Search Results

Search found 90974 results on 3639 pages for 'user 123'.

Page 691/3639 | < Previous Page | 687 688 689 690 691 692 693 694 695 696 697 698  | Next Page >

• How to rescue from an SD (SDHC) card that I can't reformat (possible hardware failure)

  - by sbwoodside

  I have a transcend 16GB SDHC card and a lot of photos on it that I'd like to recover. When I plug it into the SD card reader, it takes a while for the Mac to even recognize that there's a disk present, and it shows up as 1.07GB with geometry 520/64/63 (according to fdisk). First I tried file recovery: PhotoRec: no files are found (the images are in CR2 format and I'm using testdisk-6.14-WIP which claims to recognize that format under TIF) dd / ddrescue: they create a 1.07GB image, same problem as above TestDisk: doesn't find any partitions to recover I found a source saying that the correct geometry for this type of SD Card is Heads 255, Sectors/Track 63, Cylinders 1953, so I tried manually setting that geometry in PhotoRec/TestDisk. No improvement. Next I tried formatting the disk with fdisk. After writing and quitting, I ran fdisk again and it reported that the new format hadn't been saved on the disk. I also tried resetting the format/partitions with TestDisk and that failed also. The fdisk log is below. I don't really care about the card, I've already ordered a new SanDisk card. But I'd like to get the data off. Maybe, is there any way to force dd or some other tool to create an image of the disk based on the original geometry and not on what the card "thinks" its geometry is? Or am I missing something?

  Read the article

• Read-only file system RHEL

  - by gthm geeky

  I am using a RHEL 5.5 on my PC. I was playing around with chmod and chown. suddenly my home folder become read-only. all the folders in /home/goutham/, where goutham is username, became read-only. I can delete files after turning on system for few seconds, after that it says Permission denied:read only file system. I cant even create folder with sudo mkdir also. Please help me. My os is on /dev/sda3

  Read the article

• Restore XP on Acer Aspire One netbook

  - by Imran

  I have an Acer Aspire One D250 netbook which came with Windows XP (but no CD) on which I have since installed Xubuntu 9.10. Now I am trying to sell it, but I cannot find a way to recover XP. I have read in a lot of different places that holding Alt+F10 during boot should send me to a recovery menu (which will allow me to restore XP from a "secret partition"), but I have tried many times to no avail. The best I can do is get the BIOS setup screen by holding F2, but there doesn't seem to be any recovery option there. After the initial option to go into the BIOS setup GRUB starts loading and there don't seem to be any more opportunities to enter a system setup screen. Please help!

  Read the article

• Hardware Raid Card Reviews with SSDs

  - by Nalandial

  Yes I realize there are several questions about this but none of them seem to have the answer I'm looking for. I have two SSDs and am looking to buy a purely hardware raid card for them; however, I can't seem to find any reviews that have specifically tested hardware raid cards with SSDs rather than testing the SSDs themselves. I'm looking for a review because I'm assuming that for example: 100% gain with two 7200rpm drives doesn't necessarily mean 100% gain with a pair of SSDs, since there would be higher speeds, meaning more throughput, meaning more processor/memory usage for the card. If this assumption is wrong then that's fantastic; however if it's true, I am quite sad and would really appreciate any advice or reviews you can find. Thanks in advance!

  Read the article

• Partition to Image in Norton Ghost 15 ?

  - by Mohammad

  In Norton Ghost 11.5 we had an option, named Partition to Image. With this option we could back up a drive completely and easily. What's the identical option in Norton Ghost 15? P.S: I have Win7 x64

  Read the article

• Configuring SMB shares in OS X

  - by Craig Walker

  I'm at my wit's end trying to control SMB file sharing on my Mac. (OS X 10.5 Leopard). I want to do something fairly simple: share a particular (non-home, non-Public) folder over my my SMB/Windows network with two users (accounts are local to my Mac), and share no other folders with anyone. The instructions on the internet are fairly straightforward: add the folders to be shared to the File Sharing panel of the Sharing System Preferences pane: ..and ensure that I'm sharing through SMB: However, when I actually try to connect via a SMB client (Windows XP in this case), the share does not appear. I see my home directory, "Macintosh HD", and my printers, but not the folder I just shared. I ensured that the underlying directory had the proper permissions (since this seems to affect share visibility) and that the "Shared Folder" checkbox was checked: ...but this didn't have any effect. I checked /etc/smb.conf but there was nothing obviously out of place there. I've also restarted smbd and rebooted. What else should I be looking for?

  Read the article

• Does Adobe CS4 (English) have full support for East Asian language?

  - by netvope

  In particular, Chinese, Japanese and Korean. Or put it in another way, do the Chinese/Japanese/Korean versions of Adobe CS4 offer anything not included in the English version? Thanks.

  Read the article

• How do I setup a cloud server to share and sync files on ESXi hosted environment?

  - by Manoj Agarwal

  I want to setup my private cloud network for my company for syncing and sharing files. Instead of using existing players like dropbox, google drive, amazon etc. I want to setup my own cloud infrastructure. The requirement is to easily share private data internally within the organization. I already have an ESXi based cloud environment, running several virtual machines in it. Will it be feasible and achievable?

  Read the article

• Search files for text matching format of a Unix directory

  - by BrandonKowalski

  I am attempting to search through all the files in a directory for text matching the pattern of any arbitrary directory. The output of this I hope to use to make a list of all directories referenced in the files (this part I think I can figure out on my own). I have looked at various regex resources and made my own expression that seems to work in the browser based tool but not with grep in the command line. /\w+[(/\w+)]+ My understanding so far is the above expression will look for the beginning / of a directory then look for an indeterminate number of characters before looking for a repeating block of the same thing. Any guidance would be greatly appreciated.

  Read the article

• Why do I keep getting this Imagemagick error?

  - by Gkhan14

  I currently used this code for Imagemagick: convert "c:\users\****\My Documents\test.png" -transparent white test2.png However, I keep on getting two errors that look like this: convert.exe: unable to open image `c:\users\****\My': No such file or directory @ error/blob.c/OpenBlob/2641. convert.exe: no decode delegate for this image format `c:\users\****\My' @ error/constitute.c/ReadImage/550. I installed Imagemagick to my c:\ directory. What does this mean, and how can I fix it?

  Read the article

• The fastest way to encode image+audio for Youtube from command line?

  - by Pavel Vlasov

  I have an mp3 and image and I want to make a simple clip to upload onto Youtube. Is there a fast solution? If video formats are so bad designed, then maybe it is possible to use a prerendered video-only clip? This works good except it takes as much time as the audio lasts: ffmpeg -loop_input -r ntsc -i "%IMAGE%" -i "%AUDIO%" -r 1 -acodec copy -shortest -re -force_fps "%VIDEO%" This takes a second but results in a black screen video that is successfully played by a desktop video player but not acceptable by Youtube: ffmpeg -i "%IMAGE%" -i "%AUDIO%" -acodec copy "%VIDEO%" Windows 7. Preserving audio quality is preferred over video quality.

  Read the article

• Excel help vlookup

  - by user123953

  I need a little help with some excel Employee Locations Hours OT Mr.One Station 1 40 6 Mrs.Seven Station 2 30 6 Mr.Two Station 3 30 4 Mr.Three Station 4 40 4 Mrs.Eight Station 1 32 6 Mr.Four Station 2 32 7 Mrs.Nine Station 3 40 6 Mr.Five Station 4 40 7 Mr.Six Station 1 25 2 Mrs.Ten Station 2 40 3 Mr.Eleven Station 3 60 1 I have spreadsheet with to worksheets one is the data sheet (shown above) on the other sheet is a summary, that has the Locations column as data validation list. I wanna use the data validation list to pull all the people and info from a specific location. I tried using a vlookup put I only know how to use to pull one person at a time not a group of specific to a location.

  Read the article

• eSata plugged into Sata socket via adaptor cable very slow

  - by Jon

  Why would an external eSata Drive (xSonic with 500Gb notebook Hard Drive) run ok on a Silicon Image based PCI-E to eSata adaptor at about 35MB/s, But then run really slow when plugged into NForce4 Sata socket via cable? I have another version of the problem with Really slow 1MB/s!!! performance on a ASUS P5K Pro Motherboard with E8400 CPU. This time the same card is plugged into a PCI-E socket. The same eSata drive is plugged into the Esata port on the card. All this is running on Windows XP Pro 32bit. Any suggestions on how to diagnose the problems??

  Read the article

• Setting up a PC for the Kids

  - by Martin Clarke

  I recently finished building a new PC from scratch; and then I decided to treat myself to a new widescreen monitor. I'm left with a bit of a conundrum with what to do with my old box. I'm considering a few options such as a file server, putting Linux on it, putting it elsewhere in the house or giving it to a member of the family and so on. But to be honest, I don't really think it would get much use. I've started thinking about putting together something for my kids. The oldest is coming up on 4 in a couple of months and he's used my PC and Macbook (supervised!) before for playing jigzaw puzzles, babysmash and so forth. He's also uses the computer at his nursery (Kindergarden for North Americans!). So, its got me thinking about setting something up for him (bonus for his brother who is 2). I was wondering what others had done when trying to put together something for their kids? Some points for consideration: Operating System? Software? Anti-virus Internet (probably blocking?) Hardware (I've seen some keyboards designed with kids in mind)

  Read the article

• How to remap a NERDTree shortcut in VIM

  - by btelles

  Hi There, I use the Dvorak keyboard layout with VIM, and the 't' key is the 'up' motion when editing a regular file. The problem is that NERDTree remaps 't' to open files in a new tab. How can I undo that mapping and use 't' for the up motion in NERDTree? Here are the relevant lines from my vimrc file and from the NERDTree plugin. My .vimrc: no t k NERDTree plugin file: exec "nnoremap <silent> <buffer> ". g:NERDTreeMapOpenInTab ." :call <SID>openInNewTab(0)<cr>" call s:initVariable("g:NERDTreeMapOpenInTab", "t") let @h=@h."\" ". g:NERDTreeMapOpenInTab.": open in new tab\n"

  Read the article

• Excel 2003 opening files on network

  - by Luke

  The network is laid out with an XP Pro computer as the server hosting files, then 3 XP computers connecting to it for filesharing, all on it's own router. One computer can open .xls files no problem, and she runs Office XP. The other two computers run Office 2003, and cannot open any shared files by double-clicking them, or by selecting File-Open in Excel. If the file gets copied to the local computer, it opens instantly. I have tried disabling the AV on all computers, disabling the Windows firewall, and doublechecking permissions on the server. I have also tried disabling DDE, but that doesn't help at all, just like Tools-Options-unticking Ignore other applications. Any ideas? This apparently started a couple days ago

  Read the article

• Arbitrary Key Remapping on a Mac

  - by Mason

  I bought a cheap Chinese replacement keyboard for my late 2007 MBP. The close square/curly bracket key actually sends a left control signal to the Mac. So I'm trying to remap my backslash/pipe key to be close square/curly bracket but I can't find the key remapping software to do it. Double Command and KeyRemap4Macbook can't do arbitrary key remaps and uControl/fkeys don't work on Snow Leopard. Anyone have ideas? I have no problem editing text config files if necessary.

  Read the article

• I love google Chrome, but some non-static pages like Piwik render it unresponsive

  - by gogowitsch

  The web-stat software Piwik stops reacting on mouse clicks after 1-2 seconds. The same is true for Google Maps and Producteev (but GMail and most other pages work like a charm). These rely heavily on JS, and work without Flash. I can click for a very short time period and then the mouse cursor doesn't feel the UI anymore (it doesn't turn into a I over input fields, though it moves; if the freeze occured while the pointer was over an input field, the cursor keeps being a I) and all clicks on the DOM are being ignored by Chrome. No message appears, neither obvious nor in the Console (F12). There is no obstructing div or the like in the DOM (F12). Since I couldn't find any hints on the source of my problems, I suspected my plugins and extensions. Unfortunately, neither deactivating all plugins nor all extensions solved the problem. for the problematic pages, it always happens no Dropbox running several GB of free RAM the taskmanager doesn't show any high CPU or memory utilization (the offending tab uses 30 MB and uses 0-1 % CPU) all problematic pages work in other browsers (Chrome, Firefox, IE) the rest of the computer is very responsive the computers use different security suites (Kaspersky and Avira) The effect exists between several (synchronized) Chrome instances on different machines, all running Windows 7. Both the OS and Chrome are updated automatically. Other tabs and the Chrome chrome (tabs, menus, toolbar buttons of the browser itself) still work. I really don't like switching between browsers. Any ideas?

  Read the article

• Is there any reason to subnet a home network?

  - by Will

  For networks I understand we set a netmask on each computer to let it know what IPs it can talk to without going through the router - IPs on the same subnet can talk directly to each other and do not have to go through a router/switch. However, in today's home networks (and I suspect corporate networks as well) every computer is connected to a router/switch (at the low cost of today's hardware I doubt there it much of a market for wired repeaters/hubs). This seems to obviate the need for a subnet mask and subnetting. Considering that in most modern home architectures every computer goes through the router, even to talk to computers on the same network, is there any reason for me to subnet a home network?

  Read the article

• How can I dual boot a UEFI OS and a legacy boot OS, or convert stock Windows 8 to BIOS?

  - by The Great Widi

  I have a computer (HP Pavilion g6-2342dx) which came with Windows 8, and thus the new UEFI boot system. I would like to install a few OS's which are not EFI compatible, and Arch GNU/Linux with BIOS mode. However, I would not like to completely wipe all my files to set to legacy. My preferred options would be to: 1. Multiboot legacy OS alongside my EFI os 2. Convert Windows 8 and Ubuntu to legacy without reformatting or switching to MSDOS part table. If anyone could suggest a solution or a method, your help would be appreciated! Thanks!

  Read the article

• How to add new partition to RAID-1 array on Redhat FC10?

  - by Peter Scott

  I have a RH FC10 system with RAID 1 partitions, here is mdadm.conf: # mdadm.conf written out by anaconda DEVICE partitions MAILADDR root ARRAY /dev/md1 level=raid1 num-devices=2 metadata=0.90 UUID=9588bfe1:ddfd5858:1067c814:ac499922 ARRAY /dev/md3 level=raid1 num-devices=2 metadata=0.90 UUID=3895ca46:c1526588:d48acd7e:c153aa83 ARRAY /dev/md4 level=raid1 num-devices=2 metadata=0.90 UUID=ebd4920f:b46c1f18:2eced24a:a21ca861 ARRAY /dev/md2 level=raid1 num-devices=2 metadata=0.90 UUID=048e8198:5d6d9682:d3a1e5c3:d475ad80 ARRAY /dev/md0 level=raid1 num-devices=2 metadata=0.90 UUID=d89ec2de:079d4be5:e00ee8f5:fcb19188 I want to carve off 500MB from md4 to make a new partition (for an AFS cache). I haven't touched mdadm or any other disk partitioning tools in years. md4 is 50GB and less than 10% used. What's the easiest way of doing this?

  Read the article

• I split partition in Windows 7 home edition but the Windows doesn't reboot

  - by Samnan

  I Have Geniune Windows 7 home edition and my Laptop is Pavilion HP DV6 . I had only 1 partition of 500+ GB i Wanted to make another partition. I read somewhere in forum that I have to make my C: logical and then I'd be able to split C: I did the same thing using Partition Wizard. I made C: of 125 GB and shift rest of the space in New drive. I made a bootable disk, performed all the task using partition Wizard After that I have not been able to boot my windows. Even after running system restore several times.

  Read the article

• Change from IDE to AHCI after installing Windows 8

  - by Louis

  I had my drive controller configured for IDE when I installed Windows 7. This didn't change when I upgraded to Windows 8. I now need to enable AHCI, but doing so causes Windows to fail to start. It doesn't know how to automatically fix the problem. I was able to use Regedit from the recovery area, in order to try using this fix that worked for Vista. That key is missing in Windows 8, however. I read that the relevant key is now in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci. But my settings already match the changes they suggest making. How can I get Windows to boot after enabling AHCI in the BIOS?

  Read the article

• Office 2003 won't install with proper CD KEY

  - by MadBoy

  I wanted to reinstall Office 2003 Pro. I retrieved the key with NirSoft ProduKey, confirmed with Jelly Bean Windows Key Finder and the key is the same. I've tried 3 different Office 2003 PRO CD's and it still won't install because it's saying key is bad, i even tried with different key from other computer and it also won't install. Anyone can suggest some workaround?

  Read the article

• Apple Mail clones Gmail account folders and gets out of sync when tracking unread emails

  - by Petruza

  The Gmail (fc.mm.mp.lh is Gmail also) accounts that I've set up with Mail, automatically created a second folder for each of the accounts, the ones you can see in ALL CAPS at the bottom. I guess this folders represent the web mail accounts, while the folders inside Inbox represent the pop accounts, despite them being the same account. The thing is, as you can see, while the inbox accounts have no unread mails, their "all caps" counterparts show as if they had some unread mails. This is not the normal behavior; when I mark an email as read, it is "read" in both versions of the account, but from time to time, they kind of get "out of sync" and the bottom folders start to show unread emails that were actually read. Have you seen this behavior before? What can I do? I don't use the bottom "folders" but I can't get rid of them anyway. It's just that their unread messages notification annoys me because there aren't actually any unread mails.

  Read the article

< Previous Page | 687 688 689 690 691 692 693 694 695 696 697 698  | Next Page >