Search Results

Search found 19904 results on 797 pages for 'software enthusiastic'.

Page 701/797 | < Previous Page | 697 698 699 700 701 702 703 704 705 706 707 708  | Next Page >

• External HDD incorrectly detected as internal - how change to enable hot swap/eject?

  - by Sam

  I have win 7 x64 Home Prem. The HDD is a seagate barracuda, 7200.7 ST3120827AS. 3.5", Serial: 3ms006n6, Firmware: 3.42 (no further updates) NexStar CX External case (drivers installed). I have three drives: WD320 with OS installed WD750 data storage (internal) seagate 120 (external) - connected via esata board connected to sata on motherboard (MSI p43 neo) Tried uninstalling HDD in device manager to no effect. Also the internal WD750 is detected as an external drive and win taskbar icon allows for it to be ejected (unlike the seagate). All drives are configured - Online, Simple, Basic, NTFS, Active, Primary Partition (except c drive). The seagate was previously used as a primary disk with XP operating system so I deleted the volume and created/reformatted (not quick). HDD is no longer "Active". But did not fix problem. Background Originally, I installed win 7 with the bios set to IDE and forgot to install the chipset drivers. Then I changed win 7 to install the AHCI drivers, changed the bios to AHCI and rebooted. Win 7 loaded drivers but WD HDD gave problems/crashed. I installed chipset drivers and latest intell storage matrix software thingie (in safe mode). Everything worked fine after that except for the problem of not corrrectly detecting the external drive] I have noticed that under the driver properties (and similarly in the registry) the two drives are configured differently (e.g. in driver details property capabilities for the WD the value is set to 0000006, CM_DEVCAP_REMOVABLE & EJECTSUPPORTED - whereas the seagate shows 0000080 & CM_DEVCAP_SURPRISEREMOVALOK). Any easy way to configure things? I tried physically swapping the sata connections on the mainboard without success So far I have found that a solution to my problem might be to perform some reg changes: How do I remove the option to eject SATA drives from the Windows 7 tray icon?

  Read the article

• How I can recover files when the folder shows empty but the files are not deleted?

  - by Borror0

  Yesterday, my laptop caught a virus which caused massive damage. Since them, I have been trying to recover important files before reformatting my computer, a task the virus has not made easy. Restoration points predating the attack have been deleted. Most of my folders show empty. My Start menu is essentially empty, with the exception of Trillian and Mirror's Edge. The same goes for my Desktop, which only has programs which were installed after the attack. Searching for files though my computer is pretty much useless, as it only rarely brings up anything. I suspect most of my files have not been deleted. While my folders show empty, uTorrent still does display them and I can open them from here. Unfortunately, when I select Open Containing Folder, the folder still shows as completely empty even if I'm currently watching a video from that very folder. Further adding evidence to the not-deleted, just-missing theory, the data recovery software I'm using (Restoration) cannot find only find an handful of the missing files. If they were deleted, I could do a forensic recovery to get them back but since they're probably still somewhere on my computer, just out out of my reach, I can't find them. Under those circumstances, is there a way I can recover those files?

  Read the article

• iTunes Home Sharing only works one way between 2 Windows XP PC's on the same LAN

  - by scunliffe

  Both PC's have the latest iTunes installed. PC (A) can "see" that there is a shared library "B library" but attempts to connect to it return this error message: The shared library "{Username}'s Library" is not responding (-3259) Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689. however the reverse works fine. e.g. PC (B) can "see" shared library "A library" and can access all content. Notes: Both PC's have Home Sharing enabled (turned off/on several times to verify). Both PC's have Windows Firewall turned on, but in the exceptions tab, iTunes is allowed, and Port 3689 is also added as a firewall exception (just in case) Both iTunes accounts have been "authorized" on both PC's Both PC's connect via LAN via D-Link DIR-615 router. In the advanced application rules, iTunes has also been added to allow traffic on port 3689 un-hindered. Is there any other magical setting/configuration option that I should be aware of and set in order to get this to work? I could care less about sharing apps etc. I just want the music sharing to work. Update: Solved! It turns out on PC (B) there were multiple accounts set up. 1 of the accounts had the checkbox checked under the Windows firewall "On" option which states "No exceptions" thus even though it was added to the exception list on the main user account, this other account was blocking access.

  Read the article

• Hung Java JVM failing to respond to kill -3

  - by Hans

  I have a Java VM that is hanging "randomly". I quote the randomly bit, because there is obviously a reason that the VM is hanging, but the hang does not occur periodically. We have the same software running in different customer environments and in those environments the JVM is not hanging. In the process of attempting to troubleshoot the hang the process exists with zero CPU utilization. I then attempt to execute kill -3 and the kill command hangs. No JVM Thread Dump is produced. I have spent time instrumenting the code to periodically log the thread stack traces hoping to catch the JVM in a state that would indicate where the issue lies, but so far this attempt has not born much fruit. Unfortunately I have not been able to reproduce this issue in my lab environment so I am limited by what can be done at the Customer site. The OS's in question are Red Hat Enterprise 5.4 and SUSE 10 running java version 1.6.0_05-b13 Has anyone had this problem? Any ideas on why kill -3 is failing to produce a Java Thread Dump? Thanks!

  Read the article

• Enlarging everything on 16" 1920x1080 notebook display in Windows 7

  - by Rob

  Does Windows 7 have an option to enlarge everything on the screen, e.g. via a spi setting? How well does this work? i.e. do the objects look clear when enlarged? I ask this because sometimes software that enlarges non-photographic bitmap images e.g. icons and symbols can leave them artifacted with harsh jaggier slopes and blurred lines. I've tried the dpi setting in Windows XP but it doesn't enlarge everything, and some things are not so clear as described above. I'm looking at a notebook/laptop with this spec. I've already enjoyed using a 15.4" 1920x1200 display for 5 years. I've tried the dpi setting in Windows XP but it doesn't enlarge everything, and some things are not so clear as described above. I am buying a laptop for my father who will probably prefer larger objects on the screen, although I want to provide some future proofing by allowing more on the screen if needed. I'm not interested in answers that debate the effectiveness or otherwise merits of 1920x1080 on a 16" display, please. The alternative option of 1366x768 seems too little.

  Read the article

• What's the best way to get a stored POP3 password out of Outlook 2007?

  - by Tom Morris

  If you have a password for a POP3 account in Outlook 2007 (Windows 7 Home Premium) and you then forget the password, how do you retrieve it? I tried copy-and-paste. No go. I downloaded Mail PassView, but upon installing it, AVG said it was malware, so I removed it. I eventually found the account details by opening up RegEdit, and found it in HKCU\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem\Profiles\Outlook\ (...) but it was encoded in REG_BINARY. I Googled around and found various Visual Basic routines for decoding it but being a Unix dork I had absolutely no idea what to do with said scripts. By this point, I gave up and managed to get hold of the password by another means (it was written down on a piece of paper in the briefcase of the owner of the account - I know, it makes the inner sysadmin rage). I also attempted to write a simple POP3 server in Python and then get Outlook to log on to it, but that didn't really work out (it was about 4am at that point). For future reference, is there an easy and sensible way of doing this? Is Mail PassView actually evil spyware or was AVG just giving me a false positive? (Any chance of Windows 8 having something like OS X's Keychain?)

  Read the article

• Shoretel Upgrade Path

  - by Brian

  I currently have a Shoretel Server running Server 2003 x32 as a virtual machine paired with a ShoreGear 90 switch and another unused switch of the same model being reserved for manual failover. I am getting the software mailed to me from my partner, but with limited support since the server is in a relatively remote area. I am tempted to upgrade the OS at the same time as performing the upgrade, but want to know if there are any horror stories or advice I should know about before diving in. I'm upgrading from Shoretel 9.2 Build. I will be upgrading first to version 10.1 then finally to 11.1. The system has been bullet proof since it was installed and we are upgrading mainly to get a client that is a little more modern. My question boils down to: Should I even bother with an OS upgrade or even possibly a fresh install of Windows with an install of Shoretel 11.1 and just transfer the configuration? Should I just stay with Server 2003 since it is supported in my target version of Shoretel and the upgrade will be more than enough to keep me busy as a novice?

  Read the article

• How to send from my Z88 to my PC

  - by Bevan

  I've got a Cambridge Z88 that I want to get working with my PC. Around 6 years ago - in 2004 - I made heavy use of my Z88 to do a whole bunch of writing on the train while commuting to and from work. The Z88 is solid state, lightweight and has a full size silent keyboard, so it works very well as a writing instrument. I still have the serial cable I soldered up back then and used successfully in 2004. It has these connections: Z88 9 pin ----- ------- 2 TxD ------> RxD 2 3 RxD <------ TxD 3 7 GND <-----> GND 5 4 RTS ------> CTS 8 5 CTS <-+ RTS 7 8 DCD <-+---- DTR 4 9 DTR ----+-> DCD 1 +-> DSR 6 Unfortunately, I haven't been able to find my notes from 2004 that describe how I got it to work back then. I've spent several hours trying to Google a result, but to no avail. I'm pretty sure the cable is fine - after all, it's what I used successfully six years ago, and I've checked it out with a multimeter - so I'm focusing on the PC end of things, which is where I'd like some assistance. Q1: In my recent attempts, I've been using both Hyperterminal (as built into Windows XP) and the command line (copy com2: con:), but with no success. What's a good (better!) serial communications application to use? Is there one that allows me to see as deep as the signalling that's occurring on the wire? Q2: If you have a Z88 that works correctly with your PC, what software do you use on the PC end, and what's the pinout of your cable? I'm pretty sure that the Z88 itself is working properly: When using the built in Import/Export tool to send a file, I see different behaviour when my serial cable is connected compared to disconnected. When disconnected, the transmission appears to work, with a progress meter counting up and then finishing; when connected, nothing happens 'cept a timeout if I wait long enough.

  Read the article

• Faster, secure, protocol/code required for long-distance transfer.

  - by Chopper3

  I've ran into a problem and I'm looking for a new secure protocol/client/server that's faster over a 1Gb/s fibre link - let me tell you the story... I have a pair of redundant, diversely-routed, 1Gb/s links over a distance of around 250 miles or so (not dark fibre but a dedicated point to point link, not a mesh). At the 'client' end I have a HP DL380 G5 (2 x dual-core 2.66Ghz Xeon's, 4GB, Windows 2003EE 32-bit), at the 'server' end I have a HP BL460c G6 (2 x quad-core 2.53Ghz Xeons, 48GB, Oracle Linux 5.3 64-bit). I need to transfer around 500 x 2GB files per week from the client to the server machines per week - but the transfer NEEDS to be secure. Using both iPerf or regular FTP I can get ~80MB/s of transfer pretty consistently, which is great. Using WinSCP or Windows SFTP I can't seem to get more that ~3-4MB/s, at this point the server's CPU is 3% busy while CPU0 of the client goes to ~30% utilised. We've tried editing various TCP window sizes with little success. Both ends are connected to quite low-usage Cisco Cat6509's with Sup720's. I can replace the client machine with a newer machine and/or move it to Linux - but this will take time. Clearly these single-threaded secure Windows clients are introducing too much latency doing their encryption. So a few questions/thoughts; Are there any higher performing secure protocols or client software for Windows that I could try? I'm pretty protocol-gnostic so long as it'll work between Windows and Linux. Should I be using hardware to do the encryption, either in the client or the network parts? If so what would you recommend? I'm not convinced that just swapping the server would be that much faster, the CPU was only at 30% but then again that's higher than I'd have expected given the load - moving to Linux at the client end may be a better idea but would be quite disruptive. Am I missing a trick? Thanks in advance.

  Read the article

• Microsoft Mouse and Keyboard Center - Slow response for App-specific shortcuts

  - by Darrel Hoffman

  So a few months ago, I bought a new MS mouse, and was surprised that they'd discontinued Intellipoint in favor of this Microsoft Mouse and Keyboard Center. It seems to have the same functionality underneath all the bloat, but there's a very serious drawback - when I set up application-specific functions for the extra buttons on the mouse, they work, but sometimes with a very long delay, like up to a minute or more. For example, I often set up the left side button as an "Undo" in various programs for convenience. But sometimes, when I try to use that Undo button, nothing happens, so I'm forced to use the standard Ctrl-Z or whatever. But then, a minute or so later, it suddenly remembers that I hit that button a while back, and calls the Undo unexpectedly on something entirely different. It's infuriating. No modern computer function should be this slow. It's not the software or the computer itself, because doing an Undo via Ctrl-Z or the menu still works instantly. It's very definitely a side-effect of delayed response to the mouse button. Usually after it delays the first time, it'll work quickly after that, but if you haven't used a given shortcut in several minutes, it "forgets" again and you get another inexplicably long delay. Intellipoint never had this problem, but it's not supported any more, and not compatible with the newer mice. Has anyone else noticed slow-downs with MS M&K C and app-specific shortcuts? Any ideas how to get around this? I use these shortcuts extensively in my workflow and it's just entirely unacceptable to have such a long delay in what should be a pretty basic feature.

  Read the article

• How can I use my cell phone to establish a dial-up networking connection?

  - by gWiz

  I am using Windows 7 and have a BlackBerry with T-Mobile (U.S.). I have paired the phone with my computer over Bluetooth, which automatically creates a serial port for it. I am able to open the port in PuTTY and successfully issue AT commands to the modem, including dialing. However, while using Windows to create and establish a Dial-Up Networking connection, I get an error dialog stating "Error 678. The remote computer did not respond." In my testing, I also tried setting up a connection to dial a number connected to a phone. When attempting to connect over this connection, the phone does ring but the very moment I answer the call, my computer displays the above error dialog. What must be done to successfully establish such a PPP connection? Some special AT initialization string perhaps? To clarify, I'm not referring to the well-described and popular technique known as "tethering," in which the remote host of the data link is the mobile service provider. I am interested specifically in establishing direct data links with remote hosts other than my mobile service provider. Think old-school landline connection to your friend's computer or BBS. Edit 1 As grawity pointed out in comments, the missing piece of the puzzle is the actual modulator that is compatible with v-series protocols, which I expected to be built into the cellphone. So far the best only software alternative I could find is this experimental project. Edit 2 Found this forum discussion today. The participants state that there is no old-school modem in the BlackBerry. Edit 3 When I place a call in PuTTY with ATD, immediately after the call is answered (and the callee is initiating the handshake) the cellphone returns OK. This is not the expected behavior for establishing a data connection. The phone should reciprocate the handshake, and upon success return CONNECT. (Alternatively it should return BUSY or NO CARRIER, but never simply OK.) Windows DUN must be interpreting this as the "Error 678" I was seeing.

  Read the article

• RAID degraded on Ubuntu server

  - by reano

  We're having a very weird issue at work. Our Ubuntu server has 6 drives, set up with RAID1 as follows: /dev/md0, consisting of: /dev/sda1 /dev/sdb1 /dev/md1, consisting of: /dev/sda2 /dev/sdb2 /dev/md2, consisting of: /dev/sda3 /dev/sdb3 /dev/md3, consisting of: /dev/sdc1 /dev/sdd1 /dev/md4, consisting of: /dev/sde1 /dev/sdf1 As you can see, md0, md1 and md2 all use the same 2 drives (split into 3 partitions). I also have to note that this is done via ubuntu software raid, not hardware raid. Today, the /md0 RAID1 array shows as degraded - it is missing the /dev/sdb1 drive. But since /dev/sdb1 is only a partition (and /dev/sdb2 and /dev/sdb3 are working fine), it's obviously not the drive that's gone AWOL, it seems the partition itself is missing. How is that even possible? And what could we do to fix it? My output of cat /proc/mdstat: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sda2[0] sdb2[1] 24006528 blocks super 1.2 [2/2] [UU] md2 : active raid1 sda3[0] sdb3[1] 1441268544 blocks super 1.2 [2/2] [UU] md0 : active raid1 sda1[0] 1464710976 blocks super 1.2 [2/1] [U_] md3 : active raid1 sdd1[1] sdc1[0] 2930133824 blocks super 1.2 [2/2] [UU] md4 : active raid1 sdf2[1] sde2[0] 2929939264 blocks super 1.2 [2/2] [UU] unused devices: <none> FYI: I tried the following: mdadm /dev/md0 --add /dev/sdb1 But got this error: mdadm: add new device failed for /dev/sdb1 as 2: Invalid argument Output of mdadm --detail /dev/md0 is: /dev/md0: Version : 1.2 Creation Time : Sat Dec 29 17:09:45 2012 Raid Level : raid1 Array Size : 1464710976 (1396.86 GiB 1499.86 GB) Used Dev Size : 1464710976 (1396.86 GiB 1499.86 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 15:55:07 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : lia:0 (local to host lia) UUID : eb302d19:ff70c7bf:401d63af:ed042d59 Events : 26216 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 0 0 1 removed

  Read the article

• Handling emails on a web server - Making sure the FQDN is set correctly based on the website sending the email

  - by webnoob

  I have a Windows 2008 Web Edition server hosting multiple websites using IIS 7.5. At the moment, all the emails are sent via the IIS6 SMTP service. The FQDN of the SMTP service is set to the computer name at the moment which isn't correct as it doesn't resolve to a valid DNS entry and is not RFC compliant. Some questions: Is there any way I can change the FQDN of the SMTP service based on the site sending the email? Would it be Ok to just setup mailserver.mydomain.com and use that as the FQDN for all the sites on multiple domains. Should I be using some other mail server software to handle this better? The reason I am asking is lots of emails are hitting spam folders because the settings are incorrect. I have access to the code that is running the websites so if something needs to be done there then that shouldn't be a problem. The sites are written using ASP.NET 2.0. EDIT: I have just found an option to create an SMTP virtual service. Would this be the way forward? Create a virtual server for each site? Thanks.

  Read the article

• grub refuses to install to raid array

  - by ronno

  I have a software raid 0 setup with dual booting Windows 7 and Ubuntu 12.04. The GRUB bootloader that is already on the hard drive seems to work fine. However, since the latest package update for grub, it refuses to install the new version to the hard disk. grub-install throws the following error: /usr/sbin/grub-probe: error: cannot find a GRUB drive for /dev/mapper/< raid name_RAID0p9. Check your device.map. Auto-detection of a filesystem of /dev/mapper/< raid name_RAID0p9 failed. Try with --recheck. If the problem persists please report this together with the output of "/usr/sbin/grub-probe --device-map="/boot/grub/device.map" --target=fs -v /boot/grub" to < [email protected] update-grub pops the same "/usr/sbin/grub-probe: error: cannot find a GRUB drive for /dev/mapper/< raid name_RAID0p9. Check your device.map." every alternate line. I don't understand what exactly is going on. I'm afraid to reinstall the grub package because it might mess up the boot, which currently works fine. Is it safe to just ignore this?

  Read the article

• WAN Optimization for Small Office/Home Office

  - by TiernanO

  I have been reading up on WAN optimization for the last while, mostly out of interest of speeding up my own internet connections, but also to speed up the office internet connection. At home, I have 2 cable modems plugged into a RouterBoard RB750, which load balances the connections. In the office, we have a single connection into a NetGear router. Most of the WAN Optimization products I have seen, seem to be prohibitively expensive, but also seem to be based on the idea of having multiple branches around the world. What I am looking for, ideally, is as follows: software install: I am "guessing" I need to install it in 2 places: one in the office or house, and one in "the cloud". any connections going to, say, The US (we are in Europe, but our backup's live in the US currently, which would be something important to speed up) would be "tunnelled" though the Optimizer. If downloading or uploading large files, open multiple connections between both "the cloud" and the optimizer... This is where a lot of speed could be gained. finally, for items not compressed, they would be compressed on the cloud side of things, also items that are already on the optimizer could be not sent again. kind of like RSync or Proxy servers... So, is there something that can be done? Is it available using off the shelf components (some magic script with SSH, Squid, Linux and duct tape) or is it something that needs to be purchased? or even an Open Source Project that does 90% of what i am asking?

  Read the article

• What's the best way to clone multiple PCs from one machine?

  - by Jason T.

  Where I work we have dozens and dozens of old ThinkPad laptops. A lot of these can be reused but not for our needs. They have been long since replaced. The higher-ups have decided to donate them to charity. For better or for worse I have been tasked with reimaging them. I took a laptop and installed the factory copy of Windows, updated it, configured it appropriately. Now I'm trying to reimage it to dozens of other laptops. What's some good software to do this? First I used clonezilla to clone the hdd in the laptop to an internal drive in an external enclosure and it worked. Then I tried taking the base image out and connecting it externally to a laptop that needed to be imaged and I got it to work a few times. So far so good, right? Well once I informed my boss of my findings and what I would want to do then the images started to not work on new laptops. One of three things would happen: The Thinkpads would just blink at me and Windows wouldn't load. Or Windows would load but freeze within two minutes. Last but not least the laptops would BSOD during the Windows XP bootup. These laptops are not going to be used by the company. They're going to charity. So can anyone else recommend a way to reimage multiple laptops?

  Read the article

• How can I change the binding order of network adapters in Windows 7?

  - by Chris Farmer

  The end goal here is that I am trying to install an Oracle 10g server on my Windows 7 x64 dev box. I use DHCP, and the Oracle installer is throwing up this warning: Checking Network Configuration requirements ... Check complete. The overall result of this check is: Failed <<<< Problem: The install has detected that the primary IP address of the system is DHCP-assigned. Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP. I have installed the loopback adapter, but I am not sure how to make it the primary network adapter. I see this Microsoft KB article on the subject but it's Windows XP-oriented, and I can't seem to find a comparable one for Windows 7. Some of the options it talks about don't seem to be present in the views of the adapters that I see. So, how can I make the loopback adapter become the primary adapter?

  Read the article

• Looking for a small, portable, port-mirroring ethernet switch.

  - by user37244

  I recently had a mac go haywire, taking half a minute or more to get www.google.com loaded. Getting its owner to give up the machine for repair was like pulling teeth - they were insisting that it must be something to do with the network, since so much had changed with the local configuration at about the same time their box went haywire. I eventually set up a port mirror to a box that I could remote to so I could show that the mac was only irregularly getting packets onto the network. Demonstrating this faced an additional challenge: the latency of the remote desktop software I was using meant that I had to point to timestamps instead of just the moment the packet flashed up on the screen as my evidence. This particular user was the reason this was so challenging this time around, but I would like to have a box that I can cart from desk to desk to use wireshark on my laptop at any station where I need it. 3com, cisco, netgear, etc. (ad nauseum), all make switches that can be configured for port mirroring, but in my case, the smaller, the better. For the sake of my sanity, I'll probably end up running it off a battery anyway. If my laptop had two ethernet ports, this would be easy. So, whaddya recommand for a device that requires 0 configuration at each powerup (though I'm fine with poking at it for a while to set it up initially.) Small, light, and cheap enough to get it past purchasing? Thanks,

  Read the article

• SSD as primary or secondary drive on a small Linux server?

  - by Alex Martelli

  I'm pensioning off my 10-years-old home server and replacing it with an Ubuntu 10.04 box. The two storage devices are a Western Digital Caviar Green 2.0TB HD and an Intel X25-M 34nm Gen 2 80GB SATA II 2.5inch SSD (the box has 8GB RAM and an i5 750, if it matters). I don't care much about boot times (since I don't plan to reboot all that often;-); the main frequent, performance-demanding task will be (re)building large open source C or C++ software packages from sources (as an open source contributor, I do that often). So, I thought I'd keep the SSD as the secondary drive and the HD as the primary one, using the SSD mostly for the files that can otherwise demand a lot of seeking (esp. in a parallel make). However, the friendly vendor (perhaps more experienced in Windows systems than in Linux ones) thinks the "normal" way to configure the machine would be with the SSD as the primary drive. I'm pretty rusty on configuring and tuning systems, so, I thought I'd better double check on SuperUser... thanks in advance for advice about this choice!

  Read the article

• How to set an executable white list?

  - by izabera

  Under Linux, is it possible to set a white-list of executables for a certain group of users? I need them to be unable to use, for example, make, gcc and executables on removable disks. How can this be done? Edit, let me explain better. I'm dealing with a high school IT system, young geeks that (during the lessons) want to play, surf the net, damage those computer however they can. The major step to achieve this goal was to remove the system they're familiar with and install Ubuntu in all the computers. This actually works quite well, but recent events proved that this is not enough. I want to allow them to execute certain safe programs, like Open Office, and to deny any other program, whether it is preinstalled software, something they carry in usb drives, a downloaded program or a script they program on site. It's possible to remove the 'x' permission on any file on the pc, but of course it would be impractical. Furthermore, they would be able to run anything they download. I thought the best solution would be to make a white-list of safe programs and to deny anything else, but I don't really know how to do it. Any idea is helpful.

  Read the article

• Davical + LDAP + NTLM

  - by slavizh

  I have set up a Davical server on CentOS. I've configured it to use LDAP and the users use their usernames and passwords to authenticate to the Davical server. I am using Lightning as client software for calendaring. Using Lightning requires entering username and password everytime, so I decided to set NTLM. I want my users who are logging in the domain to use the calendar server trough Lightning without entering username and password. I've set up NTLM on the Davical server. But when a user trys to reach the calendar trough Lightning first the server asks for NTLM username and password and then ask for the LDAP username and password. It becomes something like double authentication. The problem is that NLTM requires domain\username and passowrd and Davical trough LDAP requires only username and password. So my questions are: Is there a way to change something in Davical so that Davical trough LDAP to requires domain\username and passwords authentication? That way may be trough NTLM the second authentication will proceed silently and the users will user Lightning without entering usernames and passwords Is there a way I can make this double authentication to become one and to use only NTLM? P.S. We have Samba domain with LDAP server and our users use Thunderbird for their mail and I want to put Lightning too. That way they will have calendar service. But I don't want they to enter username and password for the calendar every time they log in. I know they can save that password but that is not an option for my organization.

  Read the article

• Very Slow DSL (ethernet) speed [New Interesting Update]

  - by Abhijit

  Very IMPORTANT and INTERESTING UPDATE: Due to some reason I just thought to do a complete new setup and this time I decided to again have openSUSE plus ubuntu. So I first reinstall lubuntu and then I installed OpenSUSE 12.2 (64 bit). Now, my DSL speed is working very normal and fine on opensuse. So this is very scary. Is it possible for any operating system to manipulate my NIC so that it will work fine only on that operating system and not on another os? Regarding positive thinking and not being paranoid, what is it that makes ONLY suse to get my NIC to work at normal speed but ubuntu can not do it? Not even fedora? Not even linux mint? What all these OS are lacking that enables suse to work great? == ORIGINAL QUESTION == I 'was' on opensuse 12.2 when my dsl speed was normal. Yesterday I switched from opensuse to ubuntu 12.04 and speed decreased. It came to range of 7-10-13-20-25-kbps. Then I switch to linux mint, and then to fedora. Still slow speed. When I was in ubuntu I disabled ipv6 but still no luck. Now I am in fedora but this time with DIFFERENT ISP. And still I am getting very slow sped. So my guess is this is nothing to do with os. What can be wrong? Is this problem of NIC? Does NIC speed decreases over time? Does NIC life ends over time as with keyboard or mouse? Help please All the os I used are 64 bit and my laptop is Compaq Presario A965Tu Intel Centrino DUal Core. Interesting thing to notice is I get normal speed while downloading torrent inside torrent client softwares. This slow speed issue applied to download from any web browser or installing software using terminal.

  Read the article

• How can I get around windows 8.1 store (& metro apps) not working with UAC disabled

  - by Enigma

  I have UAC disabled because it is annoying and causes more problems that it could ever possibly solve, at least for me. Here is yet another problem, and it seems to be due to a recent update as I don't remember it in the past. Even with a MS account, I can't use the store because UAC is disabled. How can I get around this? Short term I can just enable it, reboot, use store, disable it, reboot and be on my way but there has to be a better way (other than MS getting their software completely right - like that will happen anytime, ever) Edit: Apparently this is far more of an issue than I originally thought. Now every(?)many metro apps requires UAC. Anyone aware of the update this got rolled in with? Thankfully netflix isn't affected which is the only metro app I use at the moment. What I see: Event Log info: Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: This app can't be activated when UAC is disabled. See the Microsoft-Windows-TWinUI/Operational log for additional information.

  Read the article

• Drowning in documents - recommend doc management solutions?

  - by Martin Day

  I've been researching document management lately. I want to organise my docs at home and also at the office. Finding affordable solutions one can actually test drive is quite hard. Some that I've downloaded just don't seem to work (testing on brand new Vista PC). I've seen some software on Amazon like Paperport but not really sure what they're like. For home I'd like something to organise files, full text search, good scanner integration, nice interface etc. But for the office it seems harder. I need something that does proper workflow and keeps versions. It will have an audit trail. Documents can be approved, checked in/out etc. I know a few clients who would like something similar. It would be great just to import thousands of documents from a shared drive and get them indexed with dupes killed. I'd like to be super clear about how/where the documents are being stored so that maintenance and backups are clear. My Google/twitter searches lead back to the same tired and vague webpages pushing what look like expensive and custom made solutions. Some might be very good I suppose but it's darn hard to tell. I don't mind a hosted package but all in all I don't think something like Google Docs, as good as it is now, will work. There are too many quirks and missing features (as compared to Office). Being able to work directly with the common Office file formats is important. I've noted a similar sounding question asked here back in August but it didn't seem to turn up too many solutions that I could easily and quickly apply. Also there could have been some changes since then so I feel it's worth asking.

  Read the article

• How can I avoid my web browser from redirecting to localhost using WAMP in Windows7?

  - by Josh

  I'm currently using Windows 7 with WAMP to try and work on some software, but my web browsers will not accept cookies from the "localhost" domain. I tried creating a few bogus domains in my hosts file by pointing them to 127.0.0.1 but when I type them in I am automatically redirected back to localhost. I have also configured virtualhosts in apache to correspond with the domains I added to the hosts file and it still redirects back to localhost. Is there anything special I must do on Windows 7 to get around this localhost redirect? Thanks for looking :) I'll include my host file here: # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost 127.0.0.1 magento.localhost.com www.localhost.com Thanks for looking :)

  Read the article

< Previous Page | 697 698 699 700 701 702 703 704 705 706 707 708  | Next Page >