Search Results

Search found 2451 results on 99 pages for 'guest additions'.

Page 71/99 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

  • Will SSD degrade when running VMWare Workstation from SSD?

    - by Andrey Botalov
    My main OS (Windows 7 or 8) is runned from SSD. I'd want to run Mac OS X 10.7 or 10.8 using VMWare workstation. I've heard that VMWare doesn't support TRIM and other things to optimize SSD usage. So SSD will quickly degrade if VM will be runned from SSD. Will it be better to put guest OS's files (.vmdk and the rest) to external HDD (connected through USB 2 or 3) instead of SSD? What advantages and disadvantages it will give? What if VM will be put to internal HDD? At what drive type performance of VM will be better?

    Read the article

  • Can't access the Internet in VMware Workstation

    - by asunnysunday
    I'm using VMware 7.1.2 in Windows 7 with Ubuntu 11.04 as a guest OS. In the host OS (Windows 7), I can access the Internet without any problems but in the virtual machine I can't access the Internet. I've tried the following but with no success: Use all methods of connecting to the Internet in "Virtual Machine Settings": Bridged, NAT, Custom; none work. Used cabled and wireless connections on the PC - neither of them work. I've used Ubuntu in VMware for several months - previously the Internet was always accessible. Could the cause of this be because I upgraded to Ubuntu 11.04?

    Read the article

  • How to setup VM in KVM? Qcow or LVM etc.

    - by JohnAdams
    Finally, after quite a bit of this vs that, I have chosen to virtualize a couple of my servers with KVM. I did do a test setup as well, but I have a few questions about setting VM's in KVM. Would appreciate pointers. What is the best storage to use - Qcow2 or LVM? I like the fact that I can copy the VM file easily with a Qcow2 but what about LVM, how do I take a backup or make copy on a development server to play with? I know I can clone a LVM, but how do I bring to my development server? How do I setup the guest partitioning? For example, when setting up Ubuntu inside Ubuntu, do I choose LVM for that VM or regular fdisk partitioning? Can I increase the partition size then later, if I need a bigger disk?

    Read the article

  • "Countersigning" a CA with openssl

    - by Tom O'Connor
    I'm pretty used to creating the PKI used for x509 authentication for whatever reason, SSL Client Verification being the main reason for doing it. I've just started to dabble with OpenVPN (Which I suppose is doing the same things as Apache would do with the Certificate Authority (CA) certificate) We've got a whole bunch of subdomains, and applicances which currently all present their own self-signed certificates. We're tired of having to accept exceptions in Chrome, and we think it must look pretty rough for our clients having our address bar come up red. For that, I'm comfortable to buy a SSL Wildcard CN=*.mycompany.com. That's no problem. What I don't seem to be able to find out is: Can we have our Internal CA root signed as a child of our wildcard certificate, so that installing that cert into guest devices/browsers/whatever doesn't present anything about an untrusted root? Also, on a bit of a side point, why does the addition of a wildcard double the cost of certificate purchase?

    Read the article

  • how to clone a physical "individual partition" vmdk into a "local" (file-based) vmdk?

    - by BJH
    Hello. I have a physical disk with a small (60GB) partition containing my guest OS. The physical disk also contains a large (240GB) block of unpartitioned space. My vmdk is defined as a physical "individual partition". I want to convert the source physical "individual partition" vmdk into a local (file-based) vmdk. The command - vmware-vdiskmanager -r sourcevmdk targetvmdk -t 2 creates a 300GB vmdk that includes both the desired 60GB "individual partition" and the 240GB of useless unpartitioned space ! How can I create a local vmdk with just the individual partition?

    Read the article

  • Open Directory authenticated bind succeeds, but creates incomplete record

    - by Jay Thompson
    I have about a dozen Macs running 10.6.7 or 10.6.8, which are all failing to bind properly to my new 10.7.4 Server OD. I can bind them just fine via Directory Utility or dsconfigldap, and it reports success. However, when I look at the record, it is failing to write the MAC address. Even if I manually update the record with the MAC address, MCX doesn't do anything and clients can't log in to OD accounts. All of the affected clients have hundreds of lines in the /Library/Logs/DirectoryService.error.log like so: 2012-09-15 22:23:18 EDT - T[0x00007FFF70292CC0] - GetMACAddress returned 0x *** bad control string *** 8x I do know that all of these clients were previously managed with the Guest computer account, and I also know that they were all imaged with a DeployStudio image when they were purchased. I've tried dscacheutil -flushcache, but after that I'm drawing a blank. Google has a few hits, but nothing very helpful. Re-imaging would be ideal but probably isn't going to happen. Anyone come across this before?

    Read the article

  • Moving Domain Controller Guests between Hyper-V Hosts

    - by Jim
    We're moving our domain controller to a new Hyper-V host. I read it on TechNet about not using export on a VM running as DC (although I saw a lot of answers on TechNet suggesting doing so to move DC). What we plan to do is shutdown the VM, move the VHD to the new Hyper-V host, then create a new VM using that VHD. I don't think USN rollback would occur since it's like shutting down the VM and starting it back up. We have another Hyper-V host with a DC guest that will be running during the migration. All the hosts and VMs are running Windows Server 2008 R2. Is it a good way to move virtualize DC b/t hosts? If not, how should I proceed?

    Read the article

  • How to setup a simple Ubuntu Server Tomcat cluster on VirtualBox for testing?

    - by Alex Pakka
    I am looking for a step by step instructions to setup at leat two (and later more) simple Ubuntu Virtual Core 12.10 Server VMs on Oracle VirtualBox under Windows 7 64bit. The test setup would be: Apache HTTP server on the Windows host acting as a Load Balancer. The result will be that going to http://localhost:8080 would balance between two nodes and prove session replication. Two lean, small footprint Ubuntu Server guest nodes with Java 7 and Tomcat 7. The intention is to help everyone doing High Availability / Load Balancing development and testing to create a reasonable environment on the local workstation or mainstream notebook in as little time as possible.

    Read the article

  • Can I run virtualized 64-bit Operating Systems if my CPU doesn't support VT-X?

    - by tintinmj
    I have installed VMWare 10.0 workstation on my Compaq CQ60-615DX laptop. The Operating System is Windows 7 Home Premium. When I tried to run Ubuntu 14.04 64-bit in a virtual machine in VMWare I get an error saying: This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x. For more detailed information, see http://vmware.com/info?id=152. So I googled and found that I have to enable Intel VT-x. But I found out that my processor doesn't support Intel® Virtualization Technology (VT-x). So am I doomed and can I never run any virtual OS on my laptop? Or can I run 32-bit OSes?

    Read the article

  • suddenly can't connect to Windows 7 PC from xbmc

    - by Damon
    I have xbmc installed on a softmodded classic xbox and all of a sudden I cannot connect to the shared folders on my Windows 7 PC. Well, it can connect but it wants a username and password, but none exist on my computer. It's been several weeks since I last used it, but it was working fine then! and no particular changes I can think of aside from I guess a few Windows updates. I've seen reference online to Windows Live essentials causing issues with file sharing, but I don't even have that installed. And I made sure to tick 'turn off password protected sharing' in my advanced network setup. I had the guest account turned off and working fine before, and tried turning it on but no luck. I can access my shared folders fine from other Computers and a ps3. I've read a couple threads of similar situations on various folders and none of their solutions have worked.

    Read the article

  • Which simple server virtualization solution to use?

    - by vvanscherpenseel
    For one part of our hosting platform we are currently using VMware Server 2 to create two virtual machines on one physical machine. One VM is used for hosting of small websites, the other VM is used as a staging environment. Both the host OS and guest OSes run CentOS Linux. Support for VMWare Server 2 has been discontinued and we are currently looking for a replacement. We only use basic functionality (we don't use snapshots, moving around VMs to different physical machines, or other 'advanced' functionality'). Just a box, with two VMs. We are looking for a virtualization solution that has long-term support, is stable and allows configuration/management from Mac OSx (I understood that Xen only has a Windows client). What would be the right solution for us?

    Read the article

  • 7.0.1 and Photoshop openGL requirements

    - by mcgd
    Hi, I'm running Workstation 7.0.1 on a 64-bit Linux host, with a Vista guest, and the Aero theme works a treat - full marks for getting that working! However, when running Photoshop there are some operations (like interactive image rotation) that seem to require graphics support that VMWare doesn't have - attempting to do these operations returns an error that the functionality "only works with OpenGL enabled windows". It seems that it needs OpenGL 2.0 and Shader Model 3.0 which I gather are supported under Workstation 7 - do I need to put in additional settings of some kind? I've updated to the right version of VMWare Tools, and the video driver is listed as "VMWare SVGA 3D (Microsoft Corporation - WDDM)". I see that in 6.5 there was an option to switch between the beta WDDM driver and the SVGAII driver, but I assume the features of both of these would have been merged into the standard driver in 7.0? Thanks -Matthew

    Read the article

  • TCP/IP communication between Hyper-V host and guests

    - by Tedd Hansen
    This may be a simple one. :) I have a simple Hyper-V setup with a few guest os running. The host has 1 physical network adapter with a static IP assigned to it. The guests have network adapters assigned to "Internet" (Hyper-V network) which is bound to the physical host network adapter (Hyper-V "External" connection type). I am not able to communicate (ping or anything else) between guests and host. I've checked firewall and it seems fine (ports open from anywhere still don't work). I'm trying to communicate with the hosts IP assigned to the same physical interface that the guests are sharing. Guests can communicate between them just fine. I can't seem to find any relevant setting (I might just be missing it). So my questions: How do I fix it so host and guests can communicate?

    Read the article

  • How to put fear of God (law) into Wi-Fi hacking neighbors [closed]

    - by Shakehar
    I live in an apartment and some new guys have apparently moved into one of the apartments. They have been shamelessly hacking into my WiFi. Mine was initially a WEP encrypted network and out of laziness I just limited and reserved the IPS on my router for the people in my house. Yesterday I had to free up an IP for a guest in my house but before he could join the network these guys connected in. I have changed my encryption to WPA2 and hope they dont have the hardware/patience required to hack into it, but there are many wi-fi networks in my apartment most of which are secured using WEP. I don't really want to call the police on them. Is there any way to deter them from misusing other people's wi-fi ? I have gone through I think someone else has access to my wireless network. What next? but I have already taken the steps mentioned there.

    Read the article

  • Mount cifs share anonymously

    - by churnd
    I have a Windows 2003 Server sharing out a few folders as read-only to "Everyone". The server is a domain member, so I'm not able to connect to the share on computers that aren't on the domain without passing some form of credentials. I have a linux box that I want to mount the share on at startup, so I want to put the share mountpoint in fstab. I have this setup by specifying a credentials file that is only readable by root, but I would rather either not use a credentials file or specify some guest/anonymous user. Can I do that, & if so, how?

    Read the article

  • KVM vs Hyper-V. Which hypervisor is best for windows guests?

    - by user198851
    I am currently testing openstack for windows guests (XP and 7). I have deployed openstack "all in one" on system with following specs Processor corei5. (4 physical cores and 8 Threads with HT Technology) RAM 8 GB. HD 500 GB. I have created 4 windows xp guests with 512MB RAM and 1VCPU. On each windows guest i have installed visual studio 2008 only. In nova.conf CPU Over-Commit ratio is 2 for better performance (as mentioned in openstack operation guide). Using KVM as hyerpvisor. I have observed poor performance when simultaneously using visual studio in four windows instances. How i can improve performance ? Should i use KVM or Hyper-V ? or any other suggestion ?

    Read the article

  • Accessing SVN Repository on external drive

    - by Stephen
    I've installed SVN on my Raspberry PI and configured it to access the repository on an external hard drive. In /etc/fstab, I've have the following: //192.168.1.12/SHARE/repos /media/repos cifs sec=ntlm,username=Guest,password=,_netdev,dir_mode=0777,file_mode=0777 0 0 This mounts with no issues. When I go to add a project to the repository using the following command: sudo svn import mywebsite/ file://media/repos/mainrepository/mywebsite/ -m "Initial Upload" I get the following error: svn: E170000: Unable to connect to a repository at URL 'file://media/repos/mainrepository/mywebsite' svn: E170000: Unable to open an ra_local session to URL svn: E170000: Local URL 'file://media/repos/mainrepository/mywebsite' contains unsupported hostname The only thing I think maybe causing the issue is the file settings: drwxrwxrwx 2 root root 0 Jun 11 2009 repos As you can see the owner is root, I think it needs to be www-data, but for some reason I can't change it. Any help appreciated.

    Read the article

  • mail server checklist..

    - by Jeff
    currently we ran into some issues with our mail server setup. im preparing a list of actions that we should enforce and use in order to maintain a proper email solution within our company. we have around 80 exchange users, and send mass emails out almost on a monthly bases to 20,000 + customers each time.. the checklist i currently have: 1) mcafee mxlogic 'cloud' anti-spam functionality for incoming message. 2) antivirus on each computer in company 3) antivirus on exchange and DNS servers 4) setup SPF record 5) setup DKIM 6) setup domainkey 7) setup senderID 8) submit spf to microsoft, yahoo, etc. for 'whitelist' purposes. 9) configure size limits for messages in exchange to safe numbers 10) i have 2 outside IPs for my email server, incase one gets blacklisted, switch to the backup. 11) my internet site rests on a different ip than the mail server 12) all mass emails for company sent through 3rd party company (listtrak.com) 13) setup domain alias, media, enews, and bounce for the 3rd party mass mail software. 14) verify the setup using [email protected] 15) configure group policy and our opendns.org account to prevent unwanted actions and website viewing mass emails: 1) schedule them to send different amounts at different times (1,000 at 10am, 1,000 at 4pm, 1,000 10am next day).. 2) setup user prefences, decide what they want to receive ect. ( there interests) 3) send a more steady flow of email, maybe 100 a week with top new products instead of 20,000k every other month.. if anyone has suggestions or additions/subtractions to this checklist they are greatly appreciated. thank you

    Read the article

  • Virtualbox PUEL Interpretation

    - by modernzombie
    Sorry if this seems like a lame question but I want to be sure before making a decision. The Virtualbox PUEL license says “Personal Use” requires that you use the Product on the same Host Computer where you installed it yourself and that no more than one client connect to that Host Computer at a time for the purpose of displaying Guest Computers remotely. I take this to mean that if I want to setup a development server (web server) that's only used by me to do my work this falls under personal use. But if I make this server available for clients to connect to the websites to view my progress this is no longer personal use also meaning that using Vbox to run a production web server is also against the license. Again sorry if this is a dumb question but I find it hard to follow the wording used in licenses. I know I could go with OSE but I have not looked into VNC versus RDP yet. Thanks.

    Read the article

  • Moving to the next line to populate an excel file from VBA

    - by edmon
    I have the below code that takes certain fields from my MS Access (A small Hotel Reservation Database)form and populates defined cells in the said Excel file. Dim objXLApp As Object Dim objXLBook As Object Set objXLApp = CreateObject("Excel.Application") Set objXLBook = objXLApp.Workbooks.Open("Y:\123files\File\Hotel Reservation.xls") objXLApp.Application.Visible = True objXLBook.ActiveSheet.Range("B2") = Me.GuestFirstName & " " & GuestLastName objXLBook.ActiveSheet.Range("C2") = Me.PhoneNumber objXLBook.ActiveSheet.Range("E2") = Me.cboCheckInDate objXLBook.ActiveSheet.Range("F2") = Me.cboCheckOutDate objXLBook.ActiveSheet.Range("H2") = Me.RoomType objXLBook.ActiveSheet.Range("I2") = Me.RoomNumber End Sub How can I keep populating a new Guest to the same Excel file just on the next row?

    Read the article

  • Problem communicating with one machine in my domain

    - by pmaroun
    Context: 3 HyperV guest images (DC, SQL, MOSS) 1 internal network 1 domain (PJM.COM) DC: 192.168.0.192 SQL: 192.168.0.153 MOSS:192.168.0.160 I am having communication problems from/to the MOSS machine from the other two. I removed the MOSS machine from the domain and cannot rejoin. When I ping the MOSS machine from DC, I get the following response: Pinging MOSS [192.168.0.152] Reply from 192.168.0.192 Destination host unreachable (4 times) When I ping the MOSS machine from SQL, I get the following response: Pinging MOSS [192.168.0.152] Reply from 192.168.0.153 Destination host unreachable (4 times) From the MOSS machine, I can ping the server names, however I cannot ping the FQDN. When I ping from the DC and SQL machines, I get IPv4 addresses. When I ping from the MOSS machine, I get IPv6 addresses. I'm a developer and don't know what steps to take to resolve this issue. Please help!?

    Read the article

  • Pointing a subdomain at a file

    - by Seva Alekseyev
    Switched hosting recently (Linux, CPanel, WHM). At the old host, there was a subdomain that had a file (instead of a directory) as a root. The file was a CGI script. The said subdomain was created via CPanel by me a while ago. At the new host, I'm trying to recreate this subdomain. And I get the following error: The directory, /home/(...)/cgi-bin/guest.cgi could not be created. Is there a tweak somewhere that enables this functionality? EDIT: tried to repeat the trick on the old site, and I could not. CPanel update broke it, maybe?

    Read the article

  • Directory permissions on Ubuntu Server 10.04 LTS

    - by SebastianOpperman
    I have set up a second drive on Ubuntu Server. The directory displays correctly but Windows users cannot write or create files on the directory. I have Samba set up so Windows can access the drives. here is the last bit of my /etc/samba/smb.conf [personeel] path = /media/windows browsable = yes guest ok = yes writable = yes read only = no create mask = 0775 directory mask = 0775 I want the directory to be shared with writable permissions to everyone who can access the Ubuntu Server. I have tried sudo chmod but to no success. Any help would be appreciated

    Read the article

  • Imported Hyper-V VM hangs

    - by BParker
    I have a pair of Hyper-V servers (Server 2008 R2 + Hyper-V role). I have duplicated one VM (exported from the first Hyper-V server to the Second) which seems to keep hanging. The VM is running XP SP3, and has the Virtual Additions installed. The first version runs fine, cpu normally around 0%-2% when idle and responds happily. The second version runs very poorly, and keeps running at an idle of around 8% cpu. I have checked the VM with Process Explorer, and the Idle process is (as expected) taking nearly all the cpu time, but what it's not using doesn't seem to show up in any other process. For example at one point idle dipped to 73%, but i could only account for anoth 4.5% in other processes. After some time (around 1-2 days) the VM seems to become so unresponsive, the only way to resurect it is to power-off the VM and reboot (shutdown via the Hyper- V console of via the VM seems to be impossible). Does anyone have any suggestions on how to trace the source of the problem? Thanks

    Read the article

  • Page loading hangs and never times out (Apache)

    - by Lucas -luky- N.
    I have set up Apache2 on a guest Ubuntu 10.04 OS (virtualbox). I have created a "big" HTML file (4MB) with only plain text and when I access a page through my local IP address such as http://192.168.0.100 it successfully loads the entire page. However, when I try to access it through my public IP address the browser loads part of the page and then hangs forever on "loading". I can load a simple webpage though. I'm not sure whether it's an issue with my Apache configuration, Virtualbox, Router or Modem. Any clues? Tried enabling Debug and mod_status but didn't find any useful information.

    Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >