read the article

• TTY with 256 colors?

  - by timn

  With URxvt and xterm it is possible to use a virtual terminal supporting 256 colors instead of only eight. Since my Intel GMA graphics card is well-supported by the KMS framebuffer driver, I am exclusively working on the TTY. Unfortunately it only supports eight colors although with MPlayer (-vo fbdev/fbdev2) and other framebuffer tools far more can be addressed. Is there a way to tell the TTY to use more than eight colors?

  Read the article

• Is there any software or hardware which lets you stop, slow down, speed up or even reverse time?

  - by tjrobinson

  Obviously I'm talking about time in terms of the PC clock rather than real time. We were testing an application we've developed at work by setting the clock forward and back to simulate different scenarios and I started thinking how useful it would be if you could adjust the rate(?) of the system clock with finer control. So you could make a minute pass in a second or a day pass in 30 seconds and watch how the program you're developing copes with changes in date and time. I'd be interested to hear if anyone knows of any software or hardware which can let you do some or all of the above.

  Read the article

• Piecing together low-powered hardware for an RS-232 terminal server

  - by Fred

  I'm working on reconstructing my Cisco lab for training/educational purposes and I found that the actual terminal server I have is dead. I have a couple of 8-port PCI serial cards which would be more than ample for my lab, but I don't want to leave my personal computer running to be able to access the console ports. Ideally I would access the terminal server remotely, either by SSH/RDP to the box (depending on what OS I go with) or by installing a software package that allows me to telnet directly to a serial port. I know I've found a program that does this under Linux in the past but its name escapes me at the moment. I'm thinking about scavenging for some old hardware, on eBay or something, to put together a low-powered PC. Needs to be something that: Has Low-power consumption Has at least 2 PCI slots (though I certainly wouldn't complain about having more) Has onboard Ethernet (or, if not, another PCI or ISA slot (not shared)) Can be headless once an OS installed (probably Linux) I'm currently leaning towards an old fashioned Pentium (sub-133MHz era) but I am wondering if anybody else knows of another platform/mobo that would suit these needs. Alternatively, I've been considering buying a Raspberry Pi and a big USB hub along with a bunch of USB-Serial adapters but this sounds like it'd get messy quick with cables and adapters all over the place, and I may not even have the same ttyS#'s between boots.

  Read the article

• Typing Japanese on Windows Vista with Dvorak

  - by Ken

  I'm using Windows Vista, and I type English with the Dvorak keyboard layout, and I want to be able to type Japanese text that way, too. I've figured out how to set it up to let me type Japanese here, but it uses QWERTY. What I've got so far is: click the "EN" in the taskbar, and select "JP" if the letter that appears in the taskbar is "A", hit alt-~ to change it to "?" type as if I was typing Romaji on a QWERTY keyboard, (e.g., left pinky home row, right ring finger top row), and hiragana appear (??) press spacebar to convert to kanji (e.g., ?), and return to accept That all works great, but it assumes I'm on QWERTY, which isn't very comfortable for me. I want everything the same, but to be able to type kana with Dvorak (e.g., left pinky home row, left ring finger home row - ??). I can do this on Mac OS, so it's not an unheard-of feature. But it was kind of an obscure setting to find, so I figure on Windows it's probably a really obscure setting. :-) But I haven't been able to find it yet. Thanks!

  Read the article

• taskmgr.exe - Wrong Volume

  - by bcasp

  The other day my girlfriend used my computer to use one of those additional resource CD's that come with text books. This particular CD worked by acting like what seemed like a web server that hosted a site that the student is supposed to use (cgi-bin, python scripts...the whole deal). Today, I opened task manager to shut down some rogue IE's and got the following in an error popup with the title taskmgr.exe - Wrong Volume and Cancel/Try Again/Continue buttons: The wrong volume is in the drive. Please insert volume DosageCalc into drive D: (FYI: DosageCalc = nursing student) Clicking Cancel or Continue lets me continue to task manager. The CD hasn't been in the drive for days and I've used it since then with no problems. Where could task manager be holding onto this reference? My guess would be the registry somewhere...but I don't even know where to begin looking.

  Read the article

• Comparison between these video cards?

  - by seedeg

  Currently I have a GeForce 8600GT as a video card. I started playing EVE online and it is not that smooth (Apart from the fact that my Windows 7 is starting to become slow so it needs a format). Now I have these 3 video cards on my mind: 1GB Gainward GF GT240 PCI-Express Video Card 1GB Gainward GF9800GT PCI-Express Video Card 1GB Gainward GF GT240-GS PCI-Express Video Card I tried comparing them from nvidia's site: HelpMeChoose but the GT240-GS is not available for comparison. However, when I tried comparing the GT240 with the 9800GT, the latter was the winner. You must keep in consideration that the cheapest one is the GT2400. The 9800GT is in the middle, and the one which is not available for comparison, the GT240-GS is the most expensive one (about 6 euros more than the 9800GT). Is the GT240-GS the best video card from these? Thanks in advance for your responses.

  Read the article

• Laptop Suggestions and Alternatives [closed]

  - by Pennf0lio

  Hi, I need some suggestions and alternatives in buying laptops. Me and my Girlfriend are planning to buy laptops. Her budget is $600 and mine is $850. We both love apple products, because of it's elegant design and yet powerful. But we can't yet afford mac laptops.. so we are looking for alternatives. One we see is The Stylish Sony E-Series (white version) see it here. To give you an Idea, Software she frequently use are Photoshop, MS Office and firefox. Mine is Adobe CS4, Cinema4d, MS Office and firefox. We are looking for light, slick and clean interface of a laptop (very close to mac notebooks). Thanks!

  Read the article

• How to test an AMD athlon 64 X2 processor? Accidentally connected AM2+ processor in AM2 socket.

  - by andres cardona

  I have a motherboard with an AM2 socket. Recently I bought a new processor from Amazon which is AM2+. The new processor seemed to fit into the socket so I plugged it in but I wouldn't boot. Then I did some research and found out that I got the wrong processor. How do I know if the processor was damaged?

  Read the article

• Can you tell DDR and DDR2 apart visually?

  - by Macha

  I'm getting a few old computers to take apart for parts soon. Most of them are defintely using DDR2 RAM, but there is the possibility that one or two of them are using DDR RAM. Since these are quite old, the manuals have since been lost. Is it possible to tell DDR and DDR2 RAM apart visually, and if so how?

  Read the article

• When did my LaTeX files become TeX files!?

  - by andrz_001

  After transferring all my files onto a new machine, all files that were once LaTeX files (having the texnic center "T" icon) are now TeX files (having the TeX works icon --I don't remember installing that one!). But....the files are associated with the technic center! In other words, the files open with the texnic center, yet the "type of file" is "tex document". I'm using the same miktex distrubution and texnicCenter (both for windows xp) as on the old machine. Again, I don't know how/where I got this texworks on the new machine--assuming it came with windows. A question: Could these tex associations cause me any new surprises, anything unexpected? Like certain packages not working, etc? Because I can't have that!! Should I not fix it if it ain't broken!? For instance, one particular file yesterday would not produce any pdf output after compiling...after trying many things (other files compiled as they should have), I got to thinking to try it without the setspace for doublespacing!! And it worked. I have no idea why. Anyway.... Real question: How to revert to LaTeX file associations?? Rhetorical question: Would this question have better luck in ctan or stackoverflow? I guess I'll find out! Thank you wholeheartedly!

  Read the article

• Do I dare clicking Delete Volume instead of Delete Partition?

  - by Olle

  I have a VMWare machine with one VM. That VM has a virtual disk which in windows is configured with two partitions and then a lot of slack space, as illustrated here: http://piclair.com/q8g5s What I want to do is delete the partition of 639 GB. However, since it's a dynamic disk, the right menu item says "Delete Volume" instead of "Delete Partition" (when I right click the 639GB space). My question is weather I dare to use "Delete Volume". I have read doing stuff like this on a dynamic volume can cause other partitions/volumes to go corrupt.

  Read the article

• need to run command against multiple lines in file that start with ica-tcp

  - by Nick Parsells

  I want to run a command on each line of a file I have, however its a bit more complicated then I originally thought. The file contents look like this typically; however there are sometimes more connections: SESSIONNAME USERNAME ID STATE TYPE DEVICE services 0 Disc console 1 Conn t-rpal 48 Disc ica-tcp#0 bpofiretest 50 Active wdica rdp-tcp#2 a-nparsells 51 Active rdpwd ica-tcp 65536 Listen rdp-tcp 65537 Listen The command I want to run is reset session ica-tcp#0. I also want to run the same command on any additional connections that start with ica-tcp that the scripts finds in the file. How can I write a script like that in powershell? thanks!

  Read the article

• Calendar shows lighter/greyed out items

  - by ACarter

  Here's a screenshot of my Windows 8.1 Calendar. As you can see, some of the items appear lighter/greyed out (ie on the 15th, 21st). Why is this? I have not noticed any difference between these items, and none of the ideas I've had for why (ie items without a specific time are lighter) have fitted. My calendar is synced to hotmail. The calendar online (hotmail.co.uk). (There are a couple of new events, but nothing should have changed with the earlier ones.) This event appears lighter. But this event does not.

  Read the article

• Lossless cutting of MPEG TS files in Windows

  - by Sebastian P.R. Gingter

  I have several HD video files in transport stream (.ts) format, recorded with my satellite receiver. I want to cut them, as in simply remove a few minutes from the beginning, the end and sometimes a few minutes in the middle of it (remove early start of recordings, late ends and, for some seldom files, the ads). What is a good, ideally but not necessarily free, software with a GUI to do this? Best would be something where you could select points on a timeline and simply cut the elements out. As a resulting file, just the same .ts format would be great, but I could also live with putting the video contents into another container, as long as the video is NOT re-encoded / transcoded. The files have additional audio streams and subtitles. These should be retained in the process. My OS is Windows.

  Read the article

• Different display arrangements for two identical displays

  - by Niels

  I have a MacBook Pro running OSX Lion and two workplaces with identical setups: at both places I have an 27" LED Cinema display. At one workplace my MacBook is on the left side of the external display, and at the other workplace it is on the right. I would like to have two different display arrangements for the two different setups, however, when I change the display arrangements in System Preferences when connected to one display, the arrangement is changed for the other display as well. I used to have a 27" and a 24" Cinema Display, and OSX used to remember the display arrangements for those different displays, but now the displays are identical, so they use the same arrangements setting. Is there any way to tell OSX to handle two identical displays as different ones so I can configure two different arrangements for the two setups?

  Read the article

• How can I get a list of directories with ack?

  - by KPthunder

  I have a directory listing as follows (given by ls -la): total 8 drwxr-xr-x 6 <user> <group> 204 Oct 18 12:13 . drwxr-xr-x 7 <user> <group> 238 Oct 18 11:29 .. drwxr-xr-x 14 <user> <group> 476 Oct 18 12:31 .git -rw-r--r-- 1 <user> <group> 601 Oct 18 12:03 index.html drwxr-xr-x 2 <user> <group> 68 Oct 18 12:13 test drwxr-xr-x 2 <user> <group> 68 Oct 18 12:13 test2 Running ack . -f prints out the files in the directory: index.html How can I get ack to print out the directories in the directory? I want to ignore the .git directory (which I understand is default behavior for ack). On that note, how can I ignore certain directories? I am using ack 1.9.6 on Mac OSX 10.8.2.

  Read the article

• Emptying Windows temp folder is a good idea?

  - by Siva Charan

  Am using DELL Inspiron with Windows 7. As far as I know emptying the windows temp folder would be good. But I faced a strange behaviour around 8 months back, when I clear my windows temp folder. The next day onwards, my laptop starting displaying daily one or other errors and one day OS got crashed. Till now I am not sure whether OS got crashed due to clearing the windows temp folder or something else is problem. Here Windows temp folder mean "C:\Windows\Temp" This is the behind the story. Today, this temp folder "C:\Windows\Temp" contains 102 GB Most of the space occupied by the files starts with etilqs_*.*. I came to know that these files are generated due to WD SmartWare. Now my problem is:- Actually I want clean up this folder, since it occupies lot of space. If I clean up "C:\Windows\Temp" folder, will my laptop face the same kind of problem which I faced earlier OR Any new problems will occur? Please suggest me a good solution.

  Read the article

• Sound entirely stopped working on Windows 8 on a Macbook Pro

  - by Kelvin Bongers

  I am currently running Windows 8 (downloaded from DreamSpark) on a Macbook Pro. This worked fine for a while but suddenly all audio stopped working. When I go to "Playback devices" and hit "Test" on the speakers I get treated with the following message: This also shows up right after I try restarting. I tried disallowing exclusive usage of the devices but it makes no difference. Edit: After some looking around I tried changing the sample rate and bit depth so I would get a dialog screen to force Windows to go around the program that's using it. I did get the dialog but then instead of changing it I got the following error: Edit 2: I narrowed it down to a single service failing to start, the Multimedia Class Scheduler service fails to start with the following error:

  Read the article

• Why do "ls" in UNIX and "dir" in DOS have different names?

  - by bizso09

  Why do they have different names for the same command, listing a directory? Surely, they could have talked to each other and agreed on one common name, such as for example cd which is the same for both unix and dos. This decision to have different names has created many headaches for developers and users and also increased incompatibility between the two systems. Did they do it on purpose? Then how come "cd" is the same?

  Read the article

• Bulk "open with" change on OS X 10.6

  - by railmeat

  I use Microsoft remote desktop to connect from my mac to the windows machine I work on. I have a directory with about 50 different rdp files. (The config files for each machine). They go changed to open with the remote desktop in Windows XP on Parallels. Is there a command I can use to change all those back to opening with the remote desktop on my Mac? I can use the right mouse click "Always open with" command, or the equivalent on the "Get Info" menu, but I would like to find a way to make that change in bulk. "Change All..." button on the "Get Info" menu does not have any effect.

  Read the article

• Adding Windows 7 to GRUB

  - by Aakarshit

  I had Windows 7 and Vista installed on my laptop. When I installed Ubuntu 9.04 the GRUB entry for Windows 7 was erased and I can only see choices for Vista and Ubuntu in the boot menu. How do I overcome this problem?

  Read the article

< Previous Page | 678 679 680 681 682 683 684 685 686 687 688 689  | Next Page >