Search Results

Search found 2363 results on 95 pages for 'sleep'.

Page 70/95 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

  • How to inhibit suspend temporarily?

    - by Zorn
    I have searched around a bit for this and can't seem to find anything helpful. I have my PC running Ubuntu 12.10 set up to suspend after 30 minutes of inactivity. I don't want to change that, it works great most of the time. What I do want to do is disable the automatic suspend if a particular application is running. How can I do this? The closest thing I've found so far is to add a shell script in /usr/lib/pm-utils/sleep.d which checks if the application is running and returns 1 to indicate that suspend should be prevented. But it looks like the system then gives up on suspending automatically, instead of trying again after another 30 minutes. (As far as I can tell, if I move the mouse, that restarts the timer again.) It's quite likely the application will finish after a couple of hours, and I'd rather my PC then suspended automatically if I'm not using it at that point. (So I don't want to add a call to pm-suspend when the application finishes.) Is this possible? Any advice would be appreciated. Cheers. EDIT: As I noted in one of the comments below, what I actually wanted was to inhibit suspend when my PC was serving files over NFS; I just wanted to focus on the "suspend" part of the question because I already had an idea how to solve the NFS part. Using the 'xdotool' idea given in one of the answers, I have come up with the following script which I run from cron every few minutes. It's not ideal because it stops the screensaver kicking in as well, but it does work. I need to have a look at why 'caffeine' doesn't correctly re-enable suspend later on, then I could probably do better. Anyway, this does seem to work, so I'm including it here in case anyone else is interested. #!/bin/bash # If the output of this function changes between two successive runs of this # script, we inhibit auto-suspend. function check_activity() { /usr/sbin/nfsstat --server --list } # Prevent the automatic suspend from kicking in. function inhibit_suspend() { # Slightly jiggle the mouse pointer about; we do a small step and # reverse step to try to stop this being annoying to anyone using the # PC. TODO: This isn't ideal, apart from being a bit hacky it stops # the screensaver kicking in as well, when all we want is to stop # the PC suspending. Can 'caffeine' help? export DISPLAY=:0.0 xdotool mousemove_relative --sync -- 1 1 xdotool mousemove_relative --sync -- -1 -1 } LOG="$HOME/log/nfs-suspend-blocker.log" ACTIVITYFILE1="$HOME/tmp/nfs-suspend-blocker.current" ACTIVITYFILE2="$HOME/tmp/nfs-suspend-blocker.previous" echo "Started run at $(date)" >> "$LOG" if [ ! -f "$ACTIVITYFILE1" ]; then check_activity > "$ACTIVITYFILE1" exit 0; fi /bin/mv "$ACTIVITYFILE1" "$ACTIVITYFILE2" check_activity > "$ACTIVITYFILE1" if cmp --quiet "$ACTIVITYFILE1" "$ACTIVITYFILE2"; then echo "No activity detected since last run" >> "$LOG" else echo "Activity detected since last run; inhibiting suspend" >> "$LOG" inhibit_suspend fi

    Read the article

  • problem with network-manager-pptp

    - by Riuzaki90
    I've a problema with the VPA CAble connection of my university... on the website of the university there's a .sh file that set all the variables of the connection in ETC/PPP/PEERS and another .sh file that call the connection...I'm on ubuntu 11.10 and when I run the setup.sh I have this error: impossible to find network-manager-pptp these are the two file that I had talk about: #!/bin/bash echo "Creazione della connessione in corso attendere........." apt-get update apt-get install pptp-linux network-manager-pptp echo -n "Digitare la propria Username: " read USERNAME echo -n "Digitare la propria Password: " read PASSWORD pptpsetup --create UNICAL_Campus_Access --server 160.97.73.253 --username $USERNAME --password $PASSWORD echo 'pty "pptp 160.97.73.253 --nolaunchpppd"' >/etc/ppp/peers/UNICAL_Campus_Access echo 'require-mppe-128' >>/etc/ppp/peers/UNICAL_Campus_Access echo 'file /etc/ppp/options.pptp'>>/etc/ppp/peers/UNICAL_Campus_Access echo 'name '$USERNAME''>>/etc/ppp/peers/UNICAL_Campus_Access echo 'remotename PPTP'>>/etc/ppp/peers/UNICAL_Campus_Access echo 'ipparam UNICAL_Campus_Access'>>/etc/ppp/peers/UNICAL_Campus_Access echo $USERNAME' PPTP '$PASSWORD' *'>>/etc/ppp/chap-secrets rm /etc/ppp/options.pptp echo '###############################################################################'>/etc/ppp/options.pptp echo '# $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $'>>/etc/ppp/options.pptp echo '#'>>/etc/ppp/options.pptp echo '# Sample PPTP PPP options file /etc/ppp/options.pptp'>>/etc/ppp/options.pptp echo '# Options used by PPP when a connection is made by a PPTP client.'>>/etc/ppp/options.pptp echo '# This file can be referred to by an /etc/ppp/peers file for the tunnel.'>>/etc/ppp/options.pptp echo '# Changes are effective on the next connection. See "man pppd".'>>/etc/ppp/options.pptp echo '#'>>/etc/ppp/options.pptp echo '# You are expected to change this file to suit your system. As'>>/etc/ppp/options.pptp echo '# packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/'>>/etc/ppp/options.pptp echo '# and the kernel MPPE module available from the CVS repository also on'>>/etc/ppp/options.pptp echo '# http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe.'>>/etc/ppp/options.pptp echo '###############################################################################'>>/etc/ppp/options.pptp echo '# Lock the port'>>/etc/ppp/options.pptp echo 'lock'>>/etc/ppp/options.pptp echo '# Authentication'>>/etc/ppp/options.pptp echo '# We do not need the tunnel server to authenticate itself'>>/etc/ppp/options.pptp echo 'noauth'>>/etc/ppp/options.pptp echo '#We won"t do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2'>>/etc/ppp/options.pptp echo '#(you may need to remove these refusals if the server is not using MPPE)'>>/etc/ppp/options.pptp echo 'refuse-pap'>>/etc/ppp/options.pptp echo 'refuse-eap'>>/etc/ppp/options.pptp echo 'refuse-chap'>>/etc/ppp/options.pptp echo 'refuse-mschap'>>/etc/ppp/options.pptp echo '# Compression Turn off compression protocols we know won"t be used'>>/etc/ppp/options.pptp echo 'nobsdcomp'>>/etc/ppp/options.pptp echo 'nodeflate'>>/etc/ppp/options.pptp echo '# Encryption'>>/etc/ppp/options.pptp echo '# (There have been multiple versions of PPP with encryption support,'>>/etc/ppp/options.pptp echo '# choose with of the following sections you will use. Note that MPPE'>>/etc/ppp/options.pptp echo '# requires the use of MSCHAP-V2 during authentication)'>>/etc/ppp/options.pptp echo '# http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras'>>/etc/ppp/options.pptp echo '# ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o'>>/etc/ppp/options.pptp echo '#{{{'>>/etc/ppp/options.pptp echo '# Require MPPE 128-bit encryption'>>/etc/ppp/options.pptp echo '#require-mppe-128'>>/etc/ppp/options.pptp echo '#}}}'>>/etc/ppp/options.pptp echo '# http://polbox.com/h/hs001/ fork from PPP project by Jan Dubiec'>>/etc/ppp/options.pptp echo '#ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o'>>/etc/ppp/options.pptp echo '#{{{'>>/etc/ppp/options.pptp echo '# Require MPPE 128-bit encryption'>>/etc/ppp/options.pptp echo '#mppe required,stateless'>>/etc/ppp/options.pptp echo '# }}}'>>/etc/ppp/options.pptp echo "setup di 'UNICAL Campus Access' terminato correttamente" echo "per connettersi eseguire lo script 'UNICAL_Campus_Access.sh' " and the second: #!/bin/bash echo "Connessione alla Rete del Centro Residenziale in corso attendere........." modprobe ppp_mppe pppd call UNICAL_Campus_Access sleep 30 tail -n 8 /var/log/messages echo "Connessione Stabilita" echo -n "Per terminare la connessione premere invio (in alternativa eseguire il commando 'killall pppd'):----> " read CONN killall pppd echo "Connessione terminata" I've correctly installed network-manager-pptp to the latest version...help?

    Read the article

  • Brainless Backups

    - by Jesse
    I’m a software developer by trade which means to my friends and family I’m just a “computer guy”. It’s assumed that I know everything about every facet of computing from removing spyware to replacing hardware. I also can do all of this blindly over the phone or after hearing a five to ten word description of the problem over dinner ;-) In my position as CIO of my friends and families I’ve been in the unfortunate position of trying to recover music, pictures, or documents off of failed hard drives on more than one occasion. It’s not a great situation for anyone, and it’s always at these times that the importance of backups becomes so clear. Several months back a friend of mine found himself in this situation. The hard drive on his 8 year old laptop failed and took a good number of his digital photos with it. I think most folks can deal with losing some of their music and even some of their documents, but it really stings to lose pictures of past events and loved ones. After ordering a new laptop, my friend went out and bought an external hard drive so that he could start keeping a backup of his data. As fate would have it, several months later the drive in his new laptop failed and he learned the hard way that simply buying the external hard drive isn’t enough… you actually have to copy your stuff over every once in awhile! The importance of backup and recovery plans is (hopefully) well known in IT organizations. Well executed backup plans are in place, and hopefully the backup and recovery process is tested regularly. When you’re talking about users at home, however, the need for these backups is often understood far too late. Most typical users can’t be expected to remember to backup their data regularly and also don’t always have the know-how to setup automated backups. For my friends and family members in this situation I recommend tools like Dropbox, Carbonite, and Mozy. Here’s why I like them: They’re affordable: Dropbox and Mozy both have free offerings, though most people with lots of music and/or photos to backup will probably exceed the storage limitations of those free plans pretty quickly. Still, all three offer pretty affordable monthly or yearly plans. In my opinion, Carbonite’s unlimited storage plan for $50-$60 per year is the best value around. They’re easy to setup: Both Dropbox and Carbonite are very easy to get setup and start using. I’ve never used Mozy, but I imagine it’s similarly painless to get up and running. Backups are automatically “off-site”: A backup that is sitting on an external hard drive right next to your computer is great, but might not protect against flood damage, a power surge, or other disasters in that single location. These services exist “in the cloud” so to speak, helping mitigate those concerns. Granted, this kind of backup scheme requires some trust in the 3rd party to protect your data from both malicious people and disastrous events. This truly is a bit of a double edged sword, but I sleep well at night knowing that my data is being backed up and secured by a company made up of engineers that focus on the business of doing backups right. Backups are “brainless”: What I like most about services like these is that they work “automagically” in the background, watching for files to be updated and automatically backing up those changes. There’s no need to remember to plug in that external drive and copy your data over. Since starting to recommend these services to my friends and family I find myself wearing my “data recovery” hat far less often. The only way backups are effective for your standard computer user is if they’re completely automatic. Backups need to be brainless, or they just won’t work.

    Read the article

  • MvcExtensions - ActionFilter

    - by kazimanzurrashid
    One of the thing that people often complains is dependency injection in Action Filters. Since the standard way of applying action filters is to either decorate the Controller or the Action methods, there is no way you can inject dependencies in the action filter constructors. There are quite a few posts on this subject, which shows the property injection with a custom action invoker, but all of them suffers from the same small bug (you will find the BuildUp is called more than once if the filter implements multiple interface e.g. both IActionFilter and IResultFilter). The MvcExtensions supports both property injection as well as fluent filter configuration api. There are a number of benefits of this fluent filter configuration api over the regular attribute based filter decoration. You can pass your dependencies in the constructor rather than property. Lets say, you want to create an action filter which will update the User Last Activity Date, you can create a filter like the following: public class UpdateUserLastActivityAttribute : FilterAttribute, IResultFilter { public UpdateUserLastActivityAttribute(IUserService userService) { Check.Argument.IsNotNull(userService, "userService"); UserService = userService; } public IUserService UserService { get; private set; } public void OnResultExecuting(ResultExecutingContext filterContext) { // Do nothing, just sleep. } public void OnResultExecuted(ResultExecutedContext filterContext) { Check.Argument.IsNotNull(filterContext, "filterContext"); string userName = filterContext.HttpContext.User.Identity.IsAuthenticated ? filterContext.HttpContext.User.Identity.Name : null; if (!string.IsNullOrEmpty(userName)) { UserService.UpdateLastActivity(userName); } } } As you can see, it is nothing different than a regular filter except that we are passing the dependency in the constructor. Next, we have to configure this filter for which Controller/Action methods will execute: public class ConfigureFilters : ConfigureFiltersBase { protected override void Configure(IFilterRegistry registry) { registry.Register<HomeController, UpdateUserLastActivityAttribute>(); } } You can register more than one filter for the same Controller/Action Methods: registry.Register<HomeController, UpdateUserLastActivityAttribute, CompressAttribute>(); You can register the filters for a specific Action method instead of the whole controller: registry.Register<HomeController, UpdateUserLastActivityAttribute, CompressAttribute>(c => c.Index()); You can even set various properties of the filter: registry.Register<ControlPanelController, CustomAuthorizeAttribute>( attribute => { attribute.AllowedRole = Role.Administrator; }); The Fluent Filter registration also reduces the number of base controllers in your application. It is very common that we create a base controller and decorate it with action filters and then we create concrete controller(s) so that the base controllers action filters are also executed in the concrete controller. You can do the  same with a single line statement with the fluent filter registration: Registering the Filters for All Controllers: registry.Register<ElmahHandleErrorAttribute>(new TypeCatalogBuilder().Add(GetType().Assembly).Include(type => typeof(Controller).IsAssignableFrom(type))); Registering Filters for selected Controllers: registry.Register<ElmahHandleErrorAttribute>(new TypeCatalogBuilder().Add(GetType().Assembly).Include(type => typeof(Controller).IsAssignableFrom(type) && (type.Name.StartsWith("Home") || type.Name.StartsWith("Post")))); You can also use the built-in filters in the fluent registration, for example: registry.Register<HomeController, OutputCacheAttribute>(attribute => { attribute.Duration = 60; }); With the fluent filter configuration you can even apply filters to controllers that source code is not available to you (may be the controller is a part of a third part component). That’s it for today, in the next post we will discuss about the Model binding support in MvcExtensions. So stay tuned.

    Read the article

  • Bash completion doesn't work, or is ignoring what I've typed; but works for commands

    - by Neil Traft
    Bash completion seems to be ignoring what I've typed (it tries to complete, but acts as if there's nothing under the cursor). I know I saw it work on this machine earlier today, but I'm not sure what has changed. Some examples: cd shows all directories under my current folder: $ cd co<tab><tab> cmake/ config/ doc/ examples/ include/ programs/ sandbox/ src/ .svn/ tests/ Commands like ls and less show all files and directories under my current folder: $ ls co<tab><tab> cmake/ config/ .cproject Doxyfile.in include/ programs/ README.txt src/ tests/ CMakeLists.txt COPYING.txt doc/ examples/ mainpage.dox .project sandbox/ .svn/ Even when I try to complete things from a different folder, it gives me only the results for my current folder (telling me that it is completely ignoring what I've typed): $ cd ~/D<tab><tab> cmake/ config/ doc/ examples/ include/ programs/ sandbox/ src/ .svn/ tests/ But it seems to be working fine for commands and variables: $ if<tab><tab> if ifconfig ifdown ifnames ifquery ifup $ echo $P<tab><tab> $PATH $PIPESTATUS $PPID $PS1 $PS2 $PS4 $PWD $PYTHONPATH I do have this bit in my .bashrc, and I have confirmed that my .bashrc is indeed getting sourced: if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi I've even tried manually executing that file, but it doesn't fix the problem: $ . /etc/bash_completion There was even one point in time where it was working for ls, but was not working for cd ... but I can't replicate that result now. Update: I also just discovered that I have terminals open from earlier that still work. I ran source .bashrc in one of them and afterwards completion was broken. Here is my .bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # # Modified by Neil Traft #source ~/.profile # Allow globs to expand hidden files shopt -s dotglob nullglob # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines or lines starting with space in the history. # See bash(1) for more options HISTCONTROL=ignoreboth # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # If set, the pattern "**" used in a pathname expansion context will # match all files and zero or more directories and subdirectories. #shopt -s globstar # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # Color the prompt export PS1="\[$(tput setaf 2)\]\u@\h:\[$(tput setaf 5)\]\W\[$(tput setaf 2)\] $\[$(tput sgr0)\] " # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi

    Read the article

  • Change The Windows 7 Start Orb the Easy Way

    - by Matthew Guay
    Want to make your Windows 7 PC even more unique and personalized?  Then check out this easy guide on how to change your start orb in Windows 7. Getting Started First, download the free Windows 7 Start Button Changer (link below), and extract the contents of the folder.  It contains the app along with a selection of alternate start button orbs you can try out.   Before changing the start button, we advise creating a system restore point in case anything goes wrong.  Enter System Restore in your Start menu search, and select “Create a restore point”. Please note:  We tested this on both the 32 bit and 64 bit editions of Windows 7, and didn’t encounter any problems or stability issues.  That said, it is always prudent to make a restore point just in case a problem did happen. Click the Create button… Then enter a name for the restore point, and click Create. Changing the Start Orb. Once this is finished, run the Windows 7 Start Button Changer as administrator by right-clicking on it and selecting “Run as administrator”.  Accept the UAC prompt that will appear. If you don’t run it as an administrator, you may see the following warning.  Click Quit, and then run again as administrator. You should now see the Windows 7 Start Button Changer.  On the left it shows what your current (default) start orb looks like inactive, when hovered over, and when selected.  Click the orb on the right to select a new start button. Here we browsed to the sample orbs folder, and selected one of them.  Let’s give Windows the Media Center orb for a start orb.  Click the orb you want, and then select open. When you click Open, your screen will momentarily freeze and your taskbar will disappear.  When it reappears, your computer will have gone from having the old, default Start orb style… …to your new, exciting Start orb!  Here it is default, and glowing when hovered over. Now, the Windows 7 Start Orb Changer will change, and show your new Start orb on the left side.  If you would like to revert to the default orb, simply click the folder icon to restore it.  Or, if you would like to change the orb again, restore the original first and then select a new one. The orbs don’t have to be round; here’s a fancy Windows 7 logo as the start button. The start orb change will work in the Aero and Aero basic (which Windows 7 Start uses) themes, but will not show up in the classic, Windows 2000 style themes.  Here’s how the new start button looks with the Aero Classic theme: There are tons of orbs available, including this cute smiley, so choose one that you like to make your computer uniquely yours. Conclusion This is a cute way to make your desktop unique, and can be a great way to make a truly personalized theme.  Let us know your favorite Start orb! Link Download the Windows 7 Start Button Changer Find more Start orbs at deviantART Similar Articles Productive Geek Tips Change the Windows 7 or Vista Power Buttons to Shut Down/Sleep/HibernateQuick Tip: Change the Registered Owner in WindowsSpeed up Windows Vista Start Menu Search By Limiting ResultsWhy Does My Password Expire in Windows?Change Your Computer Name in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition

    Read the article

  • Windows Phone 8, possible tablets and what the latest update might mean

    - by Roger Hart
    Microsoft have just announced an update to Windows Phone 8. As one of the five, maybe six people who actually bought a WP8 handset I found this interesting. Then I read the blog post about it, and rushed off to write somewhat less than a thousand words about a single picture. The blog post announces an extra column of tiles on the start screen, and support for higher resolutions. If we ignore all the usual flummery about how this will make your life better, that (and the rotation lock) sounds a little like stage setting for tablets. Looking at the preview screenshot, I started to wonder. What it’s called Phablet_5F00_StartScreenProductivity_5F00_01_5F00_072A1240.jpg Pretty conclusive. If you can brand something a “phablet” and sleep at night you’re made of sterner stuff than I am, but that’s beside the point. It’s explicit in the post that Microsoft are expecting a broader range of form factors for WP8, but they stop short of quite calling out tablet size. The extra columns and resolution definitely back that up, so why stop at a 6 inch “phablet”? Sadly, the string of numbers there don’t really look like a Lumia model number – that would be a bit tendentious even for a speculative blog post about a single screenshot. “Productivity” is interesting too. I get into this a bit more below, but this is a pretty clear pitch for a business device. What it looks like Something that would look quite decent on a 7 inch screen, but something a bit too vertical to go toe-to-toe with the Surface. Certainly, it would look a lot better on a large-factor phone than any of the current models. Those tiles are going to get cramped and a bit ugly if the handsets aren’t getting bigger. What’s on it You have a bunch of missed calls, you rarely text, use a stocks app, and your budget spreadsheet and meeting notes are a thumb-reach away. Outlook is your main form of email. You care enough about LinkedIn to not only install its app but give it a huge live tile. There’s no beating about the bush here, the implicit persona is a corporate exec. With Nokia in the bag and Blackberry pushing daisies, that may not be a stupid play. There’s almost certainly a niche there if they can parlay their corporate credentials into filling it before BYOD (which functionally means an iPhone) reaches the late adopters. The really quite slick WP8 Office implementation ought to help here. This is the face they’ve chosen to present, the cultural milieu they’re normalizing for Windows Phone. It’s an iPhone for Serious Business Grown-ups. Could work, I guess. Does it mean anything? Is the latest WP8 update a sign that we can expect to see tablets running Windows Phone rather than WinRT? Well, WinRT tablets haven’t exactly taken off but I’m not quite going to make a leap like that just from a file name and a column of icons. I feel pretty safe, however, conjecturing that Microsoft would like to squeeze a WP8 “phablet” into the palm of every exec who’s ever grumbled about their Blackberry, and this release might get them a bit closer. If it works well incrementing up to larger devices, then that could be a fair hedge against WinRt crashing and burning any harder in the marketplace.

    Read the article

  • Determining explosion radius damage - Circle to Rectangle 2D

    - by Paul Renton
    One of the Cocos2D games I am working on has circular explosion effects. These explosion effects need to deal a percentage of their set maximum damage to all game characters (represented by rectangular bounding boxes as the objects in question are tanks) within the explosion radius. So this boils down to circle to rectangle collision and how far away the circle's radius is from the closest rectangle edge. I took a stab at figuring this out last night, but I believe there may be a better way. In particular, I don't know the best way to determine what percentage of damage to apply based on the distance calculated. Note : All tank objects have an anchor point of (0,0) so position is according to bottom left corner of bounding box. Explosion point is the center point of the circular explosion. TankObject * tank = (TankObject*) gameSprite; float distanceFromExplosionCenter; // IMPORTANT :: All GameCharacter have an assumed (0,0) anchor if (explosionPoint.x < tank.position.x) { // Explosion to WEST of tank if (explosionPoint.y <= tank.position.y) { //Explosion SOUTHWEST distanceFromExplosionCenter = ccpDistance(explosionPoint, tank.position); } else if (explosionPoint.y >= (tank.position.y + tank.contentSize.height)) { // Explosion NORTHWEST distanceFromExplosionCenter = ccpDistance(explosionPoint, ccp(tank.position.x, tank.position.y + tank.contentSize.height)); } else { // Exp center's y is between bottom and top corner of rect distanceFromExplosionCenter = tank.position.x - explosionPoint.x; } // end if } else if (explosionPoint.x > (tank.position.x + tank.contentSize.width)) { // Explosion to EAST of tank if (explosionPoint.y <= tank.position.y) { //Explosion SOUTHEAST distanceFromExplosionCenter = ccpDistance(explosionPoint, ccp(tank.position.x + tank.contentSize.width, tank.position.y)); } else if (explosionPoint.y >= (tank.position.y + tank.contentSize.height)) { // Explosion NORTHEAST distanceFromExplosionCenter = ccpDistance(explosionPoint, ccp(tank.position.x + tank.contentSize.width, tank.position.y + tank.contentSize.height)); } else { // Exp center's y is between bottom and top corner of rect distanceFromExplosionCenter = explosionPoint.x - (tank.position.x + tank.contentSize.width); } // end if } else { // Tank is either north or south and is inbetween left and right corner of rect if (explosionPoint.y < tank.position.y) { // Explosion is South distanceFromExplosionCenter = tank.position.y - explosionPoint.y; } else { // Explosion is North distanceFromExplosionCenter = explosionPoint.y - (tank.position.y + tank.contentSize.height); } // end if } // end outer if if (distanceFromExplosionCenter < explosionRadius) { /* Collision :: Smaller distance larger the damage */ int damageToApply; if (self.directHit) { damageToApply = self.explosionMaxDamage + self.directHitBonusDamage; [tank takeDamageAndAdjustHealthBar:damageToApply]; CCLOG(@"Explsoion-> DIRECT HIT with total damage %d", damageToApply); } else { // TODO adjust this... turning out negative for some reason... damageToApply = (1 - (distanceFromExplosionCenter/explosionRadius) * explosionMaxDamage); [tank takeDamageAndAdjustHealthBar:damageToApply]; CCLOG(@"Explosion-> Non direct hit collision with tank"); CCLOG(@"Damage to apply is %d", damageToApply); } // end if } else { CCLOG(@"Explosion-> Explosion distance is larger than explosion radius"); } // end if } // end if Questions: 1) Can this circle to rect collision algorithm be done better? Do I have too many checks? 2) How to calculate the percentage based damage? My current method generates negative numbers occasionally and I don't understand why (Maybe I need more sleep!). But, in my if statement, I ask if distance < explosion radius. When control goes through, distance/radius must be < 1 right? So 1 - that intermediate calculation should not be negative. Appreciate any help/advice!

    Read the article

  • Enable grub boot menu on new system

    - by Remus Rigo
    I have installed Ubuntu 11.04 and I would like to see the boot menu when the system starts (by default it is hidden or the timeout=0) # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 insmod jpeg if background_image /boot/grub/boot.jpg; then true else set menu_color_normal=white/black set menu_color_highlight=black/light-gray fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 linux /boot/vmlinuz-2.6.38-8-generic root=UUID=44f311b4-0b40-4d10-b004-78108539fc39 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic } menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 echo 'Loading Linux 2.6.38-8-generic ...' linux /boot/vmlinuz-2.6.38-8-generic root=UUID=44f311b4-0b40-4d10-b004-78108539fc39 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

    Read the article

  • If not now, then when?

    - by Chris Gardner
    Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/10/25/if-not-now-then-when.aspx The time has been flying by this year. It seems like only yesterday that I mentioned the gorillagator, a simple construct of confusion to try to draw attention to my message. In reality, that message was sent over a month ago. During that time, the hours slipped to days and days to weeks. Many exciting things have happened to myself; I'm sure many exciting things have happened to you. I'm also sure that many terrifying things have happened to children and their families. 62 children enter treatment at a Children's Miracle Network Hospital every minute. That's nearly 60,000 children since I sent the last email. To put that number in perspective, that is more than the population of Greenland. If we expand that to the past year, they have been nearly 550,000 children treated. That is almost the population of Huntsville, Decatur, and all their suburbs combined. Over the past 4 years, I have raised a little more than $3,000 for Children's Hospital of Alabama. As a result, I received a call from the organizers of Extra Life thanking me for my dedicated work and informing me that I was the top supporters for Children's Hospital of Alabama ... with my measly three grand. We can do much better than that. It may sound like I'm trying to have fun by playing games for 24 hours. It is more than that. It is me using my time and body as a catalyst. It is me putting my passion to work for a cause. It is me turning my love into something tangible. I have been campaigning and fighting to give these children a chance for years. I have been asking you to help me support these children and families. I've been putting in countless hours of talking to people, impassioned emails, and carefully constructed tweets. I have been fighting with cutting edge, and sometimes expensive, technology to try to provide live streams of my marathons. I yearly put my body through 24 (and, this year, 25) hours of no sleep. I do this to represent the countless hours these families sit awake at their children's side. All I ask is a few minutes on a website and a few dollars. These few minutes and few dollars go a long way help people that are experiencing circumstances that only occur in our nightmares. I also ask that you take one extra step. Forward this plea to those that you know. I can only reach a small fraction of a percentage of the people that may be able to help. Together, we can reach the world. I raise money for Children's Hospital of Alabama. As this message branches out, people may wish to support a hospital closer to their area. I have included a link to the list of people that have dedicated their time and have received no donations. Find someone on the list supporting your local hospital and give them a donation. Let them know that their time and effort are appreciated. Together, we can do something great. Together, we can make a difference. Together, we all stand tall. Thank you. You can get more information at http://www.extra-life.org and http://childrensmiraclenetworkhospitals.org/" My donation page is http://www.extra-life.org/participant/cgardner The list of participants without donations is http://www.extra-life.org/index.cfm?fuseaction=donorDrive.eventParticipantList&page=629&eventID=512

    Read the article

  • How to recover after embarrassing yourself and your company?

    - by gaearon
    I work in an outsourcing company in Russia, and one of our clients is a financial company located in USA. For the last six months I have been working on several projects for this particular company, and as I was being assigned a larger project, I was invited to work onsite in USA in order to understand and learn the new system. Things didn't work out as well as I hoped because the environment was messy after original developers, and I had to spent quite some time to understand the quirks. However we managed to do the release several days ago, and it looks like everything's going pretty smooth. From technical perspective, my client seems to be happy with me. My solutions seem to work, and I always try to add some spark of creativity to what I do. However I'm very disorganized in a certain sense, as I believe many of you fellas are. Let me note that my current job is my first job ever, and I was lucky enough to get a job with flexible schedule, meaning I can come in and out of the office whenever I want as long as I have 40 hours a week filled. Sometimes I want to hang out with friends in the evening, and days after that I like to have a good sleep in the morning—this is why flexible schedule (or lack of one) is ideal fit for me. [I just realized this paragraph looks too serious, I should've decorated it with some UNICORNS!] Of course, after coming to the USA, things changed. This is not some software company with special treatment for the nerdy ones. Here you have to get up at 7:30 AM to get to the office by 9 AM and then sit through till 5 PM. Personally, I hate waking up in the morning, not to say my productivity begins to climb no sooner than at 5 o'clock, i.e. I'm very slow until I have to go, which is ironic. Sometimes I even stay for more than 8 hours just to finish my current stuff without interruptions. Anyway, I could deal with that. After all, they are paying for my trip, who am I to complain? They need me to be in their working hours to be able to discuss stuff. It makes perfect sense that fixed schedule doesn't make any sense for me. But it does makes sense that it does make sense for my client. And I am here for client, therefore sense is transferred. Awww, you got it. I was asked several times to come exactly at 9 AM but out of laziness and arrogance I didn't take these requests seriously enough. This paid off in the end—on my last day I woke up 10 minutes before final status meeting with business owner, having overslept previous day as well. Of course this made several people mad, including my client, as I ignored his direct request to come in time for two days in the row, including my final day. Of course, I didn't do it deliberately but certainly I could've ensured that I have at least two alarms to wake me up, et cetera...I didn't do that. He also emailed my boss, calling my behavior ridiculous and embarrassing for my company and saying “he's not happy with my professionalism at all”. My boss told me that “the system must work both in and out” and suggested me to stay till late night this day working in a berserker mode, fixing as many issues as possible, and sending a status email to my client. So I did, but I didn't receive the response yet. These are my questions to the great programmers community: Did you have situations where your ignorance and personal non-technical faults created problems for your company? Were you able to make up for your fault and stay in a good relationship with your client or boss? How? How would you act if you were in my situation?

    Read the article

  • what is the best way to use loops to detect events while the main loop is running?

    - by yao jiang
    I am making an "game" that has pathfinding using pygame. I am using Astar algo. I have a main loop which draws the whole map. In the loop I check for events. If user press "enter" or "space", random start and end are selected, then animation starts and it will try to get from start to end. My draw function is stupid as hell right now, it works as expected but I feel that I am doing it wrong. It'll draw everything to the end of the animation. I am also detecting events in there as well. What is a better way of implementing the draw function such that it will draw one "step" at a time while checking for events? animating = False; while loop: check events: if not animating: # space or enter press will choose random start/end coords if enter_pressed or space_pressed: start, end = choose_coords route = find_route(start, end) draw(start, end, grid, route) else: # left click == generate an event to block the path # right click == user can choose a new destination if left_mouse_click: gen_event() reroute() elif right_mouse_click: new_end = new_end() new_start = current_pos() route = find_route(new_start, new_end) draw(new_start, new_end, grid, route) # draw out the grid def draw(start, end, grid, route_coord): # draw the end coords color = red; pick_image(screen, color, width*end[1],height*end[0]); pygame.display.flip(); # then draw the rest of the route for i in range(len(route_coord)): # pausing because we want animation time.sleep(speed); # get the x/y coords x,y = route_coord[i]; event_on = False; if grid[x][y] == 2: color = green; elif grid[x][y] == 3: color = blue; for event in pygame.event.get(): if event.type == pygame.MOUSEBUTTONDOWN: if event.button == 3: print "destination change detected, rerouting"; # get mouse position, px coords pos = pygame.mouse.get_pos(); # get grid coord c = pos[0] // width; r = pos[1] // height; grid[r][c] = 4; end = [r, c]; elif event.button == 1: print "user generated event"; pos = pygame.mouse.get_pos(); # get grid coord c = pos[0] // width; r = pos[1] // height; # mark it as a block for now grid[r][c] = 1; event_on = True; if check_events([x,y]) or event_on: # there is an event # mark it as a block for now grid[y][x] = 1; pick_image(screen, event_x, width*y, height*x); pygame.display.flip(); # then find a new route new_start = route_coord[i-1]; marked_grid, route_coord = find_route(new_start, end, grid); draw(new_start, end, grid, route_coord); return; # just end draw here so it wont throw the "index out of range" error elif grid[x][y] == 4: color = red; pick_image(screen, color, width*y, height*x); pygame.display.flip(); # clear route coord list, otherwise itll just add more unwanted coords route_coord_list[:] = [];

    Read the article

  • Hardware wireless switch has no effect after suspend and 13.10 upgrade

    - by blaineh
    This seems to be a fairly chronic problem, as shown by the following questions: How do I fix a "Wireless is disabled by hardware switch" error? Wireless disabled by hardware switch "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this? but no good solutions have been found! Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. All My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A ip=155.99.215.79 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. xev shows that no internal event is triggered for my wireless switch (f12), but other function keys also acting as hardware switches work fine. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. I just tried to reload bios defaults (or something) as shown by this video. Didn't work. Edit. I tried the contents of this answer, and it didn't work. Edit. I made a pastebin of dmesg. I couldn't even begin to understand the contents. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

    Read the article

  • Why Is Hibernation Still Used?

    - by Jason Fitzpatrick
    With the increased prevalence of fast solid-state hard drives, why do we still have system hibernation? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Moses wants to know why he should use hibernate on a desktop machine: I’ve never quite understood the original purpose of the Hibernation power state in Windows. I understand how it works, what processes take place, and what happens when you boot back up from Hibernate, but I’ve never truly understood why it’s used. With today’s technology, most notably with SSDs, RAM and CPUs becoming faster and faster, a cold boot on a clean/efficient Windows installation can be pretty fast (for some people, mere seconds from pushing the power button). Standby is even faster, sometimes instantaneous. Even SATA drives from 5-6 years ago can accomplish these fast boot times. Hibernation seems pointless to me [on desktop computers] when modern technology is considered, but perhaps there are applications that I’m not considering. What was the original purpose behind hibernation, and why do people still use it? Quite a few people use hibernate, so what is Moses missing in the big picture? The Answer SuperUser contributor Vignesh4304 writes: Normally hibernate mode saves your computer’s memory, this includes for example open documents and running applications, to your hard disk and shuts down the computer, it uses zero power. Once the computer is powered back on, it will resume everything where you left off. You can use this mode if you won’t be using the laptop/desktop for an extended period of time, and you don’t want to close your documents. Simple Usage And Purpose: Save electric power and resuming of documents. In simple terms this comment serves nice e.g (i.e. you will sleep but your memories are still present). Why it’s used: Let me describe one sample scenario. Imagine your battery is low on power in your laptop, and you are working on important projects on your machine. You can switch to hibernate mode – it will result your documents being saved, and when you power on, the actual state of application gets restored. Its main usage is like an emergency shutdown with an auto-resume of your documents. MagicAndre1981 highlights the reason we use hibernate everyday: Because it saves the status of all running programs. I leave all my programs open and can resume working the next day very easily. Doing a real boot would require to start all programs again, load all the same files into those programs, get to the same place that I was at before, and put all my windows in exactly the same place. Hibernating saves a lot of work pulling these things back up again. It’s not unusual to find computers around the office here that have been hibernated day in and day out for months without an actual full system shutdown and restart. It’s enormously convenient to freeze your work space at the exact moment you stopped working and to turn right around and resume there the next morning. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

    Read the article

  • Why don't we just fix Javascript?

    - by Jan Meyer
    Javascript sucks because of a few fatalities well pointed out by Douglas Crockford. We talk a lot about it. But the point here is, why we don't fix it? Coffeescript of course does that and a lot more. But the question here is another: if we provide a webservice that can convert one version of Javascript to the next, and so on, we can keep the language up to date. Such a conversion allows old code to run, albeit with an ever-increasing startup delay, as newer browsers convert old code to the new syntax. To avoid that delay, the site only needs to take the output of the code-transform and paste it in! The effort has immediate benefits for those businesses interested in the results. The rest can sleep tight: their code will continue to run. If we provide backward code-transformation also, then elder browsers can also run ANY new code! Migration scripts should be created by those that make changes to a language. Today they don't, which is in itself a fundamental omission! It should be am obvious part of their job to provide them, as their job isn't really done without them. The onus of making it work should be on them. With this system Any site will be able to run in Any browser, but new code will run best on the newest browsers. This way we reap the benefit of an up-to-date and productive development environment, where today we suffer, supposedly because of yesterday. This is a misconception. We are all trapped in committee-thinking, and we drag along things that only worsen our performance over time! We cause an ever increasing complexity that is hard to underestimate. Javascript is easily fixed. The fact is we don't. As an example, I have seen Patrick Michaud tackle the migration problem in PmWiki. It included forward migration scripts. Whenever syntax changes were made, a migration script was added to transform pages to the new syntax. As far as I know, ALL migrations have worked flawlessly. In other words, we don't tackle the migration problem, we just drag it along. We are incompetent! And why is that? Because technically incompetent people feel they must decide for us. Because they are incompetent, fear rules them. They are obnoxiously conservative, and we suffer the consequence of bad leadership. But the competent don't need to play by the same rules. They can (and must) change them. They are the path forward. It is about time to leave the past behind, and pursue the leanest meanest, no, eternal functionality. That would in and of itself revolutionize programming. So, why don't we stop whining and fix programming? Begin with Javascript and change the world. Even if the browser doesn't hook into this system, coders could. So language updaters should take it upon them to provide migration scripts. Once they exist, browsers may take advantage of them.

    Read the article

  • Controlling soft errors and false alarms in SSIS

    - by Jim Giercyk
    If you are like me, you dread the 3AM wake-up call.  I would say that the majority of the pages I get are false alarms.  The alerts that require action often require me to open an SSIS package, see where the trouble is and try to identify the offending data.  That can be very time-consuming and can take quite a chunk out of my beauty sleep.  For those reasons, I have developed a simple error handling scenario for SSIS which allows me to rest a little easier.  Let me first say, this is a high level discussion; getting into the nuts and bolts of creating each shape is outside the scope of this document, but if you have an average understanding of SSIS, you should have no problem following along. In the Data Flow above you can see that there is a caution triangle.  For the purpose of this discussion I am creating a truncation error to demonstrate the process, so this is to be expected.  The first thing we need to do is to redirect the error output.  Double-clicking on the Query shape presents us with the properties window for the input.  Simply set the columns that you want to redirect to Redirect Row in the dropdown box and hit Apply. Without going into a dissertation on error handling, I will just note that you can decide which errors you want to redirect on Error and on Truncation.  Therefore, to override this process for a column or condition, simply do not redirect that column or condition. The next thing we want to do is to add some information about the error; specifically, the name of the package which encountered the error and which step in the package wrote the record to the error table.  REMEMBER: If you redirect the error output, your package will not fail, so you will not know where the error record was created without some additional information.    I added 3 columns to my error record; Severity, Package Name and Step Name.  Severity is just a free-form column that you can use to note whether an error is fatal, whether the package is part of a test job and should be ignored, etc.  Package Name and Step Name are system variables. In my package I have created a truncation situation, where the firstname column is 50 characters in the input, but only 4 characters in the output.  Some records will pass without truncation, others will be sent to the error output.  However, the package will not fail. We can see that of the 14 input rows, 8 were redirected to the error table. This information can be used by another step or another scheduled process or triggered to determine whether an error should be sent.  It can also be used as a historical record of the errors that are encountered over time.  There are other system variables that might make more sense in your infrastructure, so try different things.  Date and time seem like something you would want in your output for example.  In summary, we have redirected the error output from an input, added derived columns with information about the errors, and inserted the information and the offending data into an error table.  The error table information can be used by another step or process to determine, based on the error information, what level alert must be sent.  This will eliminate false alarms, and give you a head start when a genuine error occurs.

    Read the article

  • Teminal non-responsive on load, can't enter anything until CTRL+C

    - by Silver Light
    Hello! I have an issue with terminal in Ubuntu 10.04. When I launch it, it hangs, like this: I cannot do anything until I press CTRL+C: I cannot remember when this started. What can be wrong? Looks like teminal is loading or processing something each time it loads. How can I diagnose and solve this problem? EDIT: Here are the conents of ~/.bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt #force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi # Source .profile if [ -f ~/.profile ]; then . ~/.profile fi Setting -x at the beginning showed me that it tries to repeat this without stopping: +++++++++++++++++++ '[' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' '!=' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' ']' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line=' acroread gpdf xpdf' +++++++++++++++++++ list=("${list[@]}" $line) +++++++++++++++++++ read line

    Read the article

  • Is the Internet Making us Smarter or Not?

    - by BuckWoody
    I’ve been reading recently about an exchange among some very bright folks, some who posit that the Internet with its instant-on, sometimes-right, big-statement-wins mentality is making people think in a more shallow way, teaching us to rely on others as experts and diluting our logical thought process. Others state that it broadens our perspective and extends our mental reach. Whenever I see this kind of exchange on two ends of a spectrum, I begin to wonder if both sides might be correct.   I can certainly say that I have changed my way of learning, reading, and social interactions because of the Internet. And my tolerance for reading long missives has indeed gone down. I tend to (mentally and literally) “bookmark” things I never seem to have time to get back to. But I also agree that I’ve been exposed to thoughts, ideas and people I never would have encountered any other way. So how to deal with this dichotomy?   Well, I’m going to go off and think about it. No, I’m really going to go off for a full week to a cabin I’ve rented in a National Forest in the Midwest. It has no indoor plumbing, phones, Internet connections or anything else – only a bed to sleep in and a place to cook a little. I’m taking one book, some paper, and a guitar with me and that’s it. I plan to spend my days walking, reading a little, playing a little on the guitar, but mostly just thinking. Those of you who know me might find this unusual. I’m an always-on, hyper-caffeinated, overly-busy, connected person. I haven’t taken a vacation in five years, at least for more than two or three days at a time. Even then, I keep us on the move constantly – our vacations aren’t cruises or anything like that. I check e-mail, post and all that. When I’m not on vacation, I live with and leverage lots of technology, and work with those that do the same. This, however, is a really “unplugged” event, and I’m hoping that it will let me unpack the things I’ve been stuffing in my head. I plan to spend a lot of time on a single subject, writing notes, thinking, and writing more notes.   So after I post tomorrow's “quote of the day” I’ll be “going dark” for a week. No twitter, FaceBook, LinkedIn, e-mail, chat, none of my five blogs will get updated, and I’ll have to turn in my two articles for InformIT.com early. I won’t have access to my college class portal, so my students will be without me for a week. I will really be offline. I’ll see you in a week – hopefully a little more educated. See you then.   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Is the Internet Making us Smarter or Not?

    - by BuckWoody
    I’ve been reading recently about an exchange among some very bright folks, some who posit that the Internet with its instant-on, sometimes-right, big-statement-wins mentality is making people think in a more shallow way, teaching us to rely on others as experts and diluting our logical thought process. Others state that it broadens our perspective and extends our mental reach. Whenever I see this kind of exchange on two ends of a spectrum, I begin to wonder if both sides might be correct.   I can certainly say that I have changed my way of learning, reading, and social interactions because of the Internet. And my tolerance for reading long missives has indeed gone down. I tend to (mentally and literally) “bookmark” things I never seem to have time to get back to. But I also agree that I’ve been exposed to thoughts, ideas and people I never would have encountered any other way. So how to deal with this dichotomy?   Well, I’m going to go off and think about it. No, I’m really going to go off for a full week to a cabin I’ve rented in a National Forest in the Midwest. It has no indoor plumbing, phones, Internet connections or anything else – only a bed to sleep in and a place to cook a little. I’m taking one book, some paper, and a guitar with me and that’s it. I plan to spend my days walking, reading a little, playing a little on the guitar, but mostly just thinking. Those of you who know me might find this unusual. I’m an always-on, hyper-caffeinated, overly-busy, connected person. I haven’t taken a vacation in five years, at least for more than two or three days at a time. Even then, I keep us on the move constantly – our vacations aren’t cruises or anything like that. I check e-mail, post and all that. When I’m not on vacation, I live with and leverage lots of technology, and work with those that do the same. This, however, is a really “unplugged” event, and I’m hoping that it will let me unpack the things I’ve been stuffing in my head. I plan to spend a lot of time on a single subject, writing notes, thinking, and writing more notes.   So after I post tomorrow's “quote of the day” I’ll be “going dark” for a week. No twitter, FaceBook, LinkedIn, e-mail, chat, none of my five blogs will get updated, and I’ll have to turn in my two articles for InformIT.com early. I won’t have access to my college class portal, so my students will be without me for a week. I will really be offline. I’ll see you in a week – hopefully a little more educated. See you then.   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Teminal hands on load, can't enter anything until CTRL+C

    - by Silver Light
    Hello! I have an issue with terminal in Ubuntu 10.04. When I launch it, it hangs, like this: I cannot do anything until I press CTRL+C: I cannot remember when this started. What can be wrong? Looks like teminal is loading or processing something each time it loads. How can I diagnose and solve this problem? EDIT: Here are the conents of ~/.bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt #force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi # Source .profile if [ -f ~/.profile ]; then . ~/.profile fi Setting -x at the beginning showed me that it tries to repeat this without stopping: +++++++++++++++++++ '[' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' '!=' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' ']' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line=' acroread gpdf xpdf' +++++++++++++++++++ list=("${list[@]}" $line) +++++++++++++++++++ read line

    Read the article

  • Top Three Reasons to Move to the Cloud Before Your Next Upgrade

    - by yaldahhakim
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} 1) Reduced Cost - During major upgrades, most organizations typically need to replace or invest in extra hardware and other IT resources to support the upgrade. With the Cloud, this can become more of an Op-ex discussion. The flexibility and scalability of the cloud also allows for new business solution to be set up more quickly with the ability to scale IT resources to closely map to changing business requirements. . This enables more and faster innovation because you are spending money to focus on core business initiatives instead of setting up complex environments. 2) Reduced Risk- This is especially true when you are working with a cloud provider that possesses substantial in-house expertise. Oracle Managed Cloud Services has been hosting and managing customer’s business applications for over a decade and has help hundreds of customers upgrade and adopt new technologies faster and better. Customer have access to over 15,000 Oracle experts in operation centers around the world that can work around the clock and have direct access Oracle Development to optimize our customers’ upgrade experience. 3) Reduced Downtime - Whether a customer is looking to upgrade their E-Business Suite, PeopleSoft, JD-Edwards, or Fusion applications, we’ve developed standardized best practices and tools across the technology stack to accelerate the upgrade and migration with substantially reduced timelines and risk. And because the process is repeatable, customer stay more current on the latest releases, continuously taking advantage of the newest innovations – without the headache.. By leveraging the economies and expertise of scale that belong to Oracle, you can sleep better at night knowing that your next major application upgrade is taken care of. Check out the video of this Managed Cloud Services customer to learn more about their experience.

    Read the article

  • Free hosting solution for a very low-traffic website [duplicate]

    - by user966939
    This question already has an answer here: How to find web hosting that meets my requirements? 4 answers I run a very low-traffic website (about 40 users, basically all of which are daily active on the site). I don't see it changing anytime soon either, as there is no way to sign up on the site right now. Until now I have just been using a sub-directory on a friend's host (shared), to host the web site. But in only a few weeks from now, his subscription will end, and he has no plans on renewing it. So of course this means I'll have to move on to something else. But I don't think I'll find someone who'd be willing to share a... shared host with me again. And besides, the software used on that server is ancient (PHP 4.4.9 + MySQL 4.1.22). There's one obvious solution that comes to mind, I guess: choose a better host and pay for it myself. The problem here is that I have no real fixed income, as I'm only a student. So even if the pricing is dirt cheap, I just can't be certain I will be able to afford it, every single month, for... at least 2 years maybe? So I've looked at free hosting solutions instead. The least requirement I had was that it was completely free of ads. But no matter where I look, I always find something in a corner or two ("what can you expect from a free host?" - yeah I know, but I guess it was worth a shot). For example, on Byethost (one of the free hosts I tried), if you trigger a PHP error while error reporting is set to E_ALL, you will spawn some hidden ad... Besides Byethost, I've tried 000Webhost, x10Hosting, 2Freehosting/1Freehosting, Wink.ws, and they are only worse. Okay, I'm running low on ideas. But! What if I just hosted the site myself, on my own computer? That could work. I actually do have my computer on practically 24/7. But not really. Sometimes I need to reboot it, and sometimes we even have power outages. And what if the hardware needs an upgrade? It's not such a big deal for me if the site went down, because I know what's going on; but what about the users? If I do decide to host it myself, is there some way to show users an alternate page instead of them just seeing a generic "server not found" page in the browser when the site is not accessible? Or is there something I have been missing out on? Is there a different kind of "web hosting" solution out there that I haven't heard of? Here is what I'm really looking for: Free (as in, no costs) NO ads Bandwidth enough for a low-traffic forum with roughly 40 users (Semi-)Up-to-date PHP and MySQL (at least not older than a year) No standard (non-extension) PHP functions turned off - such as sleep() The mbstring extension is enabled Disk space: at least 5 MB At least one MySQL database Some bonus points would be: Max execution time of PHP scripts can be set Remote access to MySQL database What would be the best solution for me? Is there one?

    Read the article

  • sending sms to mobile from pc using java [closed]

    - by sjohnfernandas
    hi i need to send sms from pc to mobile phone can u people guide me to achieve? i used the following code to send sms to a mobile from pc but i did not get any output and also not getting any error so guide me and point out the mistakes what i have done. package mobilesms; import java.io.; import java.util.; import javax.comm.*; import java.io.IOException; import java.util.Properties; import java.io.InputStream; import java.io.OutputStream; import java.io.DataInputStream; import java.io.FileInputStream; import java.io.DataOutputStream; import java.io.FileOutputStream; public class ReadSimple implements Runnable, SerialPortEventListener { static CommPortIdentifier portId; static Enumeration portList; OutputStream outputstream; InputStream inputStream; SerialPort serialPort; Thread readThread; public static void main(String[] args) { portList = CommPortIdentifier.getPortIdentifiers(); while (portList.hasMoreElements()) { portId = (CommPortIdentifier) portList.nextElement(); if (portId.getPortType() == CommPortIdentifier.PORT_SERIAL) { if (portId.getName().equals("COM1")) { System.out.println("Found port:COM1 "); ReadSimple reader = new ReadSimple(); } } } } public ReadSimple() { try { serialPort = (SerialPort) portId.open("ReadSimpleApp",500); } catch (PortInUseException e) { System.out.println(e); } try { inputStream = serialPort.getInputStream(); OutputStream out=serialPort.getOutputStream(); String line=""; line="AT"+"r\n"; out.write(line.trim().getBytes()); line=""; line="AT+CMGS=7639808583"+"\r\n"; out.write(line.trim().getBytes()); System.out.print(line); line="helloworld"; //line=”ATD 996544325;”+”\r\n”; out.write(line.trim().getBytes()); } catch (IOException e) { serialPort.close(); System.out.println(e); } // catch(InterruptedException E){E.printStackTrace();} try { serialPort.addEventListener(this); } catch (TooManyListenersException e) {System.out.println(e);} serialPort.notifyondataavailable(true); try { serialPort.setSerialPortParams(9600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE); } catch (UnsupportedCommOperationException e) {System.out.println(e);} readThread = new Thread(this); readThread.start(); } public void run() { try { Thread.sleep(200); } catch (InterruptedException e) {System.out.println(e);} } public void serialEvent(SerialPortEvent event) { switch(event.getEventType()) { case SerialPortEvent.BI: case SerialPortEvent.OE: case SerialPortEvent.FE: case SerialPortEvent.PE: case SerialPortEvent.CD: case SerialPortEvent.CTS: case SerialPortEvent.DSR: case SerialPortEvent.RI: case SerialPortEvent.OUTPUT_BUFFER_EMPTY: break; case SerialPortEvent.DATA_AVAILABLE: byte[] readBuffer = new byte[10]; try { while (inputStream.available() 0) { int numBytes = inputStream.read(readBuffer); } System.out.println(new String(readBuffer)); } catch (IOException e) {System.out.println(e);} break; } } }

    Read the article

  • Android Game Development. Async Task. Loading Bitmap Images Sounds

    - by user2534694
    Im working on this game for android. And wanted to know if my thread architecture was right or wrong. Basically, what is happening is, i am loading All the bitmaps,sounds etc in the initializevariables() method. But sometimes the game crashes and sometimes it doesnt. So i decided to use async task. But that doesnt seem to work either (i too loads at times and crashes at times) @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setFullScreen(); initializeVariables(); new initVariables().execute(); // setContentView(ourV); } private void setFullScreen() { requestWindowFeature(Window.FEATURE_NO_TITLE); getWindow().setFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN, WindowManager.LayoutParams.FLAG_FULLSCREEN); getWindow().setFlags(WindowManager.LayoutParams.FLAG_KEEP_SCREEN_ON, WindowManager.LayoutParams.FLAG_KEEP_SCREEN_ON ); } private void initializeVariables() { ourV=new OurView(this); stats = getSharedPreferences(filename, 0); ballPic = BitmapFactory.decodeResource(getResources(), R.drawable.ball5); platform = BitmapFactory.decodeResource(getResources(), R.drawable.platform3); gameB = BitmapFactory.decodeResource(getResources(), R.drawable.game_back2); waves = BitmapFactory.decodeResource(getResources(), R.drawable.waves); play = BitmapFactory.decodeResource(getResources(), R.drawable.play_icon); pause = BitmapFactory.decodeResource(getResources(), R.drawable.pause_icon); platform2 = BitmapFactory.decodeResource(getResources(), R.drawable.platform4); countdown = BitmapFactory.decodeResource(getResources(), R.drawable.countdown); bubbles = BitmapFactory.decodeResource(getResources(), R.drawable.waves_bubbles); backgroundMusic = MediaPlayer.create(this, R.raw.music); jump = MediaPlayer.create(this, R.raw.jump); click = MediaPlayer.create(this, R.raw.jump_crack); sm = (SensorManager) getSystemService(SENSOR_SERVICE); acc = sm.getDefaultSensor(Sensor.TYPE_ACCELEROMETER); sm.registerListener(this, acc, SensorManager.SENSOR_DELAY_GAME); ourV.setOnTouchListener(this); dialog = new Dialog(this,android.R.style.Theme_Translucent_NoTitleBar_Fullscreen); dialog.setContentView(R.layout.pausescreen); dialog.hide(); dialog.setOnDismissListener(this); resume = (Button) dialog.findViewById(R.id.bContinue); menu = (Button) dialog.findViewById(R.id.bMainMenu); newTry = (Button) dialog.findViewById(R.id.bNewTry); tv_time = (TextView) dialog.findViewById(R.id.tv_time); tv_day = (TextView) dialog.findViewById(R.id.tv_day); tv_date = (TextView) dialog.findViewById(R.id.tv_date); resume.setOnClickListener(this); menu.setOnClickListener(this); newTry.setOnClickListener(this); } @Override protected void onResume() { //if its running the first time it goes in the brackets if(firstStart) { ourV.onResume(); firstStart=false; } } Now what onResume in ourV does is , its responsible for starting the thread //this is ourV.onResume public void onResume() { t=new Thread(this); isRunning=true; t.start(); } Now what I want is to initialise all bitmaps sounds etc in the async background method public class initVariables extends AsyncTask<Void, Integer, Void> { ProgressDialog pd; @Override protected void onPreExecute() { pd = new ProgressDialog(GameActivity.this); pd.setProgressStyle(ProgressDialog.STYLE_HORIZONTAL); pd.setMax(100); pd.show(); } @Override protected Void doInBackground(Void... arg0) { synchronized (this) { for(int i=0;i<20;i++) { publishProgress(5); try { Thread.sleep(89); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } } } return null; } @Override protected void onProgressUpdate(Integer... values) { pd.incrementProgressBy(values[0]); } @Override protected void onPostExecute(Void result) { pd.dismiss(); setContentView(ourV); } } Now since I am new to this. You could tellme maybe if async is not required for such stuff and there is another way of doing it normally.

    Read the article

  • Faster Memory Allocation Using vmtasks

    - by Steve Sistare
    You may have noticed a new system process called "vmtasks" on Solaris 11 systems: % pgrep vmtasks 8 % prstat -p 8 PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP 8 root 0K 0K sleep 99 -20 9:10:59 0.0% vmtasks/32 What is vmtasks, and why should you care? In a nutshell, vmtasks accelerates creation, locking, and destruction of pages in shared memory segments. This is particularly helpful for locked memory, as creating a page of physical memory is much more expensive than creating a page of virtual memory. For example, an ISM segment (shmflag & SHM_SHARE_MMU) is locked in memory on the first shmat() call, and a DISM segment (shmflg & SHM_PAGEABLE) is locked using mlock() or memcntl(). Segment operations such as creation and locking are typically single threaded, performed by the thread making the system call. In many applications, the size of a shared memory segment is a large fraction of total physical memory, and the single-threaded initialization is a scalability bottleneck which increases application startup time. To break the bottleneck, we apply parallel processing, harnessing the power of the additional CPUs that are always present on modern platforms. For sufficiently large segments, as many of 16 threads of vmtasks are employed to assist an application thread during creation, locking, and destruction operations. The segment is implicitly divided at page boundaries, and each thread is given a chunk of pages to process. The per-page processing time can vary, so for dynamic load balancing, the number of chunks is greater than the number of threads, and threads grab chunks dynamically as they finish their work. Because the threads modify a single application address space in compressed time interval, contention on locks protecting VM data structures locks was a problem, and we had to re-scale a number of VM locks to get good parallel efficiency. The vmtasks process has 1 thread per CPU and may accelerate multiple segment operations simultaneously, but each operation gets at most 16 helper threads to avoid monopolizing CPU resources. We may reconsider this limit in the future. Acceleration using vmtasks is enabled out of the box, with no tuning required, and works for all Solaris platform architectures (SPARC sun4u, SPARC sun4v, x86). The following tables show the time to create + lock + destroy a large segment, normalized as milliseconds per gigabyte, before and after the introduction of vmtasks: ISM system ncpu before after speedup ------ ---- ------ ----- ------- x4600 32 1386 245 6X X7560 64 1016 153 7X M9000 512 1196 206 6X T5240 128 2506 234 11X T4-2 128 1197 107 11x DISM system ncpu before after speedup ------ ---- ------ ----- ------- x4600 32 1582 265 6X X7560 64 1116 158 7X M9000 512 1165 152 8X T5240 128 2796 198 14X (I am missing the data for T4 DISM, for no good reason; it works fine). The following table separates the creation and destruction times: ISM, T4-2 before after ------ ----- create 702 64 destroy 495 43 To put this in perspective, consider creating a 512 GB ISM segment on T4-2. Creating the segment would take 6 minutes with the old code, and only 33 seconds with the new. If this is your Oracle SGA, you save over 5 minutes when starting the database, and you also save when shutting it down prior to a restart. Those minutes go directly to your bottom line for service availability.

    Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >