display none - Page 698

Experience with AMCC 3ware 9650se raid cards? Ours seems dead

- by antiduh

We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated. Edit: These are the kernel errors we see: 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. 3w-9xxx 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 3w-9xxx 0000:09:00.0: setting latency timer to 64 3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing. 3w-9xxx: scsi0: ERROR: (0x06:0x001F): Microcontroller not ready during reset sequence. 3w-9xxx: scsi0: ERROR: (0x06:0x0036): Response queue (large) empty failed during reset sequence. 3w-9xxx 0000:09:00.0: PCI INT A disabled

Read the article

Howo to get Multipath IO with Dell MD3600i into active/active setup?

- by Disco

I'm desperately trying to improve performance of my SAN connection. Here's what i have: [root@xnode1 dell]# multipath -ll mpath1 (36d4ae520009bd7cc0000030e4fe8230b) dm-2 DELL,MD36xxi [size=5.5T][features=3 queue_if_no_path pg_init_retries 50][hwhandler=1 rdac][rw] \_ round-robin 0 [prio=200][active] \_ 18:0:0:0 sdb 8:16 [active][ready] \_ 19:0:0:0 sdd 8:48 [active][ghost] \_ 20:0:0:0 sdf 8:80 [active][ghost] \_ 21:0:0:0 sdh 8:112 [active][ready] And multipath.conf : defaults { udev_dir /dev polling_interval 5 prio_callout none rr_min_io 100 max_fds 8192 user_friendly_names yes path_grouping_policy multibus default_features "1 fail_if_no_path" } blacklist { device { vendor "*" product "Universal Xport" } } devices { device { vendor "DELL" product "MD36xxi" path_checker rdac path_selector "round-robin 0" hardware_handler "1 rdac" failback immediate features "2 pg_init_retries 50" no_path_retry 30 rr_min_io 100 prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } And sessions. [root@xnode1 dell]# iscsiadm -m session tcp: [13] 10.0.51.220:3260,1 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [14] 10.0.50.221:3260,2 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [15] 10.0.51.221:3260,2 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [16] 10.0.50.220:3260,1 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c I'm getting very poor read performance : dd if=/dev/mapper/mpath1 of=/dev/null bs=1M count=1000 The SAN is configured as follows: CTRL0,PORT0 : 10.0.50.220 CTRL0,PORT1 : 10.0.50.221 CTRL1,PORT0 : 10.0.51.220 CTRL1,PORT1 : 10.0.51.221 And on the host : IF0 : 10.0.50.1 IF1 : 10.0.51.1 (Dual 10GbE Ethernet Card Intel DA2) It's connected to a 10gbE switch dedicated for SAN traffic. My questions being; why the connection is set up as 'ghost' and not 'ready' like an active/active configuration ?

Read the article

Postfix character encoding?

- by Anonymous12345

I use Postfix as a mailserver. I have Ubuntu OS. Then I use PHP to send emails. Problem is that none of my emails are encoded properly by a mailsoftware which my VPS provider uses. According to them, the problem lies with me. It is only the name field which isn't encoded properly. For example "Björn" becomes "BjÃ¶rn" in my emails. However, when I echo the $name, it outputs "Björn" which is correct. Also, gmail and hotmail does show it correctly. The strange part is that the "text" (the message itself) is encoded properly. I use the following for sending mail: $headers="MIME-Version: 1.0"."\n"; $headers.="Content-type: text/plain; charset=UTF-8"."\n"; $headers.="From: $name <$email>"."\n"; $name= iconv(mb_detect_encoding($name), "UTF-8//IGNORE//TRANSLIT", $name); //// I HAVE TRIED WITH AND WITHOUT THE LINE ABOVE, NO DIFFERENCE mail($to, '=?UTF-8?B?'.base64_encode($subject).'?=', $text, $headers, '[email protected]'); I have tried with and without the iconv line also, no luck. The last thing I can think of is POSTFIX, could there be a setting for character encoding there? Anybody knows?

Read the article

Looking for updated BIOS for '99 Gateway in order to format/recognize >127 GB HD

- by Jeff

I have a '99 Gateway that's apparently too old for even Gateway to acknowledge it exists. Want to use it as a media hub and put in a 320GB HD, but it will not format above 127GB even running Win XP SP3. Read somewhere that upgrading the BIOS may do the trick, but I can't find the correct BIOS, and GW has been no help. Hoping I can just upgrade the BIOS, which is 11 years old. Any help would be much appreciated! I don't know where to look, and searches have been fruitless. System info: OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600 OS Manufacturer Microsoft Corporation System Name xxxx System Manufacturer Gateway System Model TABOR_II System Type X86-based PC Processor x86 Family 6 Model 7 Stepping 3 GenuineIntel ~596 Mhz BIOS Version/Date Intel Corp. 4W4SB0X0.15A.0015.P10, 9/28/1999 SMBIOS Version 2.1 BIOS info (from a free app I located): BIOS Type: Phoenix BIOS Date: September 28th 1999 BIOS ID: 4W4SB0X0.15A.0015.P10.9909281445-None BIOS OEM: 4W4SB0X0.15A.0015.P10 Chipset: Intel 440BX/ZX rev 3 SuperIO: SMC 70x or 80x rev 0 at port 0370 Manufacturer: Gateway Motherboard: WS440BX

Read the article

client flips between internal and external IP addresses??

- by jmiller-miramontes

I have what seems like a not-particularly-complicated home network, all things considered: a DSL line comes in to a modem/router, which goes off to a switch, which supports a bunch of machines. My machines live in a 192.168.0.x address space; however, I'm running some public servers on the network, so I have a block of 8 (5, really) static IP addresses that are mapped to the servers by the router. The non-servers get 192.168.0.x addresses via NAT; some machines have static addresses and some get addresses from DHCP. Locally, I'm running a DNS server (named) to map between the domain names and the 192.168 address space. Somewhat messy, but everything basically works. Except: One of my local non-server clients occasionally switches from its internal address to its external address. That is, if I check the logs of a website I'm running internally, the hits coming from this client sometimes show up with the internal 192.168 address, and sometimes with the external (216.103...) address. It will flip back and forth for no apparent reason, without my doing anything. This can be a problem in terms of how the clients interact with the way I have some of the clients' SSH systems configured (e.g., allowing access from the internal network but not the external network), but it also Just Seems Wrong. I will confess that I'm kinda skating on the very edge of my networking competence here, but I can't for the life of me figure out what's going on. If it helps, the client in question is running Mac OS X / 10.6; its address is statically assigned, is not one of the five externally-accessible addresses, and gets its DNS from (first) the internal DNS server and (second) my ISP's DNS servers. I can't swear that none of the other NAT clients are also showing this problem; the one I'm dealing with is my everyday machine, so this is where I run into it. Does anybody out there have any advice? This is driving me crazy...

Read the article

SQL Server 2005 Express: upgrading to SP3 in mixed-mode installations

- by Jeroen Pluimers

I'm having trouble upgrading SQL Server 2005 Express SP1 to SP3. The SP1 install uses mixed mode authentication (so there is an sa password). This is the message I get: TITLE: Microsoft SQL Server Setup ------------------------------ None of the selected features can be installed or upgraded. Setup cannot proceed since no effective change is being made to the machine. To continue, click Back and then select features to install. To exit SQL Server Setup, click Cancel. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.4035.00&EvtSrc=setup.rll&EvtID=SQLSetup90&EvtType=28108 ------------------------------ BUTTONS: OK ------------------------------ The link then tells me To continue you must provide a strong sa password. I tried some searching, and found something about BPAClient.dll, but this batch-file does not fix it: mkdir "%ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\BPA\BPAClient" copy "%ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\BPA\bin\BPAClient.dll" "%ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\BPA\BPAClient\" So I think the clue is the strong in the link above. Am I on the right track? Where do I find more information on the strongness of an sa password? --jeroen (who will adjust the question when he has dug further)

Read the article

My hard drive seems to be overheating... what should I do?

- by George Edison

After a cold boot, the hard drive in my notebook jumps to 56? within an hour or so of idling. Is 56? a cause for alarm? Notes: The notebook is on a flat desk and none of the vents are obstructed. The video card is currently at 55? and the CPU at 50?. It's a Western Digital 250GB hard drive. SMART reports the drive healthy but does warn that: Edit: this problem had a very surprise ending. I inverted the notebook and unscrewed some of the panels on the back (there was one covering the hard drive, and one that provided access to the memory). I couldn't see any dust, so I simply screwed everything back together and powered it on... and it worked! The temperature is now staying at 46?, and it feels notable cooler to the touch. So I can only assume that some internal fan was malfunctioning or something. Whatever the case, it's working now so I won't complain. Edit: I have an SSD now, so temperature isn't as big an issue as it was when I had a mechanical drive.

Read the article

Ubuntu raid 1 write errors

- by Micah

I have an Ubuntu server set up with two SATA drives in a RAID 1 configuration with MDADM. The machine is used to record raw video, which involves a lot of writing to the disk. Sometimes during video recording the computer will crash, will the following errors in kern.log: Mar 15 10:39:41 video kernel: [414501.629864] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 Mar 15 10:39:41 video kernel: [414501.629870] ata2.00: BMDMA stat 0x26 Mar 15 10:39:41 video kernel: [414501.629875] ata2.00: SError: { UnrecovData Handshk } Mar 15 10:39:41 video kernel: [414501.629880] ata2.00: failed command: WRITE DMA EXT Mar 15 10:39:41 video kernel: [414501.629889] ata2.00: cmd 35/00:00:28:6d:f6/00:04:06:00:00/e0 tag 0 dma 524288 out Mar 15 10:39:41 video kernel: [414501.629891] res 51/84:b1:77:6e:f6/84:02:06:00:00/e0 Emask 0x30 (host bus error) Mar 15 10:39:41 video kernel: [414501.629896] ata2.00: status: { DRDY ERR } Mar 15 10:39:41 video kernel: [414501.629899] ata2.00: error: { ICRC ABRT } Mar 15 10:39:41 video kernel: [414501.629910] ata2.00: hard resetting link Mar 15 10:39:41 video kernel: [414501.973009] ata2.01: hard resetting link Mar 15 10:39:41 video kernel: [414502.482642] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 15 10:39:41 video kernel: [414502.482658] ata2.01: SATA link down (SStatus 0 SControl 300) Mar 15 10:39:41 video kernel: [414502.546160] ata2.00: configured for UDMA/133 Mar 15 10:39:41 video kernel: [414502.546203] ata2: EH complete Is this the result of faulty drives? Is software RAID just not performant enough for data rates ~15 MB/s, even with a quad-core i7? Thanks for your help. Edit: cat /proc/mdstat returns this: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdb1[1] sda1[0] 976760768 blocks [2/2] [UU] unused devices: <none>

Read the article

Why is my own e-mail address not listed in the To field?

- by Sammy

I have received a suspicious e-mail. I am not affiliated with the company mentioned in the e-mail body, or the signer. However, I have been using the app they mention in the e-mail. They are inviting me to a Beta test. But the e-mail is not by the original author of the app. But I'm thinking they might have hired an external company to do this version of the app. There is a link to a TestFlight page. So I'm not sure what to make of this. Now this is what mainly arose my attention. From: Anders Bergman <[email protected]> To: Bon Support Cc: Subject: Test av nya BBK för Android This is how it shows up in Outlook 2010. The "To" field is addressed to "Bon Support" and when I double-click on that I see [email protected]. I can assure you that none of these are my e-mail addresses. So where the heck is my own e-mail address? How could I have received this if it was addressed to someone else? If not spammers and skimmers and other criminals, who else is using this practice and why? And how can I tell now to what e-mail account I received this? I have more than one account set up in Outlook.

Read the article

Wifi Drops Connections with WPA2-PSK

- by graf_ignotiev

I run a small computer lab made up of 10 computers of identical hardware and software (Dell Latitudes with Windows 7 x64 Enterprise) and I use a ZyWALL 2WG as a router/firewall. Nine of the computers connect to the router over wifi using WPA2-PSK encryption while the last one is connected by ethernet cable. I'm having a problem where any computer connected to the wi-fi occasionally drops off the network (it cannot be pinged and the client cannot ping the gateway). It only happens on the wifi side and only when the encryption is WPA2-PSK or WPA-PSK. I tried using another router with a different make and model and had no problems. Thinking it could be a software error, I reset the router to factory defaults and installed the newest firmware (V4.04(AQI.8) | 04/09/2010), but still have the problem. The 802.1X log gives the following error User logout because of user disassociation. with this note WPA2-PSK:00242c582ece:logout where 00242c582ece is the mac address of the device. At this point I'm out of things to try and leads to follow. It looks like this user had the same or similar problem, but none of those proposed solutions work for me.

Read the article

VMware vSphere Hypervisor 5 with Intel SPL 5000 in Raid 0 no boot from DVD?

- by Richard

I hope this is the correct StackExchange, since I am only using StackOverflow for Web development, but need some help with my server configuration. I would like to install VMware vSphere Hypervisor 5 on my server here at home and run a view machines on it such as Windows Server 2008 and Red Hat. I used to have either OpenSuse or Windows Server 2008 installed but I would like to get into VMWare Hypervisor. My hardware configuration: - Intel S5000PSL with bios version S5000.86B.10.60.0091 build date 10/09/2008 as of read out of bios - E5420 @ 2.5GHz Intel Xeon CPU The Intel Virtualization Technology is enabled in the BIOS - DVD DH20A4P DVD Writer - 8GB ECC Ram I have configured a RAID 0 on my 2 WD 2TB SATA drives I have burned the Hypervisor 5 on an empty DVD and it is bootable, I tested it on my client PC. The main problem here is basically, that I cannot boot the DVD on my server. I have set the Boot Option to the DVD drive. I have booted from the BIOS straight in the DVD drive and it does not work. I do not see any error messages. The only thing I see are the PXE error messages when it tries booting from the network and other devices, obviously without any result. Does anybody know why I cannot boot the DVD? What could cause the problem? I have sucessfully installed Windows Server 2008 via original DVD about 1 year ago, so the DVD drive can read and does work. The DVD drive is available in the BIOS and I have checked all cables and none of them is loose in any way. I even see the light flashing but it does not want to boot from the DVD. I am looking forward to suggestions and things that I should check. Thank you very much

Read the article

Limit Apache 2 Memory Usage

- by UltraNurd

I am running a hobby webserver off of an ancient Blue & White G3/300 running Debian PPC Squeeze 2.6.30. The performance is okay for a while after a restart, but it eventually gets more and more bogged down. Right now it's at 76 days uptime, and the main culprit seems to be the memory usage of 10+ apache2 processes. I think I need to lower the values for StartServers, MinSpareServers, and/or MaxSpareServers, but I'm not sure which one to adjust, and there are three sections for each depending on which mpm module is in use. How do I tell which of the following sections I need to change, and what are some reasonable values given that the box has 448 MB physical memory (weird upgrade history of one each 64, 128, and 256 sticks)? <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> There aren't any other instances of StartServers in my apache2.conf, but none of those mpm modules appear in mods-available or mods-enabled. Ideas? Thanks!

Read the article

Control Panel for MySQL and PostgreSQL server

- by jfreak53

I am looking for a control panel for a CentOS system that will allow me to add user's that can control their "own" MySQL and PostgreSQL Databases. I don't want to have to spend the $25 a month for cpanel on a dedicated to do this. Plus cPanel comes with all the rest like webserver and email that I don't need these to have. Basically I want to be able to create users that can create their own databases and only see those that they have created. I want to be able to control their disk space as with most panels. They need to be able to create their own DB users as well. Kloxo won't work as it doesn't natively support PostgreSQL. I tried straight PHPMyAdmin, but it won't let the user's create their own DB's unless they can also see everyone else's. VirtualMin I just can't get to work at all! ha ha I installed it an though it works great for itself if a user signs into Usermin they can see all DB's. If they sign into PHPMyAdmin (which basically means any program that directly connects to MySQL) they see all DB's. If they login to virtualmin then yes, they only see their's. But that won't work. I can't seem to think of another way to do this. I can use webmin and usermin directly but PHPMyAdmin again let's the user's I create either see only one DB and create none, or see all DB's. So that sound's like a permission problem in MySQL and PostgreSQL.

Read the article

configuring vsftpd anonymous upload. Creates files but freezes at 0 bytes

- by Wayne

vsftpd on ubuntu after sudo apt-get install vsftpd Then did configuration as in the attached /etc/vsftpd.conf file. Anonymous ftp allows cd to the upload directly and allows put myfile.txt which gets created on the server but then the client hangs and never proceeds. The file on the server remains at 0 bytes. Here's the folders and permissions: root@support:/home/ftp# ls -ld . drwxr-xr-x 3 root root 4096 Jun 22 00:00 . root@support:/home/ftp# ls -ld pub drwxr-xr-x 3 root root 4096 Jun 21 23:59 pub root@support:/home/ftp# ls -ld pub/upload drwxr-xr-x 2 ftp ftp 4096 Jun 22 00:06 pub/upload root@support:/home/ftp# Here's the vsftpd.conf file: root@support:/home/ftp# grep -v '#' /etc/vsftpd.conf listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES dirmessage_enable=YES xferlog_enable=YES anon_root=/home/ftp/pub/ connect_from_port_20=YES chown_uploads=YES chown_username=ftp nopriv_user=ftp secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Here's a file example that attempted to upload: root@support:/home/ftp/pub/upload# ls -l total 0 -rw------- 1 ftp nogroup 0 Jun 22 00:06 build.out This is the client attempting to upload...it is frozen at this point: $ ftp 173.203.89.78 Connected to 173.203.89.78. 220 (vsFTPd 2.0.6) User (173.203.89.78:(none)): ftp 331 Please specify the password. Password: 230 Login successful. ftp> put build.out 200 PORT command successful. Consider using PASV. 553 Could not create file. ftp> cd upload 250 Directory successfully changed. ftp> put build.out 200 PORT command successful. Consider using PASV. 150 Ok to send data.

Read the article

mysqld causes high CPU load

- by Radu

Read the article

How to utilize 4TB HDD, which is showing up as 2.72TB

- by mason

I have two internal HDD's. They're both 4TB capacity. They're both formatted with the GPT partitioning scheme, and they're Basic Discs (not dynamic). I'm on Windows 8 64bit. I have UEFI, not BIOS. When I view the discs in Computer Management MMC with Disk Management, they show that each partition is formatted as NTFS and takes up the entire drive. And it shows that each drive has a capacity of 3725.90GB in the bottom section of Disk Management, but 2.794.39GB in the top section. When I view the discs in "My Computer"/"This PC" they only show up as 2.72TB, which matches the amount capacity I'm getting from some other 3TB HDD's I have. Why are they showing up as only 2.72GB? Will I be able to use the full 4TB capacity? Also of note, although I'm not sure it's relevant: I often get corrupted files on these two HDD's. None of my other HDD's give me corrupted files. Usually the problem is fixed by running chkdsk /f on the drives, but it's extremely annoying. In the picture below, it's the X: and Y: drives. Steps I've tried Flashed latest BIOS (MSI J.90 to K.30)

Read the article

WGet or cURL: Mirror Site from http://site.com And No Internal Access

- by alharaka

I have tried wget -m wget -r and a whole bunch of variations. I am getting some of the images on http://site.com, one of the scripts, and none of the CSS, even with the fscking -p parameter. The only HTML page is index.html and there are several more referenced, so I am at a loss. curlmirror.pl on the cURL developers website does not seem to get the job done either. Is there something I am missing? I have tried different levels of recursion with only this URL, but I get the feeling I am missing something. Long story short, some school allows its students to submit web projects, but they want to know how they can collect everything for the instructor who will grade it, instead of him going to all the externally hsoted sites. UPDATE: I think I figured out the issue. I though the links to the other pages were in the index.html page that downloaded. I was way off. Turns out the footer of the page, which has all the navigation links, is handled by a JavaScript file Include.js, which reads JLSSiteMap.js and some other JS files to do page navigation and the like. As a result, wget does not pick up an other dependencies because a lot of this crap is handled not on web pages. How can I handle such a website? This is one of several problem cases. I assume little can be done if wget cannot parse JavaScript.

Read the article

Browser sends http request with RANGE

- by nute

I have a local testing environment in a Fedora virtual machine. Strangely, resources (css and js files) don't seem to work. Looking at Firebug, I see that the browser sends the HTTP request with "Range bytes=0-". The server responds with either an empty 200OK or an empty 206 Partial Content. Here is an example: Response Headers Date Mon, 23 Nov 2009 23:33:26 GMT Server Apache/2.2.13 (Fedora) Last-Modified Thu, 19 Nov 2009 22:58:55 GMT Etag "18-3aec-478c14dbee138" Accept-Ranges bytes Content-Length 15084 Content-Range bytes 0-15083/15084 Connection close Content-Type text/css Request Headers Host fedora.test User-Agent Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.5) Gecko/20091105 Fedora/3.5.5-1.fc11 Firefox/3.5.5 Accept text/css,*/*;q=0.1 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 300 Connection keep-alive Referer http://fedora.test/pictures/ Cookie __utma=26341546.1613992749.1258504422.1258569125.1258752550.4; __utmz=26341546.1258504422.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); PHPSESSID=tqf8jfmc77qihe97rl4tmhq685 Range bytes=0- If-Range "18-3aec-478c14dbee138" I don't know if the browser is sending the wrong request, or if it's the server that is doing this. Request made to the outside (such as google analytics) are working fine. This is running in Fedora 11 in VirtualBox. Apache. PHP. The files are being served through the "shared folders" feature of VirtualBox (could it be related?). No error logs could help me.

Read the article

NFSv4 "Too many levels of symbolic links" error

- by user1434058

Both machines are running Ubuntu 12.04 Remote NFSv4 Client $ ls /mnt/storage/aaaaaaa_aaa/bbbb/cccc_ccccc gives this error: ls: reading directory .: Too many levels of symbolic links How can I fix this? When error occurs ls start listing the files, however PHP brakes. On the NFSv4 Server In /etc/fstab: /mnt/storage /srv/storage none bind 0 0 In /etc/exports /srv 192.168.1.0/24(rw,async,insecure,no_subtree_check,crossmnt,fsid=0,no_root_squash) /srv/storage 192.168.1.0/24(rw,async,nohide,insecure,no_subtree_check,no_root_squash) ERROR root@ds:root@ds:/mnt/storage/foreign_dbs/imdb/imdb_htmls# ls -l | head ls: reading directory .: Too many levels of symbolic links total 10302840 -rw-r--r-- 1 root root 10484 Jul 5 13:56 0019038.gz -rw-r--r-- 1 root root 16264 Mar 30 00:31 0259701.gz -rw-r--r-- 1 root root 13784 Mar 30 14:20 1000000.gz -rw-r--r-- 1 root root 12741 Mar 30 13:04 1000003.gz -rw-r--r-- 1 root root 12794 Mar 30 12:40 1000004.gz -rw-r--r-- 1 root root 13123 Mar 30 12:07 1000005.gz -rw-r--r-- 1 root root 13183 Mar 30 12:04 1000006.gz -rw-r--r-- 1 root root 13443 Jul 4 01:16 1000007.gz -rw-r--r-- 1 root root 12968 Mar 30 11:05 1000008.gz I came across it in PHP. scandir would return 1612577.gz & 1612579.gz, but skips 1612578.gz and yet the file types and properties are identical on them and this only happens on the nfs client, works 100% on the server

Read the article

keyboard intermittently stops working even after reinstalling windows 7; possibly a Chrome issue?

- by neverskipbreakfast

My keyboard intermittently stops working. Sometimes a couple of keys will work, but usually none. Sometimes if I mash the ctrl+alt+windows keys randomly for a bit, the keyboard will let me type one more letter before stopping again. Sometimes the keys will open a program menu but usually not. I have even completely wiped my machine and reinstalled windows 7; the problem continues. Specs: Intel iMac (early 2006, 2.0GHz, 2MB RAM, 240GB HD) running ONLY Windows 7 Professional, 32-bit (NOT through boot camp) and using a USB keyboard (Saitek Eclipse II.) Unplugging & reconnecting keyboard does NOT fix it. Connecting a different keyboard does NOT fix it. That one won't work, either. Drivers are up-to-date. Removing and reinstalling drivers does NOT fix it. Restarting the computer does NOT fix it. In fact, when the Windows logon screen appears the keyboard won't work and neither will the icon to pull up the on-screen keyboard. My mouse can click around just fine. I can only log onto a non-password protected account. Generally, logging into as different Windows user fixes it. I can then log back on to my main user account and continue work for a few hours until it happens again. Clearing my Chrome browsing data stopped the problem from recurring for a week or so. I have already REINSTALLED Windows 7 (not just a restore.) The problem returned after 2 days of use. I use Avira free antivirus software, and repeated scans turn up nothing fishy. I suspect it is related to something in Google Chrome because I used my google account to reload all my previous Chrome extensions, saved data, etc. (Chrome Extensions Installed: AdBlock, Better Google Tasks, DropBox, FB Photo Zoom, Google Mail Checker, StayFocusd.) Any ideas? Any at all?

Read the article

Migrating Windows XP BOOT.INI Settings to Windows 7 Boot-loader

- by Synetech inc.

Hi, Two months ago my motherboard died, so I bought a used computer that came with Windows 7. I have since installed my old hard-drive, which had Windows XP on it, in this system. What I am trying to do now is to figure out a way to migrate the settings from XP's BOOT.INI into 7's boot-loader. Below is the BOOT.INI I used in XP (I have reduced the strings and updated the disks to point to the new location of the old HD. Oh and I am not clear on the drive letters. In XP, I could boot the recovery console or MS-DOS from a file in C:\ that contains the boot-sector. I am not sure what drive letter it would be called now—I had to manually change all the drive letters of the old partitions in Windows 7 because it auto-assigned them all wrong/differently). [boot loader] timeout=10 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP (Safe)" /safeboot:network /sos /bootlog /noguiboot C:\CMDCONS\BOOTSECT.DAT="Recovery Console" /cmdcons C:\BOOTSECT.DOS="MS-DOS 7.10" /win95 I have looked around, and have only been able to find some bcdedit commands to add XP to the boot-loader, but none that include information on setting safe-mode for it (or changing any of the XP load options for that matter). Not surprisingly I suppose, I have not found anything on adding the XP recovery console or DOS to the Windows 7 boot-loader. (Yes, I tried EasyBCD, but that did not help; it had no options for XP, and the best I managed was to get a choice of booting 7 or normal-mode XP—choosing XP didn't even give the old XP boot menu.) Can anyone please tell me how to export the entries in XP's boot.ini to 7's boot-loader so that on boot, I can choose to load the following: Windows 7 Windows 7 (Safe-mode) (Windows 7 (The Win7 counterpart of the Recovery Console)) Windows XP Windows XP (Safe-mode) Windows XP (Recovery Console) MS-DOS 7.10

Read the article

Automatically install driver on headless WHSv1 system

- by Dan Neely

I have one of the HP Mediasmart Windows Home Server v1 boxes. It's network port appears to have died a few days ago but the system is not giving any other sign of failure: No activity lights activate on either side of the cable when connected to my gigabit switch; when connected to one of my routers 100 megabit ports the lights turn on but it remains unreachable over the network and my router never lists it as among DHCP clients. I bought a USB-ethernet adapter to temporarily get it back online; but the adapter needs a driver to work which I can't install because the system is headless by design (no video out, no PCI/PCIe slots) with admin access only available via the WHS client or remote desktop. Both of those options require network connectivity and are consequently unavailable. I tried copying the drivers to a flash drive; but Windows either didn't look there or none of the drivers provided were suitable (Win8, Win7, or combined XP and Vista). I've been told that a USB WiFi adapter would have the same driver problem.

Read the article

How to configure Apache to let PHP handle OPTIONS HTTP requests?

- by Robin Berjon

In order to set up a proper test suite for CORS (cross-domain requests) I need to be able to handle the HTTP OPTIONS method directly from script. I therefore have a simple PHP script that detects the OPTIONS method, and reacts accordingly by outputting some specific headers. The PHP side is not a problem. If I use curl to issue GET/POST/HEAD/PUT/etc. requests they all go to the script and it clearly handles them fine. If I issue an OPTIONS request however, it never reaches the script: Apache immediately replies listing a set of methods that it believes to be appropriate for this resource. I can tell that the script isn't run (no logging, none of its output makes it to the response, etc.). I've been going through the Apache configuration, have made sure no applicable .htaccess is in the way, I've tweaked a bunch of things such as Limit/LimitExcept directives, but I can't get it to change its behaviour. I've also tried to find information on a technique from my youth that could have helped here: NPH (non-parsed headers) scripts; but apparently that has now disappeared (at least, I can't find any recent information about it that works). So the question is: how do I tweak Apache's configuration so that it will let my script handle OPTIONS?

Read the article

Configuring suExec to work with Apache and PHP via FastCGI

- by RandomPsychology

I have installed ISPConfig 3 on an Ubuntu VPS and configured it for Apache + PHP via FastCGI and suexec. I am able to upload PHP apps (e.g. Wordpress) and run them normally w/ suexec. However, for some reason the PHP scripts cannot write data to disk. For instance, trying to upgrade a plugin via Wordpress' web interface causes it to fail with the error "Could not create directory /path/to/wp-content/upgrade/plugin.tmp." Trying to upload media and other assets also fails via the web. I've checked owner/group on the directory structure and it looks good. The suExec log also seems to be normal and I don't see any indicative errors in the web server logs. I can also confirm that changing the owner/group on the directories does result in the expected error in suexec.log. Additionally, I have the directory permissions set to u=rw,g=r,o= and I've also tried setting g=rw. None of this results in my scripts being able to write to the directories. What am I doing wrong?

Read the article

New Computer freezing up at random

- by Benjamin Frost

Since I built my system about 4 weeks ago I'v been getting random freezes, Sometimes it can happen directly after startup and sometimes it wont freeze up for 3-4 days of 24/7 running. It seems to be happening under all stress loads but mainly when the CPU is under 10% load. It doesn't give me a BSOD or anything, it simply just freezes and repeats the last sound before the freeze until I shut it down by the power button. I'v re-seated everything in the system except the CPU, Cleaned the RAM sockets and gold fittings. None of the components have been clocked above their factory settings as of yet, don't want to overclock them until I sort out these freezes. Temps are all well under the rated max temps, the highest the temps have been are below CPU: Low load: 16-21°C Full Load (100%) 40-43°C *(From HWMonitor by CPUID) GPU 1: Low Load: 25-30°C Full Load (100%): 45-50°C GPU 2: Low Load: 23-27°C Full Load (100%): 45-50°C *(GPU Temps from Catalyst Control Center) General Case temps Rear: 18-20°C Mid: 20-21°C Front (HDD/SSD Bays): 14-19°C (Case temps may be a little off as it's from the Kaze master pro fan controller) I have Un-installed EVERY driver for Motherboard, GPU & Soundcard and Re-installed twice. Windows is all up to date. To date i'v tried the following Running Memtest for 24 hrs straight, No errors Running Memtest on each individual RAM modules, No errors Reseated everything except the CPU Cleaned DIMM Sockets and Gold inputs Tested the Graphics cards 1 at a time Re-arranged all the SATA devices to run on Chipset controlled ports Re-installing all drivers OS: Win7 Professional 64bit Motherboard: ASRock X79 Extreme9 CPU: i7 3930k 3.2GHz GPU: Sapphire 7950 OC Edition V2 (2 card Crossfire) RAM: G.Skill Ripjaws Z F3-17000CL11Q-16GBZL 16GB (4x4GB) DDR3 Boot Drive: OCZ Agility 4 128GB Data Drive 1: Western Digital Black 2TB Data Drive 2: Western Digital Black 2TB Data Drive 3: Western Digital Green 3TB Power Supply: Corsair AX1200 Gold

Search Results

Search found 27682 results on 1108 pages for 'display none'.

Page 698/1108 | < Previous Page | 694 695 696 697 698 699 700 701 702 703 704 705 | Next Page >

- by antiduh

- by Disco

- by Anonymous12345

- by Jeff

- by jmiller-miramontes

- by Jeroen Pluimers

- by George Edison

- by Micah

- by Sammy

- by graf_ignotiev

- by Richard

- by UltraNurd

- by jfreak53

- by Wayne

- by Radu

- by mason

- by alharaka

- by nute

- by user1434058

- by neverskipbreakfast

- by Synetech inc.

- by Dan Neely

- by Robin Berjon

- by RandomPsychology

- by Benjamin Frost

< Previous Page | 694 695 696 697 698 699 700 701 702 703 704 705 | Next Page >