Search Results

Search found 22167 results on 887 pages for 'message listener'.

Page 714/887 | < Previous Page | 710 711 712 713 714 715 716 717 718 719 720 721  | Next Page >

  • Can't access apache from outsite my local network

    - by valter
    UPDATED: Now, when I type my external ip like xxx.xxx.xxx.xxx:8079, i can access xampp defaults page. But the strange is that when someone else from outside my network, try to access it using the same ip, it doesnt work. I Think it should, because its the external ip. I'm getting crazy. I have tried for hours to access xampp defaults page from outside my local network. My ISP blocks port 80 and 8080. So I changed apache to listen to port 8079 Listen 8079 My local computer ip is 10.1.1.2 I can access the webserver, from any computer on my local network when I type http://10.1.1.2:8079 I also oppended the port 8079 on my modem, as the image shows bellow. (I think i did it right) When apache is running on my computer, if I test the port 8079 at http://canyouseeme.org/ i get the message "Success: I can see your service on xxx.xxx.xxx.xxx on port (8079) Your ISP is not blocking port 8079" If apache is not running I get "Error: I could not see your service on xxx.xxx.xxx.xxx on port (8079) Reason: Connection refused". So, it's clear that the port 8079 is oppened. But when I type xxx.xxx.xxx.xxx:8079 on google chrome for example, I get Oops! Google Chrome could not connect to xxx.xxx.xxx.xxx:8079 What can I do to solve this, to allow apache to server the pages? I don't know what else I shoud configure. Please, help me. Thanks.

    Read the article

  • Lenovo Thinkpad T430 not booting from HDD if there is a USB modem connected

    - by user93353
    I have a T430 Levono Thinkpad running Win7. I use a ZTE USB modem (something like this) for my internet connection. I usually keep the modem plugged into the USB drive even when the laptop is shutdown or hibernating. This worked fine on my earlier laptops. But with the Lenovo, my laptop doesn't boot if the modem is in the USB drive. It shows the initial character based screen where it gives the Thinkpad message & BIOS details and then waits. If I pull out the modem, it goes ahead. I have disabled USB as a boot option in my BIOS settings, but even then this happens sometimes (but not all the times). Likewise while resuming from hibernation. The USB modem also has drivers & ISP connection client which getting installed the first time you use it on any machine. I have used multiple laptops (HP, DELL, Acer, Gateway) but never faced this problem before. I have friends who use other Thinkpad models but haven't faced this issue. Any resolutions, workarounds for this?

    Read the article

  • Folder with files shows as empty

    - by ProfKaos
    Last night I create a new project in Visual Studio 2010, in the folder c:\development\hobby\devices. When I navigate to that folder in a new instance of Windows Explorer, I get the 'This folder is empty.' message in the files pane. If I then, from within Visual Studio, issue the "Open containing folder command", explorer opens to the folder c:\development\hobby\devices\LoopBack, where loopback is a project under the main folder. If I paste that path into another new instance of explorer, explorer correctly opens c:\development\hobby\devices. How is this possible? SOLVED: This is what comes of typing paths instead of selecting them. Some elementary detective work yielded the following interesting results: C:\>dir dev*. Volume in drive C is OS Volume Serial Number is E4B4-0563 Directory of C:\ 2010/11/28 09:20 PM <DIR> Development 2010/12/01 08:57 PM <DIR> Develpment 2010/11/02 06:31 PM <DIR> DevTools 0 File(s) 0 bytes 3 Dir(s) 63 965 368 320 bytes free Where my disappearing project was in the badly spelt one.

    Read the article

  • cannot connect to my nginx server from remote machine

    - by margincall
    I thought that it's iptables problem.. but it seems not. I really have no idea about this situation. I'm getting a server hosting(CentOS). I installed Nginx + Django and nginx uses 8080 port. A domain is connected to the server. When I executed "wget [domain]:8080/[app name]/" in the server, it worked. Of course, "wget 127.0.0.1:8080/[app name]/" has no problem. (wget [server ip]:8080/[app name]/, either) However, from other computers, connecting was failed. (message says, no route) I checked my firewall setting. I excuted these commands. iptables -I INPUT -p tcp --dport 8080 -j ACCEPT iptables -I OUTPUT -p tcp --sport 8080 -j ACCEPT iptables -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT /etc/init.d/iptables restart I don't really understand all options of commands and I think there were useless commands, but I just tried all googled iptables settings. But still I cannot connect to my server. What should I check, first? I don't know this is important, but add to this post. On 80 port, an apache server is running. It works fine, I can connect to apache from other computers. There is DB connecting issue, (PHP to MySQL) but I think that it is just PHP coding bug. please excuse my low-level English. I'm not native English speaker.. but I tried to explane well as far as possible. Thank you for reading this question.

    Read the article

  • Designing a persistent asynchronous TCP protocol

    - by dogglebones
    I have got a collection of web sites that need to send time-sensitive messages to host machines all over my metro area, each on its own generally dynamic IP. Until now, I have been doing this the way of the script kiddie: Each host machine runs an (s)FTP server, or an HTTP(s) server, and correspondingly has a certain port opened up by its gateway. Each host machine runs a program that watches a certain folder and automatically opens or prints or exec()s when a new file of a given extension shows up. Dynamic IP addresses are accommodated using a dynamic DNS service. Each web site does cURL or fsockopen or whatever and communicates directly with its recipient as-needed. This approach has been suprisingly reliable, however obvious issues have come up and the situation needs to be addressed. As stated, these messages are time-sensitive and failures need to be detected within minutes of submission by end-users. What I'm doing is building a messaging protocol. It will run on a machine and connection in my control. As far as the service is concerned, there is no distinction between web site and host machine -- there is only one device sending a message to another device. So that's where I'm at right now. I've got a skeleton server and a skeleton client. They can negotiate high-quality authentication and encryption. The (TCP) connection is persistent and asynchronous, and can handle delimited (i.e., read until \r\n or whatever) as well as length-prefixed (i.e., read exactly n bytes) messages. Unless somebody gives me a better idea, I think I'll handle messages as byte arrays. So I'm looking for suggestions on how to model the protocol itself -- at the application level. I'll mostly be transferring XML and DLM type files, as well as control messages for things like "handshake" and "is so-and-so online?" and so forth. Is there anything really stupid in my train of thought? Or anything I should read about before I get started? Stuff like that -- please and thanks.

    Read the article

  • Jabber client for windows 7

    - by Anders
    I am looking for a jabber client with some specific functions. I have spent 1½ day looking for one and it is getting tiresome. Clients that I have been using, that have what I need, but I am not interesting for a reason in are: Pidgin, does not show complete messages in their popups. Miranda IM, I have a constant disconnect issue that does not seem to be resolved in my case. What I need are: Popups A popup that shows broadcasts to users. A popup that show when my username is typed in a conference chat. I need to be able to view the full message in the popup. No configuration of a theme to make this enabled, or if there is a working theme for it already. Preferable placement is on the top right of the screen. Able to 'popup' when running full screen applications, much like games. Conferences Easy access to bookmarked conferences. I do not want to go through submenus to rejoin a disconnected or closed conference. If I close the conference window I want to be connected to the conference until I exit the client. Tabbed interface. Configuration Sober configurations, options are great but there is a limit and the above needs to be availble in the options in a understandable manner. What I wish for: MSN Not needed! If it is avaible then it is a big plus. Facebook Not needed! If it is avaible then it is a big plus. Conferences/chats Not needed! Eyecandy is always nice.

    Read the article

  • (Some) security perms in WinXP corrupted (shows GUID instead of username)

    - by Andy
    I've been using my Win XP machine (part of a domain) over the holiday period, so until yesterday it hadn't rebooted for about five days. I used it yesterday perfectly fine and shut it down. When I switched it on this morning the majority (but not all) of my shortcut links in the Quick Launch toolbar showed as generic file icons. If you open the folder and get properties on one of the failing shortcuts it says ''Target type: This is not a valid shortcut''. Then in Outlook I noticed my signature wasn't showing (I checked my sent folder and the sig was ok yesterday). Checking the signature folder, I can't see the security tab on any of the sig files, and I have an access denied message on trying to open them. I can see the security tab on the signature folder itself, just none of the contents. If I try and use the parent folder's security tab and ''Replace permission entries on all child objects with entries shown here that apply to child objects'' it appears to work fine, but makes no actual difference. I logged in as administrator and saw that the owner of the files showed up as a GUID (clearly should've been my account in its place). Any ideas what might have made that happen? So far I haven't heard any similar complaints from anyone else at the office...

    Read the article

  • Make call with alternate provider if NOANSWER

    - by adaptive
    I have two voip providers, one free an the other paid. The free provider only allows local calls to certain area codes, so I need to fall back to the the paid provider if a call fails. At the moment, I have the following context in my extensions.conf file: [globals] ; freephoneline.ca PRIMARY_PROVIDER=fpl ; voip.ms SECONDARY_PROVIDER=voipms [local] exten => _NXXNXXXXXX,1,Set(CALLERID(name)=${OUTGOING_NAME}) exten => _NXXNXXXXXX,n,Dial(SIP/${EXTEN}@${PRIMARY_PROVIDER}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${OUTGOING_NUMBER}) exten => _NXXNXXXXXX,n,Dial(SIP/1${EXTEN}@${SECONDARY_PROVIDER}) exten => _NXXNXXXXXX,n,Hangup() I checked the logs and noticed that the free provider responds with NOANSWER if a call is not allowed (Even though it plays a message). What I want is to: Try calling the ${PRIMARY_PROVIDER} first. If NOANSWER is returned by provider (not that the callee did not answer), then call with ${SECONDARY_PROVIDER} How can I modify my dial plan to get the desired results? EDIT : The primary provider is freephoneline.ca, and I'm using asterisk v1.8.2.3-2

    Read the article

  • Can't connect to wi-fi hotspot in Ubuntu 11.10

    - by ht3t
    I'm new to Ubuntu. I'm having a wireless network problem in Ubuntu 11.10. I made a hotspot using Connectify from a computer which is running Windows 7. I can access it in Windows 7 but not in Ubuntu 11.10. Every time I access it,I get a message "disconnected". I'm using msi fx 400 notebook with Intel Centrino wireless -N 1000 wireless card. Ubuntu version is 11.10 with KDE desktop. $ sudo lshw -c network [sudo] password for ht3t: *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: wlan0 version: 00 serial: 00:26:c7:56:b8:f0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:44 memory:e7400000-e7401fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 40:61:86:b6:b1:a2 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw IP=192.168.21.107 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:9000(size=256) memory:e6004000-e6004fff memory:e6000000-e6003fff I can't do anything without internet connection. How can I fix this?

    Read the article

  • Windows Server don't connect to network share

    - by user104775
    Windows Server don't connect to network share. Network share is work. Ping Blockquote Pinging 109.123.146.223 with 32 bytes of data: Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Reply from 109.123.146.223: bytes=32 time<1ms TTL=63 Ping statistics for 109.123.146.223: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms net view \shareaddress Blockquote System error 53 has occurred. The network path was not found. When network share was connected, I was got a error message: Blockquote \ "Mapped disk letter" refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location Network share mounted via Group Policy. Any ideas?

    Read the article

  • Debian on HP ProLiant server hangs (disk i/o is my guess)

    - by Martin
    I installed Debian (2.6.32-5-amd64) on my HP ProLiant MicroServer (purchased recently.) I also added 3 2tb hd in zfs. I've experienced several server froze. Sometimes it showed Soft lockup CUP stuck for 61s! Today I experienced a different problem (I think) and the message looked like this [431336.200002] Call Trace: [431336.200002] [<ffffffff812fcc7c>] ? _write_lock+0xe/0xf [431336.200002] [<ffffffff810d7a86>] ? __vmalloc_node+0x99/0xe2 : : and (in different screen) [431354.222318] Node 0 DMA32 free: 2064kB min:5520kB low:69900kB high:8280kB active_anon:181648kB inactive_anon:61728kB active_file:313152kB inactive_file:832456kB unevictable: 0kB isolated(anon): 0kB isolated(file):0kB present:1922596kB mlocked:0kB dirty:72kB writeback:0kB mapped:25620kB shmem:344kB slab_reclaimable:34460kB slab_unreclaimable:31400kB kernel_stack:2288kB pagetables:7556kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [431354.222431] lowmem_reserve[]: 0 0 0 0 : : Is this a hardware problem? What tools/methods can I find out the source of the problem? I've used Debian for years but never had problem like this.

    Read the article

  • Problems restricting access using Apache

    - by Tola Odejayi
    I've set up XAMPP on a Windows 7 machine, and I want to restrict access to the htdocs folder to only requests from the local machine. C:\Xampp\htdocs is the web root folder. I have the following in my apache/conf/httpd.conf file: <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> <Directory "C:/Xampp/htdocs"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All order deny,allow deny from all allow from 127.0.0.1 allow from localhost </Directory> All my .htaccess files are blank. But when I navigate to the web root folder via a browser, I get the following message: Access forbidden! You don't have permission to access the requested directory. There is either no index document or the directory is read-protected. I tried adding the IP restrictions to the <Directory>...</Directory>, but it made no difference. What am I doing wrong here?

    Read the article

  • Can you explain how to understand what the 'iwconfig' command displays in Ubuntu-9.04?

    - by Shawn
    I'm having trouble making my wireless connection work, and I realized I don't really know how to use the tools I have, in this case, the iwconfig command in Ubuntu-9.04. Here is what I get: ***iwconfig*** - lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Network" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=20 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 vboxnet0 no wireless extensions. pan0 no wireless extensions. "Network" is the name of my wireless network, btw. But what does this all mean? How can this information help me aquire a working wireless connection? When I try associating a key using sudo iwconfig wlan0 key s:my_key I get the following error message: Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument. I do have the right key though, so what's the problem?

    Read the article

  • My server is taking too long to respond when I connect to it outside the local network [closed]

    - by Buzu
    I have my local server online most of the time because it is easy for clients to access a url and see how their project is coming along. They can see updates in real time. However, I got a message from one of my clients saying that the server was not responding. I have a hosts file, and in that file I have my server's address pointed to the local ip. This is because some problem with the ftp. Due to this setup, I had not noticed that the server was not accessible from outside the local network. The address is http://imbuzu.dyndns.info SSH works fine, I can connect from my windows machine to the server, but HTTP does not. The server is taking too long to respond. Looking at the logs, I see that the last incoming connection to the server from outside the network is this: 77.242.153.180 - - [04/Dec/2012:12:11:01 -0800] "\xce\x89\x8d\x85b\ro" 400 317 "-" "-" I'm going to restart the server, but I doubt that will have any effect on it. --EDIT-- I restarted the server, and it did not help. Also, I pinged the server and it seems to be resolving correctly.

    Read the article

  • Java games applet not connecting to Yahoo

    - by Steve
    Hi. I am trying to play a Y! game which use a java applet. The applet displays the message: Alert. Unable to connect to server. One of four things could have caused this: 1) You are behind a firewall. 2) You are not connected to the internet. 3) The games server is down. 4) You have a stale page in your cache. I have added an exception to the Windows firewall for java.exe. I am obviously connected to the Internet okay. The games server is not down when I am at home. I doubt it is down when I am at work. I have never successfully loaded this page before, so I doubt I have a stale page in cache. Could it be the corporate firewall? Nothing else in my web browser has been blocked before. Maybe the java applet connects on a different port to the browser. What should I test?

    Read the article

  • Web shortcuts (.url) not working on Windows 7

    - by jpbochi
    I'm experiencing several symptoms, but I believe they are all related to web link files not working. First, I can't create we link files anymore. When I try New Shortcut and put an URL, I get the following error message: Second, existent shortcuts are not working. The default context menu action (or double-click) is Print, which simply prints an empty page. If I try to see its properties, there's no URL there. Third, IE bookmarks are also not working. One difference is that the default action is Open, IE does nothing when I click it. Adding a new bookmark only creates one more dead link file. I'm almost sure this problem occurred after I tried to install IE 7 on Windows 7. Unfortunately, it didn't work because the OS seems to be bound to IE 8. I already tried to reinstall/repair IE 8, but it made no difference. Does anyone experienced a similar problem? I need a working solution, but I welcome any reasonable suggestion.

    Read the article

  • 3 Monitor PCI-e Graphics card (without tremendous pain)?

    - by N Rahl
    As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. The exact message is: The current settings cannot be applied. Possible issues may include: - Display(s) cannot be enabled. - Setting(s) cannot be applied due to insufficient video memory. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment.

    Read the article

  • Apache forwarding without redirecting (application won't follow redirects)

    - by DrewVS
    Recently we had to move /task to /public/task, and I'd like to configure Apache to redirect accordingly. However, using mod_rewrite, though it works in the browser, seems to break applications making api calls to the above location. What happens is the application returns a page with the message saying the page was moved, but the app doesn't follow the redirect. So, is there a way to simply forward any traffic to /task to /public/task without 'redirecting', i.e, returning a redirect status code? EDIT: Here's a little more information. I've found a simple test to clarify what I'm trying to fix. Here is the URL path that needs forwarding: https://mydomain.com/task Needs to go to: https://mydomain.com/public/task If I use curl against the original domain, it just returns a redirect page notice. If I add the -L flag, which tells curl to follow redirects, it then follows the redirect successfully. I assume something very similar is happening in the application (which I don't have access to) that makes calls to the /task URL path. Since I cannot modify the application to make it follow redirects properly, I'm looking for a solution I can implement in Apache.

    Read the article

  • phpMyadmin issue on cpanel

    - by user1149244
    I logged in into our cpanel to view phpMyAdmin but I can't open it. It give me this error message: Warning: session_write_close() [function.session-write-close]: write failed: No space left on device (28) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: session_write_close() [function.session-write-close]: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/cpanel/userhomes/cpanelphpmyadmin/sessions) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php:42) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 99 I contacted the support to assist me with. They just told me that the server is unmanaged. They told me to delete the free the partition but I don't know how to do it. I'm noob on that matter. The /var/log/btmp is over 8GB as they said. I want to delete that file. How would I do this? I need to free the space of the partition. I need some steps on how to do it and also steps on how to delete the /var/log/btmp. I have been googling around but I haven't found anything.

    Read the article

  • Subversion: Secure connection truncated

    - by Nick
    Hi, I'm trying to set-up a subversion server with apache2/webdav access. I've created the repository and configure Apache according to the official book, and I can see the repository in a webbrowser. The browser shows: conf/ db/ hooks/ locks/ Although clicking any of those links gives an empty xml document like: <D:error> <C:error/> <m:human-readable errcode="2"> Could not open the requested SVN filesystem </m:human-readable> </D:error> I've never used subversion before so I assume this is correct? Anyway, when I try to connect via a command line client, it asks for my password, I give it, then I get the (useless) error message: svn: OPTIONS of 'https://svn.mysite.com': Could not read status line: Secure connection truncated (https://svn.mysite.com) The command I'm using is: svn checkout https://svn.mysite.com/ svn.mysite.com Subversion was installed using Ubuntu's package manager. It's version 1.6.6 on Ubuntu 10.04. My Virtualhost Cofiguration: <VirtualHost 123.123.12.12:443> ServerAdmin [email protected] ServerName svn.mysite.com <Location /> DAV svn SVNParentPath /var/svn/repos SVNListParentPath On AuthType Basic AuthName "Subversion Repository" AuthUserFile /etc/subversion/passwd Require valid-user </Location> # Setup The SSL Certificate Paths SSLEngine On SSLCertificateFile /etc/ssl/certs/mysite.com.crt SSLCertificateKeyFile /etc/ssl/private/dmysite.com.key </VirtualHost>

    Read the article

  • Can't connect to FTP server from a specific location

    - by wv_pip
    Last week while uploading website files to our server via FTP, the transfer failed. Ever since then, I haven't been able to connect to the server from work. I can connect just fine from home, or by using an FTP app on my cell phone as long as I'm on the cell network. I can't access the server from any machine on my work network. It's not a credential issue, either. The error message that I always get says that a connection cannot be established, and I am never prompted for my credentials. I have changed absolutely nothing on our domain controller or our firewall/router. I've contacted our ISP (who hosts the website/FTP server) and they can't find anything wrong on their end. They insist that it must be something here at the office that is blocking access. I've also tested access to other FTP servers (ea.com, nvidia.com, etc.) so I know that port 21 is not being blocked. I'm totally stumped. Any help is much appreciated. EDIT: wireshark info here: http://www.cloudshark.org/captures/85a118ae9296?filter=ip.dst%3D%3D66.118.64.208

    Read the article

  • Cannot browse Visual SVN Repositories

    - by user1783560
    I went through Unable to browse repository after setting visual SVN Server and tried to implement the answer suggested but even the IP address is not solving my problem. I have 1) Turned off firewall 2) Set the directory C:\Program Files (x86)\VisualSVN Server security rights to "full control" for all groups including "Network service" group. 3) Set the directory D:\Repositories security rights to "full control" for most groups including "Network service" group. 4) Tried switching between secure and non-secure connection option in visual svn server manager. 5) Tried different with port numbers. Including 443 (with https) and 80 (http). Also tried giving random ports with/without https. Using computer name/ IP address in the url doesn't help. Windows network diagnostics - Troubleshooting report has following message for me. Security policy settings or firewall settings on this computer might be blocking the connection. = Detected Can someone guide me please? I have spent more than two weeks on this now without any solution. Thanks in advance! I appreciate your responses.

    Read the article

  • Recover deleted folder form bookmarks bar?

    - by OverTheRainbow
    I googled for this, but didn't find an answer. I removed a folder in Google Chrome's Bookmarks bar. Chrome says nothing when doing this, and I assumed it wouldn't actually delete the data from the Bookmarks manager, just the folder in the Bookmarks bar. Turns out I was wrong, and now I lost hundred's of URLs. I closed and restarted Chrome since then, so data is apparently no longer on disk. Since Google Sync is on by default, it says I have "536 bookmarks", I installed Chrome on another computer, logged on to Google... but the folder is still gone. I can't believe Chrome doesn't prompt the user with an obvious message for something that important. Is there somehow a way to recover a folder removed from the Bookmarks bar? Thank you. Edit: Amazingly, Chrome doesn't 1) provide a way to remove an item from the Bookmarks bar without also deleting it from the Bookmarks list, and 2) doesn't even warn the user of the consequences when doing so! The only way to recover data is: if you haven't closed the browser yet, make a backup of the Bookmarks file, close the browser, replace the now-leaner Bookmarks file with the previous version, and restart Chrome if you have closed it, recover the file from your backup. You did backup that file, right? ;-)

    Read the article

  • Big and reaaaally strange problem with a web server (host InMotion Hosting)

    - by altar
    Hi. I have a terrible problem that I have tried to solve since three days ago: I browse my own web site and after a while I cannot access the web site. AT ALL! I can only see a 501 error message: "Method Not Implemented. GET to / not supported. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request." Once I get that error the site is totally and permanently inaccessible in that browser!! Reboot, browser restarts, clear cache, clear all history and cookies, etc., are not working. I have reproduced it in 4 different computers. Three computers are in one city, the 4th is in another city. Two different ISP's also. One computer is Linux, the others are on Windows (XP and 2000). Browsers are FF 3 to FF3.5 and IE 8. The error is ALMOST reproducible on demand (for me at least). It appears when I browse the forum under certain circumstances. I don't know which are these circumstances, but if I browse it long enough (10 sec to 5 minutes) it eventually appears. Just to make it clear, once the error appears (while browsing the forum) then the whole web site become inaccessible, not only the forum! My host is not willing to help because they say they cannot reproduce the error. I sent screenoshots but they don't care. NEWS Reseting browser's settings from the 'Tools-Clear private data' din't worked. However! When I have cleared the same settings (more exaclty) cookies from the special menu that appears when you right click website's icon, it worked. So it was something related to a cookie BUT it manifests in all browsers (FF, IE, Opera). So it cannot be a browser related problem.

    Read the article

  • Messages don’t always appear in Mail.app

    - by MikeHoss
    I asked this question on serverfault, but it was correctly suggested that superuser is better -- and I agree: My wife and I share a Mac and use different accounts. We both use Apple's standard Mail.app. We can also get to our email accounts via SquirrelMail that our webhost provides. Both SquirrelMail and Mail.app are connecting via IMAP. My wife was the first to notice that not all messages were getting to the Mail.app. She would check the Mac (our main machine) and then a little while later check mail from another machine via SquirrelMail and see messages there that should have been on the Mac. She would go back and those messages would never show up. Lately, I have been seeing the same thing, though less often. I can't reproduce it, or just look at a message to see if they haven't been moved over. I've looked in Junk, etc. and the Mac simply never sees those messages via IMAP. Does anyone have a guess to something I could poke around at?

    Read the article

< Previous Page | 710 711 712 713 714 715 716 717 718 719 720 721  | Next Page >