Search Results

Search found 23374 results on 935 pages for 'james may'.

Page 686/935 | < Previous Page | 682 683 684 685 686 687 688 689 690 691 692 693  | Next Page >

• Windows SBS 2008 problem

  - by MadBoy

  I was today on clients site that has Windows 2008 SBS installed with Symantec EndPoint Protection. Problem is that after I logged in tried multiple commands like services.msc, msconfig typed in "Run" but nothing was started. For the first 5 minutes i can click around Start Menu, choose some applications (non microsoft works, even control panel works). But then something happens that I can't click where I want.. i can click on Start Menu and get it active but i cant choose anything from there, everything is like blocked, i can right click on Desktop i can do many things but most of the left clicks is blocked. Even when i start TaskMgr i am able to see it but I cannot click it, can't activate it or anything. It acts very very weird. It's newly installed system, with less then a month of when it was installed and it wasn't really used (been down most of the time). I suspect Symantec EndPoint protection might be faulty so when I go back there (Wednesday) I will uninstall it but maybe someone else have some ideas what may be happening. I doubt there's any virus or anything, symantec was installed right after setting everything up and running.

  Read the article

• Troubleshooting iptables and configuring it to drop the priority of long-term connections

  - by intuited

  I'm somewhat familiar with the general concepts of iptables, and would like to learn it in more detail. I'm hoping that my learning experience can also be useful. The situation: I'm running dd-wrt on my router. Despite its purported QoS skills, I'm still seeing connection latency shoot up hugely whenever there's an ongoing http connection, eg some large download. Under such conditions, it can take 10 seconds or more to load a basic webpage; sometimes the connections are dropped entirely. I've tried adjusting the parameters, dropping the allotted bandwidth for up and download to well under my limit, but nothing seems to work. dd-wrt is configured to use HTB as the QoS algorithm; HFSC, although presented as an option, seems to cause the router to crash, and is rumoured to not actually work on any linux system. I'd like to be able to troubleshoot this issue and hopefully improve the settings that dd-wrt is using, but I'm finding the learning curve a bit overwhelming. For starters I am not sure what HTB actually specifies: is this a set of iptables commands, or do some of those commands specify how HTB is to be used? I would like it to prioritize based on protocol the way that it already supposed to, and in addition I'd like to have it drop the priority of connections which have a high total byte count, say over 400KB. Also tips on utilities that can be run under dd-wrt to get more info on what's going on in there are appreciated. I've tried to get iftop to work but there were issues running curses. I'm leaning towards replacing dd-wrt with openwrt; comments on this strategy are also welcome. I suspect that I would be well advised to get a second router as a standin before trying that. It may be worth noting that my total bandwidth is pretty limited (256Kbit/s).

  Read the article

• Laptop GPU apparently blew up, motherboard doesn't even turn on its power LED. [But..]

  - by leladax

  EDIT: (Was: Laptop automatic shutdown after 2 seconds) If I take out the GPU, the motherboard LED turns on but then [if it attempts to power up and boot] it turns off after 2 seconds [fans turn on normally in that short period]. [Without the GPUs out there's not even an attempt to boot.] It's an SLI motherboard for a toshiba (model X200-219). If I take out one of the GPUs (they are on top of each other) it surprisingly lets the motherboard turn on too (as it is if both are out) but it still turns off after 2-3 seconds, same behavior. I wonder if it's the GPU that produces the 'turn off after being on' behavior and not something else. [Has anyone seen this behavior with blown up GPUs or could it be something else?] Previous question (before EDIT. Sorry, but someone thought it productive to lock the other one as duplicate): I'm trying to insvestigate which component produces this behavior. Other indications show it may be the GPU but I wonder if anyone knows more. It's a Toshiba Satellite X200 description: AC power shows the power being fed normally, when turned on the fan works and it appears to be starting up but after 2 seconds it shuts down with only the 'AC power connected" led on. -- seconds are about up to 4,maybe not 2 exactly.

  Read the article

• Hostname and SSL (apache) issue on Debian

  - by user105566

  I have been trying to setup SSL virtual host ServerAdmin [email protected] ServerName moclm.tap.pt DocumentRoot /var/www/tapme/ <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> <Directory /var/www/tapme/> Options -Indexes FollowSymLinks MultiViews AllowOverride All #Order allow,deny #allow from all </Directory> SSLEngine on SSLCertificateFile /etc/ssl/moclm.cer SSLCertificateKeyFile /etc/ssl/moclm.pem </VirtualHost> For some reason, the server automatically redirect to SSL (http:// to https://). The apache is not configured to redirect and application was working fine on port 80 only. I have no knowledge how the internal network works as i am working remotely. The SSL error logs show: [Tue Oct 02 22:40:32 2012] [error] Hostname linemnt01.tap.pt provided via SNI and hostname moclm.tap.pt provided via HTTP are different I thought may be the hostname has some issue and have changed the hostname of the server from "linemnt01.tap.pt" to "moclm.tap.pt" but the issue is still there. I am getting the following error on browser: Bad Request Your browser sent a request that this server could not understand. i have /etc/hosts: 127.0.0.1 localhost.localdomain localhost moclm.tap.pt moclm and openssl returns: openssl verify -CAfile cert-CA.cer moclm.cer moclm.tap.pt.cer: OK I have been trying to troubleshoot the issue but no luck. Need help Thanks

  Read the article

• Kerberos & localhost

  - by Alex Leach

  I've got a Kerberos v5 server set up on a Linux machine, and it's working very well when connecting to other hosts (using samba, ldap or ssh), for which there are principals in my kerberos database. Can I use kerberos to authenticate against localhost though? And if I can, are there reasons why I shouldn't? I haven't made a kerberos principal for localhost. I don't think I should; instead I think the principal should resolve to the machine's full hostname. Is that possible? I'd ideally like a way to configure this on just one server (whether kerberos, DNS, or ssh), but if each machine needs some custom configuration, that'd work too. e.g $ ssh -v localhost ... debug1: Unspecified GSS failure. Minor code may provide more information Server host/[email protected] not found in Kerberos database ... EDIT: So I had a bad /etc/hosts file. If I remember correctly, the original version I got with Ubuntu had two 127.0. IP addresses, something like:- 127.0.0.1 localhost 127.0.*1*.1 hostname For no good reason, I'd changed mine a long time ago to: 127.0.0.1 localhost 127.0.*0*.1 hostname.example.com hostname This seemed to work fine with everything until I tried out ssh with kerberos (a recent endeavour). Somehow this configuration led to sshd resolving the machine's kerberos principal to "host/localhost@\n", which I suppose makes sense if it uses /etc/hosts for forward and reverse dns lookups in preference to external dns. So I commented out the latter line, and sshd magically started authenticating with gssapi-with-mic. Awesome. (Then I investigated localhost and asked the question)

  Read the article

• How can I disable the CTRL-ALT-DEL key combination completely on XP/Vista/7?

  - by Travesty3

  I have been googling extensively to figure this out, and nobody seems to be able to give a direct answer. Let me start by saying that I'm NOT talking about requiring CTRL-ALT-DEL to enter logon information. I'm working on a golf simulator program which is used at golf centers. I need the ability to completely disable the CTRL-ALT-DEL key sequence so that the golf center customers can't get out of the program and access the computer at all. I realize there are other key combinations that need to be handled as well, we already have this entire feature working in XP, but we're going to be switching to Windows 7 soon, and CTRL-ALT-DEL is the only one that doesn't seem to work in Win7. I'd really like an all-around solution if at all possible. This same program may also be installed on a client's personal computer for an in-home golf simulator, but the computers that really need this feature (golf center computers) are provided to the golf center by us, so would the best option be to write a new shell? I don't know anything about that at all, other than others that suggest writing a new shell for kiosk mode. I'd really like a simpler option, like modifying the registry in some way. I have heard that you can remove some buttons from the menu screen that pops up, but unless I can remove pretty much all of them (including the shutdown/restart button in the bottom-right corner), this won't be enough of a solution for me. Thanks for taking the time to read this and thanks again for any help you could provide! -Travis

  Read the article

• Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

  - by Dmitry S

  Not sure if this question should be asked here or on SuperUser but if we get an answer here it may be useful for others here I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option. Thanks in advance.

  Read the article

• Refresh file access time under Linux / Discard disk read cache

  - by calandoa

  I am making use of the access time to analyse some build process, but it is not working the way I want: the access time is updated the first time I read the file, then it stays the same for a long while, or until the next reboot. For instance: $ ll -u some_file -rw-r--r-- 1 root root 1.3M 2010-04-07 10:03 some_file $ grep abcdef some_file $ ll -u some_file -rw-r--r-- 1 root root 1.3M 2010-04-07 11:24 some_file # The access time is updated # waiting a few minutes... $ grep abcdef some_file $ ll -u some_file -rw-r--r-- 1 root root 1.3M 2010-04-07 11:24 some_file # The access time has not been updated :( I suppose that the file is buffered by Linux in the free memory, the only this copy is accessed the subsequent times for speed reasons. A solution would be to discard the buffers in memory. After searching some forums, I found: sync echo 1 > /proc/sys/vm/drop_caches echo 2 > /proc/sys/vm/drop_caches echo 3 > /proc/sys/vm/drop_caches But it is not working, it seems that it only sync up the write buffers, not the read ones. May be it is due to some custom kernel configuration on my distro (fedora 9)? Or I am missing something here? Is there a way to achieve this access time refresh? Note also that I do not want to simulate some writes on my entire file tree. Because I am using some makefile based build system, this will cause the entire project to be build again.

  Read the article

• PDFs and Networked Printers

  - by Bart Silverstrim

  Weird issue. We have users printing to networked windows-shared printers (print server Win2003 sp2). Some users have been reporting recently that they can't print PDF documents to particular printers (two example printers are HP 2430 PCL 6 driver and 4250 PCL 6 driver). At first, we found that on many of these systems the "Everyone" object was added to the permissions for the root of the C: volume but had no permissions checked. We added modify privileges to it (these are Deep-Freeze systems, so modifications to these systems that we don't add as administrators won't matter) and they seemed to be able to print. Perhaps Acrobat Reader was writing a temp file for printing where users didn't have permission, we surmised, and made the change and moved on. Yesterday the user called in saying it's not working still. Looked at it; bring up a PDF, click Print and the reader app says that you have to install a printer. Look at the printers folder (Windows XP workstation), and it has printers installed. Print a test page, return to AcroReader, and it will print fine to that printer. The whole time web pages, MS Office documents, etc. print without issue to the same printers. Has anyone seen this issue with Acro Reader 9 and certain network printer drivers or shares involving HP printers? I'd post this to SuperUser but it seems to be associated with a networked printer issue, seems to affect subsets of users but may be more widespread and our users aren't reporting it to us assuming we just know about it, and I've not found rhyme or reason as to why it's affecting just PDF printing and particular printers. The print spoolers are all running on the workstations and print server without errors being logged so far, but I'm going through the logs now to see if I can find anything out of place.

  Read the article

• Change the number of consecutive frequent ssh login before temporary blocking the user login

  - by Kenneth

  my server currently would temporarily refuse a user to login for certain amount of time (maybe ~20min) if the user consecutively frequent ssh login for 3 times. Can I change this behaviour (say relaxed the definition of frequent maybe from 'within 5 sec' to 'within 10 sec'; or increase the # of consecutive login from 3 to 5)? Thanks. Added: Ah.. now I think the problem was not with the ssh. I just tried on another newly installed server. consecutive successful login won't block the user. I have no sudo permission on the server I mentioned above. Now I suspect this behaviour may cause by the firewall in the system. Thanks everyone's comments. ADDED 2: Ah... after some searches. I think the server is using /sbin/iptables to do it as I can see the iptables program is there even though I don't have permission to list the rules. Thanks everyone, special thank to jaume and Mark!

  Read the article

• Setting up vncserver on OpenSolaris zone

  - by k.park

  I am running OpenSolaris 5.10 and set up a sparse zone(inherits most of bin directories from global zone). I ended up copying many etc and var files from global zone, eventually most of the stuff(firefox,gvim, etc.) working through ssh via X11. However, I am having problems setting up vncserver on the zone. This is what I get if I tried to start the vncserver. vncext: VNC extension running! vncext: Listening for VNC connections on port 5911 vncext: created VNC server for screen 0 Fatal server error: could not open default font 'fixed' _X11TransNAMEDOpenClient: Cannot open /tmp/.X11-pipe/X11 for NAMED connection _X11TransOpen: transport open failed for local/%zone%:11 xsetroot: unable to open display '%zone%:11' _X11TransNAMEDOpenClient: Cannot open /tmp/.X11-pipe/X11 for NAMED connection _X11TransOpen: transport open failed for local/%zone%:11 _X11TransNAMEDOpenClient: Cannot open /tmp/.X11-pipe/X11 for NAMED connection _X11TransOpen: transport open failed for local/%zone%:11 _X11TransNAMEDOpenClient: Cannot open /tmp/.X11-pipe/X11 for NAMED connection _X11TransOpen: transport open failed for local/%zone%:11 vncconfig: unable to open display "%zone%:11" twm: unable to open display "%zone%:11" xterm Xt error: Can't open display: %zone%:11 I already chmoded /tmp/.X11-pipe with 777, and there is no pipe in /tmp/.X11-pipe or /tmp/.X11-unix directory. Here is my cat /etc/release: OpenSolaris 2009.06 snv_111b X86 Copyright 2009 Sun Microsystems, Inc. All Rights Reserved. Use is subject to license terms. Assembled 07 May 2009 BRAND: ipkg

  Read the article

• Setting up CIFS ISO Repository for Xen

  - by user85610

  I recently started working with Xen, to try to make better use of an extra desktop box for development testing. I'd like to be able to do OS installs on it without having to burn discs, but I'm having some trouble actually being able to get it to boot OS ISOs from a Windows share. My Windows box is running Win 7, and it's on a domain. I created a CIFS ISO SR in Xen, specifying the correct username and password to use. Xen is able to scan the share, and I see the ISOs that are in the folder, and can select them in the list in XenCenter. However, when I try to start the VM, I get "Error: Starting VM 'linxcentos' - INVALID_SOURCE - Unable to access a required file in the specified repository: file:///tmp/cdrom-repo-hIz-H7/isolinux/vmlinuz." I tried booting a different Linux ISO and got the same result. I know that the ISOs are valid because I was able to install them without issue when I tried VMWare ESXi earlier. What am I missing here? It's Xen/XenCenter 6 and I'm trying to install the newest version of Centos. I may end up burning it for now, but I'd like to get this to work, at least just for the principle of not letting mysterious behaviors go unsolved...

  Read the article

• can not connect to SQL running on amazon ec2 machine

  - by njj56

  I am using SQL managment studio 2008 running on an Amazon EC2 machine. I am unable to connect to the database in my asp.net application. The EC2 instance has been set to accept connections over the SQL port. I am also able to remote the machine as well as view websites hosted on the server. Listed below is part of the connection string relating to this instance. When the program is ran and this connection string is called, it returns tcp error 0 - no return response. it just times out. <add name="ProjectServer" connectionString="Data Source=*IP ADDRESS HERE*,1433;Initial Catalog=*Catalog Name*;User ID=IP-0A6ED514\Administrator;"/> I removed the ip and the catalog name for the example, but I am sure they are correct. The only thing that I could think may cause an error, is the differences in names between the user id and the server name - the server name is ip-0A6ED514\sharepoint but the user name is ip-0A6ED514\administrator when I log into the sql server manager on the EC2 instance. A password is not used. Not sure if I would need to leave in a blank string for password - also not sure if the difference between server name and user id to log in makes a difference. Any help is appreciated. Thank you. update - when this connection string is used with out the port, i get tcp provider error 40 - when the port is in there, i get error 0 edit- the sql server is using windows authentication - does this make a difference? Usually I always use SQL server authentication

  Read the article

• managing a high traffic media sharing website

  - by Jordan Westerman

  i'm in the process of developing a website that i predict will generate a lot of traffic. the site will be similar to many other sites offering free media streaming: mp3's. we are going to start with a pretty minimal amount of media to share, but the basic idea is that artists will set up a profile page with music they have made available for consumers to visit the page and listen to the music. we are starting with just a handful of artists, but i think that this project will generate more and more artist pages. eventually i'd like to set it up so consumers can create personalized playlists. how can i best prepare server space and bandwidth capabilities? i have a small team of web designers and programmers working on the site, as i am pretty illiterate when it comes to site management. as the ring leader of this organization, i am more or less looking for financial requirements and monthly burn rate estimates. i don't have a ton of capitol to start with, putting together a business plan, but i am seeking investments. i have a game plan to grow fast enough to be successful, and slow enough to manage the financial growth requirements. any questions i may have failed to ask myself? is it realistic to start this project on a shared server, and upgrade? any financial advice you think i can use? i really appreciate any advice given, as this is my first business venture. thank you all in advance. Jordan Westerman D.B.A. Badfish Productions, LLC

  Read the article

• Group Policy installation failed error 1274

  - by David Thomas Garcia

  I'm trying to deploy an MSI via the Group Policy in Active Directory. But these are the errors I'm getting in the System event log after logging in: The assignment of application XStandard from policy install failed. The error was : %%1274 The removal of the assignment of application XStandard from policy install failed. The error was : %%2 Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was : %%1274 The Group Policy Client Side Extension Software Installation was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the next startup or logon for this user, and this may result in slow startup and boot performance. When I reboot and log in again I simply get the same messages about needing to perform the update before the next logon. I'm on a Windows Vista 32-bit laptop. I'm rather new to deploying via group policy so what other information would be helpful in determining the issue? I tried a different MSI with the same results. I'm able to install the MSI using the command line and msiexec when logged into the computer, so I know the MSI is working ok at least.

  Read the article

• How to activate Win XP from Windows 7 compatibility mode on MacOS Parallels 5

  - by Ben Hammond

  I am running Parallels Desktop 5.0.9344 for Mac. I am running Mac OS 10.6.3 10D2094 I have bought a retail copy of Window 7 professional specifically because I need the XP compatibility. Windows 7 is installed and working. I have problems with the XP activation Windows7 'Virtual PC' does not run under Parallels (strange error about Server Execution failed 0x80080005). I have used the Parallels Transporter to convert the "Windows XP Mode Base.vhd" file into a parallels Virtual Machine. This copy of XP now starts normally, however it records itself as unregistered. There was a KEY.txt file in the same directory as the .vhd file; although this file contains a valid-looking activation key, it does not appear to activate the instance of XP. I have also tried to enter the Win7 activation key; this does not work either. I have tried calling the two phone numbers; an automated system asked me to enter 56 digits through the telephone and then accused me of being a pirate. I believe it may be possible to install Win7 via Bootcamp, start WinXP under Virtual PC, activate it and then import this activated .vhd into Parallels; but that seems a long way round, and is far from certain. What can I do to get WinXP running under Mac Parallels Desktop ?

  Read the article

• Moodle serves on IP only - will not work with mod_proxy

  - by Jon H

  I'm trying to set a moodle server up on an Ubuntu box, which already serves Plone & Trac via Apache. In my Moodle config I have $CFG-wwwroot = 'http://www.server-name.org/moodle' The configuration below works fine for the first two, but when I visit www.server-name.com/moodle I get: Incorrect access detected, this server may be accessed only through "http://xxx.xxx.xxx.xxx:8888/moodle" address, sorry It then forwards to the IP address, where Moodle functions fine. What am I missing to get the server name approach working correctly? Apache Config follows: LoadModule transform_module /usr/lib/apache2/modules/mod_transform.so Listen 8080 Listen 8888 Include /etc/phpmyadmin/apache.conf <VirtualHost xxx.xxx.xxx.xxx:8080> <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPreserveHost On <Location /> ProxyPass http://127.0.0.1:8082/ ProxyPassReverse http://127.0.0.1:8082/ </Location> </VirtualHost> <VirtualHost xxx.xxx.xxx.xxx:80> ServerName www.server-name.org ServerAlias server-name.org ProxyRequests Off FilterDeclare MyStyle RESOURCE FilterProvider MyStyle XSLT resp=Content-Type $text/html TransformOptions +ApacheFS +HTML TransformCache /theme.xsl /home/web/webapps/plone/theme.xsl TransformSet /theme.xsl FilterChain MyStyle ProxyPass /issue-tracker ! ProxyPass /moodle ! <Location /issue-tracker/login> AuthType Basic AuthName "Trac" AuthUserFile /home/web/webapps/plone/parts/trac/trac.htpasswd Require valid-user </Location> Alias /moodle /usr/share/moodle/ <Directory /usr/share/moodle/> Options +FollowSymLinks AllowOverride None order allow,deny allow from all <IfModule mod_dir.c> DirectoryIndex index.php </IfModule> </Directory> </VirtualHost>

  Read the article

• Passenger throwing undefined method `-@' for "master":String after Puppet 3.0.0 upgrade

  - by Andy Shinn

  My Puppet master is using Passenger to serve. After upgrading to Puppet 3.0.0 I am getting the following error: [ pid=17576 thr=70231398486460 file=utils.rb:176 time=2012-10-01 17:37:12.892 ]: *** Exception NoMethodError in PhusionPassenger::Rack::ApplicationSpawner (undefined method `-@' for "master":String) (process 17576, thread #): from config.ru:7 from /usr/lib/ruby/gems/1.8/gems/rack-1.4.1/lib/rack/builder.rb:51:in `instance_eval' from /usr/lib/ruby/gems/1.8/gems/rack-1.4.1/lib/rack/builder.rb:51:in `initialize' from config.ru:1:in `new' from config.ru:1 My config.ru is as follows: # a config.ru, for use with every rack-compatible webserver. # SSL needs to be handled outside this, though. # if puppet is not in your RUBYLIB: # $LOAD_PATH.unshift('/opt/puppet/lib') $0 = "master" # if you want debugging: # ARGV << "--debug" ARGV << "--rack" # Rack applications typically don't start as root. Set --confdir to prevent # reading configuration from ~/.puppet/puppet.conf ARGV << "--confdir" << "/etc/puppet" # NOTE: it's unfortunate that we have to use the "CommandLine" class # here to launch the app, but it contains some initialization logic # (such as triggering the parsing of the config file) that is very # important. We should do something less nasty here when we've # gotten our API and settings initialization logic cleaned up. # # Also note that the "$0 = master" line up near the top here is # the magic that allows the CommandLine class to know that it's # supposed to be running master. # # --cprice 2012-05-22 require 'puppet/util/command_line' # we're usually running inside a Rack::Builder.new {} block, # therefore we need to call run *here*. run Puppet::Util::CommandLine.new.execute Any idea what may be happening?

  Read the article

• Secondary backup server

  - by verdy

  I've been given a task to implement a backup solution in the event of our website goes down. It is a dedicated server running centos 6. From what i've experience on our server, our server may go down because of PHP application crash or hardware failure. I have couple of questions: In the first case, is it possible to get the server restart the PHP automatically, how can I do that? Because in my mind, if it is only the application that goes down, probably I can still make use of the server itself. In the second case, can I redirect a request to a secondary server? How can I do that? What do I need other than another server? For now it is gonna be a simple server which shows the user a static landing page so later the system notify us via email that the primary server went down so that we can restart the server manually. Is it possible to setup just a vps or even a shared server for the secondary server ? As I think there is only gonna be a static page. Thanks. Any help would be much appreciated

  Read the article

• Windows 7 hangs while loading desktop

  - by Joshua

  I am facing a weird problem. My computer hangs while loading the desktop, and only the background shows up; no icons or bars load. If I power the system on and off about 4-6 times, I may be able to use it normally. The desktop loads normally after rebooting or in safe mode; this only occurs when I start the system normally. I've tried several things to fix it, such as removing all start-up items, but it still doesn't solve the problem. What should I do? I found three major errors in Event Viewer: Source: Microsoft-Windows-DistributedCOM Level: Error DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server: {7D096C5F-AC08-4F1F-BEB7-5C22C517CE39} Source: Microsoft-Windows-DistributedCOM Level: Error DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server: {7D096C5F-AC08-4F1F-BEB7-5C22C517CE39} Source: Service Control Manager Level: Error The Network List Service service depends on the Network Location Awareness service which failed to start because of the following error: The dependency service or group failed to start.

  Read the article

• 1 document pending in printer queue in System Tray that won't go away

  - by White Phoenix

  Edit: I didn't want to do it, but I restarted my computer - cleared the problem right away. Though if I were running a Windows 2003/2008 server, I would hate to have to restart the domain controller just to get rid of this irritating problem. If I run into this problem again, I'm going to try that remove printer/reinstall printer thing. Thanks for your help @Psychogeek. Points for your attempt. Running Windows 7, 32-bit Professional. My printer is an HP OfficeJet Wireless 8500. It's connected to my network wirelessly through TCP/IP as a standalone device. I was having some print problems awhile back and had to do some print spooler stuff as part of my troubleshooting (stopping the Print Spooler service, clearing the print spooler files from C:\Windows\System32\spool\PRINTERS and then restarting the service). I've finally narrowed it down to it being application specific, so that's that. However, as a leftover from all that troubleshooting, my printer icon is stuck in the tray - when I mouseover the icon, Windows says that there is 1 document(s) pending for my username. However, when I open up that printer's queue, there's nothing in there. I restarted the Printer Spooler service and also checked C:\Windows\System32\spool\PRINTERS if there's anything in there - nothing. I did a quick Google search and an answer from one of those "reps" at the Microsoft Socialnet site says for me to uninstall and reinstall the printer. The funny thing is, when I send print jobs, they print just fine - that 1 mystery document stuck in queue isn't stopping anything from happening. Short of having to do that, are there any other quick troubleshooting steps I may be missing?

  Read the article

• Every minute incoming, rejected connections to SMTP

  - by joltmode

  I have a feeling my server is being lazily DDoS'ed, though, I have never experienced it before, so, I may be wrong. Every minute, my journal logs the following 3 entries: Nov 05 21:10:47 <host> postfix/smtpd[11220]: connect from webmail.onvoy.com[199.199.18.10] Nov 05 21:10:47 <host> postfix/smtpd[11220]: NOQUEUE: reject: RCPT from webmail.onvoy.com[199.199.18.10]: 454 4.7.1 <tg@<DOMAIN>>: Relay access denied; from=<> to=<tg@<DOMAIN>> proto=ESMTP helo=<webmail.onvoy.com> Nov 05 21:10:47 <host> postfix/smtpd[11220]: disconnect from webmail.onvoy.com[199.199.18.10] Where <host> and <DOMAIN> are hidden. <DOMAIN>, though, is a domain registered with my NS that resolves to my box. How do I get rid of the messages and the related connections?

  Read the article

• Network Explorer Intermittently Fails to Display all Computers in Work Group

  - by graf_ignotiev

  I run a small computer lab of 10 computers and occasionally, when using the network explorer (a.k.a Network Browser) some or all of the remote computers will fail to appear. If I try to access a remote computer by its name I get an unspecified error (code 0x80004005), but I am still able to access it with the computer's IP address. The strangest part is that the problem will inexplicably go away after waiting awhile. Each computer is running Windows 7 x64 Enterprise and has identical hardware, software and configuration. They are all on the same subnet and in the same workgroup. I've spent days researching the problem and have tried the following solutions: Updated the BIOS, chipset and network adapter drivers Changed Power Settings in Network Adapter Properties so that the computer will not turn it off Disabled the Computer Browser service Changed the DHCP node type to broadcast Reviewed the Event Viewer logs Steps 3 and 4 have seemed to help the problem a little bit, but not completely. I'm beginning to suspect that the problem might lie with our router which is a ZyXEL ZyWALL 2WG, as the packets sent by Network Discovery may not be returning in time, but I wanted to get some perspective in the issue before I went any further.

  Read the article

• How to set up QoS on ADSL router (terracom) for prioritizing browsing

  - by DBZ_A

  I want to configure the ADSL router which connects 10+ machines to the internet. I want to give maximum priority to browsing (ports 80,443) and set low priority for bittorrent etc.(port 42180) I have been experimenting with settings , but with no luck. There are three settings which confuse me, along with my understanding. 802.1 Priority - Related to LAN level, possible values 0-7 , higher numbers means higher priority. 'Mark traffic priority' - clueless about this. IPP/DS - IP Precedence - possible values 0-7 ; 6 & 7 are reserved, so set 5 for highest priority. Or when using DSCP - set 46 for highest priority. Please help me in getting this done... Similer question for another model of router here , but with less number of confusing options :) How to configure QoS on home router Update: from discussion on another thread, QoS can control only upstream traffic (from router to the internet) , while this may in turn affect downstream traffic rate, there is no direct control over data coming into the router.

  Read the article

• SpamAssassin bayesian score discrepancies

  - by CaptSaltyJack

  This makes my brain hurt. For some reason, SpamAssassin is giving high scores to certain emails, but when I test them on the command line, they get a low score. This one particular email has this in the header: X-Spam-Flag: YES X-Spam-Score: 8.521 X-Spam-Level: ******** X-Spam-Status: Yes, score=8.521 tagged_above=-9999 required=5 tests=[BAYES_99=3.5, BAYES_999=0.2, HTML_MESSAGE=0.001, NO_RECEIVED=-0.001, NO_RELAYS=-0.001, RAZOR2_CF_RANGE_51_100=0.5, RAZOR2_CF_RANGE_E8_51_100=1.886, RAZOR2_CHECK=0.922, URIBL_RHS_DOB=1.514] autolearn=no Yet when I dump the raw email into a file msg and run sudo su amavis -c 'spamassassin -t msg', I get this output: Content analysis details: (3.8 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 1.5 URIBL_RHS_DOB Contains an URI of a new domain (Day Old Bread) [URIs: cliobeads.com] -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP 0.0 HTML_MESSAGE BODY: HTML included in message -0.0 BAYES_20 BODY: Bayes spam probability is 5 to 20% [score: 0.1855] 1.9 RAZOR2_CF_RANGE_E8_51_100 Razor2 gives engine 8 confidence level above 50% [cf: 100] 0.5 RAZOR2_CF_RANGE_51_100 Razor2 gives confidence level above 50% [cf: 100] 0.9 RAZOR2_CHECK Listed in Razor2 (http://razor.sf.net/) I'm really confused as to why when the email comes in, it gets a completely different score attached to it than when I run spamassassin -t. Is there some other way I should be testing emails? Also, my users have the ability to drag false positives into a folder called "False Positives," and every day a cron job fires off that runs this on every message in every user's folder: sa-learn --dbpath=/var/lib/amavis/.spamassassin --ham /tmp/*-*.eml >/dev/null I ran sudo locate bayes_toks and there's definitely only one bayes DB on the system, in /var/lib/amavis/.spamassassin. I'm clueless, any help would be great and may help restore my sanity!

  Read the article

< Previous Page | 682 683 684 685 686 687 688 689 690 691 692 693  | Next Page >