new technology - Page 701

How do create an encrypted system with multiple Linux distributions?

- by niels

A few weeks ago I created a completely encrypted system on a notebook and must say I like the idea. It's a little bit annoying to enter the password on every boot, but it's nice to know even if I loose the computer I don't give my data to other people. With the alternate-cd it's easy to do. Now I have to setup a new system where I want to combine the new idea with my usual usage strategy. There I have more partitions: 3 system, Home, Different Data-Partitions for vm-data, photo-data and mp3-data. The background is that I prefer not to update a system. I prefer to install the new version parallel to the old system. So I can easily test it. Obviously the Data-Partitions are used for both systems. My questions is, how can I easily combine both my strategy and the crypto-approach? Or is it impossible. The way to do the crypted stuff by hand is in my eyes to complicated.

Read the article

XNA 4: GetData from Texture2D and Set it into Texture3D with specific order

- by cubrman

I am trying to convert my color grading 2d lookup texture into 3d LUT. When I simply use: ColorAtlas.GetData(data); ColorAtlas3D.SetData(data); I get this: I tried building my 2d atlass horizontally but it did not helped - the data was messed up in a different way. So my question is how can I influence the order of the data I get from the 2d atlas and how can I properly pass it into my 3d atlas? Update: I know that I can GetData from a specific Rectangular area and put it into several arrays, but the result is still the same. This is what I tried: Color[] data2D = new Color[0]; for (int i = 0; i < 32; i++) { Color[] data = new Color[32 * 32]; GraphicsDevice.SetRenderTarget(null); ColorAtlas.GetData(0, new Rectangle(0, i*32, 32, 32), data, 0, data.Length); int oldLength = data2D.Length; Array.Resize<Color>(ref data2D, oldLength + data.Length); Array.Copy(data, 0, data2D, oldLength, data.Length); } ColorAtlas3D.SetData(data2D);

Read the article

Cannot set monitor to native resolution

- by S B

problem is similar to so many other users, but solutions found do not work. Background: Fresh install of 12.04 (completely updated) on a Fit-PC2 (specs). Read in several places that the new 3.X kernel that 12.04 runs on has a new psb_gfx driver which supports the gma500 graphics card (poulsbo chipset). All's pretty much working (there are some glitches which are documented, so I won't raise them here), except for the screen resolution. My native monitor resolution is 1920X1080, but all I get is 1024x768. Output running xrandr: xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0* Although I read that Ubuntu does not come with an xorg.conf file anymore, I also tried running sudo X :1 -configure, and here's the end of the output: Number of created screens does not match number of detected devices. Configuration failed. When I look in the xorg.conf.new file created in my home directory, it seems that for some reason X thinks I have two screens. Don't know what to do with that. Ideas anyone? Thanks for your time.

Read the article

The Return Of FILE And LINE In .NET 4.5

- by Alois Kraus

Good things are hard to kill. One of the most useful predefined compiler macros in C/C++ were __FILE__ and __LINE__ which do expand to the compilation units file name and line number where this value is encountered by the compiler. After 4.5 versions of .NET we are on par with C/C++ again. It is of course not a simple compiler expandable macro it is an attribute but it does serve exactly the same purpose. Now we do get CallerLineNumberAttribute == __LINE__ CallerFilePathAttribute == __FILE__ CallerMemberNameAttribute == __FUNCTION__ (MSVC Extension) The most important one is CallerMemberNameAttribute which is very useful to implement the INotifyPropertyChanged interface without the need to hard code the name of the property anymore. Now you can simply decorate your change method with the new CallerMemberName attribute and you get the property name as string directly inserted by the C# compiler at compile time. public string UserName { get { return _userName; } set { _userName=value; RaisePropertyChanged(); // no more RaisePropertyChanged(“UserName”)! } } protected void RaisePropertyChanged([CallerMemberName] string member = "") { var copy = PropertyChanged; if(copy != null) { copy(new PropertyChangedEventArgs(this, member)); } } Nice and handy. This was obviously the prime reason to implement this feature in the C# 5.0 compiler. You can repurpose this feature for tracing to get your hands on the method name of your caller along other stuff very fast now. All infos are added during compile time which is much faster than other approaches like walking the stack. The example on MSDN shows the usage of this attribute with an example public static void TraceMessage(string message, [CallerMemberName] string memberName = "", [CallerFilePath] string sourceFilePath = "", [CallerLineNumber] int sourceLineNumber = 0) { Console.WriteLine("Hi {0} {1} {2}({3})", message, memberName, sourceFilePath, sourceLineNumber); } When I do think of tracing I do usually want to have a API which allows me to Trace method enter and leave Trace messages with a severity like Info, Warning, Error When I do print a trace message it is very useful to print out method and type name as well. So your API must either be able to pass the method and type name as strings or extract it automatically via walking back one Stackframe and fetch the infos from there. The first glaring deficiency is that there is no CallerTypeAttribute yet because the C# compiler team was not satisfied with its performance. A usable Trace Api might therefore look like enum TraceTypes { None = 0, EnterLeave = 1 << 0, Info = 1 << 1, Warn = 1 << 2, Error = 1 << 3 } class Tracer : IDisposable { string Type; string Method; public Tracer(string type, string method) { Type = type; Method = method; if (IsEnabled(TraceTypes.EnterLeave,Type, Method)) { } } private bool IsEnabled(TraceTypes traceTypes, string Type, string Method) { // Do checking here if tracing is enabled return false; } public void Info(string fmt, params object[] args) { } public void Warn(string fmt, params object[] args) { } public void Error(string fmt, params object[] args) { } public static void Info(string type, string method, string fmt, params object[] args) { } public static void Warn(string type, string method, string fmt, params object[] args) { } public static void Error(string type, string method, string fmt, params object[] args) { } public void Dispose() { // trace method leave } } This minimal trace API is very fast but hard to maintain since you need to pass in the type and method name as hard coded strings which can change from time to time. But now we have at least CallerMemberName to rid of the explicit method parameter right? Not really. Since any acceptable usable trace Api should have a method signature like Tracexxx(… string fmt, params [] object args) we not able to add additional optional parameters after the args array. If we would put it before the format string we would need to make it optional as well which would mean the compiler would need to figure out what our trace message and arguments are (not likely) or we would need to specify everything explicitly just like before . There are ways around this by providing a myriad of overloads which in the end are routed to the very same method but that is ugly. I am not sure if nobody inside MS agrees that the above API is reasonable to have or (more likely) that the whole talk about you can use this feature for diagnostic purposes was not a core feature at all but a simple byproduct of making the life of INotifyPropertyChanged implementers easier. A way around this would be to allow for variable argument arrays after the params keyword another set of optional arguments which are always filled by the compiler but I do not know if this is an easy one. The thing I am missing much more is the not provided CallerType attribute. But not in the way you would think of. In the API above I did add some filtering based on method and type to stay as fast as possible for types where tracing is not enabled at all. It should be no more expensive than an additional method call and a bool variable check if tracing for this type is enabled at all. The data is tightly bound to the calling type and method and should therefore become part of the static type instance. Since extending the CLR type system for tracing is not something I do expect to happen I have come up with an alternative approach which allows me basically to attach run time data to any existing type object in super fast way. The key to success is the usage of generics. class Tracer<T> : IDisposable { string Method; public Tracer(string method) { if (TraceData<T>.Instance.Enabled.HasFlag(TraceTypes.EnterLeave)) { } } public void Dispose() { if (TraceData<T>.Instance.Enabled.HasFlag(TraceTypes.EnterLeave)) { } } public static void Info(string fmt, params object[] args) { } /// <summary> /// Every type gets its own instance with a fresh set of variables to describe the /// current filter status. /// </summary> /// <typeparam name="T"></typeparam> internal class TraceData<UsingType> { internal static TraceData<UsingType> Instance = new TraceData<UsingType>(); public bool IsInitialized = false; // flag if we need to reinit the trace data in case of reconfigured trace settings at runtime public TraceTypes Enabled = TraceTypes.None; // Enabled trace levels for this type } } We do not need to pass the type as string or Type object to the trace Api. Instead we define a generic Api that accepts the using type as generic parameter. Then we can create a TraceData static instance which is due to the nature of generics a fresh instance for every new type parameter. My tests on my home machine have shown that this approach is as fast as a simple bool flag check. If you have an application with many types using tracing you do not want to bring the app down by simply enabling tracing for one special rarely used type. The trace filter performance for the types which are not enabled must be therefore the fasted code path. This approach has the nice side effect that if you store the TraceData instances in one global list you can reconfigure tracing at runtime safely by simply setting the IsInitialized flag to false. A similar effect can be achieved with a global static Dictionary<Type,TraceData> object but big hash tables have random memory access semantics which is bad for cache locality and you always need to pay for the lookup which involves hash code generation, equality check and an indexed array access. The generic version is wicked fast and allows you to add more features to your tracing Api with minimal perf overhead. But it is cumbersome to write the generic type argument always explicitly and worse if you do refactor code and move parts of it to other classes it might be that you cannot configure tracing correctly. I would like therefore to decorate my type with an attribute [CallerType] class Tracer<T> : IDisposable to tell the compiler to fill in the generic type argument automatically. class Program { static void Main(string[] args) { using (var t = new Tracer()) // equivalent to new Tracer<Program>() { That would be really useful and super fast since you do not need to pass any type object around but you do have full type infos at hand. This change would be breaking if another non generic type exists in the same namespace where now the generic counterpart would be preferred. But this is an acceptable risk in my opinion since you can today already get conflicts if two generic types of the same name are defined in different namespaces. This would be only a variation of this issue. When you do think about this further you can add more features like to trace the exception in your Dispose method if the method is left with an exception with that little trick I did write some time ago. You can think of tracing as a super fast and configurable switch to write data to an output destination or to execute alternative actions. With such an infrastructure you can e.g. Reconfigure tracing at run time. Take a memory dump when a specific method is left with a specific exception. Throw an exception when a specific trace statement is hit (useful for testing error conditions). Execute a passed delegate which e.g. dumps additional state when enabled. Write data to an in memory ring buffer and dump it when specific events do occur (e.g. method is left with an exception, triggered from outside). Write data to an output device. …. This stuff is really useful to have when your code is in production on a mission critical server and you need to find the root cause of sporadic crashes of your application. It could be a buggy graphics card driver which throws access violations into your application (ok with .NET 4 not anymore except if you enable a compatibility flag) where you would like to have a minidump or you have reached after two weeks of operation a state where you need a full memory dump at a specific point in time in the middle of an transaction. At my older machine I do get with this super fast approach 50 million traces/s when tracing is disabled. When I do know that tracing is enabled for this type I can walk the stack by using StackFrameHelper.GetStackFramesInternal to check further if a specific action or output device is configured for this method which is about 2-3 times faster than the regular StackTrace class. Even with one String.Format I am down to 3 million traces/s so performance is not so important anymore since I do want to do something now. The CallerMemberName feature of the C# 5 compiler is nice but I would have preferred to get direct access to the MethodHandle and not to the stringified version of it. But I really would like to see a CallerType attribute implemented to fill in the generic type argument of the call site to augment the static CLR type data with run time data.

Read the article

Creating Custom validation rule and register it

- by FormsEleven

What is Validation Rule? A validation rule is a piece of code that performs some check ensuring that data meets given constraints.In an enterprise application development environment, often it might require developers to have validation be performed based on some logic at several places across projects. Instead of redundant validation creation, a custom validation rule provides a library with a validation rules that can be registered and used across applications.A custom Validation is encapsulated in a reusable component so that you do not have to write it every time when you need to do input validation. Here is how we can easily implement a custom validation that checks for name of an employee to be "KING" For creating a custom Validation , 1. Create Generic Application Workspace "CustomValidator" with the project "Model" 2. Create an BC4J based on emp table. 3. Create a custom validation rule.In EmpNamerule class, update the validateValue(..) method as follows: public boolean validateValue(Object value) { EntityImpl emp = (EntityImpl)value; if(emp.getAttribute("Ename").toString().equals("KING")){ return false; } return true; } Create ADF Library: Next step would be to create ADF library. Create ADF library with name lets say testADFLibrary1.jarRegister ADF Library Next step is to register the ADF library , so that its available across the applications. Invoke the menu "Tools -> Preferences"Select the option "Business Components -> Registered Rules" from left paneClick on button "Pick Library". The dialog "Select Library" comes up with the user library addedAdd new library' that points to the above jarCheck the checkbox "Register" and set the name for the rule Sample UsageHere is how we can easily implement a validation rule that restrict the name of the employee not to be "KING".Create new Application with BC4J based on EMP table.Create new validation under Business rule tab for Ename & select the above custom validation rule.Run the AppModule tester.

Read the article

10 Innovations in PeopleSoft 9.2 - #2 Lower TCO With The Peoplesoft Update Manager

- by John Webb

With the new PeopleSoft Update Manager in PeopleSoft 9.2 the way you manage updates to your PeopleSoft systems puts you in control of all changes on your schedule. You can selectively apply patches with reduced time, effort, and cost. Bundles and Maintenance Packs are no longer used. Instead, a tailored custom package is automatically generated based on the parameters you select from the latest PeopleSoft source image. You have access to all updates from Oracle on a cumulative basis and can select and search for specific updates such as new features, legal and regulatory changes, or a patch related to a specific issue, process or object. Any prerequisites are automatically identified. The process of generating a change package is enabled through a new wizard with easy to follow steps and options. As changes are introduced to your test environment the PeopleSoft Test Framework provides a closed loop process to run regression tests scripts against your changes. For a quick overview of the PeopleSoft Update Manager check out the Video Feature Overview here: PeopleSoft Update Manager Video Feature Overview

Read the article

Updating physics for animated models

- by Mathias Hölzl

For a new game we have do set up a scene with a minimum of 30 bone animated models.(shooter) The problem is that the update process for the animated models takes too long. Thats what I do: Each character has ~30 bones and for every update tick the animation gets calculated and every bone fires a event with the new matrix. The physics receives the event with the new matrix and updates the collision shape for that bone. The time that it takes to build the animation isn't that bad (0.2ms for 30 Bones - 6ms for 30 models). But the main problem is that the physic engine (Bullet) uses a diffrent matrix for transformation and so its necessary to convert it. Code for matrix conversion: (~0.005ms) btTransform CLEAR_PHYSICS_API Mat_to_btTransform( Mat mat ) { btMatrix3x3 bulletRotation; btVector3 bulletPosition; XMFLOAT4X4 matData = mat.GetStorage(); // copy rotation matrix for ( int row=0; row<3; ++row ) for ( int column=0; column<3; ++column ) bulletRotation[row][column] = matData.m[column][row]; for ( int column=0; column<3; ++column ) bulletPosition[column] = matData.m[3][column]; return btTransform( bulletRotation, bulletPosition ); } The function for updating the transform(Physic): void CLEAR_PHYSICS_API BulletPhysics::VKinematicMove(Mat mat, ActorId aid) { if ( btRigidBody * const body = FindActorBody( aid ) ) { btTransform tmp = Mat_to_btTransform( mat ); body->setWorldTransform( tmp ); } } The real problem is the function FindActorBody(id): ActorIDToBulletActorMap::const_iterator found = m_actorBodies.find( id ); if ( found != m_actorBodies.end() ) return found->second; All physic actors are stored in m_actorBodies and thats why the updating process takes to long. But I have no idea how I could avoid this. Friendly greedings, Mathias

Read the article

plot markers on google maps with json and jquery

- by mark

I am trying to plot the markers as defined in a json file om Google Maps but they don't show on the map. Can somebody help me with this problem? This is the Json file: http://sionvalais.com/gmap/markers/ This is the Javascritp function: function loadMarkers() { var bounds = map.getBounds(); var zoomLevel = map.getZoom(); $.post("/gmaps/markers/index.php", {zoom: zoomLevel, swLat: bounds.getSouthWest().lat(), swLon: bounds.getSouthWest().lng(), neLat: bounds.getNorthEast().lat(), neLon: bounds.getNorthEast().lng()}, function(data) { processMarkers(data, _smallMarkerSize); }, "json" ); } function processMarkers(webcams, markerSize) { var marker = null; var markersInView = new Array(); var idsInView = new Array(); // Loop through the new webcams for (var i = 0; i < webcams.length; i++) { var idx = markers.indexOf(webcams[i].id); if (idx == -1) { var info_html = "<table class='infowindow'>"; info_html += "<tr><td class='img'>"; info_html += "<img src='" + webcams[i].smallimg + "' /><td>"; info_html += "<td><p><b>" + webcams[i].loc + "</b>"; info_html += "<br /><a href='/webcam/" + webcams[i].url + "' target='_blank'>Show webcam</a></p></td></tr>"; info_html += "</table>"; marker = new WebcamMarker(new GLatLng(webcams[i].latitude, webcams[i].longitude), {image: "" + webcams[i].smallimg + "", height: markerSize, width: markerSize}); marker.myhtml = info_html; map.addOverlay(marker); markersInView[webcams[i].id] = marker; } else { markersInView[webcams[i].id] = markers[webcams[i].id]; } idsInView.push(webcams[i].id); } // Now remove the markers outside of the viewport for (var i = 0; i < webcamids.length; i++) { var idx = markersInView.indexOf(webcamids[i]); if (idx == -1) { marker = markers[webcamids[i]]; map.removeOverlay(marker); } } markers = markersInView; webcamids = idsInView; }

Read the article

WP7 silverlight custom control using popup

- by Miloud B.

Hi guys, I'm creating a custom datepicker, I have a textbox, once clicked it opens a calendar within a popup. What I want to do is change the size of the popup so it shows my whole calendar, but I can't manage to change it..., I've tried using Height, Width, MinHeight, MinWidth... but it doesn't work, the popup keep showing with a fixed size. The thing is that my popup's parent property isn't evaluated since it has expression issues (according to debugger), so I'm sure my popup's parent isn't the main screen( say layout grid). How can I for example make my popup open within a specific context ? This part of my code isn't XAML, it's C# code only and it looks like: using System; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Ink; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Windows.Controls.Primitives; namespace CalendarBranch.components { public class wpDatePicker:TextBox { private CalendarPopup calendar; private Popup popup; public wpDatePicker() { this.calendar = new CalendarPopup(); this.popup = new Popup(); this.popup.Child = this.calendar; this.popup.Margin = new Thickness(0); this.MouseLeftButtonUp += new MouseButtonEventHandler(wpDatePicker_MouseLeftButtonUp); this.calendar.onDateSelect += new EventHandler(onDateSelected); this.IsReadOnly = true; } protected void wpDatePicker_MouseLeftButtonUp(object sender, MouseButtonEventArgs e) { this.popup.Height = this.calendar.Height; this.popup.Width = this.calendar.Width; this.popup.HorizontalAlignment = HorizontalAlignment.Center; this.popup.VerticalAlignment = VerticalAlignment.Center; this.popup.HorizontalOffset = 0; this.popup.VerticalOffset = 0; this.popup.MinHeight = this.calendar.Height; this.popup.MinWidth = this.calendar.Width; this.popup.IsOpen = true; } private void onDateSelected(Object sender, EventArgs ea) { this.Text = this.calendar.SelectedValue.ToShortDateString(); this.popup.IsOpen = false; } } } PS: the class Calendar is simply a UserControl that contains a grid with multiple columns, HyperLinkButtons and TextBlocks, so nothing special. Thank you in advance guys ;) Cheers Miloud B.

Read the article

Qt - Calling widget parent's slots

- by bullettime

I wrote a small program to test accessing a widget parent's slot. Basically, it has two classes: Widget: namespace Ui { class Widget; } class Widget : public QWidget { Q_OBJECT public: Widget(QWidget *parent = 0); ~Widget(); QLabel *newlabel; QString foo; public slots: void changeLabel(); private: Ui::Widget *ui; }; Widget::Widget(QWidget *parent) : QWidget(parent), ui(new Ui::Widget) { ui->setupUi(this); customWidget *cwidget = new customWidget(); newlabel = new QLabel("text"); foo = "hello world"; this->ui->formLayout->addWidget(newlabel); this->ui->formLayout->addWidget(cwidget); connect(this->ui->pushButton,SIGNAL(clicked()),cwidget,SLOT(callParentSlot())); connect(this->ui->pb,SIGNAL(clicked()),this,SLOT(changeLabel())); } void Widget::changeLabel(){ newlabel->setText(this->foo); } and customWidget: class customWidget : public QWidget { Q_OBJECT public: customWidget(); QPushButton *customPB; public slots: void callParentSlot(); }; customWidget::customWidget() { customPB = new QPushButton("customPB"); QHBoxLayout *hboxl = new QHBoxLayout(); hboxl->addWidget(customPB); this->setLayout(hboxl); connect(this->customPB,SIGNAL(clicked()),this,SLOT(callParentSlot())); } void customWidget::callParentSlot(){ ((Widget*)this->parentWidget())->changeLabel(); } in the main function, I simply created an instance of Widget, and called show() on it. This Widget instance has a label, a QString, an instance of customWidget class, and two buttons (inside the ui class, pushButton and pb). One of the buttons calls a slot in its own class called changeLabel(), that, as the name suggests, changes the label to whatever is set in the QString contained in it. I made that just to check that changeLabel() worked. This button is working fine. The other button calls a slot in the customWidget instance, named callParentSlot(), that in turn tries to call the changeLabel() slot in its parent. Since in this case I know that its parent is in fact an instance of Widget, I cast the return value of parentWidget() to Widget*. This button crashes the program. I made a button within customWidget to try to call customWidget's parent slot as well, but it also crashes the program. I followed what was on this question. What am I missing?

Read the article

Access Control and Accessibility in Oracle IRM 11g

- by martin.abrahams

A recurring theme you'll find throughout this blog is that IRM needs to balance security with usability and manageability. One of the innovations in Oracle IRM 11g typifies this, as we have introduced a new right that may be included in any role - Accessibility. When creating or modifying a role, you simply select Accessibility along with Open, Print, Edit or whatever rights you want to include in the role. You might, for example, have parallel roles of Reader and Reader with Accessibility and Contributor and Contributor with Accessibility. The effect of the Accessibility right is to relax some of the protection of content in use such that selected users can use accessibility tools. For example, a user with the Accessibility right would be able to use the screen magnification tool, which IRM would ordinarily prevent because it involves screen capture. This new right makes it easy for you to apply security to documents yet, subject to suitable approval processes, cater for the fact that a subset of users might be disproportionately inconvenienced by some of the normal usage constraints. Rather than make those users put up with the restrictions, or perhaps exempt them from using sealed documents altogether, this new right allows you to accommodate them in a controlled manner, and to balance security with corporate accessibility goals.

Read the article

CodePlex Daily Summary for Wednesday, May 21, 2014

CodePlex Daily Summary for Wednesday, May 21, 2014Popular ReleasesSpotify Plugin for Jamcast: Spotify Plugin for Jamcast v2.0: This release works with Jamcast 2.0 API. Implements search. Requires libspotifydotnet 4.0.0.0 and libspotify 12.1.51libspotify.NET - a managed interop library for libspotify: libspotify.NET v4.0 (x86): Bugfixes, API changes.SharpLightReporting: SharpLightReporting 1.0.2: Bug Fix: Picture tag is now able to get the data from the property. NullReferenceException is not being thrown now. Added: addtocolpos and addtorowpos attributes to chat tagWindows Embedded Board Support Package for BeagleBone: WEC7 BeagleBone Black 01.05.00: Demo image. Runs on BeagleBone White and Black. On BeagleBone Black works with uSD or eMMC based images SDK and demo tests included Now with Silverlight and OpenGL (PoweVR) support! Built and maintained in the U.S.A.!MISAO: Ver. 5.4: Fix bugs (Nicovideo viwer add-in) Add Masakari option (Nicovideo viwer add-in)SubVersionOne: SubVersionOne 1.3: Removed reference to old V1 SDK and changed all queries to use REST API. Added status and scopes to the workitem view.VisioAutomation: Visio PowerShell Module (VisioPS) 1.1.26: DocumentationDocumentation is here http://sdrv.ms/11AWkp7 Screencasthttp://vimeo.com/61329170 FilesFor easy installation, download and run the MSI file. If you want to manually install, a ZIP file is provided. ChangeLog *Version 1.1.25 Changed Module name to Visio. So to import the module use Import-Module Visio Replaced Invoke-VisioDraw with Out-Visio *Version 1.1.25 fixed Get-VisioCustomProperties *Version 1.1.23 Fixed a logging bug - was dividing by zero when operations were done ...Extended T-SQL Collector: 1.1.5: Modified to allow collecting system collection sets where the "Generic T-SQL Query collector type" is used. Pick the bitness of your SQL Server installation. If you have a 32 bit SQL Server instance installed on a 64 bit Windows Server, use the x86 setup kit. Both setup kits install the same exact code, but the target directory is different on x64 machines ("Program Files" for x64 and "Program Files (x86)" for x86).EdiFabric: Release 3.1: Fixed parse tree generation for the latest validation schemasCompare .NET Objects: Version 2.03.0.0: Support for System.Drawing.Font type New Option to Ignore Unknown Object TypesQuickMon: Version 3.11: This release adds some major changes to the core monitoring engine. 1. Polling overrides: Each collector entry can specify a minimum time updating is allowed for it and dependent collector entries. 2. Polling frequency sliding: Additional to polling overrides a collector entry can specify 'sliding' polling frequency if the state remains the same. This means the frequency slows down reducing overhead of polling on a stagnant resource. 3. The monitor pack has an overriding frequency. If used...Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.WordMat: WordMat v. 1.06: Check WordMat.blogspot.com for a complete description of new features.Wsus Package Publisher: Release v1.3.1405.17: Add Russian translation (thanks to VSharmanov) Fix a bug that make WPP to crash if the user click on "Connect/Reload" while the Report Tab is loading. Enhance the way WPP store the password for remote computers command.MoreTerra (Terraria World Viewer): More Terra 1.12.9: =========== = Compatibility = =========== Updated to account for new format 1.2.4.1 =========== = Issues = =========== all items have not been added. Some colors for new tiles may be off. I wanted to get this out so people have a usable program.LINQ to Twitter: LINQ to Twitter v3.0.3: Supports .NET 4.5x, Windows Phone 8.x, Windows 8.x, Windows Azure, Xamarin.Android, and Xamarin.iOS. New features include Status/Lookup, Mute APIs, and bug fixes. 100% Twitter API v1.1 coverage, Async, Portable Class Library (PCL).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.26.0: Added access to the Release Notes during 'Check for Updates...'' Debug panels Added support for generic types members Members are grouped into 'Raw View' and 'Non-Public members' categories Implemented dedicated (array-like) view for Lists and Dictionaries http://download-codeplex.sec.s-msft.com/Download?ProjectName=csscriptnpp&DownloadId=846498ClosedXML - The easy way to OpenXML: ClosedXML 0.70.0: A lot of fixes. See history.SFDL.NET: SFDL.NET (2.2.9.2): Changelog: Neues Icon Xup.in CnL Plugin BugfixSEToolbox: SEToolbox 01.030.008 Release 1: Fixed cube editor failing to apply color to cubes. Added to cube editor, replace cube dialog, and Build Percent dialog. Corrected for hidden asteroid ore, allowing rare ore to show when importing an asteroid, or converting a 3d model to an asteroid (still appears to be limitations on rare ore in small asteroids). Allowed ore selection to Asteroid file import. (Can copy/import and convert existing asteroid to another ore). Added progress bars to common long running operations. Fixed ...New Projects.Net Flexport: Library for importing and exporting data from and to csv or text files using attributes to describe the export format.Chess Platform: Simple Chess Platform with basic players and GUI.DMEditor: DMEditor is a "kit librarian" for the Alesis DM10 electronic drum module, allowing you to save and load drum kits, individual instruments, or even full modules.Endomondo Export: Endomondo GPX TCX activity exporter / downloaderHunt for Red October HTW: Hunting the Red October (Wumpus) at Microsoft 2014JuegoIngenio: ALTO JUEGOOrchard Liquid Markup: Orchard module for adding support for templates written in Liquid Markup (http://liquidmarkup.org/). Uses DotLiquid (http://dotliquidmarkup.org/).Panorama: No summaryPunto de Venta TCU: Sistema Punto de VentaString.Format Diagnostic (Roslyn): The aim of the project is to enable "Roslyn" diagnostics for the validation of the formatstring supplied to String.Format.System Layer: Operating System abstraction layer which will enable developers to create applications and device drivers which run on virtually any platform.XiaoQingDao: XiaoQingDao????????-????????【??】????????????: ??????????????,????,??????????? ???? ???? ?????????,???,??,?????! ??????-??????【??】??????????: ?????????? ???? ???? ???? ???? ???? ??????? ?????，????????????????. ??????-??????【??】??????????: ???????????????:?????? ???? ??????,???????,??????,???????。 ??????-??????【??】??????????: ????????,??????:?????,?????,??????,??????????,????????。????????! ??????-??????【??】??????????: ??????????????????、????,??100%????,??????,????????????,???????????! ??????-??????【??】??????????: ????????????????????,??????????,????????、????,??????????,??????????。 ???????-???????【??】???????????: ???????????????????、????、??????、????????,????????????,???????????！ ???????-???????【??】???????????: ????????????????、????、????、??????、????、???????,?????,?????????! ???????-???????【??】???????????: ????????????????????????????,???????????????????????,???????。 ??????-??????【??】??????????: ??????,??,????????。 ... ??????????????????、??????????????????... ??????-??????【??】??????????: ?????????????,??,??,??,??? ?,??,,??,??,??,??,??,??,????????,??????！ ??????-??????【??】??????????: ????????????????????,?????,???????,???????????,??????! ??????-??????【??】??????????: ???????????,?????????????? ??。????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ???????????????????????:????、????、??????????????,????????。????????! ??????-??????【??】??????????: ????????????????????????,??????????,????,????,?????????、??????,??????。 ??????-??????【??】??????????: ???????????、????、????、??????????,???,?????,???????????????. ??????-??????【??】??????????: ???????????????,????,???????、???????????,???????????,????,?????,???????。 ??????-??????【??】??????????: ????????????????,?????????、??、??、????,??????????,?????????????！ ????: 《????》（c???）??“????”???????，???????????????C?????????。???????,???????????????????????. ??????????????????????????????????；????????????????????????????。??????-??????【??】??????????: ?????????????????,???????????????。?????????????,???????,?????????。 ??????-??????【??】??????????: ??????????????????,??:??????,????,????,????,?????,??????????????. ??????-??????【??】??????????: ????????????????????,?????????????,???????????.????????????,????????????! ??????-??????【??】??????????: ??????,?????????,?????????????。?????????????,?????????,???????。 ??????-??????【??】??????????: ??????????????:????,????,????,???????,????????,??????:????????,?????! ??????-??????【??】??????????: ??????????????????????????,???????????????,????????????????！ ??????-??????【??】??????????: ???????????????????,????,????,????,???????,?????,?????.??????。 ??????-??????【??】??????????: ??????????,????????,?????,???,???????????,???????????,?????,??????！ ??????-??????【??】??????????: ????????????????????????????:???????,??????,????,????,????,?????！ ??????-??????【??】??????????: ??????????????????,???????、????、????、??????、???????,??????,???????????。 ??????-??????【??】??????????: ????????????????,???????、???????????,????????,????,?????????,??????,??????! ??????-??????【??】??????????: ?????????????????,????????????,?????????????????,??????,????????! ??????-??????【??】??????????: ??????????????,?????????????,????,?????????,?????????????,?????,?????! ??????-??????【??】??????????: ?????????????????????,????,????,??????????。???????????????,??,??,??????????,??????... ??????-??????【??】??????????: ?????????????????,???????????????。???????????,??????:????、????、???????！ ???????-???????【??】???????????: ?????????????????????,???、???!???????,????????????????,????????????,???! ???????-???????【??】???????????: ????????????、?????、?????、?????、?????、????,???????????,?????,??????！ ???????-???????【??】???????????: ?????????????????,?????????????? ??。??????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ??????????,??????????????????????,???????????????,?????????????！ ??????-??????【??】??????????: ??????????????????????,?????, ... ????????????,????,????,?????,???????。 ??????-??????【??】??????????: ????????????????，?????????/?,,???????????,??????????????! ???? (?????): ???: ????（?????）??????-??????【??】??????????: ?????????????、?????、?????、????、?????,??????????。????????????????! ??????-??????【??】??????????: ??????????????????,???????????,??????????????,??????????，??????????????！ ??????-??????【??】??????????: ??????????????????,????????????,?????、??、????,?????,??????！ ??????-??????【??】??????????: ??????????????????????,???????????????,????????????????????! ??????-??????【??】??????????: ????????????,??????????、??????,??????????、????、????、???????。 ??????-??????【??】??????????: ??????????????????????,???????????????,???????,?????,?????,????? !!! ??????-??????【??】??????????: ?????????????????,????:????,????,????,??????,?????,???????????????! ??????-??????【??】??????????: ?????????????????"????,????"???,????????????????????????,??????????????。 ??????-??????【??】??????????: ???????????????????????????、??????????????,??????????????。 ??????-??????【??】??????????: ????????????????????????、??????,????、?????、????， ?????????，?????????????！ ??????-??????【??】??????????: ????????,??????,?????????????????????,???????????????????????。 ??????-??????【??】??????????: ?????????????????????、????、????、??????、???????,??????、??????。 ??——?????: None

Read the article

CLR 4.0: Corrupted State Exceptions

- by Scott Dorman

Corrupted state exceptions are designed to help you have fewer bugs in your code by making it harder to make common mistakes around exception handling. A very common pattern is code like this: public void FileSave(String name) { try { FileStream fs = new FileStream(name, FileMode.Create); } catch (Exception e) { MessageBox.Show("File Open Error"); throw new Exception(IOException); } The standard recommendation is not to catch System.Exception but rather catch the more specific exceptions (in this case, IOException). While this is a somewhat contrived example, what would happen if Exception were really an AccessViolationException or some other exception indicating that the process state has been corrupted? What you really want to do is get out fast before persistent data is corrupted or more work is lost. To help solve this problem and minimize the chance that you will catch exceptions like this, CLR 4.0 introduces Corrupted State Exceptions, which cannot be caught by normal catch statements. There are still places where you do want to catch these types of exceptions, particularly in your application’s “main” function or when you are loading add-ins. There are also rare circumstances when you know code that throws an exception isn’t dangerous, such as when calling native code. In order to support these scenarios, a new HandleProcessCorruptedStateExceptions attribute has been added. This attribute is added to the function that catches these exceptions. There is also a process wide compatibility switch named legacyCorruptedStateExceptionsPolicy which when set to true will cause the code to operate under the older exception handling behavior. Technorati Tags: CLR 4.0, .NET 4.0, Exception Handling, Corrupted State Exceptions

Read the article

Clients with multiple proxy and multithreading callbacks

- by enzom83

I created a sessionful web service using WCF, and in particular I used the NetTcpBinding binding. In addition to methods to initiate and terminate a session, other methods allow the client to send to one or more tasks to be performed (the results are returned via callback, so the service is duplex), but they also allow you to know the status of the service. Assuming you activate the same service on multiple endpoints, and assuming that the client knows these endpoints (for example, it could maintain a List of endpoints), the client should connect with one or more replicas of the same service. The client periodically updates the status of the service, so when it needs to perform a new task (the task is submitted by the user via UI), it selects the service currently less loaded and sends the task to it. Periodically, the client also initiates a maintenance procedure in order to disconnect from one or more overloaded service and in order to connect with new services. I created a client proxy using the svcutil tool. I wish each proxy can be used simultaneously by different threads, for example, in addition to the thread that submits the tasks using a proxy, there are also the following two threads which act periodically: a thread that periodically sends a request to the service in order to obtain the updated state; a thread that periodically selects a proxy to close and instantiates a new proxy to replace the closed one. To achieve these objectives, is it sufficient to create an array of proxies and manage their opening and closing in separate threads? I think I read that the proxy method calls are thread safe, so I would not need to perform a lock before requesting updates to the service. However, when the maintenance procedure (which is activated on its own thread) decides to close a proxy, should I perform a lock? Finally, each proxy is also associated with an object that implements the callback interface for the service: are the callbacks (invoked on the client) executed on different threads on the client? I would like to wrap the management of the proxy in one or more classes so that it can then easily manage within a WPF application.

Read the article

Kent .Net/SqlServer User Group – Upcoming events

- by Dave Ballantyne

At the Kent user group we have two upcoming events. Both are to be held at F-Keys Training suite http://f-keys.co.uk/ in Rochester, Kent. If you haven’t attended before please note the location here. 14-June Is your code S.O.L.I.D ? Nathan Gloyn Everybody keeps on about SOLID principles but what are they? and why should you care? This session is an introduction to SOLID and I'll aim to walk through each principle telling you about that principle and then show how a code base can be refactored using the principles to make your life easier, Come the end of the session you should have a basic understanding of the principle, why to use it and how using it can improve your code. Building composite applications with OpenRasta 3 Sebastien Lambla A wave of change is coming to Web development on .NET. Packaging technologies are bringing dependency management to .NET for the first time, streamlining development workflow and creating new possibilities for deployment and administration. The sky's the limit, and in this session we'll explore how open frameworks can help us leverage composition for the web. Register here for this event http://www.eventbrite.com/event/1643797643 05-July Tony Rogerson Achieving a throughput of 1.5Terabytes or over 92,000 8Kbyte of 100% random reads per second on kit costing less that 2.5K, and of course what to do with it! The session will focus on commodity kit and how it can be used within business to provide massive performance benefits at little cost. End to End Report Creation and Management using SQL Server Reporting Services Chris Testa-O'NeillThis session will walk through the authoring, management and delivery of reports with a focus on the new features of Reporting Services 2008 R2. At the end of this session you will understand how to create a report in the new report designer. Be aware of the Report management options available and the delivery mechanisms that can be used to deliver reports. Register here for this event http://www.eventbrite.com/event/1643805667 Hope to see you at one or other ( or even both if you are that way inclined).

Read the article

SEO Keyword Research Help

- by James

Hi Everyone, I'm new at SEO and keyword research. I am using Market Samurai as my research tool, and I was wondering if I could ask for your help to identify the best key word to target for my niche. I do plan on incorporating all of them into my site, but I wanted to start with one. If you could give me your input on these keywords, I would appreciate it. This is all new to me :) I'm too new to post pictures, but here are my keywords (Searches, SEO Traffic, and SEO Value / Day): Searches | SEO Traffic | PBR | SEO Value | Average PR/Backlinks of Current Top 10 1: 730 | 307 | 20% | 2311.33 | 1.9 / 7k-60k 2: 325 | 137 | 24% | 822.94 | 2.3 / 7k-60k 3: 398 | 167 | 82% | 589.79 | 1.6 / 7k-60k I'm wondering if the PBR (Phrase-to-broad) value of #1 is too low. It seems like the best value because the SEOV is crazy high. That is like $70k a month. #3 has the highest PBR, but also the lowest SEOV. #2 doesn't seem worth it because of the PR competetion. Might be a little too hard to get into the top page of Google. I'm wondering which keywords to target, and if I should be looking at any other metric to see if this is a profitable niche to jump into. Thanks.

Read the article

Setting up VPS: How to configure name servers

- by MeltingDog

So I got a VPS set up (LAMP) and have transfered a couple of sites over. Now I want to point my domain names from the old host to the new VPS host, which does not have any name servers yet. On my registrars console I have set the domain name 'www.mydomain.com' domain host settings to point to my VPS's ip address, eg: ns1.mydomain.com = 111.222.3.4 and ns2.mydomain.com = 111.222.3.4 I then lowered the TTL to one hour. I then switched the Nameservers on that domain to these new ones. (ns1/2.mydomain.com) In WHM I then set the servers name servers to ns1.mydomain.com and ns2.mydomain.com. I waited an hour to test...but nothing changed - the domain name still directed to the old host. Have I missed something? Is the some other record I need to change on the DNS? I find this very confusing, does anyone know a resource or can provide a step by step guide on how to configure a new servers nameservers? Thanks EDIT: added image (sorry bout the censoring. Client insists) On my regisrars console: And on my VPS' WHM:

Read the article

Decoupling software components via naming convention

- by csteinmueller

I'm currently evaluating alternatives to refactor a drivermanagement. In my multitier architecture I have Baseclass DAL.Device //my entity Interfaces BL.IDriver //handles the dataprocessing between application and device BL.IDriverCreator //creates an IDriver from a Device BL.IDriverFactory //handles the driver creation requests Every specialization of Device has a corresponding IDriver implementation and a corresponding IDriverCreator implementation. At the moment the mapping is fix via a type check within the business layer / DriverFactory. That means every new driver needs a) changing code within the DriverFactory and b) referencing the new IDriver implementation / assembly. On a customers point of view that means, every new driver, used or not, needs a complex revalidation of their hardware environment, because it's a critical process. My first inspiration was to use a caliburn micro like nameconvention see Caliburn.Micro: Xaml Made Easy BL.RestDriver BL.RestDriverCreator DAL.RestDevice After receiving the RestDevicewithin the IDriverFactory I can load all driver dlls via reflection and do a namesplitting/comparing (extracting the xx from xxDriverCreator and xxDevice) Another idea would be a custom attribute (which also leads to comparing strings). My question: is that a good approach above layer borders? If not, what would be a good approach?

Read the article

C#/.NET Little Wonders: Skip() and Take()

- by James Michael Hare

Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. I’ve covered many valuable methods from System.Linq class library before, so you already know it’s packed with extension-method goodness. Today I’d like to cover two small families I’ve neglected to mention before: Skip() and Take(). While these methods seem so simple, they are an easy way to create sub-sequences for IEnumerable<T>, much the way GetRange() creates sub-lists for List<T>. Skip() and SkipWhile() The Skip() family of methods is used to ignore items in a sequence until either a certain number are passed, or until a certain condition becomes false. This makes the methods great for starting a sequence at a point possibly other than the first item of the original sequence. The Skip() family of methods contains the following methods (shown below in extension method syntax): Skip(int count) Ignores the specified number of items and returns a sequence starting at the item after the last skipped item (if any). SkipWhile(Func<T, bool> predicate) Ignores items as long as the predicate returns true and returns a sequence starting with the first item to invalidate the predicate (if any). SkipWhile(Func<T, int, bool> predicate) Same as above, but passes not only the item itself to the predicate, but also the index of the item. For example: 1: var list = new[] { 3.14, 2.72, 42.0, 9.9, 13.0, 101.0 }; 2: 3: // sequence contains { 2.72, 42.0, 9.9, 13.0, 101.0 } 4: var afterSecond = list.Skip(1); 5: Console.WriteLine(string.Join(", ", afterSecond)); 6: 7: // sequence contains { 42.0, 9.9, 13.0, 101.0 } 8: var afterFirstDoubleDigit = list.SkipWhile(v => v < 10.0); 9: Console.WriteLine(string.Join(", ", afterFirstDoubleDigit)); Note that the SkipWhile() stops skipping at the first item that returns false and returns from there to the rest of the sequence, even if further items in that sequence also would satisfy the predicate (otherwise, you’d probably be using Where() instead, of course). If you do use the form of SkipWhile() which also passes an index into the predicate, then you should keep in mind that this is the index of the item in the sequence you are calling SkipWhile() from, not the index in the original collection. That is, consider the following: 1: var list = new[] { 1.0, 1.1, 1.2, 2.2, 2.3, 2.4 }; 2: 3: // Get all items < 10, then 4: var whatAmI = list 5: .Skip(2) 6: .SkipWhile((i, x) => i > x); For this example the result above is 2.4, and not 1.2, 2.2, 2.3, 2.4 as some might expect. The key is knowing what the index is that’s passed to the predicate in SkipWhile(). In the code above, because Skip(2) skips 1.0 and 1.1, the sequence passed to SkipWhile() begins at 1.2 and thus it considers the “index” of 1.2 to be 0 and not 2. This same logic applies when using any of the extension methods that have an overload that allows you to pass an index into the delegate, such as SkipWhile(), TakeWhile(), Select(), Where(), etc. It should also be noted, that it’s fine to Skip() more items than exist in the sequence (an empty sequence is the result), or even to Skip(0) which results in the full sequence. So why would it ever be useful to return Skip(0) deliberately? One reason might be to return a List<T> as an immutable sequence. Consider this class: 1: public class MyClass 2: { 3: private List<int> _myList = new List<int>(); 4: 5: // works on surface, but one can cast back to List<int> and mutate the original... 6: public IEnumerable<int> OneWay 7: { 8: get { return _myList; } 9: } 10: 11: // works, but still has Add() etc which throw at runtime if accidentally called 12: public ReadOnlyCollection<int> AnotherWay 13: { 14: get { return new ReadOnlyCollection<int>(_myList); } 15: } 16: 17: // immutable, can't be cast back to List<int>, doesn't have methods that throw at runtime 18: public IEnumerable<int> YetAnotherWay 19: { 20: get { return _myList.Skip(0); } 21: } 22: } This code snippet shows three (among many) ways to return an internal sequence in varying levels of immutability. Obviously if you just try to return as IEnumerable<T> without doing anything more, there’s always the danger the caller could cast back to List<T> and mutate your internal structure. You could also return a ReadOnlyCollection<T>, but this still has the mutating methods, they just throw at runtime when called instead of giving compiler errors. Finally, you can return the internal list as a sequence using Skip(0) which skips no items and just runs an iterator through the list. The result is an iterator, which cannot be cast back to List<T>. Of course, there’s many ways to do this (including just cloning the list, etc.) but the point is it illustrates a potential use of using an explicit Skip(0). Take() and TakeWhile() The Take() and TakeWhile() methods can be though of as somewhat of the inverse of Skip() and SkipWhile(). That is, while Skip() ignores the first X items and returns the rest, Take() returns a sequence of the first X items and ignores the rest. Since they are somewhat of an inverse of each other, it makes sense that their calling signatures are identical (beyond the method name obviously): Take(int count) Returns a sequence containing up to the specified number of items. Anything after the count is ignored. TakeWhile(Func<T, bool> predicate) Returns a sequence containing items as long as the predicate returns true. Anything from the point the predicate returns false and beyond is ignored. TakeWhile(Func<T, int, bool> predicate) Same as above, but passes not only the item itself to the predicate, but also the index of the item. So, for example, we could do the following: 1: var list = new[] { 1.0, 1.1, 1.2, 2.2, 2.3, 2.4 }; 2: 3: // sequence contains 1.0 and 1.1 4: var firstTwo = list.Take(2); 5: 6: // sequence contains 1.0, 1.1, 1.2 7: var underTwo = list.TakeWhile(i => i < 2.0); The same considerations for SkipWhile() with index apply to TakeWhile() with index, of course. Using Skip() and Take() for sub-sequences A few weeks back, I talked about The List<T> Range Methods and showed how they could be used to get a sub-list of a List<T>. This works well if you’re dealing with List<T>, or don’t mind converting to List<T>. But if you have a simple IEnumerable<T> sequence and want to get a sub-sequence, you can also use Skip() and Take() to much the same effect: 1: var list = new List<double> { 1.0, 1.1, 1.2, 2.2, 2.3, 2.4 }; 2: 3: // results in List<T> containing { 1.2, 2.2, 2.3 } 4: var subList = list.GetRange(2, 3); 5: 6: // results in sequence containing { 1.2, 2.2, 2.3 } 7: var subSequence = list.Skip(2).Take(3); I say “much the same effect” because there are some differences. First of all GetRange() will throw if the starting index or the count are greater than the number of items in the list, but Skip() and Take() do not. Also GetRange() is a method off of List<T>, thus it can use direct indexing to get to the items much more efficiently, whereas Skip() and Take() operate on sequences and may actually have to walk through the items they skip to create the resulting sequence. So each has their pros and cons. My general rule of thumb is if I’m already working with a List<T> I’ll use GetRange(), but for any plain IEnumerable<T> sequence I’ll tend to prefer Skip() and Take() instead. Summary The Skip() and Take() families of LINQ extension methods are handy for producing sub-sequences from any IEnumerable<T> sequence. Skip() will ignore the specified number of items and return the rest of the sequence, whereas Take() will return the specified number of items and ignore the rest of the sequence. Similarly, the SkipWhile() and TakeWhile() methods can be used to skip or take items, respectively, until a given predicate returns false. Technorati Tags: C#, CSharp, .NET, LINQ, IEnumerable<T>, Skip, Take, SkipWhile, TakeWhile

Read the article

ArchBeat Link-o-Rama for 11/11/2011

- by Bob Rhubart

3 SOA business cases, explained in a 2-minute elevator speech | Joe McKendrick Impress your CEO — maybe even the CFO — with some quick examples of SOA making a difference to the business. ADF Faces - a logic bomb in the order of bean instantiations | Chris Muir Oracle ACE Director Chris Muir shares the details on "an interesting ADF logic bomb" discovered by one of his colleagues. 5 key trends in cloud computing's future | David Linthicum "'Cloud computing' will become just 'computing' at some point," says Linthicum, "but it will still be around as an approach to computing." What's New with XBRL? | John O'Rourke John O'Rourke shares highlights and key take-aways from the XBRL US Conference in Nashville and the XBRL International Conference in Montreal. Siri-ous Business: Enterprise Apps and Global UX Considerations | Ultan O'Broin Ultan O'Broin ponders "the enterprise applications user experience (UX) implications of Siri" and "the global UX aspects to the Siri potential." These are 11 of my favorite things! | Mike Gerdts Gerdts introduces his 11 favorite things about zones in Solaris 11. The Power of Social Recommendations | Peter Reiser "Do you really want to invest to drive YOUR audience trough public social networks," asks Reiser, "or do you want to have YOUR audience on your own social network which is seamless integrated with your web properties and business applications." Fourth Key Attribute of Cloud Computing - Provisioning | Tom Laszewski "Self-service provisioning of computing infrastructure in a cloud infrastructure is also very desirable as it can cut down the time it takes to deploy new infrastructure for a new application or scale up/down infrastructure for an existing application," says Tom Laszewski. Oracle Utilities Application Framework Whitepaper List as of November 2011 | Anthony Shorten Anthony Shorten shares an updated and nicely detailed list of Oracle Utilities Application Framework white papers. Down from the Tower; Information Integration Conversation; By the Time the Architects get to Phoenix This week on the Oracle Technology Network Architect Home Page.

Read the article

Register for a free webcast presented by ISC2: Identity Auditing Techniques for Reducing Operational Risk and Internal Delays

- by Darin Pendergraft

Join us tomorrow, June 26 @ 10:00 am PST for Part 1 of a 3 part security series co-presented by ISC2 Part 1 will deal focus on Identity Auditing techniques and will be delivered by Neil Gandhi, Principal Product Manager at Oracle and Brandon Dunlap, Managing Director at Brightfly Register for Part 1: Identity Auditing Techniques for Reducing Operational Risk and Internal Delays ... Part 2 will focus on how mobile device access is changing the performance and workloads of IDM directory systems and will be delivered by Etienne Remillon, Senior Principal Product Manager at Oracle, and Brandon Dunlap, Managing Director at Brightfly Register for Part 2: Optimizing Directory Architecture for Mobile Devices and Applications ... Finally, Part 3 will focus on what you need to do to support native mobile communications and security protocols and will be presented by Sid Mishra, Senior Principal Product Manager at Oracle, and Brandon Dunlap, Managing Director at Brightfly. Register for Part 3: Using New Design Patterns to Improve Mobile Access Control Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

Oracle Partner Days and Oracle Days are coming to a city in EMEA near you!

- by Javier Puerta

Oracle Partner Days A new round of Oracle Partner Days is coming to a large number of European cities. These events are exclusive for Oracle partners and will deliver to you real Business return on your OPN membership.You will hear the business opportunities coming from the adoption of the entire Oracle stack, the latest products value propositions and related sales strategy and be able to connect directly with Oracle executives and find new business opportunities with other partners in your region.The EMEA Oracle Partner Days are Local/Regional live events targeting the key contacts in sales and consultancy delivering Oracle strategy, engaging around the several perspectives of the Oracle portfolio, executive keynotes and deep dive Business content-related breakout sessions. The first city will be Frankfurt, on Oct. 29. Check the full list to find an Oracle Partner Day in a city near you. Oracle Days Oracle Days will be hosted after Oracle OpenWorld across EMEA, along October and November. By attending an Oracle Day, customers and partners can: Learn about how to leverage the power of the Oracle stack, by hearing customer case studies about successful business transformation, and by following cross-stack solution tracks within the agenda Discuss key issues for business and IT executives in cloud, big data, social, and mobile solutions, and network with peers who are facing the same challenges Meet Oracle experts and watch live demos of new products Get the latest news from Oracle OpenWorld. See full calendar and cities here

Read the article

SSMS Tools Pack 2.5 is out. Added support for SQL Server 2012.

- by Mladen Prajdic

Because I wanted to make SSMS Tools Pack as solid as possible for SSMS 2012 there are no new features only bug fixes and speed improvements. I am planning new awesome features for the next version so be on the lookout. The biggest change is that SSMS Tools Pack for SSMS 2012 is no longer free. For previous SSMS versions it is still free. Licensing now offers following options: Per machine license. ($29.99) Perfect if you do all your work from a single machine. This license is valid per major release of SSMS Tools Pack (e.g. v2.x, v3.x, v4.x). Fully transferable license valid for 3 months. ($99.99) Perfect for work across many machines. It's not bound to a machine or an SSMS Tools Pack version. 30 days license. Time based demo license bound to a machine. You can view all the details on the Licensing page. If you want to receive email notifications when new version of SSMS Tools Pack is out you can do that on the Main page or on the Download page. This is also the last version to support SSMS 2005 and 2005 Express. Enjoy it!

Read the article

GetData() error creating framebuffer

- by Lelezeus

I'm currently porting a game written in C# with XNA library to Android with Monogame. I have a Texture2D and i'm trying to get an array of uint in this way: Texture2d textureDeform = game.Content.Load<Texture2D>("Texture/terrain"); uint[] pixelDeformData = new uint[textureDeform.Width * textureDeform.Height]; textureDeform.GetData(pixelDeformData, 0, textureDeform.Width * textureDeform.Height); I get the following exception: System.Exception: Error creating framebuffer: Zero at Microsoft.Xna.Framework.Graphics.Texture2D.GetTextureData (Int32 ThreadPriorityLevel) [0x00000] in :0 I found that the problem is in private byte[] GetTextureData(int ThreadPriorityLevel) creating the framebuffer: private byte[] GetTextureData(int ThreadPriorityLevel) { int framebufferId = -1; int renderBufferID = -1; GL.GenFramebuffers(1, ref framebufferId); // framebufferId is still -1 , why can't be created? GraphicsExtensions.CheckGLError(); GL.BindFramebuffer(All.Framebuffer, framebufferId); GraphicsExtensions.CheckGLError(); //renderBufferIDs = new int[currentRenderTargets]; GL.GenRenderbuffers(1, ref renderBufferID); GraphicsExtensions.CheckGLError(); // attach the texture to FBO color attachment point GL.FramebufferTexture2D(All.Framebuffer, All.ColorAttachment0, All.Texture2D, this.glTexture, 0); GraphicsExtensions.CheckGLError(); // create a renderbuffer object to store depth info GL.BindRenderbuffer(All.Renderbuffer, renderBufferID); GraphicsExtensions.CheckGLError(); GL.RenderbufferStorage(All.Renderbuffer, All.DepthComponent24Oes, Width, Height); GraphicsExtensions.CheckGLError(); // attach the renderbuffer to depth attachment point GL.FramebufferRenderbuffer(All.Framebuffer, All.DepthAttachment, All.Renderbuffer, renderBufferID); GraphicsExtensions.CheckGLError(); All status = GL.CheckFramebufferStatus(All.Framebuffer); if (status != All.FramebufferComplete) throw new Exception("Error creating framebuffer: " + status); ... } The frameBufferId is still -1, seems that framebuffer could not be generated and I don't know why. Any help would be appreciated, thank you in advance.

Search Results

Search found 89481 results on 3580 pages for 'new technology'.

Page 701/3580 | < Previous Page | 697 698 699 700 701 702 703 704 705 706 707 708 | Next Page >

- by dwahlin

- by niels

- by cubrman

- by S B

- by Alois Kraus

- by FormsEleven

- by John Webb

- by Mathias Hölzl

- by mark

- by Miloud B.

- by bullettime

- by martin.abrahams

- by Scott Dorman

- by enzom83

- by Dave Ballantyne

- by James

- by MeltingDog

- by csteinmueller

- by James Michael Hare

- by Bob Rhubart

- by Darin Pendergraft

- by Javier Puerta

- by Mladen Prajdic

- by Lelezeus

< Previous Page | 697 698 699 700 701 702 703 704 705 706 707 708 | Next Page >