Search Results

Search found 54052 results on 2163 pages for 'run configuration'.

Page 709/2163 | < Previous Page | 705 706 707 708 709 710 711 712 713 714 715 716 | Next Page >

How to re-add a RAID-10 failed drive on Ubuntu?

- by thiesdiggity

I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm --manage --re-add /dev/md2 /dev/sdc1 I get the following error message: mdadm: Cannot open /dev/sdc1: Device or resource busy When I do a "cat /proc/mdstat" I get the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [r$ md2 : active raid10 sdb1[0] sdd1[3] 1953519872 blocks 64K chunks 2 near-copies [4/2] [U__U] md1 : active raid1 sda2[0] sdc2[1] 468853696 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[1] 19530688 blocks [2/2] [UU] unused devices: <none> When I run "/sbin/mdadm --detail /dev/md2" I get the following: /dev/md2: Version : 00.90 Creation Time : Mon Sep 5 23:41:13 2011 Raid Level : raid10 Array Size : 1953519872 (1863.02 GiB 2000.40 GB) Used Dev Size : 976759936 (931.51 GiB 1000.20 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Oct 25 09:25:08 2012 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : c6d87d27:aeefcb2e:d4453e2e:0b7266cb Events : 0.6688691 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed 2 0 0 2 removed 3 8 49 3 active sync /dev/sdd1 Output of df -h is: Filesystem Size Used Avail Use% Mounted on /dev/md1 441G 2.0G 416G 1% / none 32G 236K 32G 1% /dev tmpfs 32G 0 32G 0% /dev/shm none 32G 112K 32G 1% /var/run none 32G 0 32G 0% /var/lock none 32G 0 32G 0% /lib/init/rw tmpfs 64G 215M 63G 1% /mnt/vmware none 441G 2.0G 416G 1% /var/lib/ureadahead/debugfs /dev/mapper/RAID10VG-RAID10LV 1.8T 139G 1.6T 8% /mnt/RAID10 When I do a "fdisk -l" I can see all the drives needed for the RAID-10. The RAID-10 is part of the /dev/mapper, could that be the reason why the device is coming back as busy? Anyone have any suggestions on what I can try to get the drives back into the array? Any help would be greatly appreciated. Thanks!

Read the article
Application development : method to manage backgound process

- by Simon Dubois

I am developing an application with different behavior depending on the arguments : - "-config" starts a Gtk window to change options, start and close the daemon. - "-daemon" starts a background process that does something every X minutes. I already know how to use fork/system/exec etc... But I would like to know the main logic of such application to : - restart or refresh the daemon when configuration change. - keep only one instance of the daemon. I have red that killing the daemon to restart it is not a clean way to do. How other applications do ? (ubuntuone, weather forecast, rss feed working with notification area) Thanks for your help. PS : I don't want to create a system-wide daemon, just a user application with a background process.

Read the article
What Is The Proper Laptop Battery Care While Running Laptop Solely On Battery?

- by Boris_yo

Because of convenience, I had to move my laptop to another room away from room where I always ran laptop on UPS without using battery. Since so far I always run laptop on battery, I question the proper usage to prolong battery life. Currently I run laptop on battery with power supply so battery is constantly being charged until it is full 100% and when it is, I disconnect power supply and continue working until battery meter shows 10% remaining. That's when I plug in power supply and let it charge until 100% once again while I work. But it takes a lot of time to fully charge laptop while working since my power supply is 60W which should be the reason of such slow charge and I think the kind of charger that I use is express charger. The thought of charging laptop until full, all while doing my work makes me think that if it takes way more time to charge, it might keep battery running warm for the period of charging time which brings me to question about whether I should keep running laptop as I've described above or it would be better to leave power supply constantly connected to laptop to keep battery between 99%-100%? On one hand it won't keep battery warm but it will try to frequently supply charge to battery once it gets 99% to replenish charge to 100% (which might reduce battery life?). On the other hand if I'll keep working solely on battery and recharge it when below 10%, the battery will get warm but only when charged. Can anybody suggest the correct way of running laptop on battery to ensure better battery life? Dell Latitude E6420 Windows 7 64-bit

Read the article
SQL SERVER 2005 with Windows 7 Problems

- by azamsharp

First of all I restored the database from other server and now all the stored procedures are named as [azamsharp].[usp_getlatestposts]. I think [azamsharp] is prefixed since it was the user on the original server. Now, on my local machine this does not run. I don't want the [azamsharp] prefix with all the stored procedures. Also, when I right click on the Sproc I cannot even see the properties option. I am running the SQL SERVER 2005 on Windows 7. UPDATE: The weird thing is that if I access the production database from my machine I can see the properties option. So, there is really something wrong with Windows 7 security. UPDATE 2: When I ran the orphan users stored procedure it showed two users "azamsharp" and "dbo1". I fixed the "azamsharp" user but "dbo1" is not getting fixed. When I run the following script: exec sp_change_users_login 'update_one', 'dbo1', 'dbo1' I get the following error: Msg 15291, Level 16, State 1, Procedure sp_change_users_login, Line 131 Terminating this procedure. The Login name 'dbo1' is absent or invalid.

Read the article
Solr startup script problem

- by Camran

I have installed solr and it works finally... I have now problems setting it up to start automatically with a start command. I have followed a tutorial and created a file called solr in the /etc/init.d/solr dir... Here is that file: #!/bin/sh -e # SOLR auto-start # # description: auto-starts solr engine # processname: solr-production # pidfile: /var/run/solr-production.pid NAME="solr" PIDFILE="/var/run/solr-production.pid" LOG_FILE="/var/log/solr-production.log" SOLR_DIR="/etc/jetty" JAVA_OPTIONS="-Xmx1024m -DSTOP.PORT=8079 -DSTOP.KEY=stopkey -jar start.jar" JAVA="/usr/bin/java" start() { echo -n "Starting $NAME... " if [ -f $PIDFILE ]; then echo "is already running!" else cd $SOLR_DIR $JAVA $JAVA_OPTIONS 2> $LOG_FILE & sleep 2 echo `ps -ef | grep -v grep | grep java | awk '{print $2}'` > $PIDFILE echo "(Done)" fi return 0 } stop() { echo -n "Stopping $NAME... " if [ -f $PIDFILE ]; then cd $SOLR_DIR $JAVA $JAVA_OPTIONS --stop sleep 2 rm $PIDFILE echo "(Done)" else echo "can not stop, it is not running!" fi return 0 } case "$1" in start) start ;; stop) stop ;; restart) stop sleep 5 start ;; *) echo "Usage: $0 (start | stop | restart)" exit 1 ;; esac Whenever I do solr -start I get this error: "Error occurred during initialization of VM Could not reserve enough space for object heap" I think this is because of the file above... Also here is where I have solr installed: var/www/solr and here is the start.jar file located: var/www/start.jar Help me out if you know whats causing this. Thanks BTW: OS is ubuntu 9.10

Read the article
Sun Grid Engine (SGE) / limiting simultaneous array job sub-tasks

- by wfaulk

I am installing a Sun Grid Engine environment and I have a scheduler limit that I can't quite figure out how to implement. My users will create array jobs that have hundreds of sub-tasks. I would like to be able to limit those jobs to only running a set number of tasks at the same time, independent of other jobs. Like I might have one array job that I want to run 20 tasks at a time, and another I want to run 50 tasks at a time, and yet another that I'm fine running without limit. It seems like this ought to be doable, but I can't figure it out. There's a max_aj_instances configuration option, but that appears to apply globally to all array jobs. I can't see any way to use consumable resources, as I'd need a "complex attribute" that is per-job, and that feature doesn't seem to exist. It didn't look like resource quotas would work, but now I'm not so sure of that. It says "A resource quota set defines a maximum resource quota for a particular job request", but it's unclear if an array job's sub-tasks' resource requests will be aggregated for the purposes of the resource quota. I'm going to play with this, but hopefully someone already knows outright.

Read the article
Hostapd to connect laptop to Android

- by Kmegamind

i am trying to set up my laptop as an access point for my Android to use WiFi, so i knew that ubuntu sets the network as Ad-Hoc which is not discoverable by android, So i tried the method explained here -which i found on many other websites- but when i run hostapd.conf this error appears : nl80211: Failed to set interface wlan0 into AP mode nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0x8e488f8 user_data=0x8e48ea0 handler=0x807c5e0 ELOOP: remaining socket: sock=6 eloop_data=0x8e4aca8 user_data=(nil) handler=0x8086770 this is how my hostapd.conf looks like : interface=wlan0 driver=nl80211 ssid=Any_SSID_name hw_mode=g channel=1 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=Any_password wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP and this is my wireless card info : description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:73:51:f1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:f0300000-f0303fff

Read the article
XUbuntu 12.04 sound becomes distorted on ASUS-computers

- by Slava Fomin II

On my XUbuntu 12.04 Desktop from time to time audio becomes distorted, not the audio from some specific applications but every possible sounds are very noisy and barely recognizable. Then i go to: Applications Menu Multimedia PulseAudio Volume Control "Configuration"-tab and change Built-in Audio's Profile from my current profile to something else. After that audio becomes normal, until it breaks again and i have to repeat these steps. It's happening on two different computers: one is an ASUS-based Desktop and other is ASUS notebook. Maybe it's related to some common motherboard audio components. Motherboard is: ASUS P8P67 EVO REV 3.0 Netbook is: ASUS EEPC VX6 Any help will be much appreciated = )

Read the article
How to disable OSD notifications for specific email addresses?

- by Zuul

I receive several logs per day via email, either from testing operations, server status or backup resumes. Can I some how disable the notification balloon either by a specific email address, the email subject or any other possible filter, as to not be constantly notified about the success operations? I've looked within the Notify OSD Configuration, but couldn't find any option to this end. Since the email comes with different information when errors occur, I already have filters within Thunderbird as to move error logs to a folder that I keep tabs on... If relevant, I'm using Ubuntu 12.04 fully updated, and Thunderbird 15.0.1.

Read the article
Give access to specific services on Windows 7 Professional machines?

- by Chad Cook

We have some machines running Windows 7 Professional at our office. The typical user needs to have access to stop and start a service for a local program they run. These machines have a local web server and database installed and we need to restrict access to certain folders and services related to the web server and database for these users. The setup I have tried so far is to add the typical user as a Power User. I have been able to successfully restrict them from accessing certain folders (as far as I can tell) but now they do not have access to the service needed for starting and stopping the local program. My thought was to give them access to the specific service but I have not had any luck yet. In searching the web for solutions the only results I have found relate to Windows Server 2000 and 2003 and involve creating security templates and databases through the Microsoft Management Console. I am hesitant to try an approach like this as these articles are typically older and I worry this method is outdated. Is there a better way to accomplish the end goal of giving the user permission to run the service and restrict their access to certain folders? If any clarification is needed on the setup or what we are trying to achieve, please let me know. Thanks in advance.

Read the article
Hosting a server for websites, ftp and random use at home?

- by Zolomon

I'm wondering what's the best option for me if I want to move all my hosted websites (from a hosting company) to a server at my own home? Basically, the needs I have are: be able to host websites using PHP/ASP.NET (haven't really decided yet - both would be preferred!) enable FTP so I can create accounts for my family members to access the server for file handling SSH SSL - for secure connections (this is something you have to buy/apply for per domain, not sure if there are any server side settings that have to be made) be able to stream video remote desktop host home-brew applications that can run as services use either MySQl/SQLite/SQL for relational database storage What should I think of before I buy a server? What hardware will I need, what will limit my server? I basically want to learn networking better as I'm a software and web developer but haven't had the resources to acquire any serious toys until now. At the time of writing, most of my websites have 60 visits/day so I don't suspect them to be very demanding. Is there something I haven't thought of that I should have? What OS would you suggest I run? FreeBSD vs Windows Server vs ?

Read the article
ZFS for Database Log Files

- by user12620111

I've been troubled by drop outs in CPU usage in my application server, characterized by the CPUs suddenly going from close to 90% CPU busy to almost completely CPU idle for a few seconds. Here is an example of a drop out as shown by a snippet of vmstat data taken while the application server is under a heavy workload. # vmstat 1 kthr memory page disk faults cpu r b w swap free re mf pi po fr de sr s3 s4 s5 s6 in sy cs us sy id 1 0 0 130160176 116381952 0 16 0 0 0 0 0 0 0 0 0 207377 117715 203884 70 21 9 12 0 0 130160160 116381936 0 25 0 0 0 0 0 0 0 0 0 200413 117162 197250 70 20 9 11 0 0 130160176 116381920 0 16 0 0 0 0 0 0 1 0 0 203150 119365 200249 72 21 7 8 0 0 130160176 116377808 0 19 0 0 0 0 0 0 0 0 0 169826 96144 165194 56 17 27 0 0 0 130160176 116377800 0 16 0 0 0 0 0 0 0 0 1 10245 9376 9164 2 1 97 0 0 0 130160176 116377792 0 16 0 0 0 0 0 0 0 0 2 15742 12401 14784 4 1 95 0 0 0 130160176 116377776 2 16 0 0 0 0 0 0 1 0 0 19972 17703 19612 6 2 92 14 0 0 130160176 116377696 0 16 0 0 0 0 0 0 0 0 0 202794 116793 199807 71 21 8 9 0 0 130160160 116373584 0 30 0 0 0 0 0 0 18 0 0 203123 117857 198825 69 20 11 This behavior occurred consistently while the application server was processing synthetic transactions: HTTP requests from JMeter running on an external machine. I explored many theories trying to explain the drop outs, including: Unexpected JMeter behavior Network contention Java Garbage Collection Application Server thread pool problems Connection pool problems Database transaction processing Database I/O contention Graphing the CPU %idle led to a breakthrough: Several of the drop outs were 30 seconds apart. With that insight, I went digging through the data again and looking for other outliers that were 30 seconds apart. In the database server statistics, I found spikes in the iostat "asvc_t" (average response time of disk transactions, in milliseconds) for the disk drive that was being used for the database log files. Here is an example: extended device statistics r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device 0.0 2053.6 0.0 8234.3 0.0 0.2 0.0 0.1 0 24 c3t60080E5...F4F6d0s0 0.0 2162.2 0.0 8652.8 0.0 0.3 0.0 0.1 0 28 c3t60080E5...F4F6d0s0 0.0 1102.5 0.0 10012.8 0.0 4.5 0.0 4.1 0 69 c3t60080E5...F4F6d0s0 0.0 74.0 0.0 7920.6 0.0 10.0 0.0 135.1 0 100 c3t60080E5...F4F6d0s0 0.0 568.7 0.0 6674.0 0.0 6.4 0.0 11.2 0 90 c3t60080E5...F4F6d0s0 0.0 1358.0 0.0 5456.0 0.0 0.6 0.0 0.4 0 55 c3t60080E5...F4F6d0s0 0.0 1314.3 0.0 5285.2 0.0 0.7 0.0 0.5 0 70 c3t60080E5...F4F6d0s0 Here is a little more information about my database configuration: The database and application server were running on two different SPARC servers. Storage for the database was on a storage array connected via 8 gigabit Fibre Channel Data storage and log file were on different physical disk drives Reliable low latency I/O is provided by battery backed NVRAM Highly available: Two Fibre Channel links accessed via MPxIO Two Mirrored cache controllers The log file physical disks were mirrored in the storage device Database log files on a ZFS Filesystem with cutting-edge technologies, such as copy-on-write and end-to-end checksumming Why would I be getting service time spikes in my high-end storage? First, I wanted to verify that the database log disk service time spikes aligned with the application server CPU drop outs, and they did: At first, I guessed that the disk service time spikes might be related to flushing the write through cache on the storage device, but I was unable to validate that theory. After searching the WWW for a while, I decided to try using a separate log device: # zpool add ZFS-db-41 log c3t60080E500017D55C000015C150A9F8A7d0 The ZFS log device is configured in a similar manner as described above: two physical disks mirrored in the storage array. This change to the database storage configuration eliminated the application server CPU drop outs: Here is the zpool configuration: # zpool status ZFS-db-41 pool: ZFS-db-41 state: ONLINE scan: none requested config: NAME STATE ZFS-db-41 ONLINE c3t60080E5...F4F6d0 ONLINE logs c3t60080E5...F8A7d0 ONLINE Now, the I/O spikes look like this: extended device statistics r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device 0.0 1053.5 0.0 4234.1 0.0 0.8 0.0 0.7 0 75 c3t60080E5...F8A7d0s0 extended device statistics r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device 0.0 1131.8 0.0 4555.3 0.0 0.8 0.0 0.7 0 76 c3t60080E5...F8A7d0s0 extended device statistics r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device 0.0 1167.6 0.0 4682.2 0.0 0.7 0.0 0.6 0 74 c3t60080E5...F8A7d0s0 0.0 162.2 0.0 19153.9 0.0 0.7 0.0 4.2 0 12 c3t60080E5...F4F6d0s0 extended device statistics r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device 0.0 1247.2 0.0 4992.6 0.0 0.7 0.0 0.6 0 71 c3t60080E5...F8A7d0s0 0.0 41.0 0.0 70.0 0.0 0.1 0.0 1.6 0 2 c3t60080E5...F4F6d0s0 extended device statistics r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device 0.0 1241.3 0.0 4989.3 0.0 0.8 0.0 0.6 0 75 c3t60080E5...F8A7d0s0 extended device statistics r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device 0.0 1193.2 0.0 4772.9 0.0 0.7 0.0 0.6 0 71 c3t60080E5...F8A7d0s0 We can see the steady flow of 4k writes to the ZIL device from O_SYNC database log file writes. The spikes are from flushing the transaction group. Like almost all problems that I run into, once I thoroughly understand the problem, I find that other people have documented similar experiences. Thanks to all of you who have documented alternative approaches. Saved for another day: now that the problem is obvious, I should try "zfs:zfs_immediate_write_sz" as recommended in the ZFS Evil Tuning Guide. References: The ZFS Intent Log Solaris ZFS, Synchronous Writes and the ZIL Explained ZFS Evil Tuning Guide: Cache Flushes ZFS Evil Tuning Guide: Tuning ZFS for Database Performance

Read the article
Setting up httpd-vhosts.conf for multiple virtual hosts

- by Chris Sobolewski

I have a simple test setup using xampp at home, and I am getting really weird behavior when I attempt to set up multiple virtual hosts on this box. Here is my vhosts file: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] ServerName foo DocumentRoot "D:\wamp\xampp\htdocs\foo" ErrorLog logs/foo-error_log CustomLog logs/foo-access_log common <Directory "D:\wamp\xampp\htdocs\foo"> Options Indexes FollowSymLinks Includes execCGI AllowOverride All Order Allow,Deny Allow From All </Directory> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName bar DocumentRoot "D:\wamp\xampp\htdocs\bar" ErrorLog logs/bar-error_log CustomLog logs/bar-access_log common <Directory "D:\wamp\xampp\htdocs\bar"> Options Indexes FollowSymLinks Includes execCGI AllowOverride All Order Allow,Deny Allow From All </Directory> </VirtualHost> When I attempt to run visit the first site, it works as expected. When I attempt to run the second site, I get a weird hybrid mishmash of both sites. It's the weirdest thing.

Read the article
Internet Sharing on Lion breaks my routing table

- by seaders

When in the office, I'm connected to a 192.168.1.0/24 network. When Internet Sharing is off, when I run netstat -nr the first entry shows default 192.168.1.254 UGSc 10 62 en0 If I turn Internet sharing on, it shows default link#5 UCS 2 0 en1 This is obviously incorrect and breaks all connectivity of my machine. en1 is my wireless, whereas en0 is my ethernet. If I then disable Internet Sharing, it even deletes that incorrect route, so I'm left with no default route at all. Currently I have one script that I run when I share, or after, when I disable that does route delete default route add default 192.168.1.254 That fixes everything, but I'd love to know what's actually making this happen and how to properly fix it. And just to say that at some point a few months ago, this was working absolutely perfectly, with no hitches, then one day when I brought the laptop home, I couldn't disable the internet sharing, so I couldn't connect to my home wifi. I eventually had to restart the machine and since then this problem has been happening. Any help would be greatly appreciated, thank you.

Read the article
Did chkdsk make it harder to restore files?

- by neyl

My friend asked me to try and fix his loaded Sansa Clip + which wasn't playing. After opening it in MSC mode I discovered that the Music directory was empty and total of all files was only a few MB. However Disk properties showed me that it was 7Gb full. I then ran Tools - Error Checking and Windows dutifully informed me that disk was corrupt and I should run again Allowing Windows to Fix Errors. I did that and it told me everything was fixed and that all files were placed in FOUND.000 Dir. FOUND.000 was about 7.5 GB with FILE0000-1546 . CHK. (I am aware of methods like ChkBack to scan and convert to mp3 etc BUT Original filenames and structure needed!) Now I started getting worried that I made things worse! I have plenty of experience with Data Recovery Programs - Recuva, Restore My Files etc. and I was anyhow planning to use them to scan the drive. But NOW after CHKDSK "fixed" the drive maybe it modified critical FAT information vital for data recovery. So I run these programs and 0!!!. No trace of files! I tried a ton of Recovery Programs with same results TILL EaseUS Data Recovery Wizard found all files and I purchased program for $55! My Question In your opinion - did running CHKDSK with automatic fixing of errors make matters worse (i.e. many data recovery progs. didn't find a trace and they would have done if not for chkdsk) or was the filesystem too corrupt anyhow for regular File Recovery Progs.? If I would be a Professional - would I be responsible for running CHKDSK - automatic Fixing. Do you know of a better Data Recovery Program than EaseUs Data Recovery wizard - According to my experience I haven't found better!? Thanks

Read the article
Connect Lenovo W520 with TV using VGA output

- by el10780

I am trying to connect my Lenovo Thinkpad W520 with my 32 inch TV (Samsung) using he VGA output.The problem is that after connecting it with the TV I go to System Settings and then Monitors but it doesn't show up there.I rebooted my system and again nothing happened.So I tried to change my default video card in the BIOS and I chose to boot with Intel's card only.Again though nothing happened.I didn't tried with my NVidia video card because last time I did that Ubuntu was completely destroyed after saving the configuration file through the NVidia's X Server Control Panel.My laptop has NVidia Optimus technology,but I can choose from the BIOS which video card I want to use.After running : lspci | grep VGA in terminal the results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (It shows only the Intel's video card because curently I have chose to boot using only Intel's video card.If I chose from the BIOS that I want to use the NVidia Optimus Technology and the option to let the system whether or not the Optimus technology is supported then both cards will show up in terminal after running lspci | grep VGA.)

Read the article
Un mail qui s'auto-supprime après lecture pour garantir la confidentialité, ou même sans avoir été lu du tout : un brevet de AT&T

Un mail qui s'auto-supprime après lecture pour garantir la confidentialité Ou même sans lecture, un brevet déposé par AT&TSi vous n'avez pas eu votre dose de roman d'espionnage avec l'affaire Snowden/PRISM, ce brevet de AT&T va certainement vous combler.Le géant des Telecoms américains vient en effet d'imaginer un mail à la « Mission Impossible » qui s'auto-supprime.Deux options sont possibles : soit le mail disparaît une fois ouvert, lu puis fermé. Soit le mail est effacé à une date et une heure donnée, que le destinataire l'ait lu ou pas (les puristes feront remarquer que l'on n'est donc pas exactement dans la configuration imposée à Jim Phelps).

Read the article
What is the ideal way to set up multiple FTP enabled web accounts on Fedora?

- by Nicholas Flynt

I'm setting up a test server for use as a web development platform, and I'd like to mimic as closely as I can a typical shared hosting setup. That is, I'd like my server to have multple user FTP accounts, each of which links to a directory containing the webroot of the site, and I'd like apache to be able to easily see and manupulate these files. I'll admit: I'm not as familiar with Fedora as I'd like, I run Ubuntu on my home box and SElinux is giving me some grief. My initial plan was to have each user FTP into their home directory, and put the web directory there as well, but SElinux throws a hissy fit when apache tries to access anything outside of its web directory, so that plan was a no go. Would it be wise to continue this route, and perhaps mount web directories in user home folders so that FTP could still be used to access them, even though apache saw them in var/www like it expects? Would it make more sense to set up custom FTP accounts and use a single FTP user on the server box? What's the general course of action on something like this? I'm using vsftpd right now to host web directories, which is why I'm liking the home directory approach (it's simple and secure) but of course there's bound to be a better way to go about it. Thanks. (I'll leave other things, like restricted DB access and such, to another post. I'm interested right now with just getting FTP and apache to play nice in a multi-user environment.) PS: For the record, an issue I ran into when doing all of this was that if apache isn't running as the same user as the FTP account is saving as, there are permissions errors when FTP creates files, requiring the remote user to chmod the files to fix it. A logical fix would be to run apache in a special group, put all web users in this group, and have FTP access default to giving this group read/write access to everything like apache would expect, but I never could figure out how to accomplish this. Bonus points and cake if you know a solution.

Read the article
Migrating Ruby on Rails Website to New Server (Linux)

- by GarytheWorm

I have an existing website that is a Ruby on Rails project. I have another server i need to transfer the existing website too. The server i wish to transfer too was originally hosting the website so has the necessary gems/configuration are installed. I have tar the current releases shared dir from the old server and transfered them over to the new server. I have then unpack the tar in the apps directory to the new location which is a different URL path. My problem is now as you can see below that the path on the current - is pointing to the old url. ( i ran ls -la to see owenership) How can i change this current path to read with my new web address? current releases shared sitepack.tar root@server1:/var/www/clients/client1/NEWSITE.com/web/apps# ls -la current - /var/www/OLDSITE.com/web/apps/releases/20120130171636 root@server1:/var/www/clients/client1/NEWSITE.com/web/apps#

Read the article
How do I create a read only MySQL user for backup purposes with mysqldump?

- by stickmangumby

I'm using the automysqlbackup script to dump my mysql databases, but I want to have a read-only user to do this with so that I'm not storing my root database password in a plaintext file. I've created a user like so: grant select, lock tables on *.* to 'username'@'localhost' identified by 'password'; When I run mysqldump (either through automysqlbackup or directly) I get the following warning: mysqldump: Got error: 1044: Access denied for user 'username'@'localhost' to database 'information_schema' when using LOCK TABLES Am I doing it wrong? Do I need additional grants for my readonly user? Or can only root lock the information_schema table? What's going on? Edit: GAH and now it works. I may not have run FLUSH PRIVILEGES previously. As an aside, how often does this occur automatically? Edit: No, it doesn't work. Running mysqldump -u username -p --all-databases > dump.sql manually doesn't generate an error, but doesn't dump information_schema. automysqlbackup does raise an error.

Read the article
How to disable the Mount notification in Gnome 3.4?

- by Thompson

How to disable those annoying notifications when you plug a new disk in, or connect to a network and so on.... I know that if I add a device to a mount script they will be mounted on boot thus not showing me the notification, which I did for my hard drives, but it doesn't help with all those flash disks I have... I can't add them all that would be silly. I looked at: How can I disable gnome-shell's notification area? ... but they didn't help, since the code was different I also looked at configuration editor, but I think it can only disable auto-mount when inserted, it doesn't disable notification...

Read the article
SH404SEF URLs in Joomla 1.5

- by Tao Bellamine

I have two modules to play with urls, the global configuration module and the sh404sef module. The global config is set to "Sef urls: YES" and "mod rewrite enabled: YES" and the sh404sef is set "url optimization: NO". My problem is, even with "Sef urls" set in the global config, my urls still don't seem to be that "user friendly" so I turn on the "Url optimization" using the sh404sef module, and I get better descriptive urls. However, the problem I inherit from doing this is that my dynamically populated chronoforms get messed up (only the chrono forms, other forms are fine); These forms are now showing up at the homepage instead of their own reserved page. Here's an example: Old form "GOOD" url: http://www.mycraftwork.com/index.php?option=com_content&view=article&id=94 New optimized "BAD" URL: http://www.mycraftwork.com/handthrown-pottery/alladin-teapot/index.php?option=com_content&view=article&id=94 Any help would be GREATLY appreciated! I can even turn the sh404sef on and off if some people are interested in seeing the issue LIVE. Thanks!! Tao Bellamine

Read the article
Windows 2008 server smart card security module problem

- by chris13work

Hi, I've got a smart card reader and a server application using it as a security module. If I run it under DOS prompt, everything is fine. The server is running and clients can connect to it. I tried to install the server as window service and start it. The server starts but always gives back authentication error because it cannot call the smart card to do encryption. Then I tried to start it with task scheduler and set the trigger factor as "on startup". The server starts also but still cannot access the smart card reader. Then I tried remote desktop to the machine and run the server application under DOS prompt. Same error is returned. The situation is that the smart card reader only works under active console desktop environment. In the server application, WINSCARD API is used to access the smart card reader. Any suggestion so that we can access the smart card reader in running services? OS: Windows Server 2008 Smart Card Driver: Windows USB smart card Reader Smart Card API: WINSCARD

Read the article
Windows 2008 server smart card security module problem

- by chris13work

Hi, I've got a smart card reader and a server application using it as a security module. If I run it under DOS prompt, everything is fine. The server is running and clients can connect to it. I tried to install the server as window service and start it. The server starts but always gives back authentication error because it cannot call the smart card to do encryption. Then I tried to start it with task scheduler and set the trigger factor as "on startup". The server starts also but still cannot access the smart card reader. Then I tried remote desktop to the machine and run the server application under DOS prompt. Same error is returned. The situation is that the smart card reader only works under active console desktop environment. In the server application, WINSCARD API is used to access the smart card reader. Any suggestion so that we can access the smart card reader in running services? OS: Windows Server 2008 Smart Card Driver: Windows USB smart card Reader Smart Card API: WINSCARD

Read the article
'ia32-libs is not installed' while installing Skype on Ubuntu

- by Vit Kos

I downloaded skype from official site, but when installing I get this type of error (Reading database ... 100% (Reading database ... 150271 files and directories currently installed.) Unpacking skype (from .../skype-ubuntu_4.0.0.8-1_amd64.deb) ... dpkg: dependency problems prevent configuration of skype: skype depends on ia32-libs; however: Package ia32-libs is not installed. dpkg: error processing skype (--install): dependency problems - leaving unconfigured Processing triggers for desktop-file-utils ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for gnome-menus ... Read about that I need to install ia32-libs. Tried to install them like this sudo apt-get install package-name:i386 But it doesn't find it. Any hint? Thx.

Read the article

< Previous Page | 705 706 707 708 709 710 711 712 713 714 715 716 | Next Page >