Search Results

Search found 19997 results on 800 pages for 'software schedules'.

Page 711/800 | < Previous Page | 707 708 709 710 711 712 713 714 715 716 717 718  | Next Page >

• Low-profile, PCI Express, x1 video card with VGA-out?

  - by Dandy

  I just bought an Acer Aspire EasyStore H340 system (http://us.acer.com/acer/productv.do?LanguageISOCtxParam=en&kcond61e.c2att101=54825&sp=page16e&ctx2.c2att1=25&link=ln438e&CountryISOCtxParam=US&ctx1g.c2att92=450&ctx1.att21k=1&CRC=936243954) It comes with Windows Home Server, which I don't particularly care for (too dumbed down for my liking)--I bought the box mainly for the form factor, and intend to install Server 2008 on it and have it run as a small domain controller. The geniuses at Acer however went out of their way to ensure you can only run Home Server--you can only connect to it via the Home Server Connector software, as it has no video-out whatsoever (so essentially, there's no way to even get into the BIOS). It only has a low-profile, PCI Express x1 slot. It turns out to be way harder than I thought to locate a video card that both has an x1 connector, and is low-profile (I'd really rather not snip the bracket at the back just so it'll fit the case). I know they're out there, and I've seen one with Display Port outputs, but I don't have a monitor with this connection. So to reiterate, it needs to be: - x1 connector - low profile - VGA out (though DVI would be okay; I have some spare adapters) Can anyone recommend anything at all?

  Read the article

• Apache https is slow

  - by raucous12

  Hey, I've set apache up to use SSL with a self signed certificate. With https (KeepAlive on), I can get over 3000 requests per second. However, with https (KeepAlive off), I can only get 13 requests per second. I know there is supposed to be a bit of an overhead, but this seems abnormal. Can anyone suggest how I might go about debugging this. Here is the ab log for https: Server Software: Apache/2.2.3 Server Hostname: 127.0.0.1 Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,DHE-RSA-AES256-SHA,4096,256 Document Path: /hello.html Document Length: 29 bytes Concurrency Level: 5 Time taken for tests: 30.49425 seconds Complete requests: 411 Failed requests: 0 Write errors: 0 Total transferred: 119601 bytes HTML transferred: 11919 bytes Requests per second: 13.68 [#/sec] (mean) Time per request: 365.565 [ms] (mean) Time per request: 73.113 [ms] (mean, across all concurrent requests) Transfer rate: 3.86 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 190 347 74.3 333 716 Processing: 0 14 24.0 1 166 Waiting: 0 11 21.6 0 165 Total: 191 361 80.8 345 716 Percentage of the requests served within a certain time (ms) 50% 345 66% 377 75% 408 80% 421 90% 468 95% 521 98% 578 99% 596 100% 716 (longest request)

  Read the article

• How to Monitor Network in Medium-Sized Company?

  - by Kyle Lowry

  I work at a medium sized company (100+ employees). An issue that has been cropping up is network performance, internet access in particular. We have about 70 or more computers, a mix of Mac OS X and Windows XP & 7 machines. We have several servers (Exchange server, PC file servers, MS SQL, Blackberry, FTP, Mac server, etc). There are four main switches, a SonicWall firewall, and probably a couple routers in the server room with a dozen or so more scattered around the building. The network structure has grown organically over a number of years; and, as far as I know, there really isn't a monitoring solution in place. When we experience network issues (slow connections, dropped packets, and so on), our general solution is to power cycle some hardware or go around to each employee and ask them if they are uploading/downloading any large files. This is really inefficient and time consuming, and it does not allow us to monitor the network, tackling potential problems proactively. I would like to find a solution that would allow me to monitor network usage company-wide in real time, with detail going down to the individual computer, ideally. Given the hodgepodge of equipment and operating systems, what would be the best way to set up some kind of monitoring solution? Hardware, software, restructuring our network architecture?

  Read the article

• Mail Server using Postfix

  - by unknown (google)

  I have currently set up my web application on Amazon EC2 server. As a well known fact sending email from EC2 has a problem. As a cheap and long lasting solution instead of using "authsmtp" is it possible to rent a server and use it as a Mail Server? I am currently looking for cheap hosting which will give me root access so that it can be configured and used as a relayhost. I am curently using Postfix as MTA. Has any one implemented this before? I am curious about its feasibility of this solution. I guess common requirements are: 1: Dedicated IP which is not black listed. 2: Open relay( open to my Server only) Any Tips for Header configurations to keep the mails out of spam folder. This is like exactly cloning authsmtp for personal use. Any suggestions for other Mail Server software instead of Postfix? Another problem is Reverse DNS for this server. Should PTR entry be present if a server is used as a relayhost?

  Read the article

• SRM 4 Test Fails with message for some VM : Error: A specified parameter was not correct.

  - by Setesh

  Here are my architecture : For the protected site 4 Host VSphere Enterprise Plus, each one with 2 HBAs FC connected to the switch fabric, connected to an EMC CX4-120 1 VCenter 1 SRM For the recovery site 2 Hosts Vsphere 4 1 Vcenter 1 SRM 1 CX-4-120 The CX4-120 is connected to the second CX4-120 with ISCSI and the MirrorView / Asynchronous. I synchronise for the time 6 Lun on a FC DAE, 2 on a S-ATA DAE I have allocated 30% of the amount synchronised LUN for the SNAPSHOT us, but I have allocated them only on my S-ATA II DAE. It does not make a problem, my snapshot are correctly active. All the installation is new (hardware and software), installed in January with the last files available in download. I have a strange problem, and it's random, sometimes when I run a test on my RP, some VMs have this error : Error: A specified parameter was not correct. I don't know where to look. Any help is appreciated... PS : I have checked on all the VMs, no Floppy disk or CD attached. PS2 : There is severals VMs with RDM and OCFS2 filesystems on it.

  Read the article

• Datastage 8.7 installs fine on Window7 without any errors but it can not launch localhost:9080 web console

  - by user265273

  When I launch the web console, I get page can not be displayed error. What I have tried so far: I have re-installed DS about 7 times, and each time, I get same errors. I added entries in etc/hosts file for local host and my host name. I have turned off firewall. My hardware/software setup. My host system is window8.1. My vmware workstation is 7. The guest os is windows 7 enterprise x64. I have installed 10g, and given dba role to public. I have installed VS 5, and ms visual c++ 2010 express. I have installed msxml. IE version is 10. Firewall is off. My internet works fine It passed all the DS requirement tests and install completed successfully. When I launch my vmware guest instance, I do get SQL5000c error upon boot which I have tried to ignore in some installs and in some, I used db2systray -clean command to get rid of it. But that has not helped solve the webconsole connect failure to my host. I have spent over 2 weeks exclusively on this issue and badly need some help.

  Read the article

• How can I take browser screenshots at a higher resolution than my browser supports?

  - by user53575

  I need to take a screenshot of a website as it would appear on a very high resolution monitor... say 16000x12800 pixels. My laptop's screen has a native resolution of 1280x800. Basically, I need to simulate having a monitor resolution much higher than my monitor and video card actually supports. I want the screenshot of the site to look pretty much how it does when you hit CTRL MINUS (zoom out) in Firefox repeatedly, but without any loss of pixels due to scaling. How can I do this? Is there some way to use virtual machine software to simulate a super-high-res display? If not, is there some way to open a browser window bigger than the screen, and then capture its contents as a PNG somehow? Anything else that might work? Here was an answer: http://superuser.com/questions/120266/how-can-i-take-browser-screenshots-at-a-higher-resolution-than-my-browser-support But it doesn't work. Firefox remains in the resolution of the physical screen. The window blinks and shrinks back to normal resolution. Please Help!!

  Read the article

• Why is my new PC so slow at startup?

  - by rumtscho

  Bought a new PC this weekend, and it works really good. Only I have one big problem: startup time. Its BIOS needs 62 sec to load, then from Grub start to pw entering screen it's another 26 sec. I think this is a lot, because my old PC needs 34 sec for BIOS and another 8 sec to pw screen. After I enter the pw, the desktop is usable with practically no delay on both. The new PC is a core i7-930, running a Lucid Lynx 64 bit from a Intel Postville SSD (no internal HDs). The old PC is a Pentium 4 celeron (forgot the clock speed) running a Lucid Lynx 32 bit from an ATA 100 hard drive. Neither PC is overclocked. The new one has boot sequence 1.DVD ROM, 2.SSD (connected over SATA in AHCI mode), 3. removable drive. The old one boots from 1. DVD ROM, 2. HDD, 3. Floppy. Neither has a second OS installed. The new one has less software installed than the old one (I think), but the boot time difference was noticeable even before I made any installs. As far as I know, just the SSD should be enough to make a noticeable difference in boot time. I thought that having a good mainboard on the new PC as opposed to the basic office model on the old one would also mean a faster loading BIOS. If these assumptions are right, I guess I must have misconfigured something in the BIOS of the new PC. How should I configure it for a fast boot? It has an ASUS P6X58D board with an AMI BIOS, if you need the BIOS revision number I could post that too.

  Read the article

• Upgrade to Q9550 or i7 920 on a budget?

  - by evan

  I'm planning to upgrade my computer and torn between maxing out the system I have or investing in the X58 architecture. I'm currently using a E6600 Core 2 Duo with 4GB of RAM (800mhz) on an Asus PK5-E motherboard which I built two years ago. My original plan was that one day I'd upgrade machine to 8GB (1066mhz, the max the PK5-E allows) and to the Core 2 QuadQ9550 to give the machine a good four years of life. However, that was before the i7 came out. I use my computer mainly for software development , which I do inside Virtual Machines, and the i7 seems ideal for that because it no longer is limited by the speed of the FSB? And when I looked into it, getting 8GB DDR3 RAM isn't much more expensive than the 8GB of DDR2 and the i7 920 is comparable in price to the Q9550, which doesn't make much sense to me? So the question is it worth swapping the motherboard out for around $250 and upgrading all three components or using that money on SSD or 10rpm drive for the existing system's OS/Apps/Virtual Machine drive? Or just put the $250 towards a completely new machine in a year or two? Would the i7 really give that much of boost compared to the Q9550 for what I'd be using it for? Thanks in advance for your input!!!

  Read the article

• What tools can I use to locate the IP of a machine on my network?

  - by user134918

  I am logged in to a remote Windows Server machine and am trying to attach it to a VPN for a LAN that I am also connected to locally from another Windows machine using Remotr Desktop. I can connect the remote machine to the VPN but when I do so, I lose my remote desktop connection. I am now in a situation where I know/think that the remote machine is on my LAN, but do not know what its current IP is and can therefor not connect to it again. I do not have any control over the infrastructure, all I have is a remote machine that I do control, and another machine that I also control that is connected to the same LAN as I'm trying to get the remote machine on using the existing VPN. What tools are available for Windows to allow me to locate the machine on my LAN again? I am imagining that there must be a tool that broadcasts the machines new IP using multicast, or tries to log in to a server component running somewhere with a know IP. Effectively, I am looking for some software that I can run on my remote machine, as well as my local machine, to allow me to discover the new IP address (on the LAN) assigned to the remote machine after connecting to the VPN.

  Read the article

• mail server checklist..

  - by Jeff

  currently we ran into some issues with our mail server setup. im preparing a list of actions that we should enforce and use in order to maintain a proper email solution within our company. we have around 80 exchange users, and send mass emails out almost on a monthly bases to 20,000 + customers each time.. the checklist i currently have: 1) mcafee mxlogic 'cloud' anti-spam functionality for incoming message. 2) antivirus on each computer in company 3) antivirus on exchange and DNS servers 4) setup SPF record 5) setup DKIM 6) setup domainkey 7) setup senderID 8) submit spf to microsoft, yahoo, etc. for 'whitelist' purposes. 9) configure size limits for messages in exchange to safe numbers 10) i have 2 outside IPs for my email server, incase one gets blacklisted, switch to the backup. 11) my internet site rests on a different ip than the mail server 12) all mass emails for company sent through 3rd party company (listtrak.com) 13) setup domain alias, media, enews, and bounce for the 3rd party mass mail software. 14) verify the setup using [email protected] 15) configure group policy and our opendns.org account to prevent unwanted actions and website viewing mass emails: 1) schedule them to send different amounts at different times (1,000 at 10am, 1,000 at 4pm, 1,000 10am next day).. 2) setup user prefences, decide what they want to receive ect. ( there interests) 3) send a more steady flow of email, maybe 100 a week with top new products instead of 20,000k every other month.. if anyone has suggestions or additions/subtractions to this checklist they are greatly appreciated. thank you

  Read the article

• How do I install Apache Portable Runtime?

  - by apache

  My Apache is installed by yum install apache And now I'm trying to install subversion server from source following instructions here. But when I try to configure,get an error: [root@vps303 subversion-1.6.9]# ./configure configure: Configuring Subversion 1.6.9 configure: creating config.nice checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes ... checking for APR... no configure: WARNING: APR not found The Apache Portable Runtime (APR) library cannot be found. Please install APR on this system and supply the appropriate --with-apr option to 'configure' or get it with SVN and put it in a subdirectory of this source: svn co \ http://svn.apache.org/repos/asf/apr/apr/branches/1.2.x \ apr Run that right here in the top level of the Subversion tree. Afterwards, run apr/buildconf in that subdirectory and then run configure again here. Whichever of the above you do, you probably need to do something similar for apr-util, either providing both --with-apr and --with-apr-util to 'configure', or getting both from SVN with: svn co \ http://svn.apache.org/repos/asf/apr/apr-util/branches/1.2.x \ apr-util configure: error: no suitable apr found How do I get around this problem? BTW,will both client and server software be installed by compiling from source?

  Read the article

• zsh : How to list directory content with tab?

  - by Philippe CM

  I just switched from BASH to ZSH and thing are pretty good, but: when I start typing cd /usr/share/s and hit TAB, this is what I get : $ cd /usr/share/sane/ sane/ skype/ ssl-cert/ screen/ smplayer/ strigi/ seed-gtk3/ snmp/ synaptic/ sgml/ software-properties/ system-config-printer/ sgml-base/ soprano/ sysv-rc/ sgml-data/ sounds/ simple-scan/ splashy/ And this is ok. If I then hit TAB again, I get $ cd /usr/share/screen/, the next candidate, witch is also OK. (BTW, how do I cycle back to the previous candidate? Sorry, on to my question) Now what if I want to see the contents of /usr/share/screen/ now ? You now, BASH-style? The cursor is at the end of the line, will I have to ctrl-a (or home), then del del (to erase cd) then ls then ENTER? That seems like a lot of typing. (And it - possibly unnecessarily - enters the command in the history) Would not there be a key (maybe modifier-TAB? but the obvious candidates are already taken by the desktop... I digress) that would tell zsh to stop cycling through /usr/share/ and instead, just list the content /usr/share/screen/ ?

  Read the article

• Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

  - by clem

  Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

  Read the article

• Despeckle line art

  - by Dour High Arch

  We have a number of line-art charts unfortunately saved as JPEGs. They are now riddled with distracting compression artifacts or "speckles". Is there any way of removing these? I do not have the original files and it will be very difficult to recreate them. I am running Windows 7 and tried Paint.Net; none of the filters help. Posterize washed out all the colors and leaves the speckles. Blur makes text unreadable. Noise Reduction wrecks antialiasing of curved lines, and perversely enhances the speckles, making them look like checkerboards. Yes, I have Googled for software to do this; there are many programs that advertise despeckling but, after my experience with Paint.Net, do not want to experiment with applications that show no before and after images. The only example I have seen that does what I want is from a Photoshop tutorial. I have dozens of files and the tutorial requires considerable manual fine-tuning. I would prefer to automate or batch-process this task. Commercial apps are fine, but I do not want to spend over $600 and learning a complex program for a single task.

  Read the article

• Where does Windows store MSI files for uninstallation?

  - by Nilzor

  I'm trying to figure out how Windows (XP through 7) is handling installation and uninstallation of MSI files. I have come up in situations where Windows Installer is unable to uninstall because it's missing the original MSI file, which leads me to believe that it stores a copy of all installed MSI packages somewhere. Where? I've had a couple of theories. It expectes it to reside in the same folder as it was installed from. The registry keys in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall does point to the original installation folder, and error messages when the MSI file is missing often point to this. Removing the MSI file from this folder does not hinder the uninstallation process though, so I've refused this theory. C:\Windows\Installer. This folder actually contains a bunch of seemingly randomly named MSI files. But this list is incomplete. I do find entries in the registry key mentioned in 1) which does not have an MSI copy in this folder. So how does this work? How is windows installer able to uninstall MSI-installed applications even though the MSI is not in 1) and not in 2)?

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network. [Solved]

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either the Win 7 desktop or the VM's; it always returns a destination host unreachable error. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• Is there a Mac utility that does low level drive integrity check and repair?

  - by Puzzled Late at Night

  The PGP Whole Disk Encryption for Mac OS X Quick Start User Guide version 10.0 contains the following remarks: PGP Corporation deliberately takes a conservative stance when encrypting drives, to prevent loss of data. It is not uncommon to encounter Cyclic Redundancy Check (CRC) errors while encrypting a hard disk. If PGP WDE encounters a hard drive with bad sectors, PGP WDE will, by default, pause the encryption process. This pause allows you to remedy the problem before continuing with the encryption process, thus avoiding potential disk corruption and lost data. To avoid disruption during encryption, PGP Corporation recommends that you start with a healthy disk by correcting any disk errors prior to encrypting. and As a best practice, before you attempt to use PGP WDE, use a third-party scan disk utility that has the ability to perform a low-level integrity check and repair any inconsistencies with the drive that could lead to CRC errors. These software applications can correct errors that would otherwise disrupt encryption. The PGP WDE Windows user guide suggests SpinRite or Norton Disk Doctor. What recourse do I have on the Mac?

  Read the article

• HDD dead forever???

  - by Roberto

  Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken, it couldn't be recognized by the BIOS. I have another of the same hd, so I exchanged the boards. I found out that there is a problem on its board since my good hd didn't work. But the broken hd doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hd is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hd but with the wrong size (2TB). I try to make it read the hd but it get an I/O error reading sector. It tries to read, the hd spins... So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do recover the files from it?

  Read the article

• Windows XP VM on VMWare ESXi 4.1 "pausing" / blocked occasionally

  - by FelixD

  We have an issue with Windows XP SP3 VMs on VMWare ESXi 4.1.0 (the free version): They sometimes seem to "pause" for several minutes. This happens rarely (maybe once a month per VM, at least noticed only that often), but still is an issue for us. It happens for three different but similar VMs on three pretty different hosts (different hardware). I have the feeling that the "pausing" is not actually the CPU blocking, but probably the harddisks, but not 100% sure. The servers have one IDE disk (C:) and one SCSI (D:) and it might be either of the two. I have seen scheduled tasks simply not starting for up to 9 minutes and then running normally again with normal speed. They were totally blocked. This is not a load issue, the VMWare hosts have average load and the VMs in question already have reserved CPU resources plus high priorities for CPU and disk. The Windows boxes run mainly MySQL, Tomcat, FileZilla server, Cygwin stuff, Java + R applications, VMWare client, Elusiva Terminal Server pro, Nagios client. Not sure if this might be related with any of that software (e.g. Elusiva). Trying to debug this, there was nothing visible in Windows Event log, other logs in C:\Windows, VMWare events etc. Unfortunately the vmware.log file ends with "Log throttled". We found that we ran into 2 VMWare bugs there: The VMWare client writes lots on bogus messages in the vmware.log, which we now disabled (log level error setting) plus the bug that VMWare does not unthrottle the log (at least so far despite VM reboots). I know there is not much guidance and that may also be the reason why I so far didn't find anything related on the web or on ServerFault, but maybe some of this rings a bell with someone? Or please direct me to what more info to post. I hope that the vmware.logs get unthrottled eventually (can't easily restart the hosts at the moment). Thanks for any input!

  Read the article

• How to decouple development server from Internet?

  - by intoxicated.roamer

  I am working in a small set-up where there are 4 developers (might grow to 6 or 8 in cuople of years). I want to set-up an environment in which developers get an internet access but can not share any data from the company on internet. I have thought of the following plan: Set-up a centralized git server (Debian). The server will have an internet access. A developer will only have git account on that server, and won't have any other account on it. Do not give internet access to developer's individual machine (Windows XP/Windows 7). Run a virtual machine (any multi-user OS) on the centralized server (the same one on which git is hosted). Developer will have an account on this virtual machine. He/she can access internet via this virtual machine. Any data-movement between this virtual machine and underlying server, as well as any of the developer's machine, is prohibited. All developers require USB port on their local machine, so that they can burn their code into a microcontroller. This port will be made available only to associated software that dumps the code in a microcontroller (MPLAB in current case). All other softwares will be prohibited from accessing the port. As more developers get added, providing internet support for them will become difficult with this plan as it will slow down the virtual machine running on the server. Can anyone suggest an alternative ? Are there any obvious flaws in the above plan ? Some key details of the server are as below: 1) OS:Debian 2) RAM: 8GB 3) CPU: Intel Xeon E3-1220v2 4C/4T

  Read the article

• How can I use apt-get to resolve package dependencies when there are multiple versions in the repository?

  - by user1165144

  I've package a-package.deb which depends on b-package.deb in version 1.0. Everything works fine. But now a b-package in version 1.1 gets added to the repository. I'd suspect that apt-get installs the a-package and version 1.0 of the b-package. What really happens is, that a-package won't get installed: # apt-get install a-package Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: a-package : Depends: b-package (= 1.0) but 1.1 is to be installed E: Unable to correct problems, you have held broken packages. Is there a workaround to fix the behavior? Is there other software to use, that can handle the dependencies as defined?

  Read the article

• Can anyone help me make my reverse proxy actually cache?

  - by Lenary

  Hi folks, I'm trying to configure a Reverse Caching Proxy but so far have had no luck. I would preferrably like to use apache (that will be all it will be used for), but am open to solutions using other software that can also run on Mac OS X 10.6 (I have also tried using Varnish and Squid, but with no more luck). We're running a system with about 80 mac mini clients that will be requesting lots of video from a server. To reduce load, we thought we could use Apache (which comes on the macs by default) to cache this video forever (or at least as long as possible) onto the macs' disks. I have managed to get a reverse proxy set up with apache using ProxyPass etc, but when i tried to add CacheEnable disk / to the configuration, nothing happened (i do have mod_disk_cache included). Can anyone help with my issue? The apache config file is here Thanks in advance Edit: So far I have been testing it with smaller text files, and it hasn't been caching properly. This suggests it is nothing to do with us actually downloading video, but actually to do with the cache configuration.

  Read the article

• Server periodically freezing - Help Stabilizing

  - by JonDog

  We run an asp.net/sql server data collection website with a hand full of clients dumping data in and running reports. We moved to a new server (specs below) and have had issues with it freezing and having to reboot it a dozen times over the pass six months. The hosting company has mentioned possible causes (listed below) but cant give a definite answer on what is going wrong. They have offered to reconfigure how ever I like. We have benefited from having a much faster system and really dont want to get rid of the ssd's unless they are the issue. Two possible setup changes that I've talked with them about are also listed below. Any suggestions on what maybe causing the freezing issue as well as suggestion on a new setup would be great. My main questions are: Do SSD generally have problems running the OS & SQL Server on the same RAID Array? and Are the new SSD's still unrefined enough to be running in a production environment? Thanks Current: Xeon Quad Core E3-1270 3.40 Ghz 16 GB DDR3-1333 ECC SDRAM First Hard Drive: 120GB Intel SSD Second Hard Drive: 120GB Intel SSD Third Hard Drive: 120GB Intel SSD Fourth Hard Drive: 120GB Intel SSD SAS 4 Port RAID Card Windows 2012 Standard Edition - 64 Bit MSSQL 2008 Web Edition Possible Causes: Running Sql Server & OS on same RAID Array OS Software Issues Using SSD's CPU Underpowered Not enough RAM Option 1 2x Xeon Quad Core E5-2603 1.80 GHz 16 GB DDR3-1333 ECC SDRAM 1 x 240GB Intel SSD - OS 3 x 1 TB SATA HDD (7200 RPM) - SQL Server SATA 4 Port RAID Card Windows 2012 Standard Edition - 64 Bit Option 2 Dell PowerEdge E3-1270v2 3.5GHz 4 Cores 16 GB DDR3-1600 UDIMM 4 x 128 GB Samsung 840 Pro SSD Add-in H200 (SAS/SATA Controller), 4 Hard Drives - RAID 10 Windows 2012 Standard Edition - 64 Bit

  Read the article

• What needs to be considered when setting up for Linux Development? [closed]

  - by user123586

  I want to set up a box for Linux development. I have a working linux install with the usual toolchain and an IDE. I'm looking for advice on how to approach structuring accounts and folders for development. As the Perl folks say "There's always more than one way to do it." Left to my own devices, I'll come up with several unproductive ways of doing it before figuring out what an experienced Linux programmer would think obvious. I'm not looking for instructions to follow for a specific set of tools or a specific software package. Instead, I'm looking for insight into what decisions need to be made and how to make them, with understanding of the advantages and disadvantages of each individual choice. These are some of the questions that come up: Where to put sources Where to put built object files and libraries where to install what to set in environment variables what compiler flags matter and how do you manage them across several types of builds what configuration entries to make in an IDE how to manage libraries to support multiple environments how to handle different build versions such as debug vs release, or cross platform builds If you are an experienced Linux developer, the answers to these questions may seem trivial and obvious. I'd like to learn to make decisions about these questions that result in as little manual configuration as possible, given some existing sources, a particular IDE, or no IDE at all, a paticular set of development libraries etc. At this point you're probably thinking: Can you be more specific? Sure. But remember that I'm trying to learn how to think about this stuff, not just follow a recipie for a specific set of results. Example: Setup a project that uses CMake for some of its components, autogen.sh followed by configure for others and just configure for a few more: debug builds without an IDE debug builds in NetBeans debug builds in Eclipse debug build in Visual Studio all of the above with release builds for Linux, Mac and Windows. So... **What are your thoughts on an approach that works for all four? Do you have any advice on what to read?**

  Read the article

< Previous Page | 707 708 709 710 711 712 713 714 715 716 717 718  | Next Page >