Search Results

Search found 23309 results on 933 pages for 'bit operations'.

Page 683/933 | < Previous Page | 679 680 681 682 683 684 685 686 687 688 689 690  | Next Page >

• How to troubleshoot ethernet port on laptop

  - by Psallas Vassilios

  I have a problem with my wired connection. To be more specific, my laptop doesn't seems to recognize that I have plugged in an ethernet cable. I tried to download new drivers for my ethernet card, but I couldn't find any solutions. Maybe because I am new to Linux, so I'm not familiar with running commands in the terminal. OK I have typed the command and here are the results: 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02) For the second reply I don't know if the following is what you asked me: ?Memory: 3.9 GiB ?Processor: Intel Core 2 Duo CPU P8800 @ 2.66GHz × 2 ?OS type: 32-bit My Ethernet connection had some problem on Windows too. I have changed recently my internet provider, and since then my ethernet cable is not recognized by the laptop. At that time I was still on Windows. I thought that with Ubuntu the problem would be solved, but unfortunately the problem still persists. If someone can help me to solve my problem I'll be thankful. Here are the results of the three first commands you told me to run: lsmod | grep sis190 sis190 22570 0 sudo modprobe sis190 ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:90:81:7e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:185 errors:0 dropped:0 overruns:0 frame:0 TX packets:185 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22672 (22.6 KB) TX bytes:22672 (22.6 KB) wlan0 Link encap:Ethernet HWaddr 00:25:d3:2c:3a:ae inet addr:192.168.1.72 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe2c:3aae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:260 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:71992 (71.9 KB) TX bytes:52000 (52.0 KB) and the results of running the last two commands: dmesg | grep -e eth -e sis190 [ 0.816667] sis190: sis190 Gigabit Ethernet driver 1.4 loaded [ 0.816728] sis190 0000:00:04.0: setting latency timer to 64 [ 0.816751] sis190: 0000:00:04.0: Read MAC address from EEPROM [ 0.904032] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address [ 1.416030] sis190: 0000:00:04.0: Using transceiver at address 1 as default [ 1.448235] sis190 0000:00:04.0: eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8410000 (IRQ: 19), 00:90:f5:90:81:7e [ 1.448238] sis190 0000:00:04.0: eth0: GMII mode. [ 1.448243] sis190 0000:00:04.0: eth0: Enabling Auto-negotiation [ 11.560907] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372019] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.424038] sis190 0000:00:04.0: eth0: auto-negotiating... nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: sis190 State: unavailable Default: no HW Address: 00:90:F5:90:81:7E Capabilities: Carrier Detect: yes Wired Properties Carrier: off

  Read the article

• Methodology to understanding JQuery plugin & API's developed by third parties

  - by Taoist

  I have a question about third party created JQuery plug ins and API's and the methodology for understanding them. Recently I downloaded the JQuery Masonry/Infinite scroll plug in and I couldn't figure out how to configure it based on the instructions. So I downloaded a fully developed demo, then manually deleted everything that wouldn't break the functionality. The code that was left allowed me to understand the plug in much greater detail than the documentation. I'm now having a similar issue with a plug in called JQuery knob. http://anthonyterrien.com/knob/ If you look at the JQuery Knob readme file it says this is working code: $(function() { $('.dial') .trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); But as far as I can tell it isn't at all. The read me also says the Plug in uses Canvas. I am wondering if I am suppose to wrap this code in a canvas context or if this functionality is already part of the plug in. I know this kind of "question" might not fit in here but I'm a bit confused on the assumptions around reading these kinds of documentation and thought I would post the query regardless. Curious to see if this is due to my "newbi" programming experience or if this is something seasoned coders also fight with. Thank you. Edit In response to Tyanna's reply. I modified the code and it still doesn't work. I posted it below. I made sure that I checked the Google Console to insure the basics were taken care of, such as not getting a read-error on the library. <!DOCTYPE html> <meta charset="UTF-8"> <title>knob</title> <link rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/hot-sneaks/jquery-ui.css" type="text/css" /> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.js" charset="utf-8"></script> <script src="https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/jquery-ui.min.js"></script> <script src="js/jquery.knob.js"></script> <div id="button1">test </div> <script> $(function() { $("#button1").click(function () { $('.dial').trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); }); </script>

  Read the article

• Can working exclusively with niche apps or tech hurt your career in software development? How to get out of the cycle? [closed]

  - by Keoma

  I'm finding myself in a bit of a pickle. I've been at a pretty comfortable IT group for almost a decade. I got my start here working on web development, mostly CRUD, but have demonstrated the ability to figure out more complex problems. I'm not a rock star, but I have received many compliments on my programming aptitude, and technologists and architects have commented on my ability to pick things up (for example, I recently learned a very popular web framework that shall remain nameless since I don’t want to be identified). My problem is that, over time, my responsibilities have been shifting towards work such as support or ‘development’ with some rather niche products (afraid to mention here due to potential for being identified). Some of this work, if it includes anything resembling coding, is very menial scripting in languages such as Powershell or VBScript. The vast majority of the time, however, a typical day consists of going back and forth with the product’s vendor support to send them logs and apply configuration changes or patches they recommend. I’m basically starved for some actual software development. However, even though I’m more than capable of doing that development work (and actually do a much better job at it than anything else), our boss is more interested in the kind of work I mentioned above, her reasoning being that since no one else in the organization wants to do it, it must mean job security. This has been going on for close to 3 years, and the only reason I have held on is on the promise that we would eventually get more development projects assigned to us. Well, that turned out not to be true at all. A recent talk with the boss has just made it more explicitly clear, as she told me in no uncertain terms that it’s very likely that development work (web or otherwise) would go to another group. The reason given to me is that our we don’t have enough resources in our group to handle that. So now I find myself in the position that I either have to stay in what has essentially become a dead end IT job that is tied to the fortunes of a niche stack of apps, or try to find a position that will be better for my long term career. My problem (is it a problem?), however, is that compared to others, my development projects in the last three years are very sparse in number. To compound things, projects using the latest and most popular frameworks, amount to the big fat number of just one—with no work of that kind in the foreseeable future. I am very concerned that this sparseness in my resume is a deficit, and that it will hurt my chances of landing a different job. I’m also wondering how much it will hurt me, and whether that can be ameliorated with hobby projects of my own. I guess I’m looking for opinions. Thank you very much for reading.

  Read the article

• Got Samba, Got PyNeighbourhood but still no connection. What else do I need?

  - by Frank A

  I am sure I had already hit post before but then could only find it by backing through browser. Was it deleted? is the question too dumb, sorry that I do not know the right jargon just trying to get answers to my problem anyway have reworded stuff a bit This seems to be a number one requirement for lots of people and 2 months on from setting up my Ubuntu pc, I am still unable to get a lasting connection in either direction. Adding a windows pc to a network is so easy... just a few clicks and get on with using it all. Using all command approaches and modifying configuration files is hardly user friendly. Googling brings up thousands of solutions but mostly they are too techy or assume the user is fully aware of how to use Linux. I do realise that their must be a lot of flavours for connecting to networks. So far I have installed Samba and fiddled with its config file. The day I did all that it worked from XP to Ubuntu. When I came back two days later to transfer my data over it would not connect. Although the the share does show up in Windows (XP) My Network Places. Today I installed PyNeighbourhood and this shows the Ubuntu box and all of the shares I had created at some point on Ubuntu and it even shows this under the XP workgroup name. But instructions on setting the connection up seem to relate to an earlier version and nothing seems to work there either. (I unshared most of those test folders but they still show up her but that is another question. When I click on mount- I can only click on one on the Ubuntu machine, there is one with no name so I assume this to be my attempt to add one XP Shared drive using ipaddress, I get errors. (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (gksu:9767): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) OK tried to find the manual referred to... only an old comment that manual would be produced for future versions. I saw in another thread that Winbind is needed as well or at least I assume as well? Totally lost again? Please help, what else needs to be installed to connect to win pcs on the network.

  Read the article

• One Year Oracle SocialChat - The Movie

  - by mprove

  Tweet | Like | Watch on Vimeo You’ve just watched – hopefully – my first short movie. Thank you! Here is a bit of the back stage story. About 6 weeks ago colleagues from SNBC (Social Network and Business Collaboration) announced a Social Use Case Competition. It was expected to submit a video of 2 to 5 minutes duration on the Social Enterprise (our internal phrase for Enterprise 2.0). Hmm – I had a few vague ideas, but no script – no actors – no experience in film making. Really the best conditions to try something! I chose our weekly SocialChats as my main topic. But if you don’t do Danish Dogma cinema, you still need a script. Hence I played around with the SocialChat’s archive, and all of a sudden a script and even the actors appeared in front of me. The words that you have just seen are weekly topics. Slightly abridged and rearranged to form a story. Exciting, next phase. How to get it on digital celluloid? I have to confess I am still impressed by epic. (Keep in mind, epic was done in 2004.) And my actors – words – call for a typographic style already. The main part was done over a weekend with Apple Keynote. And I even found a wonderful matching soundtrack among my albums: Didge Goes World by Delago. I picked parts of Second Day and Seventh Day. Literally, the rhythm was set, and I "just" had to complete the movie. Tools used – apart from trial and error: Keynote, Pixelmator, GarageBand, iMovie. Finally I want to mention that I am extremely thankful to BSC Music for granting permissions to use the tracks for this short film! Without this sound it would have been just an ordinary slide show. – Internal note: The next SocialChat is on Death by PowerPoint vs. Presentation Zen. CU this Friday 3pm Greenwich / 7am Pacific.

  Read the article

• CES 2011–Microsoft Keynote Impressions

  - by guybarrette

  Microsoft has been kicking off the CES for a number of years by doing a keynote the evening of the event first day.  This year, SteveB talked about Xbox, Kinect, Windows 7 new laptops, Surface 2 and Windows vNext running on the ARM architecture. Some of the design of the new laptops showed are quite amazing.  This one has a dual screen with no physical keyboard.  The image is split between both screens.  A software keyboard appears when you place your 10 fingers on the lower screen. This one from Samsung has a sliding keyboard somewhat like numerous cell phones have. What I found the most amazing is that Intel was able to miniaturized a full Intel architecture (CPU, motherboard, memory) in a tiny form factor.  Imagine having the power of a full PC running .NET apps in a Zune/iPod form factor! They also showed V2 of the Surface device.  This one is called the Samsung SUR40 for Surface PC.  It’s much sleeker and it will likely loose the BAT (Big Ass Table) moniker  More info here SteveB announced that Windows vNext will run on ARM chips.  I’m intrigued by this announcement (you can read about it here) and I have many questions: -In the past ARM devices were slow, what now makes the ARM architecture able to run Windows? -ARM is 32-bit only, I think. -Does this mean that Intel wasn't able to provide such a lightweight architecture or simply that they weren't interested? -From what I understand, apps would need to be recompiled for ARM. Will we need to do that from an ARM PC or could it be done natively on Intel or on an Intel PC running in an ARM VM?  VS 2012? Ahhhh, smells like a cool PDC is coming up    Clearly it looks like PC have enough power for most of us right now and that the race is now about miniaturization, power consumption and battery life. You can watch the Microsoft CES 2011 keynote here var addthis_pub="guybarrette";

  Read the article

• Them and us

  - by Plip

  As much as we try and create inclusive societies throughout the globe time and time again we revert to our tribal and clan origins back in the distant past, be those line split across the obvious like  Nationality, Religion or even the Football teams we follow. Microsoft to me has always been a “them”. I was always on the outside looking in, free to say as I wished and have an external objective viewpoint. Now, after my first week (well four days but who’s counting) Microsoft is an “us” for me. So when I look up in the Atrium of Building 1 at Microsoft’s UK headquarters I see banners like the one above and I already genuinely feel a part of this much bigger community. I looked up at that and I felt a sense of pride to be part of something bigger, something which is out there touching peoples lives everywhere (for the good and the bad). My objectivity has made me who I am today. I’m open to other ideas and concepts, I’ve worked hard to be understanding across the board be it from technology through to cultural differences in my life and it’s vital to me that I preserve that so I now have to learn how I balance the “them” of Microsoft to the “us” of Microsoft and maintain the objectivity. It’s my job to advise people on the best way to do things, which won’t always mean “Use Microsoft Technology X”, sometimes it’ll be my responsibility to say “Don’t use Microsoft Technology X”. My first and foremost responsibility is to the customer, to give them the best advice that I can and I want to maintain that. Yeah, I’m sure I’ll be tarred by some as a Microsoft guy, for many years I’ve had just that, but those out there in the non Microsoft communities I’ve engaged in I think know that I’m the first to say when I think something is a bit naff. So, here’s my ask to you ‘the community’. Keep me honest. If I start to sound like a fanboi I want you to find me and give me a slap. It’s all too easy to forget reality sometimes and I want to make sure I stay well and truly routed in that reality. Also, no matter how much I embed myself within Microsoft I fear I will never understand Microsoft’s marketing team. In the Gents just under the WP7 banner shown above I was faced with this. Draw your own conclusions on what it’s message is.

  Read the article

• Once installed geos library (C++, and C), and then trying to install rgeos package (R), it reports geos-config missing!

  - by user1873888

  Knowing that the package rgeos, from the R language, requieres a prior installation of geos libraries, I installed, both, libgeos and libgeos-c1 (3.2.2), using the synaptic installer in my Ubuntu 12.04 (32 bit) machine. Then I tried to install rgeos directly from the R console, and it issued a message in the sense that geos-config was not found. The output is as follows: > install.packages("rgeos") Installing package(s) into ‘/home/checo/R/i486-pc-linux-gnu-library/2.15’ (as ‘lib’ is unspecified) also installing the dependency ‘sp’ probando la URL 'http://cran.rstudio.com/src/contrib/sp_1.0-9.tar.gz' Content type 'application/x-gzip' length 882102 bytes (861 Kb) URL abierta ================================================== downloaded 861 Kb probando la URL 'http://cran.rstudio.com/src/contrib/rgeos_0.2-19.tar.gz' Content type 'application/x-gzip' length 221471 bytes (216 Kb) URL abierta ================================================== downloaded 216 Kb * installing *source* package ‘sp’ ... ** package ‘sp’ successfully unpacked and MD5 sums checked ** libs gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c R centroid.c -o Rcentroid.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c gcdist.c -o gcdist.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c init.c -o init.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c pip.c -o pip.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c pip2.c -o pip2.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c sp_xports.c -o sp_xports.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c surfaceArea.c -o surfaceArea.o gcc -std=gnu99 -I/usr/share/R/include -DNDEBUG -fpic -O3 -pipe -g -c zerodist.c -o zerodist.o gcc -std=gnu99 -shared -o sp.so Rcentroid.o gcdist.o init.o pip.o pip2.o sp_xports.o surfaceArea.o zerodist.o -L/usr/lib/R/lib -lR installing to /home/checo/R/i486-pc-linux-gnu-library/2.15/sp/libs ** R ** data ** demo ** inst ** preparing package for lazy loading ** help *** installing help indices ** building package indices ** installing vignettes ‘intro_sp.Rnw’ ‘over.Rnw’ ** testing if installed package can be loaded * DONE (sp) * installing *source* package ‘rgeos’ ... ** package ‘rgeos’ successfully unpacked and MD5 sums checked configure: CC: gcc -std=gnu99 configure: CXX: g++ configure: rgeos: 0.2-17 checking for /usr/bin/svnversion... no configure: svn revision: 394 checking geos-config usability... ./configure: line 1385: geos-config: command not found no configure: error: geos-config not usable ERROR: configuration failed for package ‘rgeos’ * removing ‘/home/checo/R/i486-pc-linux-gnu-library/2.15/rgeos’ Warning in install.packages : installation of package ‘rgeos’ had non-zero exit status Forgive my ignorance, but I don't know where this file, "geos-config", comes from: should it be generated by the gcc compilations above, or should it be previously installed when the libgeos libraries were intalled? I learnt, from another machine, that "geos-config" is an executable and that it should be installed in /usr/bin. Do you have any idea on what's wrong with my procedure? Thanks, -Sergio.

  Read the article

• fdisk shows overlapping partitions

  - by Campa

  At every boot to start Ubuntu, a partition gets re-mounted more than 1 times, sometimes causing very long boots. Example below: > dmesg ... [ 21.472020] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro ... [ 42.021537] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 ... I suspect there is a problem of overlapping partitions here, regarding sda4 and sda5: > sudo fdisk -l Device Boot Start End Blocks Id System /dev/sda1 63 610469 305203+ de Dell Utility /dev/sda2 612352 32069631 15728640 7 HPFS/NTFS/exFAT /dev/sda3 * 32069632 238979788 103455078+ 7 HPFS/NTFS/exFAT /dev/sda4 238983166 625141759 193079297 5 Extended /dev/sda5 238983168 612630527 186823680 83 Linux /dev/sda6 612632576 625141759 6254592 82 Linux swap / Solaris Further details: > more /etc/fstab ... # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=b33be99b-5c9e-449e-ad48-be608aeff001 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda7 during installation UUID=7c9071cc-b77b-40da-9f80-6b8a9a220cb1 none swap sw and > mount /dev/sda5 on / type ext4 (rw,errors=remount-ro,commit=0) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/piero/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=piero) I am Running Ubuntu Oneiric + LXDE on Dell Studio XPS machine 64-bit, dual booting with Windows 7. A months ago, I resized the Ubuntu partition and maybe I messed up something by doing that. Do you have any idea, why this long booting is happening?

  Read the article

• What if you could work on anything you wanted?

  - by Nick Harrison

  What if you could work on anything you wanted? Redgate is doing an experiment of sorts this week.  Called Down Tools Week.    The idea is that they stopped working on their regular projects for a week and strike out on something that catches their attention and drives their passion. Evidently in many cases, these projects have turned out to be new features in their existing products that individual were interested in, some were internal iniatives and some where evidently off the wall new ideas.   Today is show and tell where they will share with each other what they have been working on. There may well be some interesting announcements coming out of this.    The prospects are exciting. I understand that Google does something similar allowing their employees a specified amount of time to work on projects of their own choosing.    This has been the breeding ground for some of my favorite services. It is a shame that more companies do not follow such practices.   Now I know that most companies cannot afford to shut down everything for a week and sometimes you can't really explore an interesting idea in 8 hours a week or however much time Google allocates, but still it may be worth while. What would happen if your company gave you as an individual 1 week each quarter to work on a project of your own design and see what happens?   I would be happen if you still had to get approval for before your week long adventure. Personally, I think that this could be a very effective use of training budgets.   Give me a week to research something on my own and you would be amazed at what I can find out.    Maybe this should be the prerequisite before starting a new project.   Stagger the team onboarding but have everyone spend a week long sabbatical studying BizTalk before starting a project that will hinge on BizTalk. The show and tell afterwards is a great way to keep everyone honest or at least reassure management that everyone is honest.    If your goal was to spend a week researching and exploring a new technology and you had to do a show and tell afterwards to show off what you had learned, then everyone can learn a bit of what you just learned.     Sounds like a promising win win for me. Maybe it is a pipe dream, but what if .... What would you work on if given the opportunity to work on anything you wanted?

  Read the article

• Unable to find good parameters for behavior of a puck in Farseer

  - by Krumelur

  EDIT: I have tried all kinds of variations now. The last one was to adjust the linear velocity in each step: newVel = oldVel * 0.9f - all of this including your proposals kind of work, however in the end if the velocity is little enough, the puck sticks to the wall and slides either vertically or horizontally. I can't get rid of this behavior. I want it to bounce, no matter how slow it is. Retitution is 1 for all objects, Friction is 0 for all. There is no gravity. What am I possibly doing wrong? In my battle to learn and understand Farseer I'm trying to setup a simple Air Hockey like table with a puck on it. The table's border body is made up from: Vertices aBorders = new Vertices( 4 ); aBorders.Add( new Vector2( -fHalfWidth, fHalfHeight ) ); aBorders.Add( new Vector2( fHalfWidth, fHalfHeight ) ); aBorders.Add( new Vector2( fHalfWidth, -fHalfHeight ) ); aBorders.Add( new Vector2( -fHalfWidth, -fHalfHeight ) ); FixtureFactory.AttachLoopShape( aBorders, this ); this.CollisionCategories = Category.All; this.CollidesWith = Category.All; this.Position = Vector2.Zero; this.Restitution = 1f; this.Friction = 0f; The puck body is defined with: FixtureFactory.AttachCircle( DIAMETER_PHYSIC_UNITS / 2f, 0.5f, this ); this.Restitution = 0.1f; this.Friction = 0.5f; this.BodyType = FarseerPhysics.Dynamics.BodyType.Dynamic; this.LinearDamping = 0.5f; this.Mass = 0.2f; I'm applying a linear force to the puck: this.oPuck.ApplyLinearImpulse( new Vector2( 1f, 1f ) ); The problem is that the puck and the walls appear to be sticky. This means that the puck's velocity drops to zero to quickly below a certain velocity. The puck gets reflected by the walls a couple of times and then just sticks to the left wall and continues sliding downwards the left wall. This looks very unrealistic. What I'm really looking for is that a puck-wall-collision does slow down the puck only a tiny little bit. After tweaking all values left and right I was wondering if I'm doing something wrong. Maybe some expert can comment on the parameters?

  Read the article

• How employable am I as a programmer?

  - by dsimcha

  I'm currently a Ph.D. student in Biomedical Engineering with a concentration in computational biology and am starting to think about what I want to do after graduate school. I feel like I've accumulated a lot of programming skills while in grad school, but taken a very non-traditional path to learning all this stuff. I'm wondering whether I would have an easy time getting hired as a programmer and could fall back on that if I can't find a good job directly in my field, and if so whether I would qualify for a more prestigious position than "code monkey". Things I Have Going For Me Approximately 4 years of experience programming as part of my research. I believe I have a solid enough grasp of the fundamentals that I could pick up new languages and technologies pretty fast, and could demonstrate this in an interview. Good math and statistics skills. An extensive portfolio of open source work (and the knowledge that working on these projects implies): I wrote a statistics library in D, mostly from scratch. I wrote a parallelism library (parallel map, reduce, foreach, task parallelism, pipelining, etc.) that is currently in review for adoption by the D standard library. I wrote a 2D plotting library for D against the GTK Cairo backend. I currently use it for most of the figures I make for my research. I've contributed several major performance optimizations to the D garbage collector. (Most of these were low-hanging fruit, but it still shows my knowledge of low-level issues like memory management, pointers and bit twiddling.) I've contributed lots of miscellaneous bug fixes to the D standard library and could show the change logs to prove it. (This demonstrates my ability read other people's code.) Things I Have Going Against Me Most of my programming experience is in D and Python. I have very little to virtually no experience in the more established, "enterprise-y" languages like Java, C# and C++, though I have learned a decent amount about these languages from small, one-off projects and discussions about language design in the D community. In general I have absolutely no knowledge of "enterprise-y" technlogies. I've never used a framework before, possibly because most reusable code for scientific work and for D tends to call itself a "library" instead. I have virtually no formal computer science/software engineering training. Almost all of my knowledge comes from talking to programming geek friends, reading blogs, forums, StackOverflow, etc. I have zero professional experience with the official title of "developer", "software engineer", or something similar.

  Read the article

• New ZFS Encryption features in Solaris 11.1

  - by darrenm

  Solaris 11.1 brings a few small but significant improvements to ZFS dataset encryption.  There is a new readonly property 'keychangedate' that shows that date and time of the last wrapping key change (basically the last time 'zfs key -c' was run on the dataset), this is similar to the 'rekeydate' property that shows the last time we added a new data encryption key. $ zfs get creation,keychangedate,rekeydate rpool/export/home/bob NAME PROPERTY VALUE SOURCE rpool/export/home/bob creation Mon Mar 21 11:05 2011 - rpool/export/home/bob keychangedate Fri Oct 26 11:50 2012 local rpool/export/home/bob rekeydate Tue Oct 30 9:53 2012 local The above example shows that we have changed both the wrapping key and added new data encryption keys since the filesystem was initially created.  If we haven't changed a wrapping key then it will be the same as the creation date.  It should be obvious but for filesystems that were created prior to Solaris 11.1 we don't have this data so it will be displayed as '-' instead. Another change that I made was to relax the restriction that the size of the wrapping key needed to match the size of the data encryption key (ie the size given in the encryption property).  In Solaris 11 Express and Solaris 11 if you set encryption=aes-256-ccm we required that the wrapping key be 256 bits in length.  This restriction was unnecessary and made it impossible to select encryption property values with key lengths 128 and 192 when the wrapping key was stored in the Oracle Key Manager.  This is because currently the Oracle Key Manager stores AES 256 bit keys only.  Now with Solaris 11.1 this restriciton has been removed. There is still one case were the wrapping key size and data encryption key size will always match and that is where they keysource property sets the format to be 'passphrase', since this is a key generated internally to libzfs and to preseve compatibility on upgrade from older releases the code will always generate a wrapping key (using PKCS#5 PBKDF2 as before) that matches the key length size of the encryption property. The pam_zfs_key module has been updated so that it allows you to specify encryption=off. There were also some bugs fixed including not attempting to load keys for datasets that are delegated to zones and some other fixes to error paths to ensure that we could support Zones On Shared Storage where all the datasets in the ZFS pool were encrypted that I discussed in my previous blog entry. If there are features you would like to see for ZFS encryption please let me know (direct email or comments on this blog are fine, or if you have a support contract having your support rep log an enhancement request).

  Read the article

• Small script to look for Project Replication actions that have failed

  - by Trond Strømme

  Today when looking at a couple of projects on a ZFS 7320 Storage Appliance I noticed on one project that one of its replication actions had failed, as I hadn't checked the Recent Alerts log yet I was not aware of this. I decided to write a small script to check if there were others that had failed. Nothing fancy, just a loop through all projects, look at the project's replication child and compare the values of the last_sync and last_try properties and print the result if they're not equal. (There are probably more sensible ways of doing this, but at least it involves me getting the chance to put on my headphones and doing just a little bit of coding.) script // this script will locate failed project level replication // it will look at the sync times for 'last_sync' and 'last_try' // and compare these, if they deviate you should investigate. // NOTE! this code is offered 'as is' Run at your own risk, // it will probably work as intended, but in now way can I // (or Oracle) be held responsible if your server starts behaving // like a three year old kid in a candy store.. (not that mine do, // they are very well behaved boys...) run('configuration'); run('storage'); printf('Host: %s, pool: %s\n', get('owner'),get('pool')); run('cd /'); run('shares'); proj=list(); printf("total projects: %d\n",proj.length +'\n'); // just for project level replication for(i=0;i<proj.length;i++){ run('select '+proj[i]); run('replication'); //get all replication actions preps = list(); for(j=0;j<preps.length;j++){ run('select ' + preps[j]); last_sync = get('last_sync'); last_try = get('last_try'); // printf("target %s\n", get('target')); //why the flip does this not get the proper name? if(!( last_sync.valueOf() === last_try.valueOf())){ printf("sync has failed for %s %s\n", proj[i], get('target')); }else{ // printf("OK %s %s\n", proj[i], get('target')); } run('done'); //done with the replica action } run('done'); run('done'); } printf("finished\n"); For a more on how to run the script, or testing it please look at my previous post. Sample output: Host: elb1sn01, pool: exalogic total projects: 45 sync has failed for ACSExalogicSystem cb3a24fe-ad60-c90f-d15d-adaafd595639 finished

  Read the article

• Contract / Project / Line-Item hierarchy design considerations

  - by Ryan

  We currently have an application that allows users to create a Contract. A contract can have 1 or more Project. A project can have 0 or more sub-projects (which can have their own sub-projects, and so on) as well as 1 or more Line. Lines can have any number of sub-lines (which can have their own sub-lines, and so on). Currently, our design contains circular references, and I'd like to get away from that. Currently, it looks a bit like this: public class Contract { public List<Project> Projects { get; set; } } public class Project { public Contract OwningContract { get; set; } public Project ParentProject { get; set; } public List<Project> SubProjects { get; set; } public List<Line> Lines { get; set; } } public class Line { public Project OwningProject { get; set; } public List ParentLine { get; set; } public List<Line> SubLines { get; set; } } We're using the M-V-VM "pattern" and use these Models (and their associated view models) to populate a large "edit" screen where users can modify their contracts and the properties on all of the objects. Where things start to get confusing for me is when we add, for example, a Cost property to the Line. The issue is reflecting at the highest level (the contract) changes made to the lowest level. Looking for some thoughts as to how to change this design to remove the circular references. One thought I had was that the contract would have a Dictionary<Guid, Project> which would contain ALL projects (regardless of their level in hierarchy). The Project would then have a Guid property called "Parent" which could be used to search the contract's dictionary for the parent object. THe same logic could be applied at the Line level. Thanks! Any help is appreciated.

  Read the article

• Jitter during wall collisions with Bullet Physics: contact/penetration tolerance?

  - by Niriel

  I use the bullet physics engine through Panda3d. My scene is still very simple, think 'Wolfenstein3d': tile-based, walls are solid cubes. I expect walls to block the player, and I expect the player to slide along the walls in case of non-normal incidence. What I get is what I expect, with one difference: there is some jitter. If I try to force myself into the wall, then I see the frames blinking quickly between two positions. These differ by about 0.04 units of distance, which corresponds to 4 cm in my game. I noticed a 4 cm elsewhere: the bottom of my player capsule is 4 cm below ground, when at rest. Does that mean that there is somewhere in the Bullet engine a default 0.04-units-long tolerance to differentiate contact from collision? If so, what should I do ? Should I change the scale of my game so that these 0.04 units correspond to 0.4 cm, making the jitter ten times smaller? Or can I ask bullet to change its tolerance to a smaller value? Edit This is the jitter I get: 6.155 - 6.118 = 0.036 LPoint3f(0, 6.11694, 0.835) LPoint3f(0, 6.15499, 0.835) LPoint3f(0, 6.11802, 0.835) LPoint3f(0, 6.15545, 0.835) LPoint3f(0, 6.11817, 0.835) LPoint3f(0, 6.15726, 0.835) LPoint3f(0, 6.11876, 0.835) LPoint3f(0, 6.15911, 0.835) LPoint3f(0, 6.11937, 0.835) I found a setMargin method. I set it to 5 mm both on the BoxShape for the walls and on the Capsule shape for the player. It still jitters by about 35 mm as illustrated by this log (11.117 - 11.082 = 0.035): LPoint3f(0, 11.0821, 0.905) LPoint3f(0, 11.1169, 0.905) LPoint3f(0, 11.082, 0.905) LPoint3f(0, 11.117, 0.905) LPoint3f(0, 11.082, 0.905) LPoint3f(0, 11.117, 0.905) LPoint3f(0, 11.0821, 0.905) LPoint3f(0, 11.1175, 0.905) LPoint3f(0, 11.0822, 0.905) LPoint3f(0, 11.1178, 0.905) LPoint3f(0, 11.0823, 0.905) LPoint3f(0, 11.1183, 0.905) The margin on the capsule did change my penetration with the floor though, I'm a bit higher (0.905 instead of 0.835). However, it did not change anything when colliding with the walls. How can I make the collisions against the walls less jittery? Edit, the day after: After more investigation, it appears that dynamic objects behave well. My problem comes from the btKinematicCharacterController that I use for moving my character; that stuff is totally bugged, according to the whole Internet :/.

  Read the article

• Handy Generic JQuery Functions

  - by Steve Wilkes

  I was a bit of a late-comer to the JQuery party, but now I've been using it for a while it's given me a host of options for adding extra flair to the client side of my applications. Here's a few generic JQuery functions I've written which can be used to add some neat little features to a page. Just call any of them from a document ready function. Apply JQuery Themeroller Styles to all Page Buttons   The JQuery Themeroller is a great tool for creating a theme for a site based on colours and styles for particular page elements. The JQuery.UI library then provides a set of functions which allow you to apply styles to page elements. This function applies a JQuery Themeroller style to all the buttons on a page - as well as any elements which have a button class applied to them - and then makes the mouse pointer turn into a cursor when you mouse over them: function addCursorPointerToButtons() {     $("button, input[type='submit'], input[type='button'], .button") .button().css("cursor", "pointer"); } Automatically Remove the Default Value from a Select Box   Required drop-down select boxes often have a default option which reads 'Please select...' (or something like that), but once someone has selected a value, there's no need to retain that. This function removes the default option from any select boxes on the page which have a data-val-remove-default attribute once one of the non-default options has been chosen: function removeDefaultSelectOptionOnSelect() {     $("select[data-val-remove-default='']").change(function () {         var sel = $(this);         if (sel.val() != "") { sel.children("option[value='']:first").remove(); }     }); } Automatically add a Required Label and Stars to a Form   It's pretty standard to have a little * next to required form field elements. This function adds the text * Required to the top of the first form on the page, and adds *s to any element within the form with the class editor-label and a data-val-required attribute: function addRequiredFieldLabels() {     var elements = $(".editor-label[data-val-required='']");     if (!elements.length) { return; }     var requiredString = "<div class='editor-required-key'>* Required</div>";     var prependString = "<span class='editor-required-label'> * </span>"; var firstFormOnThePage = $("form:first");     if (!firstFormOnThePage.children('div.editor-required-key').length) {         firstFormOnThePage.prepend(requiredString);     }     elements.each(function (index, value) { var formElement = $(this);         if (!formElement.children('span.editor-required-label').length) {             formElement.prepend(prependString);         }     }); } I hope those come in handy :)

  Read the article

• Creating a shared library that might be used with desktop applications and web projects

  - by dreza

  I have been involved in a number of MVC.NET and c# desktop projects in our company over the last year or so while also managing to kept my nose poked into other projects (in a read-only learning capacity of course). From this I've noticed that across the various projects and teams there is a-lot of functionality that has been well designed against good interfaces and abstractions. Because we tend to like our own work at times, I noticed a couple of projects had the exact same class, method copied into it as it had obviously worked on one and so was easily moved to a new project (probably by the same developer who originally wrote it) I mentioned this fact in one of our programmer meetings we have occasionally and suggested we pull some of this functionality into a core company library that we can build up over time and use across multiple projects. Everyone agreed and I started looking into this possibility. However, I've come across a stumbling block pretty early on. Our team primarily focuses on MVC at the moment and we have projects mainly in 2.0 but are starting to branch to 3.0. We also have a number of desktop applications that might benefit from some shared classes and basic helper methods. Initially when creating this DLL I included some shared classes that could be used across any project type (Web, Client etc) but then I started looking at adding some shared modules that would be useful in our MVC applications only. However this meant I had to include a reference to some Microsoft Web DLL's in order to leverage some of the classes I was creating (at this stage MVC 2.0). Now my issue is that we have a shared DLL that has references to web specific libraries that could also possibly be used in a client application. Not only that, our DLL referenced initially MVC 2.0 and we will eventually move onto MVC 3.0 for all projects. But alot of the classes in this library I expect to still be relevant to MVC 3 etc Our code within this DLL is separated into it's own namespaces such as: CompanyDLL.Primitives CompanyDLL.Web.Mvc CompanyDLL.Helpers etc etc So, my questions are: Is it OK to do a shared library like this, or if we have web specific features in it should we create a separate web DLL only targeted at a specific framework or MVC version? If it's OK, what kind of issues might we face when using the library that references MVC 2 in a MVC 3 project for example. I would be thinking that we might run into some sort of compatibility issue, or even issues where the developers using the library doesn't realize they need MVC 2.0 libraries. They might only want to use some of the generic classes etc The concept seemed like a good idea at the time, but I'm starting to think maybe it's not really a practical solution. But the number of times I've seen copied classes and methods across projects because they are proven tested code is a bit unnerving to be perfectly honest!

  Read the article

• Assessing Relative Maintainability

  - by João Bragança

  We (a contractor, actually) are implementing an off the shelf system to replace a legacy homegrown system for the core domain of the company (designing widgets). Unfortunately both systems will have to run concurrently for some time, as the product just isn't ready yet. Also, the decision was made to only migrate some of the widgets from the legacy system, based on date of last sale activity. Later on a new requirement came down: certain people in the company, most of them outside of the widget development context, want to search all widgets. The search results screen has 3 pieces of data: a GUID, a human readable id that is searchable, and a brief description (may need to be searchable in the future). In the widget details, there will be multiple screens. These screens align very well along SOA / bounded context lines - a screen for marketing data, a screen for sales history, etc. UML ahead! I am probably using the wrong kind of arrows here so please forgive me. The current solution - which is not in production yet - is something like the following: Both systems will be queried and the controller will merge the results. The new system has its own proprietary query language (we've alleviated this a bit with a LINQ provider). It also puts a lot of data on the wire. 15 search results typically run about 60k of unintelligible SOAP-wrapped xml. So I would prefer to avoid querying this system directly. These two systems publish events to help us integrate with other systems, mainly an ERP system. One of these events contains all the data necessary for the search screen. I proposed the following alternative: However I am being told that 'adding another database' will create more maintenance down the road. However, I believe this to be false, as I had to add a relatively simple feature that took several hours longer than anticipated because of this merging code. I want to get a feel for which system is more maintainable in the long run. I personally have not had the burden of maintaining any large system. I want something more than my gut. Specifically I'd like to know if having more, specialized physical databases is more or less maintainable than having less larger physical databases.

  Read the article

• What kind of position matches my skills, experience and interests? [closed]

  - by Ryan

  I work in a large firm and my current job covers a variety of different duties. Due to several factors I am seriously considering finding a new job (hours, pay-cut, limited career growth). I have worked for the company nearly 4 years and almost 2 years ago I transitioned into more of a business analyst role (previously I was working in a client facing role for our audit group). In this role I have overseen all aspects of the development of a large scale re-platforming of our firm's key tool in analyzing investment portfolios. I gathered requirements, wrote specs, designed the UI and functionality, worked closely with developers (onshore and offshore) to see to it the implementation was correct, managed schedules and was the lead tester. This is a large scale system used by thousands of people around the world. I've also written Excel macros, reports in SQL, given trainings, written technical manuals, interfaced with senior managers and partners, etc. I've been on a couple interviews sporadically, most of which were for positions aimed at higher management consulting type positions, dealing with strategy, overall process management, project management, etc. What really interests me is the technical stuff and overseeing a project from beginning to end (although I would rather not have to do so many of the tasks on my own). I genuinely like a lot of what I do, but the company culture and attitude towards overworking people combined with my recent pay-cut (my overtime was cut due to a promotion to a higher level) has lead me to want to seek work elsewhere. The problem is - what type of work could I realistically do? I feel like traditional business analysis is too much business and not enough tech stuff, and I've really taken a shine lately to beefing up my programming abilities and creating small programs to automate things around work. I also feel that because my actual years of experience as a business analyst (figure 1.5 years realistically) puts me at a junior level doing a lot of grunt requirements gathering, when the work that I have been doing with my current company is more in line with what a Program Manager does (depending on your definition I guess). So in reality, when I'm job hunting I get a bit perplexed because I feel like the traditional BA stuff wouldn't really suit me, and even if it did it's usually something along the lines of 5-10 years experience for the type of work that is similar to what I've done (and I've also found most BA jobs to be contract only which at the moment I'm not too keen on). Program Manager is something that interests me, but again I feel like the experience is lacking because that's a much more senior position. Am I in some kind of career no-man's land? Any idea what would best suit me given my experience and abilities, as well as my interests? I plan to keep learning programming on the side, but don't expect to get a job being a straight programmer given my relative inexperience with programming.

  Read the article

• What's about Java?

  - by Silviu Turuga

  What is Java? In very short words, Java is a programming language that let you make an application that can be run on different operating systems, no matter we are talking about Windows, Mac OS, Linux or even embedded devices, such as RaspberryPi. When you compile a Java program, instead of getting a binary output as you get on other programming languages, you'll get a Java intermediate code, called Java bytecode. This is interpreted at run time, by a virtual machine that is specifically for the hardware and operating system you are using. What Java do i need? There are 5 major versions of Java: Java SE(Standard Edition) - this is what I'll use on most of my tutorials. Most of the examples will run on Java 6, but for others you'll need Java 7. Java EE (Enterprise Edition) - used for enterprise development Java ME (Micro Edition) - for running Java on mobile and different embedded devices such as PDAs, TV set-top boxes, printers, etc. Java Embedded - for some embedded devices such as Raspberry Pi, where the resources are limited JavaFX - to develop rich content User Interfaces. This is also something that will use a lot. More detailed information can be found on Oracle's website If you just want to run java applications you'll need the JRE (Java Runtime Environment) installed. If you want to program and create new applications, then you'll need the JDK (Java Development Kit).  How to check if Java is already installed? From command line, if you are on Windows, or from Terminal on Mac enter the following: java -version You should get something like this, if you have java installed on your system: java version "1.6.0_37" Java(TM) SE Runtime Environment (build 1.6.0_37-b06-434-11M3909) Java HotSpot(TM) 64-Bit Server VM (build 20.12-b01-434, mixed mode) Note: your current Java version might be different from mine. More information https://www.java.com/en/download/faq/whatis_java.xml http://en.wikipedia.org/wiki/Java_(programming_language) Next steps Install Java SDK Chose an IDE. I recommend NetBeans as it is very easy to use and also let you quickly create the GUI of your application Alternatives are Eclipse, Komodo Edit (for Mac), etc. There are plenty of solutions both free or paid. Resources on web Oracle Tutorials - lot of tutorials and useful resources JavaRanch - forum about java

  Read the article

• Unknown C# keywords: params

  - by Chris Skardon

  Often overlooked, and (some may say) unloved, is the params keyword, but it’s an awesome keyword, and one you should definitely check out. What does it do? Well, it lets you specify a single parameter that can have a variable number of arguments. You what? Best shown with an example, let’s say we write an add method: public int Add(int first, int second) { return first + second; } meh, it’s alright, does what it says on the tin, but it’s not exactly awe-inspiring… Oh noes! You need to add 3 things together??? public int Add(int first, int second, int third) { return first + second + third; } oh yes, you code master you! Overloading a-plenty! Now a fourth… Ok, this is starting to get a bit ridiculous, if only there was some way… public int Add(int first, int second, params int[] others) { return first + second + others.Sum(); } So now I can call this with any number of int arguments? – well, any number > 2..? Yes! int ret = Add(1, 2, 3); Is as valid as: int ret = Add(1, 2, 3, 4); Of course you probably won’t really need to ever do that method, so what could you use it for? How about adding strings together? What about a logging method? We all know ToString can be an expensive method to call, it might traverse every node on a class hierarchy, or may just be the name of the type… either way, we don’t really want to call it if we can avoid it, so how about a logging method like so: public void Log(LogLevel level, params object[] objs) { if(LoggingLevel < level) return; StringBuilder output = new StringBuilder(); foreach(var obj in objs) output.Append((obj == null) ? "null" : obj.ToString()); return output; } Now we only call ‘ToString’ when we want to, and because we’re passing in just objects we don’t have to call ToString if the Logging Level isn’t what we want… Of course, there are a multitude of things to use params for…

  Read the article

• Perfect is the enemy of “Good Enough”

  - by Daniel Moth

  This is one of the quotes that I was against, but now it is totally part of my core beliefs: "Perfect is the enemy of Good Enough" Folks used to share this quote a lot with me in my early career and my frequent interpretation was that they were incompetent people that were satisfied with mediocrity, i.e. I ignored them and their advice. (Yes, I went through an arrogance phase). I later "grew up" and "realized" that they were missing the point, so instead of ignoring them I would retort: "Of course we have to aim for perfection, because as human beings we'll never achieve perfection, so by aiming for perfection we will indeed achieve good enough results". (Yes, I went through a smart ass phase). Later I grew up a bit more and "understood" that what I was really being told is to finish my work earlier and move on to other things because by trying to perfect that one thing, another N things that I was responsible for were suffering by not getting my attention - all things on my plate need to move beyond the line, not just one of them to go way over the line. It is really a statement of increasing scale and scope. To put it in other words, getting PASS grades on 10 things is better than getting an A+ with distinction on 1-2 and a FAIL on the rest. Instead of saying “I am able to do very well these X items” it is best if you can say I can do well enough on these X * Y items”, where Y > 1. That is how breadth impact is achieved. In the future, I may grow up again and have a different interpretation, but for now - even though I secretly try to "perfect" things, I try not to do that at the expense of other responsibilities. This means that I haven't had anybody quote that saying to me in a while (or perhaps my quality of work has dropped so much that it doesn't apply to me any more - who knows :-)). Wikipedia attributes the quote to Voltaire and it also makes connections to the “Law of diminishing returns”, and to the “80-20 rule” or “Pareto principle”… it commonly takes 20% of the full time to complete 80% of a task while to complete the last 20% of a task takes 80% of the effort …check out the Wikipedia entry on “Perfect is the enemy of Good” and its links. Also use your favorite search engine to search and see what others are saying (Bing, Google) – it is worth internalizing this in a way that makes sense to you… Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• How to refactor a method which breaks "The law of Demeter" principle?

  - by dreza

  I often find myself breaking this principle (not intentially, just through bad design). However recently I've seen a bit of code that I'm not sure of the best approach. I have a number of classes. For simplicity I've taken out the bulk of the classes methods etc public class Paddock { public SoilType Soil { get; private set; } // a whole bunch of other properties around paddock information } public class SoilType { public SoilDrainageType Drainage { get; private set; } // a whole bunch of other properties around soil types } public class SoilDrainageType { // a whole bunch of public properties that expose soil drainage values public double GetProportionOfDrainage(SoilType soil, double blockRatio) { // This method does a number of calculations using public properties // exposed off SoilType as well as the blockRatio value in some conditions } } In the code I have seen in a number of places calls like so paddock.Soil.Drainage.GetProportionOfDrainage(paddock.Soil, paddock.GetBlockRatio()); or within the block object itself in places it's Soil.Drainage.GetProportionOfDrainage(this.Soil, this.GetBlockRatio()); Upon reading this seems to break "The Law of Demeter" in that I'm chaining together these properties to access the method I want. So my thought in order to adjust this was to create public methods on SoilType and Paddock that contains wrappers i.e. on paddock it would be public class Paddock { public double GetProportionOfDrainage() { return Soil.GetProportionOfDrainage(this.GetBlockRatio()); } } on the SoilType it would be public class SoilType { public double GetProportionOfDrainage(double blockRatio) { return Drainage.GetProportionOfDrainage(this, blockRatio); } } so now calls where it used would be simply // used outside of paddock class where we can access instances of Paddock paddock.GetProportionofDrainage() or this.GetProportionOfDrainage(); // if used within Paddock class This seemed like a nice alternative. However now I have a concern over how would I enforce this usage and stop anyone else from writing code such as paddock.Soil.Drainage.GetProportionOfDrainage(paddock.Soil, paddock.GetBlockRatio()); rather than just paddock.GetProportionOfDrainage(); I need the properties to remain public at this stage as they are too ingrained in usage throughout the code block. However I don't really want a mixture of accessing the method on DrainageType directly as that seems to defeat the purpose altogether. What would be the appropiate design approach in this situation? I can provide more information as required to better help in answers. Is my thoughts on refactoring this even appropiate or should is it best to leave it as is and use the property chaining to access the method as and when required?

  Read the article

• Profiling Startup Of VS2012 &ndash; Ants Profiler

  - by Alois Kraus

  I just downloaded ANTS Profiler 7.4 to check how fast it is and how deep I can analyze the startup of Visual Studio 2012. The Pro version which is useful does cost 445€ which is ok. To measure a complex system I decided to simply profile VS2012 (Update 1) on my older Intel 6600 2,4GHz with 3 GB RAM and a 32 bit Windows 7. Ants Profiler is really easy to use. So lets try it out. The Ants Profiler does want to start the profiled application by its own which seems to be rather common. I did choose Method Level timing of all managed methods. In the configuration menu I did want to get all call stacks to get full details. Once this is configured you are ready to go.   After that you can select the Method Grid to view Wall Clock Time in ms. I hate percentages which are on by default because I do want to look where absolute time is spent and not something else.   From the Method Grid I can drill down to see where time is spent in a nice and I can look at the decompiled methods where the time is spent. This does really look nice. But did you see the size of the scroll bar in the method grid? Although I wanted all call stacks I do get only about 4 pages of methods to drill down. From the scroll bar count I would guess that the profiler does show me about 150 methods for the complete VS startup. This is nonsense. I will never find a bottleneck in VS when I am presented only a fraction of the methods that were actually executed. I have also tried in the configuration window to also profile the extremely trivial functions but there was no noticeable difference. It seems that the Ants Profiler does filter away way too many details to be useful for bigger systems. If you want to optimize a CPU bound operation inside NUnit then Ants Profiler is with its line level timings a very nice tool to work with. But for bigger stuff it is certainly not usable. I also do not like that I must start the profiled application from the profiler UI. This makes it hard to profile processes which are started by some other process. Next: JetBrains dotTrace

  Read the article

< Previous Page | 679 680 681 682 683 684 685 686 687 688 689 690  | Next Page >