Search Results

Search found 14236 results on 570 pages for 'times square'.

Page 70/570 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• How can I easily correct slight rotational misalignment in scanned images

  - by AndrewR

  I've got a whole lot of scanned images ( 500) the majority of which were scanned with the paper not completely square. They need to be rotated about 1-5 degrees to be aligned again. Is there any software that does this? I know some scanner drivers do but mine doesn't seem to.

  Read the article

• FTP Active vs passive mode

  - by Dan

  I have a FTP server and while doing testing I found an odd issue that I don't understand. I send a RETR command on file "/Folder1/file.txt" and it works fine. Then I send a RETR command on file "/Folder1/SubFolder1/file.txt" and it times out on transfering the data to the client. This was in active mode. When I switch to passive mode it works fine. I understand the difference between the two modes, but what I don't understand is why it worked for one file in active mode, but not the other. I tried it a dozen times and still got the same results. Any ideas? Thanks!

  Read the article

• Print same text several time to one page

  - by RiaD

  I have a odt(or pdf, or ps) file. [Really I have odt, but I can easily convert it], it consist of 1 page. No I want to print it to another pdf 4 times to 1 page. There is an option pages per side, so If I copy-paste 4 times my document and set this option to 4 I'll have my expected result. But I want to do it without copy-paste because it's quite annoying to copy-and-paste before each printing. Is it simpler way?

  Read the article

• Intermittent HTTP 401 errors

  - by forthrin

  I am using an Intranet solution which requires basic HTTP login. However, there is an intermittent error which requires me to log in again, and then the server says "Forbidden" whether I give the correct login information or not. To add insult to injury, Safari (and Chrome) seems to show the login dialog for every included resource in the HTML, and it's impossible to cancel this modal dialog sequence, so the whole browser is blocked until I've pressed Esc some 30 odd times. After an hour, I may gain access again, without having really done anything. My questions: What could cause temporal 401 errors? Why do the browsers show the login dialog 30 times per page load (assumedly for every included resource in the HTML from the same domain)?

  Read the article

• Split or individually edit repeating Google Calendar events

  - by Steve Crane

  Our company just moved from Microsoft Exchange with Outlook to Google Mail, Calendar, etc. and I am trying to modify a calendar event where it repeats, but the times across the days are not the same. I created an event from 10h00 to 16h30 and made it repeat for two days. Now the times need to be adjusted independently for the two days. I could just cancel the repeat and book a new appointment for the second day but the event has a confirmed room booking and with rooms at a premium I worry that someone else may grab the room before I can create the new second day event. Outlook had a way to modify repeating events individually but I'm not seeing anything like that in the Google Calendar web client. So my question is whether there is a way to individually edit repeating events, or failing that, to split the repeating event into individual ones?

  Read the article

• Ubuntu karmic 9.10 Live image on USB - not working.

  - by Vivek Sharma

  This is my configuration 4GB pendrive, HP ubuntu-9.10-desktop-i386 image file for live USB install pendrivelinux (u910p) and ubetbootin (unetbootin.sourceforge.net) machine T61 Earlier I have installed ubuntu live image using above two mentioned utilities, numerous times. But, on a 2gb kingston flash-drive. Today, i am trying to install the live-image on 4gb HP flash-drive. Both the utilities install, i can see the files in the drive, even the wubi-installer is working, it say press "reboot" to boot in live-ubuntu. But, when i press "reboot" it does not reboot my win7. Now, when i reboot, select boot-usb in bios, it say "no boot record". I am making my usb bootable, using the utility, even then nothing is working out. Did this a few times. Is 4GB usb a prob, does anyone knows how to partition my usb in 2-2gb and install it on one partition, and then use the live image. Is it possible.

  Read the article

• Good speedtest results, but web pages don't load

  - by dmt0

  I have strange connection problems. Ping and download times are good - speedtest.net showed ping 65ms and download 2.17Mbps. Torrent is working well, giving me up to 300MBps. Webpages are loading very poorly though. They are timing out each time - I'd have to refresh 4-5 times to get any simple page to load. It has been happening consistently for the last few days. Same with different browsers on different machines (same network), Windows and Linux. There is no proxy in the browser. Is there any setting in Windows or in a browser that I can change to help this? Some background: I live on this island in Thailand, where internet connection is through radio to another island and than to mainland - it's very weather dependent, but generally OK. As I mentioned, ping is good. Any input is very appreciated.

  Read the article

• How to configure Notepad++ (Scintilla) to write below EOF after EOL [on hold]

  - by Piotr Piaseczny

  Is it possible to configure scintilla to "brake" EOL/EOF while writing ? Now, if I want to begin writing in a column after EOL, I use ALT+left mouse button and start typing after click. No idea how to begin writing below EOF. Pressing Enter key many times is the only method now. Other explanation: If You open a new document, doesnt matter what kind of (php/txt etc) all You have is just one line. If You want to write in line 5 - must press Enter 5 times. Every other editor I know (IDE in Builder C++/MultiEdit) "ignore" eof and you can write anywhere in document. Because of php/html I've found notepad++ as a best editor but I'd like to "brake" limitations of (probably) scintilla

  Read the article

• Windows 2008 R2 on ESXi 4.1 cpu utilization kernel high

  - by MK.

  I have a Win2k8 guest running on ESXi 4.1. The host has 12 cores and the problem happens even if the guest is the only VM on the host. We have 4 cores dedicated to the guest. We noticed that network starts chocking when the CPU load goes up. After some testing we noticed that when running a simple CPU hogging tool set up to run 3 threads at 100% the regular CPU load goes to 75% like it should and the "kernel times" graph in task manager goes up to 25%. My intuition tells me that the network problem and kernel times problem are the same. This is confirmed by another similar VM we created on the same host which doesn't have either of the problems. VMWare tools are obviously installed. The nic is e1000. What else can we do to troubleshoot this?

  Read the article

• Network speeds being report as 4x higher than actual in Windows 7 SP1

  - by Synetech

  Ever since installing Windows 7 SP1, I have noticed that all programs that display my network transfer rate have been exactly 4x higher than they actually are. For example, when I download something from a high-bandwidth web site or through torrents with lots of sources, the download rate indicated is is ~5MBps (~40Mbps) even though my Internet connection has a maximum of only 1.5MBps (12Mbps). It is the same situation with the upstream bandwidth: the connection maximum is 64KBps, but I’m seeing up to 256KBps. I have tried several different programs for monitoring bandwidth throughput and they all give the same results. I also tried different times and different days, and they always show the rate as being four times too high. My initial thought was that my ISP had increased the speeds (without my noticing), which they have done before. However, I checked my ISP’s site and they have not increased the speeds. Moreover, when I look at the speeds in the program actually doing the transfer (eg Chrome, µTorrent, etc.), the numbers are in line with the expected values at the same time that bandwidth monitoring programs are showing the high numbers. The only significant change (and pretty much the only change at all) that has occurred to my system since the change was the installation of SP1 for Windows 7. As such, it is my belief that some sort of change exists in SP1 whereby software that accesses the bandwidth via a specific API receives (erroneously?) high numbers while others that have access to the raw data continue to receive the correct values. I booted into Windows XP and downloaded some things via HTTP and torrent and in both cases, the numbers were as expected (like they were in Windows 7 before installing SP1). I then booted back into 7SP1 and once again, the numbers were four times higher than possible. Therefore it is definitely something in SP1 that has changed how local bandwidth is calculated/returned. There is definitely something wonky with Windows 7 SP1’s network speed calculation. I tried Googling this, but (for multiple reasons), have had a difficult time finding anything relevant. Has anybody else noticed this behavior? Does anybody know of any bugs or changes in SP1 that could account for it?

  Read the article

• How can I change the default keyboard layout in Ubuntu 10.10?

  - by startoftext

  Ubuntu keeps detecting my keyboard layout as Romanian. It almost always does this on a reboot and some times on waking from sleep. Some times it just randomly changes back to Romanian while the computer is on. I always set it back to "USA" in the keyboard preferences and delete the Romanian layout. What files configure this in Ubuntu? I looked in xorg.conf and did not find any keyboard settings. How can I set this to USA permanently? I have a laptop with a typical US layout built in keyboard and I also have an apple keyboard that is also US layout connected via USB. I have run other distributions on this same setup before and never had this happen.

  Read the article

• I have problem with pc. Random reboots with post hyper transport sync flood error

  - by user29867

  I have problem with my pc. Random reboots with post "hyper transport sync flood" error. It happens completely random. Most times i watch movie, some times when i play a game, even when i browse internet. My spec are as follow: MB ASUS M4A78-E CPU Phenom II 940 Sapphire Radeon hd4850 Vapor-X RAM OCZ DDR2 PC2-8500 kit 2x2GB PSU CM Real Power M520W CASE CM Centurion 590 Temps of MB, CPU and 4850 are in normal range. MB is hooter, around 60-70°C under load, Radeon 60-65°C under load (playing game for couple hours). CPU dos not past 50-55°C. So i think its not a cooling problem, CM case is pretty good, and have a lots of fans. I try with this memmory: TWIN2X4096-6400C5DHX same problem.

  Read the article

• Log highlighted lines to window in irssi

  - by Sebastian P.

  I usually keep an irssi session running on my server at all times. Often times it also takes me quite a while between remembering that I in fact have it running. Therefore I'd like to know if there's an easy way to log all lines that are highlighted to a custom window, such that I later, when I return, can see what people have said that was directed at me. Most useful would of course be if it logged both nickname, time and place (channel, network) of the message. I've been looking around, and haven't managed to get anything working which accomplishes this, so it would be splendid if such a thing existed.

  Read the article

• Grub hangs intermittently on "Starting Up..."

  - by Griffo

  Hi all, I've had this problem for a while now. My linux server is set to wake-on-lan but occasionally it halts at Grubs "Starting Up..." and goes no further. This is not due to additional hardware being attached such as a flash drive or anything as I never plug anything into it. It may boot perfectly 40 times in a row and then hit this issue. Sometimes it gets the issue a couple of times in quick succession and doesn't happen for ages again. I'm not sure how to diagnose it since it doesn't seem to be reproducible. Any help much appreciated. Thanks

  Read the article

• Is there a way to change the permissions of a series of directories on Windows 7 without getting a dialog box when it can't change the rights?

  - by leeand00

  Is there some way to change the permissions recursively on a series of directories without getting a dialog box that pops up and tells me it can't change the permissions on a particular file? I keep getting this dialogs multiple times duing the process of changing permissions: An error occurred while applying security information to: C:\pagefile.sys The process cannot access the file because it is being used another process. Eventually I get so many of them that I start clicking the mouse or pressing the space bar so many times that I accidentally click the cancel button. Also it would be great if I could keep a log of which files it can't change permissions on. Is this possible in Windows 7? Does it have to be done from the command prompt or from powershell?

  Read the article

• writting becomes slow after few writes

  - by user1566277

  I am running an embedded Linux on arm with a SD-Card. While writing huge amounts of data I see bizarre effects. E.g, when I dd a 15 MB file few times, it writes the file (normally) in less than 2 Secs. But After lets say 3-4 times it takes sometimes 15 to 30 Seconds to write the same file. If I sync after writing the file, then this does not happen but sync takes long time too. If there is enough gap between writing two files than presumably kernel syncs itself. How can I optimize the whole performance so that write should always finish inside 2 Seconds. The File system I am using is ext3. Any pointers?

  Read the article

• BIND unstable with DLZ+MySQL on Ubuntu 9.10, any ideas?

  - by Chris

  My BIND server keeps dropping out and I can't work out why. Here is some info from the syslog that I think pertains to the failure(s): Apr 22 21:12:17 dnsdebug named[6613]: mysql driver unable to return result set for lookup query Apr 22 21:12:17 dnsdebug kernel: [285552.573949] type=1503 audit(1271963537.759:53): operation="open" pid=6618 parent=1 profile="/usr/sbin/named" requested_mask="::rw" denied_mask="::rw" fsuid=107 ouid=0 name="/dev/tty" Apr 22 21:12:17 dnsdebug named[6613]: mysql driver unable to return result set for lookup query Apr 22 21:13:17 dnsdebug named[6613]: last message repeated 7 times Any ideas? Mysql had a segfault sometimes, but that seems to be no longer an issue. It's the 64bit version of ubuntu too. Sometimes it will return records just fine, other times it appears to just randomly go down.

  Read the article

• Real RAM latency

  - by user32569

  Hi, very quick question. When I look for RAM timing, I got 2 different explanations on what is CAS latency. First states, its the time after command to read has been issued from CPU and data are send to data bus. Second says its time betwen column in memory layout has been activated. So, where is the truth? I mean, when I want to know total RAM latenci, in case 1, ot would be just CAS times one clock time. In second case, it would be CAS+other things like RAstoCAS and so times one clock time. Thanks.

  Read the article

• How to get audio driver for compaq c700 ?

  - by Leena

  Hi, Initially i have audio driver and its works fine.But some times speaker was clear.So one of my friend installed some audio driver,after that totally disabled the volume. For that reason, i also tried to get audio driver and installed many times.Now i don't know many drivers .inf in my laptop.from device manager i have deleted the audio driver's,below i have attached the screen shot yours kind reference. Please help me to get audio drivers.First, i need to remove the unwanted drivers .inf files from laptop then i have to install the new audio driver. Experts,please suggest me to get audio driver without reinstall the OS. Details: Compaq c700 (i don't know model number) windows xp sp2 p/n : KT188PA#ACJ I appreciate your help.

  Read the article

• Problem communicating with one machine in my domain

  - by pmaroun

  Context: 3 HyperV guest images (DC, SQL, MOSS) 1 internal network 1 domain (PJM.COM) DC: 192.168.0.192 SQL: 192.168.0.153 MOSS:192.168.0.160 I am having communication problems from/to the MOSS machine from the other two. I removed the MOSS machine from the domain and cannot rejoin. When I ping the MOSS machine from DC, I get the following response: Pinging MOSS [192.168.0.152] Reply from 192.168.0.192 Destination host unreachable (4 times) When I ping the MOSS machine from SQL, I get the following response: Pinging MOSS [192.168.0.152] Reply from 192.168.0.153 Destination host unreachable (4 times) From the MOSS machine, I can ping the server names, however I cannot ping the FQDN. When I ping from the DC and SQL machines, I get IPv4 addresses. When I ping from the MOSS machine, I get IPv6 addresses. I'm a developer and don't know what steps to take to resolve this issue. Please help!?

  Read the article

• When does a cached website refresh?

  - by user142485

  If i go to example.com [placeholder for different website] it creates the numerous cache entries in the browser for different items on the page and two entries for example.com. One of which expires in 1.5hrs and the other has 'No expiration time.' What I am wondering is: when does the browser display the cached page and when does it get the newest version from the server (when re-visiting the site)? What do the two different expiration times for the top level domain mean? A web page I went to was temporarily redirecting to a different page. After it was back up, I was still getting redirected to the temp page even though the correct page was up. Would this have eventually resolved itself based on expiration times or does the cache need to be cleared?

  Read the article

• wireless printer - entering WPA - is there a quicker way?

  - by camcam

  I have a wireless printer (Brother DCP-585CW). The wireless setup instruction says I should enter the WPA key to the printer. The key is entered using up and down buttons on the printer. So, I am supposed to enter 64 characters using up and down buttons. To enter 1 character, it takes on average (24+10)/2 = 17 times pressing the button (digits start after 24 letters). So 17*64 = 1088 times. Is there a quicker way to setup a wireless printer? Maybe there is a Windows program that discovers printers connected to computer through USB or Ethernet (my printer has both sockets) and allows to pre-configure it for wireless usage (enter the long WPA key)? Update There is BRAdmin program and it allows to set up almost all wireless settings... almost - all except WPA :(

  Read the article

• Is it possible to run my other partition inside of a VM?

  - by Parris

  So I have dual boot machine with windows 7 and ubuntu 11. I would like to, at times, run a vm from one partition to another. For example sometimes I would like to do certain things in windows while still using ubuntu. At other times, perhaps the opposite would be more effective. Why? Well running a vm is fairly resource intensive, and depending on what I am doing primarily I would rather be in one operating system vs the other, or perhaps it is just convenient. An important consideration is that you should NOT need to "copy" or "duplicate" the partition in any way. The VM should just read the partition as if it were a standard image. Any ideas? I am using virtual box currently. I have also used virtual pc. I could probably get a copy of vmware workstation if needed.

  Read the article

• How to schedule download of windows 7 updates?

  - by atoMerz

  To put it short: I'd like to schedule my windows updates to start/stop at certain times of day. How can I do this? More explanation: This is because my internet traffic is limited by ISP and it's free only during a specific period throughout the day (2:00am-7:00am). I've set windows update setting to check for updates but notify me before downloading in order to prevent it from automatically using up my traffic. But then I have to manually tell it when to start downloading. I obviously don't want to stay up that late just to push a button. So again, how can I schedule windows updates to start/stop at specified times?

  Read the article

• Third monitor randomly defaults to 640 x 480 on startup

  - by ajbdev

  I purchased a PowerColor HD 5770 video card so I could get a third monitor working. I have two widescreen monitors, one attached via HDMI and the other attached via DVI. My third monitor is attached from DisplayPort to VGA (using a passive connector like this one) The third monitor is a 19" Hyundai L90D. I was unable to find any Windows 7 (or Vista for that matter) drivers for the monitor, so it's stuck with "Generic Non-PNP Monitor". It's native resolution is 1280 x 1024. Randomly Windows will boot up in the correct native res, but sometimes it boots up in 640 x 480 res. When it does boot up into 640 x 480 res, the screen resolution slider is stuck and I cannot slide it back to 1280 x 1024. I cannot find a pattern for when or why it will do this, I've tried rebooting five or six times in a row at times to get it to boot into native res, but this doesn't always work.

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >