Search Results

Search found 21091 results on 844 pages for 'dsl client'.

Page 703/844 | < Previous Page | 699 700 701 702 703 704 705 706 707 708 709 710  | Next Page >

  • Returning a 404 page when a folder is accessed from one domain, but allowing access from other domains and IP addresses

    - by okw
    Situation: I want to return a 404 page ("404.php") when a folder ("hidden") is accessed from the example.com domain. I want the same folder to be accessible from a subdomain ("hidden.example.com") or from a different domain ("hidden.com") which are both configured in a single VirtualHost entry. The server has multiple IP addresses that it listens on. Each IP address serves identical content from the example.com domain (sharing a VirtualHost entry.) I want the folder to be accessible from the IP address. The server is configured to use SSL/TLS/HTTPS. HTTPS is optional on example.com, but HTTPS is enforced in the .htaccess file for the hidden folder using a rewrite rule shown below. /www/hidden/.htaccess RewriteCond %{HTTPS} !=on RewriteRule .* https://%{SERVER_NAME}%{REQUEST_URI} [R,L] I know that {SERVER_ADDR} gives the server's IP address, but does it return the one that the client is requesting from? I'm also starting to think that something in the VirtualHosts file would be more appropriate. Any thoughts on this? What should be allowed: http://87.65.43.21/hidden/ https://87.65.43.21/hidden/ http://12.34.56.78/hidden/ https://12.34.56.78/hidden/ http://hidden.example.com/ https://hidden.example.com/ http://hidden.com/ https://hidden.com/ http://www.hidden.com/ https://www.hidden.com/ What should be 404-ed with 404.php http://example.com/hidden/ https://example.com/hidden/ http://www.example.com/hidden/ https://www.example.com/hidden/ http://example.com/hidden/hiddenfile.php https://example.com/hidden/hiddenfile.php etc. Thanks.

    Read the article

  • LAMP server VM issues

    - by nullArray
    After getting a recommendation to salvage a wiki by installing a LAMP server, I went on the prowl for a good virtualized one. I used the VMware Player version. Since the windows box has Bonjour, I can, for example, go to http://lamp.local. and it works see the web client. The problem is, I can't ssh to a directory to scp the files I need, mount a usb thumbdrive (usbfs is unsupported) nor get samba working. I can't even update the ubuntu installation, it fails. I've tried bridged, nat and host-only networking settings in VMware Player. Bridged gives me an undefined IP, while the other two each have different IPs. All three settings allow me to access the web config, but none of them give me samba access. Windows usually freezes, then reports that it cannot connect. I'd rather not wipe a box to do a dedicated install, is there I way I can get this VM working, or are there better LAMP VMs out there? This one came already working and set up with VMware Player, so I thought it would be perfect... Thanks,

    Read the article

  • Apache2 VirtualHost on Debian not working

    - by milo5b
    I am having some problems with Apache2 configuration. I have already tried to look for documentation on the web (Apache's site, Debian's site, here on serverfault, etc), but nothing really helps. I have tried different configurations, but my current configuration is the following (/etc/apache2/sites-available/default): <VirtualHost *:80> ServerAdmin [email protected] ServerName mysite.dev ServerAlias mysite.dev DocumentRoot /var/www/mysite.dev/httpdocs/ ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName livesite.com ServerAlias www.livesite.com DocumentRoot /var/www/livesite.com/httpdocs/ <Directory /var/www/livesite.com/httpdocs/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> mysite.dev it's just an entry in hosts file on my client machine, while livesite.com it's an actual DNS record which would resolve to the same IP as the IP set in hosts file for mysite.dev. The problem is that when i try to type mysite.dev in my browser, it would automatically go to livesite.com. I tried to have different /etc/apache2/sites-enabled/ files (/etc/apache2/sites-enabled/mysite.dev , /etc/apache2/sites-enabled/livesite.com ) - and of course with the actual sites-available related files, but achieving the same results. I have tried to have a peak on error.log and access.log but there's nothing I can see. My httpd.conf contains: AccessFileName .htaccess And I have no /etc/apache2/conf.d/virtual.conf file. Any help would be greatly appreciated - if I did not provide enough info please let me know I will do my best to provide all necessary info. Thanks

    Read the article

  • Physical-to-virtual for personal use

    - by Journeyman Geek
    One of my current projects involves reducing the number of old computers lying around. So far, the office systems have been downsized from 5 to 2. One system which had no data on it was dumped entirely, while three other identical boxes were consolidated into to one (I swap hard drives as needed and they just work(tm)). I want to make further cuts. The physical systems in question all run windows xp sp3, and were old Pentium 4s with 256 MB of RAM. Currently, I have got a VirtualBox running on another system. My intention is to migrate all services to that. We can assume that disk space and RAM on the host is not an issue. I'd rather not go with a client-server physical-to-virtual (P2V) method like what VirtualBox uses now. I have a few specific concerns as well - specifically whether I'd need to reactivate or sysprep for dissimilar hardware first. An offline tool for imaging (Windows or Linux) would not be an issue since the drives could be mounted onto another system I have anyway or I could use a LiveCD. What would be my options for P2V conversion, and what would I need to keep in mind when doing this?

    Read the article

  • Performance Test and TCP tuning

    - by Mithir
    We are in the process of performance testing an application which receives tcp requests converts them to soap requests (WCF-httpBinding) which other services work on. The server is Windows Server 2008 R2. The TCP requests are received by TcpListener instance (.NET C#). There are 3 http-binded WCF services running on the same server. We have built a performance test client which goal is to simulate multiple concurrent requests(each request has to be different and recognizable by the application). We built a test running 150 requests that run on the same time (by 150 different threads), and we noticed straight away that some requests get the TCP connection slowly, but once they get it, they act fast. A single request writes twice on the same connection- request and an application ack. Although a single request+ack can take about 150ms, the 150 test takes about 7 seconds. The Problem When we try to run this test from 2 different computers we lose requests. some clients requests are getting no connection was made because the target machine actively refused it So I got here and got convinced it was because of the backlog. I changed the TcpListener parameters and did the registry AFD backlog changes written here but it still didn't work, so I inserted all of the TCP tuning suggested plus some netsh commands which were recommended, but still no change, we still get that error. Is there anything else I need to know? Are there any other solutions?

    Read the article

  • Virtual (ESXi4) Win 2k8 R2 server hangs when adding role(s)

    - by Holocryptic
    I'm trying to provision a 2k8r2 Enterprise server in ESXi4. The OS installation goes fine, VMware tools, adding to domain, updates. All the basic stuff before you start adding Roles and Features. I've had this happen on two attempts already, and I'm not sure where the problem might be. I don't think it's hardware, because I have another 2k8r2 Standard server that's running fine. The only real difference is the install media. The server that's working was installed using a trial ISO and license. The one I'm having problems with is a full MAK installation. When I go to add a Role (the last case was Application Server) it gets all the way to "collecting installation results" before it hangs. CPU utilization in the vSphere client shows little spikes of activity with flatlines inbetween, but the whole console is locked up. The only way to release it is to power off and bring it back up. When you go to look at the added roles after bringing it back up, it shows that it is installed, but I don't trust that something didn't get wedged in all of that. The first install I did was with Thin Disk provisioning. The second attempt was with regular disk provisioning. In both cases 4GB of RAM, 2 vCPUs. VMware host is a HP Proliant DL380 G6, RAID-1 OS, RAID-5 data volume. 12 GB RAM. Has anyone else had this problem, or know where I should start poking around?

    Read the article

  • VPN being blocked somewhere between either my BT2700HGV and DLink DFL-210

    - by Dom
    Hi, For some time I have been unable to get VPN working through my set up. I have a BT2700HGV Router (2 Wire Model) and as a firewall I have the Dlink DFL-210. You can't turn the firewall completely off on the BT2700HGV so I have it set to DMZplus mode for the Firewall. In theory this should then allow the VPN ports through. On the Firewall I have a series of rules set up and one is the pptp-allow rule which should allow access on the correct ports also. When I try to connect via VPN however the client machine gets an error 809. If I check the log on the Dlink firewall, I see this record: http://dl.dropbox.com/u/1041315/packetdrop.PNG The laptop I am testing the vpn with is connected directly to the BT2700HGV router and I am trying to VPN from it onto 81.138.86.217. I can't work out whether I have some sort of problem in the set up of the rules on my firewall or if the BT router (even though it's in DMZplus mode) is still blocking port 1723. I read somewhere that there where problems because BTs Openzone held onto this port for some reason. Any help would be greatly appreciated. If you need further screen shots or information then please let me know. I wasn't able to create new tags for the router and firewall name or insert the picture in as I am new to the forum. Dom :-)

    Read the article

  • Cisco Pix 515 ip addressing

    - by Rickard
    I have just gotten my hands on a Cisco Pix 515 (not 515E) with 3 interfaces, and are just about to start some labs. In my lab, I am using a real life scenario from an actual setup at work. As I have no access to the device at work, I am simply trying to replicate the scenario by trial and error. At work, we are given two IP addresses from the provider, which is 1-to-1 nated addresses. The addresses we are allowed to use are: 10.131.35.4-5/29 Now, we have 3 servers on a DMZ, 192.168.2.2-4/24 and 17 client computers on 192.168.1.100-117/24 aswell as some static addressed devices on 192.168.1.8-18/27 My question is, how would I best set up so that the machines on the DMZ get's translated to 10.131.35.4 and the machines on 192.168.1.* will be translated to 10.131.35.5 I don't expect or want anyone to give me a fully functional config, I may learn from it, but I'd prefer to just have some advices or maybe a guide on how to set it up. I hope someone can shed some light over my situation, have been looking through google but I guess I don't the searchwords I'm using isn't too good as I can't find any good clues. THank you very much! PS. Maybe I should add, I am not unfamiliar with the Cisco CLI, as I prefer using that before any gui's. So not really looking for any solutions for the ASDM. DS.

    Read the article

  • Can't make Dovecot communicate with Postfix using SASL (warning: SASL: Connect to private/auth failed: No such file or directory)

    - by Fred Rocha
    Solved. I will leave this as a reference to other people, as I have seen this error reported often enough on line. I had to change the path smtpd_sasl_path = private/auth in my /etc/postfix/main.cf to relative, instead of absolute. This is because in Debian Postfix runs chrooted (and how does this affect the path structure?! Anyone?) -- I am trying to get Dovecot to communicate with Postfix for SMTP support via SASL. the master plan is to be able to host multiple e-mail accounts on my (Debian Lenny 64 bits) server, using virtual users. Whenever I test my current configuration, by running telnet server-IP smtp I get the following error on mail.log warning: SASL: Connect to /var/spool/postfix/private/auth failed: No such file or directory Now, Dovecot is supposed to create the auth socket file, yet it doesn't. I have given the right privileges to the directory private, and even tried creating a auth file manually. The output of postconf -a is cyrus dovecot Am I correct in assuming from this that the package was compiled with SASL support? My dovecot.conf also holds client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } I have tried every solution out there, and am pretty much desperate after a full day of struggling with the issue. Can anybody help me, pretty please?

    Read the article

  • Linux Scheduler (not using all cores on multi-core machine) RHEL6

    - by User512
    I'm seeing strange behavior on one of my servers (running RHEL 6). There seems to be something wrong with the scheduler. Here's the test program I'm using: #include <stdio.h> #include <unistd.h> #include <stdlib.h> void RunClient(int i) { printf("Starting client %d\n", i); while (true) { } } int main(int argc, char** argv) { for (int i = 0; i < 4; ++i) { pid_t p_id = fork(); if (p_id == -1) { perror("fork"); } else if (p_id == 0) { RunClient(i); exit(0); } } return 0; } This machine has a lot more than 4 cores so we'd expect all processes to be running at 100%. When I check on top, the cpu usage varies. Sometimes it's split (100%, 33%, 33%, 33%), other times it's split (100%, 100%, 50%, 50%). When I try this test on another server of ours (running RHEL 5), there are no issues (it's 100%, 100%, 100%, 100%) as expected. What's causing this and how can I fix it? Thanks

    Read the article

  • OpenSSL: how to setup an OCSP server for checking third-party certificates?

    - by StackedCrooked
    I am testing the Certificate Revocation functionality of a CMTS device. This requires me to setup a OCSP responder. Since it will only be used for testing I assume that the minimal implementation provided by OpenSSL should suffice. I have extracted the a certificate from a cable modem, copied it to my PC and converted it to the PEM format. Now I want to register it in the OpenSSL OCSP database and start a server. I have completed all these steps, but when I do a client request my server invariably responds with "unknown". It seems to be completely unaware of my certificate's existence. I would greatly appreciate if anyone would be willing to have a look at my code. For your convenience, I have created a single script consisting of a sequential list of all used commands, from setting up the CA until starting the server: http://code.google.com/p/stacked-crooked/source/browse/trunk/Misc/OpenSSL/AllCommands.sh You can also find the custom config file and the certificate that I am testing with: http://code.google.com/p/stacked-crooked/source/browse/trunk/Misc/OpenSSL/ Any help would be greatly appreciated.

    Read the article

  • OpenSSL: how to setup an OCSP server for checking third-party certificates?

    - by StackedCrooked
    I am testing the Certificate Revocation functionality of a CMTS device. This requires me to setup a OCSP responder. Since it will only be used for testing I assume that the minimal implementation provided by OpenSSL should suffice. I have extracted the a certificate from a cable modem, copied it to my PC and converted it to the PEM format. Now I want to register it in the OpenSSL OCSP database and start a server. I have completed all these steps, but when I do a client request my server invariably responds with "unknown". It seems to be completely unaware of my certificate's existence. I would greatly appreciate if anyone would be willing to have a look at my code. For your convenience, I have created a single script consisting of a sequential list of all used commands, from setting up the CA until starting the server: http://code.google.com/p/stacked-crooked/source/browse/trunk/Misc/OpenSSL/AllCommands.sh You can also find the custom config file and the certificate that I am testing with: http://code.google.com/p/stacked-crooked/source/browse/trunk/Misc/OpenSSL/ Any help would be greatly appreciated.

    Read the article

  • Setup Entourage for Exchange via HTTP communication

    - by Johandk
    Our ISP set up a hosted exchange server for all our mail. I've setup all our Outlook users with no problems. We have two people using Mac OSX Leopard and Entourage. Entourage has the option of adding an Exchange account, but I have no idea how to tell it to connect to exchange via HTTP. Heres an excerpt from the client setup docs the hosting company sent me for Outlook: 1 .Go to control panel 2. Select ‘Mail’ 3. Select ‘Email accounts’ Under the E-mail tab select ‘New’ Select ‘Manually configure server settings......’ - click next Select ‘Microsoft Exchange’ – click next Complete details as below with Microsoft Exchange Server as: [server address] Do not select ‘Check Name’. Instead select ‘More Settings’. Go to the Connection tab, and select the bottom option ‘Connect to Microsoft Exchange using HTTP’. And then select the ‘Exchange Proxy Settings’ button. Enter Proxy server for Exchange Check Only connect to proxy servers that have this principal name in their certificate, Enter msstd:[servername] Proxy Authentication - select Basic Authentication Select OK, and again, so that you return to the main screen. Now select ‘Check Name’. Enter Username and Password: The username should now be the full name and underlined. If so select next, and then finish. Next time you open Outlook, enter username and password Any help GREATLY appreciated.

    Read the article

  • Subversion Edge LDAP (require CAC Certificate not Username and Password)

    - by Frank Hale
    What I've Done: I've successfully installed and configured Subversion Edge 3.1.2 with LDAP support on a Windows 2008 server. I have configured LDAP users and am able to use LDAP credentials to work on repositories just fine. No issues whatsoever. Works great! What I Want To Do: I've been searching for several hours now in hopes to find some information on how to configure Subversion Edge server to require client certificates for user authentication against an LDAP environment. I have not found anything yet that gives me an indication of how to do it. I know there are SVN clients that are capable of prompting for CAC certificates but I cannot figure out how to set my server up to require it. NOTE: CAC authentication is already setup and working in the windows environment. Desired Outcome: When running svn commands that require authentication against my Subversion Edge Server I want it to prompt me for my CAC certificate instead of my Active Directory username and password. If anyone has any information on this I'd greatly appreciate it. EDIT: I'm still digging so if I find out anything I'll update this question with what I found.

    Read the article

  • Finding cause of TCP retransmission within a LAN

    - by Surreal
    Hello denizens of Server Fault I have an irritating problem with a LAN of about 100 computers, 2 Windows domain servers, and 12 VoIP phones. Since their installation around a year ago, every week or so, we notice a VoIP phone resetting itself - occasionally in the middle of a call. Simultaneously there are often signs of temporary loss of connection on computers: freezes in explorer while accessing network shares, errors in our administration software due to loss of connection to the database server. I have been doing some Wireshark monitoring on the connection between the VoIP PBX and the rest of the network. Wireshark picks up a clump of retransmitted TCP packets at the times when we record phone restarts. The Wireshark log shows about 2 clusters of retransmissions a day ranging from 5 packets to hundreds. Those in each cluster are mainly between the PBX and some set of the VoIP phones, but not always the same set. Often retransmissions at the same time are to phones connected to the same switch, but sometimes retransmissions occur together to phones at opposite ends of the network. There are usually some coincident retransmissions in passing TCP traffic, for example between client machines and the file servers. The spikes in retransmissions and phone resets do not correlate well with when the network is heavily loaded. They seem to occur slightly more during the day, but most in the evening, when traffic should be decreasing. They occur reasonably often late at night when most computers are turned off and traffic should be lowest. Do you have any ideas that might help diagnose the cause of problems like this? One thing I have not yet tried, but should have, is updating the firmware of all the switches.

    Read the article

  • SharePoint Business Connectivity Services (BCS) Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

    - by g18c
    I am running SharePoint 2010 with SQL 2012, I am trying to get Business Connectivity Services (BCS) running but I am facing a double-hope authentication issue. Everytime I try to connect to the external BCS list created in SharePoint designer, I get the error Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. In the event viewer on the SQL server I see a login failure for an anonymous user from the SP server IP address. Background information below: I have enabled Kerberos under SharePoint Central admin. I have the following AD domain accounts: SP_Farm - main website pool SP_Services - for SharePoint services (including BCS) SQL_Engine - SQL database engine I then created the following with SetSPN: SetSPN -S http/intranet mydomain\SP_Farm SetSPN -S http/intranet.mydomain.local mydomain\SP_Farm SetSPN -S SPSvc/SPS mydomain\SP_Farm SetSPN -S MSSQLSvc/SQL1 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1:1433 mydomain\SQL_DatabaseEngine SetSPN -S MSSQLSvc/SQL1.mydomain.local:1433 mydomain\SQL_DatabaseEngine I then delegated the AD accounts for any authentication protocol to the following: SP_Farm - SP_Farm (http service type, intranet) SP_Farm - SQL_DatabaseEngine (MSSQLSvc, sql1) SP_Service - SP_Service (SPSvc) SP_Service - SQL_DatabaseEngine (MSSQLSvc, sql1) I have also checked the WFE is being logged on to with Kerberos, with the WFE server event log showing event ID 4624 with Kerberos authentication, this is OK. The SQL is also showing connections authenticated as Kerberos from the WFE with the following query: Select s.session_id, s.login_name, s.host_name, c.auth_scheme from sys.dm_exec_connections c inner join sys.dm_exec_sessions s on c.session_id = s.session_id Despite the above, credentials are not passed from the client through the SharePoint server to the SQL server, only the anonymous account is used. I get the following error in the WFE server for 'BusinessData' ID 8080: Could not open connection using 'data source=sql1.mydomain.local;initial catalog=MSCRM;integrated security=SSPI;pooling=true;persist security info=false' in App Domain '/LM/W3SVC/1848937658/ROOT-1-129922939694071446'. The full exception text is: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. If I set a username and password with the Secure Store Service and set the external list to use the impersonated credentials, the list works. Any ideas what I have missed and what can be tried next?

    Read the article

  • Domain joined computer unable to access servers through VPN

    - by kscott
    Our servers are in a virtual off site hosting center, our office has a vpn connection to the data center, but for reasons I don't understand we also have to connect to the Citrix Access Gateway (CAG) client in order to access the servers. I am a programmer with rather limited ops knowledge including a weak grasp of networking and terminology. Bear with me. I was just given a new laptop, which is a 64 bit Windows 7 system unlike my previous 32 bit Windows XP desktop which was able to connect without issue. My laptop has been joined to the domain so that I login with my AD credentials, I am able to connect to the CAG and get authenticated, and after doing this I can ping our servers and they resolve to the correct internal IP addresses, but I am unable to use remote desktop to the servers, connect to SQL servers through my local SQL Management Studio, navigate to them through the file system, or view any of our internal intranet websites. All of which I was able to do previously. I have tried turning off my Windows firewall and the problem remains, the DNS servers are set to the correct IPs of our domain controllers, and the ops guys here are a little stumped. Does any one have any suggestions?

    Read the article

  • FreeBSD slow transfers - RFC 1323 scaling issue?

    - by Trey
    I think I may be having an issue with window scaling (RFC 1323) and am hoping that someone can enlighten me on what's going on. Server: FreeBSD 9, apache22, serving a static 100MB zip file. 192.168.18.30 Client: Mac OS X 10.6, Firefox 192.168.17.47 Network: Only a switch between them - the subnet is 192.168.16/22 (In this test, I also have dummynet filtering simulating an 80ms ping time on all IP traffic. I've seen nearly identical traces with a "real" setup, with real internet traffic/latency also) Questions: Does this look normal? Is packet #2 specifying a window size of 65535 and a scale of 512? Is packet #5 then shrinking the window size so it can use the 512 scale and still keep the overall calculated window size near 64K? Why is the window scale so high? Here are the first 6 packets from wireshark. For packets 5 and 6 I've included the details showing the window size and scaling factor being used for the data transfer. Code: No. Time Source Destination Protocol Length Info 108 6.699922 192.168.17.47 192.168.18.30 TCP 78 49190 http [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=8 TSval=945617489 TSecr=0 SACK_PERM=1 115 6.781971 192.168.18.30 192.168.17.47 TCP 74 http 49190 [SYN, ACK] Seq=0 Ack=1 Win=65535 Len=0 MSS=1460 WS=512 SACK_PERM=1 TSval=2617517338 TSecr=945617489 116 6.782218 192.168.17.47 192.168.18.30 TCP 66 49190 http [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSval=945617490 TSecr=2617517338 117 6.782220 192.168.17.47 192.168.18.30 HTTP 490 GET /utils/speedtest/large.file.zip HTTP/1.1 118 6.867070 192.168.18.30 192.168.17.47 TCP 375 [TCP segment of a reassembled PDU] Details: Transmission Control Protocol, Src Port: http (80), Dst Port: 49190 (49190), Seq: 1, Ack: 425, Len: 309 Source port: http (80) Destination port: 49190 (49190) [Stream index: 4] Sequence number: 1 (relative sequence number) [Next sequence number: 310 (relative sequence number)] Acknowledgement number: 425 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) Window size value: 130 [Calculated window size: 66560] [Window size scaling factor: 512] Checksum: 0xd182 [validation disabled] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2617517423, TSecr 945617490 [SEQ/ACK analysis] TCP segment data (309 bytes) Note: originally posted http://forums.freebsd.org/showthread.php?t=32552

    Read the article

  • Forward Apache to Django dev server

    - by Alex Jillard
    I'm trying to get apache to forward all requests on port 80 to 127.0.0.1:8000, which is where the django dev server runs. I think I have it forwarding properly, but there must be an issue with 127.0.0.1:8000 not being run by apache? I'm running the django dev server in an ubuntu vmware instance, and I'd other people in the office to see the apps in development without having to promote anything to our actual dev/staging servers. Right now the virtual machine picks up an IP for itself, and when I point a browser to that url with the defualt apache config, I get the default apache page. I've since changed the httpd.conf file to the following to try and get it to forward the requests to the django dev server: ServerName localhost <Proxy *> Order deny,allow Allow from all </Proxy> <VirtualHost *> ServerName localhost ServerAdmin [email protected] ProxyRequests off ProxyPass * http://127.0.0.1:8000 </VirtualHost> All I get are 404s with this, and in error.log I get the following (192.168.1.101 is the IP of my computer 192.168.1.142 is the IP of the virtual machine): [Mon Mar 08 08:42:30 2010] [error] [client 192.168.1.101] File does not exist: /htdocs

    Read the article

  • Apache ProxyPass with SSL

    - by BBonifield
    I have a QA setup that consists of multiple internal development servers and one world-accessible provisioning machine that is setup to proxy pass the web traffic. Everything works fine for non-SSL requests, but I'm having a hard time getting the SSL logic working as well. Here's a few example vhost blocks. <VirtualHost 192.168.168.101:443> ProxyPreserveHost On SSLProxyEngine On ProxyPass / https://192.168.168.111/ ServerName dev1.site.com </VirtualHost> <VirtualHost 192.168.168.101:80> ProxyPreserveHost On ProxyPass / http://192.168.168.111/ ServerName dev1.site.com </VirtualHost> <VirtualHost 192.168.168.101:443> ProxyPreserveHost On SSLProxyEngine On ProxyPass / https://192.168.168.111/ ServerName dev2.site.com </VirtualHost> <VirtualHost 192.168.168.101:80> ProxyPreserveHost On ProxyPass / http://192.168.168.111/ ServerName dev2.site.com </VirtualHost> I end up seeing the following error in the provisioner's error log. [Fri Jan 28 12:50:59 2011] [warn] [client 1.2.3.4] proxy: no HTTP 0.9 request (with no host line) on incoming request and preserve host set forcing hostname to be dev1.site.com for uri / As well as the following entry in the destination QA machine's access log. 192.168.168.101 - - [22/Feb/2011:08:34:56 -0600] "\x16\x03\x01 / HTTP/1.1" 301 326 "-" "-"

    Read the article

  • MS DNS lookup issue

    - by 3molo
    Hi, Got two AD/DNS servers, and on the secondary I can't seem to lookup the external site www.iis.se (or any other hostname that their name servers control). The central firewall at this office allows any any outbound, tcp and udp. The DNS server has no local firewall nor antivirus. My windows client, located in the same subnet as the DNS server can do the lookup by asking the nameservers that are in control of www.iis.se. 'dig NS iis.se' shows iis.se. 2517 IN NS ns2.nic.se. iis.se. 2517 IN NS ns.nic.se. iis.se. 2517 IN NS ns3.nic.se. on AD/DNS server C:\Users\Administratornslookup www.iis.se 212.247.7.228 Server: UnKnown Address: 212.247.7.228 Name: www.iis.se Addresses: 2a00:801:f0:80::80 212.247.7.221 C:\Users\Administratornslookup www.iis.se 194.17.45.54 Server: UnKnown Address: 194.17.45.54 Name: www.iis.se Addresses: 2a00:801:f0:80::80 212.247.7.221 C:\Users\Administratornslookup www.iis.se 212.247.3.83 Server: UnKnown Address: 212.247.3.83 Name: www.iis.se Addresses: 2a00:801:f0:80::80 212.247.7.221 And still: C:\Users\administratornslookup www.iis.se Server: UnKnown Address: 127.0.0.1 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. * Request to UnKnown timed-out

    Read the article

  • How to use DNS/Hostnames or Other ways to resolve to a specific IP:Port

    - by tomaszs
    This is a Canonical Question about DNS/Hostnames resolution to IPs/Ports Example 1 I'm running a web server on port 80 and another on port 87. I would like to use DNS so that www.example.com goes to port 87. How can I accomplish this using DNS only? Example 2 I'm running a service on my server on a non-standard port. How can I get clients to connect to this non-standard port automatically? Can I use DNS? Is there some application specific support where DNS could indicate the IP and Port? Example 3 Do some application protocols specifically support hostname awareness, and allow special actions to be taken based on this information? Are there other questions on Server Fault that cover some of these? Commandeering: This question was originally asking about running IIS and Apache on the same server, but the same concepts can be applied to any server software receiving connections from clients. The Answers below describe the technical problems and solutions of using DNS and application protocol support to assign a port number for a client to connect.

    Read the article

  • How to re-join an AD2003 domain with Samba after deleting the machine account?

    - by Guss
    During some troubleshooting I deleted the machine account for a Linux server running samba from our AD 2003 domain. We are using Kerberos for authentication, and after I deleted the machine account I tried to join the domain again using net ads join -U Administrator But I keep getting Kerberos errors like these: [2009/08/18 16:14:36, 0] libads/kerberos.c:ads_kinit_password(228) kerberos_kinit_password [email protected] failed: Client not found in Kerberos database Failed to join domain: Improperly formed account name It appears as if samba remembers that it once had an account with the AD and keeps trying to reconnect to it, but I want to create a new account from scratch. I tried to delete all the .tdb files I could find as well as everything under /var/cache/samba but to no avail - it still behaves the same. I also tried to create the machine account on the AD side, but then I get a similar error when I try to join, about failure to authenticate with the machine account - it looks like samba tries the previous machine account password and I don't know how to reset it, or even if I could figure out what samba uses - how to set it in the AD. Any help would be greatly appreciated, as at this point the only thing I can think about is to reformat and reinstall the machine, and I would really REALLY love to not do that. Thanks in advance.

    Read the article

  • MySQL Workbench is not finding MySQL service? [closed]

    - by PhADDinTraining
    I set up a local MySQL server, currently with no databases. I'm trying to create a new server instance profile in MySQL Workbench to manage the server, and during the Create New Server Instance Profile wizard, it gets to the Windows Management section and tells me that No MySQL service found. I went into Task Manager and found the process mysqld.exe to be running, under the user name of NETWORK SERVICE. Then I went into the Services tab and found that MySQLServerName (I custom named the Windows service) is also there, and status is running. I ran cports and looked at what ports mysqld.exe is using, and ran a telnet command on that port. It's reporting that the port is being listened in on. I then ran the MySQL Command Line Client to be sure, and after \r it gives me a proper connection ID and a list of databases (NONE at this point). But with all this, I can't make the wizard find a running service. I've Googled this and found no answers, so please, if someone would help shed some light on this issue that'd be great!

    Read the article

  • Postfix relay gives error 450 while it should be 550

    - by dieter-be
    Hi, we use postfix to do relaying. We get several messages like the following in /var/log/mail (slightly edited) Apr 13 13:30:29 linserver postfix/smtpd[1064]: NOQUEUE: reject: RCPT from unknown[$ip]: 450 4.1.1 <[email protected]>: Recipient address rejected: undeliverable address: host domain.be [$ip] said: 550 <[email protected]>: Recipient address rejected: User unknown in virtual mailbox table (in reply to RCPT TO command); from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<BLUESTREAK.domain.local> Now, when the master mail servers gives a 550, claiming that the user does not exist, I want the relay to also give a 550 back. What happens now is that it seems to return a 450, causing clients to keep messages queued, keep trying and only notify users after a certain period has passed. According to what I could find, the soft_bounce could cause this. But we have not enabled this option (and by default it's off according to postfix docs) It might also have something to do with the *_reject_code postconf values. Especially since the log message complains the unknown ip. But as you can see in the postconf output below, smtpd_sender_restrictions and smtpd_client_restrictions are empty. So even if it would try to do any restrictions there, 550 is the "worst" error going on, so that's what I expect to be returned to the client. postconf: http://sprunge.us/JYgB Thanks, Dieter

    Read the article

< Previous Page | 699 700 701 702 703 704 705 706 707 708 709 710  | Next Page >