Search Results

Search found 59196 results on 2368 pages for 'no time'.

Page 712/2368 | < Previous Page | 708 709 710 711 712 713 714 715 716 717 718 719  | Next Page >

• Proper approach to debug PC startup problems (POST)

  - by saurabhj

  My CPU was heating up to around 65 deg C and last time this had happened (about a year ago), I got thermal paste put between the CPU and heat sink and this managed to get it down to about 45 - 50 degrees. This time, I got some thermal paste and put it myself. However, my PC is not showing the POST display and not starting up. This is what happens LEDs light up HDDs spin Mouse is getting power All fans including the processor fan starts No display on monitor No diagnostic beep sounds (no sounds at all) What I have tried Removing everything including RAM, HDD, PCI cards, AGP card Boot up machine No changes from first state. What steps can I take to figure out where the problem lies? Note (might be important) When I removed the heat sink, the processor came out with it (it was stuck to it inspite of the processor latch on) Had to pry it separate with a screw-driver. Configuration Pentium 4, 2.8 Ghz with HT (very old, I know) Original Intel Mobo with onboard sound and graphics (GB series) 2x512 Mb DDR-RAM 2 SATA disks (320 Gigs / 250 gigs) DVD Writer Creative Sound Card Network card Any help would be appreciated. Thanks!

  Read the article

• GIT and Django Projects

  - by Garfonzo

  I have two servers, a Dev server and a Production server. The Production server runs a live Django site, while the Dev server has a copy of the Django project. I use the Dev server to work on the Django site, make improvements, fix bugs, etc. Once I am satisfied with how the Dev version is working, I move the whole Django directory from the Dev server and replace the same directory on the Production server. The two servers are not on the same LAN so the process is not straight forward. There are a few issues with this that I am having so far. Moving the whole directory is laborious and time consuming If I only change a few files, it is even move tedious to replace a few files than the whole directory since the project is getting fairly large and I worry that I'll miss something I often run into permission issues after I've moved things It's super inefficient, and, due to lack of time, I haven't bothered figuring out a new method. Now it's just getting out of hand and i need to address the situation. I am thinking I need to move to a GIT repository for this process. But my question is how would I set this all up? Do I host the repository on the Production server, pull from the Dev server, do work, then commit? Then I would pull from the Production server (same server the repo is hosted on) to run the current working version? Do I host the repo on the Dev Server, pulling from the same server to do work on the repo, then pull a working version onto the Production server? Should I be hosting the repo on a different server than the Production server and the Dev server (a third server)? Are there any special considerations with Django and repos that I need to worry about? Thanks for the help :)

  Read the article

• VMWare Server modifying files related to paused VMs, is this expected?

  - by David Spillett

  While refreshing the backup of a VM used for testing, I experienced the following warning from tar: tar: /VMsR0/cli_noddyco_test/VM2K8_32_web.vmem: file changed as we read it The VMs in question were paused at the time. My first though was that I'd mixed up the machines and was trying to backup something that was still actively running. To be sure I unpaused and properly shut down the VM, and the vmem files that tar reported changing vanished as I would expect. Is it normal for VMWare Server to touch or alter files for paused VMs like this, or is there likely something amiss with our setup? If this is expected behaviour, is just touching the vmem file (and so altering the last modification date without actually changing content)? If it is normal for files relating to paused VMs to be updated I shall have to revise our backup procedures to make sure the VMs are fully shut down fully rather than just pausing them (this isn't a problem, but it seems strange and I'd prefer to understand what VMWare is doing and why instead of just dismissing it as "one of those things" and working around it). For further detail: the host in question is VMWare Server version 2.0.2 running on 64-bit Debian/Lenny, and that VM did not have a snapshots at the time. We have backed up paused VMs this way in the past with no such warnings from tar.

  Read the article

• Vim move cursor one character in insert mode without arrow keys

  - by bolov

  This might seem a little too overboard, but I switched to vim and I so happy about the workflow now. I try to discipline myself not to use the arrow keys, as keeping the hands on the alfa-keys all the time is such a big thing when writing. So when I need to navigate I get out of insert mode, move in normal mode and get back in insert mode. There is an exception where this is actually more disrupting: I use clang complete with snippets and super tab which is great. Except every time I get a function auto completed after I fill in the parameters I am left with the cursor before ) so to continue I have to move the cursor one character to the right. As you can imagine this happens very often. The only options I have (as far as I know) are : Escla or ?, and I am not happy about neither of them. The first one makes me hit 3 keys for just a simple 1 character cursor move, the second one makes me move my hand to the arrow keys. A third option would be to map CTRL-L or smth to ?. So what is the best way of doing this? //snippets (clang complete + supertab): foo($`param1`, $`param2`) //after completion: foo(var1, var2|) ^ ^ | | I am here | Need to be here | denotes cursor position

  Read the article

• PHP Not Automatically Updating With ?reload=1

  - by user32007

  A friend built a ranking system on his site and I am trying to host in on mine via wordpress and godaddy. It updates for him but when I load it to my site, it works for 6 hours, but as soon as the reload is supposed to occur, it errors and I get a 500 timeout error. His page is at: jeremynoeljohnson .com/yakezieclub My page is currently at http://sweatingthebigstuff.com/yakezieclub but when you ?reload=1 it will give the error. Any idea why this might be happening? Any settings that I might need to change? Here is the top of the index.php file. I'm not sure which part of any of it is messing up. I literally uploaded the same code as him. Here's the reload part: $cachefile = "rankings.html"; $daycachefile = "rankings_history.xml"; $cachetime = (60 * 60) * 6; // every 6 hours, the cache refreshes $daycachetime = (60 * 60) * 24; // every 24 hours, the history will be written to - or whenever the page is requested after 24 hours has passed $writenewdata = false; if (!empty($_GET['reload'])) { if ($_GET['reload']== 1) { $cachetime = 1; } } if (!empty($_GET['reloadhistory'])) { if ($_GET['reloadhistory'] == 1) { $daycachetime = 1; $cachetime = 1; } } if (file_exists($daycachefile) && (time() - $daycachetime < filemtime($daycachefile))) { // Do nothing } else { $writenewdata = true; $cachetime = 1; } // Serve from the cache if it is younger than $cachetime if (file_exists($cachefile) && (time() - $cachetime < filemtime($cachefile))) { include($cachefile); echo ""; exit; } ob_start(); // start the output buffer ?

  Read the article

• Should I be able to Windows Phone 8 emulator running with this AMD config

  - by pete

  I have just bought a new system as follows * AMD A4-5300 Trinity 3.4GHz * Gigabyte GA-F2A55M-DS2 Motherboard I checked and the A4-5300 supports Virtualisation. I have run the SLAT checking tool and it says that my machine supports SLAT. Been into the BIOS and ensures that SVN is enabled. I have also run the coreinfo tool that indicates that SVN is not valid fort the machine nor is NPT.. not sure why this conflicts with the true BIOS setting (I checked with GIGABYTE and seems that NPT and NX are not options that can be set in the BIOS) But.. when I run the emulator I it hangs - I can see some activity in Hyper-V manager, but it doesnt get very far and no meaningfull error messages. Been working the plethora of suggestions to get around this, but so far, nothing has worked. My question is should this setup allow the WP8 emulator to run. I am positive the CPU supports virtualisation, but are there issues with the motherboard here? I have spent a huge amount of time on this so far....am I wasting my time with the current configuration, or should it work? thanks

  Read the article

• How to Monitor Network in Medium-Sized Company?

  - by Kyle Lowry

  I work at a medium sized company (100+ employees). An issue that has been cropping up is network performance, internet access in particular. We have about 70 or more computers, a mix of Mac OS X and Windows XP & 7 machines. We have several servers (Exchange server, PC file servers, MS SQL, Blackberry, FTP, Mac server, etc). There are four main switches, a SonicWall firewall, and probably a couple routers in the server room with a dozen or so more scattered around the building. The network structure has grown organically over a number of years; and, as far as I know, there really isn't a monitoring solution in place. When we experience network issues (slow connections, dropped packets, and so on), our general solution is to power cycle some hardware or go around to each employee and ask them if they are uploading/downloading any large files. This is really inefficient and time consuming, and it does not allow us to monitor the network, tackling potential problems proactively. I would like to find a solution that would allow me to monitor network usage company-wide in real time, with detail going down to the individual computer, ideally. Given the hodgepodge of equipment and operating systems, what would be the best way to set up some kind of monitoring solution? Hardware, software, restructuring our network architecture?

  Read the article

• Amazon EC2 - Free memory

  - by Damo

  We have an amazon ec2 small instance running and over the past few days we noticed that the memory is going down and down. On the small instance, we are running apache and tomcat6 Tomcat is started with the following JVM parameters -Xms32m -Xmx128m -XX:PermSize=128m -XX:MaxPermSize=256m We use nagios to monitor stuff like updates to apply, free disk space and memory. Everything else is behaving as expected but our memory is going down all the time. Our app receives approx half a million hits a day When I shutdown apache and tomcat, and ran free -m, we had only 594mb of memory free out out of the 1.7gb of memory. Not much else is running on the small instance and when running the top command I cannot see where the memory is going. The app we run on tomcat is a grails webapp. Could there be a possibility that there is a memory leak within our application? I read online and folks say that a small amazon instance is perfect for running apach and tomcat. I found a few posts online that showed how to setup apache and tomcat to limit the memory usage and I have already performed those steps. The memory is not being used up as quick but the memory is still decreasing over time. We have other amazone ec2 small instances running grails apps and the memory is fairly standard on those nodes. But they would not be receiving as much traffic Just to add, when I run the top command on the problem server, I cannot see where all the memory is being used Any help with this is greatly appreciated The output of free -m when run on my server is as follows total used free shared buffers cached Mem: 1657 1380 277 0 158 773 -/+ buffers/cache: 447 1209 Swap: 895 0 895 In your opinion, does this look ok? At what stage would the OS give back memory, would it wait to the memory reaches 0% or is this OS dependent?

  Read the article

• Router(s) Issue: DNS quries sporadically fail with multiple computers hooked in

  - by bob-the-destroyer

  Basically, after anywhere from 5-60 minutes, DNS queries fail for a few minutes, then slowly begin to resolve correctly. Then the cycle repeats. This occurs only when more than one computer is on the network. All computers on the network experiences the same sporadic DNS outage at the same time. Wireless or wired, Linux or Windows, fresh OS install or old, browser or ping, same symptoms. Duplicated on 3 routers (not chained together, mind you) and 3 ISP's and 3 separate locations over the past several months. The only common theme is a single 5-yo WIN XP laptop which has been in use on the network throughout all this. There also may be anywhere between 1 - 10 devices hooked up wired or wirelessly at a time. The only reprieve I have from this torture is by using any VPN to an outside source - always smooth sailing. I typically set up any router to a) use WPA2/etc security; b) MAC whitelist; c) UPNP OFF (if available); d) always update firmware when available; e) obtain DNS from ISP automatically; f) set the router to act as DHCP server for the internal network. Adjusting channels has no effect. Any ideas?

  Read the article

• Logging Remote Desktop to Servers via Logon Script or GPO or What?

  - by Nate Bross

  The objective here is to start a simple .NET application I've written which captures some environment variables (time, username, computername, etc) upon login. This .NET application subscribes to the Windows "User logout" event. Upon launch, the application captures the above variables, and creates a record in my database, upon logout (which I'm capturing) I update another field in the same record, with the logout time. The above is working exactly as I would like, when I launch the binary, it makes its initial log entry, then waits for the logout event and updates the same record. Restrictions, the .NET binary should be able to live on a share point (\server\share\myapp\v1) so I can update the application to (\server\share\myapp\v2) and simply update the GPO/Logon script. My initial thought was to use the \domaincontroller\sysvol\ directory to store the binary and then update all user accounts to include a call to my application. Can you see any flaws in this approach? My question is this: First, is there anything wrong with my idea above? Second, if so, what is the best way (through group policy or otherwise) to ensure this application launches whenever a session is started on a server?

  Read the article

• How to disable my laptop's defective keyboard?

  - by Kolink

  I have an Alienware M17x R2, and after a couple years of use I started having problems with the keyboard: Intermittently, and without warning or apparent cause (even if I'm not touching the computer), the S key (and more recently the D key) will start firing incessant signals until I hit the offending key. I've been using a USB keyboard, which is conveniently exactly the right size to fit over the built-in keyboard without touching any buttons. However, even as I type the defective keyboard will fire its stream of signals. I have contacted Dell about this, twice in fact. The first time, I was just bluntly told that they don't ship replacement keyboards. The second time I was told that they did, but they were out of stock and they would contact me when they were in stock again. They haven't contacted me since. I can't seem to work out which device to disable in the device manager. Here's a screenshot of what I have: None of the keyboard devices have "Disable" in their context menus, only "Uninstall"... so you'll understand if I'm hesitant to try anything myself. Any advice on how to fix this?

  Read the article

• Problems reviving old pc including graphics card issue.

  - by Mick

  I have a PC that seemed to have died years ago that I am trying to revive. It has a dual core athlon processor and a gigabyte motherboard. It had two dual output graphics cards, and I have long since forgotten which output would print out the diagnostic information as the PC starts up. Also I suspect that the resolution set on all the monitors was probably higher than my current single monitor is capable of displaying. The motherboard also has a built in graphics card, so I thought it may be simplest to remove both the graphics cards and plug my monitor into the onboard graphics just while I get things going. Does that seem sensible? Now the other problem: The PC has two hard drives. I have no idea which one is the primary one it is attempting to boot from. When I power up, the fan comes on and I hear some chuga-chuga-pause chuga-chuga-pause repeat indefinitely. I'm not sure which device is making the noise. There are no-beeps at any time. I see nothing on the screen at any time, not even for a second. Any suggestions? EDIT: If T start up the PC without the power connected to the CDrom there is no chuga-chugan noise.

  Read the article

• Ubuntu server 10.04 disconnects after short periods of inactivity on my site

  - by user57019

  I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

  Read the article

• Good Hosting Providers With Zend Framework Support [closed]

  - by manyxcxi

  I currently use ixwebhosting for my hosting services. They're cheap and work (most of the time). The databases are horribly slow, the servers are horribly slow, and their support (though usually prompt) is tough to deal with. That being said, they're cheap, I've got like 20 domains hosted in my account, none of them are high volume, and they work JUST good enough- until today. This isn't meant to be a condemnation of ixwh though. Their prices are very low for what they do offer and most things work just fine, most of the time. I need to be able to host web apps written with Zend Framework in a fairly easy fashion. The server performance can't be worse than what I've already had (a pretty low hurdle to clear), and I don't want to spend $30/mo. These are not money making websites- they're projects. My requirements are PHP 5.3, ZF support, MySQL databases, multiple domains- not much. Who should I look at, and who should I look out for?

  Read the article

• Audit file removal (auditctl)

  - by user1513039

  For some reason, some script or program is removing a pid file for the service on the linux server (centos5.4 / 2.6.18-308.4.1.el5xen). I suspect a faulty cron script, but manual investigation did not lead me to it. And i still want to track it down. Have been using auditctl rule: auditctl -w /var/run/some_service.pid -p w Which helped me to see something, but not quite exactly what i wanted: type=PATH msg=audit(11/12/2013 09:07:43.199:432577) : item=1 name=/var/run/some_service.pid inode=12419227 dev=fd:00 mode=file,644 ouid=root ogid=root rdev=00:00 type=SYSCALL msg=audit(11/12/2013 09:07:43.199:432577) : arch=x86_64 syscall=unlink success=yes exit=0 a0=7fff7dd46dd0 a1=1 a2=2 a3=127feb90 items=2 ppid=3454 pid=6227 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=pts0 ses=38138 comm=rm exe=/bin/rm key=(null) Problem here is that i see ppid of the script that removed the file, but at the analysis time the (p)pids are already invalid as probably scripts/programs have been shutdown. Imagine a cron script deleting the file. So i need some way to expand/add audit rule(s) to be able to trace the parents of the /bin/rm at the time of removal. I have been thinking to add some rule to monitor all process creation, something like: auditctl -a task,always But this happen to be very resource intensive. So i need help or advice how to combine these rules, or how to expand any of the rules to help track the script/program. Thanks.

  Read the article

• Giving the root user priority to maintain Debian (while server collapsing under heavy load)

  - by Saix

  Is there any way to setup Debian to prioritize any or specific root's activity before every other? For instance, several times per year something gets wrong (usually man's fault by overstressing apache/mysql) and system gets unresponsive under heavy load like 200 (8-core cpu). I know there are limits for php scripts to run then kill, but that's not the way because this limit has to be at least 45 minutes long. The problem is, until I'm able to login via SSH and let apache/mysql restart under this server stress, it nearly hits these 45 minutes anyway. Also hardware restart causing usually to run fsck at boot time on all harddrives since it's usually pretty long the box haven't been restarted. I was told it's really not good idea disabling fsck but then again, it takes more then hour to complete. What is the fastest way to restart apache/mysql? Is there any way to give ssh users or root user higher priority so the logging in and completing these restarts (rather stops though) commands wouldn't take so long? One comes to my mind.. use NICE for apache/mysql but no way. I can't risk limiting those two vital apps 24/7 or could I? I'm a little bit scared if any other system process wouldn't slow the pages down too much. Any backup process, swap (if any) etc. There is pretty heavy PHP framework with 20k visits a day, so it needs every hw/sw resource available. I can't throttle it the whole time, just in certain points when system gets unresponsive, so I could maintain it.

  Read the article

• Reading log files from web application

  - by Egorinsk

  Hi! I want to write a small PHP application for monitoring logs on a Debian server, including syslog logs and Apache/PHP messages. The problem here is that Apache user (www-data) has no access to /var/log directory. What would be the best way to grant an access to logs for PHP application? Let's assume that log files can be really large, like hundreds of megabytes. I have some ideas: Write a shell script that would be run via sudo and tail last 512 Kb of log into a separate file that can be read by application - that's ineffective, because of forking a new process and having to read data twice Add www-data to adm group (that can read logs) - that's insecure Start a PHP process via cron every minute to read logs — that's not very good, because it doesn't allow real-time monitoring. Also, this script will be started even when I don't read logs, and consume CPU time (server is in the cloud, and I'll have to pay for it) Create a hardlink for all log files with lowered permissions - I guess, that won't work because logrotate could recreate log files and they'll change inode number. Start a separate nginx/Apache server under privileged user that may read logs. Maybe anyone got a better solution?

  Read the article

• Folder name in sidebar is changed, how to get it back?

  - by otakustay

  My OSX is Simplified Chinese, so the user folders in finder's sidebar is like this: AirDrop ???? ?? ?? ?? ?? ?? ?? These stand for AirDrop, Applications, Desktop, Documents, Downloads, Movies, Musics and Pictures. However, now with an accident, my "Downloads" folders in sidebar is changed to its original english name, and I don't why, so my sidebar is now look like: AirDrop ???? ?? ?? Downloads ?? ?? ?? I know do symbol link to these folders would cause such case but I cannot find any symbol links to my ~/Downloads folder. So is there any way to get the Chinese name back? it looks so weired and dirty. I have a time machine backup 3 days ago, but I have quite a lot modifications to my user folder these 3 days, so time machine may not be a good choice.

  Read the article

• Removed Old Domain Trust. Now Progress (9.1D) can't open DB File

  - by RLH

  My company has an old server, running Progress 9.1D on a Windows 2000 VM, which was used by our company OS (Vantage 6 by Epicor.) Vantage was our primary OS for a very long time. About 2 years ago, we migrated to a larger, corporate OS and we cancelled our service contract with Epicor. Yesterday, we removed an AD trust between the corporate domain and our old AD domain we used in the days of Vantage. After restarting the virtual server, I have been able to start the ProService for 9.1D Windows service, however, I can not get Vantage to start back up. When I run the application, I get the error in the message listed below. Transcript: ** Could not connect to server for database [progress db file], errno 0. (1432) How can I fix this? FYI, I haven't had to work with Progress in years and even then I wouldn't have considered myself a "novice"-- I'm even less knowledgeable than that title would suggest. Vantage had a lot of internal tools and I recall that Epicor support managed to prevent .pf scripts from being executed. If there was a Progress specific patch that needed to be applied, you had to do it within the Vantage software OR they had to remote into the machine to fix this. I may not be able to run a .pf script but I do know that I can log into the console-based server application. (Yes, I can't even recall which utility that was called. It is sad.) It's been a long time and I never had to digg into Progress that much. Please help and feel free to ask questions. If you need more info, I'll update this post.

  Read the article

• Can installing Linux or Grub make all of my operating systems slow?

  - by Geore Shg

  I installed Linux Mint 64-bit recently but it freezes up all the time. Not only that, but Grub wouldn't detect Windows. I thought it was just an issue with Linux Mint so I booted into Ubuntu - however that froze up as well. I downloaded Fedora to replace Linux Mint with, but that also freezes up. I finally gave up trying to repair Grub, burning a supergrub grub2 disk and using that to boot into Windows. Windows now freezes up as well. I installed a new copy of Windows on a different drive but to no avail. Right before all this started my computer was running very smoothly. I am wondering if the installation of Linux Mint, the reinstallation of Grub, or me messing with the BIOS (when I was attempting to repair Grub) could have done something drastic enough that everything is slow now? I realize that computers get gradually slower over time, but this was in no way gradual and it happened directly after the installation of Linux Mint. If so, what should I do?

  Read the article

• Why am I getting programs stuck in log_wait_commit under Linux?

  - by staticsan

  There is something subtly wrong with my Linux install that I just can't locate. It is Ubuntu Lucid Lynx (10.04) 64-bit. Hardware is a Dell Optiplex 960: Intel Core 2 Quad CPU, 8Gb of RAM, 2x 300Gb HDDs. /home is ext2 on one disk and everything else is on the other (/ is also ext3). I have VirtualBox running a 64-bit Vista image for Outlook calendaring, but the heavyweight apps are IntelliJ, NetBeans, MySQL and Opera. Opera also loads my mail (IMAP) of which there is over 10,000 messages. The problem is that Opera stalls for a few seconds from time-to-time. Watching the process list shows it's in log_wait_commit which means (as far as I have figured out) the filesystem is holding things up. Sometimes I can make this happen by doing a subversion update, but usually it happens for no reason I can see. It usually happens to Opera, but I've seen NetBeans go under, too. It doesn't make the app crash - it's just completely unresponsive for a few seconds. Googling has not helped. The closest I got was to remove the sync attribute in the file system. This achieved nothing. On the advice of a Linux guru friend, I lowered /proc/sys/vm/dirty_writeback_centisecs to 300, but that didn't do anything, either. And it was all he could think of. What is going on and can I fix it? (And how?)

  Read the article

• Imported Hyper-V VM hangs

  - by BParker

  I have a pair of Hyper-V servers (Server 2008 R2 + Hyper-V role). I have duplicated one VM (exported from the first Hyper-V server to the Second) which seems to keep hanging. The VM is running XP SP3, and has the Virtual Additions installed. The first version runs fine, cpu normally around 0%-2% when idle and responds happily. The second version runs very poorly, and keeps running at an idle of around 8% cpu. I have checked the VM with Process Explorer, and the Idle process is (as expected) taking nearly all the cpu time, but what it's not using doesn't seem to show up in any other process. For example at one point idle dipped to 73%, but i could only account for anoth 4.5% in other processes. After some time (around 1-2 days) the VM seems to become so unresponsive, the only way to resurect it is to power-off the VM and reboot (shutdown via the Hyper- V console of via the VM seems to be impossible). Does anyone have any suggestions on how to trace the source of the problem? Thanks

  Read the article

• Connections to IIS sometimes get stuck in CLOSE_WAIT state

  - by randomhuman

  Our application includes an ASP.Net web service that only needs to deal with a handful of clients. As such, the 10 incoming connection limit of Windows XP Pro is generally not a problem. However, on one particular server, connections are occasionally becoming stuck in the CLOSE_WAIT state. These connections build up over time and eventually new client connections are refused because the maximum number of connections are used up. From my googling it sounds like a failure of the webservice to properly close the connection can cause this problem, but as it works just fine on hundreds of other Windows XP pro machines I can't see it being a bug in our code. It also ran fine on the affected machine until some shenanigans on the part of the end user (I think they set about deleting duplicate files in order to reduce their disk usage, but they did not exactly come clean about it). What could the user have changed to introduce this problem? Is there any way I can force connections that are in CLOSE_WAIT to time out rather than letting them hang around? I have seen suggestions to reduce TcpTimedWaitDelay, but that only relates to the TIME_WAIT state, and changing it did not have any effect.

  Read the article

• thought about shared storage (NFS, Lustre) [closed]

  - by user134880

  Possible Duplicate: Can you help me with my capacity planning? Now I habe small cluster with total of 8 nodes. 6 of them are computing nodes (apache and vmware) and 2 nodes are for storage. 2 storage nodes are identical. Each storage server is linux box with 8 x 1Tb WD RE4 in soft raid 10. 1st box is master and 2nd is slave. Data is mirrored with DRDB. We export NFSv4 shares to Apache (for document root) and iSCSI to Vmware. Now all is working pretty good and stable. But it will be soon time to upgrade our system. I have been thinking of Lustre. Does some one has any real experience with Lustre or NFS medium clusters? Will it be good idea just to upgrade server and change hdd's to 3Tb ? With NFS we will always have only 2 servers to maintain (one primary and one slave). Thanks. QUESTIONS: 1) Does some one used Lustre? In production? I have seen a lot of info about how it is hard to setup Lustre because you need to compile own kernel and patches. It's answers from newbies. Is there some one who has used Lustre for some period of time? 2) About disk upgrades - it's only description of strategy. I'm not asking if it is enough 3Tb or not. I just ask if it is right just to replace hdds instead of adding new server (like with Lustre) Thanks again.

  Read the article

• Windows 7 delayed file delete

  - by GregoryM

  I'm stuck with a pretty rare problem that happens on Windows 7 OS only. Every time I'm deleting the file with *.exe extension through explorer, the file doesn't get deleted immediately. I'm forced to wait for around one-two minutes before the system will delete the file. The main problem is that I cannot develop in such situation, because every time I build my solution, the old executable gets 'deleted', but is still there. So the new one cannot be created by Visual Studio. This problem breaks the Steam update progress and a few other installers functionality too. Fresh installed Win7 doesn't have this kind of trouble, so I guess this must be some bad registry entries or some services. Browsing the internet for solutions I found only this: http://www.sevenforums.com/software/72091-several-minute-delay-when-deleting-any-exe-file.html. But the solution the author found is not working (change the userName :)). Is there any ideas how to find what causes this to happen? BTW: when I place the file into Trash bin, no delay occurs. When I delete file with Total Commander - no delay too. Tech details: Windows 7 x64 Ultimate.

  Read the article

< Previous Page | 708 709 710 711 712 713 714 715 716 717 718 719  | Next Page >