Search Results

Search found 30127 results on 1206 pages for 'home network'.

Page 703/1206 | < Previous Page | 699 700 701 702 703 704 705 706 707 708 709 710  | Next Page >

• ASUS VX-6 Laptop Wireless not connecting

  - by user2152790

  Someone posted a script a couple days ago, here is my output.Pastebin I can see wifi SSIDs in network, but cannot connect to mine. The only time wifi worked on 13.10 was in the Live CD, but wifi stopped working as soon as install process started. Did below but made no difference. sudo apt-get install bcmwl-kernel-source sudo modprobe -rv brcmsmac sudo modprobe -v wl What I do next? I tried Software&Updates and it showed 1 proprietary driver in use. This sounds like a WPA/WPA2 issue? Wifi works when I tried Zorin OS 7.1, wifi always worked in windows 7.

  Read the article

• CPU heating up too much and locking the notebook [12.10 32bits]

  - by Lucas Coutinho

  I have an AMD A6-3400m. When installing ubuntu 12.10 the CPU gets too hot. When I go to see the cpu usage not see anything unusual. I think she is working at or above the specifications of the cpu. I can not finish the installation because the notebook warms both the system disarms and the cooler is maximum. Do not know if it's just me but I never had a good experience using Linux on AMD. When I used Intel these problems did not happen. What is happening can? Ps: The laptop works perfectly in Windows 7 Home Premium 64. No crashes, no overheat, simply works.

  Read the article

• Cannot get laptop wifi to work in ubuntu 12.4

  - by Coda

  Hi i have a Toshiba Satellite L645D-S4106 laptop and i recently installed ubuntu 12.4 on it and i cannot get the wifi to connect for the life of me. When i tried ubuntu out before installing it, the wifi worked while windows was still installed on it. Then i installed ubuntu and now there is no wifi. I can't even flip the wifi network switch to the on position. I installed the driver from realtek for the linux driver and still nothing. Doing rfkill list all shows soft blocked: no and hard blocked: yes. Can anyone help me :p haha very frusterating. It probably is something very dumb. Thanks

  Read the article

• SQLAuthority News Author Visit SQL Server 2008 R2Launch

  June 11, 2010 was a wonderful day because I attended the very first SQL Server 2008 R2 Launch event held by Microsoft at Mumbai. I traveled to Mumbai from my home town, Ahmedabad. The event was located at one of the best hotels in Mumbai,”The Leela”. SQL Server R2 Launch was an evening event that [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Juniper setup on 12.04

  - by Lauran

  I have a laptop with Windows XP and Ubuntu 12.04 (32 bits). Until now, I used Windows XP to connect to a Juniper VPN but now I'd like to try it with Linux. I read the mad scientist walkthrough (including the sun java part) but I can't run the setup. I get the popup that ask me if I'm sure I want to run the applet but then, nothing. mad-scientist says it's probably a C runtime lib problem and suggests to use his script with -nojava but he doesn't say how to install Network Connect in the first place. Any idea? Thanks for any suggestion! Laurian PS: I have: Ubuntu 12.04 32bits Java from Sun 1.6.0.32 Firefox 12 xterm (I think it was suggested somehwere)

  Read the article

• Data structure for file search

  - by poly

  I've asked this question before and I got a few answers/idea, but I'm not sure how to implement them. I'm building a telecom messaging solution. Currently, I'm using a database to save my transaction/messages for the network stack I've built, and as you know it's slower than using a data structure (hash, linkedlist, etc...). My problem is that the data can be really huge, and it won't fit in the memory. I was thinking of saving the records in a file and the a key and line number in a hash, then if I want to access some record then I can get the line number from the hash, and get it from the file. I don't know how efficient is this; I think the database is doing a way better job than this on my behalf. Please share whatever you have in mind.

  Read the article

• Ubuntu 14.10 no GUI or term login

  - by Lito

  I have updated yesterday my Ubuntu 14.10 installation with apt-get dist-upgrade. I was working all afternoon and after that I have rebooted computer. Once done it, lightdm doesn't starts (only gnome logo) and I can not view any of Ctrl + Shift + [1-6] terminals (cursor is blinking). I have read a lot of posts with no success: nividia/intel conflicts (I have a laptop with an Intel graphic card) I have enabled nomodeset and tried all this options My computer boots to a black screen, what options do I have to fix it? I have repaired grub I can load recovery/livecd/windows and mount partitions and network without problem I have all packages and system updated Here my logs. X11 not shows any error or problem, is loading all needed drivers without problem. How can I raise the level of debug? Best regards.

  Read the article

• Parallel Threading in Multi-Language Software?

  - by Smarty Twiti

  I'm developing a software that contain many modules/Daemon running in parallel manner, what i'm looking for is how to implement that, i cannot use Thread because some of those modules/Daemon are perhaps implemented in other languages (C,java,C#...). For example I'm using C for Hooking Messages exchanged between Windows kernel and top level applications, Java/C# to use some free library to simply parse XML(for example) or to accept and execute commands over the network..this can be done by C Language but just to improve productivity... Finally for GUI I'm using Ultimate++ (c++) that is like the main process that call and monitor(activate/deactivate/get state) of all other modules/Daemon through an interface. I admit that the development of each module/Daemon in a separate language greatly facilitates maintenance, but especially I am obliged to do that.. What is the best practice way to do that ? All helps will be appreciated.

  Read the article

• How does the HUD prioritize commands?

  - by user50849

  Every now and then I want to reach the "Edit Preferences" menu item in Firefox, and the HUD makes this very convenient. ALT + "Edi" will suggest exactly that to me. Something that I find annoying however is that if I complete the work "Edit" instead, the HUD will switch to suggest "Network Edit preferences" instead. While this is a perfectly valid match as well, it seems like an inconsistent behaviour to me. Could someone explain in more detail how the matching works, so that I can make better use of the HUD?

  Read the article

• How can I refactor my code to use fewer singletons?

  - by fish

  I started a component based, networked game (so far only working on the server). I know why singletons can be bad, but I can't think of another way to implement the same thing. So far I have: A GameState singleton (for managing the global state of the game, i.e. pre-game, running, exiting). A World singleton, which is the root entity for my entity graph An EntityFactory A ComponentFactory I'm thinking about adding a "MessageDispatcher" so individual components can subscribe to network messages. The factories do not have state, so I suppose they aren't so bad. However, the others do have global state, which is asking for trouble. How can I refactor my code so it uses fewer singletons?

  Read the article

• Your favorite LiveCD

  - by sova

  Perhaps this is a question better suited for linux.se but since I have servers on all environments I was wondering what your favorite LiveCD is. Wiki defines this, for those unfamiliar, as a CD or DVD containing a bootable computer operating system. Live CDs are unique in that they have the ability to run a complete, modern operating system on a computer lacking mutable secondary storage, such as a hard disk drive. Live USB flash drives are similar to live CDs, but often have the added functionality of automatically and transparently writing changes back to their bootable medium. I tend to stick with Knoppix, and today I have to register the machine on the network before I can get any of my utilities running via IP. Any suggestions?

  Read the article

• How to get VMware Workstation 8.0.4 work on Ubuntu 12.04 64 bit?

  - by user73987

  I've bought VMware Workstation 8 just today. After the installation I launched it and the application noticed me that "several modules must be compiled and loaded into the running kernel". During the process, VMware noticed me that was impossible to configure Virtual Network Devices and at the end, was impossible to start the services. The last message said that further information could be found at this address: /tmp/vmware-root-975001794/modconfig-22789.log So, I've pasted the content of the log message here. Can you help me or, rather, you suggest to wait for future updates of Ubuntu? My desktop environment is Unity.

  Read the article

• Dual Boot not recognizing new hard drive

  - by Grove

  I am a complete Linux newb..which will become obvious shortly. The story: I wanted to dual boot with Ubuntu. I already had windows on 1 hard drive (320gb), and I wanted Ubuntu on a 2nd hard drive (2tb). I setup the partitions using the "Something else" option - I left the first hard drive alone, and put a swap and a ext4 partition on the 2nd hard drive. When it asked me where the bootable device was, I put the first hard drive. The problem: Now that Ubuntu is installed and grub lets me pick which os to boot to, I boot to ubuntu JUST FINE. BUT when I go to the home folder and look at devices, the only drive showing is the 320 gb/old hard drive that windows was installed on. I can not see the 2 TB hard drive anywhere. This is strange because I setup the Ubuntu partition to be the 2 TB hard drive and I thought I installed ubunto on that partition. Thank you for your time and patience :)

  Read the article

• get_hosts script being ignored in LTSP setup on Ubuntu 12.04

  - by Shwetav

  We had a home-grown LTSP load-balancer based on LDM_SERVER and get_hosts in Ubuntu 10.04. After upgrading to Ubuntu 12.04, everything worked fine except that get_hosts is being ignored completely. If we put space delimited list of servers as LDM_SERVER in lts.conf, users can choose a server during login and things work fine. Tried both locations below without any luck so far: 1. /var/lib/tftpboot/ltsp/i386/get_hosts 2. /opt/ltsp/i386/etc/get_hosts Any pointers would be greatly appreciated.

  Read the article

• Video of my session from SQLBits 8 (Brighton)

  - by NeilHambly

  If you missed my session @ SQLBits 8 (Brighton) on "Queues & Waits" and are feeling somewhat brave, you can now view it in your own home/office and @ your leisure, so pull up a chair and settle in for a hour of "Waiting" .. hmmm that doesn't sound quite right but if you insist Follow this link and enjoy me if Full HDD if that is your preference (is that the right word ?), well hopefully you will not cringe quite as much as I did watching it {But I do think that is universal...(read more)

  Read the article

• Boost Your SEO Efforts With Twitter

  Search engine optimization techniques continue to expand so that more innovative ways of drawing traffic to your website can be used effectively. While the online revolution has changed many things in a common man's life, one exciting facet of the World Wide Web is social networking. With social networking giants such as Twitter, Facebook, LinkedIn, Orkut and MySpace hitting the pinnacle of popularity, people have the luxury of making online friends, interact with people irrespective of national boundaries and discuss world issues without any ethnic or racial biases. Webmasters and social network gurus have also capitalized on this immense opportunity to expand their businesses and draw more traffic to their websites.

  Read the article

• /usr/src is eating up all inodes

  - by klingone

  it seems /usr/src (apparently old kernels) used up all my inodes Dateisystem Inodes IBenutzt IFrei IUse% Eingehängt auf /dev/sda4 489600 489600 0 100% / devtmpfs 219658 539 219119 1% /dev none 219844 474 219370 1% /run none 219844 3 219841 1% /run/lock none 219844 8 219836 1% /run/shm /dev/sda6 5963776 8361 5955415 1% /home tried everything to remove/purge etc. the old kernels, without success.. dpkg is not working anymore, tried a few manual commands but 12.04 gives me nothing. apt-get etc. is not possible due to lack of space on the hard drive...which is not the problem obviously. however cannot install/ remove anything! read a lot about users with the same problem, but their solutions are not working for me. Anyone out there who could help? thanks a lot!

  Read the article

• River City Give Camp 4-6 Feb 2011 in Richmond!

  - by andyleonard

  I'm often approached by community members who seek new or better employment. One problem? Experience. You need experience to get a new or better job; you can't get experience without the new gig. </ Catch22 > River City Give Camp is a way to gain some experience, but it's much more than that - it's also a great way to network with others currently working in the field. Sign up ! Show them what you've got! :{>...(read more)

  Read the article

• What companies do what I'm interested in? [closed]

  - by Alex

  I'm a systems guy. People change their concentrations to avoid taking operating systems, while I took it during my first semester after transferring. I'm taking compilers and networks now, and I think they're awesome. And yet there are so many job postings looking for people to do work in things like web development, and so few postings looking for people to work in kernel hacking or network engineering. What sorts of companies do these things? I'm currently awaiting a contract in the mail for an internship with VMWare, so I'm not out of a job for the summer. Still, I'd like to companies do these things.

  Read the article

• How can I effectively use a netbook and a desktop computer together for programming?

  - by Mana

  Currently, in my workspace, I have a netbook sitting off to the side gathering dust while I write code on my desktop. As a result, the only use my netbook gets coding-wise is when I'm writing up a quick Python script to model a given problem or concept in class; I never use it at home for coding, or for anything at all, as it is all possible and faster on my (much more powerful) desktop. I feel like this is wrong and that I should be making better use of my netbook. What effective uses have you found for a netbook and a desktop together when programming (or for software development in general)? What are the merits of this practice?

  Read the article

• Unable to access media wiki pages from another computer?

  - by Kathiresan Jeyapandian

  I have set up a web server in my Windows 7 with easyPHP. The website works fine when I browse the locally via localhost or 127.0.0.1. But, unable to open the site from another computer which is in the same LAN or in connected to my LAN. My local IP is in the 10.x.x.x range. The firewall turned off on my private network. I've also tried by changing Listen 127.0.0.1:80 to Listen 80 In httpd.conf but still i'm unable to access the media wiki from other machines. Unable to browse the pages from other machines using localhost or using IP address (Ex: 10.x.x.x). Could you please let me know your suggestions and comments?

  Read the article

• What about the performance enhancement when using an SSD as the main disk?

  - by motumboe

  I'm planning to buy a new PC and I am thinking about using an SSD as the main disk. I'd also use a standard spinning disk and I'd mount it to /home. To the people already using such a setup: does this induce a practical, noticeable enhancement in performance? I think that access times, rather than transfer rates, are the more useful feature of SSD's. I would like to know if they have a noticeable effect on a desktop installation of Ubuntu. Thanks in advance!

  Read the article

• How to track inbound HTTP traffic using Plesk 10.4.4?

  - by hypercrypt

  I am running Plesk 10.4.4 on a Debian 6.0 server. The outbound traffic is being tracked but the inbound http traffic seems to be 0 at all times, i.e. looking at the DomainsTraffic and ClientsTraffic the http_in column is always 0. Is this a setting that I have missed? I've had a look and cannot find anything. How do I get Plesk to track the inbound HTTP traffic? I have already made sure that Home Tools & Settings Server settings had 'Include in the traffic calculation' set to 'inbound and outbound traffic', yet this does not solve the problem. Apache allows inbound traffic to be logged using %I in the log format, is there a way to get Plesk to add the %I to the log and then use that in bandwidth calculations?

  Read the article

• Free course on Java Embedded on the Raspberry Pi?

  - by A Tael

  Oracle is developing a free, on-line course on developing Oracle Java Embedded applications using a Raspberry Pi as the development platform. The course teaches experienced Java SE developers how to design and develop applications using Java ME Embedded 8 EA on a Raspberry Pi with physical devices, including: switches and Light Emitting Diodes (LED); temperature/barometric pressure sensors; Global Positioning System (GPS) sensors; and system interrupt timers. Additional modules include logging, threads, network I/O, file I/O, record management service, push registry, application management services and best practices for headless embedded devices.Sounds like great fun doesn't it? Read more about the course and give us your feedback in this short survey. <<Andy>>

  Read the article

• Connect divs with (non-straight) lines [migrated]

  - by Snailer

  I'd like to develop my site with a layout that looks somewhat like houses with connected plumbing, or multiple computers connected to a network. Basically, the will be boxes floating in space, with lines connecting some of the boxes. I'd like these lines to have some turns in them as well (just simple 90 degree corners) rather than just a straight line. My question is what is the best way to achieve this, and perhaps a small example. My thoughts were to use: PHP and CSS: I could create a background grid and then, with some complicated algorithms, draw paths using the grid's borders. This would be more dynamic, but I'm not sure I can plot the math all by myself. just CSS: Perhaps this is as simple as making some pre-drawn lines like L-shapes and T-junctions, then just placing and scaling them. But I don't believe there's a way to scale an image by slicing it.. so the line width would be scaled and thus each image would look different. Any thoughts?

  Read the article

< Previous Page | 699 700 701 702 703 704 705 706 707 708 709 710  | Next Page >