Search Results

Search found 21319 results on 853 pages for 'state management'.

Page 695/853 | < Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702  | Next Page >

• VMWare Host Not Responding - VMs are Disconnected (ESXi 3.5)

  - by EyeonTech

  I have inherited a VMWare environement ESX v3i 3.5. I am not fluent with VMWare ESXi so bare with me. Two days ago, when I opened Virtual Centre, one of the Hosts showed up as Not Responding. The error I am seeing is:----- Unable to acquire licenses because license source is unavailable: The license manager has not been started yet, the wrong port@host or license file is being used, or the port or hostname in the license file has been changed. What I have tried: I have Stopped and Started the license server within the application. When I do this, I am able to disconnect the host in Virtual Centre and reconnect. This brings the host back online, but a few minutes later, the host goes to a not responding state again. I have rebooted the server with the Licensing software installed. While browsing Google, I have not been able to find any steps I feel comfortable performing and I would like the opinion of the VMWare pros. Where are the log files I should be looking at to correctly determine what is going on? Has anyone seen this behaviour and how did you resolve it? Thank you

  Read the article

• Command prompt hangs/freezes/crashes sporadically

  - by Leonard Challis

  I'm finding it very difficult to Google this, I don't seem to be able to find anyone with the same issue and I don't know enough about the Windows operating system to troubleshoot. The machine(s) we are seeing the problem on are Windows 7 (professional) both 64bit and 32bit. The problem is with the command prompt freezing up, seemingly randomly. When it does freeze nothing will bring it back to life (i.e. keypress) and it's nothing to do with Quick Insert mode either. It doesn't seem to be when I run standard commands, such as cd, dir, etc, but when I run different programs from the command line. The annoying thing is that sometimes the prompt will freeze and at other times it won't, using the same program/command in the prompt. To add to the frustration, one of my colleagues who had the same problem seems to not have experienced it for a few days now (we're pretty heavy on the command line). It's not a VPN/RDP thing as suggested in other questions and forum posts, as I've seen this both locally and remotely. I thought it was to do with the return code signifying an error or some error state in the program, i.e.: C:\Users\leonardc>mysql -u lalala ERROR 1045 (28000): Access denied for user 'lalala'@'localhost' (using password: NO) but this isn't always the case either. In fact the above command hasn't crashed the shell before. Elevating the prompt to run as Administrator doesn't seem to have any bearing on the problem either. Disabling my anti-virus doesn't have an effect either. Update: I tried the same commands in PowerShell, but I still get the same problem, it will freeze at random times (more often than not, as with the command prompt, but not always). It's not the same as command prompt in the fact that one might work while the other doesn't, but then the next time I try run the same command in both it will suddenly be different again.

  Read the article

• Why is SMF manifest losing configuration data when exported on SmartOS?

  - by Scott Lowe

  I'm running a server process under SMF (Server Management Facility) on Joyent's Base64 1.8.1 SmartOS image. For those not aqauinted with SmartOS, it is a cloud-based distribution of IllumOS with KVM. But essentially it is like Solaris and inherits from OpenSolaris. So even if you've not used SmartOS, I'm hoping to tap into some Solaris knowledge on ServerFault. My issue is that I want an unprivileged user to be allowed to restart a service that they own. I have worked out how to do that by using RBAC and adding an authorisation to /etc/security/auth_attr and associating that authorisation with my user. I then added the following to my SMF manifest for the service: <property_group name='general' type='framework'> <!-- Allow to be restarted--> <propval name='action_authorization' type='astring' value='solaris.smf.manage.my-server-process' /> <!-- Allow to be started and stopped --> <propval name='value_authorization' type='astring' value='solaris.smf.manage.my-server-process' /> </property_group> And this works well when imported. My unprivileged user is allowed to restart, start and stop its own server process (this is for automated code deployments). However, if I export the SMF manifest, this configuration data is gone... all I see in that section is this: <property_group name='general' type='framework'> <property name='action_authorization' type='astring'/> <property name='value_authorization' type='astring'/> </property_group> Does anybody know why this is happening? Is my syntax wrong, or am I simply not using SMF incorrectly?

  Read the article

• MSSQLSERVER Will Not Start - Event ID 913 and 1814

  - by ThaKidd

  Hello ServerFault! I need some serious help. I have a major database server down and am scratching my head at how to fix it. The server was hit by rolling black outs last week in Dallas and sense then, Microsoft SQL 2005 SP2 will not start up. I am getting the following errors (both when starting the service and while trying to execute mssqlsrv.exe -c -f -m: Event Type: Error Event Source: MSSQLSERVER Event ID: 913 Could not find database ID 3. Database may not be activated yet or may be in transition. Reissue the query once the database is available. If you do not think this error is due to a database that is transitioning its state and this error continues to occur, contact your primary support provider. Please have available for review the Microsoft SQL Server error log and any additional information relevant to the circumstances when the error occurred. and... Event Type: Information Event Source: MSSQLSERVER Event ID: 1814 Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized. I have tried to rename the tempdb.mdf to tempdb.old with no success. I have checked and have 193 GB of free hard drive space. What else might cause this problem? Could the server need a chkdsk ran on it or do I need to be looking at some area of the database server? Any help is greatly appreciated. Thank you in advance.

  Read the article

• Nagios command not transmitting all arguments

  - by markus

  I'm using the following service to monitor our postgres db from nagios: define service{ use test-service ; Name of servi$ host_name DEMOCGN002 service_description Postgres State check_command check_nrpe!check_pgsql!192.168.1.135!test!test!test notifications_enabled 1 } On the remote machine I've configured the command: command[check_pgsql]=/usr/lib/nagios/plugins/check_pgsql -H $ARG1$ -d $ARG2$ -l $ARG3$ -p $ARG4$ In the syslog I can see that command is executed, but there is only one argument transmitted: Oct 20 13:18:43 DEMOSRV01 nrpe[1033]: Running command: /usr/lib/nagios/plugins/check_pgsql -H 192.168.1.134 -d -l -p Oct 20 13:18:43 DEMOSRV01 nrpe[1033]: Command completed with return code 3 and output: check_pgsql: Database name is not valid - -l#012Usage:#012check_pgsql [-H <host>] [-P <port>] [-c <critical time>] [-w <warning time>]#012 [-t <timeout>] [-d <database>] [-l <logname>] [-p <password>] Oct 20 13:18:43 DEMOSRV01 nrpe[1033]: Return Code: 3, Output: check_pgsql: Database name is not valid - -l#012Usage:#012check_pgsql [-H <host>] [-P <port>] [-c <critical time>] [-w <warning time>]#012 [-t <timeout>] [-d <database>] [-l <logname>] [-p <password>] Why are arguments 2,3 and 4 missing?

  Read the article

• What can cause Powershell execution policy not to be taken into account?

  - by Stephane

  We have in our infrastructure a number of powershell scripts used for various tasks ranging from user login to support technician simulating a user context. These scripts are centralized on our file server (through DFS) for easier management. Some of them are run at logon, some are run through published Citrix applications. We have applied a policy for the whole domain and all users that sets the Powershell execution policy to "unrestricted" so that the scripts can run from the file server. This works perfectly fine for logon script (at least, so far) but for scripts that are run later (usually through a published application but the same applies when using terminal services and a full desktop), the results are inconsistent: some users can run the script fine, some are always prompted in the powershell console for letting the scripts run. I cannot find anything that could cause this behavior and it's really inconsistent: if I start powershell manually and runs get-executionpolicy, I am told that the current policy is unrestricted. Yet, if from the same session I try to run a script through a program that calls powershell <script file name> <parameters> I get prompted before the script can run. What could cause such behavior ?

  Read the article

• How to route to a secondary interface on the same physical ethernet?

  - by sjose3612611

  INTERNET<->(wan)BRIDGED_DEVICE(lan)<->ETH_ROUTER<->LAN Problem: Need to access web server on BRIDGED_DEVICE's LAN from INTERNET via ROUTER (BRIDGED_DEVICE's web server cannot be accessed form INTERNET since it has no Public management IP). Cannot configure bridged device. It has a static IP on its LAN to which its web server binds. Attempt: Create a secondary/alias WAN Interface on ETH_ROUTER (e.g Primary: eth0.1 (for internet access) and Secondary: eth0.2 (for accessing web server on BRIDGED_DEVICE), (No VLANs). eth0.1 has a public IP; eth0.2 has a static private IP in the BRIDGED_DEVICE's subnet (e.g 10.0.X.Y). Iptables on ETH_ROUTER: Added a port forward (DNAT) from eth0.1 to eth0.2: iptables -t nat -I PREROUTING -i eth0.1 -p tcp --dport 80 -j DNAT --to-destination 10.0.X.Y iptables -t nat -I POSTROUTING -o eth0.2 -s 10.0.X.0/24 -j MASQUERADE Stateful firewall w/ overall drop policy on FORWARD chain, hence: iptables -I FORWARD -i eth0.1 -d 10.0.X.Y -p tcp --dport 80 -j ACCEPT Can ping from ETH_ROUTER to BRIDGED_DEVICE but unable to reach the web server from Internet. I see packet cont increasing for the DNAT rule but not sure where it disappears in the ETH_ROUTER after that. ETH_ROUTER is the only device that can be configured to achieve this. If familiar with this scenario, please suggest what I may be missing or doing wrong here or suggest techniques to debug?

  Read the article

• ESXi Guests will not boot on IBM x3550 M3

  - by Adrian

  I have a problem with Guests not booting under VMWare ESXi 5.0 on my IBM x3550M3 server. VM Host Server: IBM x3550 M3 7944AC1 server w/ 2x Intel Xeon E5607 2.27Ghz CPUs ESXi 5.0.0 Build 623860, built for IBM Hardware downloaded from IBM Storage: 2x500GB SAS local storage 8GB RAM Vt is verified to be ENABLED Server Health Status: Normal The ESXi host boots just fine. The Client connects just fine. Guests can be configured but do not successfully boot. The initial guest memory consumption jumps up to 560MB and drops down to 40MB after a few seconds. Initial CPU usage is 1 full CPU (3000Ghz per the chart) and immediately drops downm to 29Mhz. Guests do not display any output in the Console tab but show a state of 'Powered On'. VMs are listed as Version 7 and the behavior is duplicated across all availabled Guest OS flavors. Problem also duplicated when server is booted up in Legacy Only mode. Logs do not contain anything particularly suspucious. Edit: No firewalls, routers, or VLANs in between the client and server. Edit 2: We have tried to Boot Guest into BIOS screen at Next Boot checkbox in the Guest Setting. Was not successful. Edit 3: 500GB datastore with 1 40GB VM on it. Plenty of space.

  Read the article

• Win7 - Some pinned program's icons are corrupt, show default

  - by Andrew Backer

  I have both FF 3.6 & Chrome pinned to my taskbar in win7. The icons for these two programs show up as the ugly default icon from yesteryear. Strange. Is there some way to force an icon refresh for pinned programs? When I first added them they showed properly, but several days later they reverted to this state Un-pinning the program causes the icon to show up properly, and re-pinning it causes it to break again. These other proggies show up fine: Media Center, Media Player Classic HC, Hulu Desktop, WMP, and the folders. I have 2 user accounts on this box, and both are showing this behavior. I have tried changing the taskbar icon size to 'small' and back, but to no effect. Edit (Add) The icons show up as broken in the start menu too, but I can navigate to the EXE directly. When I click "change icon" in the properties for the start menu entry I get the error : Can not find %ProgramFiles%\Google\Chrome...\chrome.exe.

  Read the article

• Problem hosting server behing personal router

  - by Venkatesh Hodavdekar

  I recently bought the domain name lucidcontraptions.com and want to host the website from home. I have a D-Link router in which I have set up my personal virtual server correctly. My application server is Apache 2.2. The server works perfectly with the following settings: External IP: 207.172.xx.xx. Public port: 8888 Internal IP: 192.168.xx.xx. Private port: 80 If I go to 207.172.xx.xx:8888/ the server works perfectly and my Apache page shows up without any issues, both from inside the intranet as well as outside. This setting would not work out for me as I am not allowed port numbers in my DNS management. Now when I tweak the settings to the following: External IP: 207.172.xx.xx. Public port: 80 Internal IP: 192.168.xx.xx. Private port: 80 If I go to 207.172.xx.xx/ the server works perfectly and my Apache page shows up without any issues, BUT ONLY FROM INSIDE THE INTRANET. This page does not show up for people outside the intranet.

  Read the article

• Configure PEAR on CentOS 6 and PLESK

  - by RCNeil

  I'm hoping to get a little assistance with configuring PEAR to work properly. I have a PHP file that's calling PEAR's mail and mail-mime files, and I believe I am missing some steps because I keep getting the very common Warning: include_once(Mail.php): failed to open stream: No such file or directory Warning: include_once(Mail_Mime/mime.php): failed to open stream: No such file or directory It is installed - Installed packages, channel pear.php.net: ========================================= Package Version State Archive_Tar 1.3.7 stable Console_Getopt 1.2.3 stable Mail 1.2.0 stable Mail_Mime 1.8.3 stable PEAR 1.9.4 stable Structures_Graph 1.0.4 stable XML_RPC 1.5.4 stable XML_Util 1.2.1 stable And according to this TUT, I need to configure it appropriately in each vhost. I have already gone through and adjusted the php.ini file, but when the TUT speaks of the php_admin_value open_basedir "/var/www/vhosts/example.com/httpdocs:/tmp:/usr/share/pear:/local/PEAR" in my /var/www/vhosts/example.com/conf/httpd.include file I kind of get lost. There are several httpd.include files in that directory, all preceded with very long numerical strings. All I want to do is have an email attachment in my form.... Any insight or similar experiences shared would be greatly appreciated.

  Read the article

• Managing multiple Apache proxies simultaneously (mod_proxy_balancer)

  - by Hank

  The frontend of my web application is formed by currently two Apache reverse proxies, using mod_proxy_balancer to distribute traffic over a number of backend application servers. Both frontend reverse proxies, running on separate hosts, are accessible from the internet. DNS round robin distributes traffic over both. In the future, the number of reverse proxies is likely to grow, since the webapplication is very bandwidth-heavy. My question is: how do I keep the state of both reverse balancers / proxies in sync? For example, for maintenance purposes, I might want to reduce the load on one of the backend appservers. Currently I can do that by accessing the Balancer-Manager web form on each proxy, and change the distribution rules. But I have to do that on each proxy manually and make sure I enter the same stuff. Is it possible to "link" multiple instances of mod_proxy_balancer? Or is there a tool out there that connects to a number of instances, and updates all with the same information? Update: The tool should retrieve the runtime status and make runtime changes, just like the existing Balancer-Manager, only for a number of proxies - not just for one. Modification of configuration files is not what I'm interested in (as there are plenty tools for that).

  Read the article

• Running multiple sites on a LAMP with secure isolation

  - by David C.

  Hi everybody, I have been administering a few LAMP servers with 2-5 sites on each of them. These are basically owned by the same user/client so there are no security issues except from attacks through vulnerable deamons or scripts. I am builing my own server and would like to start hosting multiple sites. My first concern is... ISOLATION. How can I avoid that a c99 script could deface all the virtual hosts? Also, should I prevent that c99 to be able to write/read the other sites' directories? (It is easy to "cat" a config.php from another site and then get into the mysql database) My server is a VPS with 512M burstable to 1G. Among the free hosting managers, is there any small one which works for my VPS? (which maybe is compatible with the security approach I would like to have) Currently I am not planning to host over 10 sites but I would not accept that a client/hacker could navigate into unwanted directories or, worse, run malicious scripts. FTP management would be fine. I don't want to complicate things with SSH isolation. What is the best practice in this case? Basically, what do hosting companies do to sleep well? :) Thanks very much! David

  Read the article

• USB External HDD NOT spinning down on Windows Vista / Windows 7

  - by Deepak

  I have 3 external 2.5" USB HDDs - all from different manufacturers and with different capacities. I also have access to multiple Windows Vista / Windows 7 / Windows XP computers. My problem is that with the Windows Vista and Windows 7 computers, the external USB drives DO NOT spin down when I do "Safely remove hardware". Windows will tell me that I can safely remove the device, but I can see (and feel the rotations of the disk when I touch the casing) that the disks are still spinning and NEVER spin down. They also never go into their suspended state (which is generally signaled with a slow flashing of the activity LED). However, with Windows XP, when I do "Safely remove hardware", I can see that the drives do indeed spin down without any issues and go into their respective suspended states. I notice that this behaviour is consistent across all my 3 drives and on different hardware. Has anybody else noticed the same issues? Is there any way we can have the same behaviour as Windows XP on Windows Vista and 7, because I feel on the long run, disconnecting the drives while they are still spinning will have a negative effect on their life span. Thanks, Deepak.

  Read the article

• How do I force a server to leave a SharePoint farm

  - by Stefan

  I have two web servers in a SharePoint (WSS 3.0) farm with one database server for the config and content databases. I already moved my content databases to a new database server successfully. But when I tried to move the sharepoint config database using the "stsadm deleteconfigdb" and "stsadm setconfigdb" commands, one of my servers got stuck in an intermediate state. I was able to join one of the web servers with the config database on the new server, but the other server is not able to join because it believes it is already part of the farm (which it used to be, before the move). On the central administration it says the status of the services on the server is "stopping". Even after rebooting all servers involved, uninstalling SharePoint and what not, this status does not change, and because of it, I am not able to join the second server with the new config database. I get random error messages when trying to join the farm. I believe that if I can unstuck this server, it will be able to join the farm again. The farm believes the second server is already part of it, but the web server itself knows its not. Any ideas on how to forcefully kick out a server from the farm?

  Read the article

• High IOWait executing JBoss 3.2.7

  - by user64205

  Server Details: Kernel: Linux wiq31 2.4.21-9.ELsmp #1 SMP Thu Jan 8 17:08:56 EST 2004 i686 i686 i386 GNU/Linux CPU: 4 x Intel(R) Xeon(TM) CPU 3.06GHz Memory: 1028520 kB JBoss version: 3.2.7 Every time i try to start JBoss, in all CPU's, the iowait values starts to raise and the idle values starts to fall. Before executing my JBoss application, the free command returns the following output: *total used free shared buffers cached Mem: 1028520 966400 62120 0 187756 538928 -/+ buffers/cache: 239716 788804 Swap: 2044072 790672 1253400* After starting my JBoss application, the free command returns the following output: *total used free shared buffers cached Mem: 1028520 1007648 20872 0 187116 524084 -/+ buffers/cache: 296448 732072 Swap: 2044072 819096 1224976* After starting my JBoss application, without answering any request, the java process /proc/PID/status file have the following values: State: S (sleeping) SleepAVG: 27% Tgid: 24022 Pid: 24022 PPid: 21011 TracerPid: 0 Uid: 500 500 500 500 Gid: 500 500 500 500 FDSize: 256 Groups: 500 VmSize: 775200 kB VmLck: 0 kB VmRSS: 156752 kB VmData: 696752 kB VmStk: 36 kB VmExe: 21 kB VmLib: 710375 kB StaBrk: 0804f000 kB Brk: 095bb000 kB StaStk: bffff8c0 kB ExecLim: ffffffff Threads: 62 SigPnd: 0000000000000000 ShdPnd: 0000000000000000 SigBlk: 0000000000000000 SigIgn: 0000000000000000 SigCgt: 1000000180015ccf CapInh: 0000000000000000 CapPrm: 0000000000000000 CapEff: 0000000000000000 Is this behavior being caused by memory swapping, or the short memory available in the server is enough to run my application?

  Read the article

• Proxy Settings per Machine not working on windows server 2008 R2 SP1

  - by Anirudh Goel

  i have a very interesting problem and would appreciate any help for it. In my scenario i have scripts which bring up a VM inside a domain. Now i want to enable internet access for all the VM's and they go through a proxy. I interact with the VM's using remote sessions and use the credentials of a user which belogs to the domain administrator group. Now problem is that, i create VM's on the fly and destroy them as well,and the scripts i run during their lifetime require internet access on them.So i cannot statically set the proxy settings thus i used the option of Active Directory Group Policy Management. I initially used the "User Configuration" option and set the proxy, which worked like a charm when ever i log inside the machine. However it doesn't work if i use to remote login to the machine with an account which has not yet logged in to the machine. So i used this link to configure it to work on Per Machine, the group policy has worked fine and it reflects in the browser too. But i am not able to resolve any dns name like http://www.google.com or any internet based site. Any idea what i can do?

  Read the article

• Fresh Install of SQL Server 2008 doesn't install managment studio. Help!

  - by Jordan S

  Ok I am running Windows 7, 64 bit. I cleaned of SQL server 2005 completely off my system leaving only SQL Compact Edition. I went here http://www.microsoft.com/downloads/details.aspx?FamilyID=01af61e6-2f63-4291-bcad-fd500f6027ff&displaylang=en and installed SQL Server 2008 Express Edition Service Pack 1. After the install, under my start bar menu all i have for SQL configuration tools are the Configuration Manager, Error and Usage Reporting and the Install Center. I don't have the SQL Managment Studio. So I went here http://www.microsoft.com/downloads/details.aspx?FamilyID=08e52ac2-1d62-45f6-9a4a-4b76a8564a2b&displaylang=en and downloaded the SQL Server 2008 Management Studio Express but when I try to install it I get a warning says This program has known compatibility issues and that I need to Install SQL Server 2008 Service Pack 1. I thought that is what I installed. So, I tried to continue running the install but I then get an error message that says Invoke or BeginInvoke can not be called on a Form before it is opened... How can I check if Service pack 1 is installed or not? What should I do?

  Read the article

• Debian: Should I add vlan interface into bridge for KVM?

  - by javano

  I am setting up a Debian Squeeze box as a KVM host. I want to add multiple interfaces to each KVM guest so I want them to be on different VLANs. After reading about this, I believe the best method is to add multiple logical VLAN (sub)-interfaces to the physical NICs and then create a bridge adapter for each VLAN interace, and assign each bridge as a NIC for KVM guests. Does this make good sense, or madness? Do I have to use bridged interfaces with KVM like this? Can't I just add eth1.xx and eth1.yy to my interfaces config below and then configure those directly as bridged KVM guest NICs? If so, how should this look in the interfaces config file below? user@host:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # Management Interface auto eth0 iface eth0 inet static address 172.22.0.31 netmask 255.255.255.0 gateway 172.22.0.1 # Interface for guest VMs auto eth1 # Guest1 : Use VLAN 117 auto eth1.117 iface eth1.117 inet manual # Set up br1 for guest 1, bridging with vlan 117 auto br1.117 iface br1.117 inet manual bridge_ports eth1.117 bridge_stp off user@host:~$ uname -a Linux hostname 3.4.9 #1 SMP Wed Aug 22 19:08:46 BST 2012 x86_64 GNU/Linux UPDATE I would really like it if someone could clarify the config for me, as I have also seen the above configured with this syntax, so I don't see why one would be preferred over the other; # Interface for guest VMs auto eth1 allow-hotplug eth1 iface eth1 inet static # Vlan 117 for guest 1 auto vlan 117 iface vlan111 inet static vlan_raw_device eth1 # Guest 1 : NIC 1 auto br1.117 iface br1.117 inet manual bridge_ports vlan117 bridge_stp off

  Read the article

• Western Digitial My Book: Can't access the data on the drive

  - by Bryan Denny

  My girlfriend has this external hard drive by Western Digital called a My Book. When the external drive is connected, it does not show it as an accessible disk drive on the computer. However, it shows up fine in Device Manager: I can also see it in Disk Management, but the volume is not mapped to a drive letter, nor can I change the drive letter: It only gives me access to Delete Volume: I would rather not lose the data on the drive if possible. What can I do from here to get to the data? Things I've tried/know: Uninstall drivers and re-install them Device does the same thing when attach to either her Win7 laptop or my Win8 laptop I don't think there's an issue with the HDD itself. No clicking noises, etc. I ran Western Digital Data LifeGuard Diangostics (DLGDIAG) and the SMART Status was a "PASS", all of the SMART Disk Information looked fine. I haven't had the time to run the diag tests yet but I do not believe it's a mechanical issue. The hard drive is inside of an enclosure, I have not attempted to pry the drive out yet. How can I get Windows to properly detect this drive?

  Read the article

• Cannot access drive in Windows 7 after scandisk lockup, but can in safe mode....

  - by Matt Thompson

  I ran scandisk on my external USB drive due to the inability to delete a few files. Windows asked me if I wanted to unmount the drive before the scan, warning me that it would be unusable until the scan was finished, and I said yes. During the scan, my machine locked up, and I was forced to reboot the machine. When it came up, I was unable to access the drive, getting an error that "L:is not accessible, access is denied". Comupter Management sees the drive, and has the proper amount of disk space filled. I booted into safe mode, and can access the drive with no problems, and I noticed that in explorer, all the folders have locks on them. I booted back into windows, but still could not access the drive, getting the same error as above. Hovever, if I right click on the drive, select properties, and go to Customize, in the folder pictures ares, I select Choose File, and a window open up, that shows the root of the directory, with all the folder able to be accessed, but again, the icon is the folder icon with a lock on it. I can even copy files from the drive to another. So, the files are not gone, windows can obviously access the drive no matter what it thinks, so there has to be a problem with the flag windows put on the drive when it ran the original scan that failed. I was able to run a scan both in safe mode with no problems, and in windows. In windows, I received the cannot access error the first time I run scan disk on it, but if I try again, it works fine. Any ideas on how to clear the flag that windows set, so I can access the drive normally again?

  Read the article

• Slow boot for OS and external devices

  - by Derek Van Cuyk

  I have been having this problem intermittently but as of yesterday, it has become more consistent. It originally started when I rebooted my PC at home and the OS (Windows 8) sat in a loop appearing to do nothing while loading. I figured since this was a new installation, that something may have just become corrupted and I decided to reinstall. So I tried to boot off of the thumb drive which had the installation iso and encountered pretty much the same issue. Same with the DVD drive. So, I rebooted once again and left it to load the entire night just to see if it ever would and sure enough this morning, Windows had finally loaded. Authentication had the same roblem albeit not quite as long (took about 5 minutes to authenticate). However, once I was in, everything appeared to be working fine and as quick as normal with the exception of when I tried to scan the C drive for any errors, which ran unbearably slow (45 minutes and before I left for work and was not finished scanning a 64GB SSD drive). I mention that I have had this issue but never when loading the OS. Before it occurred when trying to install windows 7 from a different DVD drive than the one I have now. It took me about 3 hours to do it since I had to wait sometimes 30+ min for each step to finish processing. Does anyone have an idea as to what can cause this? I am assuming it is the motherboard since it is responsible for communication with all the devices I'm having issues with but I cannot find anyone else who has had a problem like this and don't want to drop more money on a MB if it isn't the problem. Hardware: Motherboard: Asus M4A78T-E Socket AM3/ AMD 790GX/ Hybrid CrossFireX Hard Drive: Kingston SSDNow V+180 64GB Micro SATA II 3GB/S 1.8 Inch Solid State Drive SVP180S2/64G Optical Drive: Samsung Blu-Ray Combo Internal 12XReadable and DVD-Writable Drive with Lightscribe SH-B123L/BSBP Thanks, Derek

  Read the article

• How to find the cause of locked user account in Windows AD domain

  - by Stephane

  After a recent incident with Outlook, I was wondering how I would most efficiently resolve the following problem: Assume a fairly typical small to medium sized AD infrastructure: several DCs, a number of internal servers and windows clients, several services using AD and LDAP for user authentication from within the DMZ (SMTP relay, VPN, Citrix, etc.) and several internal services all relying on AD for authentication (Exchange, SQL server, file and print servers, terminal services servers). You have full access to all systems but they are a bit too numerous (counting the clients) to check individually. Now assume that, for some unknown reason, one (or more) user account gets locked out due to password lockout policy every few minutes. What would be the best way to find the service/machine responsible for this ? Assuming the infrastructure is pure, standard Windows with no additional management tool and few changes from default is there any way the process of finding the cause of such lockout could be accelerated or improved ? What could be done to improve the resilient of the system against such an account lockout DOS ? Disabling account lockout is an obvious answer but then you run into the issue of users having way to easily exploitable passwords, even with complexity enforced.

  Read the article

• I have added a port to the public zone in firewalld but still can't access the port

  - by mikemaccana

  I've been using iptables for a long time, but have never used firewalld until recently. I have enabled port 3000 TCP via firewalld with the following command: # firewall-cmd --zone=public --add-port=3000/tcp --permanent However I can't access the server on port 3000. From an external box: telnet 178.62.16.244 3000 Trying 178.62.16.244... telnet: connect to address 178.62.16.244: Connection refused There are no routing issues: I have a separate rule for a port forward from port 80 to port 8000 which works fine externally. My app is definitely listening on the port too: Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:3000 0.0.0.0:* LISTEN 99 36797 18662/node firewall-cmd doesn't seem to show the port either - see how ports is empty. You can see the forward rule I mentioned earlier. # firewall-cmd --list-all public (default, active) interfaces: eth0 sources: services: dhcpv6-client ssh ports: masquerade: no forward-ports: port=80:proto=tcp:toport=8000:toaddr= icmp-blocks: rich rules: However I can see the rule in the XML config file: # cat /etc/firewalld/zones/public.xml <?xml version="1.0" encoding="utf-8"?> <zone> <short>Public</short> <description>For use in public areas. You do not trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.</description> <service name="dhcpv6-client"/> <service name="ssh"/> <port protocol="tcp" port="3000"/> <forward-port to-port="8000" protocol="tcp" port="80"/> </zone> What else do I need to do to allow access to my app on port 3000? Also: is adding access via a port the correct thing to do? Or should I make a firewalld 'service' for my app instead?

  Read the article

• Creating basic, redundant gigE or IB storage network for Xen?

  - by StaringSkyward

  With only a modest budget, I want to move my 4 xen servers over to network storage -either NFS or iSCSI which will be determined based on how well it performs when we test it (we need good throughput and it must continue to work through link and switch failure tests). We may add another couple of xen servers at some point when this is done. I don't know much about the design and operation of storage networks, so would really appreciate some hints from those with experience. The budget is around $3,800 excluding the storage appliance. I am currently thinking these are my options to remain on budget: 1) Go for used infiniband hardware and aim for 10gb performance. 2) Stick with gig ethernet and buy some new switches (cisco or procurve) to create a storage-only ethernet LAN. Upgrade to 10gigE later but try to use hardware capable of it where possible to reduce upgrade costs. I have seen used, warrantied infiniband switches at reasonable prices (presumably because big companies are converging on 10gbit ethernet?) and the promise of cheap 10gb is attractive. I know nothing about IB, so here come the questions: Can I buy 2 x switches and have multiple HBAs in my xen and storage nodes to get redundancy and increased performance without complexity or expensive management software costs? If so, can you point me to some examples? Do NFS and iSCSI work just the same regardless? Is IB a sensible choice or could/should I use ethernet or FC on the same budget - I'm keen not to get boxed into a corner for future upgrades, however. For the storage I am likely to build a storage server using nexentastor with the intention that I can later add more disks, SSDs and add another server to provide a failover option at the storage level. An HP LeftHand starter SAN is also under consideration, too. Thanks in advance.

  Read the article

< Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702  | Next Page >