Search Results

Search found 2572 results on 103 pages for 'pick'.

Page 70/103 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• Samsung S23A750D 23" 120Hz get no signal

  - by John Carter

  I have a few days ago received this monitor. Samsung S23A750D 23" 120Hz I am using it with a Gainward Nvidia GTX570 Phantom GPU via DisplayPort cabling. The trouble I am having is that the monitor has great trouble picking up a signal from the GPU when the computer has gone into sleep mode or been switched off (at this point I can get a signal to the monitor). It's only when I turn the computer back on and then the monitor that I get no signal. To get a signal I have to remove the power cable and put back in or sometimes remove the DP cable and put back in. I have tried not turning the monitor off (the monitor goes into a sleep mode when the computer goes into sleep mode) but on putting the computer on it does not pick up a signal. It is only by removing the power cable and/or DisplayPort cable will I get a signal. And this is intermittent. I have tried upgrading the firmware from Samsung but this hasn't helped. Any ideas?

  Read the article

• Prevent Outlook 2010 Insert Picture resizing image

  - by Rup

  When I "Insert Picture" a JPEG in Outlook 2010 it automatically resizes the image and, I think, recompresses it too. I realise this would be useful for photographs or for people who try to email 1MB BMPs but I would like to email around an image at the original pixel size without recompression. Is there a way to turn this off, or better still choose settings for each image insert? I found this page in the Office help. It's for Word, PowerPoint and Excel not Outlook but points you at File, Options, Advanced, Image Settings. There's no equivalent section in Outlook. I know Outlook uses Word as its editor so I've looked at Word's settings but there isn't an 'original size' here: there's only 'turn off image recompression' and pick target DPI from 96, 150, 220. I guess Office is finding a DPI value in the JPEG file and scaling it up or down to match this setting. I can't find an equivalent option in Outlook's options menu but there's so many settings and pop-up dialogs I may have missed something. Picture Format, Reset image size resets the image to the rescaled version, not the original. I can't see a way to edit a pixel value into size values in the image properties after insert. Thanks! I realise I can probably achieve this by editing the image metadata in PhotoShop elements or similar but there ought to be a way without editing the file? This is new behaviour in Outlook 2010; 2007 didn't do this.

  Read the article

• EC2 configuration for medium load service on Django

  - by Luberg

  I have created a very basic Django application which puts an email to the database (Coming soon page for a startup). I launched a t1.micro instance to try out which load it can carry out. Nginx+FastCGI from Django+sqllite/postgres - tried both. blitz.io test gave me a pretty unhappy result (just 100 users within 1 minute): This rush generated 542 successful hits in 1.0 min and we transferred 809.01 KB of data in and out of your app. The average hit rate of 8.81/second translates to about 761,612 hits/day. You got bigger problems though: 87.28% of the users during this rush experienced timeouts or errors! I tried both to put varnish, disabled Debub mode in django and started fastcgi in threaded mode - nothing helps. This is not gonna be a super highload page - just a coming soon page to save email of subscribers, it should carry at least 500-1000 users at the same time in peak... I believe t1.micro is super small for that, but I also have tried small instance - not better result.. Please let me know should I use something different from Amazon EC2, or to pick smth better than t1.micro, or I that is definetely a configuration issues?...

  Read the article

• Possible Solution for Setting up a Linux VPN Server to Encrypt WLAN Traffic of Macs and iPhones on

  - by GorillaPatch

  I would like to set up a VPN server on debian linux to encrypt wireless traffic coming from my Mac or iOS device. I would like to use a certificate-based solution. Setting up a PKI infrastructure and managing certificates is OK for me. 1. Which server to pick? By looking through the internet and here on stackoverflow I found the following possible solutions: strongSwan IPSec and racoon Which solution is feasible for a linode running debian squeeze? 2. How to configure the network? If I understood correctly a VPN has a virtual network interface as an endpoint on the server side. Naively I would think that I need a DHCP server running on the server to assign a dynamic private IP (like of the class C network 192.168.xxx.xxx) to the connecting clients. Next I think I would need to set up masquerading to NAT the incoming VPN traffic to the real interface directly connected to the internet. Is this the right way to go? Do you have any configuration examples? I often saw VPN configurations used to connect to your home network, but that is not what I am looking for. I have a server up in the internet and want to use it as a proxy to encrypt traffic in insecure network environments like public WLANs.

  Read the article

• Multiple rack apps on nginx + passenger, one as root, the other not...config help

  - by cannikin

  So I've got two apps I want to run on a server. One app I would like to be the "default" app--that is, all URLs should be sent this app by default, except for a certain path, lets call it /foo: http://mydomain.com/ -> app1 http://mydomain.com/apples -> app1 http://mydomain.com/foo -> app2 My two rack apps are installed like so: /var /www /apps /app1 app.rb config.ru /public /app2 app.rb config.ru /public app1 -> apps/app1/public app2 -> apps/app2/public (app1 and app2 are symlinks to their respective apps' public directories). This is the Passenger setup for sub URIs described here: http://www.modrails.com/documentation/Users%20guide%20Nginx.html#deploying_rack_to_sub_uri With the following config I've got /foo going to app2: server { listen 80; server_name mydomain.com; root /var/www; passenger_enabled on; passenger_base_uri /app1; passenger_base_uri /app2; location /foo { rewrite ^.*$ /app2 last; } } Now, how do I get app1 to pick up everything else? I've tried the following (placed after the location /foo directive), but I get a 500 with an infinite internal redirect in error.log: location / { rewrite ^(.*)$ /app1$1 last; } I hoped that the last directive would prevent that infinite redirect, but I guess not. /foo gets the same error. Any ideas? Thanks!

  Read the article

• Fedora installed in Legacy mode, how to make it work in UEFI?

  - by TryntaLearn

  I am trying to install a linux distribution on my new laptop. It's an MSI GE40 which comes preinstalled with windows 8. It's a UEFI machine. I have tried installing Ubuntu and Fedora with limited success. I've tried: running it in UEFI, UEFI with CSM mode, with secureboot enabled, ... with secureboot disabeled, ... with secureboot enabled but in user mode. I have had no success with any of these methods. With Ubuntu the grub loader shows up, but when I pick 'try ubuntu', or 'install ubuntu', it's just a blank screen(I've been using liveusb's btw). With Fedora, it'll show me the next screen on which it says 'binary authorised by vendor certificate' or 'Secure boot not enabled' and then stop doing anything. The closest thing to success I reached was switching to legacy mode to install Ubuntu, in which case I was able to get to the ubunutu installer but it wouldn't recognize windows 8 on my computer, so instead of continuing on I rebooted, and removed the USB pendrive to find my computer couldn't find windows 8. After a little dicking about I got it to find windows 8 again. Any ideas on how I should go about trying to install a distro on my computer? UPDATE:- So I ended up installing fedora using Legacy mode. To use both it and Windows at boot, I manually enter automatic repair so I can get to my UEFI settings and switch boot mode to UEFI to boot windows 8. I guess my question needs to be modified as to how do I get all of this to work in UEFI mode, so I can dual boot via selection through a bootloader, and not by repeatedly switching boot mode.

  Read the article

• How do I count the times each number appears in columns of numbers?

  - by Andy C.

  I am sure this must be easy, but I am inexperienced. About the best way to think of my problem is to think of it as trying to sort and then count lottery numbers. To stay simple, let's do a Pick 3 game. Let's look at 10 drawings. I would split each drawn number into a separate column: DATE BALL#1 BALL#2 BALL#3 3/1 1 3 5 3/2 3 7 8 3/3 2 2 1 3/4 5 7 6 3/5 2 3 1 3/6 0 5 9 3/7 3 7 0 3/8 6 8 4 3/9 2 4 3 3/10 7 1 2 I would like to be able to build formulas into cells that would tell me how many times each number appeared overall, and how many times each number appeared in the position it occurred. Like this (using the above example): Number Overall Count Ball#1 Count Ball#2 Count Ball#3 Count 0 2 1 0 1 1 4 1 1 2 (That is, The number zero appears twice overall, and came up once as the first number drawn; zero times as the middle ball; and once as the third ball. Likewise, the number 1 was drawn four times in our 10-day period. It was the first ball once, the second ball once and the third ball twice.) And so on. All help appreciated. I have access to Excel and Microsoft Works, or of course if there is a Google Docs way to handle this All thanks for any help.

  Read the article

• Intell SSD + Win 7 after crash can not repair, can not re install

  - by Ori

  I have Lenovo w520, after i bought it i took away old hhd (no longer with me) and replaced it with intel ssd, it worked perfectly for 1 year or so, today my system fr0ze and after waiting for some time i didi hard reset - it wasn't able to boot anymore at all, i do not see any messages from windows ever, it only loads Intel boot utility that suggests to pick one of 3 devices to boot, it has my hdd there but nothing happens. /I dont have recovery tools from lenovo since i moved to another country, i got win 7 cd from a friend (came with his laptop) abd if in bios i have AHCI - it doesnt see my ssd, if compatible mode - it sees it but format not available, partition creation gives b\me 8007045 error. I tried diskpart, in compatible mode it sees my disk but doesnt do recover or clean all, also win 7 disk tools dont do anything if i try to do boot fix... I am ok with erasing it but i seem not to be able too, i jus tneed the machine to wpork asap, all my files are on external drives so i dont care about formatting. please help! I am given a very old machine by a friend so i am able to browse internet... it is under XP...

  Read the article

• Lots of strange IP addresses in my Windows Firewall logs. Concern?

  - by gmoore

  Was trying to debug a Samba sharing issue with Mac OS X so I turned on logging for my Windows Firewall. I didn't expect a lot of conections but the thing filled up quickly. Here's a sample: 2009-12-21 08:49:32 OPEN-INBOUND TCP 192.168.0.4 192.168.0.3 56335 139 - - - - - - - - - 2009-12-21 08:49:33 OPEN-INBOUND TCP 192.168.0.4 192.168.0.3 56337 139 - - - - - - - - - 2009-12-21 08:50:02 OPEN UDP 192.168.0.3 68.87.73.242 1389 53 - - - - - - - - - 2009-12-21 08:50:02 CLOSE TCP 192.168.0.3 212.96.161.238 1391 80 - - - - - - - - - 2009-12-21 08:50:02 OPEN UDP 192.168.0.3 68.87.71.226 60290 53 - - - - - - - - - 2009-12-21 08:50:02 OPEN TCP 192.168.0.3 212.96.161.238 1391 80 - - - - - - - - - 2009-12-21 08:50:02 OPEN TCP 192.168.0.3 212.96.161.238 1393 80 - - - - - - - - - 2009-12-21 08:50:04 CLOSE TCP 192.168.0.3 212.96.161.238 1393 80 - - - - - - - - - 2009-12-21 08:50:41 CLOSE UDP 192.168.0.3 192.168.0.4 137 50300 - - - - - - - - - I can pick out the local IP addresses (192.168.0.3 is my Windows XP machine, 192.169.0.4 is Mac OS X) as I debug the Samba issue. But some of the others resolve to Comcast (my ISP) and others resolve to weird hosts like van-dns.com and navisite.net. It doesn't look like any connection sent/received any bytes. I used the reference here: http://technet.microsoft.com/en-us/library/cc758040%28WS.10%29.aspx. Is it a cause for concern?

  Read the article

• Load balancing with puppet

  - by Gonçalo Queirós

  Hi there. Im trying to setup a loadbalancing system. My load balancer (nginx) has a conf file where i should list all IP's of the upstream servers. I could put the IP's on the conf manually, but this ways i would need to change the conf file every time i add/remove an upstream server. For now i came up with two different ideas, but i don't like much of neither: 1 - Have every upstream machine to use Exported Resources to create a file with it's IP..Then the load balancer server will have an "include conf_directory/*", and load all the files created by the upstrem servers. Since the load balancer is using nginx this can be done, but if i wan't latter on to configure something that doesn't have the "include" on the conf files, this solution will not work. 2 - If the config doesn't support the "include" command, then we could have again, every upstream server use the Exported Resources to create a filw with its IP, and latter on, the load balancer execute a command that would pick every file and generate the config Both versions addopt the same techinque, the difference is that version 2 is used when the server (that needs to have a conf generated) doesn't recognize a command like "include" inside its own conf. Now, my question is, is there any way to do this in a different form? I suspect that there is, since puppet is made to manage multiple servers, it seems a bit strange not have a easy way to configure load balancers.

  Read the article

• Why does Windows/Microsoft Updates always take such a long time to detect available updates?

  - by RLH

  It's a common task for many of us who work in any form of IT position using Windows. Eventually you have to install/re-install a version of Windows and what follows is a very long OS updating process. For a long time I have accepted the fact that this is a slow process and that's all there is to it. There is a lot to download, and some updates require restarts followed by further updates... Ugh! This morning I had to go through the process of installing Windows XP with SP3. I'm installing the OS on a VM on an SSD and I've been working on this thing for over 6 hours. Although, think there are many ways to knit-pick this process for improvements, there is one step that is always particularly slow and I can not figure out a good reason why. That step is the detection step on a manual update. Specifically, when navigate to the Windows (or Microsoft) Updates page, and then click the 'Custom' button to detect your updates. It appears that your PC just sits there for a painful amount of time. Check your Task Manager and it looks like your PC is, in fact, locked because your CPU isn't cooking but that's certainly not the case. Somethings happening but I have no clue what's going on? What is the updating software doing? If the registry was being searched, shouldn't my CPU usage peak? Does anybody know what's happening? I can loosely justify why some of the steps in the update process take so long. However, this one doesn't seem to have any reasoning.

  Read the article

• Adding file to /etc/cron.d doesn't make it run (ubuntu 10.04)

  - by tom

  If I scp a cron file into /etc/cron.d it doesn't run unless I edit the file and change the command. Then crond seems to pick up the cron file. How can I make cron reload its cron files in ubuntu 10.04? 'touch'ing the file doesn't work nor does 'restart cron' or 'reload cron'. My cron file is set to run every minute and logs to a file. Nothing ends up in the log file until I edit the command, and there's no entry for it in /var/log/syslog I'm stumped. Here's my cron file saved to /etc/cron.d/runscript # Runs the script every minute. This is safe because it will exit with success if it's already running * * * * * www-data if [ -f /usr/local/bin/thing ]; then exec /usr/bin/php /usr/local/bin/thing mode:prod -a 14 -d >> /var/log/thing/mything.log 2>&1; else echo `date +'[%D %T]'` "Thing not deployed. Command not run\n" >> /var/log/thing/mything.log; fi &

  Read the article

• Firefox v15.0 about:newtab inaccessible via the back button

  - by Willem

  As of this morning I upgraded my Firefox to version 15.0. Or well, it did it for me. That's when my issue began. I've configured Firefox so that when I open up a new tab via Ctrl-T that it loads the about:newtab page which was released in version 14.x(?). I use this functionality extensively. I visit a page from the about:newtab page, read it, press the back button and pick another frequent website from the display I want to visit. However as of v15.0 the latter part is no longer functioning, after visiting a website from the about:newtab page the back button will not let me go back to the about:newtab page. Firefox acts as if that history entry was never there. I've tried searching the release notes to see if this change was intentional or a reported bug, but I have not found anything related so far. Is there anyway to (re)configure the new Firefox v15.0 to let me access the about:newtab page via a tab's history? EDIT: It appears that this only affects the initial 'visit' to the about:newtab page when opening a new tab, manually visiting about:newtab will register it as a history entry and allow it to be navigated to via the back and forward buttons. So I guess this changes my question to 'How can I make Firefox 15.0 treat the inital page from a newtab as a history entry'.

  Read the article

• Windows 7 - media sharing extremely flakey (XBox 360)

  - by Nathan Ridley

  I have constant headaches with Windows Media Library sharing, which I'm using to share my video library (a whole lot of AVI files on my computer's hard drive) with the XBox 360. I have the whole setup working, so setup and basic configuration is not an issue. The issue is that Windows Media Library frequently fails to notice additions and modifications to the "watched" folders. Not only that, but often after I've added something new to the library, it fails to transmit this new library information to the 360, as is demonstrated by the fact that, using that 360, I navigate to my video library and the new folders don't show up in the list. Often the only way to get the 360 to see the changes is to exit out of "Videos" on the 360, then remove all videos from Windows Media Library, go back into videos on the 360 to confirm that nothing is shared, then re-add a few videos (but not too many) in Windows Media Library, then go back into the videos in the 360. The whole thing is a real pain in the bum and I really wish I could just add all my videos to Windows Media Library and have it keep watch without me having to kick it, and have the 360 pick up changes without me having to constantly rebuild the library. Any ideas?

  Read the article

• Nagios DNX plugins

  - by danneh3826

  I'm toying with the idea of multiple Nagios instances setup to monitor our infrastructure. I've looked at all the various methods of distributed Nagios checks, and I think DNX comes out the closest. DNX handles failure of worker nodes, that's fine. What happens if the main DNX server fails though? Is there a way to replicate the server too? I'm using AWS EC2 primarily, so I can utilise Elastic Load Balancing for the web UI, but I need to be able to handle the AZ where the monitoring server is to fail over, and essentially for a second to pick up the checking load (active/passive, active/active, so long as it doesn't fail completely) The other thing I'm trying to solve is an issue with routing. What I'd like is to have multiple nodes report a fault before Nagios confirms it as critical. Not the NRPE checks, as they're pretty self explanitory, but things more like check_ping. I often have routing issues out of AWS to certain datacenters, so Nagios can often report bad/no ping/timeout as a critical issue, even though the machine in question is working fine. Would it be possible to have a setup where a worker complains a service check is critical, and have a second worker node (positioned in another datacenter/AZ) also report the service as critical before the Nagios central server issues a critical alert? I realise I might be asking a bit much (how far down the line do you go setting up failover systems before it starts to get ridiculous), however surely someone must have thought of this scenario when developing DNX?

  Read the article

• h264 inside FLV container vs. MP4 container?

  - by Gotys

  I am developing a tube site, and currently having issues with h264 format . By looking at youtube, I noticed they are putting their hi-def videos into mp4 container, so logically I did the same. Next, I installed mod_h264_streaming for lighttpd to make streaming and timeline-scrubbing work. Problem is, that large files (500mb+ at somewhat high resolution) take for EVER to even start buffering ( I read the flowplayer or other flash players need to download metadata first) . I moved the xmov atom to the front of the file with MP4Box (i tried qt-quickstart too) , and the problem didn't go away. Next I read online I need to interleave audio tracks, so I did that too. No change in slowness. So I tried putting the same exact h264 movie into an FLV container, and the playback buffering starts almost instantly - no slowness. So what am I missing here? Why would I choose MP4 container with mod_264_streaming module , which seems super-slow over a regular FLV container with lighttpd's built-in mod_flv_streaming ? Obviously many websites pick mp4 container , but I fail to understand why ? And as a side question - I tried using HTML5's VIDEO tag to try the same h264 MP4 movie, and the scrubbing is LIGHTING FAST! I looked into lighttpd's log file, and i noticed taht Flash Players append video.mp4?start=234 each time timeline is scrubbed, wheres HTML5's video tag does no such thing . Is this some sort of limitations of Flash ? Why Can't flash streaming be same fast as HTML5 streaming? Thanks to ALL who can help. I very much appreciate this community.

  Read the article

• Can Windows Media Player create playlists based on folder structure?

  - by Chaulky

  Over the years I've carefully molded my digital media collection into a series of folders that make it easy for me to find what I'm looking for. I recently discovered the awesomeness that is streaming video from Windows 7 Media Player to the PS3 so I can watch it on the big screen without all the hassle of hooking the computer up to the TV. The problem is, I totally lose my carefully crafted folder structure and all my videos become one giant mess again... not cool! As a temporary solution, I've created a few playlists for my favorites (Dexter Season 4, Dexter Season 5, Breaking Bad Season 1, etc.). This is a HUGE pain in the a$$. So, is there a way to get Windows Media Player (on Windows 7) to maintain some sort of folder structure based on the location of the actual video files? So if I have my videos sorted into folders by show and season, Media Player will pick that up and let me browse it in the same way. As an alternative answer, I'll accept suggestions for a program that can also stream to PS3 and has this "folder organization" feature.

  Read the article

• Could I use Windows 7 instead of Windows SBS 2008 for this server?

  - by Ecyrb

  First off, I'm not a sys admin. I'm just a software developer trying to help out my parents' small business. Right now they have one server, a domain controller with a P4 processor running SBS 2003. They also have this machine hosting QuickBooks, MySQL for the old version of an app, and SQL Server 2008 Express for the new version of the app (which will replace the old eventually). They've been complaining about the workstations being slow so I figured it might help if they bought a new server and moved QuickBooks, MySQL, and SQL Server to the new server, leaving the old server as just a DC. In trying to pick an operating system for their new server, I was thinking about Windows SBS 2008 Standard with enough licenses for seven machines. But that's a lot more money than they're going to want to spend. So then I wondered if there's any real advantage to having a server OS as opposed to just throwing Windows 7 on the new server. It's a lot cheaper and I can't think of any SBS features that it would need if it's just hosting QuickBooks, MySQL, and SQL Server. Would it be okay to use Windows 7 for a server like this? Are there any advantages to using SBS 2008 that I would be missing out on? Any additional tips are much appreciated!

  Read the article

• 100% uptime for a web application

  - by Chris Lively

  We received an interesting "requirement" from a client today. They want 100% uptime with off-site failover on a web application. From our web application's viewpoint, this isn't an issue. It was designed to be able to scale out across multiple database servers, etc. However, from a networking issue I just can't seem to figure out how to make it work. In a nutshell, the application will live on servers within the client's network. It is accessed by both internal and external people. They want us to maintain an off-site copy of the system that in the event of a serious failure at their premises would immediately pick up and take over. Now we know there is absolutely no way to resolve it for internal people (carrier pigeon?), but they want the external users to not even notice. Quite frankly, I haven't the foggiest idea of how this might be possible. It seems that if they lose Internet connectivity then we would have to do a DNS change to forward traffic to the external machines... Which, of course, takes time. Ideas? UPDATE I had a discussion with the client today and they clarified on the issue. They stuck by the 100% number, saying the application should stay active even in the event of a flood. However, that requirement only kicks in if we host it for them. They said they would handle the uptime requirement if the application lives entirely on their servers. You can guess my response.

  Read the article

• Can I regenerate the rsa key for SSH access to a Cisco router? Or should I completely erase the SSH config?

  - by Josh

  I have a production 2691 that I administer via telnet. I'd like to change that to SSH. Looking at the config, it looks like there have been keys generated in the past. I think the history here is SSH was set up, they had issues connecting, and fell back to telnet. There are a number of crypto entries, including the following: crypto pki trustpoint Gateway-2691.xxx.com enrollment selfsigned subject-name cn=IOS-Gateway-2691.xxx.com revocation-check none rsakeypair Gateway-2691.xxx.com I've also got this going... Gateway-2691#sh ip ssh SSH Disabled - version 1.99 %Please create RSA keys (of atleast 768 bits size) to enable SSH v2. Authentication timeout: 120 secs; Authentication retries: 3 Gateway-2691# My question is simply, can I run crypto key generate rsa again to set it up again? Is there a way to negate or no all of the previous ssh config so that I can start fresh there? I may be asking the wrong questions, as I'm learning here. As for the SSH how-to, I'm sure I can find information in many places. I'm just basically wondering if I need to start fresh, or if I can pick up where the last attempt at SSH config left off.

  Read the article

• Should I use nginx exclusively, or have it as a proxy to Tomcat (performance related)?

  - by Kevin

  I've planned to create a website that'll be pretty heavy on dynamic content, and want to know what would be the wisest choice for part of my webstack. Right now I'm trying to decide whether I should develop upon nginx, using PHP to deliver the dynamic content, or use nginx as a proxy to Tomcat and use servlets to deliver the dynamic content. I have a good amount of experience with Java, JSP, and servlets, so that's a plus right off the bat. Also, since it is a compiled language, it will execute faster than PHP (it is implied here that Java is around 37x faster than PHP) , and will create the web pages faster. I have no experience with PHP, however i'm under the impression that it is easy to pick up. It's slower than Java, but since the client will only be communicating with nginx, I'm thinking that serving the dynamically created web pages to the client will be faster this way. Considering these things, i'd like to know: Are my assumptions correct? Where does the bottleneck occur: creating pages or serving them back to the client? Will proxying Tomcat with nginx give me any of nginx performance benefits if I'm going to be using Tomcat to generate the dynamic content (keeping in mind my site is going to be heavy in this aspect)? I don't mind learning PHP if, in the end, its going to give me the best performance. I just want to know what would be the best choice from that standpoint.

  Read the article

• Compatibility of Fedora install on a Hybrid drive

  - by kjh

  I recently bought un ultrabook with a 500gb/32gb sdd hdd hybrid drive, and I'm having trouble replacing windows on it with fedora seventeen. it errors out saying there was an unhandled exception. Is linux compatible with hybrid drives? or can the operating system on a hybrid drive not be replaced? Edit: here are the steps I select special storage devices because it ignores my hard drives otherwise at this point i get the message: "Disk contains bios raid meta data, disk sda will be ignored" I can pick a hostname, select my timezone and set a password at the install type screen, no matter what I select (use all free space, replace linux systems, create custom partition etc..) once I click next, it says "an unhandled exception" has occured. and I can no longer proceed with installation. Here is the error message: anaconda 17.29 exception report Traceback (most recent call first); File "/usr/lib64/python2.7/size-packages/pyanaconda/bootloader.py"; line 183 self.stage1_drive=self_drives[0] File "/usr/lib64/python2.7/site-packages/pyanaconda/rw/cleardisks_gui.ph"; line... and tons of more lines like that

  Read the article

• Trying to retrieve data with a thermaltake blacX enclosure: Windows 7 believes the drive to be "uninitialized"

  - by Peeter Joot

  I have a laptop that won't boot. It appears to be a power problem ... laptop auto-turns-off within about 10 seconds of pressing the power button (with power buttons lighted temporarily and no display with or without external monitor). I've followed the dell troubleshooting guide which suggested reseating the memory modules and the hard drives, but that didn't help. Before trying to have the laptop serviced, I wanted to get some data off off the hard drive. I bought a thermaltake blacX enclosure, intending to use this to both use to retrieve the drive data with, and then later use as external storage. Following the instructions (insert cables, insert drive power on) goes fine, and Windows 7 on another laptop installs the device driver software. However, no drive letter shows up in 'Computer'. Under Computer-manage-storage I see the drive is there, and there's an option to "initialize" the drive. The Windows "initialize" dialog gives me the option to pick between "MBR" and "GPT" partitioning, which sounds like a good way to destroy the data on the drive. I'm thinking that I've purchased the wrong device for the job (or that my old drive is damaged). The old drive to recover info from is a Western Digital 500G/7200rpm SATA drive if that is relavent. Both the original laptop and the one I'm using for recovery are running Windows 7. Does anybody have experience with using a blacX enclosure to recover data off an already formatted drive?

  Read the article

• Upgrading only certain packages via the getdeb repo

  - by intuited

  I'm a bit confused about how getdeb.net works now. The last time I got a package from there was a while ago; at that point the procedure was that you would just download a .deb for each package that you wanted to install/upgrade and then install it using dpkg -i. However the inexorable march of progress has lent its trumpets to this system as well, and getdeb installs are now done via their repo, which is registered with apt in /etc/apt/sources.list.d, after you install a single package that makes the changes to the apt database. I've installed that package, and I've discovered that aptitude dist-upgrade now wants to upgrade a lot of packages on my system that weren't ready for upgrades prior to the installation of the getdeb package. If I rename the file /etc/apt/sources.list.d/getdeb.list to something with a different extension, then do aptitude update && aptitude dist-upgrade, it stops wanting to upgrade packages. So I gather that the default behaviour is now to upgrade all packages to the version available at getdeb. This is not particularly appropriate, since these packages are not as well tested as the officially released versions. Is there a config setting somewhere that will prevent upgrading packages to versions from the getdeb repo unless this action is specifically selected? I'd like to be able to pick and choose what packages are upgraded via getdeb.

  Read the article

• Solutions on how to use an OS X calendar as a more perfect time tracking solution for 5-10 users in a small agency?

  - by jnthnclrk

  I really like OS X's iCal. Entering events is easy with the mouse and it also gives you a very real visual sense of how long tasks take to complete. We often work remotely in our organisation, so we use a few shared calendars between key individuals to provide us with an overview of hours worked, availability & schedule conflicts without too much disruption to our various, hectic workflows. It really is a neat solution, especially on shared tasks. How many times have you tasked a remote colleague and then lost the thread on whether that task was completed or not? With shared calendars you get a much clearer idea of what your people are working on without having to pick up the phone or compose a chat. However, there are a few areas where this approach fails... iCloud syncing often needs to be re-jiggered The "view only" option on shared calendars does not seem to work, which makes all shared calendars editable by others There is no decent reporting with this workflow There is no task categorisation or tagging Things get very busy in iCal when working with more than 2 shared calendars I've looked at a few task management apps like Basecamp and Harvest, but nothing appears to let me edit my calendar natively and then sync with a 3rd party. Interested in solutions to improve the above workflow and enable us to elegantly increase the amount of users.

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >