Search Results

Search found 67158 results on 2687 pages for 'work life'.

Page 717/2687 | < Previous Page | 713 714 715 716 717 718 719 720 721 722 723 724  | Next Page >

• Starting my own server - basic recommendations and questions [closed]

  - by Ilia Rostovtsev

  Possible Duplicate: Can you help me with my capacity planning? I'm planning to start my own high-performance server and then use collocation services for keeping it up and running. I'm planning to USE it for processing videos and keeping big video site up! (using FFMpeg, MENcoder and etc.) I just need recommendations on whether listed hardware is good enough and will work together well and fast enough. Do I need anything else (missed something). I remember about CPU coolers though! ;) I'm planning to use SSD drives so please tell me if it's going to work just as regular HDDs (but much faster)? Are they going to be used as RAID (is this possible for SSDs)? Here is what I would like to get: Intel ® Server System SR1600URHSR (Urbanna) or Intel® Server System SR1695WBAC 2 x Intel Xeon X5650 4 x 16Gb DDR-III 1333MHz Kingston ECC Reg (KVR13R9D4/16) 3 x (or maybe 4x) 480Gb SSD Intel 520 Series (SSDSC2CW480A3K5) Which server system would be better? Is listed hardware new/good enough and worth buying it at the moment? Should I probably take a look at something slightly more expensive but more up to date and powerful, may be? After all as software I would like to use CentOS 6 64 bit + WHM/CPanel? Any other suggestions on maybe cheaper and same/more powerful server management system but WHM? What most important points to keep in mind when starting/maintaining your own server?

  Read the article

• How to route public static IP to a virtual machine on a vmware ESXi host?

  - by Kevin Southworth

  I have 5 static IPs from my ISP (Comcast) and I have a physical machine with VMware ESXi 4.0 on it that is hosting multiple virtual machines. Right now I am just using the default vmware virtual network (vswitch0) with DHCP from the Comcast IP Gateway Router and everything is working fine. Each virtual machine can access the internet, etc. One of my virtual machines is a webserver (Windows Server 2008) and I want to assign it to 1 of my 5 static IPs so it's accessible from the public internet, while leaving the other VMs on the internal LAN still using DHCP. If I just plug my laptop directly into the Comcast IP Gateway (it has 4 ports on the back) and assign my laptop a Static IP using the windows networking dialogs, then I can hit my laptop from the public internet and it works great. However, if I try to do the same steps to set a static IP config on my Windows Server 2008 VM, it does not work. The VM cannot access the internet (open Firefox and try to visit google.com), and I cannnot see the VM from the public internet either. I'm assuming I'm missing something in the ESXi config somewhere, but I'm pretty new to ESXi and I'm not sure how to configure it to work this way.

  Read the article

• Access 2007: How can I make this EXPRESSION less complex?

  - by Mike

  Access is telling me that my new expression is to complex. It used to work when we had 10 service levels, but now we have 19! Great! My expression is checking the COST of our services in the [PriceCharged] field and then assigning the appropriate HOURS [Servicelevel] when I perform a calculation to work out how much REVENUE each colleague has made when working for a client. The [EstimatedTime] field stores the actual hours each colleague has worked. [EstimatedTime]/[ServiceLevel]*[PriceCharged] Great. Below is the breakdown of my COST to HOURS expression. I've put them on different lines to make it easier to read - please do not be put off by the length of this post, it's all the same info in the end. Many thanks,Mike ServiceLevel: IIf([pricecharged]=100(COST),6(HOURS), IIf([pricecharged]=200 Or [pricecharged]=210,12.5, IIf([pricecharged]=300,19, IIf([pricecharged]=400 Or [pricecharged]=410,25, IIf([pricecharged]=500,31, IIf([pricecharged]=600,37.5, IIf([pricecharged]=700,43, IIf([pricecharged]=800 Or [pricecharged]=810,50, IIf([pricecharged]=900,56, IIf([pricecharged]=1000,62.5, IIf([pricecharged]=1100,69, IIf([pricecharged]=1200 Or [pricecharged]=1210,75, IIf([pricecharged]=1300 Or [pricecharged]=1310,100, IIf([pricecharged]=1400,125, IIf([pricecharged]=1500,150, IIf([pricecharged]=1600,175, IIf([pricecharged]=1700,200, IIf([pricecharged]=1800,225, IIf([pricecharged]=1900,250,0)))))))))))))))))))

  Read the article

• Apache ScriptAlias and access error?

  - by Parhs

  First of all after much pain i figured out how to make it work in Apache 2.4 windowz. Here is my configuration that seems to work successfully for git clone and push and everything. Problem First of all my configuration works. There is a "Require all denied" at / directory. I want only git functionality and nothing else. Example Request from a git client 192.168.100.252 - - [07/Oct/2012:04:44:51 +0300] "GET /git/simple/info/refs?service=git-upload-pack HTTP/1.1" 200 264` Error caused by that Request [Sun Oct 07 04:44:51.903334 2012] [authz_core:error] [pid 6988:tid 956] [client 192.168.100.252:13493] AH01630: client denied by server configuration: C:/git-server/web/simple There isnt any error at gitclient everything works fine but i get this at error log. Is there any solution for this error to not appear?I worry about log size. <VirtualHost *:80> DocumentRoot "C:\git-server\web" ServerName git.****censored**** DirectoryIndex index.php SetEnv GIT_PROJECT_ROOT c:/git-server/repositories SetEnv GIT_HTTP_EXPORT_ALL SetEnv REMOTE_USER=$REDIRECT_REMOTE_USER ScriptAlias /git/ "C:/Program Files (x86)/Git/libexec/git-core/git-http-backend.exe/" <LocationMatch "^/.*/git-receive-pack$"> Options +ExecCGI AuthType Basic AuthName intranet AuthUserFile "C:/git-server/config/users" Require valid-user </LocationMatch> <Directory /> Options All Require all denied </Directory> <Directory "C:\Program Files (x86)\Git\libexec\git-core"> Options +ExecCGI Options All Require all granted </Directory> </VirtualHost>

  Read the article

• Cannot Resolve Host Or Access Website Through Router

  - by Boris_yo

  This is weird. I am on Windows XP with Edimax BR 6204Wg. I have 3 devices - 2 laptops and 1 smartphone. 1st laptop and smartphone are connected through WiFi to router and 2nd laptop is connected through LAN to router. Before firmware upgrade i did not try to access website but after firmware upgrade to latest version: http://www.edimax.eu/en/support_detail.php?pd_id=11&pl1_id=3#02 i had problems resolving host, pinging, tracerting and accessing website. Sometimes ping and tracert work but i cannot access website and sometimes i can access website but ping and tracert do not work. Weird? I downgraded to previous version and no changes. If i can no longer access that website through Internet Explorer, i can access it in Firefox. I tried deleting cookies, clearing cache and that seem not make difference. Switching LAN port did not make difference. When i disconnect router and connect laptop through LAN to internet modem, everything is normal. I tried resetting router, resetting to factory default settings and all did not help. At the moment i can access website on laptop connected through LAN from Firefox and Internet Explorer, but on my smartphone i can access website only with Opera but not with built-in browser and Skyfire. UPDATE: I just could only access with Internet Explorer but not with other browsers on my PC. Minutes later i could access with all browsers. But on smartphone i could only access with Opera and not with other browsers. I am confused. I also determined that sometimes i can access and sometimes can't. What is also weird is that when ping and tracert cannot resolve host, i still am able to access website.

  Read the article

• Rewriting html links with modproxyperlhtml

  - by Juancho

  I'm trying to setup an Apache reverse proxy using mod_proxy and modproxyperlhtml. This is my scenario: Domain for the proxy: http : // www.myserver.com/ Destination server (the one behind the proxy): http : // myserver.foo.com/myapp/ I'm sorry that I have to space the URL but serverfault doesn't allow me to post more than two links as "spam protection mechanism" (ridiculous on a site where you ask questions about servers and it's really probable to post more than two times the same URL's to explain your question). The idea is to map http : // www.myserver.com/ to http : // myserver.foo.com/myapp/ . Note that the path on the proxy is / and on the destination server is /myapp/. All of the examples I can find on the net (like the one on the official documentation of modproxyperlhtml) are the other way around, ie. path on the proxy /myapp/ and path on the destination server /. This is my current config that doesn't work: ProxyPass / http : // myserver.foo.com/myapp/ ProxyPassReverse / http : // myserver.foo.com/myapp/ PerlInputFilterHandler Apache2::ModProxyPerlHtml PerlOutputFilterHandler Apache2::ModProxyPerlHtml SetHandler perl-script PerlSetVar ProxyHTMLVerbose "On" LogLevel Info <Location / > # ProxyPassReverse /myapp/ PerlAddVar ProxyHTMLURLMap "/myapp/ /" PerlAddVar ProxyHTMLURLMap "http : // myserver.foo.com /" </Location> The examples use the ProxyPassReverse inside the Location directive, but on my case doesn't work, only when outside. With this configuration the links aren't being replaced as they should be, my guess is that the location isn't being found, thus the rewrite rules aren't being applied. The error log only shows that it uncompresses the content, searches it but doesn't find anything: [Tue Nov 13 0842:05 2012] [warn] [ModProxyPerlHtml] Uncompressing text/html; charset=UTF-8, Content-Encoding: gzip\n [Tue Nov 13 08:42:05 2012] [warn] [ModProxyPerlHtml] Content-type 'text/html; charset=UTF-8' match: /(text\\/javascript|text\\/html|text\\/css|text\\/xml|application\\/.*javascript|application\\/.*xml)/is\n [Tue Nov 13 08:42:05 2012] [warn] [ModProxyPerlHtml] Compressing output as Content-Encoding: gzip\n [Tue Nov 13 08:42:06 2012] [warn] [ModProxyPerlHtml] Content-type 'text/html; charset=UTF-8' match: /(text\\/javascript|text\\/html|text\\/css|text\\/xml|application\\/.*javascript|application\\/.*xml)/is\n What could be wrong ?

  Read the article

• Password Protect XML-RPC

  - by Terence Eden

  I have a service running on a server which I want to access via XML-RPC. I've installed all the necessary bits. Within /etc/apache2/httpd.conf I have the single line SCGIMount /RPC2 127.0.0.1:5000 I can run xmlrpc commands from my server - and any server which connects to /RPC2. What I want to do is password protect the directory to stop unauthorised usage. Within /etc/apache2/httpd.conf I've added <Location /RPC2> AuthName "Private" AuthType Basic AuthBasicProvider file AuthUserFile /home/me/myhtpasswd Require user me </Location> Trying to access /RPC2 brings up the "Authorization Required" box and it accepts my username and password. However, xmlrpc now doesn't work! If I run xmlrpc localhost some_command on my server, I get the error Failed. Call failed. HTTP response code is 401, not 200. (XML-RPC fault code -504) Is there any way I can password protect my /RPC2 directory and have xmlrpc commands work?

  Read the article

• SSL wildcard certificates and trailing 'www'

  - by user173326

  I've got a wildcard SSL certificate for *.mydomain.com. I'm using nginx, and redirecting all traffic for http to https, and also rewriting the URLs without a trailing www (if there is one). So it has, 1) http://subdomain.mydomain.com ---> https://subdomain.mydomain.com 2) http://www.subdomain.mydomain.com ---> https://subdomain.mydomain.com 3) https://www.subdomain.mydomain.com ---> https://subdomain.mydomain.com 4) https://subdomain.mydomain.com ---> https://subdomain.mydomain.com However, since my cert is for *.mydomain.com, case 3 gets an SSL error in chrome ('This is probably not the site that you are looking for!'), but if you click through it gets redirected and all is well. I understand why, since the initial connection is for https with a www (2 levels of subdomains), which doesn't match what is on the wildcard certificate. I thought a solution would be to get an additional cert for *.*.mydomain.com to cover www.*.mydomain.com. But it seems like that won't work. I spoke to agents from namecheap and comodo, and both said *.*.mydomain.com was not possible. I also came across this: https://support.quovadisglobal.com/KB/a60/will-ssl-work-with-multilevel-wildcards.aspx Is there a solution to this? To be able to cover www.*.mydomain.com?

  Read the article

• ports only available from the outside network

  - by ChrisJ

  This is a counter-intuitive problem for me. I have a new Win 2003 server on a static IP address w.x.y.z. Tomcat 7, PostgreSQL 9.1, and Subversion are installed. All of it appears to be working fine from the server itself. We can also access the Tomcat manager, web applications, and run "svn ls svn://w.x.y.z/" from outside our network. However, when I try from another machine in the office, phpPgAdmin and svn cannot establish connections with the server. http://w.x.y.z:5432/phppgadmin cannot connect. The svn command from above returns: svn: E730061: Unable to connect to a repository at URL 'svn://w.x.y.z/' svn: E730061: Can't connect to host 'w.x.y.z': No connection could be made because the target machine actively refused it. Tomcat manager and the other web apps we have deployed work fine. Netstat -a from the server shows this: Proto Local Address Foreign Address State TCP SERVERNAME:3690 SERVERNAME:0 LISTENING TCP SERVERNAME:5432 SERVERNAME:0 LISTENING Windows Firewall was off, but just in case I also tried to enable it and open ports 3690 (svn) and 5432 (postgres). No change. I don't have access to the router/switch because it just doesn't work that way in Port-au-Prince and our sysadmin is on R&R. Is there anything that might be causing the problem from the server side?

  Read the article

• Enable re-attached mouse/keyboard via ssh?!

  - by aidan

  I had Ubuntu 9.10 x64 Desktop installed on a nettop I have (that I normally run headless), and yesterday I decided to take the plunge and update to 10.04. So, I plugged in a screen and usb mouse/keyboard, booted up and set to work. It was 1am, and it was telling me it had 3hrs left to install all the new packages, so I unplugged the screen and usb mouse/keyboard, left the box running, and went to bed. This evening, I plugged it all back in again to check progress. It's asking if I want to remove obsolete packages. I do, but neither the mouse nor keyboard work! I can access the box via SSH like I normally do; is there any way I can re-enable the keyboard from there? I'm reluctant to restart the box (via ssh) mid-way through such a complicated upgrade. Thanks for any help! lsusb (with wireless mouse/keyboard receiver unplugged): Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lsusb (with wireless mouse/keyboard receiver attached): Bus 004 Device 005: ID 045e:005f Microsoft Corp. Wireless MultiMedia Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• How to reinstall Windows Boot Manager on EFI partition

  - by joaocandre

  So I've been trying to install Ubuntu on a second HDD on my desktop, which has W8 installed on a SSD (UEFI-only boot). Thing is, during Ubuntu installation I made the mistake of choosing to install the bootloader (GRUB) to the first disk (the SSD), and after install I could not boot into W8 (the entries in GRUB didn't work). Following these instructions, I managed to be able to get "Windows Boot Manager" back, however I lost GRUB in the process, and got a duplicate "Windows Boot Manager" entry in BIOS, along with the "Ubuntu" entry, which then I used to boot into Ubuntu. Later, I decided to reinstall Ubuntu, and formatted the HDD from within windows, however, the entries in BIOS stayed the same, and, while I had the HDD connected to the motherboard, I could not boot into an Ubuntu Live USB (in order to reinstall Ubuntu). I made another mistake by updating the BIOS, which cleared all of the EFI boot entries in BIOS, and, right now, I get an error when boot from the SSD: grub: device not found (...) So it seems that grub is still installed in the EFI partition of the SSD, and since I don't have the WBM entry in BIOS anymore, I cannot even boot into Windows, and the previous instructions don't work anymore. Is there another way to reset W8 EFI partition to the default?

  Read the article

• Pair programming with tmux and Vagrant

  - by neezer

  Does anyone have a clear step-by-step guide for setting up a shared tmux session on a Vagrant vbox that my coworkers (on our local office lan) could SSH into? The articles I've found online only seem to cover setting this up from machine to machine (no virtualbox setups), and I'm not very good at networking, so I haven't been able to extrapolate a solution... We're all running the latest Macs in our office, btw. Here's one article I've found but haven't been able to get working with Vagrant: http://blog.voxdolo.me/remote-pairing-with-vim-and-tmux.html EDIT: To clarify, I don't really know how I should be setting up Vagrant to allow me to SSH into it from a machine outside the one hosting the VM. The article above suggests that I add the tunnels host on my physical machine running the VM (here-on referred to as the MBP), so I did that. Next is the ProxyCommand host declaration, which I have also assumed should live on the MBP. So next I try SSHing into the MBP from a guest machine (another separate physical machine on my network), and that seems to work... but that only gets me into the MBP, not the Vagrant image running on the MBP. I normally login Vagrant image on the MBP via vagrant ssh (per the docs), and I know how to forward ports on the Vagrant VM to the MBP, but it's unclear to me how I could forward ports/SSH from the MBP to the Vagrant VM, which I assume I would need to do so that my guest machine could SSH in--through the MBP--to my Vagrant image. That, in a nutshell, is what I'm trying to accomplish. I do my development work in Vagrant VMs which keeps my MBP nice and clean of any dev-related cruft and also keeps my dev environments totally isolated from one another, yet I would like to start pair-programming with my coworkers via tmux, thus the reason why I've asked this question. I would like to accomplish all of this without setting up an additional user account on the MBP, or giving my coworkers access to my local user account on the MBP to get to my Vagrant VM, if that's at all possible.

  Read the article

• Windows 7 x64 RTM USB Port Has Power But Won't Recognize Mouse/Keyboard/Anything

  - by ben

  I have an odd error that doesn't seem to fit in with any of the other odd Windows 7 x64 USB errors that have been kicked up on Google. Here we go: Uninstalled Tortoise SVN and clicked restart computer. My machine had been up for around 28 days On reboot my mouse and keyboard failed to work anymore, couldn't log in. Tried every USB port I have on my Dell 390 and the ports on my Dell 19's, nothing worked. They had power but Windows would not respond when I manipulated the keyboard/mouse. Rebooted my computer and pressed F2 to get into bios, my keyboard is working fine in bios. Keyboard and mouse work fine on other computers when using USB. Found adapters for keyboard and mouse to convert from USB to PS/2 ports, works fine. I'm actually typing this question on the same keyboard, same computer, just using PS/2 ports for my mouse and keyboard. It appears to be a Windows 7 x64 issue. Other things I have tried: Multiple other mice and keyboards, iphone, all with no luck. Each one gets power, but Windows never tries to install drivers or sees that they are connected. Uninstall and reinstall all USB drivers. Drives uninstall and reinstall fine and report no errors in Control Panel. In Power Management I disallow Windows from turning off USB ports to save power Installed the latest nVidia drivers for my graphics card, no change. Anyplace else I can look/try? Thanks!

  Read the article

• Wake OSX 10.8 over WiFi (WoWL - Wake on WiFi Lan)

  - by WrinkledCheese

  I have a stack of Apple Mac minis running SSH servers for remote login. The problem is that I can't seem to get them to wake up. From what I gathered, as of Mac OSX 10.7 you required to have a boot time option set - darkwake=0 10.7 and darkwake=no 10.8. So I tried this and then I came to the realization that this will probably work for a wired connection but I'm using WiFi. My wired connections are used for another local subnet without Internet access, so I have to get it to wake on WiFi. I realize that I can just set the stack of Mac minis to just not sleep, but I'm looking for a sleep enabled option. These services don't require initial response speed as once the connection is made they will be active and once they are no longer active they will hopefully go back to sleep. I have a FreeBSD box running avahi-daemon in order to try and wake the Macs with the Bonjour Service but it doesn't seem to work. I tried registering the service as Gordon suggested in the below post, but that just makes it so that there isn't a timeout when discovering services and resolving them. It still doesn't allow ssh connections to port 22 when it's asleep. For reference, I want what seems like what Gordon Davisson explained on this question: Wake on Demand for Apache server in OS X 10.8

  Read the article

• Windows XP Boot Issue - Diagnosing A Hard Drive Failure

  - by duffymo

  My five-year-old HP desktop running Windows XP SP3 wouldn't boot from the hard drive yesterday afternoon. I would see the boot sequence begin, then nothing but a black screen. Fortunately, I had just done an Acronis backup to my external drive in the morning, and I have a bootable USB key. I put the USB key into the drive, powered up the machine, and put the USB key first in line in the boot sequence. Voila! My machine came alive. But now I'm confused as to what the problem is and what to do next. I assumed that my hard drive was toast. But now that the machine is alive I can see files on my C: drive that have changes I made just yesterday. Clearly the drive is not dead. Here are my questions: What could explain my inability to boot from the hard drive? What would a remedy be? What's my best course of action? Should I replace the hard drive with a new one? If I replace the hard drive, do I reinstall the OS and apply the backup I did yesterday? If I decide that re-installing Windows XP makes no sense, how do I get back the Acronis backup that I did yesterday? I don't want to lose that. UPDATE: I just learned one more key fact. I'm having some work done on my house. I neglected to shut my machine down before the contractor came. My wife said he shut down the power to do some work on a circuit and then powered the house back up. I have a surge protector, but is it possible that cycling the power did some damage?

  Read the article

• Router block some sites

  - by Mahesha999

  Hi I was using ADSL Modem/Router earlier. The device is quite old Pronet PN-ADSL 101 E/U model (pics: http://bit.ly/P2YaWy, http://bit.ly/OA700l) Since it had only one RJ45 out, I bought new Wireless Router TPLink TL-WR941ND. It has 4 RJ45 out and 3 wireless antennas. I configured my old router in bridge. Now, if I have to connect my pc to Internet through the old router, I have to enter username and password. Then I connected the RJ45 output of old router to the WAN in of new router. and ran the CD of new router. It configured the new router in PPPoE by saving the username and password in router to dial automatically. So now I have to just plug in the wires in my new routers any RJ45 out. I am able to access the Internet when I connect through new router (both wired and wirelessly), but some sites are getting blocked. Most notably yahoo.com (though ymail.com is working), Microsoft.com. msn.com. These sites work perfectly fine when I connect my pc directly to my old router and enter username and password manually. (However others like google.com. facebook.com works fine when connect through new router) So here these some sites need some parameter set but I am unable to find them out. Can anyone help me. My friend said he also faced same problem. Surprisingly he advised me to see if the same websites will work through Opera turbo mode and boom they worked. So what could be the problem?

  Read the article

• Windows 7 taskbar groups to use vertical menus only, not thumbnails?

  - by Justin Grant

  I frequently have 10 or more windows of the same application (e.g. Outlook, Word, IE, etc.) open at one time. Windows 7's new taskbar grouping thumbnail feature shows a preview of open windows (aka thumbnails) when you single-click on the taskbar group for that application. But when I have over 10 windows open (more thumbnails than will fit horizontally on my screen), Windows reverts to a vertical menu. This is disconcerting since I need to train myself to deal with two separate behaviors and can never anticipate what I'm going to see when I click on a taskbar group. Furthermore, I find the thumbnails more difficult to visually scan through (vs. the vertical menu) because only 1-2 words of each window's title are shown. Typically that's not enough text to disambiguate and help me find the right window. I'd like to force Windows 7's taskbar grouping to always show a vertical menu (like in XP) instead of sometimes showing thumbnail previews and sometimes showing a vertical menu. Anyone know how (whether?) this can be done? UPDATE: BTW, I'm running the RTM version (build 7600) of Windows 7. There are apparently other solutions out there which work on earlier builds, but which don't work on the RTM build.

  Read the article

• Windows 7 VPN Error 619

  - by TravisPUK

  So I am running Windows 7 Enterprise. This morning I was able to VPN using the built in VPN (Connect to Work Network etc). I had to change my network's IP address range and now the VPN will not work. It just stalls on the Verifying user name and password... message. But then it returns the 619 error. Anybody know why changing my machine's IP address would cause this problem? Where should I be looking to try and fix this issue? I have tried this on a Windows XP machine that also had the IP address range change and this still connects fine using exactly the same connection details. EDIT The internal network range changed from 192.x.x.x to 10.x.x.x. This was done on the entire Active Directory. All machines are running fine and the Windows XP machine, that works going to the same client VPN mentioned above is on the same network. Both the XP and the Win 7 machines are using DHCP served by the Domain Controller. The client domain is not performing any IP range checks/restrictions. The VPN is outside the internal network, connection is being made via the Internet and not passing through any other machine, other than the normal domain machines, ie DNS etc. This is passing through a router and the router has the relevant VPN passthrough options configured. All internal machines are working correctly with other forms of VPN, ie Cisco, Sonic etc (these were tested on other machines, they are not installed on the Vista or Win7 machines). After further testing, this is occurring on all Win7 and Vista machines where they can no longer connect to the client VPN, however all XP machines can still connect fine. This has been tested on three Vista, two Win7 and five XP machines. All machines are on DHCP and tests have been done with both the firewalls turned on and off, as well as with fixed IPs being used. Thanks Travis

  Read the article

• Programs don't have permissions when using absolute path

  - by Markos

  I have asked this on askubuntu but didn't get a single response in days, so I will try it here. I have directory structure like this: /path/dir1 - all users in group1 must have rwx permissions, including subdirs and newly created dirs /path/dir1/dir2 - also users in group2 must have rwx permissions So what I tried is that I used ACL. getfacl /path/dir1 # file: /path/dir1 # owner: root # group: nogroup user::rwx group::--- group:group1:rwx mask::rwx other::--- default:user::rwx default:group::--- default:group:group1:rwx default:mask::rwx default:other::--- getfacl /path/dir1/dir2 # file: /path/dir1/dir2 # owner: root # group: nogroup user::rwx group::--- group:group1:rwx group:group2:rwx mask::rwx other::--- default:user::rwx default:group::--- default:group:group1:rwx default:group:group2:rwx default:mask::rwx default:other::--- That shows that I have granted rwx to group1 in /path/dir1 and rwx to group1 and group2 in /path/dir1/dir2. Now it gets interesting. Let's assume, that user2 is member of group2. If I issue commands as user2: cd /path/dir1/dir2 mkdir foo Then folder is succesfully created. However, if I do this: mkdir /path/dir1/dir2/foo I get permission denied error. I have tried extensively to resolve the problem. What I have found is that ACL is to blame. If I add permissions to group2 in /path/dir1 it starts to work. Also if I completely remove /path/dir1 ACL it starts to work. Obviously I am missing something VERY basic. I don't have much experience with linux, but this is a no-brainer on Windows. I have spent way too many hours to resolve this basic requirement. If you need more information, I will try to update the question, so feel free to ask!

  Read the article

• OpenVZ with brdiged interfaces and VLAN

  - by Deimosfr

  Hi, I've got a problem with OpenVZ with brdiged VLAN. Here is my configuration : +------+ +-------+ +-----------+ +---------+ br0 |VE101 | | | | OpenBSD |----->| Debian |------->| | | WAN |--->| Router | | OpenVZ | +------+ | | | Firewall |----->| br0 br1 | br1 +------+ +-------+ +-----------+ +---------+------->|VE102 | |br0 | | |VLAN br0.110 +------+ v +---------+ |VE103.110| +---------+ I can't make VLAN working on br0 (br0.110) and I would like to understand why. I don't have any switch so no problem with unmanageable switch. I've configured a VLAN interface on OpenBSD in /etc/hostname.vlan110 : inet 192.168.110.254 255.255.255.0 NONE vlan 110 vlandev sis1 And it seams working fine. I've also adapted my PF configuration to work with VLAN but I don't see any incoming traffic. On my Debian lenny, here is my interfaces configuration : # The loopback network interface auto lo iface lo inet loopback # br0 auto br0 iface br0 inet static address 192.168.100.1 netmask 255.255.255.0 gateway 192.168.100.254 network 192.168.100.0 broadcast 192.168.100.255 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off # VLAN 110 auto br0.110 iface br0.110 inet static address 192.168.110.1 netmask 255.255.255.0 network 192.168.110.0 gateway 192.168.110.254 broadcast 192.168.110.255 pre-up vconfig add br0 110 post-down vconfig rem br0.110 It looks like ok, but when I start my VE, here is the message : ... Configure veth devices: veth103.0 Adding interface veth103.0 to bridge br0.110 on CT0 for VE103 can't add veth103.0 to bridge br0.110: Operation not supported VE start in progress... So I've got one error here. I've followed this documentation http://wiki.openvz.org/VLAN but it doesn't work. I've certainly missed something but I don't know why. Someone could help me please ? Thanks

  Read the article

• Playing iPad to iPad Wifi games over PPTP VPN

  - by Pez Cuckow

  I'm trying to use a VPN to play iPad to iPad Wifi (Local) games over the internet. Normally you open the game on both iPad's, connect to the same Wifi point and they can "see" and speak to each other. I figure using a VPN I can put them both on the same network (either both on the VPN or one on the "real" network and one on the VPN). On my router I've set up PPTP VPN with the ip range 192.168.1.2-50, where the PC's on the real local network are assigned 192.168.1.100+ When I connect one of the iPads to the VPN, using an external WiFi network (BT Openzone) I can ping it as expected (from any machine on the local network). However the iPad's cannot "see" each other and none of the Wifi-Wifi games work. I've also tried connecting both iPad's to the same VPN, with the result the same. All machines on the local network (and those on the VPN) can ping the iPad's but none of the Wifi to Wifi games work. I've set both iPads to send all trafic over the VPN and if I check their external IP's they match that of the real network. Does anyone know how to fix this? And/or what is causing it? Or what further debug information I can provide? Note: I don't feel this is iPad specific so would prefer if this isn't moved to a Apple SuperUser equivalent

  Read the article

• server and user directly connected no pinging...

  - by jtzero

  I have a server(fedora 12) with two nics on it, directly connected to say 192.168.1.0 and 192.168.2.0 the route table looks like this Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 192.168.1.1 255.255.255.0 U 0 0 0 eth0 192.168.2.0 * 255.255.255.0 U 0 0 0 eth1 eth0 = 192.168.1.15 eth1 = 192.168.2.1 and a directly connected user (Mythdora) on the 192.168.2.0 network with ip 192.168.2.2 and route table like so Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 * 255.255.255.0 U 0 0 0 eth0 the cable is a crossover and it works all three nics work -- connected my laptop to either end and assign it a valid 192.168.2.0 ip the pings will work. In fact if I disconnect the server side and plug the eth cable into the laptop and have thte box ping the laptop continually remove the eth cable and plug it back into the server both sides ping... unfortunately the box realizing it's connected to a different pc wipes its route table after say ten minutes or so. if I do a trace route from a box on the 1.0 network to the servers 192.168.2.1 interface never get a reply from it. as a note at one point I could ping the server from the 192.168.2.2 box but the server couldnt ping the 192.168.2.2 box.

  Read the article

• Setting Outlook Web Access as default mail client in Firefox

  - by Barton Chittenden

  The company that I work for is nice enough to let me use Linux for work, but they use Outlook. I've been using Outlook Web Access (OWA) as my mail client, which is more or less acceptable. The only problem is that whenever I click on a mailto link or use the "Send Link" menu option in firefox, I'm prompted to use evolution. Since connecting to an exchange server through evolution seems to be sketchy at best, I would like to set OWA as my default mail client. I'm using Firefox 3.6.13 Here's what I've found so far: Default mail client can be found at Edit Menu -> Preferences -> Applications Tab -> mailto When I click on the drop down menu, one of the options is "Application Details" This shows two options by default: Google Yahoo! Mail Each of these shows how to launch that service. For Gmail: https://mail.google.com/mail/?extsrc=mailto&url=%s For Yahoo!: http://compose.mail.yahoo.com/?To=%s I presume that Outlook Web Access has something similar. Based on the googling that I've done so far, I think that this should look something like this: https://<server name>/owa/?cmd=compose... A little experimentation on my part shows that the following will compose a message: https://<email server>/owa/?ae=Item&a=New&t=IPM.Note but I still don't know how to specify recipient, subject or body of the email to be composed... What I want to know is a) does anyone know the URL parameters to compose a mailto in Outlook Web Access, including subject, recipient and body? else b) can someone give me a decent pointer for where to get this information?

  Read the article

• MAMP Pro .xip.io, fixing urls with htaccess

  - by user3540018

  I've got all my websites set up with MAMP Pro. For instance, I got it set up, so when I go to example.com, the browser displays the website that's set up on my iMac. Now, I wanna get MAMP Pro to work so I can view my website on my other computers/devices (which are all hooked up on the same network.) So far all I had to do is check the checkbox "via Xip.io (LAN only)", and now I can view my website on my other computers/devices within my LAN by simply going to example.com.10.0.1.13.xip.io. Problem is, whenever I'm on this other computer/device, when I click on the links, I get 404 error. ie. whenever I go to example.com/news, I get the 404. But when I go to example.com.10.0.1.13.xip.io/news, THEN I get the right page. So in order to solve my problem I need to rewrite the urls. So whenever someone clicks on a link ie. goes straight to example.com/news, he'll go to example.com.10.0.1.13.xip.io/news. I don't want to change all the links in my MySQL file, but I believe I can do it simply with the htaccess file. I've opened the htaccess file and added the last two lines, but it just doesn't work. <IfModule mod_rewrite.c> RewriteEngine On # Send would-be 404 requests to Craft RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/(favicon\.ico|apple-touch-icon.*\.png)$ [NC] RewriteRule (.+) index.php?p=$1 [QSA,L] RewriteCond %{HTTP_HOST} ^example\.com RewriteRule ^(.*)$ http://www.example.com.10.0.1.13.xip.io/$1 [R=permanent,L] </IfModule> Or perhaps I don't need to change the htaccess file, is there something that I could be missing in the MAMP Pro settings, or perhaps a MAMP extension that I need?

  Read the article

• Windows 7 Not Recognizing Camera Nor iPhone as Camera

  - by taudep

  I've been struggling with this one for a few days. I've recently upgraded an older computer to Windows 7 Home Premium. Neither my digital camera (A Canon SD1200IS) nor iPhone are ever detected as cameras, nor ever show up as accessable in Explorer. With the Canon camera, no driver is required. It's supposed to work with the default Windows 7 drivers. However, in the Control Panel's Device Manager, I'm always seeing a yellow icon next to the "Canon Digital Camera" device. I've uninstalled the device and let Windows attempt to reinstall, but it can never find a driver to install. With the iPhone, it's very similar. One big difference, though, is that iTunes can see the iPhone and back it up, etc. However, again when I go to the Device Manager, there's a yellow icon next to the iPhone. I've uninstalled iTunes, reinstalled, rebooted, deleted drivers, and let Window try to reinstall the driver, but it can never find the driver. So there seems to be some correlation that my machine can't detect cameras properly, and that it might be even a lower-level type of driver I'm struggling with. I know that USB however, does work, because I have have an external drive hooked into the machine. I've gone through the web and tried two hours worth of fixes, without success. I feel like if I can get the Canon camera detected, then the iPhone will be on it's way to being fixed too. BTW, I couldn't really find anything of use in the Event viewer. Any and all suggestions welcome.

  Read the article

< Previous Page | 713 714 715 716 717 718 719 720 721 722 723 724  | Next Page >