Search Results

Search found 7931 results on 318 pages for 'hardware rec'.

Page 69/318 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

  • SEAGATE Barracuda 7200.11 HDD not running

    - by Dane411
    After a huge research, I'm stuck at the beggining of getting my HDD data back. Whats happening to me is that in the moment when I plug the power wire to my external 1TB SEAGATE Barracuda 7200.11 ST31000333AS HDD Fw LC15, it makes the sound like it's spinning to almost full speed and then shuts down and spins up again, and so on. It's well known that those HDDs have a bad firmware that someday randomly fails. There are like 2 main problems identified, BSY (busy) state, and LBA0 error. Last time I connected it to power nothing happened, it didnt try to start at all, is it that so called bricked state? I guess my HDDs error is the first one, but I dont really know if what I described is that BSY state or not, neither I know how to check it. How could I know it? Thank you so much!

    Read the article

  • System beeps continuously if both RAM sticks inserted

    - by JGB146
    I have two sticks of OCZ 2GB PC2 9600 RAM. When I attempt to boot with both sticks inserted, I am met with a continuous string of system beeps (and no bootup). The system boots fine when only one stick is inserted, but obviously that leaves me with less RAM than I'd like to have. What could the problem be? System specs are: Gigabyte GA-EP45-UD3L Intel Core 2 Quad Q9400 Sticks of OCZ 2GB PC2 9600 RAM Zotac GeForce GTS 250 1GB 2x Seagate 500GB SATA HDs

    Read the article

  • Why didn't cable select work?

    - by jldugger
    I got roped into doing tech support for a friend of the family. Obviously I'd already failed to hide my powers, ala Penny Arcade. Anyways, the guy bought a DVD burner OEM from Microcenter, and asked me to install it. So I stopped by before and thought I'd be slick and use Cable Select on the jumpers. I didn't get a chance to test it before it I had to leave, and it seems that this didn't work. I came back this week to investigate, and he explains he's confused how none of the software he downloaded was able to burn. So on a whim I switch it to explicit master / slave, and it starts working fine. Whoops. Well, at least it's not the extra crap he found and downloaded for free from the internet. Why doesn't setting both jumpers to Cable Select solve this?

    Read the article

  • HP ML150 G6 upgrading RAM/CPU beyond specs?

    - by Morten Green Hermansen
    I am being told that some limits on some HP servers can be crossed. Do any of you have any experience with that? A ML150/G6 is limited to 48GB RAM but I have been talking to a German company that guaranties me that this server will be able to be upgraded to 384GB RAM (using 32GB memory modules and 2 CPUs) http://www.compuram.de/en/memory,HP+%28-Compaq%29,Server,Proliant,ML150+G6.htm Can this really be true? The server that I have is using E5504 CPUs but will I be able to upgrade to any CPU that is using a LGA1366 socket? All from a low wattage L5640 all the way to the 6 core, high wattage versions like an X5650? (If cooling and power is adequate ofcause). Is there any limitation with powerregulators and chipset (Intel 5500). I am looking forward to any reply. Thanks in advance and best regards, - Morten Green Hermansen, Fanitas

    Read the article

  • How to set up raid monitoring on a Adaptec AAC-RAID on a Dell?

    - by pjz
    I've got Debian on a Dell with an Adaptec RAID: AAC0: kernel 4.1-0[7417] AAC0: monitor 4.1-0[7417] AAC0: bios 4.1-0[7417] AAC0: serial 4edf09 scsi2 : aacraid Vendor: CERC Model: DATA 1 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 Vendor: CERC Model: Data 2 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 I've got it set up using the fine afacli tool (ick). Is there a way to get it to email me when there's an error? Do I need to hand-roll a script for this? what's the right version of the afacli tool to use? v4.1 gets SIGABRT and exits after I ask it to 'container list' or 'enclosure list' v2.8's enclosure commands don't work either Do I need to upgrade firmware? to what? from where? how?

    Read the article

  • Lenovo remote control media redirect

    - by Braithwaite Patrick Sean
    On a lenovo ThinkServer RD240 running firmware 1.20 with the latest BNC software, using the remote console to redirect a CD-ROM fails with the error: "CD-ROM redirection is not supported on this platform". Similar error for forwarding an iso image, foppy and USB drive. I tried executing the management console from Ubuntu, Windows 7 and OS X with the exact same error. The question is: What platform does the jViewer console support any kind of media redirection?

    Read the article

  • Weird problem, special characters after formatting the hard drive, computer not starting 0_o

    - by m3taspl0it
    Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

    Read the article

  • Windows 8 isn't detecting PS3 eye

    - by JonFriesen
    I have the PS3 Eye web cam installed with drivers from Code Laboratories, which comes with a test program. When I open the test program it shows a clear picture from the webcam. Every other program does not detect a webcam. The cam shows in my device manager and as installed correctly. My question is, is there a flag or something like that I can set that will show Windows 8 that this device is in fact a camera and is working. Here is a picture of the test program that comes loaded with the drivers and the windows 8 camera app. Thanks for the help! **Here is a pic, I can't integrated because I haven't posted enough on superuser :P http://i48.tinypic.com/6qyw6t.png

    Read the article

  • Can I directly open an MMF Cash Drawer through RJ-11 port?

    - by roviuser
    My aunt bought this cash drawer at an auction recently and has tasked me with figuring how to open it via a computer. We have the key (pictured) and can open it manually, but I'd like to be able to plug it directly into a computer and open it via some sort of program or script. It has a built in rj-11 cord coming out of the back of it. Initial research shows that it might usually be used with a printer, but I want to be able to connect it directly to the computer. Edit: this needs to be able to work with windows 7. Edit2: http://imgur.com/a/czEMs imgur gallery of the innards.

    Read the article

  • Computer not working, motherboard is suspect

    - by Arlen Beiler
    I have a problem with my computer. I have a GeForce 6100 M9 Motherboard, which I suspect is broke. The capacitors beside the CPU are corroded and the computer doesn't do anything except start the fans when I push the power button. The problem is that I can't find another motherboard as they apparently don't sell this model anymore. I have tested the Power Supply and it appears to be working. Any advice would be appreciated. Different forums have mentioned that you can replace the capacitors. Any help on this would be appreciated.

    Read the article

  • postgresql solution for a server failure

    - by user1272305
    i describe the situation: i have two pc with postgressql server: - a main pc, with ip 192.168.5.1 turned on - a "backup" pc, with ip 192.168.5.1 turned off i want that the main pc saves the two identical databases in local hard drive and on a nas real-time. when the main pc has a failure, i turn on, manually, the secondary pc, that reads the database from the nas it's possible to do that? postgres: postgresql-9.1 operating system: Ubuntu 10.04

    Read the article

  • Computer always freezing after random periods of time. No errors listed.

    - by Wesley
    Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

    Read the article

  • Dell Vostro Desktop error

    - by goldenmean
    Faced a strange situation at work today. We have people sitting at a table on opposite sides, with power cables underneath the table. This morning when the person sitting opposite to me banged his feet on ground, it disturbed the power cable to my PC and it turned-off. So when I turned it on, it says, "No boot device found" Press F1 to setup or F5 to perform test... There was no physical impact/crash/fall of the desktop cabinet, which could have crashed/damaged the hard disk physically. EDIT: The OS is Windows 7 So I tried to recognize it in the Bios setup, but even there it could not find the SATA disk that is connected to this machine. So then I opened the cabinet, removed the power supply and plugged it back again. Tried to reboot, same error, "Boot device not found" It is not recognizing the hard disk. Any ideas about what might be wrong? Hard-disk crash, OS Crash(But it doesn't even go to the point of loading the disk after the initial Bios execution, so doubt this...) Any pointers about how I should proceed to troubleshoot/solve this error are welcome.

    Read the article

  • PSU died, is hard drive fried? Are other components damaged?

    - by srand
    After discovering and replacing my dead PSU, I was able to boot back into Windows. Everything seems to be working fine, however, one hard drive is not. Windows 7 says that this SATA hard drive needs to be formatted before it can work. Can the data be recovered? Also, is there a way to check the integrity of the other components of my computer or assume they will work fine?

    Read the article

  • Why are USB 2.0 devices crashing my system?

    - by BenAlabaster
    Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic baby-ATX motherboard with no identifying markings. CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. There's one stamp on the motherboard that says "Rev.B". On board it has 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. It has an 80Gb Western Digital hard drive freshly formatted and built with Windows XP Professional with Service Pack 3 and all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 crashes the machine as soon as it starts up). It's got a Daytek MV150 15" touch screen running through the VGA and COM1 with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem If I hook any USB 2.0 devices to this machine, it hangs the whole machine and I have to hard boot it to get it back up. Workarounds found I can plug the same devices into the on board USB 1.0 connectors and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions I've tried disabling all the on board devices that I'm not using - such as the on board LAN, the second COM port, the AGP connector etc. through the BIOS in an (perhaps misguided or futile) attempt to reduce the power consumption... I don't think it had any effect but it didn't do any harm. I was wondering if the PSU wattage just isn't enough to drive the USB 2.0 devices; I've seen this suggested but haven't found any confirmation that this could really be an issue - nor have I found a way to work around this issue - if indeed it is one. Any ideas? The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference. I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself. Other thoughts Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

    Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >