third party tools - Page 695

Change the User Interface Language in Vista or Windows 7

- by Matthew Guay

Would you like to change the user interface language in any edition of Windows 7 or Vista on your computer? Here’s a free app that can help you do this quickly and easily. If your native language is not the one most spoken in your area, you’ve likely purchased a PC with Windows preinstalled with a language that is difficult or impossible for you to use. Windows 7 and Vista Ultimate include the ability to install multiple user interface languages and switch between them. However, all other editions are stuck with the language they shipped with. With the free Vistalizator app, you can add several different interface languages to any edition of Vista or Windows 7 and easily switch between them. Note: In this test, we used an US English copy of both Windows 7 Home Premium and Windows Vista Home Premium, and it works the same on any edition. The built-in language switching in the Ultimate Editions lets you set a user interface language for each user account, but this will only switch it for all users. Add a User Interface Language to Windows To add an interface language to any edition of Windows 7 and Vista, first download Vistalizator (link below). Then, from the same page, download the language pack of your choice. The language packs are specific for each service pack of Windows, so make sure to choose the correct version and service pack you have installed. Once the downloads are finished, launch the Vistalizator program. You do not need to install it; simply run it and you’re ready to go. Click the Add languages button to add a language to Windows. Select the user interface language pack you downloaded, and click Open. Depending on the language you selected, it may not automatically update with Windows Update when a service pack is released. If so, you will have to remove the language pack and reinstall the new one for that service pack at that time. Click Ok to continue. Make sure you’ve selected the correct language, and click Install language. Vistalizator will extract and install the language pack. This took around 5 to 10 minutes in our test. Once the language pack is installed, click Yes to make it the default display language. Now, you have two languages installed in Windows. You may be prompted to check for updates to the language pack; if so, click Update languages and Vistalizator will automatically check for and install any updates. When finished, exit Vistalizator to finish switching the language. Click Yes to automatically reboot and apply the changes. When you computer reboots, it will show your new language, which in our test is Thai. Here’s our Windows 7 Home Premium machine with the Thai language pack installed and running. You can even add a right to left language, such as Arabic, to Windows. Simply repeat the steps to add another language pack. Vistalizator was originally designed for Windows Vista, and works great with Windows 7 too. The language packs for Vista are larger downloads than their Windows 7 counterparts. Here’s our Vista Home Premium in English… And here’s how it looks after installing the Simplified Chinese language pack with Vistalizator. Revert to Your Original Language If you wish to return to the language that your computer shipped with, or want to switch to another language you’ve installed, run Vistalizator again. Select the language you wish to use, and click Change language. When you close Vistalizator, you will again be asked to reboot. Once you’ve rebooted, you’ll see your new (or original) language ready to use. Here’s our Windows 7 Home Premium desktop, back in it’s original English interface. Conclusion This is a great way to change your computer’s language into your own native language, and is especially useful for expatriates around the world. Also, if you’d like to simply change or add an input language instead of changing the language throughout your computer, check out our tutorial on How to Add Keyboard Languages to XP, Vista, and Windows 7. Download Vistalizator Similar Articles Productive Geek Tips Enable Military Time in Windows 7 or VistaWhy Does My Password Expire in Windows?Use Windows Vista Aero through Remote Desktop ConnectionDisable User Account Control (UAC) the Easy Way on Win 7 or VistaAdd keyboard languages to XP, Vista, and Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

Read the article

On checking is a port open on the firewall?

- by [email protected]

Hi, well sometimes DBAs and sysadmin need to check if a particular port is "open" on the corporate firewall --i.e. *Grid Control* Will the communication between OMS and a management agent work? --One solution well consist on deploying the piece of software in question, start it and just check if everything works fine, however i find more classy trying to get that information beforeThere are several tools for doing so --i.e. nmap *like Trinity on The Matrix*, but just found a nice piece of code for establishing a socket on a parameter passed port.After running the program doing a telnet from the client machine will be a walk in the park Normal 0 21 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> int main(int argc, char *argv[]) { int sockfd, newsockfd, portno, clilen; char buffer[256]; struct sockaddr_in serv_addr, cli_addr; int n; if (argc < 2) { fprintf(stderr,"ERROR: A port must be provided. Aborting ...\n"); return 1; } sockfd = socket(AF_INET, SOCK_STREAM, 0); if (sockfd < 0) { fprintf("ERROR: Unable to open socket. Aborting ...\n"); return 1; } portno = atoi(argv[1]); serv_addr.sin_family = AF_INET; serv_addr.sin_addr.s_addr = INADDR_ANY; serv_addr.sin_port = htons(portno); if (bind(sockfd, (struct sockaddr *) &serv_addr,sizeof(serv_addr)) < 0) { fprintf("ERROR: Unable to bind socket. Aborting ...\n"); return 1; } listen(sockfd,5); clilen = sizeof(cli_addr); newsockfd = accept(sockfd, (struct sockaddr *) &cli_addr,&clilen); if (newsockfd < 0) { fprintf("ERROR: Unable to accept connection. Aborting...\n"); return 1; } return 0; }Of course, you can still ask to the network guy if the port is open or notHope it helpsL

Read the article

Learn About Oracle’s Strategy for a Simple, Modern User Experience at OpenWorld 2012

- by Applications User Experience

By Kathy Miedema, Oracle Applications User Experience If you’re interested in what the best possible user experience looks like, you’ll want to hear what Oracle’s Applications User Experience team is planning for OpenWorld 2012, Sept. 30-Oct. 4 in San Francisco. This year, we will talk Fusion, Fusion, Fusion. We were among the first to show Oracle Fusion Applications in the last couple of years, and we’ll be showing it again this year so you can see what Oracle is planning for the next generation of enterprise applications. Attend our sessions to learn more about the user experience strategy in which Oracle is investing. Simplicity is the driving force behind the demos that we are unveiling now, which you can see at OpenWorld. We want to create opportunities for productivity and efficiency, and deliver enterprise data across devices to help you do your work in the way best suited to your job and needs, said Jeremy Ashley, Vice President, Oracle Applications User Experience. You can see the new look for Fusion Applications at a general session led by Ashley at 3:30 p.m. on Wednesday, Oct. 3. You’ll also have the chance to learn more about tailoring in Oracle Fusion Applications, and gain a new understanding of the investment in the user experience behind Fusion Applications at our sessions (see session information below). Inside the Oracle Applications User Experience team’s on-site lab at Oracle OpenWorld 2011. Head to the demogrounds to see new demos from the Applications User Experience team, including the new look for Fusion Applications and what we’re building for mobile platforms. Take a spin on our eye tracker, a very cool tool that we use to research the usability of a particular design. Visit the Usable Apps OpenWorld page to find out where our demopods will be located. We are also recruiting participants for our on-site lab, in which we gather feedback on new user experience designs, and taking reservations for a charter bus that will bring you to Oracle headquarters for a lab tour Thursday, Oct. 4, or Friday, Oct. 5. Tours leave at 10 a.m. and 1:45 p.m. from the Moscone Center in San Francisco. You’ll see more of our newest designs at the lab tour, and some of our research tools in action. Can’t participate in a customer feedback session or take a lab tour this time around? Visit Usable Apps to participate or book a tour another time. For more information on any OpenWorld sessions, check the content catalog – also available at www.oracle.com/openworld. For information on Applications User Experience (Apps UX) sessions and activities, go to the Usable Apps OpenWorld page. APPS UX OPENWORLD SESSIONS Oracle’s Roadmap to a Simple, Modern User Experience Presenter: Jeremy Ashley, Vice President Applications User Experience, Oracle; with Debra Lilley, Fujitsu Consulting; Basheer Khan, Innowave; and Edward Roske, InterRelSession ID: CON9467Date: Wednesday, Oct. 3 Time: 3:30 - 4:30 p.m.Location: Moscone West - 3002/3004 Jeremy Ashley Oracle Fusion Applications: Transforming Insight into Action Presenters: Killian Evers and Kristin Desmond, OracleSession ID: CON8718Date: Thursday, Oct. 4Time: 11:15 a.m. - 12:15 p.m.Location: Moscone West - 2008 “FRIENDS OF UX” OPENWORLD SESSIONS Sessions by the Oracle Usability Advisory Board (OUAB) members: Advances in Oracle Enterprise Governance, Risk, and Compliance Manager Presenters: Koen Delaure, KPMG Advisory NV, and Oracle Usability Advisory Board member; Russell Stohr, Oracle Session ID: CON9389Date: Tuesday, Oct. 2Time: 1:15 - 2:15 p.m.Location: Palace Hotel - Concert Optimize Oracle E-Busines Suite Procure-to-Pay: Cut Inefficiences/Fraud with Oracle GRC Apps Presenters: Koen Delaure, KPMG Advisory NV, and Solveig Wagner, Seadrill Management AS, both Oracle Usability Advisory Board members; and Swarnali Bag, OracleSession ID: CON9401Date: Monday, Oct. 1Time: 12:15 - 1:15 p.m.Location: Intercontinental - Sutter Showcase of JD Edwards EnterpriseOne Mobility Presenters: Jon Wells, Westmoreland Coal Co., Oracle Usability Advisory Board member; Rob Mills and Liz Davson, Town of Oakville; Keith Sholes and Louise Farner, Oracle Session ID: CON9123Date: Tuesday, Oct. 2Time: 1:15 - 2:15 p.m.Location: InterContinental - Grand Ballroom B Sessions by the Fusion User Experience Adovcates (FXA) Usability and Features of Oracle Fusion Applications, Built upon Oracle Fusion Middleware Presenters: Debra Lilley, Fujitsu Consulting and Oracle Usability Advisory Board member; John King, King Training ResourcesSession ID: UGF10371Date: Sunday, Sept. 30Time: 11 a.m. - 11:45 a.m. Location: Moscone West – 2010 Ten Things to Love About Oracle Fusion Project Portfolio Management Presenter: Floyd Teter, EiS TechnologiesSession ID: CON6021Date: Tuesday, Oct. 2Time: 10:15 - 11:15 a.m.Location: Moscone West – 2003

Read the article

ASP.NET Web API - Screencast series Part 3: Delete and Update

- by Jon Galloway

We're continuing a six part series on ASP.NET Web API that accompanies the getting started screencast series. This is an introductory screencast series that walks through from File / New Project to some more advanced scenarios like Custom Validation and Authorization. The screencast videos are all short (3-5 minutes) and the sample code for the series is both available for download and browsable online. I did the screencasts, but the samples were written by the ASP.NET Web API team. In Part 1 we looked at what ASP.NET Web API is, why you'd care, did the File / New Project thing, and did some basic HTTP testing using browser F12 developer tools. In Part 2 we started to build up a sample that returns data from a repository in JSON format via GET methods. In Part 3, we'll start to modify data on the server using DELETE and POST methods. So far we've been looking at GET requests, and the difference between standard browsing in a web browser and navigating an HTTP API isn't quite as clear. Delete is where the difference becomes more obvious. With a "traditional" web page, to delete something'd probably have a form that POSTs a request back to a controller that needs to know that it's really supposed to be deleting something even though POST was really designed to create things, so it does the work and then returns some HTML back to the client that says whether or not the delete succeeded. There's a good amount of plumbing involved in communicating between client and server. That gets a lot easier when we just work with the standard HTTP DELETE verb. Here's how the server side code works: public Comment DeleteComment(int id) { Comment comment; if (!repository.TryGet(id, out comment)) throw new HttpResponseException(HttpStatusCode.NotFound); repository.Delete(id); return comment; } If you look back at the GET /api/comments code in Part 2, you'll see that they start the exact same because the use cases are kind of similar - we're looking up an item by id and either displaying it or deleting it. So the only difference is that this method deletes the comment once it finds it. We don't need to do anything special to handle cases where the id isn't found, as the same HTTP 404 handling works fine here, too. Pretty much all "traditional" browsing uses just two HTTP verbs: GET and POST, so you might not be all that used to DELETE requests and think they're hard. Not so! Here's the jQuery method that calls the /api/comments with the DELETE verb: $(function() { $("a.delete").live('click', function () { var id = $(this).data('comment-id'); $.ajax({ url: "/api/comments/" + id, type: 'DELETE', cache: false, statusCode: { 200: function(data) { viewModel.comments.remove( function(comment) { return comment.ID == data.ID; } ); } } }); return false; }); }); So in order to use the DELETE verb instead of GET, we're just using $.ajax() and setting the type to DELETE. Not hard. But what's that statusCode business? Well, an HTTP status code of 200 is an OK response. Unless our Web API method sets another status (such as by throwing the Not Found exception we saw earlier), the default response status code is HTTP 200 - OK. That makes the jQuery code pretty simple - it calls the Delete action, and if it gets back an HTTP 200, the server-side delete was successful so the comment can be deleted. Adding a new comment uses the POST verb. It starts out looking like an MVC controller action, using model binding to get the new comment from JSON data into a c# model object to add to repository, but there are some interesting differences. public HttpResponseMessage<Comment> PostComment(Comment comment) { comment = repository.Add(comment); var response = new HttpResponseMessage<Comment>(comment, HttpStatusCode.Created); response.Headers.Location = new Uri(Request.RequestUri, "/api/comments/" + comment.ID.ToString()); return response; } First off, the POST method is returning an HttpResponseMessage<Comment>. In the GET methods earlier, we were just returning a JSON payload with an HTTP 200 OK, so we could just return the model object and Web API would wrap it up in an HttpResponseMessage with that HTTP 200 for us (much as ASP.NET MVC controller actions can return strings, and they'll be automatically wrapped in a ContentResult). When we're creating a new comment, though, we want to follow standard REST practices and return the URL that points to the newly created comment in the Location header, and we can do that by explicitly creating that HttpResposeMessage and then setting the header information. And here's a key point - by using HTTP standard status codes and headers, our response payload doesn't need to explain any context - the client can see from the status code that the POST succeeded, the location header tells it where to get it, and all it needs in the JSON payload is the actual content. Note: This is a simplified sample. Among other things, you'll need to consider security and authorization in your Web API's, and especially in methods that allow creating or deleting data. We'll look at authorization in Part 6. As for security, you'll want to consider things like mass assignment if binding directly to model objects, etc. In Part 4, we'll extend on our simple querying methods form Part 2, adding in support for paging and querying.

Read the article

PASS Summit 2010 Recap

- by AjarnMark

Last week I attended my eighth PASS Summit in nine years, and every year it is a fantastic event! I was fortunate my first year to have a contact (Bill Graziano (blog | Twitter) from SQLTeam) that I was expecting to meet, and who got me started on a good track of making new contacts. Each year I have made a few more, and renewed friendships from years past. Many of the attendees agree that the pure networking opportunities are one of the best benefits of attending the Summit. And there’s a lot of great technical stuff, too, some of the things that stick out for me this year include… Pre-Con Monday: PowerShell with Allen White (blog | Twitter). This was the first time that I attended a pre-con. For those not familiar with the concept, the regular sessions for the conference are 75-90 minutes long. For an extra fee, you can attend a full-day session on a single topic during a pre- or post-conference training day. I had been meaning for several months to dive in and learn PowerShell, but just never seemed to find (or make) the time for it, so when I saw this was one of the all-day sessions, and I was planning to be there on Monday anyway, I decided to go for it. And it was well worth it! I definitely came out of there with a good foundation to build my own PowerShell scripts, plus several sample scripts that he showed which already cover the first four or five things I was planning to do with PowerShell anyway. This looks like the right tool for me to build an automated version of our software deployment process, which right now contains many repeated steps. Thanks Allen! Service Broker with Denny Cherry (blog | Twitter). I remembered reading Denny’s blog post on Using Service Broker instead of Replication, and ever since then I have been thinking about using this to populate a new reporting-focused Data Repository that we will be building in the near future. When I saw he was doing this session, I thought it would be great to get more information and be able to ask the author questions. When I brought this idea back to my boss, he really liked it, as we had previously been discussing doing nightly data loads, with an option to manually trigger a mid-day load if up-to-the-minute data was needed for something. If we go the Service Broker route, we can keep the Repository current in near real-time. Hooray! DBA Mythbusters with Paul Randal (blog | Twitter). Even though I read every one of the posts in Paul’s blog series of the same name, I had to go see the legend in person. It was great, and I still learned something new! How to Conduct Effective Meetings with Joe Webb (blog | Twitter). I always like to sit in on a session that Joe does. I met Joe several years ago when both he and Bill Graziano were on the PASS Board of Directors together, and we have kept in touch. Joe is very well-spoken and has great experience with both SQL Server and business. And we could certainly use some pointers at my work (probably yours, too) on making our meetings more effective and to run on-time. Of course, now that I’m the Chapter Leader for the Professional Development virtual chapter, I also had to sit in on this ProfDev session and recruit Joe to do a presentation or two for the chapter next year. Query Optimization with David DeWitt. Anyone who has seen Dr. David DeWitt present the 3rd keynote at a PASS Summit over the last three years knows what a great time it is to sit and listen to him make some really complicated and advanced topic easy to understand (although it still makes your head hurt). It still amazes me that the simple two-table join query from pubs that he used in his example can possibly have 22 million possible physical query plans. Ouch! Exhibit Hall: This year I spent more serious time in the exhibit hall than any year past. I have talked my boss into making a significant (for us) investment in monitoring tools next year, and this was a great opportunity to talk with all the big-hitters. Readers of mine may recall that I fell in love with the SQL Sentry Power Suite several months ago and wrote a blog entry about it just from the trial version. Well as things turned out, short-term budget priorities shifted, and we weren’t able to make the purchase then. I have it in the budget for next year, but since I was going to the Summit, my boss wanted me to look at the other options to see if this was really the one that we wanted. I spent a couple of hours talking with representatives from Red-Gate, Idera, Confio, and Quest about their offerings, and giving them each the same 3 scenarios that I wanted to be able to accomplish based on the questions and issues that arise in our company. It was interesting to discover the different approaches or “world view” that each vendor takes to the subject of performance monitoring and troubleshooting. I may write a separate article that goes into this in more depth, but the product that best aligned with our point of view, and met the current needs we have is still the SQL Sentry Power Suite. I’m not saying that the others are bad or wrong or anything like that, just that the way they tackled the issue did not align as well with our particular needs as does SQL Sentry’s product. And that was something I learned too, when you go shopping for these products, you really need to know what you want to get from them. It’s best if you have a few example scenarios from work that you can use to test out how well each tool fits your particular needs. Overall, another GREAT event. I can’t wait to get the DVDs so I can sit in on a bunch of other sessions that I couldn’t get to because I was in one of the ones above. And I can hardly wait until next year!

Read the article

Whitepaper list for the application framework

- by Rick Finley

We're reposting the list of technical whitepapers for the Oracle ETPM framework (called OUAF, Oracle Utilities Application Framework). These are are available from My Oracle Support at the Doc Id's mentioned below. Some have been updated in the last few months to reflect new advice and new features. This is reposted from the OUAF blog: http://blogs.oracle.com/theshortenspot/entry/whitepaper_list_as_at_november Doc Id Document Title Contents 559880.1 ConfigLab Design Guidelines This whitepaper outlines how to design and implement a data management solution using the ConfigLab facility. This whitepaper currently only applies to the following products: Oracle Utilities Customer Care And Billing Oracle Enterprise Taxation Management Oracle Enterprise Taxation and Policy Management 560367.1 Technical Best Practices for Oracle Utilities Application Framework Based Products Whitepaper summarizing common technical best practices used by partners, implementation teams and customers. 560382.1 Performance Troubleshooting Guideline Series A set of whitepapers on tracking performance at each tier in the framework. The individual whitepapers are as follows: Concepts - General Concepts and Performance Troublehooting processes Client Troubleshooting - General troubleshooting of the browser client with common issues and resolutions. Network Troubleshooting - General troubleshooting of the network with common issues and resolutions. Web Application Server Troubleshooting - General troubleshooting of the Web Application Server with common issues and resolutions. Server Troubleshooting - General troubleshooting of the Operating system with common issues and resolutions. Database Troubleshooting - General troubleshooting of the database with common issues and resolutions. Batch Troubleshooting - General troubleshooting of the background processing component of the product with common issues and resolutions. 560401.1 Software Configuration Management Series A set of whitepapers on how to manage customization (code and data) using the tools provided with the framework. The individual whitepapers are as follows: Concepts - General concepts and introduction. Environment Management - Principles and techniques for creating and managing environments. Version Management - Integration of Version control and version management of configuration items. Release Management - Packaging configuration items into a release. Distribution - Distribution and installation of releases across environments Change Management - Generic change management processes for product implementations. Status Accounting - Status reporting techniques using product facilities. Defect Management - Generic defect management processes for product implementations. Implementing Single Fixes - Discussion on the single fix architecture and how to use it in an implementation. Implementing Service Packs - Discussion on the service packs and how to use them in an implementation. Implementing Upgrades - Discussion on the the upgrade process and common techniques for minimizing the impact of upgrades. 773473.1 Oracle Utilities Application Framework Security Overview A whitepaper summarizing the security facilities in the framework. Now includes references to other Oracle security products supported. 774783.1 LDAP Integration for Oracle Utilities Application Framework based products Updated! A generic whitepaper summarizing how to integrate an external LDAP based security repository with the framework. 789060.1 Oracle Utilities Application Framework Integration Overview A whitepaper summarizing all the various common integration techniques used with the product (with case studies). 799912.1 Single Sign On Integration for Oracle Utilities Application Framework based products A whitepaper outlining a generic process for integrating an SSO product with the framework. 807068.1 Oracle Utilities Application Framework Architecture Guidelines This whitepaper outlines the different variations of architecture that can be considered. Each variation will include advice on configuration and other considerations. 836362.1 Batch Best Practices for Oracle Utilities Application Framework based products This whitepaper outlines the common and best practices implemented by sites all over the world. 856854.1 Technical Best Practices V1 Addendum Addendum to Technical Best Practices for Oracle Utilities Customer Care And Billing V1.x only. 942074.1 XAI Best Practices This whitepaper outlines the common integration tasks and best practices for the Web Services Integration provided by the Oracle Utilities Application Framework. 970785.1 Oracle Identity Manager Integration Overview This whitepaper outlines the principals of the prebuilt intergration between Oracle Utilities Application Framework Based Products and Oracle Identity Manager used to provision user and user group security information. For Fw4.x customers use whitepaper 1375600.1 instead. 1068958.1 Production Environment Configuration Guidelines A whitepaper outlining common production level settings for the products based upon benchmarks and customer feedback. 1177265.1 What's New In Oracle Utilities Application Framework V4? Whitepaper outlining the major changes to the framework since Oracle Utilities Application Framework V2.2. 1290700.1 Database Vault Integration Whitepaper outlining the Database Vault Integration solution provided with Oracle Utilities Application Framework V4.1.0 and above. 1299732.1 BI Publisher Guidelines for Oracle Utilities Application Framework Whitepaper outlining the interface between BI Publisher and the Oracle Utilities Application Framework 1308161.1 Oracle SOA Suite Integration with Oracle Utilities Application Framework based products This whitepaper outlines common design patterns and guidelines for using Oracle SOA Suite with Oracle Utilities Application Framework based products. 1308165.1 MPL Best Practices Oracle Utilities Application Framework This is a guidelines whitepaper for products shipping with the Multi-Purpose Listener. This whitepaper currently only applies to the following products: Oracle Utilities Customer Care And Billing Oracle Enterprise Taxation Management Oracle Enterprise Taxation and Policy Management 1308181.1 Oracle WebLogic JMS Integration with the Oracle Utilities Application Framework This whitepaper covers the native integration between Oracle WebLogic JMS with Oracle Utilities Application Framework using the new Message Driven Bean functionality and real time JMS adapters. 1334558.1 Oracle WebLogic Clustering for Oracle Utilities Application Framework New! This whitepaper covers process for implementing clustering using Oracle WebLogic for Oracle Utilities Application Framework based products. 1359369.1 IBM WebSphere Clustering for Oracle Utilities Application Framework New! This whitepaper covers process for implementing clustering using IBM WebSphere for Oracle Utilities Application Framework based products 1375600.1 Oracle Identity Management Suite Integration with the Oracle Utilities Application Framework New! This whitepaper covers the integration between Oracle Utilities Application Framework and Oracle Identity Management Suite components such as Oracle Identity Manager, Oracle Access Manager, Oracle Adaptive Access Manager, Oracle Internet Directory and Oracle Virtual Directory. 1375615.1 Advanced Security for the Oracle Utilities Application Framework New! This whitepaper covers common security requirements and how to meet those requirements using Oracle Utilities Application Framework native security facilities, security provided with the J2EE Web Application and/or facilities available in Oracle Identity Management Suite.

Read the article

Trying to run my code and compiler seems to just close after it executes [migrated]

- by Shane

I am trying to run a program and the compiler seems to just crash right after it executes ... i have no build errors so i am wondering what the hell is going on ... I am a bit of a novice so all help would be appreciated =). I don't know if you might have time to scan through the code but this is what i have got : using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading.Tasks; namespace ConsoleApplication1 { public class Student { string Fname, Lname, Program ; int Sid ; // Inputting information for students public void InputStudentInfo () { Console.WriteLine ("Please enter your first name") ; Fname = Console.ReadLine() ; Console.WriteLine ("Please enter you last name") ; Lname = Console.ReadLine() ; Console.WriteLine ("Please enter you student ID#") ; Sid = int.Parse(Console.ReadLine()) ; Console.WriteLine ("Enter the Program that you are completeing") ; Program = Console.ReadLine() ; } // Printing information for students public void PrintStudentInfo () { Console.Write (" Your name is " + Fname) ; Console.Write(" " + Lname); Console.WriteLine (" Your student identification number is " + Sid) ; Console.WriteLine (" The program you are registered for is " + Program) ; } /* public void MenuInterface() { Console.WriteLine (" 1. Input Student information" ) ; Console.WriteLine (" 2. Input Course information" ) ; Console.WriteLine (" 3. Input Grade information" ) ; Console.WriteLine (" 4. Print Course information" ) ; Console.WriteLine (" 5. Print Student information" ) ; Console.WriteLine (" 6. Print Grade information" ) ; Console.WriteLine (" 7. Print Student information including Course they are registered in and the grade obtained for that course" ) ; Console.WriteLine (" 8. Print grade info of the course in which student has achieved the highest grade" ) ; Console.WriteLine (" 0. Exit") ; Console.WriteLine (" Please select a choice from 0-8") ; accode = Console.ReadLine(); } */ } public class Course { string course1, course2, course3 ; int Stuid ; // Inputting Course Information public void InputCourseInfo () { Console.WriteLine (" Please re-enter your identification number") ; Stuid = int.Parse(Console.ReadLine()) ; Console.WriteLine (" Enter the name of your first course") ; course1 = Console.ReadLine() ; Console.WriteLine (" Enter the name of your second course") ; course2 = Console.ReadLine() ; Console.WriteLine (" Enter the name of your third course") ; course3 = Console.ReadLine() ; } // Printing Course Information public void PrintCourseInfo () { Console.WriteLine (" Your ID # is " + Stuid) ; Console.Write (" The Courses you selected are " + course1) ; Console.Write("," + course2); Console.Write(" and " + course3); } } public class Grade : Course { int Studentid ; int [] hwgrade ; int [] cwgrade ; int [] midegrade ; int [] finalegrade ; int [] totalgrade ; string coursename ; public Grade ( string cname , int Studentident , int [] homework , int [] classwork , int [] midexam , int [] finalexam) { coursename = cname ; Studentid = Studentident ; hwgrade = homework ; cwgrade = classwork ; midegrade = midexam ; finalegrade = finalexam ; } public string coname { get { return coursename ; } set { coursename = value ; } } public int Studentidenty { get { return Studentid ; } set { Studentid = value ; } } public void InputGradeInfo() { Console.WriteLine (" Please enter your Student ID" ) ; grade.Studentidenty = Console.ReadLine() ; for ( int i = 0; i < 3; i++) { Console.Writeline (" Please enter the Course name" ) ; grade.coname[i] = Console.Readline() ; Console.Writeline (" Please enter your homework grade") ; grade.hwgrade[i] = int.parse(Console.Readline()) ; // ..... } } public void CalcTotalGrade() { for (int i = 0; i < 3; i++) { grade.courseper[i] = (grade.hwgrade[i] + grade.cwgrade[i]) / 2; grade.finalper[i] = (grade.midexam[i] + grade.finalegrade[i]) / 2; grade.totalgrade[i] = (grade.courseper[i] + finalper[i]) / 2; } } public void PrintGradeInfo() { for ( int i = 0; i < 3; i++) { Console.Writeline (" Your homework grade is" + grade.hwgrade[i]) ; // ..... } } static void Main(string[] args) { int accode ; Student student = new Student() ; Course course = new Course() ; Grade grade = new Grade() ; do { Console.WriteLine(" 1. Input Student information"); Console.WriteLine(" 2. Input Course information"); Console.WriteLine(" 3. Input Grade information"); Console.WriteLine(" 4. Print Course information"); Console.WriteLine(" 5. Print Student information"); Console.WriteLine(" 6. Print Grade information"); Console.WriteLine(" 7. Print Student information including Course they are registered in and the grade obtained for that course"); Console.WriteLine(" 8. Print grade info of the course in which student has achieved the highest grade"); Console.WriteLine(" 0. Exit"); Console.WriteLine(" Please select a choice from 0-8"); accode = Console.ReadLine(); switch (accode) { case 1: student.InputStudentInfo(); break; case 2: course.InputCourseInfo(); break; case 3: grade.InputGradeInfo(); break; case 4: course.PrintCourseInfo(); break; case 5: student.PRintStudentInfo(); break; case 6: grade.PrintGradeInfo(); break; case 0: Console.WriteLine(" You have chosen to exit the program have a good day. =)"); break; } } while (accode != 0); Console.ReadKey(); } } }

Read the article

Microsoft TechEd 2010 - Day 3 @ Bangalore

- by sathya

Microsoft TechEd 2010 - Day 3 @ Bangalore Sorry for my delayed post on day 3 because I had to travel from Blore to Chennai So I couldnt write for the past two days. On day 3 as usual we had lot of simultaneous tracks on various sessions. This day I choose the Your Data, Our Platform Track. It had sessions on the following 5 topics : Developing Data-tier Applications in Visual Studio 2010 - by Sanjay Nagamangalam SQL Server Query Optimization, Execution and Debugging Query Performance - by Vinod Kumar M SQL Server Utility - Its about more than 1 SQL Server - by Vinod Kumar Jagannathan Data Recovery / Consistency with CheckDB - by Vinod Kumar M Developing with SQL Server Spatial and Deep dive into Spatial Indexing - by Pinal Dave Developing Data-tier Applications in Visual Studio 2010 - by Sanjay Nagamangalam This was one of the superb sessions i have attended. He explained all the concepts in detail with a demo. The important thing in this is there is something called Data-Tier application project which is newly introduced in this VS2010 with which we can manage all our data along with our application inside our VS itself. We can create DB,Tables,Procs,Views etc. here itself and once we deploy it creates a compressed file called .dacpac which stores all the changes in Table Schema,Created procs, etc. on to that single file which reduces our (developer's) effort in preparing the deployment scripts and giving it to the DBA. It also has some policy configurations which can be managed easily by checking some rules like in outlook. For Ex : IF the SQL Server Version > 10 then deploy else dont. This rule specifies that even if we try to deploy on SQL Server DB with version less than 10 It will not do it. And if we deploy some .dacpac to SQL server production db with the option upgrade DB with this dacpac once everything completes successfully it will say success else it rollsback to the prior version. Even if it gets deployed successfully and later @ a point of time you wish to revert it back to the prior version, you can go ahead and delete the existing dacpac version so that it reverts to the older version of the db changes. And for the good questions that were asked in the session T-Shirts were given. SQL Server Query Optimization, Execution and Debugging Query Performance - by Vinod Kumar M This one too was the best session. The speaker Vinod explained everything very much clearly. This was really useful session and you dont believe, as per my knowledge, in the total 3 days in the TechEd except the Keynote, for this session seats were full (House FULL) People were even standing out to attend this session. Such a great one it was. The speaker did a deep dive in to the Query Plan section and showed which actually causes the problem. Its all about the thing that we need to understand about the execution of SQL server Queries. We think in a way and SQL Server never executes in that way. We need to understand that first. He also told about there might be two plans generated for a single query at a point of time because of parallel processors in the system. The Key is here in every query. There is something called Estimated Row Count and Actual Row Count in the query plan. If the estimated row count by SQL server tallies with the actual row count your performance will be awesome. He said some tweaks to achieve the same. After this as usual we had lunch SQL Server Utility - Its about more than 1 SQL Server - by Vinod Kumar Jagannathan This was more of a DBA's session. Am really sorry I was totally blank and I was not interested to attend this session and walked out to attend Migrating to the cloud by Harish Ranganathan (My favorite Speaker) but unfortunately that was some other persons session. There the speaker was telling about how to configure the connection strings in such a way that we can connect to the SQL Azure platform from our VS and also showed us how to deploy the same in to Windows Azure. In between there were lot of technical problems like laptop hang, user locked and he was switching between systems, also i came in the half so i wasnt able to listen that fully. In between, Since I got an MCTS certification they gave me T-Shirt with the lines 'Iam Certified. Are you?' and they asked me to wear that. If we wear that we might get spotted and they would give us some goodies So on the 3rd day I was wearing that T-Shirt. I got spotted by the person Tarun who was coordinating things about the certification, and he was accompanied with a cameraman and they interviewed me about the certification and I was shown live in the Teched and was seen by 60000 live viewers of the TechEd. I was really happy on that. Data Recovery / Consistency with CheckDB - by Vinod Kumar M This was one of the best sessions too in the TechEd. This guy is really amazing. In front of us he crashed a DB and showed how to recover the same in 6 different ways for different no of failures. Showed about Different types of error msgs like : 823,824,825 msdb..suspect_pages DBCC CheckDB (different parameters to it) I am really waiting for his session to get uploaded live in the Teched Website. Here is his contact info If you wish to connect to him : Twitter : @vinodk_sql Website : www.ExtremeExperts.com Blog : http://blogs.sqlxml.org/vinodkumar Developing with SQL Server Spatial and Deep dive into Spatial Indexing - by Pinal Dave Pinal Dave is a King in SQL and he is a SQL MVP and he is the owner of SQLAuthority.com He took the session on Spatial Databases from the start. Showed about the different types of Spatial : Geometric and Geographic Geometric : x and y axis its a planar surface Geographic : Spherical surface with 3600 as the maximum which is used to represent the geographic points on the earth and easy to draw maps of different kinds. He had a lot of obstacles during his session like rain coming inside the hall, mic wires got bursted due to rain, Videos off on the display screens. In spite of that he asked the audience to come in the front rows and managed to take a good session without ppts and finally we got the displays on and he was showing demos on the same what he explained orally. That was really a fun filled informative session. He gave some books for the persons who asked good questions and answered well for his questions and I got one too (It was a book on Data Mining - Wrox Publishers) And finally after all these things there was Keynote session for close of the TechEd. and we all assembled in a big hall where Mr.Ashok Soota, a man of age around 70 co-founder of Mindtree was called to give some lecture on his successes. He was explaining about his past and what all companies he switched and for what reasons and what are all his successes and what are all his failures and the learnings of him from his past failures. and his success and failures on his partnerships with the other concern. And there were some questions for him like What is your suggestion on young entrepreneur? How did you learn from past failures? What is reiterating your success? What is your suggestion on partnerships? How to choose partnerships? etc. And they said @ 7.30 Pm there would be a party night, but unfortunately i was not able to attend that because I had to catch my train and before that i had to pack things, so I started @ 7 itself. Thats it about the TechED!!! Stay tuned for further Technology updates.

Read the article

Formal Languages, Inductive Proofs & Regular Expressions

- by MarkPearl

So I am slogging away at my UNISA stuff. I have just finished doing the initial once non stop read through the first 11 chapters of my COS 201 Textbook - “Introduction to Computer Theory 2nd Edition” by Daniel Cohen. It has been an interesting couple of days, with familiar concepts coming up as well as some new territory. In this posting I am going to cover the first couple of chapters of the book. Let start with Formal Languages… What exactly is a formal language? Pretty much a no duh question for me but still a good one to ask – a formal language is a language that is defined in a precise mathematical way. Does that mean that the English language is a formal language? I would say no – and my main motivation for this is that one can have an English sentence that is correct grammatically that is also ambiguous. For example the ambiguous sentence: "I once shot an elephant in my pyjamas.” For this and possibly many other reasons that I am unaware of, English is termed a “Natural Language”. So why the importance of formal languages in computer science? Again a no duh question in my mind… If we want computers to be effective and useful tools then we need them to be able to evaluate a series of commands in some form of language that when interpreted by the device no confusion will exist as to what we were requesting. Imagine the mayhem that would exist if a computer misinterpreted a command to print a document and instead decided to delete it. So what is a Formal Language made up of… For my study purposes a language is made up of a finite alphabet. For a formal language to exist there needs to be a specification on the language that will describe whether a string of characters has membership in the language or not. There are two basic ways to do this: By a “machine” that will recognize strings of the language (e.g. Finite Automata). By a rule that describes how strings of a language can be formed (e.g. Regular Expressions). When we use the phrase “string of characters”, we can also be referring to a “word”. What is an Inductive Proof? So I am not to far into my textbook and of course it starts referring to proofs and different types. I have had to go through several different approaches of proofs in the past, but I can never remember their formal names , so when I saw “inductive proof” I thought to myself – what the heck is that? Google to the rescue… An inductive proof is like a normal proof but it employs a neat trick which allows you to prove a statement about an arbitrary number n by first proving it is true when n is 1 and then assuming it is true for n=k and showing it is true for n=k+1. The idea is that if you want to show that someone can climb to the nth floor of a fire escape, you need only show that you can climb the ladder up to the fire escape (n=1) and then show that you know how to climb the stairs from any level of the fire escape (n=k) to the next level (n=k+1). Does this sound like a form of recursion? No surprise then that in the same chapter they deal with recursive definitions. An example of a recursive definition for the language EVEN would the 3 rules below: 2 is in EVEN If x is in EVEN then so is x+2 The only elements in the set EVEN are those that be produced by the rules above. Nothing to exciting… So if a definition for a language is done recursively, then it makes sense that the language can be proved using induction. Regular Expressions So I am wondering to myself what use is this all – in fact – I find this the biggest challenge to any university material is that it is quite hard to find the immediate practical applications of some theory in real life stuff. How great was my joy when I suddenly saw the word regular expression being introduced. I had been introduced to regular expressions on Stack Overflow where I was trying to recognize if some text measurement put in by a user was in a valid form or not. For instance, the imperial system of measurement where you have feet and inches can be represented in so many different ways. I had eventually turned to regular expressions as an easy way to check if my parser could correctly parse the text or not and convert it to a normalize measurement. So some rules about languages and regular expressions… Any finite language can be represented by at least one if not more regular expressions A regular expressions is almost a rule syntax for expressing how regular languages can be formed regular expressions are cool For a regular expression to be valid for a language it must be able to generate all the words in the language and no other words. This is important. It doesn’t help me if my regular expression parses 100% of my measurement texts but also lets one or two invalid texts to pass as well. Okay, so this posting jumps around a bit – but introduces some very basic fundamentals for the subject which will be built on in later postings… Time to go and do some practical examples now…

Read the article

Social Business Forum Milano: Day 2

- by me

@YourService. The business world has flipped and small business can capitalize by Frank Eliason (twitter: @FrankEliason ) Technology and social media tools have made it easier than ever for companies to communicate with consumers. They can listen and join in on conversations, solve problems, get instant feedback about their products and services, and more. So why, then, are most companies not doing this? Instead, it seems as if customer service is at an all time low, and that the few companies who are choosing to focus on their customers are experiencing a great competitive advantage. At Your Service explains the importance of refocusing your business on your customers and your employees, and just how to do it. Explains how to create a culture of empowered employees who understand the value of a great customer experience Advises on the need to communicate that experience to their customers and potential customers Frank Eliason, recognized by BusinessWeek as the 'most famous customer service manager in the US, possibly in the world,' has built a reputation for helping large businesses improve the way they connect with customers and enhance their relationships Quotes from the Audience: Bertrand Duperrin ?@bduperrin social service is not about shutting up the loudest cutsomers ! #sbf12 @frankeliason Paolo Pelloni ?@paolopelloniGautam Ghosh ?@GautamGhosh RT @cecildijoux: #sbf12 @frankeliason you need to change things and fix the approach it's not about social media it's about driving change Peter H. Reiser ?@peterreiser #sbf12 Company Experience = Product Experience + Customer Interactions + Employee Experience @yourservice Engage or lose! Socialize, mobilize, conversify: engage your employees to improve business performance Christian Finn (twitter: @cfinn) First Christian was presenting the flying monkey Then he outlined the four principals to fix the Intranet: 1. Socalize the Intranet 2. Get Thee to a Single Repository 3. Mobilize the Intranet 4. Conversationalize Your Processes Quotes from the Audience: Oscar Berg ?@oscarberg Engaged employees think their work bring out the best of their ideas @cfinn #sbf12 http://pic.twitter.com/68eddp48 John Stepper ?@johnstepper I like @cfinn's "conversify your processes" A nice related concept to "narrating your work", part of working out loud. http://johnstepper.com/2012/05/26/working-out-loud-your-personal-content-strategy/ Oscar Berg ?@oscarberg Organizations are talent markets - socializing your intranet makes this market function better @cfinn #sbf12 For profit, productivity, and personal benefit: creating a collaborative culture at Deutsche Bank John Stepper (twitter:@johnstepper) Driving adoption of collaboration + social media platforms at Deutsche Bank. John shared some great best practices on how to deploy an enterprise wide community model in a large company. He started with the most important question What is the commercial value of adding social ? Then he talked about the success of Community of Practices deployment and outlined some key use cases including the relevant measures to proof the ROI of the investment. Examples: Community of practice -> measure: systematic collection of value stories Self-service website -> measure: based on representative models Optimizing asset inventory - > measure: Actual counts This use case was particular interesting. It is a crowd sourced spending/saving of infrastructure model. User can cancel IT services they don't need (as example Software xx). 5% of the saving goes to social responsibility projects. The John outlined some best practices on how to address the WIIFM (What's In It For Me) question of the individual users: - change from hierarchy to graph - working out loud = observable work + narrating your work - add social skills to career objectives - example: building a purposeful social network course/training as part of the job development curriculum And last but not least John gave some important tips on how to get senior management buy-in by establishing management sponsored division level collaboration boards which defines clear uses cases and measures. This divisional use cases are then implemented using a common social platform. Thanks John - I learned a lot from your presentation! Quotes from the Audience: Ana Silva ?@AnaDataGirl #sbf12 what's in it for individuals at Deutsche Bank? Shapping their reputations in a big org says @johnstepper #e20Ana Silva ?@AnaDataGirl Any reason why not? MT @magatorlibero #sbf12 is Deutsche B. experience on applying social inside company applicable to Italian people? Oscar Berg ?@oscarberg Your career is not a ladder, it is a network that opens up opportunities - @johnstepper #sbf12 Oscar Berg ?@oscarberg @johnstepper: Institutionalizing collaboration is next - collaboration woven into the fabric of daily work #sbf12 Ana Silva ?@AnaDataGirl #sbf12 @johnstepper talking about how Deutsche Bank is using #socbiz to build purposeful CoP & save money

Read the article

AWS: setting up auto-scale for EC2 instances

- by Elton Stoneman

Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/16/aws-setting-up-auto-scale-for-ec2-instances.aspxWith Amazon Web Services, there’s no direct equivalent to Azure Worker Roles – no Elastic Beanstalk-style application for .NET background workers. But you can get the auto-scale part by configuring an auto-scaling group for your EC2 instance. This is a step-by-step guide, that shows you how to create the auto-scaling configuration, which for EC2 you need to do with the command line, and then link your scaling policies to CloudWatch alarms in the Web console. I’m using queue size as my metric for CloudWatch, which is a good fit if your background workers are pulling messages from a queue and processing them. If the queue is getting too big, the “high” alarm will fire and spin up a new instance to share the workload. If the queue is draining down, the “low” alarm will fire and shut down one of the instances. To start with, you need to manually set up your app in an EC2 VM, for a background worker that would mean hosting your code in a Windows Service (I always use Topshelf). If you’re dual-running Azure and AWS, then you can isolate your logic in one library, with a generic entry point that has Start() and Stop() functions, so your Worker Role and Windows Service are essentially using the same code. When you have your instance set up with the Windows Service running automatically, and you’ve tested it starts up and works properly from a reboot, shut the machine down and take an image of the VM, using Create Image (EBS AMI) from the Web Console: When that completes, you’ll have your own AMI which you can use to spin up new instances, and you’re ready to create your auto-scaling group. You need to dip into the command-line tools for this, so follow this guide to set up the AWS autoscale command line tool. Now we’re ready to go. 1. Create a launch configuration This launch configuration tells AWS what to do when a new instance needs to be spun up. You create it with the as-create-launch-config command, which looks like this: as-create-launch-config sc-xyz-launcher # name of the launch config --image-id ami-7b9e9f12 # id of the AMI you extracted from your VM --region eu-west-1 # which region the new instance gets created in --instance-type t1.micro # size of the instance to create --group quicklaunch-1 #security group for the new instance 2. Create an auto-scaling group The auto-scaling group links to the launch config, and defines the overall configuration of the collection of instances: as-create-auto-scaling-group sc-xyz-asg # auto-scaling group name --region eu-west-1 # region to create in --launch-configuration sc-xyz-launcher # name of the launch config to invoke for new instances --min-size 1 # minimum number of nodes in the group --max-size 5 # maximum number of nodes in the group --default-cooldown 300 # period to wait (in seconds) after each scaling event, before checking if another scaling event is required --availability-zones eu-west-1a eu-west-1b eu-west-1c # which availability zones you want your instances to be allocated in – multiple entries means EC@ will use any of them 3. Create a scale-up policy The policy dictates what will happen in response to a scaling event being triggered from a “high” alarm being breached. It links to the auto-scaling group; this sample results in one additional node being spun up: as-put-scaling-policy scale-up-policy # policy name -g sc-psod-woker-asg # auto-scaling group the policy works with --adjustment 1 # size of the adjustment --region eu-west-1 # region --type ChangeInCapacity # type of adjustment, this specifies a fixed number of nodes, but you can use PercentChangeInCapacity to make an adjustment relative to the current number of nodes, e.g. increasing by 50% 4. Create a scale-down policy The policy dictates what will happen in response to a scaling event being triggered from a “low” alarm being breached. It links to the auto-scaling group; this sample results in one node from the group being taken offline: as-put-scaling-policy scale-down-policy -g sc-psod-woker-asg "--adjustment=-1" # in Windows, use double-quotes to surround a negative adjustment value –-type ChangeInCapacity --region eu-west-1 5. Create a “high” CloudWatch alarm We’re done with the command line now. In the Web Console, open up the CloudWatch view and create a new alarm. This alarm will monitor your metrics and invoke the scale-up policy from your auto-scaling group, when the group is working too hard. Configure your metric – this example will fire the alarm if there are more than 10 messages in my queue for over a minute: Then link the alarm to the scale-up policy in your group: 6. Create a “low” CloudWatch alarm The opposite of step 4, this alarm will trigger when the instances in your group don’t have enough work to do (e.g fewer than 2 messages in the queue for 1 minute), and will invoke the scale-down policy. And that’s it. You don’t need your original VM as the auto-scale group has a minimum number of nodes connected. You can test out the scaling by flexing your CloudWatch metric – in this example, filling up a queue from a stub publisher – and watching AWS create new nodes as required, then stopping the publisher and watch AWS kill off the spare nodes.

Read the article

Customize Team Build 2010 – Part 16: Specify the relative reference path

In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application Part 16: Specify the relative reference path As I have already blogged about, it is not intuitive how to specify the paths where the build server has to look for references that are stored in Source Control. It is a common practice to store 3rd party libraries in Source Control, so they are available to everyone, everyone uses the same version of the libraries and updating a library can be done centrally. In Team Build 2010 these paths are specified as a parameter for MSBuild. What we will do in this post is building the values for this parameter based on the values in an argument. You are now pretty aware how to customize the build template, so let’s do the modifications in another way. Instead of opening the xaml file in the workflow designer, we open it in the XML editor. You can open it in the XML Editor by either selecting the Open with menu (see the context menu), or by choosing the View code option. To add this functionality we need to: Specify a new argument Add the argument to the metadata Build the absolute paths for the references and add these paths to the MSBuild arguments 1. Specify a new argument Locate at the top of the document the Members (which are the arguments) of the XAML and add the following line <x:Property Name="ReferencePaths" Type="InArgument(s:String[])" /> 2. Add the argument to the metadata Then locate the line <mtbw:ProcessParameterMetadataCollection> and paste the following line <mtbw:ProcessParameterMetadata Category="Misc" Description="The list of reference paths, relative to the root path in the Workspace mapping." DisplayName="Reference paths" ParameterName="ReferencePaths" /> 3. Build the absolute paths for the references and add these paths to the MSBuild arguments Now locate the place where the assignments are done to the variables used in the agent. And add the following lines after the last Assign activity <Sequence DisplayName="Initialize ReferencePath" sap:VirtualizedContainerService.HintSize="464,428"> <Sequence.Variables> <Variable x:TypeArguments="x:String" Name="ReferencePathsArgument"> <Variable.Default> <Literal x:TypeArguments="x:String" Value="" /> </Variable.Default> </Variable> </Sequence.Variables> <sap:WorkflowViewStateService.ViewState> <scg:Dictionary x:TypeArguments="x:String, x:Object"> <x:Boolean x:Key="IsExpanded">True</x:Boolean> </scg:Dictionary> </sap:WorkflowViewStateService.ViewState> <ForEach x:TypeArguments="x:String" DisplayName="Iterate through the paths" sap:VirtualizedContainerService.HintSize="287,206" mtbwt:BuildTrackingParticipant.Importance="Low" Values="[ReferencePaths]"> <ActivityAction x:TypeArguments="x:String"> <ActivityAction.Argument> <DelegateInArgument x:TypeArguments="x:String" Name="path" /> </ActivityAction.Argument> <Assign x:TypeArguments="x:String" DisplayName="Build ReferencePath argument" sap:VirtualizedContainerService.HintSize="257,100" mtbwt:BuildTrackingParticipant.Importance="Low" To="[ReferencePathsArgument]" Value="[If(String.IsNullOrEmpty(ReferencePathsArgument), "", ReferencePathsArgument + ";") + IO.Path.Combine(SourcesDirectory, path)]" /> </ActivityAction> </ForEach> <Assign DisplayName="Append the reference paths to the MSBuild Arguments" sap:VirtualizedContainerService.HintSize="287,58"> <Assign.To> <OutArgument x:TypeArguments="x:String">[MSBuildArguments]</OutArgument> </Assign.To> <Assign.Value> <InArgument x:TypeArguments="x:String">[String.Format("{0} /p:ReferencePath=""{1}""", MSBuildArguments, ReferencePathsArgument)]</InArgument> </Assign.Value> </Assign> </Sequence> Now you can use the template to specify the paths relative to SourcesDirectory. You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

Read the article

jQuery Templates - XHTML Validation

- by hajan

Many developers have already asked me about this. How to make XHTML valid the web page which uses jQuery Templates. Maybe you have already tried, and I don't know what are your results but here is my opinion regarding this. By default, Visual Studio.NET adds the xhtml1-transitional.dtd schema <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> So, if you try to validate your page which has jQuery Templates against this schema, your page won't be XHTML valid. Why? It's because when creating templates, we use HTML tags inside <script> ... </script> block. Yes, I know that the script block has type="text/html" but it's not supported in this schema, thus it's not valid. Let's try validate the following code Code <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head> <title>jQuery Templates :: XHTML Validation</title> <script src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.min.js" type="text/javascript"></script> <script src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js" type="text/javascript"></script> <script language="javascript" type="text/javascript"> $(function () { var attendees = [ { Name: "Hajan", Surname: "Selmani", speaker: true, phones: [070555555, 071888999, 071222333] }, { Name: "Denis", Surname: "Manski", phones: [070555555, 071222333] } ]; $("#myTemplate").tmpl(attendees).appendTo("#attendeesList"); }); </script> <script id="myTemplate" type="text/html"> <li> ${Name} ${Surname} {{if speaker}} (<font color="red">speaks</font>) {{else}} (attendee) {{/if}} </li> </script> </head> <body> <ol id="attendeesList"></ol> </body> </html> To validate it, go to http://validator.w3.org/#validate_by_input and copy paste the code rendered on client-side browser (it’s almost the same, only the template is rendered inside OL so LI tags are created for each item). Press CHECK and you will get: Result: 1 Errors, 2 warning(s) The error message says: Validation Output: 1 Error Line 21, Column 13: document type does not allow element "li" here <li> Yes, the <li> HTML element is not allowed inside the <script>, so how to make it valid? FIRST: Using <![CDATA][…]]> The first thing that came in my mind was the CDATA. So, by wrapping any HTML tag which is in script blog, inside <![CDATA[ ........ ]]> it will make our code valid. However, the problem is that the template won't render since the template tags {} cannot get evaluated if they are inside CDATA. Ok, lets try with another approach. SECOND: HTML5 validation Well, if we just remove the strikethrough part bellow of the !DOPCTYPE <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> our template is going to be checked as HTML5 and will be valid. Ok, there is another approach I've also tried: THIRD: Separate template to an external file We can separate the template to external file. I didn’t show how to do this previously, so here is the example. 1. Add HTML file with name Template.html in your ASPX website. 2. Place your defined template there without <script> tag Content inside Template.html <li> ${Name} ${Surname} {{if speaker}} (<font color="red">speaks</font>) {{else}} (attendee) {{/if}} </li> 3. Call the HTML file using $.get() jQuery ajax method and render the template with data using $.tmpl() function. $.get("/Templates/Template.html", function (template) { $.tmpl(template, attendees).appendTo("#attendeesList"); }); So the complete code is: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head> <title>jQuery Templates :: XHTML Validation</title> <script src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.min.js" type="text/javascript"></script> <script src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js" type="text/javascript"></script> <script language="javascript" type="text/javascript"> $(function () { var attendees = [ { Name: "Hajan", Surname: "Selmani", speaker: true, phones: [070555555, 071888999, 071222333] }, { Name: "Denis", Surname: "Manski", phones: [070555555, 071222333] } ]; $.get("/Templates/Template.html", function (template) { $.tmpl(template, attendees).appendTo("#attendeesList"); }); }); </script> </head> <body> <ol id="attendeesList"></ol> </body> </html> This document was successfully checked as XHTML 1.0 Transitional! Result: Passed If you have any additional methods for XHTML validation, you can share it :). Thanks,Hajan

Read the article

Finding a person in the forest

- by PointsToShare

© 2011 By: Dov Trietsch. All rights reserved finding a person in the forest or Limiting the AD result in SharePoint People Picker There are times when we need to limit the SharePoint audience of certain farms or servers or site collections to a particular audience. One of my experiences involved limiting access to US citizens, another to a particular location. Now, most of us – your humble servant included – are not Active Directory experts – but we must be able to handle the “audience restrictions” as required. So here is how it’s done in a nutshell. Important note. Not all could be done in PowerShell (at least not yet)! There are no Windows PowerShell commands to configure People Picker. The stsadm command is: stsadm -o setproperty -pn peoplepicker-searchadcustomquery -pv ADQuery –url http://somethingOrOther Note the long-hyphenated property name. Now to filling the ADQuery. LDAP Query in a nutshell Syntax LDAP is no older than SQL and an LDAP query is actually a query against the LDAP Database. LDAP attributes are the equivalent of Database columns, so why do we have to learn a new query language? Beats me! But we must, so here it is. The syntax of an LDAP query string is made of individual statements with relational operators including: = Equal <= Lower than or equal >= Greater than or equal… and memberOf – a group membership. ! Not * Wildcard Equal and memberOf are the most commonly used. Checking for absence uses the ! – not and the * - wildcard Example: (SN=Grant) All whose last name – SurName – is Grant Example: (!(SN=Grant)) All except Grant Example: (!(SN=*)) all where there is no SurName i.e SurName is absent (probably Rappers). Example: (CN=MyGroup) Common Name is MyGroup. Example: (GN=J*) all the Given Names that start with J (JJ, Jane, Jon, John, etc.) The cryptic SN, CN, GN, etc. are attributes and more about them later All the queries are enclosed in parentheses (Query). Complex queries are comprised of sets that are in AND or OR conditions. AND is denoted by the ampersand (&) and the OR is denoted by the vertical pipe (|). The general syntax is that of the Prefix polish notation where the operand precedes the variables. E.g +ab is the sum of a and b. In an LDAP query (&(A)(B)) will garner the objects for which both A and B are true. In an LDAP query (&(A)(B)(C)) will garner the objects for which A, B and C are true. There’s no limit to the number of conditions. In an LDAP query (|(A)(B)) will garner the objects for which either A or B are true. In an LDAP query (|(A)(B)(C)) will garner the objects for which at least one of A, B and C is true. There’s no limit to the number of conditions. More complex queries have both types of conditions and the parentheses determine the order of operations. Attributes Now let’s get into the SN, CN, GN, and other attributes of the query SN – is the SurName (last name) GN – is the Given Name (first name) CN – is the Common Name, usually GN followed by SN OU – is an Organization Unit such as division, department etc. DC – is a Domain Content in the AD forest l – lower case ‘L’ stands for location. Jerusalem anybody? Or Katmandu. UPN – User Principal Name, is usually the first part of an email address. By nature it is unique in the forest. Most systems set the UPN to be the first initial followed by the SN of the person involved. Some limit the total to 8 characters. If we have many ‘jsmith’ we have to somehow distinguish them from each other. DN – is the distinguished name – a name unique to AD forest in which it lives. Usually it’s a CN with some domain or group distinguishers. DN is important in conjunction with the memberOf relation. Groups have stricter requirement. Each group has to have a unique name - its CN and it has to be unique regardless of its place. See more below. All of the attributes are case insensitive. CN, cn, Cn, and cN are identical. objectCategory is an element that requires special consideration. AD contains many different object like computers, printers, and of course people and groups. In the queries below, we’re limiting our search to people (person). Putting it altogether Let’s get a list of all the Johns in the SPAdmin group of the Jerusalem that local domain. (&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local)) The memberOf=cn=SPAdmin uses the cn (Common Name) of the SPAdmin group. This is how the memberOf relation is used. ‘SPAdmin’ is actually the DN of the group. Also the memberOf relation does not allow wild cards (*) in the group name. Also, you are limited to at most one ‘OU’ entry. Let’s add Marvin Minsky to the search above. |(&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local))(CN=Marvin Minsky) Here I added the or pipeline at the beginning of the query and put the CN requirement for Minsky at the end. Note that if Marvin was already in the prior result, he’s not going to be listed twice. One last note: You may see a dryer but more complete list of attributes rules and examples in: http://www.tek-tips.com/faqs.cfm?fid=5667 And finally (thus negating the claim that my previous note was last), to the best of my knowledge there are 3 more ways to limit the audience. One is to use the peoplepicker-searchadcustomfilter property using the same ADQuery. This works only in SP1 and above. The second is to limit the search to users within this particular site collection – the property name is peoplepicker-onlysearchwithinsitecollection and the value is yes (-pv yes) And the third is –pn peoplepicker-serviceaccountdirectorypaths –pv “OU=ou1,DC=dc1…..” Again you are limited to at most one ‘OU’ phrase – no OU=ou1,OU=ou2… And now the real end. The main property discussed in this sprawling and seemingly endless monogram – peoplepicker-searchadcustomquery - is the most general way of getting the job done. Here are a few examples of command lines that worked and some that didn’t. Can you see why? C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (!Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,OU=OUMid,OU=OUTop,DC=TopDC,DC=MidDC,DC=BottomDC) Command line error. Too many OUs C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully. That’s all folks!

Read the article

Beyond Chatting: What ‘Social’ Means for CRM

- by Natalia Rachelson

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A guest post by Steve Diamond, Senior Director, Outbound Product Management, Oracle In a recent post on this blog, my colleague Steve Boese asked three questions related to the widespread popularity and incredibly rapid growth of Facebook, Pinterest, and LinkedIn. Steve then addressed the many applications for collaborative solutions in the area of Human Capital Management. So, in turning to a conversation about Customer Relationship Management (CRM) and Sales Force Automation (SFA), let me ask you one simple question. How many sales people, particularly at business-to-business companies, consistently meet or beat their quotas in their roles by working alone, with no collaboration among fellow sales people, sales executives, employees in product groups, in service, in Legal, third-party partners, etc.? Hello? Is anybody out there? What’s that cricket noise I hear? That’s correct. Nobody! When it comes to Sales, introverts arguably have a distinct disadvantage. While it’s certainly a truism that “success” in most professional endeavors requires working with people, it’s a mandatory success factor in Sales. This fact became abundantly clear to me one early morning in the late 1990s when I joined the former Hyperion Solutions (now part of Oracle) and attended a Sales Award Ceremony. The Head of Sales at that time gave out dozens of awards – none of them to individuals and all of them to TEAMS of individuals. That’s how it works in Sales. Your colleagues help provide you with product intelligence and competitive intelligence. They help you build the best presentations, pitches, and proposals. They help you develop the most killer RFPs. They align you with the best product people to ensure you’re matching the best products for the opportunity and join you in critical meetings. They help knock the socks of your prospects in “bake off” demo’s. They bring in the best partners to either add complementary products to your opportunity or help you implement a solution. They work with you as a collective team. And so how is all this collaboration STILL typically done today? Through email. And yet we all silently or not so silently grimace about email. It’s relatively siloed. It’s painful to search. It’s difficult to align by topic. And it’s nearly impossible to re-trace meaningful and helpful conversations that occurred among a group or a team at some point in history. This is where social networking for Sales comes into play. It’s about PURPOSEFUL social networking versus chattering. What is purposeful social networking? It’s collaboration that’s built around opportunities, accounts, and contacts. It’s collaboration that delivers valuable context – on the target company, and on key competitors – just to name two examples. It’s collaboration that can scale to provide coaching for larger numbers of sales representatives, both for general purposes, and as we’ve largely discussed here, for specific ‘deals.’ And it’s collaboration that allows a team of people to collectively edit and iterate on a document like an RFP or a soon-to-be killer presentation that is maintained in a central repository, with no time wasted searching for it or worrying about version control. But lest we get carried away, let’s remember that collaboration “happens” among sales people whether there is specialized software to support it or not. The human practice of sales has not changed much in the last 80 to 90 years. Collaboration has been a mainstay during this entire time. But what social networking in general, and Oracle Social Networking in particular delivers, is the opportunity for sales teams to dramatically increase their effectiveness and efficiency – to identify and close more high quality and lucrative opportunities more quickly. For most sales organizations, this is how the game is won. To learn more please visit Oracle Social Network and Oracle Fusion Customer Relationship Management on oracle.com Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

World Record Batch Rate on Oracle JD Edwards Consolidated Workload with SPARC T4-2

- by Brian

Oracle produced a World Record batch throughput for single system results on Oracle's JD Edwards EnterpriseOne Day-in-the-Life benchmark using Oracle's SPARC T4-2 server running Oracle Solaris Containers and consolidating JD Edwards EnterpriseOne, Oracle WebLogic servers and the Oracle Database 11g Release 2. The workload includes both online and batch workload. The SPARC T4-2 server delivered a result of 8,000 online users while concurrently executing a mix of JD Edwards EnterpriseOne Long and Short batch processes at 95.5 UBEs/min (Universal Batch Engines per minute). In order to obtain this record benchmark result, the JD Edwards EnterpriseOne, Oracle WebLogic and Oracle Database 11g Release 2 servers were executed each in separate Oracle Solaris Containers which enabled optimal system resources distribution and performance together with scalable and manageable virtualization. One SPARC T4-2 server running Oracle Solaris Containers and consolidating JD Edwards EnterpriseOne, Oracle WebLogic servers and the Oracle Database 11g Release 2 utilized only 55% of the available CPU power. The Oracle DB server in a Shared Server configuration allows for optimized CPU resource utilization and significant memory savings on the SPARC T4-2 server without sacrificing performance. This configuration with SPARC T4-2 server has achieved 33% more Users/core, 47% more UBEs/min and 78% more Users/rack unit than the IBM Power 770 server. The SPARC T4-2 server with 2 processors ran the JD Edwards "Day-in-the-Life" benchmark and supported 8,000 concurrent online users while concurrently executing mixed batch workloads at 95.5 UBEs per minute. The IBM Power 770 server with twice as many processors supported only 12,000 concurrent online users while concurrently executing mixed batch workloads at only 65 UBEs per minute. This benchmark demonstrates more than 2x cost savings by consolidating the complete solution in a single SPARC T4-2 server compared to earlier published results of 10,000 users and 67 UBEs per minute on two SPARC T4-2 and SPARC T4-1. The Oracle DB server used mirrored (RAID 1) volumes for the database providing high availability for the data without impacting performance. Performance Landscape JD Edwards EnterpriseOne Day in the Life (DIL) Benchmark Consolidated Online with Batch Workload System Rack Units BatchRate(UBEs/m) Online Users Users /Units Users /Core Version SPARC T4-2 (2 x SPARC T4, 2.85 GHz) 3 95.5 8,000 2,667 500 9.0.2 IBM Power 770 (4 x POWER7, 3.3 GHz, 32 cores) 8 65 12,000 1,500 375 9.0.2 Batch Rate (UBEs/m) — Batch transaction rate in UBEs per minute Configuration Summary Hardware Configuration: 1 x SPARC T4-2 server with 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 4 x 300 GB 10K RPM SAS internal disk 2 x 300 GB internal SSD 2 x Sun Storage F5100 Flash Arrays Software Configuration: Oracle Solaris 10 Oracle Solaris Containers JD Edwards EnterpriseOne 9.0.2 JD Edwards EnterpriseOne Tools (8.98.4.2) Oracle WebLogic Server 11g (10.3.4) Oracle HTTP Server 11g Oracle Database 11g Release 2 (11.2.0.1) Benchmark Description JD Edwards EnterpriseOne is an integrated applications suite of Enterprise Resource Planning (ERP) software. Oracle offers 70 JD Edwards EnterpriseOne application modules to support a diverse set of business operations. Oracle's Day in the Life (DIL) kit is a suite of scripts that exercises most common transactions of JD Edwards EnterpriseOne applications, including business processes such as payroll, sales order, purchase order, work order, and manufacturing processes, such as ship confirmation. These are labeled by industry acronyms such as SCM, CRM, HCM, SRM and FMS. The kit's scripts execute transactions typical of a mid-sized manufacturing company. The workload consists of online transactions and the UBE – Universal Business Engine workload of 61 short and 4 long UBEs. LoadRunner runs the DIL workload, collects the user’s transactions response times and reports the key metric of Combined Weighted Average Transaction Response time. The UBE processes workload runs from the JD Enterprise Application server. Oracle's UBE processes come as three flavors: Short UBEs < 1 minute engage in Business Report and Summary Analysis, Mid UBEs > 1 minute create a large report of Account, Balance, and Full Address, Long UBEs > 2 minutes simulate Payroll, Sales Order, night only jobs. The UBE workload generates large numbers of PDF files reports and log files. The UBE Queues are categorized as the QBATCHD, a single threaded queue for large and medium UBEs, and the QPROCESS queue for short UBEs run concurrently. Oracle's UBE process performance metric is Number of Maximum Concurrent UBE processes at transaction rate, UBEs/minute. Key Points and Best Practices Two JD Edwards EnterpriseOne Application Servers, two Oracle WebLogic Servers 11g Release 1 coupled with two Oracle Web Tier HTTP server instances and one Oracle Database 11g Release 2 database on a single SPARC T4-2 server were hosted in separate Oracle Solaris Containers bound to four processor sets to demonstrate consolidation of multiple applications, web servers and the database with best resource utilizations. Interrupt fencing was configured on all Oracle Solaris Containers to channel the interrupts to processors other than the processor sets used for the JD Edwards Application server, Oracle WebLogic servers and the database server. A Oracle WebLogic vertical cluster was configured on each WebServer Container with twelve managed instances each to load balance users' requests and to provide the infrastructure that enables scaling to high number of users with ease of deployment and high availability. The database log writer was run in the real time RT class and bound to a processor set. The database redo logs were configured on the raw disk partitions. The Oracle Solaris Container running the Enterprise Application server completed 61 Short UBEs, 4 Long UBEs concurrently as the mixed size batch workload. The mixed size UBEs ran concurrently from the Enterprise Application server with the 8,000 online users driven by the LoadRunner. See Also SPARC T4-2 Server oracle.com OTN JD Edwards EnterpriseOne oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Oracle Fusion Middleware oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 09/30/2012.

Read the article

MSCC: Scripting - Administrator's toolbox of magic...

Finally, we made it to have our April meetup - in May. The most obvious explanation is the increased amount of open source and IT activities that either the MSCC, the Linux User Group of Mauritius (LUGM), or the University of Mauritius Student's Computer Club is organising. It's absolutely incredible to see the recent hype of events here on the island. And I'm loving it! Unfortunately, we also had to deal with arranging for a location this time. It was kind of an odyssey as my requests (and phone calls) haven't been answered, even though I tried it several times - well, kind of disappointing and I have to look into that for future gatherings. In my opinion, it is essential that two parameters of a community meeting are fixed as early as possible: Location, and Date and time You can't just change one or both on the very last minute. Well, this time we had to do it due to unforeseen reasons, and I apologise to any MSCC member which couldn't make it to our April meetup. Okay, lesson learned but now back to the actual meetup report ... Shortly after the meeting I placed the following statement as my first impression: "Spontaneous and improvised :) No, seriously, Ish and Dan had well prepared presentations on shell scripting, mainly focused towards Bourne Again Shell (bash), and the pros and cons of scripting versus actually writing something in a decent programming language. I thought that I could cut myself out of the equation but the demand for information about PowerShell was higher than expected..." Well, it turned out that the interest in Windows PowerShell was high, as I even got a couple of questions on it via social media networks during the evening. I also like to mention that the number of attendees went back to what I would call a "standard" number of participation. This time there were 12 craftsmen, but again a good number of First Timers. Reactions of other attendees Here are some impressions and feedback from our participants: "Enjoyed the bash and powershell (linux / windows) presentations ..." -- Nadim on event comments "He [Daniel] also showed us some syntax loopholes in Bash that could leave someone with bad code." -- Ish on MSCC – Let's talk about Scripting Glad to see a couple of first time attendees, especially students from the university itself. Some details on the presentations MSCC: First time visit at the University of Mauritius - Phase II Engineering Tower, room 2.9 Gimme some love ... bash and other shells Ish gave a great introduction into shell scripting as he spoke about existing shell environments and a little bit about their history. Furthermore, he talked about various built-in commands, the use of coreutils, the ability to daisy-chain multiple commands using pipes, the importance of the standard I/O streams and their file descriptors in advanced scripting techniques. Combined with a couple of sample statements in the Linux terminal on Ubuntu 14.04 machine it was a solid presentation. Have a closer look at his slides - published on his blog on MSCC – Let's talk about Scripting. Oddities of scripting After the brief introduction into bash it was Daniel's turn to highlight a good number of oddities when working with shell scripts. First of all, it should be clear that scripting is not supposed for any kind of implementations in terms of software but simply to automate administrative procedures and to simplify routine jobs on a system. One of the cool oddities that he mentioned is that everything (!) in a shell is represented by strings; there are no other types like integer, float, date-time, etc. that you'd like to use in a full-fledged programming language. Let's have a look at his sample: more to come... What's the output? As a conclusion, Daniel suggests that shell scripting should be limited but not restricted to automatic repetitive command stacks and batch jobs, startup wrapper for applications in order to set up the execution environment, and other not too sophisticated jobs. But as soon as it might involve a little bit more logic or you might rely on performance it's better to write an application in Ruby, Python, or Perl (among others of course). This is also enables the possibility to test your code properly. MSCC: Ish talking about Bourne Again Shell (bash) and shell scripting to automate regular tasks MSCC: Daniel gives an overview about the pros and cons of shell scripting versus programming MSCC: PowerShell as your scripting solution on Windows operating systems The path of the Enlightened is long ... and tough. Honestly, even though PowerShell was mentioned without any further details on the meetup's agenda, I didn't expect that there would be demand to give a presentation on Microsoft PowerShell after all. I already took this topic out of the announcement but the audience wanted to have some information. Okay, then let's see what I could do - improvised style. While my machine booted and got hooked up to the projector, I started to talk about the beginnings of PowerShell from back in 2006, and its predecessors MS DOS and Command Prompt. A throwback in history... always good for young people. As usual, Microsoft didn't get it at that time. Instead of listening to their client's needs and demands they ignored the feasibility to administrate Windows server farms without any UI tools. PowerShell is actually a result of this, and seeing that shell scripting is a common, reliable and fast way in an administrator's toolbox for decades, Microsoft had to adapt from their Microsoft Management Console (MMC) to a broader approach. It's not like shell scripting was something new; it is in daily use by alternative operating systems like AIX, HP UX, Solaris, and last but not least Linux. Most interestingly, Microsoft is very good at renovating existing architectures, and over the years PowerShell not only replaced their own combination of Command Prompt and Scripting Hosts (VBScript and CScript) but really turned into a challenging competitor on the market. The shell is easy to extend with cmdlets, and open to other Microsoft products like SQL Server, SharePoint, as well as Third-party software applications. Similar to MMC PowerShell also offers the ability to administer other machine remotely - only without a graphical user interface and therefore it's easier to automate and schedule regular tasks. Following is a sample of a PowerShell script file (extension .ps1): $strComputer = "." $colItems = get-wmiobject -class Win32_BIOS -namespace root\CIMV2 -comp $strComputer foreach ($objItem in $colItems) {write-host "BIOS Characteristics: " $objItem.BiosCharacteristicswrite-host "BIOS Version: " $objItem.BIOSVersionwrite-host "Build Number: " $objItem.BuildNumberwrite-host "Caption: " $objItem.Captionwrite-host "Code Set: " $objItem.CodeSetwrite-host "Current Language: " $objItem.CurrentLanguagewrite-host "Description: " $objItem.Descriptionwrite-host "Identification Code: " $objItem.IdentificationCodewrite-host "Installable Languages: " $objItem.InstallableLanguageswrite-host "Installation Date: " $objItem.InstallDatewrite-host "Language Edition: " $objItem.LanguageEditionwrite-host "List Of Languages: " $objItem.ListOfLanguageswrite-host "Manufacturer: " $objItem.Manufacturerwrite-host "Name: " $objItem.Namewrite-host "Other Target Operating System: " $objItem.OtherTargetOSwrite-host "Primary BIOS: " $objItem.PrimaryBIOSwrite-host "Release Date: " $objItem.ReleaseDatewrite-host "Serial Number: " $objItem.SerialNumberwrite-host "SMBIOS BIOS Version: " $objItem.SMBIOSBIOSVersionwrite-host "SMBIOS Major Version: " $objItem.SMBIOSMajorVersionwrite-host "SMBIOS Minor Version: " $objItem.SMBIOSMinorVersionwrite-host "SMBIOS Present: " $objItem.SMBIOSPresentwrite-host "Software Element ID: " $objItem.SoftwareElementIDwrite-host "Software Element State: " $objItem.SoftwareElementStatewrite-host "Status: " $objItem.Statuswrite-host "Target Operating System: " $objItem.TargetOperatingSystemwrite-host "Version: " $objItem.Versionwrite-host} Which gives you information about your BIOS and Windows OS. Then change the computer name to another one on your network (NetBIOS based) and run the script again. There lots of samples and tutorials at the Microsoft Script Center, and I would advise you to pay a visit over there if you are more interested in PowerShell. The Script Center provides the download links, too. Upcoming Events What are the upcoming events here in Mauritius? So far, we have the following ones (incomplete list as usual) in chronological order: Hacking Defence (14. May 2014) WebCup Maurice (7. & 8. June 2014) Developers Conference (TBA ~ July 2014) Linuxfest 2014 (TBA ~ November 2014) Hopefully, there will be more announcements during the next couple of weeks and months. If you know about any other event, like a bootcamp, a code challenge or hackathon here in Mauritius, please drop me a note in the comment section below this article. Thanks! My resume of the day Spontaneous and improvised :) The new location at the University of Mauritius turned out very well, there is plenty of space, and it could be a good choice for future meetings. Especially, having the ability to get more and more students into our IT community sounds like a great opportunity. Later during the day, I got some promising mails from Nadim regarding future sessions at the local branch of the Middlesex University. Well, we will see in the future... But for now this will be on hold until approximately October when students resume their regular studies. Anyway, it was a good experience at the university, and thanks again to the UoM Student's Computer Club that made the necessary arrangements for the MSCC!

Read the article

Download Microsoft MSDN Magazine PDF Issues For Offline Reading

- by Kavitha

MSDN Magazine is a must read for every Microsoft developer. It provides in-depth analysis and excellent guides on all the latest Microsoft development tools and technologies. Every month one can grab this magazine on the stands or read it online for free. What if you want to read the magazine offline on your PC or mobile devices? Just grab a PDF version of the magazine and read it whenever you want. The PDF version of MSDN magazines are very handy for travellers who don’t get access to internet always. In this post we are going to provide you links to download PDF version, source code and online version of every month MSDN Magazine issue starting from 2010. Bookmark this post and keep checking it monthly to get access to MSDN Magazine links. December 2010 Issue Download PDF(not yet available) Download Source Code Read Magazine Online November 2010 Issue Download PDF (not yet available) Read Magazine Online Download Source Code October 2010 Issue Download PDF Download Source Code Read Magazine Online September 2010 Issue Download PDF Download Source Code Read Magazine Online August 2010 Issue Download PDF Download Source Code Read Magazine Online July 2010 Issue Download PDF Download Source Code Read Magazine Online June 2010 Issue Download PDF Download Source Code Read Magazine Online May 2010 Issue Download PDF Download Source Code Read Magazine Online April 2010 Issue Download PDF Read Magazine Online Download Source Code March 2010 Issue Download PDF Download Source Code Read Magazine Online February 2010 Issue Download PDF Download Source Code Read Magazine Online January 2010 Issue Download PDF Download Source Code Read Magazine Online This article titled,Download Microsoft MSDN Magazine PDF Issues For Offline Reading, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

Read the article

Running Jetty under Windows Azure Using RoleEntryPoint in a Worker Role

- by Shawn Cicoria

This post is built upon the work of Mario Kosmiskas and David C. Chou’s prior postings – from here: http://blogs.msdn.com/b/mariok/archive/2011/01/05/deploying-java-applications-in-azure.aspx http://blogs.msdn.com/b/dachou/archive/2010/03/21/run-java-with-jetty-in-windows-azure.aspx As Mario points out in his post, when you need to have more control over the process that starts, it generally is better left to a RoleEntryPoint capability that as of now, requires the use of a CLR based assembly that is deployed as part of the package to Azure. There were things I liked especially about Mario’s post – specifically, the ability to pull down the JRE and Jetty runtimes at role startup and instantiate the process using the extracted bits. The way Mario initialized the java process (and Jetty) was to take advantage of a role startup task configured as part of the service definition. This is a great quick way to kick off processes or tasks prior to your role entry point. However, if you need access to service configuration values or role events, that’s where RoleEntryPoint comes in. For this PoC sample I moved the logic for retrieving the bits for the jre and jetty to the worker roles OnStart – in addition to moving the process kickoff to the OnStart method. The Run method at this point is there to loop and just report the status of the java process. Beyond just making things more parameterized, both Mario’s and David’s articles still form the essence of the approach. The solution that accompanies this post provides all the necessary .NET based Visual Studio project. In addition, you’ll need: 1. Jetty 7 runtime http://www.eclipse.org/jetty/downloads.php 2. JRE http://www.oracle.com/technetwork/java/javase/downloads/index.html Once you have these the first step is to create archives (zips) of the distributions. For this PoC, the structure of the archive requires that the root of the archive looks as follows: JRE6.zip jetty---.zip Upload the contents to a storage container (block blob), and for this example I used /archives as the location. The service configuration has several settings that allow, which is the advantage of using RoleEntryPoint, the ability to provide these things via native configuration support from Azure in a worker role. Storage Explorer You can use development storage for testing this out – the zipped version of the solution is configured for development storage. When you’re ready to deploy, you update the two settings – 1 for diagnostics and the other for the storage container where the /archives are going to be stored. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="HostedJetty" osFamily="2" osVersion="*"> <Role name="JettyWorker"> <Instances count="1" /> <ConfigurationSettings>  <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="JettyArchive" value="jetty-distribution-7.3.0.v20110203b.zip" /> <Setting name="StartRole" value="true" /> <Setting name="BlobContainer" value="archives" /> <Setting name="JreArchive" value="jre6.zip" />  <Setting name="StorageCredentials" value="UseDevelopmentStorage=true" /> For interacting with Storage you can use several tools – one tool that I like is from the Windows Azure CAT team located here: http://appfabriccat.com/2011/02/exploring-windows-azure-storage-apis-by-building-a-storage-explorer-application/ and shown in the prior picture At runtime, during role initialization and startup, Azure will call into your RoleEntryPoint. At that time the code will do a dynamic pull of the 2 archives and extract – using the Sharp Zip Lib <link> as Mario had demonstrated in his sample. The only different here is the use of CLR code vs. PowerShell (which is really CLR, but that’s another discussion). At this point, once the 2 zips are extracted, the Role’s file system looks as follows: Worker Role approot From there, the OnStart method (which also does the download and unzip using a simple StorageHelper class) kicks off the Java path and now you have Java! Task Manager Jetty Sample Page A couple of things I’m working on to enhance this is to extract the jre and jetty bits not to the appRoot but to a resource location defined as part of the service definition. ServiceDefinition.csdef <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="HostedJetty" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="JettyWorker"> <Imports> <Import moduleName="Diagnostics" /> <Import moduleName="RemoteAccess" /> <Import moduleName="RemoteForwarder" /> </Imports> <Endpoints> <InputEndpoint name="JettyPort" protocol="tcp" port="80" localPort="8080" /> </Endpoints> <LocalResources> <LocalStorage name="Archives" cleanOnRoleRecycle="false" sizeInMB="100" /> </LocalResources> As the concept matures a bit, being able to update dynamically the content or jar files as part of a running java solution is something that is possible through continued enhancement of this simple model. The Visual Studio 2010 Solution is located here: HostingJavaSln_NDA.zip

Read the article

Easier ASP.NET MVC Routing

- by Steve Wilkes

I've recently refactored the way Routes are declared in an ASP.NET MVC application I'm working on, and I wanted to share part of the system I came up with; a really easy way to declare and keep track of ASP.NET MVC Routes, which then allows you to find the name of the Route which has been selected for the current request. Traditional MVC Route Declaration Traditionally, ASP.NET MVC Routes are added to the application's RouteCollection using overloads of the RouteCollection.MapRoute() method; for example, this is the standard way the default Route which matches /controller/action URLs is created: routes.MapRoute( "Default", "{controller}/{action}/{id}", new { controller = "Home", action = "Index", id = UrlParameter.Optional }); The first argument declares that this Route is to be named 'Default', the second specifies the Route's URL pattern, and the third contains the URL pattern segments' default values. To then write a link to a URL which matches the default Route in a View, you can use the HtmlHelper.RouteLink() method, like this: @ this.Html.RouteLink("Default", new { controller = "Orders", action = "Index" }) ...that substitutes 'Orders' into the {controller} segment of the default Route's URL pattern, and 'Index' into the {action} segment. The {Id} segment was declared optional and isn't specified here. That's about the most basic thing you can do with MVC routing, and I already have reservations: I've duplicated the magic string "Default" between the Route declaration and the use of RouteLink(). This isn't likely to cause a problem for the default Route, but once you get to dozens of Routes the duplication is a pain. There's no easy way to get from the RouteLink() method call to the declaration of the Route itself, so getting the names of the Route's URL parameters correct requires some effort. The call to MapRoute() is quite verbose; with dozens of Routes this gets pretty ugly. If at some point during a request I want to find out the name of the Route has been matched.... and I can't. To get around these issues, I wanted to achieve the following: Make declaring a Route very easy, using as little code as possible. Introduce a direct link between where a Route is declared, where the Route is defined and where the Route's name is used, so I can use Visual Studio's Go To Definition to get from a call to RouteLink() to the declaration of the Route I'm using, making it easier to make sure I use the correct URL parameters. Create a way to access the currently-selected Route's name during the execution of a request. My first step was to come up with a quick and easy syntax for declaring Routes. 1 . An Easy Route Declaration Syntax I figured the easiest way of declaring a route was to put all the information in a single string with a special syntax. For example, the default MVC route would be declared like this: "{controller:Home}/{action:Index}/{Id}*" This contains the same information as the regular way of defining a Route, but is far more compact: The default values for each URL segment are specified in a colon-separated section after the segment name The {Id} segment is declared as optional simply by placing a * after it That's the default route - a pretty simple example - so how about this? routes.MapRoute( "CustomerOrderList", "Orders/{customerRef}/{pageNo}", new { controller = "Orders", action = "List", pageNo = UrlParameter.Optional }, new { customerRef = "^[a-zA-Z0-9]+$", pageNo = "^[0-9]+$" }); This maps to the List action on the Orders controller URLs which: Start with the string Orders/ Then have a {customerRef} set of characters and numbers Then optionally a numeric {pageNo}. And again, it’s quite verbose. Here's my alternative: "Orders/{customerRef:^[a-zA-Z0-9]+$}/{pageNo:^[0-9]+$}*->Orders/List" Quite a bit more brief, and again, containing the same information as the regular way of declaring Routes: Regular expression constraints are declared after the colon separator, the same as default values The target controller and action are specified after the -> The {pageNo} is defined as optional by placing a * after it With an appropriate parser that gave me a nice, compact and clear way to declare routes. Next I wanted to have a single place where Routes were declared and accessed. 2. A Central Place to Declare and Access Routes I wanted all my Routes declared in one, dedicated place, which I would also use for Route names when calling RouteLink(). With this in mind I made a single class named Routes with a series of public, constant fields, each one relating to a particular Route. With this done, I figured a good place to actually declare each Route was in an attribute on the field defining the Route’s name; the attribute would parse the Route definition string and make the resulting Route object available as a property. I then made the Routes class examine its own fields during its static setup, and cache all the attribute-created Route objects in an internal Dictionary. Finally I made Routes use that cache to register the Routes when requested, and to access them later when required. So the Routes class declares its named Routes like this: public static class Routes{ [RouteDefinition("Orders/{customerName}->Orders/Index")] public const string OrdersCustomerIndex = "OrdersCustomerIndex"; [RouteDefinition("Orders/{customerName}/{orderId:^([0-9]+)$}->Orders/Details")] public const string OrdersDetails = "OrdersDetails"; [RouteDefinition("{controller:Home}*/{action:Index}*")] public const string Default = "Default"; } ...which are then used like this: @ this.Html.RouteLink(Routes.Default, new { controller = "Orders", action = "Index" }) Now that using Go To Definition on the Routes.Default constant takes me to where the Route is actually defined, it's nice and easy to quickly check on the parameter names when using RouteLink(). Finally, I wanted to be able to access the name of the current Route during a request. 3. Recovering the Route Name The RouteDefinitionAttribute creates a NamedRoute class; a simple derivative of Route, but with a Name property. When the Routes class examines its fields and caches all the defined Routes, it has access to the name of the Route through the name of the field against which it is defined. It was therefore a pretty easy matter to have Routes give NamedRoute its name when it creates its cache of Routes. This means that the Route which is found in RequestContext.RouteData.Route is now a NamedRoute, and I can recover the Route's name during a request. For visibility, I made NamedRoute.ToString() return the Route name and URL pattern, like this: The screenshot is from an example project I’ve made on bitbucket; it contains all the named route classes and an MVC 3 application which demonstrates their use. I’ve found this way of defining and using Routes much tidier than the default MVC system, and you find it useful too

Read the article

Silverlight Cream for February 26, 2011 -- #1052

- by Dave Campbell

In this Issue: Mark Monster, Gill Cleeren, Pencho Popadiyn, Kevin Dockx, Joost van Schaik, Jesse Liberty, John Papa, Jeremy Likness, Arik Poznanski(-2-), Page Brooks, Deborah Kurata, Mike Snow, Alfred Astort, Samuel Jack, XAMLNinja, and Shawn Wildermuth. Above the Fold: Silverlight: "Asynchronous Callbacks with Rx" Jesse Liberty WP7: "Phoney Windows Phone 7 Project Now Available!" Shawn Wildermuth MVVM: "Validating our ViewModel" Mark Monster Shoutouts: Shawn Wildermuth has a video up of his FadingMessage class to show it off: Introducing Phoney's FadingMessage Class From SilverlightCream.com: Validating our ViewModel Mark Monster discusses Validation in his latest post... using INotifyDataErrorInfo and his own implementation of a ViewModel base that supports it and INPC. Getting ready for Microsoft Silverlight Exam 70-506 (Part 7) Gill Cleeren hits part 7 of his series at SilverlightShow on a great walk through Silverlight and getting ready for the exam. This is the final part and concentrates on deploying apps. Windows Phone 7–Creating Custom Keyboard Pencho Popadiyn has a post at SilverlightShow discussing problems with WP7 keyboards in his native Bulgaria, and his solution to the problem... create his own. 360 Degrees Feedback by Kevin Dockx Kevin Dockx produced a white paper for his company about an employee review solution they did in Silverlight. The white paper is available, and SilverlightShow interviewd Kevin to answer questions about the app. Extended Windows Phone 7 page for handling rotation, focused element updates and back key press Looks like Joost van Schaik has a few posts I've missed... and I'm not going to get to them all today! ... this one is about the base class he uses for WP7 apps... a bunch of utilities he uses... definitely worth a look (and a take). Asynchronous Callbacks with Rx Jesse Liberty has his 8th post in the Rx series up and this one's on Asynchronous Callbacks... if you haven't seen this before, you should definitely look into it... cool stuff, Jesse! Silverlight TV 63: Exploring National Instruments' App Using Data and Business Features John Papa has Silverlight TV number 63 up and is talking to Steve Lasker about National Instruments and their Lab View product. Great demo and discussion. Jounce Part 11: Debugging MEF Jeremy Likness's latest (number 11) in his series on his MVVM framework Jounce is out, and he's discussing how to debug MEF, which Jounce handles nicely through the logging he provides... and you can use it externally to Jounce. Get Twitter Trends on Windows Phone 7 Arik Poznanski has a couple Twitter for WP7 posts up... first is one for pulling Twitter trends from whatthetrend.com... plus the code to do it. Searching Twitter on Windows Phone 7 In his next post, Arik Poznanski shows how to search twitter from your WP7 ... again with code. Tiled Background Control in Silverlight Page Brooks shows how to get a tiled background control in Silverlight ... did you know there was one in the JetPack them? Silverlight Charting: Displaying Data Above the Column Deborah Kurata continues her charting posts with this one displaying the column value above the column. I like this... it has a clean look and all the data is available at a glance. Silverlight: Tasks on the Win7 Mobile Phone Mike Snow has a list of the WP7 tasks available and an example of using them... looks like a pretty good reference! 10 of 10 - Aesthetics and alignment matter Alfred Astort discusses aesthetics and WP7 dev... looks like it's the same as any app development, but if you're not doing it, you should be. Simon Squared – We have Multi-player: Days 4, 5 and (ahem!) 6 Samuel Jack details the completion of his multi-player game for WP7 utilizing Azure, in the hour-by-hour detail he's done the rest... plus a video of the final product! Who ate all the pies!! XAMLNinja has a very good discussion/link set of Charting posts all leading up to a portrait-only version of charting for WP7 with labels that looks looks great Phoney Windows Phone 7 Project Now Available! Shawn Wildermuth has a collection of classes he always uses with WP7 dev, and he's sharing them with all of us a "Phoney" Tools project on Codeplex... and now has a NuGet project also. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

13.10 - Weird WiFi connection problems - WMP300N - Broadcom BCM4321

- by user1898041

Just installed 13.10 on my desktop and I really like it. After having problems with getting the wifi to work, I installed it connected to the internet with an ethernet cable and added in the 3rd party software and updates as per the installation procedure. After installation was completed, I saw the wifi icon in the upper right hand corner, but it was not seeing any wifi networks. Some Googling brought me to use the 'Additional Drivers' application. It found the WMP300N Broadcom BDM4321 based pci wifi card and installed the proprietary Broadcom STA wireless driver, which may have been installed before. I'm not sure. Here is the weird part: when I start my system, wifi seems to be in some sort of suspended state where the system sees that the card exists but the card will not detect any wifi networks. It will work after booting once I 'Additional Drivers' application and then start FireFox. I know it seems weird, but this is the process I've got down to get the card to recognize wifi networks. After those applications are open for a few seconds, the card starts to function like normal (although maintaining the wifi connection is problem but most likely a seperate issue). The reason this is a problem is because this is supposed to just be a headless box managed through SSH. Here are the readouts from the common network diagnosis programs BEFORE I open 'Additional Drivers' and 'FireFox'. All commands were done with sudo. lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) - iwconfig eth1 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off - iwlist scan eth1 No scan results - Here are the various commands AFTER I open 'Additional Drivers' and 'FireFox' lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.103 latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:85 errors:0 dropped:0 overruns:0 frame:11901 TX packets:132 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52641 (52.6 KB) TX bytes:19058 (19.0 KB) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6084 (6.0 KB) TX bytes:6084 (6.0 KB) - iwconfig eth1 IEEE 802.11abg ESSID:"BU" Mode:Managed Frequency:2.447 GHz Access Point: 00:26:F2:1F:81:02 Bit Rate=54 Mb/s Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=59/70 Signal level=-51 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 - iwlist scan A LOT OF SSIDs FOUND! - I'd like to have this problem fixed, but I'm not quite sure where to go. Been Googling a lot and can't seem to find anyone else with this problem.

Read the article

Code excavations, wishful invocations, perimeters and domain specific unit test frameworks

- by RoyOsherove

One of the talks I did at QCON London was about a subject that I’ve come across fairly recently , when I was building SilverUnit – a “pure” unit test framework for silverlight objects that depend on the silverlight runtime to run. It is the concept of “cogs in the machine” – when your piece of code needs to run inside a host framework or runtime that you have little or no control over for testability related matters. Examples of such cogs and machines can be: your custom control running inside silverlight runtime in the browser your plug-in running inside an IDE your activity running inside a windows workflow your code running inside a java EE bean your code inheriting from a COM+ (enterprise services) component etc.. Not all of these are necessarily testability problems. The main testability problem usually comes when your code actually inherits form something inside the system. For example. one of the biggest problems with testing objects like silverlight controls is the way they depend on the silverlight runtime – they don’t implement some silverlight interface, they don’t just call external static methods against the framework runtime that surrounds them – they actually inherit parts of the framework: they all inherit (in this case) from the silverlight DependencyObject Wrapping it up? An inheritance dependency is uniquely challenging to bring under test, because “classic” methods such as wrapping the object under test with a framework wrapper will not work, and the only way to do manually is to create parallel testable objects that get delegated with all the possible actions from the dependencies. In silverlight’s case, that would mean creating your own custom logic class that would be called directly from controls that inherit from silverlight, and would be tested independently of these controls. The pro side is that you get the benefit of understanding the “contract” and the “roles” your system plays against your logic, but unfortunately, more often than not, it can be very tedious to create, and may sometimes feel unnecessary or like code duplication. About perimeters A perimeter is that invisible line that your draw around your pieces of logic during a test, that separate the code under test from any dependencies that it uses. Most of the time, a test perimeter around an object will be the list of seams (dependencies that can be replaced such as interfaces, virtual methods etc.) that are actually replaced for that test or for all the tests. Role based perimeters In the case of creating a wrapper around an object – one really creates a “role based” perimeter around the logic that is being tested – that wrapper takes on roles that are required by the code under test, and also communicates with the host system to implement those roles and provide any inputs to the logic under test. in the image below – we have the code we want to test represented as a star. No perimeter is drawn yet (we haven’t wrapped it up in anything yet). in the image below is what happens when you wrap your logic with a role based wrapper – you get a role based perimeter anywhere your code interacts with the system: There’s another way to bring that code under test – using isolation frameworks like typemock, rhino mocks and MOQ (but if your code inherits from the system, Typemock might be the only way to isolate the code from the system interaction. Ad-Hoc Isolation perimeters the image below shows what I call ad-hoc perimeter that might be vastly different between different tests: This perimeter’s surface is much smaller, because for that specific test, that is all the “change” that is required to the host system behavior. The third way of isolating the code from the host system is the main “meat” of this post: Subterranean perimeters Subterranean perimeters are Deep rooted perimeters - “always on” seams that that can lie very deep in the heart of the host system where they are fully invisible even to the test itself, not just to the code under test. Because they lie deep inside a system you can’t control, the only way I’ve found to control them is with runtime (not compile time) interception of method calls on the system. One way to get such abilities is by using Aspect oriented frameworks – for example, in SilverUnit, I’ve used the CThru AOP framework based on Typemock hooks and CLR profilers to intercept such system level method calls and effectively turn them into seams that lie deep down at the heart of the silverlight runtime. the image below depicts an example of what such a perimeter could look like: As you can see, the actual seams can be very far away form the actual code under test, and as you’ll discover, that’s actually a very good thing. Here is only a partial list of examples of such deep rooted seams : disabling the constructor of a base class five levels below the code under test (this.base.base.base.base) faking static methods of a type that’s being called several levels down the stack: method x() calls y() calls z() calls SomeType.StaticMethod() Replacing an async mechanism with a synchronous one (replacing all timers with your own timer behavior that always Ticks immediately upon calls to “start()” on the same caller thread for example) Replacing event mechanisms with your own event mechanism (to allow “firing” system events) Changing the way the system saves information with your own saving behavior (in silverunit, I replaced all Dependency Property set and get with calls to an in memory value store instead of using the one built into silverlight which threw exceptions without a browser) several questions could jump in: How do you know what to fake? (how do you discover the perimeter?) How do you fake it? Wouldn’t this be problematic - to fake something you don’t own? it might change in the future How do you discover the perimeter to fake? To discover a perimeter all you have to do is start with a wishful invocation. a wishful invocation is the act of trying to invoke a method (or even just create an instance ) of an object using “regular” test code. You invoke the thing that you’d like to do in a real unit test, to see what happens: Can I even create an instance of this object without getting an exception? Can I invoke this method on that instance without getting an exception? Can I verify that some call into the system happened? You make the invocation, get an exception (because there is a dependency) and look at the stack trace. choose a location in the stack trace and disable it. Then try the invocation again. if you don’t get an exception the perimeter is good for that invocation, so you can move to trying out other methods on that object. in a future post I will show the process using CThru, and how you end up with something close to a domain specific test framework after you’re done creating the perimeter you need.

Read the article

How to Increase the VMWare Boot Screen Delay

- by Trevor Bekolay

If you’ve wanted to try out a bootable CD or USB flash drive in a virtual machine environment, you’ve probably noticed that VMWare’s offerings make it difficult to change the boot device. We’ll show you how to change these options. You can do this either for one boot, or permanently for a particular virtual machine. Even experienced users of VMWare Player or Workstation may not recognize the screen above – it’s the virtual machine’s BIOS, which in most cases flashes by in the blink of an eye. If you want to boot up the virtual machine with a CD or USB key instead of the hard drive, then you’ll need more than an eye’s-blink to press Escape and bring up the Boot Menu. Fortunately, there is a way to introduce a boot delay that isn’t exposed in VMWare’s graphical interface – you have to edit the virtual machine’s settings file (a .vmx file) manually. Editing the Virtual Machine’s .vmx Find the .vmx file that contains the settings for your virtual machine. You chose a location for this when you created the virtual machine – in Windows, the default location is a folder called My Virtual Machines in your My Documents folder. In VMWare Workstation, the location of the .vmx file is listed on the virtual machine’s tab. If in doubt, search your hard drive for .vmx files. If you don’t want to use Windows default search, an awesome utility that locates files instantly is Everything. Open the .vmx file with any text editor. Somewhere in this file, enter in the following line… save the file, then close out of the text editor: bios.bootdelay = 20000 This will introduce a 20 second delay when the virtual machine loads up, giving you plenty of time to press the Escape button and access the boot menu. The number in this line is just a value in milliseconds, so for a five second boot delay, enter 5000, and so on. Change Boot Options Temporarily Now, when you boot up your virtual machine, you’ll have plenty of time to enter one of the keystrokes listed at the bottom of the BIOS screen on boot-up. Press Escape to bring up the Boot Menu. This allows you to select a different device to boot from – like a CD drive. Your selection will be forgotten the next time you boot up this virtual machine. Change Boot Options Permanently When the BIOS screen comes up, press F2 to enter the BIOS Setup menu. Switch to the Boot tab, and change the ordering of the items by pressing the “+” key to move items up on the list, and the “-” key to move items down the list. We’ve switched the order so that the CD-ROM Drive boots first. Once you make this change permanent, you may want to re-edit the .vmx file to remove the boot delay. Boot from a USB Flash Drive One thing that is noticeably missing from the list of boot options is a USB device. VMWare’s BIOS just does not allow this, but we can get around that limitation using the PLoP Boot Manager that we’ve previously written about. And as a bonus, since everything is virtual anyway, there’s no need to actually burn PLoP to a CD. Open the settings for the virtual machine you want to boot with a USB drive. Click on Add… at the bottom of the settings screen, and select CD/DVD Drive. Click Next. Click the Use ISO Image radio button, and click Next. Browse to find plpbt.iso or plpbtnoemul.iso from the PLoP zip file. Ensure that Connect at power on is checked, and then click Finish. Click OK on the main Virtual Machine Settings page. Now, if you use the steps above to boot using that CD/DVD drive, PLoP will load, allowing you to boot from a USB drive! Conclusion We’re big fans of VMWare Player and Workstation, as they let us try out a ton of geeky things without worrying about harming our systems. By introducing a boot delay, we can add bootable CDs and USB drives to the list of geeky things we can try out. Download PLoP Boot Manager Similar Articles Productive Geek Tips How To Switch to Console Mode for Ubuntu VMware GuestHack: Turn Off Debug Mode in VMWare Workstation 6 BetaStart Your Computer More Quickly by Delaying the Startup of a Service in VistaEnable Hidden BootScreen in Windows VistaEnable Copy and Paste from Ubuntu VMware Guest TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

Read the article

Out of disk space - /boot at 100%

- by uvasal

My /boot is at 100%. When I run aptitude search ~ilinux-image I'm getting loads of unused images. When I try to delete one of them (after checking which one is currently in use by doing uname -r), e.g apt-get autoremove linux-image-3.2.0-44-generic I get: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-headers-generic (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed linux-server : Depends: linux-headers-server (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). And running apt-get -f install throws No space left on device. I've also tried doing apt-get purge but I am getting the same thing. Output of df -h and dpkg -l linux-*.: root@hb2088:/srv/www# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 9.4G 3.0G 6.0G 34% / udev 301M 4.0K 301M 1% /dev tmpfs 124M 228K 124M 1% /run none 5.0M 0 5.0M 0% /run/lock none 309M 0 309M 0% /run/shm /dev/sda1 92M 91M 0 100% /boot root@hb2088:/srv/www# dpkg -l linux-* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-====================================================-====================================================-======================================================================================================================== un linux-doc-3.2.0 <none> (no description available) ii linux-firmware 1.79.6 Firmware for Linux kernel drivers iU linux-generic 3.2.0.51.61 Complete Generic Linux kernel un linux-headers <none> (no description available) un linux-headers-3 <none> (no description available) un linux-headers-3.0 <none> (no description available) ii linux-headers-3.2.0-44 3.2.0-44.69 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-44-generic 3.2.0-44.69 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-45 3.2.0-45.70 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-45-generic 3.2.0-45.70 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-48 3.2.0-48.74 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-48-generic 3.2.0-48.74 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-51 3.2.0-51.77 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-51-generic 3.2.0-51.77 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-52 3.2.0-52.78 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-52-generic 3.2.0-52.78 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-3.2.0-54 3.2.0-54.82 Header files related to Linux kernel version 3.2.0 iU linux-headers-3.2.0-54-generic 3.2.0-54.82 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-generic 3.2.0.54.64 Generic Linux kernel headers iU linux-headers-server 3.2.0.54.64 Linux kernel headers on Server Equipment. un linux-image <none> (no description available) un linux-image-3.0 <none> (no description available) ii linux-image-3.2.0-44-generic 3.2.0-44.69 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-45-generic 3.2.0-45.70 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-48-generic 3.2.0-48.74 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-51-generic 3.2.0-51.77 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-52-generic 3.2.0-52.78 Linux kernel image for version 3.2.0 on 64 bit x86 SMP in linux-image-3.2.0-54-generic <none> (no description available) iU linux-image-generic 3.2.0.51.61 Generic Linux kernel image iU linux-image-server 3.2.0.51.61 Linux kernel image on Server Equipment. un linux-initramfs-tool <none> (no description available) un linux-kernel-headers <none> (no description available) un linux-kernel-log-daemon <none> (no description available) ii linux-libc-dev 3.2.0-52.78 Linux Kernel Headers for development un linux-restricted-common <none> (no description available) iU linux-server 3.2.0.51.61 Complete Linux kernel on Server Equipment. un linux-source-3.2.0 <none> (no description available) un linux-tools <none> (no description available) Output of du -sh /boot/*: root@hb2088:~# du -sh /boot/* 781K /boot/abi-3.2.0-44-generic 781K /boot/abi-3.2.0-45-generic 781K /boot/abi-3.2.0-48-generic 781K /boot/abi-3.2.0-51-generic 781K /boot/abi-3.2.0-52-generic 139K /boot/config-3.2.0-44-generic 139K /boot/config-3.2.0-45-generic 139K /boot/config-3.2.0-48-generic 139K /boot/config-3.2.0-51-generic 139K /boot/config-3.2.0-52-generic 1.6M /boot/grub 14M /boot/initrd.img-3.2.0-44-generic 14M /boot/initrd.img-3.2.0-45-generic 14M /boot/initrd.img-3.2.0-48-generic 12K /boot/lost+found 174K /boot/memtest86+.bin 176K /boot/memtest86+_multiboot.bin 2.8M /boot/System.map-3.2.0-44-generic 2.8M /boot/System.map-3.2.0-45-generic 2.8M /boot/System.map-3.2.0-48-generic 2.8M /boot/System.map-3.2.0-51-generic 2.8M /boot/System.map-3.2.0-52-generic 4.8M /boot/vmlinuz-3.2.0-44-generic 4.8M /boot/vmlinuz-3.2.0-45-generic 4.8M /boot/vmlinuz-3.2.0-48-generic 4.8M /boot/vmlinuz-3.2.0-51-generic 4.8M /boot/vmlinuz-3.2.0-52-generic

Search Results

Search found 18662 results on 747 pages for 'third party tools'.

Page 695/747 | < Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702 | Next Page >

- by Matthew Guay

- by [email protected]

- by Applications User Experience

- by Jon Galloway

- by AjarnMark

- by Rick Finley

- by Shane

- by sathya

- by MarkPearl

- by me

- by Elton Stoneman

- by hajan

- by PointsToShare

- by Natalia Rachelson

- by Brian

- by Kavitha

- by Shawn Cicoria

- by Steve Wilkes

- by Dave Campbell

- by user1898041

- by RoyOsherove

- by Trevor Bekolay

- by uvasal

< Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702 | Next Page >