Search Results

Search found 3276 results on 132 pages for 'protocol'.

Page 69/132 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• controlling the bandwidth using tc

  - by Supratik

  Hi I have two NIC etho is connected to the internet and eth1 is connected to the LAN. I want to restrict the download limit using iptables and linux tc. So I wrote a test script to verify if it is working. My iptables configuration is as below. iptables -t mangle -N INBOUND iptables -t mangle -I PREROUTING -i eth0 -j INBOUND iptables -t mangle -A INBOUND -j MARK --set-mark 60 My ingress configuration is as below. tc qdisc add dev eth0 handle 1: ingress tc filter add dev eth0 parent 1: protocol ip prio 1 handle 60 fw police rate 100kbit burst 20kbit drop flowid :1 Can you please tell me what I am missing here ?

  Read the article

• How is it possible for SSD's drives to have such a good latency?

  - by tigrou

  First time i read some information about SSD's, i was surprised to learn they internally use NAND flash chips. This kind of memory is generally slow (low bandwidth) and have high latency while SSD's are just the opposite. But here is how it works : SSD drives increase their bandwidth by using several NAND flash chips in parallel. In other words, they do some data striping (aka RAID0) across several chips (done by the controller). What i don't understand is how SSD's drives have such a low latency, whereas they are using NAND chips? (or at least lot better than what a typical single NAND chip would do) EDIT: I think under-estimate NAND chip capabilities. USB drives, while powered by NAND's are mostly limited by USB protocol (which have a pretty high latency) and the USB controller. That explain their poor performance in some cases.

  Read the article

• Mounting share over VPN

  - by user1337

  I have a CentOS 5 web server which currently mounts a NFS export on my Mac OS X 10.7 laptop. It works great, except over VPN I can't get it to mount at all. I tried SMBUp but haven't been able to get it working even locally. It doesn't look like there's an easy way to install netatalk for CentOS 5. Even still, I'm not sure if that's the best way to do it. I tried using a GUI SSH client that can "mount a FTP disk" and it would work, except the files require root access and there's no external root access and the client can't elevate permissions. The basic thing I need to do is have the server be able to read the files off of my laptop, connected via VPN. The files are frequently updated (every 5-20 seconds) so I don't want to manually do that via SSH. Which protocol can work with both platforms and easily handle the latency introduced by VPN (and potentially mobile broadband)? Thanks

  Read the article

• How to manage large number of desktop VMs?

  - by symcbean

  I'm looking at the feasibility of providing remote access to multiple virtual machines. The VMs themselves will provide user desktops. To make best use of the available resources, I'd like the VMs to hibernate when the user disconnects. Which implies being able to start them up when a user connects. Ideally each user would 'own' a VM image - but if not then I'd require that the session was terminated. Obviously this would require the remote access protocol to be tied into the VM management. Is there anything out there to provide such functionality? (extra credit for open protocols! ;)

  Read the article

• Can IP v4 and IP v6 share a single physical Ethernet?

  - by sleske

  I keep reading about the transition from IP v4 to IP v6, and the possible advantages and problems. One thing that keeps popping up is "dual-stack" networking, meaning (I believe) a host can speak both IPv4 and IPv6. I don't quite understand how this works, however. Can a host actually transmit using IPv4 and IPv6 at the same time over the same physical Ethernet (like e.g. HTTP and FTP can be used simultaneously)? Or is the physical network strictly IPv4 or IPv6, with the "other" protocol sent via tunneling?

  Read the article

• Reasons for firewall alerts from ICMPv6 Local Link Address unreachable?

  - by Pulse

  For some reason I'm receiving numerous alerts, for a variety of processes, from my firewall. These are all related to ICMPv6 and are the same, apart from the process for which the alert was generated. 'Application/Process' Is trying to Access the Internet Remote Address - fe80::7191:6bd1:e5fa:58af [The Link Local Address] ICMP Type = 1 [Destination Unreachable] ICMP Code = 3 [Address Unreachable] Protocol = ICMPv6 Allow or Block If I Allow or Block, the alert never reoccurs. I understand what the various elements of these messages represent, I just can't fathom out why they are being generated. What could be the reason for these Alerts? OS - Windows 7 x86 Ultimate Thanks

  Read the article

• HTTP Live Streaming Broadcast

  - by user761389

  I'm designing an app for streaming video from a device (e.g. iPhone) via a server to one or more devices and have been researching Apples HTTP Live Streaming protocol. One thing that isn't clear is whether it is possible to stream live video (with audio) to the server and then have it streamed simultaneously in real time to the client devices. From reading the documentation and technical notes from Apple it seems like the index file needs to be created before the segmented video files can be served to a client. Is this right? If so maybe HTTP Live Streaming isn't suitable in this case, what other technologies or software should I consider? Thanks

  Read the article

• Start TLS and 389 Directory

  - by Kyle Flavin

  I'm trying to configure Start TLS on 389 Directory server, but I'm having all sorts of issues. I've been following this doc: https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Directory_Server/9.0/html/Administration_Guide/managing-certs.html which specifies that I should create a certificate for both the directory server and admin server. I've imported the CA cert on both servers. I've tried to use the same server certificate for both. It will not allow me to do so. However, the admin and directory servers reside on the same host. If I generate a new certificate it will need to use the same hostname. I'm not sure if that's valid... Has anyone out there set this up before? Any direction would be helpful. I have multmaster replication set up. From an external client, I'm attempting to do an ldapsearch -ZZ -x -h "myhost" -b "dc=example,dc=com" -D "cn=Directory Manager" -W "", and I'm getting a protocol error.

  Read the article

• Suggestion for live video stream aggregation/switching/forwarding/management software?

  - by deceze

  I'm looking for a software or system that can receive video streams from a number of cameras via a network (RTMP or similar protocol), present a visual overview of all video streams and allow me to forward/send a selected stream to another service (e.g. to a Flash Media Server, or anywhere via RTMP). Basically the digital internet equivalent of a TV studio control panel, which allows a director to put together a live show. Is there any such software at an affordable price? A GUI-less server which can be scripted to switch streams would be good too. I'm not even quite sure what kind of product category this falls into or what search terms to plug into Google. Most results I have come up with have little more than an executive summary description which doesn't tell me anything. Any suggestion welcome.

  Read the article

• Is it possible to pick out what applications that should run through a VPN in Ubuntu 9.10

  - by user31257

  Hi, I'm using Ubuntu 9.10 and I'm wondering if it is possible to pick out what applications that should use a VPN. Say for example that I want to route Transmissions connection through a VPN, but I also want to be able to access my computer over SSH via my usual static IP-adress ( running the SSH- deamon over my normal internet connection) . Is there anyway to do this? As I've been searching the web I found that at least it is possible to set whether you want both your internet connection and your "local network" to go through the VPN or if you want just the "local network" to go through it. I'm using the network-manager-pptp with the pptp- protocol.

  Read the article

• arp across subnets which devices can be detected?

  - by Gobliins

  i have some devices connected in the same physical network (LAN) but in different subnets. I want to detect them all with the ARP from my computer. My Computer is also in the same physical network but on a different subnet. ! The devices have no arp protocol installed (yet). Is it possible to detect the devices (with or withour ARP installed on every device)? If the devices have a MAC-address but no IP-address, can ARP still detect the machines?

  Read the article

• UID uniqueness of IMAP mails

  - by SecStone

  In our internal webmail system, we'd like to attach notes and contacts to certain mails. In order to do this, we have to keep track of every mail on our IMAP server. Unfortunately the IMAP standard doesn't enforce the uniqueness of the UID of a mail in a mailbox (just in subfolders). Is there any tool/IMAP server which generates UIDs which are truly unique? Or is there any other way how we can identify each mail? (the Message-ID header field is not unique as some mails do not contain such a field). Additional resources: Unique ID in IMAP protocol - Limilabs.com

  Read the article

• Can I use the same machine as a client and server for SSH?

  - by achraf

  For development tests, I need to setup an SFTP server. So I want to know if it's possible to use the same machine as the client and the server. I tried and I keep getting this error: > Permission denied (publickey). > Connection closed and by running ssh -v agharroud@localhost i get : > OpenSSH_3.8.1p1,OpenSSL 0.9.7d 17 Mar > debug1: Reading configuration data /etc/ssh_config > debug1: Connecting to localhost [127.0.0.1] port 22. > debug1: Connection established. > debug1: identity file /home/agharroud/.ssh/identity type -1 > debug1: identity file /home/agharroud/.ssh/id_rsa type 1 > debug1: identity file /home/agharroud/.ssh/id_dsa type -1 > debug1: Remote protocol version 2.0, remote software version OpenSSH_3.8.1p1 > debug1: match: OpenSSH_3.8.1p1 pat OpenSSH* > debug1: Enabling compatibility mode for protocol 2.0 > debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1 > debug1: SSH2_MSG_KEXINIT sent > debug1: SSH2_MSG_KEXINIT received > debug1: kex:server->client aes128-cbc hmac-md5 none > debug1: kex: client->server aes128-cbc hmac-md5 none > debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP > debug1: SSH2_MSG_KEX_DH_GEX_INIT sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY > debug1: Host 'localhost' is known and matches the RSA host key. > debug1: Found key in /home/agharroud/.ssh/known_hosts:1 > debug1: ssh_rsa_verify: signature correct > debug1: SSH2_MSG_NEWKEYS sent > debug1: expecting SSH2_MSG_NEWKEYS > debug1: SSH2_MSG_NEWKEYS received > debug1: SSH2_MSG_SERVICE_REQUEST sent > debug1: SSH2_MSG_SERVICE_ACCEPT > received > > ****USAGE WARNING**** > > This is a private computer system. This computer system, including all > related equipment, networks, and network devices (specifically > including Internet access) are provided only for authorized use. This > computer system may be monitored for all lawful purposes, including to > ensure that its use is authorized, for management of the system, to > facilitate protection against unauthorized access, and to verify > security procedures, survivability, and operational security. Monitoring > includes active attacks by authorized entities to test or verify the > security of this system. During monitoring, information may be > examined, recorded, copied and used for authorized purposes. All > information, including personal information, placed or sent over this > system may be monitored. > > Use of this computer system, authorized or unauthorized, > constitutes consent to monitoring of this system. Unauthorized use may > subject you to criminal prosecution. Evidence of unauthorized use collected > during monitoring may be used for administrative, criminal, or other > adverse action. Use of this system constitutes consent to monitoring for > these purposes. > > debug1: Authentications that can continue: publickey > debug1: Next authentication method: publickey > debug1: Trying private key:/home/agharroud/.ssh/identity > debug1: Offering public key:/home/agharroud/.ssh/id_rsa > debug1:Authentications that can continue:publickey > debug1: Trying private key:/home/agharroud/.ssh/id_dsa > debug1: No more authentication methods to try. > Permission denied (publickey). Any ideas about the problem ? thanks !

  Read the article

• What is your approach to draw a representation of your network ?

  - by Kartoch

  Hello, I'm looking to the community to see how people are drawing their networks, i.e. using symbols to represent complex topology. You can have hardware approach, where every hardware unit are represented. You can also have "entity" approach, where each "service" is shown. Both are interesting but it is difficult to have both on the same schema (but this is needed, especially using virtualization environment). Furthermore, it is difficult to have complex informations on such representation. For instance security parameters (encrypted link, need for authentication) or specific details (protocol type, ports, encapsulation). So my question is: where your are drawing a representation of your network, what is your approach ? Are you using methodology and/or specific softwares ? What is your recommendations for information to put (or not) ? How to deal with the complexity when the network becomes large and/or you want to put a lot of information on it ? Examples and links to good references will be appreciated.

  Read the article

• What antivirus software supports updates without an internet connection?

  - by Michael Gundlach

  I'm putting antivirus software on Windows 7 computers in the middle of Africa. The computers don't have internet access, but still need to be protected against viruses from CDs and thumbdrives. Separate from these computers is one computer that does have extremely spotty internet access. What's the best AV software for this situation? The important part, as I see it, is that we need to keep the computers up to date, but can't let the AV software suck down updates at its leisure: the computers are disconnected, and getting emails onto the connected computer is a challenge enough. We thought we might transfer update files to the connected computer using a protocol that can handle repeated connection drops (e.g. FTP with resume.) Then we'd manually apply the update files to the disconnected computers. Does any AV software support this? Is there a better solution?

  Read the article

• Vlan Tagging at Access Port in Switch

  - by singh

  I'm Confused from the fact that Vlan tagging is done at access port and trunk port always gets tagged packets (until its case of native vlan).But I still believe in other fact which says tagging happen only when a frame hit the trunk port which means trunk port gets untagged frame and tagging is not possible at access port. Would like to know where actually this tagging happens ? and also which command we can use to encapsulate 802.1q protocol to access port ? The way we do at trunk port is switchport trunk encapsulation dot1q Is the above command applicable for access mode also?

  Read the article

• VM connected to network but not to internet in VMware Player 6 on Windows 8.1 host

  - by user1257262

  So I am running Bitnami's MEAN stack in VMware Player 6.0.2 on Windows 8.1 and the VM connects just fine to the network: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG However, I am having a great deal of trouble getting the VM to communicate with the internet. No matter what sort of action I take (even something as simple as apt-get update), the machine just sits there and eventually fails to connect. Here is my VM's Network Adapter configuration: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG On my host Windows 8.1 computer, I actually have the VMware Bridge Protocol enabled but for VMware Network Adapters (VMnet1 and VMnet 8), but they are listed as having No Internet access in my Network and Sharing Center. I am not entirely sure if these adapters are relevant to connecting the VM to the internet, to be honest. This is the first time I have ever had an issue connecting a virtual machine to the internet. This problem is also happening with other VM's I am trying to run. Can someone tell me what I am doing wrong and how I can fix it?

  Read the article

• windows-server-2003, windows server, download utility from command line , http or ftp or any other p

  - by Michael

  Hello , I need to know if there is anyway utility bult-in windows 2003 that I can use from the command line to download a file using only one command. Basically I know that I can download from ftp using the "ftp" utility but in order to do that I need to do first "ftp open" and then pass the other commands so it doesn't help me because I need to do perform the download only from one command. The download may be performed through http, ftp or any other protocol. OS Name: Microsoft(R) Windows(R) Server 2003 Enterprise x64 Editio OS Version: 5.2.3790 Service Pack 2 Build 379 Thank you in advance for any answer !

  Read the article

• Improving sound quality with remote ESD server

  - by cuu508

  Hi, I'm investigating low-budget ways to get audio from my PC (Ubuntu) to HiFi without wires. I'm currently testing a setup where Asus WL-500gP wireless router runs ESD daemon and has attached USB soundcard which is then plugged into HiFi. I'm testing playback on PC with mpg123-esd and Spotify under Wine. The sound is there, latency is unexpectedly low, but I also hear occassional clicks and some distortion from time to time. I suppose that's because of the low latency and wireless streaming of uncompressed audio--any packet drops, CPU temporarily being busy etc. will cause clicks in sound output. Is there a way around this problem, increasing latency / buffer size somehow perhaps? Streaming using shoutcast protocol seems to be a way out but I have feeling that would be a complex and brittle setup.

  Read the article

• How to remove AegisP.sys

  - by NinjaCat

  When I boot my laptop, I get the following event in the error log... I cannot tell which service is trying to use the aegisp.sys file or generating this event. Can anyone shed some light? Google is not very helpful with this issue ;) Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7000 Date: 8/20/2010 Time: 10:50:03 PM User: N/A Computer: XXX Description: The AEGIS Protocol (IEEE 802.1x) v3.6.0.0 service failed to start due to the following error: The system cannot find the file specified. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• AS2 Server Software Costs

  - by CandyCo

  We're currently using Cleo LexiCom as our server software for receiving EDI transmissions via the AS2 protocol. We have 7 trading partners per year, and this runs us about $800/year for support from Cleo. We need to expand from 7 trading partners to 10 or so, and Cleo charges roughly $600 per new host, plus an expanded yearly support fee. My question(s) are: Does anyone know of a cheaper developer of AS2 server software, and perhaps one that doesn't charge per new host? Does anyone have any clue why we are being charged an upfront fee for new hosts, and if this is a standard practice for AS2 software providers? It seems really odd that we are required to pay upfront costs for this. I could completely understand an increase in the yearly support, however.

  Read the article

• Two VPN connections from the same IP address

  - by Tayles

  I have set up a server running Windows Server 2008 which two remote users can dial into using a VPN connection. It works fine unless they are both in the same location, in which case only one of them can connect. I understand this is because the PPTP protocol cannot cope with two VPN connections from the same IP address. Is this correct? If so, what can I do about it? Please note that the remote location in question is a serviced office, so we're not in a position to change or play around with their router. Thanks!

  Read the article

• Activating ssl on tomcat

  - by toom

  I want to encrypt the http traffic on a tomcat instance via ssl. Therefore I followed the most simplistic approach described on various webpages. But anyway it simply does not work. Here is what I did: "keytool -genkey -alias tomcat -keyalg RSA" and I enterd "changeit" as the password (since this is the defaut chosen by tomcat) Altering $CATALINA_HOME/conf/servers.xml by uncommenting the following line Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS"/ Restarting tomcat Entering https://localhost:8443 does not work. However, I can still access the page via normal http like http://localhost:8080 The logfile does not contain any suspicious information. What is going wrong here?

  Read the article

• Can I use Server Monitor with a non-server Mac?

  - by Chris

  I have a computer I use as a simple file and web server. I am simply desiring to be able to monitor load, traffic, memory usage, etc via Server Monitor. I have also downloaded an app for my iPhone which does the same thing, but it uses the same protocol that Server Monitor does. Is it possible to get Server Monitor to recognize my non-server box as a server so I can monitor this information? For reference, I am running 10.4.ll on this PPC box. Thanks in advance!

  Read the article

• What protocols will/are ISPs use for IPv6 deployment?

  - by rbeede

  Currently ISPs deal out addresses via DHCP for IPv4 dynamic (single) addresses. What protocol will/are ISPs going to use for IPv6 when they can hand a customer an entire /64 (or /48 if they are nice) block? DHCPv6, RA? For ISPs that support true end-to-end IPv6 will they provide gateway devices (similar to cable modem or true DSL bridges for example) that receive border information for that specific customer? I'm just trying to get an idea of how your common residential service customer will have to configure things in an IPv6 Internet (whenever that comes). Will it be something customers are expected to statically configure on their home wireless router? Today with IPv4 I do it like this: Modem (bridge) passes public IPv4 obtained via DHCPv4 from ISP to second device (wireless router). It in turn has its own DHCPv4 service it provides on the internal lan.

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >