Search Results

Search found 11155 results on 447 pages for 'disk sleep'.

Page 70/447 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• NULL pointer dereference in swiotlb_unmap_sg_attrs() on disk IO

  - by Inductiveload

  I'm getting an error I really don't understand when reading or writing files using a PCIe block device driver. I seem to be hitting an issue in swiotlb_unmap_sg_attrs(), which appears to be doing a NULL dereference of the sg pointer, but I don't know where this is coming from, as the only scatterlist I use myself is allocated as part of the device info structure and persists as long as the driver does. There is a stacktrace to go with the problem. It tends to vary a bit in exact details, but it always crashes in swiotlb_unmap_sq_attrs(). I think it's likely I have a locking issue, as I am not sure how to handle the locks around the IO functions. The lock is already held when the request function is called, I release it before the IO functions themselves are called, as they need an (MSI) IRQ to complete. The IRQ handler updates a "status" value, which the IO function is waiting for. When the IO function returns, I then take the lock back up and return to request queue handling. The crash happens in blk_fetch_request() during the following: if (!__blk_end_request(req, res, bytes)){ printk(KERN_ERR "%s next request\n", DRIVER_NAME); req = blk_fetch_request(q); } else { printk(KERN_ERR "%s same request\n", DRIVER_NAME); } where bytes is updated by the request handler to be the total length of IO (summed length of each scatter-gather segment).

  Read the article

• Best data recovery tools?

  - by Nonick

  So due to a recent act of stupidity and bravado, I uttered the words "backups! who needs backups?!" and what followed was the tragic loss of 260gb of data. This scenario in particular is requiring me to recover a repartitioned hard disk, but I was wondering what tools people here use in general to recover lost data. I'm sure everyone has been there, either accidentally rewriting files, resaving an old version, computer crash, hard disk death, user deletes an important document etc. So was thinking it might be an interesting point of discussion as to what you guys use to recover lost data. I appologise if this is considered irrelevant, but considering there has been a few recovery questions, I think this might be interesting.

  Read the article

• How to partition Seagate FreeAgent GoFlex 2TB hard disk?

  - by balki

  Hi I bought a new Seagate 2TB external hard disk. I opened the drive's application in my virtual windows, did product registration using the application present in it. I have few questions on how best to use it. The drive by default has some files and folders - setup.exe, System Volume Information, USB 3.0 PC Card Adapter etc,. I copied all the files to my laptop. Is it safe to delete these files? It has a dash board for windows which allows to tune power options, test the drive etc. Will I be able to use the dash board if I put back all these files and mount on windows again? I want to partition and format the hard disk. Data I like to store is Around 10 to 20 GB Files - Virtual box images. Around 4GB Files - Dvd images. Other Movies and personal Files. What is the best filesystem to store very huge files like 10 to 20GB files. So that they are written and accessed fast also best uses the drive's capacity. If I leave one of the partition as ntfs and others to different files systems, will it be able to mount on windows and Will I be able to use the device's dash board? Note: I dont need any encryption for my data. Any other advice on using the hard disk is also welcome.

  Read the article

• Wireless (Broadcom) just stopped working after putting machine to sleep!

  - by tommed

  Had the wireless working on my Dell Studio 15 for months now (Ubuntu 10.04 64bit, now 10.10 64bit). But I shut the lid this morning, which put the machine to sleep; when I openend it again the wireless would no longer connect to anything :'( I rebooted the machine, but that didn't help. I then did ifconfig eth1 {down,up}, but that didn't help, then I did iwconfig eth1 power {down,on}, but that didn't work. So I uninstalled the wireless driver (Broadcom STA) from additional drivers (reboot in the middle), but it still won't work anymore!! This is the trace from daemon.log, looks like it is a driver issue? Nov 28 12:26:39 ulap NetworkManager[1218]: (eth1): supplicant connection state: disconnected - scanning Nov 28 12:26:39 ulap NetworkManager[1218]: (eth1): supplicant connection state: scanning - disconnected Nov 28 12:26:45 ulap NetworkManager[1218]: (eth1): supplicant connection state: disconnected - scanning Nov 28 12:26:50 ulap wpa_supplicant[1295]: Trying to associate with MY_MAC_CODE (SSID='MY_WIRESS_SSID' freq=2417 MHz) Nov 28 12:26:50 ulap wpa_supplicant[1295]: Association request to the driver failed Nov 28 12:26:50 ulap NetworkManager[1218]: (eth1): supplicant connection state: scanning - associating Nov 28 12:26:51 ulap wpa_supplicant[1295]: Associated with MY_MAC_CODE Nov 28 12:26:51 ulap NetworkManager[1218]: (eth1): supplicant connection state: associating - associated Nov 28 12:27:01 ulap wpa_supplicant[1295]: Authentication with MY_MAC_CODE timed out. Nov 28 12:27:01 ulap NetworkManager[1218]: (eth1): supplicant connection state: associated - disconnected Anyone seen this, or know how I can get around this issue? It had been working fine up until now?! Even ran update-manager, but there wasn't any changes to the wireless drivers (or any related networking areas). Running the most up-to-date version of 10.10 x64. My android phone and other devices are still working on the wireless.

  Read the article

• Package upgrade on Ubuntu raid server and grub setup issue

  - by RecNes

  I have remote Ubuntu 10.10 server running on raid system. I did package upgrade yesterday night for security reasons. During the upgrade, grub installation screen appeared and asked me which partition I wanted to install grub. Options are sda,sdb,md1 and md2. I decide to install them on both sda and sdb partitions. I wondering, was I make true decision? If machine get reboot is it can be boot up safely? You can find fdisk output and fstab mount points below: Fstab: proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md0 none swap sw 0 0 /dev/md1 /boot ext3 defaults 0 0 /dev/md2 / ext3 defaults 0 0 Fdisk: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00029bb5 Device Boot Start End Blocks Id System /dev/sda1 1 262 2102562 fd Linux raid autodetect /dev/sda2 263 295 265072+ fd Linux raid autodetect /dev/sda3 296 91201 730202445 fd Linux raid autodetect Disk /dev/md0: 2152 MB, 2152923136 bytes 2 heads, 4 sectors/track, 525616 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Disk /dev/md1: 271 MB, 271319040 bytes 2 heads, 4 sectors/track, 66240 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table Disk /dev/md2: 747.7 GB, 747727224832 bytes 2 heads, 4 sectors/track, 182550592 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00088969 Device Boot Start End Blocks Id System /dev/sdb1 1 262 2102562 fd Linux raid autodetect /dev/sdb2 263 295 265072+ fd Linux raid autodetect /dev/sdb3 296 91201 730202445 fd Linux raid autodetect

  Read the article

• Should I use "Raid 5 + spare" or "Raid 6"?

  - by Trevor Boyd Smith

  What is "Raid 5 + Spare" (excerpt from User Manual, Sect 4.17.2, P.54): RAID5+Spare: RAID 5+Spare is a RAID 5 array in which one disk is used as spare to rebuild the system as soon as a disk fails (Fig. 79). At least four disks are required. If one physical disk fails, the data remains available because it is read from the parity blocks. Data from a failed disk is rebuilt onto the hot spare disk. When a failed disk is replaced, the replacement becomes the new hot spare. No data is lost in the case of a single disk failure, but if a second disk fails before the system can rebuild data to the hot spare, all data in the array will be lost. What is "Raid 6" (excerpt from User Manual, Sect 4.17.2, P.54): RAID6: In RAID 6, data is striped across all disks (minimum of four) and a two parity blocks for each data block (p and q in Fig. 80) is written on the same stripe. If one physical disk fails, the data from the failed disk can be rebuilt onto a replacement disk. This Raid mode can support up to two disk failures with no data loss. RAID 6 provides for faster rebuilding of data from a failed disk. Both "Raid 5 + spare" and "Raid 6" are SO similar ... I can't tell the difference. When would "Raid 5 + Spare" be optimal? And when would "Raid 6" be optimal"? The manual dumbs down the different raid with 5 star ratings. "Raid 5 + Spare" only gets 4 stars but "Raid 6" gets 5 stars. If I were to blindly trust the manual I would conclude that "Raid 6" is always better. Is "Raid 6" always better?

  Read the article

• PHP execute command as subcommand

  - by Thomaschaaf

  I have the following 2 files and am executing them on linux (debian). File1.php <?php exec("php -f file2.php > /dev/null 2>&1 &"); sleep(100); File2.php <?php exec("sleep 30 > /dev/null 2>&1 &"); exec("sleep 30 > /dev/null 2>&1 &"); sleep(100); The way it currently is it first starts file1.php and fires up file2.php and immediatly begins the sleep commands. It does not wait for the first sleep to finish to continue. The problem is that the file2.php and sleep commands are not subcommands of file1.php and I can't simply kill it to kill all subcommands. My htop looks like this: http://dl.getdropbox.com/u/5910/Jing/2011-01-13_1611.png I am searching for a way to have the commands be subcommands of file1.php so that I can easily kill them all :) what I have: '- php -f file2.php '-sleep 30 '-sleep 30 '- php -f file1.php basically I want this: '- php -f file1.php '- php -f file2.php '-sleep 30 '-sleep 30

  Read the article

• How to re-enable the idle timer in ios once it has been disabled (to allow the display to sleep again)?

  - by lindon fox

  I have figured out how to stop an iOS device from going to sleep (see below), but I am having troubles undoing that setting. According to the Apple Documentation, it should just be changing the value of the idleTimerDisabled property. But when I test this, it does not work. This is how I am initially stopping the device from going to sleep: //need to switch off and on for it to work initially [UIApplication sharedApplication].idleTimerDisabled = NO; [UIApplication sharedApplication].idleTimerDisabled = YES; I would have thought that the following would do the trick: [UIApplication sharedApplication].idleTimerDisabled = NO; From the Apple Documentation: The default value of this property is NO. When most applications have no touches as user input for a short period, the system puts the device into a "sleep” state where the screen dims. This is done for the purposes of conserving power. However, applications that don't have user input except for the accelerometer—games, for instance—can, by setting this property to YES, disable the “idle timer” to avert system sleep. Important: You should set this property only if necessary and should be sure to reset it to NO when the need no longer exists. Most applications should let the system turn off the screen when the idle timer elapses. This includes audio applications. With appropriate use of Audio Session Services, playback and recording proceed uninterrupted when the screen turns off. The only applications that should disable the idle timer are mapping applications, games, or similar programs with sporadic user interaction. Has anyone come across this problem? I am testing on iOS6 and iOS5. Thanks in advance.

  Read the article

• Why does OS X insist on spinning up all external drives when loading a file from the local drive?

  - by Phillip Oldham

  Why does OS X insist on spinning up all the attached external drives (firewire, usb) when loading a file from the local (internal) drive? It's driving me insane that I have to wait for 3 attached drives (1 back-up, 2 media) to spin up -- a total of 20s -- to access a file that is located only on my local/internal drive. There is no obvious need to access the other drives; nothing is being read from them and nothing need be written. Examples: Quicktime X opening a file from the local HDD. Starting Caffeine, an app which doesn't access any other files at all. Can I tell OS X to only spin those drives up when actually accessing them?

  Read the article

• How to prevent screen locking when lid is closed?

  - by Joe Casadonte

  I have Ubuntu 11.10 with Gnome 3 (no Unity), gnome-screen-saver has been removed and replaced with xscreensaver. The screensaver stuff all works fine -- no complaints there. When I close my laptop lid, even for a second, the screen locks (and the dialog box asking for my password is xscreensaver's). I'd like for this not to happen... Things I've tried/looked at already: xscreensaver settings - the "Lock Screen After" checkbox is not checked (though I've also tried it checked and set to 720 minutes) gconf-editor - apps -> gnome-screensaver -> lock_enabled is not checked System Settings - Power - "When the lid is closed" is set to "Do nothing" for both battery and A/C System Settings - Screen - Lock is "off" gconf-editor - apps -> gnome-power-manager -> buttons -> lid_ac && lid_battery are both set to "nothing" dconf-editor - apps -> org -> gnome -> desktop -> screensaver -> lock_enabled is not checked Output from: gsettings list-recursively org.gnome.settings-daemon.plugins.power: org.gnome.settings-daemon.plugins.power active true org.gnome.settings-daemon.plugins.power button-hibernate 'hibernate' org.gnome.settings-daemon.plugins.power button-power 'suspend' org.gnome.settings-daemon.plugins.power button-sleep 'suspend' org.gnome.settings-daemon.plugins.power button-suspend 'suspend' org.gnome.settings-daemon.plugins.power critical-battery-action 'hibernate' org.gnome.settings-daemon.plugins.power idle-brightness 30 org.gnome.settings-daemon.plugins.power idle-dim-ac false org.gnome.settings-daemon.plugins.power idle-dim-battery true org.gnome.settings-daemon.plugins.power idle-dim-time 10 org.gnome.settings-daemon.plugins.power lid-close-ac-action 'nothing' org.gnome.settings-daemon.plugins.power lid-close-battery-action 'nothing' org.gnome.settings-daemon.plugins.power notify-perhaps-recall true org.gnome.settings-daemon.plugins.power percentage-action 2 org.gnome.settings-daemon.plugins.power percentage-critical 3 org.gnome.settings-daemon.plugins.power percentage-low 10 org.gnome.settings-daemon.plugins.power priority 1 org.gnome.settings-daemon.plugins.power sleep-display-ac 600 org.gnome.settings-daemon.plugins.power sleep-display-battery 600 org.gnome.settings-daemon.plugins.power sleep-inactive-ac false org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 0 org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type 'suspend' org.gnome.settings-daemon.plugins.power sleep-inactive-battery true org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 0 org.gnome.settings-daemon.plugins.power sleep-inactive-battery-type 'suspend' org.gnome.settings-daemon.plugins.power time-action 120 org.gnome.settings-daemon.plugins.power time-critical 300 org.gnome.settings-daemon.plugins.power time-low 1200 org.gnome.settings-daemon.plugins.power use-time-for-policy true gnome-settings-daemon is running: <~> $ ps -ef | grep gnome-settings-daemon 1000 1719 1645 0 19:37 ? 00:00:01 /usr/lib/gnome-settings-daemon/gnome-settings-daemon 1000 1726 1 0 19:37 ? 00:00:00 /usr/lib/gnome-settings-daemon/gsd-printer 1000 1774 1645 0 19:37 ? 00:00:00 /usr/lib/gnome-settings-daemon/gnome-fallback-mount-helper Anything else I can check? Thanks!

  Read the article

• CloneZilla PXE Boot Without NFS

  - by John

  I am trying to setup CloneZilla to be bootable via PXE without using NFS. I do not have NFS running on our PXE server and would like to keep it that way. However, most of the information that I have found online indicates that you need to setup NFS in order to PXE boot CloneZilla. I believe that I am pretty close in getting it to work, but am not sure where to go next. Listed below are the different PXE menu option configurations that I have used so far. LABEL Clonezilla Live MENU LABEL Clonezilla Live KERNEL utilities/clonezilla/vmlinuz APPEND initrd=utilities/clonezilla/initrd.img boot=live live-config noswap nolocales edd=on nomodeset ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" o$ I have also tried the following append lines, without success: APPEND initrd=utilities/clonezilla/initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=tftp://10.130.155.23/filesystem.squashfs APPEND initrd=utilities/clonezilla/initrd.img boot=live union=aufs noswap noprompt vga=normal nomodeset nosplash fetch=tftp://10.130.155.23/filesystem.squashfs Each of them have resulted in a no go with the following error: "Unable to find a live file system on the network". It looks like it gets to the point of trying to load the filesystem.squashfs file, hangs, and then throws the error. Any help would be greatly appreciated.

  Read the article

• what is acceptable datastore latency on VMware ESXi host?

  - by BeowulfNode42

  Looking at our performance figures on our existing VMware ESXi 4.1 host at the Datastore/Real-time performance data Write Latency Avg 14 ms Max 41 ms Read Latency Avg 4.5 ms Max 12 ms People don't seem to be complaining too much about it being slow with those numbers. But how much higher could they get before people found it to be a problem? We are reviewing our head office systems due to running low on storage space, and are tossing up between buying a 2nd VM host with DAS or buying some sort of NAS for SMB file shares in the near term and maybe running VMs from it in the longer term. Currently we have just under 40 staff at head office with 9 smaller branches spread across the country. Head office is runnning in an MS RDS session based environment with linux ERP and mail systems. In total 22 VMs on a single host with DAS made from a RAID 10 made of 6x 15k SAS disks.

  Read the article

• What usb-bootable utility should I use to copy SATA hard drives?

  - by Steve Brown

  I have a computer that only has two SATA connections and I need to copy one SATA hard drive to another. Since I have to unplug the CD drive to copy the drives I need a USB-bootable utility. I have an old school copy of Norton Ghost (CD based): Ghost has always worked well for me in the past - I see there is a new "version 15" out but I'm not sure if it is worth buying. A friend has Acronis True Image on a USB drive: We tried to use that on the computer but it was unable to copy both partitions (restore partition and main partition). Of course there may be some problem with the drive that is keeping Acronis from working (it is just exiting with a lame error about not being able to copy the disks and no error code or detailed information), but I'm interested in knowing if there is a better, more solid, or widely used solution that I should invest in. What usb-bootable utilities can I use to copy SATA hard drives?

  Read the article

• Will hibernating an undergoing bitlocker encryption, damage the drive?

  - by Starx

  Yesterday, I began encrypting a 500GB harddisk. Now I have to go to college and during my absense, I want to hibernate an undergoing bitlocker encryption. But I want to know if this is going to create problem on my harddisk.

  Read the article

• Cannot resize OS X partition

  - by David Pearce

  I am trying to resize my existing Mac OS Extended partition on my Macbook to install Windows 7 (using steps similar to these), but when ever I go to apply the changes, I get this error: Partition failed Partition failed with the error: The partition cannot be resized. Try reducing the amount of change in the size of the partition. The total capacity of the hard drive in question is 260GB, with the entirety being taken up by the OS X boot partition. There is I am aiming to shrink that partition down to 60GB. How can I fix this problem? I have been reducing the amount of change by 10GB each attempt, but it still is not working. I assume the problem is that there is not a large amount of continuous space on the device. Is there some way to can do a manual defrag that would rectify this problem?

  Read the article

• ubuntu hardrive repartition without uninstalling ubuntu or windows 7 and losing data of hardrive

  - by user141692

  I have and asus r500v with 750 gb gpt system uefi motherboard core i7 3610qm, nvidia geforce gt, with ubuntu and w7 dual boot, I had problems installing ubuntu because of the grub but I fix it with https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/807801, but I still have the problem of "warning: the partition is misaligned by 3072 bytes. this may result iin very poor performance. Repartitioning is suggested" in every linux partitioin I made and my 750 gb is not being used at the maximun capacity it only uses 698 gb. I want to make partitions so that the warning doesnt show up and I can use the maximum capacity of the HDD, as I did with another dual boot laptop (compaq presario cq40). I have the following partitions: unknown 1.0Mb: partition type: lynux Basic DAta partition, device: /dev/sda2 Usage: --, Partition flags: --, partition label:-- warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -system 210 Mb FAt, usage: Filesystem, partition type: EFI system Partition, Partition Flags:--, Label: system, Device: /dev/sda1, partition label: EFI system partition, Capacity 210MB, avilable:--, Mount Point: mounted at /boot/efi -134 Mb NTFS, usage: filesystem, partition type: linux basic data partition, partition flags:.--, device: /dev/sda7, partition label: --, capacity: 134MB,available:--, mount point: not mounted -OS 250 GB NTFS, usage: file system, partititon type: linux basic data partition, partition flags: --, type: NTFS, label: OS, device: /dev/sda3, partition label: basic data partition, capacity: 250 GB, available:-, mount point: not mounted -10GB FAT 32, usage: filesystem, partition type: EFI system partition, partition flags:--, type: FAT 32, label: --, device: /dev/sda4, partition label: --, capacity: 10GB, available:--, mount point: not mounted warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -10gb ext 4, usage: file system, partition type: linux basic data partition, partition flags:--, type: EXT4(version1) label:--, device: /dev/sda9, partition label:--, capacity: 10 GB, available:--, mount point at / warning: the partition is misaligned by 1536 bytes. this may result in very poor performance. repartitioning is suggested. -478GB ext4, usage: filesystem, partition type: linux basic data partition, partition flags:--, type: EXT4, label:--, device: /dev/sda5, partition label:--, capacity: 478gb, available:--, mount point: mounted at /home warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. -2.0gb Swap 2.0Gb, usage: swap space, partition type: linux swap partitioin, partition flags:-, device: /dev/sda6, partition label: capacity: 2.0gb warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. and as you can see it is not well organized so please help me to organize the partitions witahout uninstalling the w7, and if possible the grub2

  Read the article

• ext4 jbd2 journaling active even on empty filesystem

  - by Paul

  I have been having several issues with my ext4 filesystems that seem to be due to jbd2 journaling. I made a related post here and am rephrasing it with the hope that someone may be able to help. For a minimal example, I start with an empty 8gb USB stick and use gparted to create one ext4 partition. The command used by gparted when creating the ext4 file system is: mkfs.ext4 -j -O extent -L DataTraveler8gb /dev/sde1 I check the filesystem with gparted: e2fsck -f -y -v /dev/sde1 and I mount it: sudo mount /dev/sde1 /media/test The disk is empty, but the journaling is very active on this disk (/dev/sde1). The other disks are ext4 SSDs formatted similarly. A snapshot of iotop: % sudo iotop -oPa Total DISK READ: 0.00 B/s | Total DISK WRITE: 2027.21 K/s PID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 262 be/3 root 0.00 B 56.00 K 0.00 % 0.18 % [jbd2/sda1-8] 29069 be/3 root 0.00 B 0.00 B 0.00 % 0.16 % [jbd2/sde1-8] 891 be/3 root 0.00 B 4.00 K 0.00 % 0.03 % [jbd2/sdc1-8] What is jbd2 doing with /dev/sde1? If I follow the same steps with a larger 2Tb disk, iotop indicates this empty disk is constantly being written to by jbd2 at the rate of Mb/s as soon as I mount it. On the other disks, which have the OS and /home, I have tried to find if any files are being modified by processes to cause this behavior but couldn't find any. I also moved many of the disk intensive process to use a tmpfs. And used noatime. I have another non-SSD hard disk on this machine, /dev/sdb, that is also ext4 but was not formatted by gparted (given to me by a coworker). It does not appear in iotop. So I am assuming there an issue with gparted. Any suggestions are appreciated. Also any tips on how to modify existing partitions to fix the issue without having to start from scratch would be great. There are some posts related to jbd2 but they didn't help (eg. here).

  Read the article

• MD3200 - 3 to 4x less throughput than MD1220. Am I missing something here?

  - by Igor Polishchuk

  I have two R710 servers with similar configuration. One in my office has MD1220 attached. Another one in the datacenter of my hosting services vendor has MD3200. I'm getting significantly worse throughput from MD3200 at my vendors setup. I'm mostly interested in sequential writes, and I'm getting these results in bonnie++ and dd tests: Seq. writes on MD1220 in my office: 1.1 GB/s - bonnie++, 1.3GB/s - dd Seq. writes on MD3200 at my vendor's: 240MB/s - bonnie++, 310MB/s - dd Unfortunately, I could not test the exactly the same configurations, but the two I have should be comparable. If anything, my good performing environment is cheaper than the bad performing. I expect at least similar throughput from these two setups. My vendor cannot really help me. Hopefully, somebody more familiar with the DAS performance can look at it and tell if I'm missing something here and my expectations are too high. To summarize, the question here is it reasonable to expect about 100MB/s of sequential write throughput per each couple of drives in RAID10 on MD3200? Is there any trick to enable such performance in MD3200 with dual controller as opposed to simple MD1220 with a single H800 adapter? More details about the configurations: A good one in my office: Dell R710 2CPU X5650 @ 2.67GHz 12 cores 96GB DDR3, OS: RHEL 5.5, kernel 2.6.18-194.26.1.el5 x86_64 20x300GB 2.5" SAS 10K in a single RAID10 1MB chunk size on MD1220 + Dell H800 I/O controller with 1GB cache in the host Not so good one at my vendor's: Dell R710 2CPU L5520 @ 2.27GHz 8 cores 144GB DDR3, OS: RHEL 5.5, kernel 2.6.18-194.11.4.el5 x86_64 20x146GB 2.5" SAS 15K in a single RAID10 512KB chunk size, Dell MD3200, 2 I/O controllers in array with 1GB cache each Additional information. I've also ran the same tests on the same vendor's host, but the storage was: two raids of 14x146GB 15K RPM drives RAID 10, striped together on the OS level on MD3000+MD1000. The performance was about 25% worse than on MD3200 despite having more drives. When I ran similar tests on the internal storage of my vendor's host (2x146GB 15K RPM drives RAID1, Perc 6i) I've got about 128MB/s seq. writes. Just two internal drives gave me about a half of 20 drives' throughput on MD3200. The random I/O performance of the MD3200 setup is ok, it gives me at least 1300 IOPS. I'm mostly have problems with sequentioal I/O throughput. Thank you for looking into it. Regards Igor

  Read the article

• The difference between desktop-series HDD drives and server-series

  - by FractalizeR

  Hello. What are the main differences between desktop-series hard disks and server-series? The obvious things I can see are: durability (server hardware mostly more qualitative and have more warranty) and power consumption (server hardware more focused on performance, than on power economy). Also server disks are usually a little faster, but it seems, that it is not always the case. May be there are some other reasons, that make you choose server-oriented series (Seagate ES drives, for example) over desktop-oriented ones (Seagate Barracuda series)? What are they?

  Read the article

• Migration with SysPrep, ImageX and

  - by Jack Smith

  I know that you can use SysPrep and ImageX to create a prepared image that can be used on several systems but the question is. How well does it work in a corporate environment of moving machines from old hardware off to new harddrives and new hardware? EDIT: The system runs accounting software and databases. So would SysPrep remove all License keys and other information which means would cause problems right? Would something else be a better option even though there are heavy costs involved? Currently, when I clone/copy the drive, Windows will black screen on me. So I need something with differential hardware support?

  Read the article

• What would I need to do to clone a Linux install to another machine?

  - by Marcus Hughes

  Basically, I want to make an image of one Linux install I have, and distribute it over similar (if not identical) spec machines on a network. I know it is possible, however am unsure of what needs to be done before I make the image of the install to ensure it works correctly on all machines. First think I know needs to be done, is remove all interface configuration, as I assume it would just jump to eth1 (and possibly use the same MAC), as it wont locate the network interface it had before, how would I do this so it auto detects and goes to eth0 again? Is there anything else I would need to do to the install before I make its image?

  Read the article

• Simple Workstation Imaging Solution?

  - by user23087

  I need a fairly cheap imaging solution for Windows XP corporate desktops. Ideally, I'd be able to set up a desktop exactly as we want it, create an image, deploy this image to a server, then boot a new desktop to a CD/USB Drive/Network and quickly set up the workstation. Ideally, each computer would also have a unique workstation name. Any ideas? Right now I'm using a custom built Linux DD solution, but it's slow, not network-based, can't image multiple computers at the same time as there's only one copy on a USB drive, and can't uniquely name the computers. Thanks, Will

  Read the article

• Disabling partition just for one OS on multi-boot system

  - by Emiswelt

  Hi Regarding to the solution there: http://serverfault.com/questions/36385/how-can-i-mount-a-hard-drive-as-read-only-on-windows-xp I have a system with three partitions. One runs windows 7, one runs windows XP and is for some experimental programming and testing. I don't want to mess up anything, so I am going to disable the windows 7 partition like described on the linked page above from windows XP to protect the operating system. When I do this, is the windows 7 partition only disabled for the running XP os, or is the windows 7 partition rendered unbootable? with best regards

  Read the article

• How can I free up some space in my C: drive?

  - by Faraaz

  Each time I try to save a file, I get a message from my computer (with Windows 7) that asks me to free up some space in my Drive C before being able to save my intended file. But the more I search for extraneous files to delete, the more I get frustrated. I simply can't find out what "extra" file(s) I have that are occupying about 20 gigs of my C drive. As far as I know I save all the downloadable stuff to my other drives, and the most part of what I do with my computer is just Internet browsing. Would you please help me find the file or files that have occupied so much space in my Drive C so that I can remove them?

  Read the article

• Setting up a Pagefile and Partition in Server 2008

  - by Brett Powell

  I am setting up 18 new machines for our company, and I have instructions from my new boss on setting up a Pagefile and Partition. I have looked at their existing machines to base the new setups off of, but there is no consistency between any 2 machines, which has left me extremely frustrated to say the least. My instructions are... 1) Set a static pagefile (use recommended value as max/min), set it on SSD if SSD available. 2) Make 3 partitions: C: is used for OS and install files D: is used for backups on machines with a SSD. On machines without SSD create a D: partition for pagefile (2*installed RAM for partition size) E: must be the partition hosting user files I have never messed with Pagefiles before, and looking at their existing machines is offering no help. My questions are... 1) As the machines I am setting up have no SSD (just 2 SATA drives) does it sound like the Pagefile should be setup on the C: (primary) drive or the D:? The instructions are vague so I have no idea. 2) As C: and D: are both Physical drives, does it sound like C: should be partitioned out to create the E: drive or D:? Thanks for any help I can get. I am extremely stressed out under a massive workload right now, and these vague instructions are quite infuriating.

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >